/* * QEMU System Emulator block driver * * Copyright (c) 2003 Fabrice Bellard * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #ifndef BLOCK_INT_GLOBAL_STATE_H #define BLOCK_INT_GLOBAL_STATE_H #include "block/blockjob.h" #include "block/block_int-common.h" #include "qemu/hbitmap.h" #include "qemu/main-loop.h" /* * Global state (GS) API. These functions run under the BQL. * * See include/block/block-global-state.h for more information about * the GS API. */ /** * stream_start: * @job_id: The id of the newly-created job, or %NULL to use the * device name of @bs. * @bs: Block device to operate on. * @base: Block device that will become the new base, or %NULL to * flatten the whole backing file chain onto @bs. * @backing_file_str: The file name that will be written to @bs as the * the new backing file if the job completes. Ignored if @base is %NULL. * @creation_flags: Flags that control the behavior of the Job lifetime. * See @BlockJobCreateFlags * @speed: The maximum speed, in bytes per second, or 0 for unlimited. * @on_error: The action to take upon error. * @filter_node_name: The node name that should be assigned to the filter * driver that the stream job inserts into the graph above * @bs. NULL means that a node name should be autogenerated. * @errp: Error object. * * Start a streaming operation on @bs. Clusters that are unallocated * in @bs, but allocated in any image between @base and @bs (both * exclusive) will be written to @bs. At the end of a successful * streaming job, the backing file of @bs will be changed to * @backing_file_str in the written image and to @base in the live * BlockDriverState. */ void stream_start(const char *job_id, BlockDriverState *bs, BlockDriverState *base, const char *backing_file_str, BlockDriverState *bottom, int creation_flags, int64_t speed, BlockdevOnError on_error, const char *filter_node_name, Error **errp); /** * commit_start: * @job_id: The id of the newly-created job, or %NULL to use the * device name of @bs. * @bs: Active block device. * @top: Top block device to be committed. * @base: Block device that will be written into, and become the new top. * @creation_flags: Flags that control the behavior of the Job lifetime. * See @BlockJobCreateFlags * @speed: The maximum speed, in bytes per second, or 0 for unlimited. * @on_error: The action to take upon error. * @backing_file_str: String to use as the backing file in @top's overlay * @filter_node_name: The node name that should be assigned to the filter * driver that the commit job inserts into the graph above @top. NULL means * that a node name should be autogenerated. * @errp: Error object. * */ void commit_start(const char *job_id, BlockDriverState *bs, BlockDriverState *base, BlockDriverState *top, int creation_flags, int64_t speed, BlockdevOnError on_error, const char *backing_file_str, const char *filter_node_name, Error **errp); /** * commit_active_start: * @job_id: The id of the newly-created job, or %NULL to use the * device name of @bs. * @bs: Active block device to be committed. * @base: Block device that will be written into, and become the new top. * @creation_flags: Flags that control the behavior of the Job lifetime. * See @BlockJobCreateFlags * @speed: The maximum speed, in bytes per second, or 0 for unlimited. * @on_error: The action to take upon error. * @filter_node_name: The node name that should be assigned to the filter * driver that the commit job inserts into the graph above @bs. NULL means that * a node name should be autogenerated. * @cb: Completion function for the job. * @opaque: Opaque pointer value passed to @cb. * @auto_complete: Auto complete the job. * @errp: Error object. * */ BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs, BlockDriverState *base, int creation_flags, int64_t speed, BlockdevOnError on_error, const char *filter_node_name, BlockCompletionFunc *cb, void *opaque, bool auto_complete, Error **errp); /* * mirror_start: * @job_id: The id of the newly-created job, or %NULL to use the * device name of @bs. * @bs: Block device to operate on. * @target: Block device to write to. * @replaces: Block graph node name to replace once the mirror is done. Can * only be used when full mirroring is selected. * @creation_flags: Flags that control the behavior of the Job lifetime. * See @BlockJobCreateFlags * @speed: The maximum speed, in bytes per second, or 0 for unlimited. * @granularity: The chosen granularity for the dirty bitmap. * @buf_size: The amount of data that can be in flight at one time. * @mode: Whether to collapse all images in the chain to the target. * @backing_mode: How to establish the target's backing chain after completion. * @zero_target: Whether the target should be explicitly zero-initialized * @on_source_error: The action to take upon error reading from the source. * @on_target_error: The action to take upon error writing to the target. * @unmap: Whether to unmap target where source sectors only contain zeroes. * @filter_node_name: The node name that should be assigned to the filter * driver that the mirror job inserts into the graph above @bs. NULL means that * a node name should be autogenerated. * @copy_mode: When to trigger writes to the target. * @errp: Error object. * * Start a mirroring operation on @bs. Clusters that are allocated * in @bs will be written to @target until the job is cancelled or * manually completed. At the end of a successful mirroring job, * @bs will be switched to read from @target. */ void mirror_start(const char *job_id, BlockDriverState *bs, BlockDriverState *target, const char *replaces, int creation_flags, int64_t speed, uint32_t granularity, int64_t buf_size, MirrorSyncMode mode, BlockMirrorBackingMode backing_mode, bool zero_target, BlockdevOnError on_source_error, BlockdevOnError on_target_error, bool unmap, const char *filter_node_name, MirrorCopyMode copy_mode, Error **errp); /* * backup_job_create: * @job_id: The id of the newly-created job, or %NULL to use the * device name of @bs. * @bs: Block device to operate on. * @target: Block device to write to. * @speed: The maximum speed, in bytes per second, or 0 for unlimited. * @sync_mode: What parts of the disk image should be copied to the destination. * @sync_bitmap: The dirty bitmap if sync_mode is 'bitmap' or 'incremental' * @bitmap_mode: The bitmap synchronization policy to use. * @perf: Performance options. All actual fields assumed to be present, * all ".has_*" fields are ignored. * @on_source_error: The action to take upon error reading from the source. * @on_target_error: The action to take upon error writing to the target. * @creation_flags: Flags that control the behavior of the Job lifetime. * See @BlockJobCreateFlags * @cb: Completion function for the job. * @opaque: Opaque pointer value passed to @cb. * @txn: Transaction that this job is part of (may be NULL). * * Create a backup operation on @bs. Clusters in @bs are written to @target * until the job is cancelled or manually completed. */ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs, BlockDriverState *target, int64_t speed, MirrorSyncMode sync_mode, BdrvDirtyBitmap *sync_bitmap, BitmapSyncMode bitmap_mode, bool compress, const char *filter_node_name, BackupPerf *perf, BlockdevOnError on_source_error, BlockdevOnError on_target_error, int creation_flags, BlockCompletionFunc *cb, void *opaque, JobTxn *txn, Error **errp); BdrvChild *bdrv_root_attach_child(BlockDriverState *child_bs, const char *child_name, const BdrvChildClass *child_class, BdrvChildRole child_role, uint64_t perm, uint64_t shared_perm, void *opaque, Error **errp); void GRAPH_WRLOCK bdrv_root_unref_child(BdrvChild *child); void GRAPH_RDLOCK bdrv_get_cumulative_perm(BlockDriverState *bs, uint64_t *perm, uint64_t *shared_perm); /** * Sets a BdrvChild's permissions. Avoid if the parent is a BDS; use * bdrv_child_refresh_perms() instead and make the parent's * .bdrv_child_perm() implementation return the correct values. */ int GRAPH_RDLOCK bdrv_child_try_set_perm(BdrvChild *c, uint64_t perm, uint64_t shared, Error **errp); /** * Calls bs->drv->bdrv_child_perm() and updates the child's permission * masks with the result. * Drivers should invoke this function whenever an event occurs that * makes their .bdrv_child_perm() implementation return different * values than before, but which will not result in the block layer * automatically refreshing the permissions. */ int GRAPH_RDLOCK bdrv_child_refresh_perms(BlockDriverState *bs, BdrvChild *c, Error **errp); bool GRAPH_RDLOCK bdrv_recurse_can_replace(BlockDriverState *bs, BlockDriverState *to_replace); /* * Default implementation for BlockDriver.bdrv_child_perm() that can * be used by block filters and image formats, as long as they use the * child_of_bds child class and set an appropriate BdrvChildRole. */ void bdrv_default_perms(BlockDriverState *bs, BdrvChild *c, BdrvChildRole role, BlockReopenQueue *reopen_queue, uint64_t perm, uint64_t shared, uint64_t *nperm, uint64_t *nshared); void blk_dev_change_media_cb(BlockBackend *blk, bool load, Error **errp); bool blk_dev_has_removable_media(BlockBackend *blk); void blk_dev_eject_request(BlockBackend *blk, bool force); bool blk_dev_is_medium_locked(BlockBackend *blk); void bdrv_restore_dirty_bitmap(BdrvDirtyBitmap *bitmap, HBitmap *backup); void bdrv_set_monitor_owned(BlockDriverState *bs); void blockdev_close_all_bdrv_states(void); BlockDriverState *bds_tree_init(QDict *bs_opts, Error **errp); /** * Simple implementation of bdrv_co_create_opts for protocol drivers * which only support creation via opening a file * (usually existing raw storage device) */ int coroutine_fn bdrv_co_create_opts_simple(BlockDriver *drv, const char *filename, QemuOpts *opts, Error **errp); BdrvDirtyBitmap *block_dirty_bitmap_lookup(const char *node, const char *name, BlockDriverState **pbs, Error **errp); BdrvDirtyBitmap *block_dirty_bitmap_merge(const char *node, const char *target, BlockDirtyBitmapOrStrList *bms, HBitmap **backup, Error **errp); BdrvDirtyBitmap *block_dirty_bitmap_remove(const char *node, const char *name, bool release, BlockDriverState **bitmap_bs, Error **errp); BlockDriverState *bdrv_skip_implicit_filters(BlockDriverState *bs); /** * bdrv_add_aio_context_notifier: * * If a long-running job intends to be always run in the same AioContext as a * certain BDS, it may use this function to be notified of changes regarding the * association of the BDS to an AioContext. * * attached_aio_context() is called after the target BDS has been attached to a * new AioContext; detach_aio_context() is called before the target BDS is being * detached from its old AioContext. */ void bdrv_add_aio_context_notifier(BlockDriverState *bs, void (*attached_aio_context)(AioContext *new_context, void *opaque), void (*detach_aio_context)(void *opaque), void *opaque); /** * bdrv_remove_aio_context_notifier: * * Unsubscribe of change notifications regarding the BDS's AioContext. The * parameters given here have to be the same as those given to * bdrv_add_aio_context_notifier(). */ void bdrv_remove_aio_context_notifier(BlockDriverState *bs, void (*aio_context_attached)(AioContext *, void *), void (*aio_context_detached)(void *), void *opaque); /** * End all quiescent sections started by bdrv_drain_all_begin(). This is * needed when deleting a BDS before bdrv_drain_all_end() is called. * * NOTE: this is an internal helper for bdrv_close() *only*. No one else * should call it. */ void bdrv_drain_all_end_quiesce(BlockDriverState *bs); #endif /* BLOCK_INT_GLOBAL_STATE_H */