/* * QEMU aCube Sam460ex board emulation * * Copyright (c) 2012 François Revol * Copyright (c) 2016-2019 BALATON Zoltan * * This file is derived from hw/ppc440_bamboo.c, * the copyright for that material belongs to the original owners. * * This work is licensed under the GNU GPL license version 2 or later. * */ #include "qemu/osdep.h" #include "qemu/units.h" #include "qemu-common.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "hw/boards.h" #include "sysemu/kvm.h" #include "kvm_ppc.h" #include "sysemu/device_tree.h" #include "sysemu/block-backend.h" #include "hw/loader.h" #include "elf.h" #include "exec/address-spaces.h" #include "exec/memory.h" #include "ppc440.h" #include "ppc405.h" #include "hw/block/flash.h" #include "sysemu/sysemu.h" #include "sysemu/qtest.h" #include "sysemu/reset.h" #include "hw/sysbus.h" #include "hw/char/serial.h" #include "hw/i2c/ppc4xx_i2c.h" #include "hw/i2c/smbus_eeprom.h" #include "hw/usb/hcd-ehci.h" #include "hw/ppc/fdt.h" #include "hw/qdev-properties.h" #include #define BINARY_DEVICE_TREE_FILE "canyonlands.dtb" #define UBOOT_FILENAME "u-boot-sam460-20100605.bin" /* to extract the official U-Boot bin from the updater: */ /* dd bs=1 skip=$(($(stat -c '%s' updater/updater-460) - 0x80000)) \ if=updater/updater-460 of=u-boot-sam460-20100605.bin */ /* from Sam460 U-Boot include/configs/Sam460ex.h */ #define FLASH_BASE 0xfff00000 #define FLASH_BASE_H 0x4 #define FLASH_SIZE (1 * MiB) #define UBOOT_LOAD_BASE 0xfff80000 #define UBOOT_SIZE 0x00080000 #define UBOOT_ENTRY 0xfffffffc /* from U-Boot */ #define EPAPR_MAGIC (0x45504150) #define KERNEL_ADDR 0x1000000 #define FDT_ADDR 0x1800000 #define RAMDISK_ADDR 0x1900000 /* Sam460ex IRQ MAP: IRQ0 = ETH_INT IRQ1 = FPGA_INT IRQ2 = PCI_INT (PCIA, PCIB, PCIC, PCIB) IRQ3 = FPGA_INT2 IRQ11 = RTC_INT IRQ12 = SM502_INT */ #define CPU_FREQ 1150000000 #define PLB_FREQ 230000000 #define OPB_FREQ 115000000 #define EBC_FREQ 115000000 #define UART_FREQ 11059200 #define SDRAM_NR_BANKS 4 /* The SoC could also handle 4 GiB but firmware does not work with that. */ /* Maybe it overflows a signed 32 bit number somewhere? */ static const ram_addr_t ppc460ex_sdram_bank_sizes[] = { 2 * GiB, 1 * GiB, 512 * MiB, 256 * MiB, 128 * MiB, 64 * MiB, 32 * MiB, 0 }; struct boot_info { uint32_t dt_base; uint32_t dt_size; uint32_t entry; }; static int sam460ex_load_uboot(void) { /* * This first creates 1MiB of flash memory mapped at the end of * the 32-bit address space (0xFFF00000..0xFFFFFFFF). * * If_PFLASH unit 0 is defined, the flash memory is initialized * from that block backend. * * Else, it's initialized to zero. And then 512KiB of ROM get * mapped on top of its second half (0xFFF80000..0xFFFFFFFF), * initialized from u-boot-sam460-20100605.bin. * * This doesn't smell right. * * The physical hardware appears to have 512KiB flash memory. * * TODO Figure out what we really need here, and clean this up. */ DriveInfo *dinfo; dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(FLASH_BASE | ((hwaddr)FLASH_BASE_H << 32), "sam460ex.flash", FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, 64 * KiB, 1, 0x89, 0x18, 0x0000, 0x0, 1)) { error_report("Error registering flash memory"); /* XXX: return an error instead? */ exit(1); } if (!dinfo) { /*error_report("No flash image given with the 'pflash' parameter," " using default u-boot image");*/ rom_add_file_fixed(UBOOT_FILENAME, UBOOT_LOAD_BASE | ((hwaddr)FLASH_BASE_H << 32), -1); } return 0; } static int sam460ex_load_device_tree(hwaddr addr, uint32_t ramsize, hwaddr initrd_base, hwaddr initrd_size, const char *kernel_cmdline) { uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) }; char *filename; int fdt_size; void *fdt; uint32_t tb_freq = CPU_FREQ; uint32_t clock_freq = CPU_FREQ; int offset; filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE); if (!filename) { error_report("Couldn't find dtb file `%s'", BINARY_DEVICE_TREE_FILE); exit(1); } fdt = load_device_tree(filename, &fdt_size); if (!fdt) { error_report("Couldn't load dtb file `%s'", filename); g_free(filename); exit(1); } g_free(filename); /* Manipulate device tree in memory. */ qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property, sizeof(mem_reg_property)); /* default FDT doesn't have a /chosen node... */ qemu_fdt_add_subnode(fdt, "/chosen"); qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", initrd_base); qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", (initrd_base + initrd_size)); qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", kernel_cmdline); /* Copy data from the host device tree into the guest. Since the guest can * directly access the timebase without host involvement, we must expose * the correct frequencies. */ if (kvm_enabled()) { tb_freq = kvmppc_get_tbfreq(); clock_freq = kvmppc_get_clockfreq(); } qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency", clock_freq); qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency", tb_freq); /* Remove cpm node if it exists (it is not emulated) */ offset = fdt_path_offset(fdt, "/cpm"); if (offset >= 0) { _FDT(fdt_nop_node(fdt, offset)); } /* set serial port clocks */ offset = fdt_node_offset_by_compatible(fdt, -1, "ns16550"); while (offset >= 0) { _FDT(fdt_setprop_cell(fdt, offset, "clock-frequency", UART_FREQ)); offset = fdt_node_offset_by_compatible(fdt, offset, "ns16550"); } /* some more clocks */ qemu_fdt_setprop_cell(fdt, "/plb", "clock-frequency", PLB_FREQ); qemu_fdt_setprop_cell(fdt, "/plb/opb", "clock-frequency", OPB_FREQ); qemu_fdt_setprop_cell(fdt, "/plb/opb/ebc", "clock-frequency", EBC_FREQ); rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr); g_free(fdt); return fdt_size; } /* Create reset TLB entries for BookE, mapping only the flash memory. */ static void mmubooke_create_initial_mapping_uboot(CPUPPCState *env) { ppcemb_tlb_t *tlb = &env->tlb.tlbe[0]; /* on reset the flash is mapped by a shadow TLB, * but since we don't implement them we need to use * the same values U-Boot will use to avoid a fault. */ tlb->attr = 0; tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); tlb->size = 0x10000000; /* up to 0xffffffff */ tlb->EPN = 0xf0000000 & TARGET_PAGE_MASK; tlb->RPN = (0xf0000000 & TARGET_PAGE_MASK) | 0x4; tlb->PID = 0; } /* Create reset TLB entries for BookE, spanning the 32bit addr space. */ static void mmubooke_create_initial_mapping(CPUPPCState *env, target_ulong va, hwaddr pa) { ppcemb_tlb_t *tlb = &env->tlb.tlbe[0]; tlb->attr = 0; tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); tlb->size = 1 << 31; /* up to 0x80000000 */ tlb->EPN = va & TARGET_PAGE_MASK; tlb->RPN = pa & TARGET_PAGE_MASK; tlb->PID = 0; } static void main_cpu_reset(void *opaque) { PowerPCCPU *cpu = opaque; CPUPPCState *env = &cpu->env; struct boot_info *bi = env->load_info; cpu_reset(CPU(cpu)); /* either we have a kernel to boot or we jump to U-Boot */ if (bi->entry != UBOOT_ENTRY) { env->gpr[1] = (16 * MiB) - 8; env->gpr[3] = FDT_ADDR; env->nip = bi->entry; /* Create a mapping for the kernel. */ mmubooke_create_initial_mapping(env, 0, 0); env->gpr[6] = tswap32(EPAPR_MAGIC); env->gpr[7] = (16 * MiB) - 8; /* bi->ima_size; */ } else { env->nip = UBOOT_ENTRY; mmubooke_create_initial_mapping_uboot(env); } } static void sam460ex_init(MachineState *machine) { MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *isa = g_new(MemoryRegion, 1); MemoryRegion *ram_memories = g_new(MemoryRegion, SDRAM_NR_BANKS); hwaddr ram_bases[SDRAM_NR_BANKS] = {0}; hwaddr ram_sizes[SDRAM_NR_BANKS] = {0}; MemoryRegion *l2cache_ram = g_new(MemoryRegion, 1); qemu_irq *irqs, *uic[4]; PCIBus *pci_bus; PowerPCCPU *cpu; CPUPPCState *env; I2CBus *i2c; hwaddr entry = UBOOT_ENTRY; hwaddr loadaddr = LOAD_UIMAGE_LOADADDR_INVALID; target_long initrd_size = 0; DeviceState *dev; SysBusDevice *sbdev; struct boot_info *boot_info; uint8_t *spd_data; Error *err = NULL; int success; cpu = POWERPC_CPU(cpu_create(machine->cpu_type)); env = &cpu->env; if (env->mmu_model != POWERPC_MMU_BOOKE) { error_report("Only MMU model BookE is supported by this machine."); exit(1); } qemu_register_reset(main_cpu_reset, cpu); boot_info = g_malloc0(sizeof(*boot_info)); env->load_info = boot_info; ppc_booke_timers_init(cpu, CPU_FREQ, 0); ppc_dcr_init(env, NULL, NULL); /* PLB arbitrer */ ppc4xx_plb_init(env); /* interrupt controllers */ irqs = g_new0(qemu_irq, PPCUIC_OUTPUT_NB); irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT]; irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT]; uic[0] = ppcuic_init(env, irqs, 0xc0, 0, 1); uic[1] = ppcuic_init(env, &uic[0][30], 0xd0, 0, 1); uic[2] = ppcuic_init(env, &uic[0][10], 0xe0, 0, 1); uic[3] = ppcuic_init(env, &uic[0][16], 0xf0, 0, 1); /* SDRAM controller */ /* put all RAM on first bank because board has one slot * and firmware only checks that */ machine->ram_size = ppc4xx_sdram_adjust(machine->ram_size, 1, ram_memories, ram_bases, ram_sizes, ppc460ex_sdram_bank_sizes); /* FIXME: does 460EX have ECC interrupts? */ ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories, ram_bases, ram_sizes, 1); /* IIC controllers and devices */ dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700, uic[0][2]); i2c = PPC4xx_I2C(dev)->bus; /* SPD EEPROM on RAM module */ spd_data = spd_data_generate(DDR2, ram_sizes[0], &err); if (err) { warn_report_err(err); } if (spd_data) { spd_data[20] = 4; /* SO-DIMM module */ smbus_eeprom_init_one(i2c, 0x50, spd_data); } /* RTC */ i2c_create_slave(i2c, "m41t80", 0x68); dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600800, uic[0][3]); /* External bus controller */ ppc405_ebc_init(env); /* CPR */ ppc4xx_cpr_init(env); /* PLB to AHB bridge */ ppc4xx_ahb_init(env); /* System DCRs */ ppc4xx_sdr_init(env); /* MAL */ ppc4xx_mal_init(env, 4, 16, &uic[2][3]); /* DMA */ ppc4xx_dma_init(env, 0x200); /* 256K of L2 cache as memory */ ppc4xx_l2sram_init(env); /* FIXME: remove this after fixing l2sram mapping in ppc440_uc.c? */ memory_region_init_ram(l2cache_ram, NULL, "ppc440.l2cache_ram", 256 * KiB, &error_abort); memory_region_add_subregion(address_space_mem, 0x400000000LL, l2cache_ram); /* USB */ sysbus_create_simple(TYPE_PPC4xx_EHCI, 0x4bffd0400, uic[2][29]); dev = qdev_create(NULL, "sysbus-ohci"); qdev_prop_set_string(dev, "masterbus", "usb-bus.0"); qdev_prop_set_uint32(dev, "num-ports", 6); qdev_init_nofail(dev); sbdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(sbdev, 0, 0x4bffd0000); sysbus_connect_irq(sbdev, 0, uic[2][30]); usb_create_simple(usb_bus_find(-1), "usb-kbd"); usb_create_simple(usb_bus_find(-1), "usb-mouse"); /* PCI bus */ ppc460ex_pcie_init(env); /* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */ dev = sysbus_create_simple("ppc440-pcix-host", 0xc0ec00000, uic[1][0]); pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0"); if (!pci_bus) { error_report("couldn't create PCI controller!"); exit(1); } memory_region_init_alias(isa, NULL, "isa_mmio", get_system_io(), 0, 0x10000); memory_region_add_subregion(get_system_memory(), 0xc08000000, isa); /* PCI devices */ pci_create_simple(pci_bus, PCI_DEVFN(6, 0), "sm501"); /* SoC has a single SATA port but we don't emulate that yet * However, firmware and usual clients have driver for SiI311x * so add one for convenience by default */ if (defaults_enabled()) { pci_create_simple(pci_bus, -1, "sii3112"); } /* SoC has 4 UARTs * but board has only one wired and two are present in fdt */ if (serial_hd(0) != NULL) { serial_mm_init(address_space_mem, 0x4ef600300, 0, uic[1][1], PPC_SERIAL_MM_BAUDBASE, serial_hd(0), DEVICE_BIG_ENDIAN); } if (serial_hd(1) != NULL) { serial_mm_init(address_space_mem, 0x4ef600400, 0, uic[0][1], PPC_SERIAL_MM_BAUDBASE, serial_hd(1), DEVICE_BIG_ENDIAN); } /* Load U-Boot image. */ if (!machine->kernel_filename) { success = sam460ex_load_uboot(); if (success < 0) { error_report("could not load firmware"); exit(1); } } /* Load kernel. */ if (machine->kernel_filename) { success = load_uimage(machine->kernel_filename, &entry, &loadaddr, NULL, NULL, NULL); if (success < 0) { uint64_t elf_entry, elf_lowaddr; success = load_elf(machine->kernel_filename, NULL, NULL, NULL, &elf_entry, &elf_lowaddr, NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0); entry = elf_entry; loadaddr = elf_lowaddr; } /* XXX try again as binary */ if (success < 0) { error_report("could not load kernel '%s'", machine->kernel_filename); exit(1); } } /* Load initrd. */ if (machine->initrd_filename) { initrd_size = load_image_targphys(machine->initrd_filename, RAMDISK_ADDR, machine->ram_size - RAMDISK_ADDR); if (initrd_size < 0) { error_report("could not load ram disk '%s' at %x", machine->initrd_filename, RAMDISK_ADDR); exit(1); } } /* If we're loading a kernel directly, we must load the device tree too. */ if (machine->kernel_filename) { int dt_size; dt_size = sam460ex_load_device_tree(FDT_ADDR, machine->ram_size, RAMDISK_ADDR, initrd_size, machine->kernel_cmdline); boot_info->dt_base = FDT_ADDR; boot_info->dt_size = dt_size; } boot_info->entry = entry; } static void sam460ex_machine_init(MachineClass *mc) { mc->desc = "aCube Sam460ex"; mc->init = sam460ex_init; mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("460exb"); mc->default_ram_size = 512 * MiB; } DEFINE_MACHINE("sam460ex", sam460ex_machine_init)