/* * ASPEED AST2400 SMC Controller (SPI Flash Only) * * Copyright (C) 2016 IBM Corp. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "sysemu/sysemu.h" #include "qemu/log.h" #include "include/qemu/error-report.h" #include "exec/address-spaces.h" #include "hw/ssi/aspeed_smc.h" /* CE Type Setting Register */ #define R_CONF (0x00 / 4) #define CONF_LEGACY_DISABLE (1 << 31) #define CONF_ENABLE_W4 20 #define CONF_ENABLE_W3 19 #define CONF_ENABLE_W2 18 #define CONF_ENABLE_W1 17 #define CONF_ENABLE_W0 16 #define CONF_FLASH_TYPE4 8 #define CONF_FLASH_TYPE3 6 #define CONF_FLASH_TYPE2 4 #define CONF_FLASH_TYPE1 2 #define CONF_FLASH_TYPE0 0 #define CONF_FLASH_TYPE_NOR 0x0 #define CONF_FLASH_TYPE_NAND 0x1 #define CONF_FLASH_TYPE_SPI 0x2 /* CE Control Register */ #define R_CE_CTRL (0x04 / 4) #define CTRL_EXTENDED4 4 /* 32 bit addressing for SPI */ #define CTRL_EXTENDED3 3 /* 32 bit addressing for SPI */ #define CTRL_EXTENDED2 2 /* 32 bit addressing for SPI */ #define CTRL_EXTENDED1 1 /* 32 bit addressing for SPI */ #define CTRL_EXTENDED0 0 /* 32 bit addressing for SPI */ /* Interrupt Control and Status Register */ #define R_INTR_CTRL (0x08 / 4) #define INTR_CTRL_DMA_STATUS (1 << 11) #define INTR_CTRL_CMD_ABORT_STATUS (1 << 10) #define INTR_CTRL_WRITE_PROTECT_STATUS (1 << 9) #define INTR_CTRL_DMA_EN (1 << 3) #define INTR_CTRL_CMD_ABORT_EN (1 << 2) #define INTR_CTRL_WRITE_PROTECT_EN (1 << 1) /* CEx Control Register */ #define R_CTRL0 (0x10 / 4) #define CTRL_CMD_SHIFT 16 #define CTRL_CMD_MASK 0xff #define CTRL_DUMMY_HIGH_SHIFT 14 #define CTRL_AST2400_SPI_4BYTE (1 << 13) #define CTRL_DUMMY_LOW_SHIFT 6 /* 2 bits [7:6] */ #define CTRL_CE_STOP_ACTIVE (1 << 2) #define CTRL_CMD_MODE_MASK 0x3 #define CTRL_READMODE 0x0 #define CTRL_FREADMODE 0x1 #define CTRL_WRITEMODE 0x2 #define CTRL_USERMODE 0x3 #define R_CTRL1 (0x14 / 4) #define R_CTRL2 (0x18 / 4) #define R_CTRL3 (0x1C / 4) #define R_CTRL4 (0x20 / 4) /* CEx Segment Address Register */ #define R_SEG_ADDR0 (0x30 / 4) #define SEG_END_SHIFT 24 /* 8MB units */ #define SEG_END_MASK 0xff #define SEG_START_SHIFT 16 /* address bit [A29-A23] */ #define SEG_START_MASK 0xff #define R_SEG_ADDR1 (0x34 / 4) #define R_SEG_ADDR2 (0x38 / 4) #define R_SEG_ADDR3 (0x3C / 4) #define R_SEG_ADDR4 (0x40 / 4) /* Misc Control Register #1 */ #define R_MISC_CTRL1 (0x50 / 4) /* Misc Control Register #2 */ #define R_MISC_CTRL2 (0x54 / 4) /* DMA Control/Status Register */ #define R_DMA_CTRL (0x80 / 4) #define DMA_CTRL_DELAY_MASK 0xf #define DMA_CTRL_DELAY_SHIFT 8 #define DMA_CTRL_FREQ_MASK 0xf #define DMA_CTRL_FREQ_SHIFT 4 #define DMA_CTRL_MODE (1 << 3) #define DMA_CTRL_CKSUM (1 << 2) #define DMA_CTRL_DIR (1 << 1) #define DMA_CTRL_EN (1 << 0) /* DMA Flash Side Address */ #define R_DMA_FLASH_ADDR (0x84 / 4) /* DMA DRAM Side Address */ #define R_DMA_DRAM_ADDR (0x88 / 4) /* DMA Length Register */ #define R_DMA_LEN (0x8C / 4) /* Checksum Calculation Result */ #define R_DMA_CHECKSUM (0x90 / 4) /* Misc Control Register #2 */ #define R_TIMINGS (0x94 / 4) /* SPI controller registers and bits */ #define R_SPI_CONF (0x00 / 4) #define SPI_CONF_ENABLE_W0 0 #define R_SPI_CTRL0 (0x4 / 4) #define R_SPI_MISC_CTRL (0x10 / 4) #define R_SPI_TIMINGS (0x14 / 4) #define ASPEED_SMC_R_SPI_MAX (0x20 / 4) #define ASPEED_SMC_R_SMC_MAX (0x20 / 4) #define ASPEED_SOC_SMC_FLASH_BASE 0x10000000 #define ASPEED_SOC_FMC_FLASH_BASE 0x20000000 #define ASPEED_SOC_SPI_FLASH_BASE 0x30000000 #define ASPEED_SOC_SPI2_FLASH_BASE 0x38000000 /* Flash opcodes. */ #define SPI_OP_READ 0x03 /* Read data bytes (low frequency) */ /* * Default segments mapping addresses and size for each slave per * controller. These can be changed when board is initialized with the * Segment Address Registers. */ static const AspeedSegments aspeed_segments_legacy[] = { { 0x10000000, 32 * 1024 * 1024 }, }; static const AspeedSegments aspeed_segments_fmc[] = { { 0x20000000, 64 * 1024 * 1024 }, /* start address is readonly */ { 0x24000000, 32 * 1024 * 1024 }, { 0x26000000, 32 * 1024 * 1024 }, { 0x28000000, 32 * 1024 * 1024 }, { 0x2A000000, 32 * 1024 * 1024 } }; static const AspeedSegments aspeed_segments_spi[] = { { 0x30000000, 64 * 1024 * 1024 }, }; static const AspeedSegments aspeed_segments_ast2500_fmc[] = { { 0x20000000, 128 * 1024 * 1024 }, /* start address is readonly */ { 0x28000000, 32 * 1024 * 1024 }, { 0x2A000000, 32 * 1024 * 1024 }, }; static const AspeedSegments aspeed_segments_ast2500_spi1[] = { { 0x30000000, 32 * 1024 * 1024 }, /* start address is readonly */ { 0x32000000, 96 * 1024 * 1024 }, /* end address is readonly */ }; static const AspeedSegments aspeed_segments_ast2500_spi2[] = { { 0x38000000, 32 * 1024 * 1024 }, /* start address is readonly */ { 0x3A000000, 96 * 1024 * 1024 }, /* end address is readonly */ }; static const AspeedSMCController controllers[] = { { .name = "aspeed.smc.smc", .r_conf = R_CONF, .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 5, .segments = aspeed_segments_legacy, .flash_window_base = ASPEED_SOC_SMC_FLASH_BASE, .flash_window_size = 0x6000000, .has_dma = false, .nregs = ASPEED_SMC_R_SMC_MAX, }, { .name = "aspeed.smc.fmc", .r_conf = R_CONF, .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 5, .segments = aspeed_segments_fmc, .flash_window_base = ASPEED_SOC_FMC_FLASH_BASE, .flash_window_size = 0x10000000, .has_dma = true, .nregs = ASPEED_SMC_R_MAX, }, { .name = "aspeed.smc.spi", .r_conf = R_SPI_CONF, .r_ce_ctrl = 0xff, .r_ctrl0 = R_SPI_CTRL0, .r_timings = R_SPI_TIMINGS, .conf_enable_w0 = SPI_CONF_ENABLE_W0, .max_slaves = 1, .segments = aspeed_segments_spi, .flash_window_base = ASPEED_SOC_SPI_FLASH_BASE, .flash_window_size = 0x10000000, .has_dma = false, .nregs = ASPEED_SMC_R_SPI_MAX, }, { .name = "aspeed.smc.ast2500-fmc", .r_conf = R_CONF, .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 3, .segments = aspeed_segments_ast2500_fmc, .flash_window_base = ASPEED_SOC_FMC_FLASH_BASE, .flash_window_size = 0x10000000, .has_dma = true, .nregs = ASPEED_SMC_R_MAX, }, { .name = "aspeed.smc.ast2500-spi1", .r_conf = R_CONF, .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 2, .segments = aspeed_segments_ast2500_spi1, .flash_window_base = ASPEED_SOC_SPI_FLASH_BASE, .flash_window_size = 0x8000000, .has_dma = false, .nregs = ASPEED_SMC_R_MAX, }, { .name = "aspeed.smc.ast2500-spi2", .r_conf = R_CONF, .r_ce_ctrl = R_CE_CTRL, .r_ctrl0 = R_CTRL0, .r_timings = R_TIMINGS, .conf_enable_w0 = CONF_ENABLE_W0, .max_slaves = 2, .segments = aspeed_segments_ast2500_spi2, .flash_window_base = ASPEED_SOC_SPI2_FLASH_BASE, .flash_window_size = 0x8000000, .has_dma = false, .nregs = ASPEED_SMC_R_MAX, }, }; /* * The Segment Register uses a 8MB unit to encode the start address * and the end address of the mapping window of a flash SPI slave : * * | byte 1 | byte 2 | byte 3 | byte 4 | * +--------+--------+--------+--------+ * | end | start | 0 | 0 | * */ static inline uint32_t aspeed_smc_segment_to_reg(const AspeedSegments *seg) { uint32_t reg = 0; reg |= ((seg->addr >> 23) & SEG_START_MASK) << SEG_START_SHIFT; reg |= (((seg->addr + seg->size) >> 23) & SEG_END_MASK) << SEG_END_SHIFT; return reg; } static inline void aspeed_smc_reg_to_segment(uint32_t reg, AspeedSegments *seg) { seg->addr = ((reg >> SEG_START_SHIFT) & SEG_START_MASK) << 23; seg->size = (((reg >> SEG_END_SHIFT) & SEG_END_MASK) << 23) - seg->addr; } static bool aspeed_smc_flash_overlap(const AspeedSMCState *s, const AspeedSegments *new, int cs) { AspeedSegments seg; int i; for (i = 0; i < s->ctrl->max_slaves; i++) { if (i == cs) { continue; } aspeed_smc_reg_to_segment(s->regs[R_SEG_ADDR0 + i], &seg); if (new->addr + new->size > seg.addr && new->addr < seg.addr + seg.size) { qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment CS%d [ 0x%" HWADDR_PRIx" - 0x%"HWADDR_PRIx" ] overlaps with " "CS%d [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n", s->ctrl->name, cs, new->addr, new->addr + new->size, i, seg.addr, seg.addr + seg.size); return true; } } return false; } static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, uint64_t new) { AspeedSMCFlash *fl = &s->flashes[cs]; AspeedSegments seg; aspeed_smc_reg_to_segment(new, &seg); /* The start address of CS0 is read-only */ if (cs == 0 && seg.addr != s->ctrl->flash_window_base) { qemu_log_mask(LOG_GUEST_ERROR, "%s: Tried to change CS0 start address to 0x%" HWADDR_PRIx "\n", s->ctrl->name, seg.addr); seg.addr = s->ctrl->flash_window_base; new = aspeed_smc_segment_to_reg(&seg); } /* * The end address of the AST2500 spi controllers is also * read-only. */ if ((s->ctrl->segments == aspeed_segments_ast2500_spi1 || s->ctrl->segments == aspeed_segments_ast2500_spi2) && cs == s->ctrl->max_slaves && seg.addr + seg.size != s->ctrl->segments[cs].addr + s->ctrl->segments[cs].size) { qemu_log_mask(LOG_GUEST_ERROR, "%s: Tried to change CS%d end address to 0x%" HWADDR_PRIx "\n", s->ctrl->name, cs, seg.addr + seg.size); seg.size = s->ctrl->segments[cs].addr + s->ctrl->segments[cs].size - seg.addr; new = aspeed_smc_segment_to_reg(&seg); } /* Keep the segment in the overall flash window */ if (seg.addr + seg.size <= s->ctrl->flash_window_base || seg.addr > s->ctrl->flash_window_base + s->ctrl->flash_window_size) { qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment for CS%d is invalid : " "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n", s->ctrl->name, cs, seg.addr, seg.addr + seg.size); return; } /* Check start address vs. alignment */ if (seg.size && !QEMU_IS_ALIGNED(seg.addr, seg.size)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment for CS%d is not " "aligned : [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n", s->ctrl->name, cs, seg.addr, seg.addr + seg.size); } /* And segments should not overlap (in the specs) */ aspeed_smc_flash_overlap(s, &seg, cs); /* All should be fine now to move the region */ memory_region_transaction_begin(); memory_region_set_size(&fl->mmio, seg.size); memory_region_set_address(&fl->mmio, seg.addr - s->ctrl->flash_window_base); memory_region_set_enabled(&fl->mmio, true); memory_region_transaction_commit(); s->regs[R_SEG_ADDR0 + cs] = new; } static uint64_t aspeed_smc_flash_default_read(void *opaque, hwaddr addr, unsigned size) { qemu_log_mask(LOG_GUEST_ERROR, "%s: To 0x%" HWADDR_PRIx " of size %u" PRIx64 "\n", __func__, addr, size); return 0; } static void aspeed_smc_flash_default_write(void *opaque, hwaddr addr, uint64_t data, unsigned size) { qemu_log_mask(LOG_GUEST_ERROR, "%s: To 0x%" HWADDR_PRIx " of size %u: 0x%" PRIx64 "\n", __func__, addr, size, data); } static const MemoryRegionOps aspeed_smc_flash_default_ops = { .read = aspeed_smc_flash_default_read, .write = aspeed_smc_flash_default_write, .endianness = DEVICE_LITTLE_ENDIAN, .valid = { .min_access_size = 1, .max_access_size = 4, }, }; static inline int aspeed_smc_flash_mode(const AspeedSMCFlash *fl) { const AspeedSMCState *s = fl->controller; return s->regs[s->r_ctrl0 + fl->id] & CTRL_CMD_MODE_MASK; } static inline bool aspeed_smc_is_writable(const AspeedSMCFlash *fl) { const AspeedSMCState *s = fl->controller; return s->regs[s->r_conf] & (1 << (s->conf_enable_w0 + fl->id)); } static inline int aspeed_smc_flash_cmd(const AspeedSMCFlash *fl) { const AspeedSMCState *s = fl->controller; int cmd = (s->regs[s->r_ctrl0 + fl->id] >> CTRL_CMD_SHIFT) & CTRL_CMD_MASK; /* In read mode, the default SPI command is READ (0x3). In other * modes, the command should necessarily be defined */ if (aspeed_smc_flash_mode(fl) == CTRL_READMODE) { cmd = SPI_OP_READ; } if (!cmd) { qemu_log_mask(LOG_GUEST_ERROR, "%s: no command defined for mode %d\n", __func__, aspeed_smc_flash_mode(fl)); } return cmd; } static inline int aspeed_smc_flash_is_4byte(const AspeedSMCFlash *fl) { const AspeedSMCState *s = fl->controller; if (s->ctrl->segments == aspeed_segments_spi) { return s->regs[s->r_ctrl0] & CTRL_AST2400_SPI_4BYTE; } else { return s->regs[s->r_ce_ctrl] & (1 << (CTRL_EXTENDED0 + fl->id)); } } static inline bool aspeed_smc_is_ce_stop_active(const AspeedSMCFlash *fl) { const AspeedSMCState *s = fl->controller; return s->regs[s->r_ctrl0 + fl->id] & CTRL_CE_STOP_ACTIVE; } static void aspeed_smc_flash_select(AspeedSMCFlash *fl) { AspeedSMCState *s = fl->controller; s->regs[s->r_ctrl0 + fl->id] &= ~CTRL_CE_STOP_ACTIVE; qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl)); } static void aspeed_smc_flash_unselect(AspeedSMCFlash *fl) { AspeedSMCState *s = fl->controller; s->regs[s->r_ctrl0 + fl->id] |= CTRL_CE_STOP_ACTIVE; qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl)); } static uint32_t aspeed_smc_check_segment_addr(const AspeedSMCFlash *fl, uint32_t addr) { const AspeedSMCState *s = fl->controller; AspeedSegments seg; aspeed_smc_reg_to_segment(s->regs[R_SEG_ADDR0 + fl->id], &seg); if ((addr & (seg.size - 1)) != addr) { qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid address 0x%08x for CS%d segment : " "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n", s->ctrl->name, addr, fl->id, seg.addr, seg.addr + seg.size); } addr &= seg.size - 1; return addr; } static int aspeed_smc_flash_dummies(const AspeedSMCFlash *fl) { const AspeedSMCState *s = fl->controller; uint32_t r_ctrl0 = s->regs[s->r_ctrl0 + fl->id]; uint32_t dummy_high = (r_ctrl0 >> CTRL_DUMMY_HIGH_SHIFT) & 0x1; uint32_t dummy_low = (r_ctrl0 >> CTRL_DUMMY_LOW_SHIFT) & 0x3; return ((dummy_high << 2) | dummy_low) * 8; } static void aspeed_smc_flash_send_addr(AspeedSMCFlash *fl, uint32_t addr) { const AspeedSMCState *s = fl->controller; uint8_t cmd = aspeed_smc_flash_cmd(fl); /* Flash access can not exceed CS segment */ addr = aspeed_smc_check_segment_addr(fl, addr); ssi_transfer(s->spi, cmd); if (aspeed_smc_flash_is_4byte(fl)) { ssi_transfer(s->spi, (addr >> 24) & 0xff); } ssi_transfer(s->spi, (addr >> 16) & 0xff); ssi_transfer(s->spi, (addr >> 8) & 0xff); ssi_transfer(s->spi, (addr & 0xff)); } static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size) { AspeedSMCFlash *fl = opaque; AspeedSMCState *s = fl->controller; uint64_t ret = 0; int i; switch (aspeed_smc_flash_mode(fl)) { case CTRL_USERMODE: for (i = 0; i < size; i++) { ret |= ssi_transfer(s->spi, 0x0) << (8 * i); } break; case CTRL_READMODE: case CTRL_FREADMODE: aspeed_smc_flash_select(fl); aspeed_smc_flash_send_addr(fl, addr); /* * Use fake transfers to model dummy bytes. The value should * be configured to some non-zero value in fast read mode and * zero in read mode. */ for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) { ssi_transfer(fl->controller->spi, 0xFF); } for (i = 0; i < size; i++) { ret |= ssi_transfer(s->spi, 0x0) << (8 * i); } aspeed_smc_flash_unselect(fl); break; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid flash mode %d\n", __func__, aspeed_smc_flash_mode(fl)); } return ret; } static void aspeed_smc_flash_write(void *opaque, hwaddr addr, uint64_t data, unsigned size) { AspeedSMCFlash *fl = opaque; AspeedSMCState *s = fl->controller; int i; if (!aspeed_smc_is_writable(fl)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: flash is not writable at 0x%" HWADDR_PRIx "\n", __func__, addr); return; } switch (aspeed_smc_flash_mode(fl)) { case CTRL_USERMODE: for (i = 0; i < size; i++) { ssi_transfer(s->spi, (data >> (8 * i)) & 0xff); } break; case CTRL_WRITEMODE: aspeed_smc_flash_select(fl); aspeed_smc_flash_send_addr(fl, addr); for (i = 0; i < size; i++) { ssi_transfer(s->spi, (data >> (8 * i)) & 0xff); } aspeed_smc_flash_unselect(fl); break; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid flash mode %d\n", __func__, aspeed_smc_flash_mode(fl)); } } static const MemoryRegionOps aspeed_smc_flash_ops = { .read = aspeed_smc_flash_read, .write = aspeed_smc_flash_write, .endianness = DEVICE_LITTLE_ENDIAN, .valid = { .min_access_size = 1, .max_access_size = 4, }, }; static void aspeed_smc_flash_update_cs(AspeedSMCFlash *fl) { const AspeedSMCState *s = fl->controller; qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl)); } static void aspeed_smc_reset(DeviceState *d) { AspeedSMCState *s = ASPEED_SMC(d); int i; memset(s->regs, 0, sizeof s->regs); /* Pretend DMA is done (u-boot initialization) */ s->regs[R_INTR_CTRL] = INTR_CTRL_DMA_STATUS; /* Unselect all slaves */ for (i = 0; i < s->num_cs; ++i) { s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE; qemu_set_irq(s->cs_lines[i], true); } /* setup default segment register values for all */ for (i = 0; i < s->ctrl->max_slaves; ++i) { s->regs[R_SEG_ADDR0 + i] = aspeed_smc_segment_to_reg(&s->ctrl->segments[i]); } /* HW strapping for AST2500 FMC controllers */ if (s->ctrl->segments == aspeed_segments_ast2500_fmc) { /* flash type is fixed to SPI for CE0 and CE1 */ s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0); s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1); /* 4BYTE mode is autodetected for CE0. Let's force it to 1 for * now */ s->regs[s->r_ce_ctrl] |= (1 << (CTRL_EXTENDED0)); } /* HW strapping for AST2400 FMC controllers (SCU70). Let's use the * configuration of the palmetto-bmc machine */ if (s->ctrl->segments == aspeed_segments_fmc) { s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0); s->regs[s->r_ce_ctrl] |= (1 << (CTRL_EXTENDED0)); } } static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) { AspeedSMCState *s = ASPEED_SMC(opaque); addr >>= 2; if (addr == s->r_conf || addr == s->r_timings || addr == s->r_ce_ctrl || addr == R_INTR_CTRL || (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) || (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs)) { return s->regs[addr]; } else { qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", __func__, addr); return 0; } } static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, unsigned int size) { AspeedSMCState *s = ASPEED_SMC(opaque); uint32_t value = data; addr >>= 2; if (addr == s->r_conf || addr == s->r_timings || addr == s->r_ce_ctrl) { s->regs[addr] = value; } else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs) { int cs = addr - s->r_ctrl0; s->regs[addr] = value; aspeed_smc_flash_update_cs(&s->flashes[cs]); } else if (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) { int cs = addr - R_SEG_ADDR0; if (value != s->regs[R_SEG_ADDR0 + cs]) { aspeed_smc_flash_set_segment(s, cs, value); } } else { qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", __func__, addr); return; } } static const MemoryRegionOps aspeed_smc_ops = { .read = aspeed_smc_read, .write = aspeed_smc_write, .endianness = DEVICE_LITTLE_ENDIAN, .valid.unaligned = true, }; static void aspeed_smc_realize(DeviceState *dev, Error **errp) { SysBusDevice *sbd = SYS_BUS_DEVICE(dev); AspeedSMCState *s = ASPEED_SMC(dev); AspeedSMCClass *mc = ASPEED_SMC_GET_CLASS(s); int i; char name[32]; hwaddr offset = 0; s->ctrl = mc->ctrl; /* keep a copy under AspeedSMCState to speed up accesses */ s->r_conf = s->ctrl->r_conf; s->r_ce_ctrl = s->ctrl->r_ce_ctrl; s->r_ctrl0 = s->ctrl->r_ctrl0; s->r_timings = s->ctrl->r_timings; s->conf_enable_w0 = s->ctrl->conf_enable_w0; /* Enforce some real HW limits */ if (s->num_cs > s->ctrl->max_slaves) { qemu_log_mask(LOG_GUEST_ERROR, "%s: num_cs cannot exceed: %d\n", __func__, s->ctrl->max_slaves); s->num_cs = s->ctrl->max_slaves; } s->spi = ssi_create_bus(dev, "spi"); /* Setup cs_lines for slaves */ sysbus_init_irq(sbd, &s->irq); s->cs_lines = g_new0(qemu_irq, s->num_cs); ssi_auto_connect_slaves(dev, s->cs_lines, s->spi); for (i = 0; i < s->num_cs; ++i) { sysbus_init_irq(sbd, &s->cs_lines[i]); } /* The memory region for the controller registers */ memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_ops, s, s->ctrl->name, s->ctrl->nregs * 4); sysbus_init_mmio(sbd, &s->mmio); /* * The container memory region representing the address space * window in which the flash modules are mapped. The size and * address depends on the SoC model and controller type. */ snprintf(name, sizeof(name), "%s.flash", s->ctrl->name); memory_region_init_io(&s->mmio_flash, OBJECT(s), &aspeed_smc_flash_default_ops, s, name, s->ctrl->flash_window_size); sysbus_init_mmio(sbd, &s->mmio_flash); s->flashes = g_new0(AspeedSMCFlash, s->ctrl->max_slaves); /* * Let's create a sub memory region for each possible slave. All * have a configurable memory segment in the overall flash mapping * window of the controller but, there is not necessarily a flash * module behind to handle the memory accesses. This depends on * the board configuration. */ for (i = 0; i < s->ctrl->max_slaves; ++i) { AspeedSMCFlash *fl = &s->flashes[i]; snprintf(name, sizeof(name), "%s.%d", s->ctrl->name, i); fl->id = i; fl->controller = s; fl->size = s->ctrl->segments[i].size; memory_region_init_io(&fl->mmio, OBJECT(s), &aspeed_smc_flash_ops, fl, name, fl->size); memory_region_add_subregion(&s->mmio_flash, offset, &fl->mmio); offset += fl->size; } } static const VMStateDescription vmstate_aspeed_smc = { .name = "aspeed.smc", .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, AspeedSMCState, ASPEED_SMC_R_MAX), VMSTATE_END_OF_LIST() } }; static Property aspeed_smc_properties[] = { DEFINE_PROP_UINT32("num-cs", AspeedSMCState, num_cs, 1), DEFINE_PROP_END_OF_LIST(), }; static void aspeed_smc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); AspeedSMCClass *mc = ASPEED_SMC_CLASS(klass); dc->realize = aspeed_smc_realize; dc->reset = aspeed_smc_reset; dc->props = aspeed_smc_properties; dc->vmsd = &vmstate_aspeed_smc; mc->ctrl = data; } static const TypeInfo aspeed_smc_info = { .name = TYPE_ASPEED_SMC, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AspeedSMCState), .class_size = sizeof(AspeedSMCClass), .abstract = true, }; static void aspeed_smc_register_types(void) { int i; type_register_static(&aspeed_smc_info); for (i = 0; i < ARRAY_SIZE(controllers); ++i) { TypeInfo ti = { .name = controllers[i].name, .parent = TYPE_ASPEED_SMC, .class_init = aspeed_smc_class_init, .class_data = (void *)&controllers[i], }; type_register(&ti); } } type_init(aspeed_smc_register_types)