/* * Virtio Block Device * * Copyright IBM, Corp. 2007 * * Authors: * Anthony Liguori * * This work is licensed under the terms of the GNU GPL, version 2. See * the COPYING file in the top-level directory. * */ #include "qemu/osdep.h" #include "qemu/defer-call.h" #include "qapi/error.h" #include "qemu/iov.h" #include "qemu/module.h" #include "qemu/error-report.h" #include "qemu/main-loop.h" #include "block/block_int.h" #include "trace.h" #include "hw/block/block.h" #include "hw/qdev-properties.h" #include "sysemu/blockdev.h" #include "sysemu/block-ram-registrar.h" #include "sysemu/sysemu.h" #include "sysemu/runstate.h" #include "hw/virtio/virtio-blk.h" #include "dataplane/virtio-blk.h" #include "scsi/constants.h" #ifdef __linux__ # include #endif #include "hw/virtio/virtio-bus.h" #include "migration/qemu-file-types.h" #include "hw/virtio/virtio-access.h" #include "hw/virtio/virtio-blk-common.h" #include "qemu/coroutine.h" static void virtio_blk_init_request(VirtIOBlock *s, VirtQueue *vq, VirtIOBlockReq *req) { req->dev = s; req->vq = vq; req->qiov.size = 0; req->in_len = 0; req->next = NULL; req->mr_next = NULL; } static void virtio_blk_free_request(VirtIOBlockReq *req) { g_free(req); } static void virtio_blk_req_complete(VirtIOBlockReq *req, unsigned char status) { VirtIOBlock *s = req->dev; VirtIODevice *vdev = VIRTIO_DEVICE(s); trace_virtio_blk_req_complete(vdev, req, status); stb_p(&req->in->status, status); iov_discard_undo(&req->inhdr_undo); iov_discard_undo(&req->outhdr_undo); virtqueue_push(req->vq, &req->elem, req->in_len); if (s->dataplane_started && !s->dataplane_disabled) { virtio_blk_data_plane_notify(s->dataplane, req->vq); } else { virtio_notify(vdev, req->vq); } } static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error, bool is_read, bool acct_failed) { VirtIOBlock *s = req->dev; BlockErrorAction action = blk_get_error_action(s->blk, is_read, error); if (action == BLOCK_ERROR_ACTION_STOP) { /* Break the link as the next request is going to be parsed from the * ring again. Otherwise we may end up doing a double completion! */ req->mr_next = NULL; WITH_QEMU_LOCK_GUARD(&s->rq_lock) { req->next = s->rq; s->rq = req; } } else if (action == BLOCK_ERROR_ACTION_REPORT) { virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR); if (acct_failed) { block_acct_failed(blk_get_stats(s->blk), &req->acct); } virtio_blk_free_request(req); } blk_error_action(s->blk, action, is_read, error); return action != BLOCK_ERROR_ACTION_IGNORE; } static void virtio_blk_rw_complete(void *opaque, int ret) { VirtIOBlockReq *next = opaque; VirtIOBlock *s = next->dev; VirtIODevice *vdev = VIRTIO_DEVICE(s); while (next) { VirtIOBlockReq *req = next; next = req->mr_next; trace_virtio_blk_rw_complete(vdev, req, ret); if (req->qiov.nalloc != -1) { /* If nalloc is != -1 req->qiov is a local copy of the original * external iovec. It was allocated in submit_requests to be * able to merge requests. */ qemu_iovec_destroy(&req->qiov); } if (ret) { int p = virtio_ldl_p(VIRTIO_DEVICE(s), &req->out.type); bool is_read = !(p & VIRTIO_BLK_T_OUT); /* Note that memory may be dirtied on read failure. If the * virtio request is not completed here, as is the case for * BLOCK_ERROR_ACTION_STOP, the memory may not be copied * correctly during live migration. While this is ugly, * it is acceptable because the device is free to write to * the memory until the request is completed (which will * happen on the other side of the migration). */ if (virtio_blk_handle_rw_error(req, -ret, is_read, true)) { continue; } } virtio_blk_req_complete(req, VIRTIO_BLK_S_OK); block_acct_done(blk_get_stats(s->blk), &req->acct); virtio_blk_free_request(req); } } static void virtio_blk_flush_complete(void *opaque, int ret) { VirtIOBlockReq *req = opaque; VirtIOBlock *s = req->dev; if (ret && virtio_blk_handle_rw_error(req, -ret, 0, true)) { return; } virtio_blk_req_complete(req, VIRTIO_BLK_S_OK); block_acct_done(blk_get_stats(s->blk), &req->acct); virtio_blk_free_request(req); } static void virtio_blk_discard_write_zeroes_complete(void *opaque, int ret) { VirtIOBlockReq *req = opaque; VirtIOBlock *s = req->dev; bool is_write_zeroes = (virtio_ldl_p(VIRTIO_DEVICE(s), &req->out.type) & ~VIRTIO_BLK_T_BARRIER) == VIRTIO_BLK_T_WRITE_ZEROES; if (ret && virtio_blk_handle_rw_error(req, -ret, false, is_write_zeroes)) { return; } virtio_blk_req_complete(req, VIRTIO_BLK_S_OK); if (is_write_zeroes) { block_acct_done(blk_get_stats(s->blk), &req->acct); } virtio_blk_free_request(req); } #ifdef __linux__ typedef struct { VirtIOBlockReq *req; struct sg_io_hdr hdr; } VirtIOBlockIoctlReq; static void virtio_blk_ioctl_complete(void *opaque, int status) { VirtIOBlockIoctlReq *ioctl_req = opaque; VirtIOBlockReq *req = ioctl_req->req; VirtIOBlock *s = req->dev; VirtIODevice *vdev = VIRTIO_DEVICE(s); struct virtio_scsi_inhdr *scsi; struct sg_io_hdr *hdr; scsi = (void *)req->elem.in_sg[req->elem.in_num - 2].iov_base; if (status) { status = VIRTIO_BLK_S_UNSUPP; virtio_stl_p(vdev, &scsi->errors, 255); goto out; } hdr = &ioctl_req->hdr; /* * From SCSI-Generic-HOWTO: "Some lower level drivers (e.g. ide-scsi) * clear the masked_status field [hence status gets cleared too, see * block/scsi_ioctl.c] even when a CHECK_CONDITION or COMMAND_TERMINATED * status has occurred. However they do set DRIVER_SENSE in driver_status * field. Also a (sb_len_wr > 0) indicates there is a sense buffer. */ if (hdr->status == 0 && hdr->sb_len_wr > 0) { hdr->status = CHECK_CONDITION; } virtio_stl_p(vdev, &scsi->errors, hdr->status | (hdr->msg_status << 8) | (hdr->host_status << 16) | (hdr->driver_status << 24)); virtio_stl_p(vdev, &scsi->residual, hdr->resid); virtio_stl_p(vdev, &scsi->sense_len, hdr->sb_len_wr); virtio_stl_p(vdev, &scsi->data_len, hdr->dxfer_len); out: virtio_blk_req_complete(req, status); virtio_blk_free_request(req); g_free(ioctl_req); } #endif static VirtIOBlockReq *virtio_blk_get_request(VirtIOBlock *s, VirtQueue *vq) { VirtIOBlockReq *req = virtqueue_pop(vq, sizeof(VirtIOBlockReq)); if (req) { virtio_blk_init_request(s, vq, req); } return req; } static int virtio_blk_handle_scsi_req(VirtIOBlockReq *req) { int status = VIRTIO_BLK_S_OK; struct virtio_scsi_inhdr *scsi = NULL; VirtIOBlock *blk = req->dev; VirtIODevice *vdev = VIRTIO_DEVICE(blk); VirtQueueElement *elem = &req->elem; #ifdef __linux__ int i; VirtIOBlockIoctlReq *ioctl_req; BlockAIOCB *acb; #endif /* * We require at least one output segment each for the virtio_blk_outhdr * and the SCSI command block. * * We also at least require the virtio_blk_inhdr, the virtio_scsi_inhdr * and the sense buffer pointer in the input segments. */ if (elem->out_num < 2 || elem->in_num < 3) { status = VIRTIO_BLK_S_IOERR; goto fail; } /* * The scsi inhdr is placed in the second-to-last input segment, just * before the regular inhdr. */ scsi = (void *)elem->in_sg[elem->in_num - 2].iov_base; if (!virtio_has_feature(blk->host_features, VIRTIO_BLK_F_SCSI)) { status = VIRTIO_BLK_S_UNSUPP; goto fail; } /* * No support for bidirection commands yet. */ if (elem->out_num > 2 && elem->in_num > 3) { status = VIRTIO_BLK_S_UNSUPP; goto fail; } #ifdef __linux__ ioctl_req = g_new0(VirtIOBlockIoctlReq, 1); ioctl_req->req = req; ioctl_req->hdr.interface_id = 'S'; ioctl_req->hdr.cmd_len = elem->out_sg[1].iov_len; ioctl_req->hdr.cmdp = elem->out_sg[1].iov_base; ioctl_req->hdr.dxfer_len = 0; if (elem->out_num > 2) { /* * If there are more than the minimally required 2 output segments * there is write payload starting from the third iovec. */ ioctl_req->hdr.dxfer_direction = SG_DXFER_TO_DEV; ioctl_req->hdr.iovec_count = elem->out_num - 2; for (i = 0; i < ioctl_req->hdr.iovec_count; i++) { ioctl_req->hdr.dxfer_len += elem->out_sg[i + 2].iov_len; } ioctl_req->hdr.dxferp = elem->out_sg + 2; } else if (elem->in_num > 3) { /* * If we have more than 3 input segments the guest wants to actually * read data. */ ioctl_req->hdr.dxfer_direction = SG_DXFER_FROM_DEV; ioctl_req->hdr.iovec_count = elem->in_num - 3; for (i = 0; i < ioctl_req->hdr.iovec_count; i++) { ioctl_req->hdr.dxfer_len += elem->in_sg[i].iov_len; } ioctl_req->hdr.dxferp = elem->in_sg; } else { /* * Some SCSI commands don't actually transfer any data. */ ioctl_req->hdr.dxfer_direction = SG_DXFER_NONE; } ioctl_req->hdr.sbp = elem->in_sg[elem->in_num - 3].iov_base; ioctl_req->hdr.mx_sb_len = elem->in_sg[elem->in_num - 3].iov_len; acb = blk_aio_ioctl(blk->blk, SG_IO, &ioctl_req->hdr, virtio_blk_ioctl_complete, ioctl_req); if (!acb) { g_free(ioctl_req); status = VIRTIO_BLK_S_UNSUPP; goto fail; } return -EINPROGRESS; #else abort(); #endif fail: /* Just put anything nonzero so that the ioctl fails in the guest. */ if (scsi) { virtio_stl_p(vdev, &scsi->errors, 255); } return status; } static void virtio_blk_handle_scsi(VirtIOBlockReq *req) { int status; status = virtio_blk_handle_scsi_req(req); if (status != -EINPROGRESS) { virtio_blk_req_complete(req, status); virtio_blk_free_request(req); } } static inline void submit_requests(VirtIOBlock *s, MultiReqBuffer *mrb, int start, int num_reqs, int niov) { BlockBackend *blk = s->blk; QEMUIOVector *qiov = &mrb->reqs[start]->qiov; int64_t sector_num = mrb->reqs[start]->sector_num; bool is_write = mrb->is_write; BdrvRequestFlags flags = 0; if (num_reqs > 1) { int i; struct iovec *tmp_iov = qiov->iov; int tmp_niov = qiov->niov; /* mrb->reqs[start]->qiov was initialized from external so we can't * modify it here. We need to initialize it locally and then add the * external iovecs. */ qemu_iovec_init(qiov, niov); for (i = 0; i < tmp_niov; i++) { qemu_iovec_add(qiov, tmp_iov[i].iov_base, tmp_iov[i].iov_len); } for (i = start + 1; i < start + num_reqs; i++) { qemu_iovec_concat(qiov, &mrb->reqs[i]->qiov, 0, mrb->reqs[i]->qiov.size); mrb->reqs[i - 1]->mr_next = mrb->reqs[i]; } trace_virtio_blk_submit_multireq(VIRTIO_DEVICE(mrb->reqs[start]->dev), mrb, start, num_reqs, sector_num << BDRV_SECTOR_BITS, qiov->size, is_write); block_acct_merge_done(blk_get_stats(blk), is_write ? BLOCK_ACCT_WRITE : BLOCK_ACCT_READ, num_reqs - 1); } if (blk_ram_registrar_ok(&s->blk_ram_registrar)) { flags |= BDRV_REQ_REGISTERED_BUF; } if (is_write) { blk_aio_pwritev(blk, sector_num << BDRV_SECTOR_BITS, qiov, flags, virtio_blk_rw_complete, mrb->reqs[start]); } else { blk_aio_preadv(blk, sector_num << BDRV_SECTOR_BITS, qiov, flags, virtio_blk_rw_complete, mrb->reqs[start]); } } static int multireq_compare(const void *a, const void *b) { const VirtIOBlockReq *req1 = *(VirtIOBlockReq **)a, *req2 = *(VirtIOBlockReq **)b; /* * Note that we can't simply subtract sector_num1 from sector_num2 * here as that could overflow the return value. */ if (req1->sector_num > req2->sector_num) { return 1; } else if (req1->sector_num < req2->sector_num) { return -1; } else { return 0; } } static void virtio_blk_submit_multireq(VirtIOBlock *s, MultiReqBuffer *mrb) { int i = 0, start = 0, num_reqs = 0, niov = 0, nb_sectors = 0; uint32_t max_transfer; int64_t sector_num = 0; if (mrb->num_reqs == 1) { submit_requests(s, mrb, 0, 1, -1); mrb->num_reqs = 0; return; } max_transfer = blk_get_max_transfer(mrb->reqs[0]->dev->blk); qsort(mrb->reqs, mrb->num_reqs, sizeof(*mrb->reqs), &multireq_compare); for (i = 0; i < mrb->num_reqs; i++) { VirtIOBlockReq *req = mrb->reqs[i]; if (num_reqs > 0) { /* * NOTE: We cannot merge the requests in below situations: * 1. requests are not sequential * 2. merge would exceed maximum number of IOVs * 3. merge would exceed maximum transfer length of backend device */ if (sector_num + nb_sectors != req->sector_num || niov > blk_get_max_iov(s->blk) - req->qiov.niov || req->qiov.size > max_transfer || nb_sectors > (max_transfer - req->qiov.size) / BDRV_SECTOR_SIZE) { submit_requests(s, mrb, start, num_reqs, niov); num_reqs = 0; } } if (num_reqs == 0) { sector_num = req->sector_num; nb_sectors = niov = 0; start = i; } nb_sectors += req->qiov.size / BDRV_SECTOR_SIZE; niov += req->qiov.niov; num_reqs++; } submit_requests(s, mrb, start, num_reqs, niov); mrb->num_reqs = 0; } static void virtio_blk_handle_flush(VirtIOBlockReq *req, MultiReqBuffer *mrb) { VirtIOBlock *s = req->dev; block_acct_start(blk_get_stats(s->blk), &req->acct, 0, BLOCK_ACCT_FLUSH); /* * Make sure all outstanding writes are posted to the backing device. */ if (mrb->is_write && mrb->num_reqs > 0) { virtio_blk_submit_multireq(s, mrb); } blk_aio_flush(s->blk, virtio_blk_flush_complete, req); } static bool virtio_blk_sect_range_ok(VirtIOBlock *dev, uint64_t sector, size_t size) { uint64_t nb_sectors = size >> BDRV_SECTOR_BITS; uint64_t total_sectors; if (nb_sectors > BDRV_REQUEST_MAX_SECTORS) { return false; } if (sector & dev->sector_mask) { return false; } if (size % dev->conf.conf.logical_block_size) { return false; } blk_get_geometry(dev->blk, &total_sectors); if (sector > total_sectors || nb_sectors > total_sectors - sector) { return false; } return true; } static uint8_t virtio_blk_handle_discard_write_zeroes(VirtIOBlockReq *req, struct virtio_blk_discard_write_zeroes *dwz_hdr, bool is_write_zeroes) { VirtIOBlock *s = req->dev; VirtIODevice *vdev = VIRTIO_DEVICE(s); uint64_t sector; uint32_t num_sectors, flags, max_sectors; uint8_t err_status; int bytes; sector = virtio_ldq_p(vdev, &dwz_hdr->sector); num_sectors = virtio_ldl_p(vdev, &dwz_hdr->num_sectors); flags = virtio_ldl_p(vdev, &dwz_hdr->flags); max_sectors = is_write_zeroes ? s->conf.max_write_zeroes_sectors : s->conf.max_discard_sectors; /* * max_sectors is at most BDRV_REQUEST_MAX_SECTORS, this check * make us sure that "num_sectors << BDRV_SECTOR_BITS" can fit in * the integer variable. */ if (unlikely(num_sectors > max_sectors)) { err_status = VIRTIO_BLK_S_IOERR; goto err; } bytes = num_sectors << BDRV_SECTOR_BITS; if (unlikely(!virtio_blk_sect_range_ok(s, sector, bytes))) { err_status = VIRTIO_BLK_S_IOERR; goto err; } /* * The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP for discard * and write zeroes commands if any unknown flag is set. */ if (unlikely(flags & ~VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP)) { err_status = VIRTIO_BLK_S_UNSUPP; goto err; } if (is_write_zeroes) { /* VIRTIO_BLK_T_WRITE_ZEROES */ int blk_aio_flags = 0; if (flags & VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP) { blk_aio_flags |= BDRV_REQ_MAY_UNMAP; } block_acct_start(blk_get_stats(s->blk), &req->acct, bytes, BLOCK_ACCT_WRITE); blk_aio_pwrite_zeroes(s->blk, sector << BDRV_SECTOR_BITS, bytes, blk_aio_flags, virtio_blk_discard_write_zeroes_complete, req); } else { /* VIRTIO_BLK_T_DISCARD */ /* * The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP for * discard commands if the unmap flag is set. */ if (unlikely(flags & VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP)) { err_status = VIRTIO_BLK_S_UNSUPP; goto err; } blk_aio_pdiscard(s->blk, sector << BDRV_SECTOR_BITS, bytes, virtio_blk_discard_write_zeroes_complete, req); } return VIRTIO_BLK_S_OK; err: if (is_write_zeroes) { block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_WRITE); } return err_status; } typedef struct ZoneCmdData { VirtIOBlockReq *req; struct iovec *in_iov; unsigned in_num; union { struct { unsigned int nr_zones; BlockZoneDescriptor *zones; } zone_report_data; struct { int64_t offset; } zone_append_data; }; } ZoneCmdData; /* * check zoned_request: error checking before issuing requests. If all checks * passed, return true. * append: true if only zone append requests issued. */ static bool check_zoned_request(VirtIOBlock *s, int64_t offset, int64_t len, bool append, uint8_t *status) { BlockDriverState *bs = blk_bs(s->blk); int index; if (!virtio_has_feature(s->host_features, VIRTIO_BLK_F_ZONED)) { *status = VIRTIO_BLK_S_UNSUPP; return false; } if (offset < 0 || len < 0 || len > (bs->total_sectors << BDRV_SECTOR_BITS) || offset > (bs->total_sectors << BDRV_SECTOR_BITS) - len) { *status = VIRTIO_BLK_S_ZONE_INVALID_CMD; return false; } if (append) { if (bs->bl.write_granularity) { if ((offset % bs->bl.write_granularity) != 0) { *status = VIRTIO_BLK_S_ZONE_UNALIGNED_WP; return false; } } index = offset / bs->bl.zone_size; if (BDRV_ZT_IS_CONV(bs->wps->wp[index])) { *status = VIRTIO_BLK_S_ZONE_INVALID_CMD; return false; } if (len / 512 > bs->bl.max_append_sectors) { if (bs->bl.max_append_sectors == 0) { *status = VIRTIO_BLK_S_UNSUPP; } else { *status = VIRTIO_BLK_S_ZONE_INVALID_CMD; } return false; } } return true; } static void virtio_blk_zone_report_complete(void *opaque, int ret) { ZoneCmdData *data = opaque; VirtIOBlockReq *req = data->req; VirtIODevice *vdev = VIRTIO_DEVICE(req->dev); struct iovec *in_iov = data->in_iov; unsigned in_num = data->in_num; int64_t zrp_size, n, j = 0; int64_t nz = data->zone_report_data.nr_zones; int8_t err_status = VIRTIO_BLK_S_OK; trace_virtio_blk_zone_report_complete(vdev, req, nz, ret); if (ret) { err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; goto out; } struct virtio_blk_zone_report zrp_hdr = (struct virtio_blk_zone_report) { .nr_zones = cpu_to_le64(nz), }; zrp_size = sizeof(struct virtio_blk_zone_report) + sizeof(struct virtio_blk_zone_descriptor) * nz; n = iov_from_buf(in_iov, in_num, 0, &zrp_hdr, sizeof(zrp_hdr)); if (n != sizeof(zrp_hdr)) { virtio_error(vdev, "Driver provided input buffer that is too small!"); err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; goto out; } for (size_t i = sizeof(zrp_hdr); i < zrp_size; i += sizeof(struct virtio_blk_zone_descriptor), ++j) { struct virtio_blk_zone_descriptor desc = (struct virtio_blk_zone_descriptor) { .z_start = cpu_to_le64(data->zone_report_data.zones[j].start >> BDRV_SECTOR_BITS), .z_cap = cpu_to_le64(data->zone_report_data.zones[j].cap >> BDRV_SECTOR_BITS), .z_wp = cpu_to_le64(data->zone_report_data.zones[j].wp >> BDRV_SECTOR_BITS), }; switch (data->zone_report_data.zones[j].type) { case BLK_ZT_CONV: desc.z_type = VIRTIO_BLK_ZT_CONV; break; case BLK_ZT_SWR: desc.z_type = VIRTIO_BLK_ZT_SWR; break; case BLK_ZT_SWP: desc.z_type = VIRTIO_BLK_ZT_SWP; break; default: g_assert_not_reached(); } switch (data->zone_report_data.zones[j].state) { case BLK_ZS_RDONLY: desc.z_state = VIRTIO_BLK_ZS_RDONLY; break; case BLK_ZS_OFFLINE: desc.z_state = VIRTIO_BLK_ZS_OFFLINE; break; case BLK_ZS_EMPTY: desc.z_state = VIRTIO_BLK_ZS_EMPTY; break; case BLK_ZS_CLOSED: desc.z_state = VIRTIO_BLK_ZS_CLOSED; break; case BLK_ZS_FULL: desc.z_state = VIRTIO_BLK_ZS_FULL; break; case BLK_ZS_EOPEN: desc.z_state = VIRTIO_BLK_ZS_EOPEN; break; case BLK_ZS_IOPEN: desc.z_state = VIRTIO_BLK_ZS_IOPEN; break; case BLK_ZS_NOT_WP: desc.z_state = VIRTIO_BLK_ZS_NOT_WP; break; default: g_assert_not_reached(); } /* TODO: it takes O(n^2) time complexity. Optimizations required. */ n = iov_from_buf(in_iov, in_num, i, &desc, sizeof(desc)); if (n != sizeof(desc)) { virtio_error(vdev, "Driver provided input buffer " "for descriptors that is too small!"); err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; } } out: virtio_blk_req_complete(req, err_status); virtio_blk_free_request(req); g_free(data->zone_report_data.zones); g_free(data); } static void virtio_blk_handle_zone_report(VirtIOBlockReq *req, struct iovec *in_iov, unsigned in_num) { VirtIOBlock *s = req->dev; VirtIODevice *vdev = VIRTIO_DEVICE(s); unsigned int nr_zones; ZoneCmdData *data; int64_t zone_size, offset; uint8_t err_status; if (req->in_len < sizeof(struct virtio_blk_inhdr) + sizeof(struct virtio_blk_zone_report) + sizeof(struct virtio_blk_zone_descriptor)) { virtio_error(vdev, "in buffer too small for zone report"); return; } /* start byte offset of the zone report */ offset = virtio_ldq_p(vdev, &req->out.sector) << BDRV_SECTOR_BITS; if (!check_zoned_request(s, offset, 0, false, &err_status)) { goto out; } nr_zones = (req->in_len - sizeof(struct virtio_blk_inhdr) - sizeof(struct virtio_blk_zone_report)) / sizeof(struct virtio_blk_zone_descriptor); trace_virtio_blk_handle_zone_report(vdev, req, offset >> BDRV_SECTOR_BITS, nr_zones); zone_size = sizeof(BlockZoneDescriptor) * nr_zones; data = g_malloc(sizeof(ZoneCmdData)); data->req = req; data->in_iov = in_iov; data->in_num = in_num; data->zone_report_data.nr_zones = nr_zones; data->zone_report_data.zones = g_malloc(zone_size), blk_aio_zone_report(s->blk, offset, &data->zone_report_data.nr_zones, data->zone_report_data.zones, virtio_blk_zone_report_complete, data); return; out: virtio_blk_req_complete(req, err_status); virtio_blk_free_request(req); } static void virtio_blk_zone_mgmt_complete(void *opaque, int ret) { VirtIOBlockReq *req = opaque; VirtIOBlock *s = req->dev; VirtIODevice *vdev = VIRTIO_DEVICE(s); int8_t err_status = VIRTIO_BLK_S_OK; trace_virtio_blk_zone_mgmt_complete(vdev, req,ret); if (ret) { err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; } virtio_blk_req_complete(req, err_status); virtio_blk_free_request(req); } static int virtio_blk_handle_zone_mgmt(VirtIOBlockReq *req, BlockZoneOp op) { VirtIOBlock *s = req->dev; VirtIODevice *vdev = VIRTIO_DEVICE(s); BlockDriverState *bs = blk_bs(s->blk); int64_t offset = virtio_ldq_p(vdev, &req->out.sector) << BDRV_SECTOR_BITS; uint64_t len; uint64_t capacity = bs->total_sectors << BDRV_SECTOR_BITS; uint8_t err_status = VIRTIO_BLK_S_OK; uint32_t type = virtio_ldl_p(vdev, &req->out.type); if (type == VIRTIO_BLK_T_ZONE_RESET_ALL) { /* Entire drive capacity */ offset = 0; len = capacity; trace_virtio_blk_handle_zone_reset_all(vdev, req, 0, bs->total_sectors); } else { if (bs->bl.zone_size > capacity - offset) { /* The zoned device allows the last smaller zone. */ len = capacity - bs->bl.zone_size * (bs->bl.nr_zones - 1); } else { len = bs->bl.zone_size; } trace_virtio_blk_handle_zone_mgmt(vdev, req, op, offset >> BDRV_SECTOR_BITS, len >> BDRV_SECTOR_BITS); } if (!check_zoned_request(s, offset, len, false, &err_status)) { goto out; } blk_aio_zone_mgmt(s->blk, op, offset, len, virtio_blk_zone_mgmt_complete, req); return 0; out: virtio_blk_req_complete(req, err_status); virtio_blk_free_request(req); return err_status; } static void virtio_blk_zone_append_complete(void *opaque, int ret) { ZoneCmdData *data = opaque; VirtIOBlockReq *req = data->req; VirtIODevice *vdev = VIRTIO_DEVICE(req->dev); int64_t append_sector, n; uint8_t err_status = VIRTIO_BLK_S_OK; if (ret) { err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; goto out; } virtio_stq_p(vdev, &append_sector, data->zone_append_data.offset >> BDRV_SECTOR_BITS); n = iov_from_buf(data->in_iov, data->in_num, 0, &append_sector, sizeof(append_sector)); if (n != sizeof(append_sector)) { virtio_error(vdev, "Driver provided input buffer less than size of " "append_sector"); err_status = VIRTIO_BLK_S_ZONE_INVALID_CMD; goto out; } trace_virtio_blk_zone_append_complete(vdev, req, append_sector, ret); out: virtio_blk_req_complete(req, err_status); virtio_blk_free_request(req); g_free(data); } static int virtio_blk_handle_zone_append(VirtIOBlockReq *req, struct iovec *out_iov, struct iovec *in_iov, uint64_t out_num, unsigned in_num) { VirtIOBlock *s = req->dev; VirtIODevice *vdev = VIRTIO_DEVICE(s); uint8_t err_status = VIRTIO_BLK_S_OK; int64_t offset = virtio_ldq_p(vdev, &req->out.sector) << BDRV_SECTOR_BITS; int64_t len = iov_size(out_iov, out_num); trace_virtio_blk_handle_zone_append(vdev, req, offset >> BDRV_SECTOR_BITS); if (!check_zoned_request(s, offset, len, true, &err_status)) { goto out; } ZoneCmdData *data = g_malloc(sizeof(ZoneCmdData)); data->req = req; data->in_iov = in_iov; data->in_num = in_num; data->zone_append_data.offset = offset; qemu_iovec_init_external(&req->qiov, out_iov, out_num); block_acct_start(blk_get_stats(s->blk), &req->acct, len, BLOCK_ACCT_ZONE_APPEND); blk_aio_zone_append(s->blk, &data->zone_append_data.offset, &req->qiov, 0, virtio_blk_zone_append_complete, data); return 0; out: virtio_blk_req_complete(req, err_status); virtio_blk_free_request(req); return err_status; } static int virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb) { uint32_t type; struct iovec *in_iov = req->elem.in_sg; struct iovec *out_iov = req->elem.out_sg; unsigned in_num = req->elem.in_num; unsigned out_num = req->elem.out_num; VirtIOBlock *s = req->dev; VirtIODevice *vdev = VIRTIO_DEVICE(s); if (req->elem.out_num < 1 || req->elem.in_num < 1) { virtio_error(vdev, "virtio-blk missing headers"); return -1; } if (unlikely(iov_to_buf(out_iov, out_num, 0, &req->out, sizeof(req->out)) != sizeof(req->out))) { virtio_error(vdev, "virtio-blk request outhdr too short"); return -1; } iov_discard_front_undoable(&out_iov, &out_num, sizeof(req->out), &req->outhdr_undo); if (in_iov[in_num - 1].iov_len < sizeof(struct virtio_blk_inhdr)) { virtio_error(vdev, "virtio-blk request inhdr too short"); iov_discard_undo(&req->outhdr_undo); return -1; } /* We always touch the last byte, so just see how big in_iov is. */ req->in_len = iov_size(in_iov, in_num); req->in = (void *)in_iov[in_num - 1].iov_base + in_iov[in_num - 1].iov_len - sizeof(struct virtio_blk_inhdr); iov_discard_back_undoable(in_iov, &in_num, sizeof(struct virtio_blk_inhdr), &req->inhdr_undo); type = virtio_ldl_p(vdev, &req->out.type); /* VIRTIO_BLK_T_OUT defines the command direction. VIRTIO_BLK_T_BARRIER * is an optional flag. Although a guest should not send this flag if * not negotiated we ignored it in the past. So keep ignoring it. */ switch (type & ~(VIRTIO_BLK_T_OUT | VIRTIO_BLK_T_BARRIER)) { case VIRTIO_BLK_T_IN: { bool is_write = type & VIRTIO_BLK_T_OUT; req->sector_num = virtio_ldq_p(vdev, &req->out.sector); if (is_write) { qemu_iovec_init_external(&req->qiov, out_iov, out_num); trace_virtio_blk_handle_write(vdev, req, req->sector_num, req->qiov.size / BDRV_SECTOR_SIZE); } else { qemu_iovec_init_external(&req->qiov, in_iov, in_num); trace_virtio_blk_handle_read(vdev, req, req->sector_num, req->qiov.size / BDRV_SECTOR_SIZE); } if (!virtio_blk_sect_range_ok(s, req->sector_num, req->qiov.size)) { virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR); block_acct_invalid(blk_get_stats(s->blk), is_write ? BLOCK_ACCT_WRITE : BLOCK_ACCT_READ); virtio_blk_free_request(req); return 0; } block_acct_start(blk_get_stats(s->blk), &req->acct, req->qiov.size, is_write ? BLOCK_ACCT_WRITE : BLOCK_ACCT_READ); /* merge would exceed maximum number of requests or IO direction * changes */ if (mrb->num_reqs > 0 && (mrb->num_reqs == VIRTIO_BLK_MAX_MERGE_REQS || is_write != mrb->is_write || !s->conf.request_merging)) { virtio_blk_submit_multireq(s, mrb); } assert(mrb->num_reqs < VIRTIO_BLK_MAX_MERGE_REQS); mrb->reqs[mrb->num_reqs++] = req; mrb->is_write = is_write; break; } case VIRTIO_BLK_T_FLUSH: virtio_blk_handle_flush(req, mrb); break; case VIRTIO_BLK_T_ZONE_REPORT: virtio_blk_handle_zone_report(req, in_iov, in_num); break; case VIRTIO_BLK_T_ZONE_OPEN: virtio_blk_handle_zone_mgmt(req, BLK_ZO_OPEN); break; case VIRTIO_BLK_T_ZONE_CLOSE: virtio_blk_handle_zone_mgmt(req, BLK_ZO_CLOSE); break; case VIRTIO_BLK_T_ZONE_FINISH: virtio_blk_handle_zone_mgmt(req, BLK_ZO_FINISH); break; case VIRTIO_BLK_T_ZONE_RESET: virtio_blk_handle_zone_mgmt(req, BLK_ZO_RESET); break; case VIRTIO_BLK_T_ZONE_RESET_ALL: virtio_blk_handle_zone_mgmt(req, BLK_ZO_RESET); break; case VIRTIO_BLK_T_SCSI_CMD: virtio_blk_handle_scsi(req); break; case VIRTIO_BLK_T_GET_ID: { /* * NB: per existing s/n string convention the string is * terminated by '\0' only when shorter than buffer. */ const char *serial = s->conf.serial ? s->conf.serial : ""; size_t size = MIN(strlen(serial) + 1, MIN(iov_size(in_iov, in_num), VIRTIO_BLK_ID_BYTES)); iov_from_buf(in_iov, in_num, 0, serial, size); virtio_blk_req_complete(req, VIRTIO_BLK_S_OK); virtio_blk_free_request(req); break; } case VIRTIO_BLK_T_ZONE_APPEND & ~VIRTIO_BLK_T_OUT: /* * Passing out_iov/out_num and in_iov/in_num is not safe * to access req->elem.out_sg directly because it may be * modified by virtio_blk_handle_request(). */ virtio_blk_handle_zone_append(req, out_iov, in_iov, out_num, in_num); break; /* * VIRTIO_BLK_T_DISCARD and VIRTIO_BLK_T_WRITE_ZEROES are defined with * VIRTIO_BLK_T_OUT flag set. We masked this flag in the switch statement, * so we must mask it for these requests, then we will check if it is set. */ case VIRTIO_BLK_T_DISCARD & ~VIRTIO_BLK_T_OUT: case VIRTIO_BLK_T_WRITE_ZEROES & ~VIRTIO_BLK_T_OUT: { struct virtio_blk_discard_write_zeroes dwz_hdr; size_t out_len = iov_size(out_iov, out_num); bool is_write_zeroes = (type & ~VIRTIO_BLK_T_BARRIER) == VIRTIO_BLK_T_WRITE_ZEROES; uint8_t err_status; /* * Unsupported if VIRTIO_BLK_T_OUT is not set or the request contains * more than one segment. */ if (unlikely(!(type & VIRTIO_BLK_T_OUT) || out_len > sizeof(dwz_hdr))) { virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP); virtio_blk_free_request(req); return 0; } if (unlikely(iov_to_buf(out_iov, out_num, 0, &dwz_hdr, sizeof(dwz_hdr)) != sizeof(dwz_hdr))) { iov_discard_undo(&req->inhdr_undo); iov_discard_undo(&req->outhdr_undo); virtio_error(vdev, "virtio-blk discard/write_zeroes header" " too short"); return -1; } err_status = virtio_blk_handle_discard_write_zeroes(req, &dwz_hdr, is_write_zeroes); if (err_status != VIRTIO_BLK_S_OK) { virtio_blk_req_complete(req, err_status); virtio_blk_free_request(req); } break; } default: virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP); virtio_blk_free_request(req); } return 0; } void virtio_blk_handle_vq(VirtIOBlock *s, VirtQueue *vq) { VirtIOBlockReq *req; MultiReqBuffer mrb = {}; bool suppress_notifications = virtio_queue_get_notification(vq); defer_call_begin(); do { if (suppress_notifications) { virtio_queue_set_notification(vq, 0); } while ((req = virtio_blk_get_request(s, vq))) { if (virtio_blk_handle_request(req, &mrb)) { virtqueue_detach_element(req->vq, &req->elem, 0); virtio_blk_free_request(req); break; } } if (suppress_notifications) { virtio_queue_set_notification(vq, 1); } } while (!virtio_queue_empty(vq)); if (mrb.num_reqs) { virtio_blk_submit_multireq(s, &mrb); } defer_call_end(); } static void virtio_blk_handle_output(VirtIODevice *vdev, VirtQueue *vq) { VirtIOBlock *s = (VirtIOBlock *)vdev; if (s->dataplane && !s->dataplane_started) { /* Some guests kick before setting VIRTIO_CONFIG_S_DRIVER_OK so start * dataplane here instead of waiting for .set_status(). */ virtio_device_start_ioeventfd(vdev); if (!s->dataplane_disabled) { return; } } virtio_blk_handle_vq(s, vq); } static void virtio_blk_dma_restart_bh(void *opaque) { VirtIOBlock *s = opaque; VirtIOBlockReq *req; MultiReqBuffer mrb = {}; WITH_QEMU_LOCK_GUARD(&s->rq_lock) { req = s->rq; s->rq = NULL; } while (req) { VirtIOBlockReq *next = req->next; if (virtio_blk_handle_request(req, &mrb)) { /* Device is now broken and won't do any processing until it gets * reset. Already queued requests will be lost: let's purge them. */ while (req) { next = req->next; virtqueue_detach_element(req->vq, &req->elem, 0); virtio_blk_free_request(req); req = next; } break; } req = next; } if (mrb.num_reqs) { virtio_blk_submit_multireq(s, &mrb); } /* Paired with inc in virtio_blk_dma_restart_cb() */ blk_dec_in_flight(s->conf.conf.blk); } static void virtio_blk_dma_restart_cb(void *opaque, bool running, RunState state) { VirtIOBlock *s = opaque; if (!running) { return; } /* Paired with dec in virtio_blk_dma_restart_bh() */ blk_inc_in_flight(s->conf.conf.blk); aio_bh_schedule_oneshot(blk_get_aio_context(s->conf.conf.blk), virtio_blk_dma_restart_bh, s); } static void virtio_blk_reset(VirtIODevice *vdev) { VirtIOBlock *s = VIRTIO_BLK(vdev); VirtIOBlockReq *req; /* Dataplane has stopped... */ assert(!s->dataplane_started); /* ...but requests may still be in flight. */ blk_drain(s->blk); /* We drop queued requests after blk_drain() because blk_drain() itself can * produce them. */ WITH_QEMU_LOCK_GUARD(&s->rq_lock) { while (s->rq) { req = s->rq; s->rq = req->next; /* No other threads can access req->vq here */ virtqueue_detach_element(req->vq, &req->elem, 0); virtio_blk_free_request(req); } } blk_set_enable_write_cache(s->blk, s->original_wce); } /* coalesce internal state, copy to pci i/o region 0 */ static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config) { VirtIOBlock *s = VIRTIO_BLK(vdev); BlockConf *conf = &s->conf.conf; BlockDriverState *bs = blk_bs(s->blk); struct virtio_blk_config blkcfg; uint64_t capacity; int64_t length; int blk_size = conf->logical_block_size; blk_get_geometry(s->blk, &capacity); memset(&blkcfg, 0, sizeof(blkcfg)); virtio_stq_p(vdev, &blkcfg.capacity, capacity); virtio_stl_p(vdev, &blkcfg.seg_max, s->conf.seg_max_adjust ? s->conf.queue_size - 2 : 128 - 2); virtio_stw_p(vdev, &blkcfg.geometry.cylinders, conf->cyls); virtio_stl_p(vdev, &blkcfg.blk_size, blk_size); virtio_stw_p(vdev, &blkcfg.min_io_size, conf->min_io_size / blk_size); virtio_stl_p(vdev, &blkcfg.opt_io_size, conf->opt_io_size / blk_size); blkcfg.geometry.heads = conf->heads; /* * We must ensure that the block device capacity is a multiple of * the logical block size. If that is not the case, let's use * sector_mask to adopt the geometry to have a correct picture. * For those devices where the capacity is ok for the given geometry * we don't touch the sector value of the geometry, since some devices * (like s390 dasd) need a specific value. Here the capacity is already * cyls*heads*secs*blk_size and the sector value is not block size * divided by 512 - instead it is the amount of blk_size blocks * per track (cylinder). */ length = blk_getlength(s->blk); if (length > 0 && length / conf->heads / conf->secs % blk_size) { blkcfg.geometry.sectors = conf->secs & ~s->sector_mask; } else { blkcfg.geometry.sectors = conf->secs; } blkcfg.size_max = 0; blkcfg.physical_block_exp = get_physical_block_exp(conf); blkcfg.alignment_offset = 0; blkcfg.wce = blk_enable_write_cache(s->blk); virtio_stw_p(vdev, &blkcfg.num_queues, s->conf.num_queues); if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_DISCARD)) { uint32_t discard_granularity = conf->discard_granularity; if (discard_granularity == -1 || !s->conf.report_discard_granularity) { discard_granularity = blk_size; } virtio_stl_p(vdev, &blkcfg.max_discard_sectors, s->conf.max_discard_sectors); virtio_stl_p(vdev, &blkcfg.discard_sector_alignment, discard_granularity >> BDRV_SECTOR_BITS); /* * We support only one segment per request since multiple segments * are not widely used and there are no userspace APIs that allow * applications to submit multiple segments in a single call. */ virtio_stl_p(vdev, &blkcfg.max_discard_seg, 1); } if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_WRITE_ZEROES)) { virtio_stl_p(vdev, &blkcfg.max_write_zeroes_sectors, s->conf.max_write_zeroes_sectors); blkcfg.write_zeroes_may_unmap = 1; virtio_stl_p(vdev, &blkcfg.max_write_zeroes_seg, 1); } if (bs->bl.zoned != BLK_Z_NONE) { switch (bs->bl.zoned) { case BLK_Z_HM: blkcfg.zoned.model = VIRTIO_BLK_Z_HM; break; case BLK_Z_HA: blkcfg.zoned.model = VIRTIO_BLK_Z_HA; break; default: g_assert_not_reached(); } virtio_stl_p(vdev, &blkcfg.zoned.zone_sectors, bs->bl.zone_size / 512); virtio_stl_p(vdev, &blkcfg.zoned.max_active_zones, bs->bl.max_active_zones); virtio_stl_p(vdev, &blkcfg.zoned.max_open_zones, bs->bl.max_open_zones); virtio_stl_p(vdev, &blkcfg.zoned.write_granularity, blk_size); virtio_stl_p(vdev, &blkcfg.zoned.max_append_sectors, bs->bl.max_append_sectors); } else { blkcfg.zoned.model = VIRTIO_BLK_Z_NONE; } memcpy(config, &blkcfg, s->config_size); } static void virtio_blk_set_config(VirtIODevice *vdev, const uint8_t *config) { VirtIOBlock *s = VIRTIO_BLK(vdev); struct virtio_blk_config blkcfg; memcpy(&blkcfg, config, s->config_size); blk_set_enable_write_cache(s->blk, blkcfg.wce != 0); } static uint64_t virtio_blk_get_features(VirtIODevice *vdev, uint64_t features, Error **errp) { VirtIOBlock *s = VIRTIO_BLK(vdev); /* Firstly sync all virtio-blk possible supported features */ features |= s->host_features; virtio_add_feature(&features, VIRTIO_BLK_F_SEG_MAX); virtio_add_feature(&features, VIRTIO_BLK_F_GEOMETRY); virtio_add_feature(&features, VIRTIO_BLK_F_TOPOLOGY); virtio_add_feature(&features, VIRTIO_BLK_F_BLK_SIZE); if (virtio_has_feature(features, VIRTIO_F_VERSION_1)) { if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_SCSI)) { error_setg(errp, "Please set scsi=off for virtio-blk devices in order to use virtio 1.0"); return 0; } } else { virtio_clear_feature(&features, VIRTIO_F_ANY_LAYOUT); virtio_add_feature(&features, VIRTIO_BLK_F_SCSI); } if (blk_enable_write_cache(s->blk) || (s->conf.x_enable_wce_if_config_wce && virtio_has_feature(features, VIRTIO_BLK_F_CONFIG_WCE))) { virtio_add_feature(&features, VIRTIO_BLK_F_WCE); } if (!blk_is_writable(s->blk)) { virtio_add_feature(&features, VIRTIO_BLK_F_RO); } if (s->conf.num_queues > 1) { virtio_add_feature(&features, VIRTIO_BLK_F_MQ); } return features; } static void virtio_blk_set_status(VirtIODevice *vdev, uint8_t status) { VirtIOBlock *s = VIRTIO_BLK(vdev); if (!(status & (VIRTIO_CONFIG_S_DRIVER | VIRTIO_CONFIG_S_DRIVER_OK))) { assert(!s->dataplane_started); } if (!(status & VIRTIO_CONFIG_S_DRIVER_OK)) { return; } /* A guest that supports VIRTIO_BLK_F_CONFIG_WCE must be able to send * cache flushes. Thus, the "auto writethrough" behavior is never * necessary for guests that support the VIRTIO_BLK_F_CONFIG_WCE feature. * Leaving it enabled would break the following sequence: * * Guest started with "-drive cache=writethrough" * Guest sets status to 0 * Guest sets DRIVER bit in status field * Guest reads host features (WCE=0, CONFIG_WCE=1) * Guest writes guest features (WCE=0, CONFIG_WCE=1) * Guest writes 1 to the WCE configuration field (writeback mode) * Guest sets DRIVER_OK bit in status field * * s->blk would erroneously be placed in writethrough mode. */ if (!virtio_vdev_has_feature(vdev, VIRTIO_BLK_F_CONFIG_WCE)) { blk_set_enable_write_cache(s->blk, virtio_vdev_has_feature(vdev, VIRTIO_BLK_F_WCE)); } } static void virtio_blk_save_device(VirtIODevice *vdev, QEMUFile *f) { VirtIOBlock *s = VIRTIO_BLK(vdev); WITH_QEMU_LOCK_GUARD(&s->rq_lock) { VirtIOBlockReq *req = s->rq; while (req) { qemu_put_sbyte(f, 1); if (s->conf.num_queues > 1) { qemu_put_be32(f, virtio_get_queue_index(req->vq)); } qemu_put_virtqueue_element(vdev, f, &req->elem); req = req->next; } } qemu_put_sbyte(f, 0); } static int virtio_blk_load_device(VirtIODevice *vdev, QEMUFile *f, int version_id) { VirtIOBlock *s = VIRTIO_BLK(vdev); while (qemu_get_sbyte(f)) { unsigned nvqs = s->conf.num_queues; unsigned vq_idx = 0; VirtIOBlockReq *req; if (nvqs > 1) { vq_idx = qemu_get_be32(f); if (vq_idx >= nvqs) { error_report("Invalid virtqueue index in request list: %#x", vq_idx); return -EINVAL; } } req = qemu_get_virtqueue_element(vdev, f, sizeof(VirtIOBlockReq)); virtio_blk_init_request(s, virtio_get_queue(vdev, vq_idx), req); WITH_QEMU_LOCK_GUARD(&s->rq_lock) { req->next = s->rq; s->rq = req; } } return 0; } static bool validate_iothread_vq_mapping_list(IOThreadVirtQueueMappingList *list, uint16_t num_queues, Error **errp) { g_autofree unsigned long *vqs = bitmap_new(num_queues); g_autoptr(GHashTable) iothreads = g_hash_table_new(g_str_hash, g_str_equal); for (IOThreadVirtQueueMappingList *node = list; node; node = node->next) { const char *name = node->value->iothread; uint16List *vq; if (!iothread_by_id(name)) { error_setg(errp, "IOThread \"%s\" object does not exist", name); return false; } if (!g_hash_table_add(iothreads, (gpointer)name)) { error_setg(errp, "duplicate IOThread name \"%s\" in iothread-vq-mapping", name); return false; } if (node != list) { if (!!node->value->vqs != !!list->value->vqs) { error_setg(errp, "either all items in iothread-vq-mapping " "must have vqs or none of them must have it"); return false; } } for (vq = node->value->vqs; vq; vq = vq->next) { if (vq->value >= num_queues) { error_setg(errp, "vq index %u for IOThread \"%s\" must be " "less than num_queues %u in iothread-vq-mapping", vq->value, name, num_queues); return false; } if (test_and_set_bit(vq->value, vqs)) { error_setg(errp, "cannot assign vq %u to IOThread \"%s\" " "because it is already assigned", vq->value, name); return false; } } } if (list->value->vqs) { for (uint16_t i = 0; i < num_queues; i++) { if (!test_bit(i, vqs)) { error_setg(errp, "missing vq %u IOThread assignment in iothread-vq-mapping", i); return false; } } } return true; } static void virtio_resize_cb(void *opaque) { VirtIODevice *vdev = opaque; assert(qemu_get_current_aio_context() == qemu_get_aio_context()); virtio_notify_config(vdev); } static void virtio_blk_resize(void *opaque) { VirtIODevice *vdev = VIRTIO_DEVICE(opaque); /* * virtio_notify_config() needs to acquire the global mutex, * so it can't be called from an iothread. Instead, schedule * it to be run in the main context BH. */ aio_bh_schedule_oneshot(qemu_get_aio_context(), virtio_resize_cb, vdev); } /* Suspend virtqueue ioeventfd processing during drain */ static void virtio_blk_drained_begin(void *opaque) { VirtIOBlock *s = opaque; if (!s->dataplane || !s->dataplane_started) { return; } virtio_blk_data_plane_detach(s->dataplane); } /* Resume virtqueue ioeventfd processing after drain */ static void virtio_blk_drained_end(void *opaque) { VirtIOBlock *s = opaque; if (!s->dataplane || !s->dataplane_started) { return; } virtio_blk_data_plane_attach(s->dataplane); } static const BlockDevOps virtio_block_ops = { .resize_cb = virtio_blk_resize, .drained_begin = virtio_blk_drained_begin, .drained_end = virtio_blk_drained_end, }; static void virtio_blk_device_realize(DeviceState *dev, Error **errp) { VirtIODevice *vdev = VIRTIO_DEVICE(dev); VirtIOBlock *s = VIRTIO_BLK(dev); VirtIOBlkConf *conf = &s->conf; Error *err = NULL; unsigned i; if (!conf->conf.blk) { error_setg(errp, "drive property not set"); return; } if (!blk_is_inserted(conf->conf.blk)) { error_setg(errp, "Device needs media, but drive is empty"); return; } if (conf->num_queues == VIRTIO_BLK_AUTO_NUM_QUEUES) { conf->num_queues = 1; } if (!conf->num_queues) { error_setg(errp, "num-queues property must be larger than 0"); return; } if (conf->queue_size <= 2) { error_setg(errp, "invalid queue-size property (%" PRIu16 "), " "must be > 2", conf->queue_size); return; } if (!is_power_of_2(conf->queue_size) || conf->queue_size > VIRTQUEUE_MAX_SIZE) { error_setg(errp, "invalid queue-size property (%" PRIu16 "), " "must be a power of 2 (max %d)", conf->queue_size, VIRTQUEUE_MAX_SIZE); return; } if (!blkconf_apply_backend_options(&conf->conf, !blk_supports_write_perm(conf->conf.blk), true, errp)) { return; } s->original_wce = blk_enable_write_cache(conf->conf.blk); if (!blkconf_geometry(&conf->conf, NULL, 65535, 255, 255, errp)) { return; } if (!blkconf_blocksizes(&conf->conf, errp)) { return; } BlockDriverState *bs = blk_bs(conf->conf.blk); if (bs->bl.zoned != BLK_Z_NONE) { virtio_add_feature(&s->host_features, VIRTIO_BLK_F_ZONED); if (bs->bl.zoned == BLK_Z_HM) { virtio_clear_feature(&s->host_features, VIRTIO_BLK_F_DISCARD); } } if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_DISCARD) && (!conf->max_discard_sectors || conf->max_discard_sectors > BDRV_REQUEST_MAX_SECTORS)) { error_setg(errp, "invalid max-discard-sectors property (%" PRIu32 ")" ", must be between 1 and %d", conf->max_discard_sectors, (int)BDRV_REQUEST_MAX_SECTORS); return; } if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_WRITE_ZEROES) && (!conf->max_write_zeroes_sectors || conf->max_write_zeroes_sectors > BDRV_REQUEST_MAX_SECTORS)) { error_setg(errp, "invalid max-write-zeroes-sectors property (%" PRIu32 "), must be between 1 and %d", conf->max_write_zeroes_sectors, (int)BDRV_REQUEST_MAX_SECTORS); return; } if (conf->iothread_vq_mapping_list) { if (conf->iothread) { error_setg(errp, "iothread and iothread-vq-mapping properties " "cannot be set at the same time"); return; } if (!validate_iothread_vq_mapping_list(conf->iothread_vq_mapping_list, conf->num_queues, errp)) { return; } } s->config_size = virtio_get_config_size(&virtio_blk_cfg_size_params, s->host_features); virtio_init(vdev, VIRTIO_ID_BLOCK, s->config_size); qemu_mutex_init(&s->rq_lock); s->blk = conf->conf.blk; s->rq = NULL; s->sector_mask = (s->conf.conf.logical_block_size / BDRV_SECTOR_SIZE) - 1; for (i = 0; i < conf->num_queues; i++) { virtio_add_queue(vdev, conf->queue_size, virtio_blk_handle_output); } qemu_coroutine_inc_pool_size(conf->num_queues * conf->queue_size / 2); virtio_blk_data_plane_create(vdev, conf, &s->dataplane, &err); if (err != NULL) { error_propagate(errp, err); for (i = 0; i < conf->num_queues; i++) { virtio_del_queue(vdev, i); } virtio_cleanup(vdev); return; } /* * This must be after virtio_init() so virtio_blk_dma_restart_cb() gets * called after ->start_ioeventfd() has already set blk's AioContext. */ s->change = qdev_add_vm_change_state_handler(dev, virtio_blk_dma_restart_cb, s); blk_ram_registrar_init(&s->blk_ram_registrar, s->blk); blk_set_dev_ops(s->blk, &virtio_block_ops, s); blk_iostatus_enable(s->blk); add_boot_device_lchs(dev, "/disk@0,0", conf->conf.lcyls, conf->conf.lheads, conf->conf.lsecs); } static void virtio_blk_device_unrealize(DeviceState *dev) { VirtIODevice *vdev = VIRTIO_DEVICE(dev); VirtIOBlock *s = VIRTIO_BLK(dev); VirtIOBlkConf *conf = &s->conf; unsigned i; blk_drain(s->blk); del_boot_device_lchs(dev, "/disk@0,0"); virtio_blk_data_plane_destroy(s->dataplane); s->dataplane = NULL; for (i = 0; i < conf->num_queues; i++) { virtio_del_queue(vdev, i); } qemu_coroutine_dec_pool_size(conf->num_queues * conf->queue_size / 2); qemu_mutex_destroy(&s->rq_lock); blk_ram_registrar_destroy(&s->blk_ram_registrar); qemu_del_vm_change_state_handler(s->change); blockdev_mark_auto_del(s->blk); virtio_cleanup(vdev); } static void virtio_blk_instance_init(Object *obj) { VirtIOBlock *s = VIRTIO_BLK(obj); device_add_bootindex_property(obj, &s->conf.conf.bootindex, "bootindex", "/disk@0,0", DEVICE(obj)); } static const VMStateDescription vmstate_virtio_blk = { .name = "virtio-blk", .minimum_version_id = 2, .version_id = 2, .fields = (VMStateField[]) { VMSTATE_VIRTIO_DEVICE, VMSTATE_END_OF_LIST() }, }; static Property virtio_blk_properties[] = { DEFINE_BLOCK_PROPERTIES(VirtIOBlock, conf.conf), DEFINE_BLOCK_ERROR_PROPERTIES(VirtIOBlock, conf.conf), DEFINE_BLOCK_CHS_PROPERTIES(VirtIOBlock, conf.conf), DEFINE_PROP_STRING("serial", VirtIOBlock, conf.serial), DEFINE_PROP_BIT64("config-wce", VirtIOBlock, host_features, VIRTIO_BLK_F_CONFIG_WCE, true), #ifdef __linux__ DEFINE_PROP_BIT64("scsi", VirtIOBlock, host_features, VIRTIO_BLK_F_SCSI, false), #endif DEFINE_PROP_BIT("request-merging", VirtIOBlock, conf.request_merging, 0, true), DEFINE_PROP_UINT16("num-queues", VirtIOBlock, conf.num_queues, VIRTIO_BLK_AUTO_NUM_QUEUES), DEFINE_PROP_UINT16("queue-size", VirtIOBlock, conf.queue_size, 256), DEFINE_PROP_BOOL("seg-max-adjust", VirtIOBlock, conf.seg_max_adjust, true), DEFINE_PROP_LINK("iothread", VirtIOBlock, conf.iothread, TYPE_IOTHREAD, IOThread *), DEFINE_PROP_IOTHREAD_VQ_MAPPING_LIST("iothread-vq-mapping", VirtIOBlock, conf.iothread_vq_mapping_list), DEFINE_PROP_BIT64("discard", VirtIOBlock, host_features, VIRTIO_BLK_F_DISCARD, true), DEFINE_PROP_BOOL("report-discard-granularity", VirtIOBlock, conf.report_discard_granularity, true), DEFINE_PROP_BIT64("write-zeroes", VirtIOBlock, host_features, VIRTIO_BLK_F_WRITE_ZEROES, true), DEFINE_PROP_UINT32("max-discard-sectors", VirtIOBlock, conf.max_discard_sectors, BDRV_REQUEST_MAX_SECTORS), DEFINE_PROP_UINT32("max-write-zeroes-sectors", VirtIOBlock, conf.max_write_zeroes_sectors, BDRV_REQUEST_MAX_SECTORS), DEFINE_PROP_BOOL("x-enable-wce-if-config-wce", VirtIOBlock, conf.x_enable_wce_if_config_wce, true), DEFINE_PROP_END_OF_LIST(), }; static void virtio_blk_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass); device_class_set_props(dc, virtio_blk_properties); dc->vmsd = &vmstate_virtio_blk; set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); vdc->realize = virtio_blk_device_realize; vdc->unrealize = virtio_blk_device_unrealize; vdc->get_config = virtio_blk_update_config; vdc->set_config = virtio_blk_set_config; vdc->get_features = virtio_blk_get_features; vdc->set_status = virtio_blk_set_status; vdc->reset = virtio_blk_reset; vdc->save = virtio_blk_save_device; vdc->load = virtio_blk_load_device; vdc->start_ioeventfd = virtio_blk_data_plane_start; vdc->stop_ioeventfd = virtio_blk_data_plane_stop; } static const TypeInfo virtio_blk_info = { .name = TYPE_VIRTIO_BLK, .parent = TYPE_VIRTIO_DEVICE, .instance_size = sizeof(VirtIOBlock), .instance_init = virtio_blk_instance_init, .class_init = virtio_blk_class_init, }; static void virtio_register_types(void) { type_register_static(&virtio_blk_info); } type_init(virtio_register_types)