/* * QEMU ATAPI Emulation * * Copyright (c) 2003 Fabrice Bellard * Copyright (c) 2006 Openedhand Ltd. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include "qemu/osdep.h" #include "hw/ide/internal.h" #include "hw/scsi/scsi.h" #include "sysemu/block-backend.h" #include "trace.h" #define ATAPI_SECTOR_BITS (2 + BDRV_SECTOR_BITS) #define ATAPI_SECTOR_SIZE (1 << ATAPI_SECTOR_BITS) static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret); static void padstr8(uint8_t *buf, int buf_size, const char *src) { int i; for(i = 0; i < buf_size; i++) { if (*src) buf[i] = *src++; else buf[i] = ' '; } } static void lba_to_msf(uint8_t *buf, int lba) { lba += 150; buf[0] = (lba / 75) / 60; buf[1] = (lba / 75) % 60; buf[2] = lba % 75; } static inline int media_present(IDEState *s) { return !s->tray_open && s->nb_sectors > 0; } /* XXX: DVDs that could fit on a CD will be reported as a CD */ static inline int media_is_dvd(IDEState *s) { return (media_present(s) && s->nb_sectors > CD_MAX_SECTORS); } static inline int media_is_cd(IDEState *s) { return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS); } static void cd_data_to_raw(uint8_t *buf, int lba) { /* sync bytes */ buf[0] = 0x00; memset(buf + 1, 0xff, 10); buf[11] = 0x00; buf += 12; /* MSF */ lba_to_msf(buf, lba); buf[3] = 0x01; /* mode 1 data */ buf += 4; /* data */ buf += 2048; /* XXX: ECC not computed */ memset(buf, 0, 288); } static int cd_read_sector_sync(IDEState *s) { int ret; block_acct_start(blk_get_stats(s->blk), &s->acct, ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ); trace_cd_read_sector_sync(s->lba); switch (s->cd_sector_size) { case 2048: ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS, s->io_buffer, ATAPI_SECTOR_SIZE); break; case 2352: ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS, s->io_buffer + 16, ATAPI_SECTOR_SIZE); if (ret >= 0) { cd_data_to_raw(s->io_buffer, s->lba); } break; default: block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ); return -EIO; } if (ret < 0) { block_acct_failed(blk_get_stats(s->blk), &s->acct); } else { block_acct_done(blk_get_stats(s->blk), &s->acct); s->lba++; s->io_buffer_index = 0; } return ret; } static void cd_read_sector_cb(void *opaque, int ret) { IDEState *s = opaque; trace_cd_read_sector_cb(s->lba, ret); if (ret < 0) { block_acct_failed(blk_get_stats(s->blk), &s->acct); ide_atapi_io_error(s, ret); return; } block_acct_done(blk_get_stats(s->blk), &s->acct); if (s->cd_sector_size == 2352) { cd_data_to_raw(s->io_buffer, s->lba); } s->lba++; s->io_buffer_index = 0; s->status &= ~BUSY_STAT; ide_atapi_cmd_reply_end(s); } static int cd_read_sector(IDEState *s) { void *buf; if (s->cd_sector_size != 2048 && s->cd_sector_size != 2352) { block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ); return -EINVAL; } buf = (s->cd_sector_size == 2352) ? s->io_buffer + 16 : s->io_buffer; qemu_iovec_init_buf(&s->qiov, buf, ATAPI_SECTOR_SIZE); trace_cd_read_sector(s->lba); block_acct_start(blk_get_stats(s->blk), &s->acct, ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ); ide_buffered_readv(s, (int64_t)s->lba << 2, &s->qiov, 4, cd_read_sector_cb, s); s->status |= BUSY_STAT; return 0; } void ide_atapi_cmd_ok(IDEState *s) { s->error = 0; s->status = READY_STAT | SEEK_STAT; s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; ide_transfer_stop(s); ide_set_irq(s->bus); } void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc) { trace_ide_atapi_cmd_error(s, sense_key, asc); s->error = sense_key << 4; s->status = READY_STAT | ERR_STAT; s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; s->sense_key = sense_key; s->asc = asc; ide_transfer_stop(s); ide_set_irq(s->bus); } void ide_atapi_io_error(IDEState *s, int ret) { /* XXX: handle more errors */ if (ret == -ENOMEDIUM) { ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT); } else { ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR); } } static uint16_t atapi_byte_count_limit(IDEState *s) { uint16_t bcl; bcl = s->lcyl | (s->hcyl << 8); if (bcl == 0xffff) { return 0xfffe; } return bcl; } /* The whole ATAPI transfer logic is handled in this function */ void ide_atapi_cmd_reply_end(IDEState *s) { int byte_count_limit, size, ret; while (s->packet_transfer_size > 0) { trace_ide_atapi_cmd_reply_end(s, s->packet_transfer_size, s->elementary_transfer_size, s->io_buffer_index); /* see if a new sector must be read */ if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) { if (!s->elementary_transfer_size) { ret = cd_read_sector(s); if (ret < 0) { ide_atapi_io_error(s, ret); } return; } else { /* rebuffering within an elementary transfer is * only possible with a sync request because we * end up with a race condition otherwise */ ret = cd_read_sector_sync(s); if (ret < 0) { ide_atapi_io_error(s, ret); return; } } } if (s->elementary_transfer_size > 0) { /* there are some data left to transmit in this elementary transfer */ size = s->cd_sector_size - s->io_buffer_index; if (size > s->elementary_transfer_size) size = s->elementary_transfer_size; } else { /* a new transfer is needed */ s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO; ide_set_irq(s->bus); byte_count_limit = atapi_byte_count_limit(s); trace_ide_atapi_cmd_reply_end_bcl(s, byte_count_limit); size = s->packet_transfer_size; if (size > byte_count_limit) { /* byte count limit must be even if this case */ if (byte_count_limit & 1) byte_count_limit--; size = byte_count_limit; } s->lcyl = size; s->hcyl = size >> 8; s->elementary_transfer_size = size; /* we cannot transmit more than one sector at a time */ if (s->lba != -1) { if (size > (s->cd_sector_size - s->io_buffer_index)) size = (s->cd_sector_size - s->io_buffer_index); } trace_ide_atapi_cmd_reply_end_new(s, s->status); } s->packet_transfer_size -= size; s->elementary_transfer_size -= size; s->io_buffer_index += size; assert(size <= s->io_buffer_total_len); assert(s->io_buffer_index <= s->io_buffer_total_len); /* Some adapters process PIO data right away. In that case, we need * to avoid mutual recursion between ide_transfer_start * and ide_atapi_cmd_reply_end. */ if (!ide_transfer_start_norecurse(s, s->io_buffer + s->io_buffer_index - size, size, ide_atapi_cmd_reply_end)) { return; } } /* end of transfer */ trace_ide_atapi_cmd_reply_end_eot(s, s->status); ide_atapi_cmd_ok(s); ide_set_irq(s->bus); } /* send a reply of 'size' bytes in s->io_buffer to an ATAPI command */ static void ide_atapi_cmd_reply(IDEState *s, int size, int max_size) { if (size > max_size) size = max_size; s->lba = -1; /* no sector read */ s->packet_transfer_size = size; s->io_buffer_size = size; /* dma: send the reply data as one chunk */ s->elementary_transfer_size = 0; if (s->atapi_dma) { block_acct_start(blk_get_stats(s->blk), &s->acct, size, BLOCK_ACCT_READ); s->status = READY_STAT | SEEK_STAT | DRQ_STAT; ide_start_dma(s, ide_atapi_cmd_read_dma_cb); } else { s->status = READY_STAT | SEEK_STAT; s->io_buffer_index = 0; ide_atapi_cmd_reply_end(s); } } /* start a CD-ROM read command */ static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors, int sector_size) { assert(0 <= lba && lba < (s->nb_sectors >> 2)); s->lba = lba; s->packet_transfer_size = nb_sectors * sector_size; s->elementary_transfer_size = 0; s->io_buffer_index = sector_size; s->cd_sector_size = sector_size; ide_atapi_cmd_reply_end(s); } static void ide_atapi_cmd_check_status(IDEState *s) { trace_ide_atapi_cmd_check_status(s); s->error = MC_ERR | (UNIT_ATTENTION << 4); s->status = ERR_STAT; s->nsector = 0; ide_set_irq(s->bus); } /* ATAPI DMA support */ static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret) { IDEState *s = opaque; int data_offset, n; if (ret < 0) { if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) { if (s->bus->error_status) { s->bus->dma->aiocb = NULL; return; } goto eot; } } if (s->io_buffer_size > 0) { /* * For a cdrom read sector command (s->lba != -1), * adjust the lba for the next s->io_buffer_size chunk * and dma the current chunk. * For a command != read (s->lba == -1), just transfer * the reply data. */ if (s->lba != -1) { if (s->cd_sector_size == 2352) { n = 1; cd_data_to_raw(s->io_buffer, s->lba); } else { n = s->io_buffer_size >> 11; } s->lba += n; } s->packet_transfer_size -= s->io_buffer_size; if (s->bus->dma->ops->rw_buf(s->bus->dma, 1) == 0) goto eot; } if (s->packet_transfer_size <= 0) { s->status = READY_STAT | SEEK_STAT; s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; ide_set_irq(s->bus); goto eot; } s->io_buffer_index = 0; if (s->cd_sector_size == 2352) { n = 1; s->io_buffer_size = s->cd_sector_size; data_offset = 16; } else { n = s->packet_transfer_size >> 11; if (n > (IDE_DMA_BUF_SECTORS / 4)) n = (IDE_DMA_BUF_SECTORS / 4); s->io_buffer_size = n * 2048; data_offset = 0; } trace_ide_atapi_cmd_read_dma_cb_aio(s, s->lba, n); qemu_iovec_init_buf(&s->bus->dma->qiov, s->io_buffer + data_offset, n * ATAPI_SECTOR_SIZE); s->bus->dma->aiocb = ide_buffered_readv(s, (int64_t)s->lba << 2, &s->bus->dma->qiov, n * 4, ide_atapi_cmd_read_dma_cb, s); return; eot: if (ret < 0) { block_acct_failed(blk_get_stats(s->blk), &s->acct); } else { block_acct_done(blk_get_stats(s->blk), &s->acct); } ide_set_inactive(s, false); } /* start a CD-ROM read command with DMA */ /* XXX: test if DMA is available */ static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors, int sector_size) { assert(0 <= lba && lba < (s->nb_sectors >> 2)); s->lba = lba; s->packet_transfer_size = nb_sectors * sector_size; s->io_buffer_size = 0; s->cd_sector_size = sector_size; block_acct_start(blk_get_stats(s->blk), &s->acct, s->packet_transfer_size, BLOCK_ACCT_READ); /* XXX: check if BUSY_STAT should be set */ s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT; ide_start_dma(s, ide_atapi_cmd_read_dma_cb); } static void ide_atapi_cmd_read(IDEState *s, int lba, int nb_sectors, int sector_size) { trace_ide_atapi_cmd_read(s, s->atapi_dma ? "dma" : "pio", lba, nb_sectors); if (s->atapi_dma) { ide_atapi_cmd_read_dma(s, lba, nb_sectors, sector_size); } else { ide_atapi_cmd_read_pio(s, lba, nb_sectors, sector_size); } } void ide_atapi_dma_restart(IDEState *s) { /* * At this point we can just re-evaluate the packet command and start over. * The presence of ->dma_cb callback in the pre_save ensures that the packet * command has been completely sent and we can safely restart command. */ s->unit = s->bus->retry_unit; s->bus->dma->ops->restart_dma(s->bus->dma); ide_atapi_cmd(s); } static inline uint8_t ide_atapi_set_profile(uint8_t *buf, uint8_t *index, uint16_t profile) { uint8_t *buf_profile = buf + 12; /* start of profiles */ buf_profile += ((*index) * 4); /* start of indexed profile */ stw_be_p(buf_profile, profile); buf_profile[2] = ((buf_profile[0] == buf[6]) && (buf_profile[1] == buf[7])); /* each profile adds 4 bytes to the response */ (*index)++; buf[11] += 4; /* Additional Length */ return 4; } static int ide_dvd_read_structure(IDEState *s, int format, const uint8_t *packet, uint8_t *buf) { switch (format) { case 0x0: /* Physical format information */ { int layer = packet[6]; uint64_t total_sectors; if (layer != 0) return -ASC_INV_FIELD_IN_CMD_PACKET; total_sectors = s->nb_sectors >> 2; if (total_sectors == 0) { return -ASC_MEDIUM_NOT_PRESENT; } buf[4] = 1; /* DVD-ROM, part version 1 */ buf[5] = 0xf; /* 120mm disc, minimum rate unspecified */ buf[6] = 1; /* one layer, read-only (per MMC-2 spec) */ buf[7] = 0; /* default densities */ /* FIXME: 0x30000 per spec? */ stl_be_p(buf + 8, 0); /* start sector */ stl_be_p(buf + 12, total_sectors - 1); /* end sector */ stl_be_p(buf + 16, total_sectors - 1); /* l0 end sector */ /* Size of buffer, not including 2 byte size field */ stw_be_p(buf, 2048 + 2); /* 2k data + 4 byte header */ return (2048 + 4); } case 0x01: /* DVD copyright information */ buf[4] = 0; /* no copyright data */ buf[5] = 0; /* no region restrictions */ /* Size of buffer, not including 2 byte size field */ stw_be_p(buf, 4 + 2); /* 4 byte header + 4 byte data */ return (4 + 4); case 0x03: /* BCA information - invalid field for no BCA info */ return -ASC_INV_FIELD_IN_CMD_PACKET; case 0x04: /* DVD disc manufacturing information */ /* Size of buffer, not including 2 byte size field */ stw_be_p(buf, 2048 + 2); /* 2k data + 4 byte header */ return (2048 + 4); case 0xff: /* * This lists all the command capabilities above. Add new ones * in order and update the length and buffer return values. */ buf[4] = 0x00; /* Physical format */ buf[5] = 0x40; /* Not writable, is readable */ stw_be_p(buf + 6, 2048 + 4); buf[8] = 0x01; /* Copyright info */ buf[9] = 0x40; /* Not writable, is readable */ stw_be_p(buf + 10, 4 + 4); buf[12] = 0x03; /* BCA info */ buf[13] = 0x40; /* Not writable, is readable */ stw_be_p(buf + 14, 188 + 4); buf[16] = 0x04; /* Manufacturing info */ buf[17] = 0x40; /* Not writable, is readable */ stw_be_p(buf + 18, 2048 + 4); /* Size of buffer, not including 2 byte size field */ stw_be_p(buf, 16 + 2); /* data written + 4 byte header */ return (16 + 4); default: /* TODO: formats beyond DVD-ROM requires */ return -ASC_INV_FIELD_IN_CMD_PACKET; } } static unsigned int event_status_media(IDEState *s, uint8_t *buf) { uint8_t event_code, media_status; media_status = 0; if (s->tray_open) { media_status = MS_TRAY_OPEN; } else if (blk_is_inserted(s->blk)) { media_status = MS_MEDIA_PRESENT; } /* Event notification descriptor */ event_code = MEC_NO_CHANGE; if (media_status != MS_TRAY_OPEN) { if (s->events.new_media) { event_code = MEC_NEW_MEDIA; s->events.new_media = false; } else if (s->events.eject_request) { event_code = MEC_EJECT_REQUESTED; s->events.eject_request = false; } } buf[4] = event_code; buf[5] = media_status; /* These fields are reserved, just clear them. */ buf[6] = 0; buf[7] = 0; return 8; /* We wrote to 4 extra bytes from the header */ } /* * Before transferring data or otherwise signalling acceptance of a command * marked CONDDATA, we must check the validity of the byte_count_limit. */ static bool validate_bcl(IDEState *s) { /* TODO: Check IDENTIFY data word 125 for defacult BCL (currently 0) */ if (s->atapi_dma || atapi_byte_count_limit(s)) { return true; } /* TODO: Move abort back into core.c and introduce proper error flow between * ATAPI layer and IDE core layer */ ide_abort_command(s); return false; } static void cmd_get_event_status_notification(IDEState *s, uint8_t *buf) { const uint8_t *packet = buf; struct { uint8_t opcode; uint8_t polled; /* lsb bit is polled; others are reserved */ uint8_t reserved2[2]; uint8_t class; uint8_t reserved3[2]; uint16_t len; uint8_t control; } QEMU_PACKED *gesn_cdb; struct { uint16_t len; uint8_t notification_class; uint8_t supported_events; } QEMU_PACKED *gesn_event_header; unsigned int max_len, used_len; gesn_cdb = (void *)packet; gesn_event_header = (void *)buf; max_len = be16_to_cpu(gesn_cdb->len); /* It is fine by the MMC spec to not support async mode operations */ if (!(gesn_cdb->polled & 0x01)) { /* asynchronous mode */ /* Only polling is supported, asynchronous mode is not. */ ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET); return; } /* polling mode operation */ /* * These are the supported events. * * We currently only support requests of the 'media' type. * Notification class requests and supported event classes are bitmasks, * but they are build from the same values as the "notification class" * field. */ gesn_event_header->supported_events = 1 << GESN_MEDIA; /* * We use |= below to set the class field; other bits in this byte * are reserved now but this is useful to do if we have to use the * reserved fields later. */ gesn_event_header->notification_class = 0; /* * Responses to requests are to be based on request priority. The * notification_class_request_type enum above specifies the * priority: upper elements are higher prio than lower ones. */ if (gesn_cdb->class & (1 << GESN_MEDIA)) { gesn_event_header->notification_class |= GESN_MEDIA; used_len = event_status_media(s, buf); } else { gesn_event_header->notification_class = 0x80; /* No event available */ used_len = sizeof(*gesn_event_header); } gesn_event_header->len = cpu_to_be16(used_len - sizeof(*gesn_event_header)); ide_atapi_cmd_reply(s, used_len, max_len); } static void cmd_request_sense(IDEState *s, uint8_t *buf) { int max_len = buf[4]; memset(buf, 0, 18); buf[0] = 0x70 | (1 << 7); buf[2] = s->sense_key; buf[7] = 10; buf[12] = s->asc; if (s->sense_key == UNIT_ATTENTION) { s->sense_key = NO_SENSE; } ide_atapi_cmd_reply(s, 18, max_len); } static void cmd_inquiry(IDEState *s, uint8_t *buf) { uint8_t page_code = buf[2]; int max_len = buf[4]; unsigned idx = 0; unsigned size_idx; unsigned preamble_len; /* If the EVPD (Enable Vital Product Data) bit is set in byte 1, * we are being asked for a specific page of info indicated by byte 2. */ if (buf[1] & 0x01) { preamble_len = 4; size_idx = 3; buf[idx++] = 0x05; /* CD-ROM */ buf[idx++] = page_code; /* Page Code */ buf[idx++] = 0x00; /* reserved */ idx++; /* length (set later) */ switch (page_code) { case 0x00: /* Supported Pages: List of supported VPD responses. */ buf[idx++] = 0x00; /* 0x00: Supported Pages, and: */ buf[idx++] = 0x83; /* 0x83: Device Identification. */ break; case 0x83: /* Device Identification. Each entry is optional, but the entries * included here are modeled after libata's VPD responses. * If the response is given, at least one entry must be present. */ /* Entry 1: Serial */ if (idx + 24 > max_len) { /* Not enough room for even the first entry: */ /* 4 byte header + 20 byte string */ ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_DATA_PHASE_ERROR); return; } buf[idx++] = 0x02; /* Ascii */ buf[idx++] = 0x00; /* Vendor Specific */ buf[idx++] = 0x00; buf[idx++] = 20; /* Remaining length */ padstr8(buf + idx, 20, s->drive_serial_str); idx += 20; /* Entry 2: Drive Model and Serial */ if (idx + 72 > max_len) { /* 4 (header) + 8 (vendor) + 60 (model & serial) */ goto out; } buf[idx++] = 0x02; /* Ascii */ buf[idx++] = 0x01; /* T10 Vendor */ buf[idx++] = 0x00; buf[idx++] = 68; padstr8(buf + idx, 8, "ATA"); /* Generic T10 vendor */ idx += 8; padstr8(buf + idx, 40, s->drive_model_str); idx += 40; padstr8(buf + idx, 20, s->drive_serial_str); idx += 20; /* Entry 3: WWN */ if (s->wwn && (idx + 12 <= max_len)) { /* 4 byte header + 8 byte wwn */ buf[idx++] = 0x01; /* Binary */ buf[idx++] = 0x03; /* NAA */ buf[idx++] = 0x00; buf[idx++] = 0x08; stq_be_p(&buf[idx], s->wwn); idx += 8; } break; default: /* SPC-3, revision 23 sec. 6.4 */ ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET); return; } } else { preamble_len = 5; size_idx = 4; buf[0] = 0x05; /* CD-ROM */ buf[1] = 0x80; /* removable */ buf[2] = 0x00; /* ISO */ buf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */ /* buf[size_idx] set below. */ buf[5] = 0; /* reserved */ buf[6] = 0; /* reserved */ buf[7] = 0; /* reserved */ padstr8(buf + 8, 8, "QEMU"); padstr8(buf + 16, 16, "QEMU DVD-ROM"); padstr8(buf + 32, 4, s->version); idx = 36; } out: buf[size_idx] = idx - preamble_len; ide_atapi_cmd_reply(s, idx, max_len); } static void cmd_get_configuration(IDEState *s, uint8_t *buf) { uint32_t len; uint8_t index = 0; int max_len; /* only feature 0 is supported */ if (buf[2] != 0 || buf[3] != 0) { ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET); return; } /* XXX: could result in alignment problems in some architectures */ max_len = lduw_be_p(buf + 7); /* * XXX: avoid overflow for io_buffer if max_len is bigger than * the size of that buffer (dimensioned to max number of * sectors to transfer at once) * * Only a problem if the feature/profiles grow. */ if (max_len > BDRV_SECTOR_SIZE) { /* XXX: assume 1 sector */ max_len = BDRV_SECTOR_SIZE; } memset(buf, 0, max_len); /* * the number of sectors from the media tells us which profile * to use as current. 0 means there is no media */ if (media_is_dvd(s)) { stw_be_p(buf + 6, MMC_PROFILE_DVD_ROM); } else if (media_is_cd(s)) { stw_be_p(buf + 6, MMC_PROFILE_CD_ROM); } buf[10] = 0x02 | 0x01; /* persistent and current */ len = 12; /* headers: 8 + 4 */ len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_DVD_ROM); len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_CD_ROM); stl_be_p(buf, len - 4); /* data length */ ide_atapi_cmd_reply(s, len, max_len); } static void cmd_mode_sense(IDEState *s, uint8_t *buf) { int action, code; int max_len; max_len = lduw_be_p(buf + 7); action = buf[2] >> 6; code = buf[2] & 0x3f; switch(action) { case 0: /* current values */ switch(code) { case MODE_PAGE_R_W_ERROR: /* error recovery */ stw_be_p(&buf[0], 16 - 2); buf[2] = 0x70; buf[3] = 0; buf[4] = 0; buf[5] = 0; buf[6] = 0; buf[7] = 0; buf[8] = MODE_PAGE_R_W_ERROR; buf[9] = 16 - 10; buf[10] = 0x00; buf[11] = 0x05; buf[12] = 0x00; buf[13] = 0x00; buf[14] = 0x00; buf[15] = 0x00; ide_atapi_cmd_reply(s, 16, max_len); break; case MODE_PAGE_AUDIO_CTL: stw_be_p(&buf[0], 24 - 2); buf[2] = 0x70; buf[3] = 0; buf[4] = 0; buf[5] = 0; buf[6] = 0; buf[7] = 0; buf[8] = MODE_PAGE_AUDIO_CTL; buf[9] = 24 - 10; /* Fill with CDROM audio volume */ buf[17] = 0; buf[19] = 0; buf[21] = 0; buf[23] = 0; ide_atapi_cmd_reply(s, 24, max_len); break; case MODE_PAGE_CAPABILITIES: stw_be_p(&buf[0], 30 - 2); buf[2] = 0x70; buf[3] = 0; buf[4] = 0; buf[5] = 0; buf[6] = 0; buf[7] = 0; buf[8] = MODE_PAGE_CAPABILITIES; buf[9] = 30 - 10; buf[10] = 0x3b; /* read CDR/CDRW/DVDROM/DVDR/DVDRAM */ buf[11] = 0x00; /* Claim PLAY_AUDIO capability (0x01) since some Linux code checks for this to automount media. */ buf[12] = 0x71; buf[13] = 3 << 5; buf[14] = (1 << 0) | (1 << 3) | (1 << 5); if (s->tray_locked) { buf[14] |= 1 << 1; } buf[15] = 0x00; /* No volume & mute control, no changer */ stw_be_p(&buf[16], 704); /* 4x read speed */ buf[18] = 0; /* Two volume levels */ buf[19] = 2; stw_be_p(&buf[20], 512); /* 512k buffer */ stw_be_p(&buf[22], 704); /* 4x read speed current */ buf[24] = 0; buf[25] = 0; buf[26] = 0; buf[27] = 0; buf[28] = 0; buf[29] = 0; ide_atapi_cmd_reply(s, 30, max_len); break; default: goto error_cmd; } break; case 1: /* changeable values */ goto error_cmd; case 2: /* default values */ goto error_cmd; default: case 3: /* saved values */ ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_SAVING_PARAMETERS_NOT_SUPPORTED); break; } return; error_cmd: ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET); } static void cmd_test_unit_ready(IDEState *s, uint8_t *buf) { /* Not Ready Conditions are already handled in ide_atapi_cmd(), so if we * come here, we know that it's ready. */ ide_atapi_cmd_ok(s); } static void cmd_prevent_allow_medium_removal(IDEState *s, uint8_t* buf) { s->tray_locked = buf[4] & 1; blk_lock_medium(s->blk, buf[4] & 1); ide_atapi_cmd_ok(s); } static void cmd_read(IDEState *s, uint8_t* buf) { unsigned int nb_sectors, lba; /* Total logical sectors of ATAPI_SECTOR_SIZE(=2048) bytes */ uint64_t total_sectors = s->nb_sectors >> 2; if (buf[0] == GPCMD_READ_10) { nb_sectors = lduw_be_p(buf + 7); } else { nb_sectors = ldl_be_p(buf + 6); } if (nb_sectors == 0) { ide_atapi_cmd_ok(s); return; } lba = ldl_be_p(buf + 2); if (lba >= total_sectors || lba + nb_sectors - 1 >= total_sectors) { ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR); return; } ide_atapi_cmd_read(s, lba, nb_sectors, 2048); } static void cmd_read_cd(IDEState *s, uint8_t* buf) { unsigned int nb_sectors, lba, transfer_request; /* Total logical sectors of ATAPI_SECTOR_SIZE(=2048) bytes */ uint64_t total_sectors = s->nb_sectors >> 2; nb_sectors = (buf[6] << 16) | (buf[7] << 8) | buf[8]; if (nb_sectors == 0) { ide_atapi_cmd_ok(s); return; } lba = ldl_be_p(buf + 2); if (lba >= total_sectors || lba + nb_sectors - 1 >= total_sectors) { ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR); return; } transfer_request = buf[9] & 0xf8; if (transfer_request == 0x00) { /* nothing */ ide_atapi_cmd_ok(s); return; } /* Check validity of BCL before transferring data */ if (!validate_bcl(s)) { return; } switch (transfer_request) { case 0x10: /* normal read */ ide_atapi_cmd_read(s, lba, nb_sectors, 2048); break; case 0xf8: /* read all data */ ide_atapi_cmd_read(s, lba, nb_sectors, 2352); break; default: ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET); break; } } static void cmd_seek(IDEState *s, uint8_t* buf) { unsigned int lba; uint64_t total_sectors = s->nb_sectors >> 2; lba = ldl_be_p(buf + 2); if (lba >= total_sectors) { ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR); return; } ide_atapi_cmd_ok(s); } static void cmd_start_stop_unit(IDEState *s, uint8_t* buf) { int sense; bool start = buf[4] & 1; bool loej = buf[4] & 2; /* load on start, eject on !start */ int pwrcnd = buf[4] & 0xf0; if (pwrcnd) { /* eject/load only happens for power condition == 0 */ ide_atapi_cmd_ok(s); return; } if (loej) { if (!start && !s->tray_open && s->tray_locked) { sense = blk_is_inserted(s->blk) ? NOT_READY : ILLEGAL_REQUEST; ide_atapi_cmd_error(s, sense, ASC_MEDIA_REMOVAL_PREVENTED); return; } if (s->tray_open != !start) { blk_eject(s->blk, !start); s->tray_open = !start; } } ide_atapi_cmd_ok(s); } static void cmd_mechanism_status(IDEState *s, uint8_t* buf) { int max_len = lduw_be_p(buf + 8); stw_be_p(buf, 0); /* no current LBA */ buf[2] = 0; buf[3] = 0; buf[4] = 0; buf[5] = 1; stw_be_p(buf + 6, 0); ide_atapi_cmd_reply(s, 8, max_len); } static void cmd_read_toc_pma_atip(IDEState *s, uint8_t* buf) { int format, msf, start_track, len; int max_len; uint64_t total_sectors = s->nb_sectors >> 2; max_len = lduw_be_p(buf + 7); format = buf[9] >> 6; msf = (buf[1] >> 1) & 1; start_track = buf[6]; switch(format) { case 0: len = cdrom_read_toc(total_sectors, buf, msf, start_track); if (len < 0) goto error_cmd; ide_atapi_cmd_reply(s, len, max_len); break; case 1: /* multi session : only a single session defined */ memset(buf, 0, 12); buf[1] = 0x0a; buf[2] = 0x01; buf[3] = 0x01; ide_atapi_cmd_reply(s, 12, max_len); break; case 2: len = cdrom_read_toc_raw(total_sectors, buf, msf, start_track); if (len < 0) goto error_cmd; ide_atapi_cmd_reply(s, len, max_len); break; default: error_cmd: ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET); } } static void cmd_read_cdvd_capacity(IDEState *s, uint8_t* buf) { uint64_t total_sectors = s->nb_sectors >> 2; /* NOTE: it is really the number of sectors minus 1 */ stl_be_p(buf, total_sectors - 1); stl_be_p(buf + 4, 2048); ide_atapi_cmd_reply(s, 8, 8); } static void cmd_read_disc_information(IDEState *s, uint8_t* buf) { uint8_t type = buf[1] & 7; uint32_t max_len = lduw_be_p(buf + 7); /* Types 1/2 are only defined for Blu-Ray. */ if (type != 0) { ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET); return; } memset(buf, 0, 34); buf[1] = 32; buf[2] = 0xe; /* last session complete, disc finalized */ buf[3] = 1; /* first track on disc */ buf[4] = 1; /* # of sessions */ buf[5] = 1; /* first track of last session */ buf[6] = 1; /* last track of last session */ buf[7] = 0x20; /* unrestricted use */ buf[8] = 0x00; /* CD-ROM or DVD-ROM */ /* 9-10-11: most significant byte corresponding bytes 4-5-6 */ /* 12-23: not meaningful for CD-ROM or DVD-ROM */ /* 24-31: disc bar code */ /* 32: disc application code */ /* 33: number of OPC tables */ ide_atapi_cmd_reply(s, 34, max_len); } static void cmd_read_dvd_structure(IDEState *s, uint8_t* buf) { int max_len; int media = buf[1]; int format = buf[7]; int ret; max_len = lduw_be_p(buf + 8); if (format < 0xff) { if (media_is_cd(s)) { ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INCOMPATIBLE_FORMAT); return; } else if (!media_present(s)) { ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET); return; } } memset(buf, 0, max_len > IDE_DMA_BUF_SECTORS * BDRV_SECTOR_SIZE + 4 ? IDE_DMA_BUF_SECTORS * BDRV_SECTOR_SIZE + 4 : max_len); switch (format) { case 0x00 ... 0x7f: case 0xff: if (media == 0) { ret = ide_dvd_read_structure(s, format, buf, buf); if (ret < 0) { ide_atapi_cmd_error(s, ILLEGAL_REQUEST, -ret); } else { ide_atapi_cmd_reply(s, ret, max_len); } break; } /* TODO: BD support, fall through for now */ /* Generic disk structures */ case 0x80: /* TODO: AACS volume identifier */ case 0x81: /* TODO: AACS media serial number */ case 0x82: /* TODO: AACS media identifier */ case 0x83: /* TODO: AACS media key block */ case 0x90: /* TODO: List of recognized format layers */ case 0xc0: /* TODO: Write protection status */ default: ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET); break; } } static void cmd_set_speed(IDEState *s, uint8_t* buf) { ide_atapi_cmd_ok(s); } enum { /* * Only commands flagged as ALLOW_UA are allowed to run under a * unit attention condition. (See MMC-5, section 4.1.6.1) */ ALLOW_UA = 0x01, /* * Commands flagged with CHECK_READY can only execute if a medium is present. * Otherwise they report the Not Ready Condition. (See MMC-5, section * 4.1.8) */ CHECK_READY = 0x02, /* * Commands flagged with NONDATA do not in any circumstances return * any data via ide_atapi_cmd_reply. These commands are exempt from * the normal byte_count_limit constraints. * See ATA8-ACS3 "7.21.5 Byte Count Limit" */ NONDATA = 0x04, /* * CONDDATA implies a command that transfers data only conditionally based * on the presence of suboptions. It should be exempt from the BCL check at * command validation time, but it needs to be checked at the command * handler level instead. */ CONDDATA = 0x08, }; static const struct AtapiCmd { void (*handler)(IDEState *s, uint8_t *buf); int flags; } atapi_cmd_table[0x100] = { [ 0x00 ] = { cmd_test_unit_ready, CHECK_READY | NONDATA }, [ 0x03 ] = { cmd_request_sense, ALLOW_UA }, [ 0x12 ] = { cmd_inquiry, ALLOW_UA }, [ 0x1b ] = { cmd_start_stop_unit, NONDATA }, /* [1] */ [ 0x1e ] = { cmd_prevent_allow_medium_removal, NONDATA }, [ 0x25 ] = { cmd_read_cdvd_capacity, CHECK_READY }, [ 0x28 ] = { cmd_read, /* (10) */ CHECK_READY }, [ 0x2b ] = { cmd_seek, CHECK_READY | NONDATA }, [ 0x43 ] = { cmd_read_toc_pma_atip, CHECK_READY }, [ 0x46 ] = { cmd_get_configuration, ALLOW_UA }, [ 0x4a ] = { cmd_get_event_status_notification, ALLOW_UA }, [ 0x51 ] = { cmd_read_disc_information, CHECK_READY }, [ 0x5a ] = { cmd_mode_sense, /* (10) */ 0 }, [ 0xa8 ] = { cmd_read, /* (12) */ CHECK_READY }, [ 0xad ] = { cmd_read_dvd_structure, CHECK_READY }, [ 0xbb ] = { cmd_set_speed, NONDATA }, [ 0xbd ] = { cmd_mechanism_status, 0 }, [ 0xbe ] = { cmd_read_cd, CHECK_READY | CONDDATA }, /* [1] handler detects and reports not ready condition itself */ }; void ide_atapi_cmd(IDEState *s) { uint8_t *buf = s->io_buffer; const struct AtapiCmd *cmd = &atapi_cmd_table[s->io_buffer[0]]; trace_ide_atapi_cmd(s, s->io_buffer[0]); if (trace_event_get_state_backends(TRACE_IDE_ATAPI_CMD_PACKET)) { /* Each pretty-printed byte needs two bytes and a space; */ char *ppacket = g_malloc(ATAPI_PACKET_SIZE * 3 + 1); int i; for (i = 0; i < ATAPI_PACKET_SIZE; i++) { sprintf(ppacket + (i * 3), "%02x ", buf[i]); } trace_ide_atapi_cmd_packet(s, s->lcyl | (s->hcyl << 8), ppacket); g_free(ppacket); } /* * If there's a UNIT_ATTENTION condition pending, only command flagged with * ALLOW_UA are allowed to complete. with other commands getting a CHECK * condition response unless a higher priority status, defined by the drive * here, is pending. */ if (s->sense_key == UNIT_ATTENTION && !(cmd->flags & ALLOW_UA)) { ide_atapi_cmd_check_status(s); return; } /* * When a CD gets changed, we have to report an ejected state and * then a loaded state to guests so that they detect tray * open/close and media change events. Guests that do not use * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close * states rely on this behavior. */ if (!(cmd->flags & ALLOW_UA) && !s->tray_open && blk_is_inserted(s->blk) && s->cdrom_changed) { if (s->cdrom_changed == 1) { ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT); s->cdrom_changed = 2; } else { ide_atapi_cmd_error(s, UNIT_ATTENTION, ASC_MEDIUM_MAY_HAVE_CHANGED); s->cdrom_changed = 0; } return; } /* Report a Not Ready condition if appropriate for the command */ if ((cmd->flags & CHECK_READY) && (!media_present(s) || !blk_is_inserted(s->blk))) { ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT); return; } /* Commands that don't transfer DATA permit the byte_count_limit to be 0. * If this is a data-transferring PIO command and BCL is 0, * we abort at the /ATA/ level, not the ATAPI level. * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */ if (cmd->handler && !(cmd->flags & (NONDATA | CONDDATA))) { if (!validate_bcl(s)) { return; } } /* Execute the command */ if (cmd->handler) { cmd->handler(s, buf); return; } ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_ILLEGAL_OPCODE); }