#ifndef QEMU_HW_ESP_H #define QEMU_HW_ESP_H #include "hw/scsi/scsi.h" #include "hw/sysbus.h" /* esp.c */ #define ESP_MAX_DEVS 7 typedef void (*ESPDMAMemoryReadWriteFunc)(void *opaque, uint8_t *buf, int len); void esp_init(hwaddr espaddr, int it_shift, ESPDMAMemoryReadWriteFunc dma_memory_read, ESPDMAMemoryReadWriteFunc dma_memory_write, void *dma_opaque, qemu_irq irq, qemu_irq *reset, qemu_irq *dma_enable); #define ESP_REGS 16 #define TI_BUFSZ 16 #define ESP_CMDBUF_SZ 32 typedef struct ESPState ESPState; struct ESPState { uint8_t rregs[ESP_REGS]; uint8_t wregs[ESP_REGS]; qemu_irq irq; uint8_t chip_id; bool tchi_written; int32_t ti_size; uint32_t ti_rptr, ti_wptr; uint32_t status; uint32_t dma; uint8_t ti_buf[TI_BUFSZ]; SCSIBus bus; SCSIDevice *current_dev; SCSIRequest *current_req; uint8_t cmdbuf[ESP_CMDBUF_SZ]; uint32_t cmdlen; uint32_t do_cmd; /* The amount of data left in the current DMA transfer. */ uint32_t dma_left; /* The size of the current DMA transfer. Zero if no transfer is in progress. */ uint32_t dma_counter; int dma_enabled; uint32_t async_len; uint8_t *async_buf; ESPDMAMemoryReadWriteFunc dma_memory_read; ESPDMAMemoryReadWriteFunc dma_memory_write; void *dma_opaque; void (*dma_cb)(ESPState *s); }; #define TYPE_ESP "esp" #define ESP_STATE(obj) OBJECT_CHECK(SysBusESPState, (obj), TYPE_ESP) typedef struct { /*< private >*/ SysBusDevice parent_obj; /*< public >*/ MemoryRegion iomem; uint32_t it_shift; ESPState esp; } SysBusESPState; #define ESP_TCLO 0x0 #define ESP_TCMID 0x1 #define ESP_FIFO 0x2 #define ESP_CMD 0x3 #define ESP_RSTAT 0x4 #define ESP_WBUSID 0x4 #define ESP_RINTR 0x5 #define ESP_WSEL 0x5 #define ESP_RSEQ 0x6 #define ESP_WSYNTP 0x6 #define ESP_RFLAGS 0x7 #define ESP_WSYNO 0x7 #define ESP_CFG1 0x8 #define ESP_RRES1 0x9 #define ESP_WCCF 0x9 #define ESP_RRES2 0xa #define ESP_WTEST 0xa #define ESP_CFG2 0xb #define ESP_CFG3 0xc #define ESP_RES3 0xd #define ESP_TCHI 0xe #define ESP_RES4 0xf #define CMD_DMA 0x80 #define CMD_CMD 0x7f #define CMD_NOP 0x00 #define CMD_FLUSH 0x01 #define CMD_RESET 0x02 #define CMD_BUSRESET 0x03 #define CMD_TI 0x10 #define CMD_ICCS 0x11 #define CMD_MSGACC 0x12 #define CMD_PAD 0x18 #define CMD_SATN 0x1a #define CMD_RSTATN 0x1b #define CMD_SEL 0x41 #define CMD_SELATN 0x42 #define CMD_SELATNS 0x43 #define CMD_ENSEL 0x44 #define CMD_DISSEL 0x45 #define STAT_DO 0x00 #define STAT_DI 0x01 #define STAT_CD 0x02 #define STAT_ST 0x03 #define STAT_MO 0x06 #define STAT_MI 0x07 #define STAT_PIO_MASK 0x06 #define STAT_TC 0x10 #define STAT_PE 0x20 #define STAT_GE 0x40 #define STAT_INT 0x80 #define BUSID_DID 0x07 #define INTR_FC 0x08 #define INTR_BS 0x10 #define INTR_DC 0x20 #define INTR_RST 0x80 #define SEQ_0 0x0 #define SEQ_CD 0x4 #define CFG1_RESREPT 0x40 #define TCHI_FAS100A 0x4 #define TCHI_AM53C974 0x12 void esp_dma_enable(ESPState *s, int irq, int level); void esp_request_cancelled(SCSIRequest *req); void esp_command_complete(SCSIRequest *req, uint32_t status, size_t resid); void esp_transfer_data(SCSIRequest *req, uint32_t len); void esp_hard_reset(ESPState *s); uint64_t esp_reg_read(ESPState *s, uint32_t saddr); void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val); extern const VMStateDescription vmstate_esp; #endif