/* * ARM RealView Baseboard System emulation. * * Copyright (c) 2006-2007 CodeSourcery. * Written by Paul Brook * * This code is licensed under the GPL. */ #include "qemu/osdep.h" #include "qapi/error.h" #include "cpu.h" #include "hw/sysbus.h" #include "hw/arm/boot.h" #include "hw/arm/primecell.h" #include "hw/core/split-irq.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" #include "hw/pci/pci.h" #include "hw/qdev-core.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/boards.h" #include "hw/i2c/i2c.h" #include "qemu/error-report.h" #include "hw/char/pl011.h" #include "hw/cpu/a9mpcore.h" #include "hw/intc/realview_gic.h" #include "hw/irq.h" #include "hw/i2c/arm_sbcon_i2c.h" #include "hw/sd/sd.h" #include "audio/audio.h" #include "target/arm/cpu-qom.h" #define SMP_BOOT_ADDR 0xe0000000 #define SMP_BOOTREG_ADDR 0x10000030 /* Board init. */ static struct arm_boot_info realview_binfo = { .smp_loader_start = SMP_BOOT_ADDR, .smp_bootreg_addr = SMP_BOOTREG_ADDR, }; /* The following two lists must be consistent. */ enum realview_board_type { BOARD_EB, BOARD_EB_MPCORE, BOARD_PB_A8, BOARD_PBX_A9, }; static const int realview_board_id[] = { 0x33b, 0x33b, 0x769, 0x76d }; static void split_irq_from_named(DeviceState *src, const char* outname, qemu_irq out1, qemu_irq out2) { DeviceState *splitter = qdev_new(TYPE_SPLIT_IRQ); qdev_prop_set_uint32(splitter, "num-lines", 2); qdev_realize_and_unref(splitter, NULL, &error_fatal); qdev_connect_gpio_out(splitter, 0, out1); qdev_connect_gpio_out(splitter, 1, out2); qdev_connect_gpio_out_named(src, outname, 0, qdev_get_gpio_in(splitter, 0)); } static void realview_init(MachineState *machine, enum realview_board_type board_type) { ARMCPU *cpu = NULL; CPUARMState *env; MemoryRegion *sysmem = get_system_memory(); MemoryRegion *ram_lo; MemoryRegion *ram_hi = g_new(MemoryRegion, 1); MemoryRegion *ram_alias = g_new(MemoryRegion, 1); MemoryRegion *ram_hack = g_new(MemoryRegion, 1); DeviceState *dev, *sysctl, *gpio2, *pl041; SysBusDevice *busdev; qemu_irq pic[64]; PCIBus *pci_bus = NULL; DriveInfo *dinfo; I2CBus *i2c; int n; unsigned int smp_cpus = machine->smp.cpus; qemu_irq cpu_irq[4]; int is_mpcore = 0; int is_pb = 0; uint32_t proc_id = 0; uint32_t sys_id; ram_addr_t low_ram_size; ram_addr_t ram_size = machine->ram_size; hwaddr periphbase = 0; switch (board_type) { case BOARD_EB: break; case BOARD_EB_MPCORE: is_mpcore = 1; periphbase = 0x10100000; break; case BOARD_PB_A8: is_pb = 1; break; case BOARD_PBX_A9: is_mpcore = 1; is_pb = 1; periphbase = 0x1f000000; break; } for (n = 0; n < smp_cpus; n++) { Object *cpuobj = object_new(machine->cpu_type); /* By default A9,A15 and ARM1176 CPUs have EL3 enabled. This board * does not currently support EL3 so the CPU EL3 property is disabled * before realization. */ if (object_property_find(cpuobj, "has_el3")) { object_property_set_bool(cpuobj, "has_el3", false, &error_fatal); } if (is_pb && is_mpcore) { object_property_set_int(cpuobj, "reset-cbar", periphbase, &error_fatal); } qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpuobj), ARM_CPU_IRQ); } cpu = ARM_CPU(first_cpu); env = &cpu->env; if (arm_feature(env, ARM_FEATURE_V7)) { if (is_mpcore) { proc_id = 0x0c000000; } else { proc_id = 0x0e000000; } } else if (arm_feature(env, ARM_FEATURE_V6K)) { proc_id = 0x06000000; } else if (arm_feature(env, ARM_FEATURE_V6)) { proc_id = 0x04000000; } else { proc_id = 0x02000000; } if (is_pb && ram_size > 0x20000000) { /* Core tile RAM. */ ram_lo = g_new(MemoryRegion, 1); low_ram_size = ram_size - 0x20000000; ram_size = 0x20000000; memory_region_init_ram(ram_lo, NULL, "realview.lowmem", low_ram_size, &error_fatal); memory_region_add_subregion(sysmem, 0x20000000, ram_lo); } memory_region_init_ram(ram_hi, NULL, "realview.highmem", ram_size, &error_fatal); low_ram_size = ram_size; if (low_ram_size > 0x10000000) low_ram_size = 0x10000000; /* SDRAM at address zero. */ memory_region_init_alias(ram_alias, NULL, "realview.alias", ram_hi, 0, low_ram_size); memory_region_add_subregion(sysmem, 0, ram_alias); if (is_pb) { /* And again at a high address. */ memory_region_add_subregion(sysmem, 0x70000000, ram_hi); } else { ram_size = low_ram_size; } sys_id = is_pb ? 0x01780500 : 0xc1400400; sysctl = qdev_new("realview_sysctl"); qdev_prop_set_uint32(sysctl, "sys_id", sys_id); qdev_prop_set_uint32(sysctl, "proc_id", proc_id); sysbus_realize_and_unref(SYS_BUS_DEVICE(sysctl), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000); if (is_mpcore) { dev = qdev_new(is_pb ? TYPE_A9MPCORE_PRIV : "realview_mpcore"); qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, periphbase); for (n = 0; n < smp_cpus; n++) { sysbus_connect_irq(busdev, n, cpu_irq[n]); } sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL); /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */ realview_binfo.gic_cpu_if_addr = periphbase + 0x100; } else { uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000; /* For now just create the nIRQ GIC, and ignore the others. */ dev = sysbus_create_simple(TYPE_REALVIEW_GIC, gic_addr, cpu_irq[0]); } for (n = 0; n < 64; n++) { pic[n] = qdev_get_gpio_in(dev, n); } pl041 = qdev_new("pl041"); qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512); if (machine->audiodev) { qdev_prop_set_string(pl041, "audiodev", machine->audiodev); } sysbus_realize_and_unref(SYS_BUS_DEVICE(pl041), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000); sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[19]); sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]); sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]); pl011_create(0x10009000, pic[12], serial_hd(0)); pl011_create(0x1000a000, pic[13], serial_hd(1)); pl011_create(0x1000b000, pic[14], serial_hd(2)); pl011_create(0x1000c000, pic[15], serial_hd(3)); /* DMA controller is optional, apparently. */ dev = qdev_new("pl081"); object_property_set_link(OBJECT(dev), "downstream", OBJECT(sysmem), &error_fatal); busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, 0x10030000); sysbus_connect_irq(busdev, 0, pic[24]); sysbus_create_simple("sp804", 0x10011000, pic[4]); sysbus_create_simple("sp804", 0x10012000, pic[5]); sysbus_create_simple("pl061", 0x10013000, pic[6]); sysbus_create_simple("pl061", 0x10014000, pic[7]); gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]); sysbus_create_simple("pl111", 0x10020000, pic[23]); dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL); /* Wire up MMC card detect and read-only signals. These have * to go to both the PL061 GPIO and the sysctl register. * Note that the PL181 orders these lines (readonly,inserted) * and the PL061 has them the other way about. Also the card * detect line is inverted. */ split_irq_from_named(dev, "card-read-only", qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT), qdev_get_gpio_in(gpio2, 1)); split_irq_from_named(dev, "card-inserted", qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN), qemu_irq_invert(qdev_get_gpio_in(gpio2, 0))); dinfo = drive_get(IF_SD, 0, 0); if (dinfo) { DeviceState *card; card = qdev_new(TYPE_SD_CARD); qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), &error_fatal); qdev_realize_and_unref(card, qdev_get_child_bus(dev, "sd-bus"), &error_fatal); } sysbus_create_simple("pl031", 0x10017000, pic[10]); if (!is_pb) { dev = qdev_new("realview_pci"); busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, 0x10019000); /* PCI controller registers */ sysbus_mmio_map(busdev, 1, 0x60000000); /* PCI self-config */ sysbus_mmio_map(busdev, 2, 0x61000000); /* PCI config */ sysbus_mmio_map(busdev, 3, 0x62000000); /* PCI I/O */ sysbus_mmio_map(busdev, 4, 0x63000000); /* PCI memory window 1 */ sysbus_mmio_map(busdev, 5, 0x64000000); /* PCI memory window 2 */ sysbus_mmio_map(busdev, 6, 0x68000000); /* PCI memory window 3 */ sysbus_connect_irq(busdev, 0, pic[48]); sysbus_connect_irq(busdev, 1, pic[49]); sysbus_connect_irq(busdev, 2, pic[50]); sysbus_connect_irq(busdev, 3, pic[51]); pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci"); if (machine_usb(machine)) { pci_create_simple(pci_bus, -1, "pci-ohci"); } n = drive_get_max_bus(IF_SCSI); while (n >= 0) { dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a")); lsi53c8xx_handle_legacy_cmdline(dev); n--; } } if (qemu_find_nic_info(is_pb ? "lan9118" : "smc91c111", true, NULL)) { if (is_pb) { lan9118_init(0x4e000000, pic[28]); } else { smc91c111_init(0x4e000000, pic[28]); } } if (pci_bus) { pci_init_nic_devices(pci_bus, "rtl8139"); } dev = sysbus_create_simple(TYPE_ARM_SBCON_I2C, 0x10002000, NULL); i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); i2c_slave_create_simple(i2c, "ds1338", 0x68); /* Memory map for RealView Emulation Baseboard: */ /* 0x10000000 System registers. */ /* 0x10001000 System controller. */ /* 0x10002000 Two-Wire Serial Bus. */ /* 0x10003000 Reserved. */ /* 0x10004000 AACI. */ /* 0x10005000 MCI. */ /* 0x10006000 KMI0. */ /* 0x10007000 KMI1. */ /* 0x10008000 Character LCD. (EB) */ /* 0x10009000 UART0. */ /* 0x1000a000 UART1. */ /* 0x1000b000 UART2. */ /* 0x1000c000 UART3. */ /* 0x1000d000 SSPI. */ /* 0x1000e000 SCI. */ /* 0x1000f000 Reserved. */ /* 0x10010000 Watchdog. */ /* 0x10011000 Timer 0+1. */ /* 0x10012000 Timer 2+3. */ /* 0x10013000 GPIO 0. */ /* 0x10014000 GPIO 1. */ /* 0x10015000 GPIO 2. */ /* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */ /* 0x10017000 RTC. */ /* 0x10018000 DMC. */ /* 0x10019000 PCI controller config. */ /* 0x10020000 CLCD. */ /* 0x10030000 DMA Controller. */ /* 0x10040000 GIC1. (EB) */ /* 0x10050000 GIC2. (EB) */ /* 0x10060000 GIC3. (EB) */ /* 0x10070000 GIC4. (EB) */ /* 0x10080000 SMC. */ /* 0x1e000000 GIC1. (PB) */ /* 0x1e001000 GIC2. (PB) */ /* 0x1e002000 GIC3. (PB) */ /* 0x1e003000 GIC4. (PB) */ /* 0x40000000 NOR flash. */ /* 0x44000000 DoC flash. */ /* 0x48000000 SRAM. */ /* 0x4c000000 Configuration flash. */ /* 0x4e000000 Ethernet. */ /* 0x4f000000 USB. */ /* 0x50000000 PISMO. */ /* 0x54000000 PISMO. */ /* 0x58000000 PISMO. */ /* 0x5c000000 PISMO. */ /* 0x60000000 PCI. */ /* 0x60000000 PCI Self Config. */ /* 0x61000000 PCI Config. */ /* 0x62000000 PCI IO. */ /* 0x63000000 PCI mem 0. */ /* 0x64000000 PCI mem 1. */ /* 0x68000000 PCI mem 2. */ /* ??? Hack to map an additional page of ram for the secondary CPU startup code. I guess this works on real hardware because the BootROM happens to be in ROM/flash or in memory that isn't clobbered until after Linux boots the secondary CPUs. */ memory_region_init_ram(ram_hack, NULL, "realview.hack", 0x1000, &error_fatal); memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack); realview_binfo.ram_size = ram_size; realview_binfo.board_id = realview_board_id[board_type]; realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0); arm_load_kernel(cpu, machine, &realview_binfo); } static void realview_eb_init(MachineState *machine) { realview_init(machine, BOARD_EB); } static void realview_eb_mpcore_init(MachineState *machine) { realview_init(machine, BOARD_EB_MPCORE); } static void realview_pb_a8_init(MachineState *machine) { realview_init(machine, BOARD_PB_A8); } static void realview_pbx_a9_init(MachineState *machine) { realview_init(machine, BOARD_PBX_A9); } static void realview_eb_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); mc->desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)"; mc->init = realview_eb_init; mc->block_default_type = IF_SCSI; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm926"); machine_add_audiodev_property(mc); } static const TypeInfo realview_eb_type = { .name = MACHINE_TYPE_NAME("realview-eb"), .parent = TYPE_MACHINE, .class_init = realview_eb_class_init, }; static void realview_eb_mpcore_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); mc->desc = "ARM RealView Emulation Baseboard (ARM11MPCore)"; mc->init = realview_eb_mpcore_init; mc->block_default_type = IF_SCSI; mc->max_cpus = 4; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm11mpcore"); machine_add_audiodev_property(mc); } static const TypeInfo realview_eb_mpcore_type = { .name = MACHINE_TYPE_NAME("realview-eb-mpcore"), .parent = TYPE_MACHINE, .class_init = realview_eb_mpcore_class_init, }; static void realview_pb_a8_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); mc->desc = "ARM RealView Platform Baseboard for Cortex-A8"; mc->init = realview_pb_a8_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8"); machine_add_audiodev_property(mc); } static const TypeInfo realview_pb_a8_type = { .name = MACHINE_TYPE_NAME("realview-pb-a8"), .parent = TYPE_MACHINE, .class_init = realview_pb_a8_class_init, }; static void realview_pbx_a9_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); mc->desc = "ARM RealView Platform Baseboard Explore for Cortex-A9"; mc->init = realview_pbx_a9_init; mc->max_cpus = 4; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); machine_add_audiodev_property(mc); } static const TypeInfo realview_pbx_a9_type = { .name = MACHINE_TYPE_NAME("realview-pbx-a9"), .parent = TYPE_MACHINE, .class_init = realview_pbx_a9_class_init, }; static void realview_machine_init(void) { type_register_static(&realview_eb_type); type_register_static(&realview_eb_mpcore_type); type_register_static(&realview_pb_a8_type); type_register_static(&realview_pbx_a9_type); } type_init(realview_machine_init)