/* * QEMU ESCC (Z8030/Z8530/Z85C30/SCC/ESCC) serial port emulation * * Copyright (c) 2003-2005 Fabrice Bellard * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include "hw/hw.h" #include "hw/sysbus.h" #include "hw/char/escc.h" #include "sysemu/char.h" #include "ui/console.h" #include "ui/input.h" #include "trace.h" /* * Chipset docs: * "Z80C30/Z85C30/Z80230/Z85230/Z85233 SCC/ESCC User Manual", * http://www.zilog.com/docs/serial/scc_escc_um.pdf * * On Sparc32 this is the serial port, mouse and keyboard part of chip STP2001 * (Slave I/O), also produced as NCR89C105. See * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt * * The serial ports implement full AMD AM8530 or Zilog Z8530 chips, * mouse and keyboard ports don't implement all functions and they are * only asynchronous. There is no DMA. * * Z85C30 is also used on PowerMacs. There are some small differences * between Sparc version (sunzilog) and PowerMac (pmac): * Offset between control and data registers * There is some kind of lockup bug, but we can ignore it * CTS is inverted * DMA on pmac using DBDMA chip * pmac can do IRDA and faster rates, sunzilog can only do 38400 * pmac baud rate generator clock is 3.6864 MHz, sunzilog 4.9152 MHz */ /* * Modifications: * 2006-Aug-10 Igor Kovalenko : Renamed KBDQueue to SERIOQueue, implemented * serial mouse queue. * Implemented serial mouse protocol. * * 2010-May-23 Artyom Tarasenko: Reworked IUS logic */ typedef enum { chn_a, chn_b, } ChnID; #define CHN_C(s) ((s)->chn == chn_b? 'b' : 'a') typedef enum { ser, kbd, mouse, } ChnType; #define SERIO_QUEUE_SIZE 256 typedef struct { uint8_t data[SERIO_QUEUE_SIZE]; int rptr, wptr, count; } SERIOQueue; #define SERIAL_REGS 16 typedef struct ChannelState { qemu_irq irq; uint32_t rxint, txint, rxint_under_svc, txint_under_svc; struct ChannelState *otherchn; uint32_t reg; uint8_t wregs[SERIAL_REGS], rregs[SERIAL_REGS]; SERIOQueue queue; CharDriverState *chr; int e0_mode, led_mode, caps_lock_mode, num_lock_mode; int disabled; int clock; uint32_t vmstate_dummy; ChnID chn; // this channel, A (base+4) or B (base+0) ChnType type; uint8_t rx, tx; QemuInputHandlerState *hs; } ChannelState; #define ESCC(obj) OBJECT_CHECK(ESCCState, (obj), TYPE_ESCC) typedef struct ESCCState { SysBusDevice parent_obj; struct ChannelState chn[2]; uint32_t it_shift; MemoryRegion mmio; uint32_t disabled; uint32_t frequency; } ESCCState; #define SERIAL_CTRL 0 #define SERIAL_DATA 1 #define W_CMD 0 #define CMD_PTR_MASK 0x07 #define CMD_CMD_MASK 0x38 #define CMD_HI 0x08 #define CMD_CLR_TXINT 0x28 #define CMD_CLR_IUS 0x38 #define W_INTR 1 #define INTR_INTALL 0x01 #define INTR_TXINT 0x02 #define INTR_RXMODEMSK 0x18 #define INTR_RXINT1ST 0x08 #define INTR_RXINTALL 0x10 #define W_IVEC 2 #define W_RXCTRL 3 #define RXCTRL_RXEN 0x01 #define W_TXCTRL1 4 #define TXCTRL1_PAREN 0x01 #define TXCTRL1_PAREV 0x02 #define TXCTRL1_1STOP 0x04 #define TXCTRL1_1HSTOP 0x08 #define TXCTRL1_2STOP 0x0c #define TXCTRL1_STPMSK 0x0c #define TXCTRL1_CLK1X 0x00 #define TXCTRL1_CLK16X 0x40 #define TXCTRL1_CLK32X 0x80 #define TXCTRL1_CLK64X 0xc0 #define TXCTRL1_CLKMSK 0xc0 #define W_TXCTRL2 5 #define TXCTRL2_TXEN 0x08 #define TXCTRL2_BITMSK 0x60 #define TXCTRL2_5BITS 0x00 #define TXCTRL2_7BITS 0x20 #define TXCTRL2_6BITS 0x40 #define TXCTRL2_8BITS 0x60 #define W_SYNC1 6 #define W_SYNC2 7 #define W_TXBUF 8 #define W_MINTR 9 #define MINTR_STATUSHI 0x10 #define MINTR_RST_MASK 0xc0 #define MINTR_RST_B 0x40 #define MINTR_RST_A 0x80 #define MINTR_RST_ALL 0xc0 #define W_MISC1 10 #define W_CLOCK 11 #define CLOCK_TRXC 0x08 #define W_BRGLO 12 #define W_BRGHI 13 #define W_MISC2 14 #define MISC2_PLLDIS 0x30 #define W_EXTINT 15 #define EXTINT_DCD 0x08 #define EXTINT_SYNCINT 0x10 #define EXTINT_CTSINT 0x20 #define EXTINT_TXUNDRN 0x40 #define EXTINT_BRKINT 0x80 #define R_STATUS 0 #define STATUS_RXAV 0x01 #define STATUS_ZERO 0x02 #define STATUS_TXEMPTY 0x04 #define STATUS_DCD 0x08 #define STATUS_SYNC 0x10 #define STATUS_CTS 0x20 #define STATUS_TXUNDRN 0x40 #define STATUS_BRK 0x80 #define R_SPEC 1 #define SPEC_ALLSENT 0x01 #define SPEC_BITS8 0x06 #define R_IVEC 2 #define IVEC_TXINTB 0x00 #define IVEC_LONOINT 0x06 #define IVEC_LORXINTA 0x0c #define IVEC_LORXINTB 0x04 #define IVEC_LOTXINTA 0x08 #define IVEC_HINOINT 0x60 #define IVEC_HIRXINTA 0x30 #define IVEC_HIRXINTB 0x20 #define IVEC_HITXINTA 0x10 #define R_INTR 3 #define INTR_EXTINTB 0x01 #define INTR_TXINTB 0x02 #define INTR_RXINTB 0x04 #define INTR_EXTINTA 0x08 #define INTR_TXINTA 0x10 #define INTR_RXINTA 0x20 #define R_IPEN 4 #define R_TXCTRL1 5 #define R_TXCTRL2 6 #define R_BC 7 #define R_RXBUF 8 #define R_RXCTRL 9 #define R_MISC 10 #define R_MISC1 11 #define R_BRGLO 12 #define R_BRGHI 13 #define R_MISC1I 14 #define R_EXTINT 15 static void handle_kbd_command(ChannelState *s, int val); static int serial_can_receive(void *opaque); static void serial_receive_byte(ChannelState *s, int ch); static void clear_queue(void *opaque) { ChannelState *s = opaque; SERIOQueue *q = &s->queue; q->rptr = q->wptr = q->count = 0; } static void put_queue(void *opaque, int b) { ChannelState *s = opaque; SERIOQueue *q = &s->queue; trace_escc_put_queue(CHN_C(s), b); if (q->count >= SERIO_QUEUE_SIZE) return; q->data[q->wptr] = b; if (++q->wptr == SERIO_QUEUE_SIZE) q->wptr = 0; q->count++; serial_receive_byte(s, 0); } static uint32_t get_queue(void *opaque) { ChannelState *s = opaque; SERIOQueue *q = &s->queue; int val; if (q->count == 0) { return 0; } else { val = q->data[q->rptr]; if (++q->rptr == SERIO_QUEUE_SIZE) q->rptr = 0; q->count--; } trace_escc_get_queue(CHN_C(s), val); if (q->count > 0) serial_receive_byte(s, 0); return val; } static int escc_update_irq_chn(ChannelState *s) { if ((((s->wregs[W_INTR] & INTR_TXINT) && (s->txint == 1)) || // tx ints enabled, pending ((((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINT1ST) || ((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINTALL)) && s->rxint == 1) || // rx ints enabled, pending ((s->wregs[W_EXTINT] & EXTINT_BRKINT) && (s->rregs[R_STATUS] & STATUS_BRK)))) { // break int e&p return 1; } return 0; } static void escc_update_irq(ChannelState *s) { int irq; irq = escc_update_irq_chn(s); irq |= escc_update_irq_chn(s->otherchn); trace_escc_update_irq(irq); qemu_set_irq(s->irq, irq); } static void escc_reset_chn(ChannelState *s) { int i; s->reg = 0; for (i = 0; i < SERIAL_REGS; i++) { s->rregs[i] = 0; s->wregs[i] = 0; } s->wregs[W_TXCTRL1] = TXCTRL1_1STOP; // 1X divisor, 1 stop bit, no parity s->wregs[W_MINTR] = MINTR_RST_ALL; s->wregs[W_CLOCK] = CLOCK_TRXC; // Synch mode tx clock = TRxC s->wregs[W_MISC2] = MISC2_PLLDIS; // PLL disabled s->wregs[W_EXTINT] = EXTINT_DCD | EXTINT_SYNCINT | EXTINT_CTSINT | EXTINT_TXUNDRN | EXTINT_BRKINT; // Enable most interrupts if (s->disabled) s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_DCD | STATUS_SYNC | STATUS_CTS | STATUS_TXUNDRN; else s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_TXUNDRN; s->rregs[R_SPEC] = SPEC_BITS8 | SPEC_ALLSENT; s->rx = s->tx = 0; s->rxint = s->txint = 0; s->rxint_under_svc = s->txint_under_svc = 0; s->e0_mode = s->led_mode = s->caps_lock_mode = s->num_lock_mode = 0; clear_queue(s); } static void escc_reset(DeviceState *d) { ESCCState *s = ESCC(d); escc_reset_chn(&s->chn[0]); escc_reset_chn(&s->chn[1]); } static inline void set_rxint(ChannelState *s) { s->rxint = 1; /* XXX: missing daisy chainnig: chn_b rx should have a lower priority than chn_a rx/tx/special_condition service*/ s->rxint_under_svc = 1; if (s->chn == chn_a) { s->rregs[R_INTR] |= INTR_RXINTA; if (s->wregs[W_MINTR] & MINTR_STATUSHI) s->otherchn->rregs[R_IVEC] = IVEC_HIRXINTA; else s->otherchn->rregs[R_IVEC] = IVEC_LORXINTA; } else { s->otherchn->rregs[R_INTR] |= INTR_RXINTB; if (s->wregs[W_MINTR] & MINTR_STATUSHI) s->rregs[R_IVEC] = IVEC_HIRXINTB; else s->rregs[R_IVEC] = IVEC_LORXINTB; } escc_update_irq(s); } static inline void set_txint(ChannelState *s) { s->txint = 1; if (!s->rxint_under_svc) { s->txint_under_svc = 1; if (s->chn == chn_a) { if (s->wregs[W_INTR] & INTR_TXINT) { s->rregs[R_INTR] |= INTR_TXINTA; } if (s->wregs[W_MINTR] & MINTR_STATUSHI) s->otherchn->rregs[R_IVEC] = IVEC_HITXINTA; else s->otherchn->rregs[R_IVEC] = IVEC_LOTXINTA; } else { s->rregs[R_IVEC] = IVEC_TXINTB; if (s->wregs[W_INTR] & INTR_TXINT) { s->otherchn->rregs[R_INTR] |= INTR_TXINTB; } } escc_update_irq(s); } } static inline void clr_rxint(ChannelState *s) { s->rxint = 0; s->rxint_under_svc = 0; if (s->chn == chn_a) { if (s->wregs[W_MINTR] & MINTR_STATUSHI) s->otherchn->rregs[R_IVEC] = IVEC_HINOINT; else s->otherchn->rregs[R_IVEC] = IVEC_LONOINT; s->rregs[R_INTR] &= ~INTR_RXINTA; } else { if (s->wregs[W_MINTR] & MINTR_STATUSHI) s->rregs[R_IVEC] = IVEC_HINOINT; else s->rregs[R_IVEC] = IVEC_LONOINT; s->otherchn->rregs[R_INTR] &= ~INTR_RXINTB; } if (s->txint) set_txint(s); escc_update_irq(s); } static inline void clr_txint(ChannelState *s) { s->txint = 0; s->txint_under_svc = 0; if (s->chn == chn_a) { if (s->wregs[W_MINTR] & MINTR_STATUSHI) s->otherchn->rregs[R_IVEC] = IVEC_HINOINT; else s->otherchn->rregs[R_IVEC] = IVEC_LONOINT; s->rregs[R_INTR] &= ~INTR_TXINTA; } else { s->otherchn->rregs[R_INTR] &= ~INTR_TXINTB; if (s->wregs[W_MINTR] & MINTR_STATUSHI) s->rregs[R_IVEC] = IVEC_HINOINT; else s->rregs[R_IVEC] = IVEC_LONOINT; s->otherchn->rregs[R_INTR] &= ~INTR_TXINTB; } if (s->rxint) set_rxint(s); escc_update_irq(s); } static void escc_update_parameters(ChannelState *s) { int speed, parity, data_bits, stop_bits; QEMUSerialSetParams ssp; if (!s->chr || s->type != ser) return; if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREN) { if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREV) parity = 'E'; else parity = 'O'; } else { parity = 'N'; } if ((s->wregs[W_TXCTRL1] & TXCTRL1_STPMSK) == TXCTRL1_2STOP) stop_bits = 2; else stop_bits = 1; switch (s->wregs[W_TXCTRL2] & TXCTRL2_BITMSK) { case TXCTRL2_5BITS: data_bits = 5; break; case TXCTRL2_7BITS: data_bits = 7; break; case TXCTRL2_6BITS: data_bits = 6; break; default: case TXCTRL2_8BITS: data_bits = 8; break; } speed = s->clock / ((s->wregs[W_BRGLO] | (s->wregs[W_BRGHI] << 8)) + 2); switch (s->wregs[W_TXCTRL1] & TXCTRL1_CLKMSK) { case TXCTRL1_CLK1X: break; case TXCTRL1_CLK16X: speed /= 16; break; case TXCTRL1_CLK32X: speed /= 32; break; default: case TXCTRL1_CLK64X: speed /= 64; break; } ssp.speed = speed; ssp.parity = parity; ssp.data_bits = data_bits; ssp.stop_bits = stop_bits; trace_escc_update_parameters(CHN_C(s), speed, parity, data_bits, stop_bits); qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); } static void escc_mem_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { ESCCState *serial = opaque; ChannelState *s; uint32_t saddr; int newreg, channel; val &= 0xff; saddr = (addr >> serial->it_shift) & 1; channel = (addr >> (serial->it_shift + 1)) & 1; s = &serial->chn[channel]; switch (saddr) { case SERIAL_CTRL: trace_escc_mem_writeb_ctrl(CHN_C(s), s->reg, val & 0xff); newreg = 0; switch (s->reg) { case W_CMD: newreg = val & CMD_PTR_MASK; val &= CMD_CMD_MASK; switch (val) { case CMD_HI: newreg |= CMD_HI; break; case CMD_CLR_TXINT: clr_txint(s); break; case CMD_CLR_IUS: if (s->rxint_under_svc) { s->rxint_under_svc = 0; if (s->txint) { set_txint(s); } } else if (s->txint_under_svc) { s->txint_under_svc = 0; } escc_update_irq(s); break; default: break; } break; case W_INTR ... W_RXCTRL: case W_SYNC1 ... W_TXBUF: case W_MISC1 ... W_CLOCK: case W_MISC2 ... W_EXTINT: s->wregs[s->reg] = val; break; case W_TXCTRL1: case W_TXCTRL2: s->wregs[s->reg] = val; escc_update_parameters(s); break; case W_BRGLO: case W_BRGHI: s->wregs[s->reg] = val; s->rregs[s->reg] = val; escc_update_parameters(s); break; case W_MINTR: switch (val & MINTR_RST_MASK) { case 0: default: break; case MINTR_RST_B: escc_reset_chn(&serial->chn[0]); return; case MINTR_RST_A: escc_reset_chn(&serial->chn[1]); return; case MINTR_RST_ALL: escc_reset(DEVICE(serial)); return; } break; default: break; } if (s->reg == 0) s->reg = newreg; else s->reg = 0; break; case SERIAL_DATA: trace_escc_mem_writeb_data(CHN_C(s), val); s->tx = val; if (s->wregs[W_TXCTRL2] & TXCTRL2_TXEN) { // tx enabled if (s->chr) qemu_chr_fe_write(s->chr, &s->tx, 1); else if (s->type == kbd && !s->disabled) { handle_kbd_command(s, val); } } s->rregs[R_STATUS] |= STATUS_TXEMPTY; // Tx buffer empty s->rregs[R_SPEC] |= SPEC_ALLSENT; // All sent set_txint(s); break; default: break; } } static uint64_t escc_mem_read(void *opaque, hwaddr addr, unsigned size) { ESCCState *serial = opaque; ChannelState *s; uint32_t saddr; uint32_t ret; int channel; saddr = (addr >> serial->it_shift) & 1; channel = (addr >> (serial->it_shift + 1)) & 1; s = &serial->chn[channel]; switch (saddr) { case SERIAL_CTRL: trace_escc_mem_readb_ctrl(CHN_C(s), s->reg, s->rregs[s->reg]); ret = s->rregs[s->reg]; s->reg = 0; return ret; case SERIAL_DATA: s->rregs[R_STATUS] &= ~STATUS_RXAV; clr_rxint(s); if (s->type == kbd || s->type == mouse) ret = get_queue(s); else ret = s->rx; trace_escc_mem_readb_data(CHN_C(s), ret); if (s->chr) qemu_chr_accept_input(s->chr); return ret; default: break; } return 0; } static const MemoryRegionOps escc_mem_ops = { .read = escc_mem_read, .write = escc_mem_write, .endianness = DEVICE_NATIVE_ENDIAN, .valid = { .min_access_size = 1, .max_access_size = 1, }, }; static int serial_can_receive(void *opaque) { ChannelState *s = opaque; int ret; if (((s->wregs[W_RXCTRL] & RXCTRL_RXEN) == 0) // Rx not enabled || ((s->rregs[R_STATUS] & STATUS_RXAV) == STATUS_RXAV)) // char already available ret = 0; else ret = 1; return ret; } static void serial_receive_byte(ChannelState *s, int ch) { trace_escc_serial_receive_byte(CHN_C(s), ch); s->rregs[R_STATUS] |= STATUS_RXAV; s->rx = ch; set_rxint(s); } static void serial_receive_break(ChannelState *s) { s->rregs[R_STATUS] |= STATUS_BRK; escc_update_irq(s); } static void serial_receive1(void *opaque, const uint8_t *buf, int size) { ChannelState *s = opaque; serial_receive_byte(s, buf[0]); } static void serial_event(void *opaque, int event) { ChannelState *s = opaque; if (event == CHR_EVENT_BREAK) serial_receive_break(s); } static const VMStateDescription vmstate_escc_chn = { .name ="escc_chn", .version_id = 2, .minimum_version_id = 1, .minimum_version_id_old = 1, .fields = (VMStateField []) { VMSTATE_UINT32(vmstate_dummy, ChannelState), VMSTATE_UINT32(reg, ChannelState), VMSTATE_UINT32(rxint, ChannelState), VMSTATE_UINT32(txint, ChannelState), VMSTATE_UINT32(rxint_under_svc, ChannelState), VMSTATE_UINT32(txint_under_svc, ChannelState), VMSTATE_UINT8(rx, ChannelState), VMSTATE_UINT8(tx, ChannelState), VMSTATE_BUFFER(wregs, ChannelState), VMSTATE_BUFFER(rregs, ChannelState), VMSTATE_END_OF_LIST() } }; static const VMStateDescription vmstate_escc = { .name ="escc", .version_id = 2, .minimum_version_id = 1, .minimum_version_id_old = 1, .fields = (VMStateField []) { VMSTATE_STRUCT_ARRAY(chn, ESCCState, 2, 2, vmstate_escc_chn, ChannelState), VMSTATE_END_OF_LIST() } }; MemoryRegion *escc_init(hwaddr base, qemu_irq irqA, qemu_irq irqB, CharDriverState *chrA, CharDriverState *chrB, int clock, int it_shift) { DeviceState *dev; SysBusDevice *s; ESCCState *d; dev = qdev_create(NULL, TYPE_ESCC); qdev_prop_set_uint32(dev, "disabled", 0); qdev_prop_set_uint32(dev, "frequency", clock); qdev_prop_set_uint32(dev, "it_shift", it_shift); qdev_prop_set_chr(dev, "chrB", chrB); qdev_prop_set_chr(dev, "chrA", chrA); qdev_prop_set_uint32(dev, "chnBtype", ser); qdev_prop_set_uint32(dev, "chnAtype", ser); qdev_init_nofail(dev); s = SYS_BUS_DEVICE(dev); sysbus_connect_irq(s, 0, irqB); sysbus_connect_irq(s, 1, irqA); if (base) { sysbus_mmio_map(s, 0, base); } d = ESCC(s); return &d->mmio; } static const uint8_t qcode_to_keycode[Q_KEY_CODE_MAX] = { [Q_KEY_CODE_SHIFT] = 99, [Q_KEY_CODE_SHIFT_R] = 110, [Q_KEY_CODE_ALT] = 19, [Q_KEY_CODE_ALT_R] = 13, [Q_KEY_CODE_ALTGR] = 13, [Q_KEY_CODE_CTRL] = 76, [Q_KEY_CODE_CTRL_R] = 76, [Q_KEY_CODE_ESC] = 29, [Q_KEY_CODE_1] = 30, [Q_KEY_CODE_2] = 31, [Q_KEY_CODE_3] = 32, [Q_KEY_CODE_4] = 33, [Q_KEY_CODE_5] = 34, [Q_KEY_CODE_6] = 35, [Q_KEY_CODE_7] = 36, [Q_KEY_CODE_8] = 37, [Q_KEY_CODE_9] = 38, [Q_KEY_CODE_0] = 39, [Q_KEY_CODE_MINUS] = 40, [Q_KEY_CODE_EQUAL] = 41, [Q_KEY_CODE_BACKSPACE] = 43, [Q_KEY_CODE_TAB] = 53, [Q_KEY_CODE_Q] = 54, [Q_KEY_CODE_W] = 55, [Q_KEY_CODE_E] = 56, [Q_KEY_CODE_R] = 57, [Q_KEY_CODE_T] = 58, [Q_KEY_CODE_Y] = 59, [Q_KEY_CODE_U] = 60, [Q_KEY_CODE_I] = 61, [Q_KEY_CODE_O] = 62, [Q_KEY_CODE_P] = 63, [Q_KEY_CODE_BRACKET_LEFT] = 64, [Q_KEY_CODE_BRACKET_RIGHT] = 65, [Q_KEY_CODE_RET] = 89, [Q_KEY_CODE_A] = 77, [Q_KEY_CODE_S] = 78, [Q_KEY_CODE_D] = 79, [Q_KEY_CODE_F] = 80, [Q_KEY_CODE_G] = 81, [Q_KEY_CODE_H] = 82, [Q_KEY_CODE_J] = 83, [Q_KEY_CODE_K] = 84, [Q_KEY_CODE_L] = 85, [Q_KEY_CODE_SEMICOLON] = 86, [Q_KEY_CODE_APOSTROPHE] = 87, [Q_KEY_CODE_GRAVE_ACCENT] = 42, [Q_KEY_CODE_BACKSLASH] = 88, [Q_KEY_CODE_Z] = 100, [Q_KEY_CODE_X] = 101, [Q_KEY_CODE_C] = 102, [Q_KEY_CODE_V] = 103, [Q_KEY_CODE_B] = 104, [Q_KEY_CODE_N] = 105, [Q_KEY_CODE_M] = 106, [Q_KEY_CODE_COMMA] = 107, [Q_KEY_CODE_DOT] = 108, [Q_KEY_CODE_SLASH] = 109, [Q_KEY_CODE_ASTERISK] = 47, [Q_KEY_CODE_SPC] = 121, [Q_KEY_CODE_CAPS_LOCK] = 119, [Q_KEY_CODE_F1] = 5, [Q_KEY_CODE_F2] = 6, [Q_KEY_CODE_F3] = 8, [Q_KEY_CODE_F4] = 10, [Q_KEY_CODE_F5] = 12, [Q_KEY_CODE_F6] = 14, [Q_KEY_CODE_F7] = 16, [Q_KEY_CODE_F8] = 17, [Q_KEY_CODE_F9] = 18, [Q_KEY_CODE_F10] = 7, [Q_KEY_CODE_NUM_LOCK] = 98, [Q_KEY_CODE_SCROLL_LOCK] = 23, [Q_KEY_CODE_KP_DIVIDE] = 109, [Q_KEY_CODE_KP_MULTIPLY] = 47, [Q_KEY_CODE_KP_SUBTRACT] = 71, [Q_KEY_CODE_KP_ADD] = 125, [Q_KEY_CODE_KP_ENTER] = 90, [Q_KEY_CODE_KP_DECIMAL] = 50, [Q_KEY_CODE_KP_0] = 94, [Q_KEY_CODE_KP_1] = 112, [Q_KEY_CODE_KP_2] = 113, [Q_KEY_CODE_KP_3] = 114, [Q_KEY_CODE_KP_4] = 91, [Q_KEY_CODE_KP_5] = 92, [Q_KEY_CODE_KP_6] = 93, [Q_KEY_CODE_KP_7] = 68, [Q_KEY_CODE_KP_8] = 69, [Q_KEY_CODE_KP_9] = 70, [Q_KEY_CODE_LESS] = 124, [Q_KEY_CODE_F11] = 9, [Q_KEY_CODE_F12] = 11, [Q_KEY_CODE_HOME] = 68, [Q_KEY_CODE_PGUP] = 70, [Q_KEY_CODE_PGDN] = 114, [Q_KEY_CODE_END] = 112, [Q_KEY_CODE_LEFT] = 91, [Q_KEY_CODE_UP] = 69, [Q_KEY_CODE_DOWN] = 113, [Q_KEY_CODE_RIGHT] = 93, [Q_KEY_CODE_INSERT] = 94, [Q_KEY_CODE_DELETE] = 50, [Q_KEY_CODE_STOP] = 1, [Q_KEY_CODE_AGAIN] = 3, [Q_KEY_CODE_PROPS] = 25, [Q_KEY_CODE_UNDO] = 26, [Q_KEY_CODE_FRONT] = 49, [Q_KEY_CODE_COPY] = 52, [Q_KEY_CODE_OPEN] = 72, [Q_KEY_CODE_PASTE] = 73, [Q_KEY_CODE_FIND] = 97, [Q_KEY_CODE_CUT] = 99, [Q_KEY_CODE_LF] = 111, [Q_KEY_CODE_HELP] = 118, [Q_KEY_CODE_META_L] = 120, [Q_KEY_CODE_META_R] = 122, [Q_KEY_CODE_COMPOSE] = 67, }; static void sunkbd_handle_event(DeviceState *dev, QemuConsole *src, InputEvent *evt) { ChannelState *s = (ChannelState *)dev; int qcode, keycode; assert(evt->kind == INPUT_EVENT_KIND_KEY); qcode = qemu_input_key_value_to_qcode(evt->key->key); trace_escc_sunkbd_event_in(qcode, QKeyCode_lookup[qcode], evt->key->down); if (qcode == Q_KEY_CODE_CAPS_LOCK) { if (evt->key->down) { s->caps_lock_mode ^= 1; if (s->caps_lock_mode == 2) { return; /* Drop second press */ } } else { s->caps_lock_mode ^= 2; if (s->caps_lock_mode == 3) { return; /* Drop first release */ } } } if (qcode == Q_KEY_CODE_NUM_LOCK) { if (evt->key->down) { s->num_lock_mode ^= 1; if (s->num_lock_mode == 2) { return; /* Drop second press */ } } else { s->num_lock_mode ^= 2; if (s->num_lock_mode == 3) { return; /* Drop first release */ } } } keycode = qcode_to_keycode[qcode]; if (!evt->key->down) { keycode |= 0x80; } trace_escc_sunkbd_event_out(keycode); put_queue(s, keycode); } static QemuInputHandler sunkbd_handler = { .name = "sun keyboard", .mask = INPUT_EVENT_MASK_KEY, .event = sunkbd_handle_event, }; static void handle_kbd_command(ChannelState *s, int val) { trace_escc_kbd_command(val); if (s->led_mode) { // Ignore led byte s->led_mode = 0; return; } switch (val) { case 1: // Reset, return type code clear_queue(s); put_queue(s, 0xff); put_queue(s, 4); // Type 4 put_queue(s, 0x7f); break; case 0xe: // Set leds s->led_mode = 1; break; case 7: // Query layout case 0xf: clear_queue(s); put_queue(s, 0xfe); put_queue(s, 0); // XXX, layout? break; default: break; } } static void sunmouse_event(void *opaque, int dx, int dy, int dz, int buttons_state) { ChannelState *s = opaque; int ch; trace_escc_sunmouse_event(dx, dy, buttons_state); ch = 0x80 | 0x7; /* protocol start byte, no buttons pressed */ if (buttons_state & MOUSE_EVENT_LBUTTON) ch ^= 0x4; if (buttons_state & MOUSE_EVENT_MBUTTON) ch ^= 0x2; if (buttons_state & MOUSE_EVENT_RBUTTON) ch ^= 0x1; put_queue(s, ch); ch = dx; if (ch > 127) ch = 127; else if (ch < -127) ch = -127; put_queue(s, ch & 0xff); ch = -dy; if (ch > 127) ch = 127; else if (ch < -127) ch = -127; put_queue(s, ch & 0xff); // MSC protocol specify two extra motion bytes put_queue(s, 0); put_queue(s, 0); } void slavio_serial_ms_kbd_init(hwaddr base, qemu_irq irq, int disabled, int clock, int it_shift) { DeviceState *dev; SysBusDevice *s; dev = qdev_create(NULL, TYPE_ESCC); qdev_prop_set_uint32(dev, "disabled", disabled); qdev_prop_set_uint32(dev, "frequency", clock); qdev_prop_set_uint32(dev, "it_shift", it_shift); qdev_prop_set_chr(dev, "chrB", NULL); qdev_prop_set_chr(dev, "chrA", NULL); qdev_prop_set_uint32(dev, "chnBtype", mouse); qdev_prop_set_uint32(dev, "chnAtype", kbd); qdev_init_nofail(dev); s = SYS_BUS_DEVICE(dev); sysbus_connect_irq(s, 0, irq); sysbus_connect_irq(s, 1, irq); sysbus_mmio_map(s, 0, base); } static int escc_init1(SysBusDevice *dev) { ESCCState *s = ESCC(dev); unsigned int i; s->chn[0].disabled = s->disabled; s->chn[1].disabled = s->disabled; for (i = 0; i < 2; i++) { sysbus_init_irq(dev, &s->chn[i].irq); s->chn[i].chn = 1 - i; s->chn[i].clock = s->frequency / 2; if (s->chn[i].chr) { qemu_chr_add_handlers(s->chn[i].chr, serial_can_receive, serial_receive1, serial_event, &s->chn[i]); } } s->chn[0].otherchn = &s->chn[1]; s->chn[1].otherchn = &s->chn[0]; memory_region_init_io(&s->mmio, OBJECT(s), &escc_mem_ops, s, "escc", ESCC_SIZE << s->it_shift); sysbus_init_mmio(dev, &s->mmio); if (s->chn[0].type == mouse) { qemu_add_mouse_event_handler(sunmouse_event, &s->chn[0], 0, "QEMU Sun Mouse"); } if (s->chn[1].type == kbd) { s->chn[1].hs = qemu_input_handler_register((DeviceState *)(&s->chn[1]), &sunkbd_handler); } return 0; } static Property escc_properties[] = { DEFINE_PROP_UINT32("frequency", ESCCState, frequency, 0), DEFINE_PROP_UINT32("it_shift", ESCCState, it_shift, 0), DEFINE_PROP_UINT32("disabled", ESCCState, disabled, 0), DEFINE_PROP_UINT32("chnBtype", ESCCState, chn[0].type, 0), DEFINE_PROP_UINT32("chnAtype", ESCCState, chn[1].type, 0), DEFINE_PROP_CHR("chrB", ESCCState, chn[0].chr), DEFINE_PROP_CHR("chrA", ESCCState, chn[1].chr), DEFINE_PROP_END_OF_LIST(), }; static void escc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); k->init = escc_init1; dc->reset = escc_reset; dc->vmsd = &vmstate_escc; dc->props = escc_properties; } static const TypeInfo escc_info = { .name = TYPE_ESCC, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(ESCCState), .class_init = escc_class_init, }; static void escc_register_types(void) { type_register_static(&escc_info); } type_init(escc_register_types)