/* * QEMU PowerPC 440 Bamboo board emulation * * Copyright 2007 IBM Corporation. * Authors: * Jerone Young * Christian Ehrhardt * Hollis Blanchard * * This work is licensed under the GNU GPL license version 2 or later. * */ #include "qemu/osdep.h" #include "qemu/units.h" #include "qemu/error-report.h" #include "qemu-common.h" #include "qemu/error-report.h" #include "net/net.h" #include "hw/hw.h" #include "hw/pci/pci.h" #include "hw/boards.h" #include "sysemu/kvm.h" #include "kvm_ppc.h" #include "sysemu/device_tree.h" #include "hw/loader.h" #include "elf.h" #include "exec/address-spaces.h" #include "hw/char/serial.h" #include "hw/ppc/ppc.h" #include "ppc405.h" #include "sysemu/sysemu.h" #include "sysemu/qtest.h" #include "sysemu/reset.h" #include "hw/sysbus.h" #define BINARY_DEVICE_TREE_FILE "bamboo.dtb" /* from u-boot */ #define KERNEL_ADDR 0x1000000 #define FDT_ADDR 0x1800000 #define RAMDISK_ADDR 0x1900000 #define PPC440EP_PCI_CONFIG 0xeec00000 #define PPC440EP_PCI_INTACK 0xeed00000 #define PPC440EP_PCI_SPECIAL 0xeed00000 #define PPC440EP_PCI_REGS 0xef400000 #define PPC440EP_PCI_IO 0xe8000000 #define PPC440EP_PCI_IOLEN 0x00010000 #define PPC440EP_SDRAM_NR_BANKS 4 static const ram_addr_t ppc440ep_sdram_bank_sizes[] = { 256 * MiB, 128 * MiB, 64 * MiB, 32 * MiB, 16 * MiB, 8 * MiB, 0 }; static hwaddr entry; static int bamboo_load_device_tree(hwaddr addr, uint32_t ramsize, hwaddr initrd_base, hwaddr initrd_size, const char *kernel_cmdline) { int ret = -1; uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) }; char *filename; int fdt_size; void *fdt; uint32_t tb_freq = 400000000; uint32_t clock_freq = 400000000; filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE); if (!filename) { goto out; } fdt = load_device_tree(filename, &fdt_size); g_free(filename); if (fdt == NULL) { goto out; } /* Manipulate device tree in memory. */ ret = qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property, sizeof(mem_reg_property)); if (ret < 0) fprintf(stderr, "couldn't set /memory/reg\n"); ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", initrd_base); if (ret < 0) fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", (initrd_base + initrd_size)); if (ret < 0) fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", kernel_cmdline); if (ret < 0) fprintf(stderr, "couldn't set /chosen/bootargs\n"); /* Copy data from the host device tree into the guest. Since the guest can * directly access the timebase without host involvement, we must expose * the correct frequencies. */ if (kvm_enabled()) { tb_freq = kvmppc_get_tbfreq(); clock_freq = kvmppc_get_clockfreq(); } qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency", clock_freq); qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency", tb_freq); rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr); g_free(fdt); return 0; out: return ret; } /* Create reset TLB entries for BookE, spanning the 32bit addr space. */ static void mmubooke_create_initial_mapping(CPUPPCState *env, target_ulong va, hwaddr pa) { ppcemb_tlb_t *tlb = &env->tlb.tlbe[0]; tlb->attr = 0; tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); tlb->size = 1U << 31; /* up to 0x80000000 */ tlb->EPN = va & TARGET_PAGE_MASK; tlb->RPN = pa & TARGET_PAGE_MASK; tlb->PID = 0; tlb = &env->tlb.tlbe[1]; tlb->attr = 0; tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); tlb->size = 1U << 31; /* up to 0xffffffff */ tlb->EPN = 0x80000000 & TARGET_PAGE_MASK; tlb->RPN = 0x80000000 & TARGET_PAGE_MASK; tlb->PID = 0; } static void main_cpu_reset(void *opaque) { PowerPCCPU *cpu = opaque; CPUPPCState *env = &cpu->env; cpu_reset(CPU(cpu)); env->gpr[1] = (16 * MiB) - 8; env->gpr[3] = FDT_ADDR; env->nip = entry; /* Create a mapping for the kernel. */ mmubooke_create_initial_mapping(env, 0, 0); } static void bamboo_init(MachineState *machine) { ram_addr_t ram_size = machine->ram_size; const char *kernel_filename = machine->kernel_filename; const char *kernel_cmdline = machine->kernel_cmdline; const char *initrd_filename = machine->initrd_filename; unsigned int pci_irq_nrs[4] = { 28, 27, 26, 25 }; MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *isa = g_new(MemoryRegion, 1); MemoryRegion *ram_memories = g_new(MemoryRegion, PPC440EP_SDRAM_NR_BANKS); hwaddr ram_bases[PPC440EP_SDRAM_NR_BANKS]; hwaddr ram_sizes[PPC440EP_SDRAM_NR_BANKS]; qemu_irq *pic; qemu_irq *irqs; PCIBus *pcibus; PowerPCCPU *cpu; CPUPPCState *env; uint64_t elf_entry; uint64_t elf_lowaddr; hwaddr loadaddr = LOAD_UIMAGE_LOADADDR_INVALID; target_long initrd_size = 0; DeviceState *dev; int success; int i; cpu = POWERPC_CPU(cpu_create(machine->cpu_type)); env = &cpu->env; if (env->mmu_model != POWERPC_MMU_BOOKE) { error_report("MMU model %i not supported by this machine", env->mmu_model); exit(1); } qemu_register_reset(main_cpu_reset, cpu); ppc_booke_timers_init(cpu, 400000000, 0); ppc_dcr_init(env, NULL, NULL); /* interrupt controller */ irqs = g_new0(qemu_irq, PPCUIC_OUTPUT_NB); irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT]; irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT]; pic = ppcuic_init(env, irqs, 0x0C0, 0, 1); /* SDRAM controller */ memset(ram_bases, 0, sizeof(ram_bases)); memset(ram_sizes, 0, sizeof(ram_sizes)); ram_size = ppc4xx_sdram_adjust(ram_size, PPC440EP_SDRAM_NR_BANKS, ram_memories, ram_bases, ram_sizes, ppc440ep_sdram_bank_sizes); /* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */ ppc4xx_sdram_init(env, pic[14], PPC440EP_SDRAM_NR_BANKS, ram_memories, ram_bases, ram_sizes, 1); /* PCI */ dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST_BRIDGE, PPC440EP_PCI_CONFIG, pic[pci_irq_nrs[0]], pic[pci_irq_nrs[1]], pic[pci_irq_nrs[2]], pic[pci_irq_nrs[3]], NULL); pcibus = (PCIBus *)qdev_get_child_bus(dev, "pci.0"); if (!pcibus) { error_report("couldn't create PCI controller"); exit(1); } memory_region_init_alias(isa, NULL, "isa_mmio", get_system_io(), 0, PPC440EP_PCI_IOLEN); memory_region_add_subregion(get_system_memory(), PPC440EP_PCI_IO, isa); if (serial_hd(0) != NULL) { serial_mm_init(address_space_mem, 0xef600300, 0, pic[0], PPC_SERIAL_MM_BAUDBASE, serial_hd(0), DEVICE_BIG_ENDIAN); } if (serial_hd(1) != NULL) { serial_mm_init(address_space_mem, 0xef600400, 0, pic[1], PPC_SERIAL_MM_BAUDBASE, serial_hd(1), DEVICE_BIG_ENDIAN); } if (pcibus) { /* Register network interfaces. */ for (i = 0; i < nb_nics; i++) { /* There are no PCI NICs on the Bamboo board, but there are * PCI slots, so we can pick whatever default model we want. */ pci_nic_init_nofail(&nd_table[i], pcibus, "e1000", NULL); } } /* Load kernel. */ if (kernel_filename) { success = load_uimage(kernel_filename, &entry, &loadaddr, NULL, NULL, NULL); if (success < 0) { success = load_elf(kernel_filename, NULL, NULL, NULL, &elf_entry, &elf_lowaddr, NULL, 1, PPC_ELF_MACHINE, 0, 0); entry = elf_entry; loadaddr = elf_lowaddr; } /* XXX try again as binary */ if (success < 0) { error_report("could not load kernel '%s'", kernel_filename); exit(1); } } /* Load initrd. */ if (initrd_filename) { initrd_size = load_image_targphys(initrd_filename, RAMDISK_ADDR, ram_size - RAMDISK_ADDR); if (initrd_size < 0) { error_report("could not load ram disk '%s' at %x", initrd_filename, RAMDISK_ADDR); exit(1); } } /* If we're loading a kernel directly, we must load the device tree too. */ if (kernel_filename) { if (bamboo_load_device_tree(FDT_ADDR, ram_size, RAMDISK_ADDR, initrd_size, kernel_cmdline) < 0) { error_report("couldn't load device tree"); exit(1); } } } static void bamboo_machine_init(MachineClass *mc) { mc->desc = "bamboo"; mc->init = bamboo_init; mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("440epb"); } DEFINE_MACHINE("bamboo", bamboo_machine_init)