/* * OpenPOWER Palmetto BMC * * Andrew Jeffery * * Copyright 2016 IBM Corp. * * This code is licensed under the GPL version 2 or later. See * the COPYING file in the top-level directory. */ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/arm/boot.h" #include "hw/arm/aspeed.h" #include "hw/arm/aspeed_soc.h" #include "hw/i2c/i2c_mux_pca954x.h" #include "hw/i2c/smbus_eeprom.h" #include "hw/misc/pca9552.h" #include "hw/sensor/tmp105.h" #include "hw/misc/led.h" #include "hw/qdev-properties.h" #include "sysemu/block-backend.h" #include "sysemu/reset.h" #include "hw/loader.h" #include "qemu/error-report.h" #include "qemu/units.h" #include "hw/qdev-clock.h" static struct arm_boot_info aspeed_board_binfo = { .board_id = -1, /* device-tree-only board */ }; struct AspeedMachineState { /* Private */ MachineState parent_obj; /* Public */ AspeedSoCState soc; MemoryRegion ram_container; MemoryRegion max_ram; bool mmio_exec; char *fmc_model; char *spi_model; }; /* Palmetto hardware value: 0x120CE416 */ #define PALMETTO_BMC_HW_STRAP1 ( \ SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) | \ SCU_AST2400_HW_STRAP_DRAM_CONFIG(2 /* DDR3 with CL=6, CWL=5 */) | \ SCU_AST2400_HW_STRAP_ACPI_DIS | \ SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) | \ SCU_HW_STRAP_VGA_CLASS_CODE | \ SCU_HW_STRAP_LPC_RESET_PIN | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) | \ SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \ SCU_HW_STRAP_SPI_WIDTH | \ SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT)) /* TODO: Find the actual hardware value */ #define SUPERMICROX11_BMC_HW_STRAP1 ( \ SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_128MB) | \ SCU_AST2400_HW_STRAP_DRAM_CONFIG(2) | \ SCU_AST2400_HW_STRAP_ACPI_DIS | \ SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) | \ SCU_HW_STRAP_VGA_CLASS_CODE | \ SCU_HW_STRAP_LPC_RESET_PIN | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) | \ SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \ SCU_HW_STRAP_SPI_WIDTH | \ SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT)) /* AST2500 evb hardware value: 0xF100C2E6 */ #define AST2500_EVB_HW_STRAP1 (( \ AST2500_HW_STRAP1_DEFAULTS | \ SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ SCU_AST2500_HW_STRAP_UART_DEBUG | \ SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ SCU_HW_STRAP_MAC1_RGMII | \ SCU_HW_STRAP_MAC0_RGMII) & \ ~SCU_HW_STRAP_2ND_BOOT_WDT) /* Romulus hardware value: 0xF10AD206 */ #define ROMULUS_BMC_HW_STRAP1 ( \ AST2500_HW_STRAP1_DEFAULTS | \ SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ SCU_AST2500_HW_STRAP_UART_DEBUG | \ SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) /* Sonorapass hardware value: 0xF100D216 */ #define SONORAPASS_BMC_HW_STRAP1 ( \ SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ SCU_AST2500_HW_STRAP_UART_DEBUG | \ SCU_AST2500_HW_STRAP_RESERVED28 | \ SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ SCU_HW_STRAP_VGA_CLASS_CODE | \ SCU_HW_STRAP_LPC_RESET_PIN | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \ SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ SCU_HW_STRAP_VGA_BIOS_ROM | \ SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ SCU_AST2500_HW_STRAP_RESERVED1) #define G220A_BMC_HW_STRAP1 ( \ SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ SCU_AST2500_HW_STRAP_UART_DEBUG | \ SCU_AST2500_HW_STRAP_RESERVED28 | \ SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ SCU_HW_STRAP_2ND_BOOT_WDT | \ SCU_HW_STRAP_VGA_CLASS_CODE | \ SCU_HW_STRAP_LPC_RESET_PIN | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \ SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) | \ SCU_AST2500_HW_STRAP_RESERVED1) /* FP5280G2 hardware value: 0XF100D286 */ #define FP5280G2_BMC_HW_STRAP1 ( \ SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ SCU_AST2500_HW_STRAP_UART_DEBUG | \ SCU_AST2500_HW_STRAP_RESERVED28 | \ SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ SCU_HW_STRAP_VGA_CLASS_CODE | \ SCU_HW_STRAP_LPC_RESET_PIN | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \ SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ SCU_HW_STRAP_MAC1_RGMII | \ SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ SCU_AST2500_HW_STRAP_RESERVED1) /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 /* Quanta-Q71l hardware value */ #define QUANTA_Q71L_BMC_HW_STRAP1 ( \ SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_128MB) | \ SCU_AST2400_HW_STRAP_DRAM_CONFIG(2/* DDR3 with CL=6, CWL=5 */) | \ SCU_AST2400_HW_STRAP_ACPI_DIS | \ SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_24M_IN) | \ SCU_HW_STRAP_VGA_CLASS_CODE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_PASS_THROUGH) | \ SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \ SCU_HW_STRAP_SPI_WIDTH | \ SCU_HW_STRAP_VGA_SIZE_SET(VGA_8M_DRAM) | \ SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT)) /* AST2600 evb hardware value */ #define AST2600_EVB_HW_STRAP1 0x000000C0 #define AST2600_EVB_HW_STRAP2 0x00000003 /* Tacoma hardware value */ #define TACOMA_BMC_HW_STRAP1 0x00000000 #define TACOMA_BMC_HW_STRAP2 0x00000040 /* Rainier hardware value: (QEMU prototype) */ #define RAINIER_BMC_HW_STRAP1 0x00422016 #define RAINIER_BMC_HW_STRAP2 0x80000848 /* Fuji hardware value */ #define FUJI_BMC_HW_STRAP1 0x00000000 #define FUJI_BMC_HW_STRAP2 0x00000000 /* Bletchley hardware value */ /* TODO: Leave same as EVB for now. */ #define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1 #define BLETCHLEY_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2 /* Qualcomm DC-SCM hardware value */ #define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000 #define QCOM_DC_SCM_V1_BMC_HW_STRAP2 0x00000041 #define AST_SMP_MAILBOX_BASE 0x1e6e2180 #define AST_SMP_MBOX_FIELD_ENTRY (AST_SMP_MAILBOX_BASE + 0x0) #define AST_SMP_MBOX_FIELD_GOSIGN (AST_SMP_MAILBOX_BASE + 0x4) #define AST_SMP_MBOX_FIELD_READY (AST_SMP_MAILBOX_BASE + 0x8) #define AST_SMP_MBOX_FIELD_POLLINSN (AST_SMP_MAILBOX_BASE + 0xc) #define AST_SMP_MBOX_CODE (AST_SMP_MAILBOX_BASE + 0x10) #define AST_SMP_MBOX_GOSIGN 0xabbaab00 static void aspeed_write_smpboot(ARMCPU *cpu, const struct arm_boot_info *info) { static const uint32_t poll_mailbox_ready[] = { /* * r2 = per-cpu go sign value * r1 = AST_SMP_MBOX_FIELD_ENTRY * r0 = AST_SMP_MBOX_FIELD_GOSIGN */ 0xee100fb0, /* mrc p15, 0, r0, c0, c0, 5 */ 0xe21000ff, /* ands r0, r0, #255 */ 0xe59f201c, /* ldr r2, [pc, #28] */ 0xe1822000, /* orr r2, r2, r0 */ 0xe59f1018, /* ldr r1, [pc, #24] */ 0xe59f0018, /* ldr r0, [pc, #24] */ 0xe320f002, /* wfe */ 0xe5904000, /* ldr r4, [r0] */ 0xe1520004, /* cmp r2, r4 */ 0x1afffffb, /* bne */ 0xe591f000, /* ldr pc, [r1] */ AST_SMP_MBOX_GOSIGN, AST_SMP_MBOX_FIELD_ENTRY, AST_SMP_MBOX_FIELD_GOSIGN, }; rom_add_blob_fixed("aspeed.smpboot", poll_mailbox_ready, sizeof(poll_mailbox_ready), info->smp_loader_start); } static void aspeed_reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info) { AddressSpace *as = arm_boot_address_space(cpu, info); CPUState *cs = CPU(cpu); /* info->smp_bootreg_addr */ address_space_stl_notdirty(as, AST_SMP_MBOX_FIELD_GOSIGN, 0, MEMTXATTRS_UNSPECIFIED, NULL); cpu_set_pc(cs, info->smp_loader_start); } #define FIRMWARE_ADDR 0x0 static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size, Error **errp) { BlockBackend *blk = blk_by_legacy_dinfo(dinfo); g_autofree void *storage = NULL; int64_t size; /* The block backend size should have already been 'validated' by * the creation of the m25p80 object. */ size = blk_getlength(blk); if (size <= 0) { error_setg(errp, "failed to get flash size"); return; } if (rom_size > size) { rom_size = size; } storage = g_malloc0(rom_size); if (blk_pread(blk, 0, storage, rom_size) < 0) { error_setg(errp, "failed to read the initial flash content"); return; } rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr); } static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, unsigned int count, int unit0) { int i; if (!flashtype) { return; } for (i = 0; i < count; ++i) { DriveInfo *dinfo = drive_get(IF_MTD, 0, unit0 + i); qemu_irq cs_line; DeviceState *dev; dev = qdev_new(flashtype); if (dinfo) { qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo)); } qdev_realize_and_unref(dev, BUS(s->spi), &error_fatal); cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0); sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line); } } static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo) { DeviceState *card; if (!dinfo) { return; } card = qdev_new(TYPE_SD_CARD); qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), &error_fatal); qdev_realize_and_unref(card, qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), &error_fatal); } static void aspeed_machine_init(MachineState *machine) { AspeedMachineState *bmc = ASPEED_MACHINE(machine); AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine); AspeedSoCClass *sc; DriveInfo *drive0 = drive_get(IF_MTD, 0, 0); int i; NICInfo *nd = &nd_table[0]; object_initialize_child(OBJECT(machine), "soc", &bmc->soc, amc->soc_name); sc = ASPEED_SOC_GET_CLASS(&bmc->soc); /* * This will error out if the RAM size is not supported by the * memory controller of the SoC. */ object_property_set_uint(OBJECT(&bmc->soc), "ram-size", machine->ram_size, &error_fatal); for (i = 0; i < sc->macs_num; i++) { if ((amc->macs_mask & (1 << i)) && nd->used) { qemu_check_nic_model(nd, TYPE_FTGMAC100); qdev_set_nic_properties(DEVICE(&bmc->soc.ftgmac100[i]), nd); nd++; } } object_property_set_int(OBJECT(&bmc->soc), "hw-strap1", amc->hw_strap1, &error_abort); object_property_set_int(OBJECT(&bmc->soc), "hw-strap2", amc->hw_strap2, &error_abort); object_property_set_link(OBJECT(&bmc->soc), "memory", OBJECT(get_system_memory()), &error_abort); object_property_set_link(OBJECT(&bmc->soc), "dram", OBJECT(machine->ram), &error_abort); if (machine->kernel_filename) { /* * When booting with a -kernel command line there is no u-boot * that runs to unlock the SCU. In this case set the default to * be unlocked as the kernel expects */ object_property_set_int(OBJECT(&bmc->soc), "hw-prot-key", ASPEED_SCU_PROT_KEY, &error_abort); } qdev_prop_set_uint32(DEVICE(&bmc->soc), "uart-default", amc->uart_default); qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort); aspeed_board_init_flashes(&bmc->soc.fmc, bmc->fmc_model ? bmc->fmc_model : amc->fmc_model, amc->num_cs, 0); aspeed_board_init_flashes(&bmc->soc.spi[0], bmc->spi_model ? bmc->spi_model : amc->spi_model, 1, amc->num_cs); /* Install first FMC flash content as a boot rom. */ if (drive0) { AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0]; MemoryRegion *boot_rom = g_new(MemoryRegion, 1); uint64_t size = memory_region_size(&fl->mmio); /* * create a ROM region using the default mapping window size of * the flash module. The window size is 64MB for the AST2400 * SoC and 128MB for the AST2500 SoC, which is twice as big as * needed by the flash modules of the Aspeed machines. */ if (ASPEED_MACHINE(machine)->mmio_exec) { memory_region_init_alias(boot_rom, NULL, "aspeed.boot_rom", &fl->mmio, 0, size); memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, boot_rom); } else { memory_region_init_rom(boot_rom, NULL, "aspeed.boot_rom", size, &error_abort); memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, boot_rom); write_boot_rom(drive0, FIRMWARE_ADDR, size, &error_abort); } } if (machine->kernel_filename && sc->num_cpus > 1) { /* With no u-boot we must set up a boot stub for the secondary CPU */ MemoryRegion *smpboot = g_new(MemoryRegion, 1); memory_region_init_ram(smpboot, NULL, "aspeed.smpboot", 0x80, &error_abort); memory_region_add_subregion(get_system_memory(), AST_SMP_MAILBOX_BASE, smpboot); aspeed_board_binfo.write_secondary_boot = aspeed_write_smpboot; aspeed_board_binfo.secondary_cpu_reset_hook = aspeed_reset_secondary; aspeed_board_binfo.smp_loader_start = AST_SMP_MBOX_CODE; } aspeed_board_binfo.ram_size = machine->ram_size; aspeed_board_binfo.loader_start = sc->memmap[ASPEED_DEV_SDRAM]; if (amc->i2c_init) { amc->i2c_init(bmc); } for (i = 0; i < bmc->soc.sdhci.num_slots; i++) { sdhci_attach_drive(&bmc->soc.sdhci.slots[i], drive_get(IF_SD, 0, i)); } if (bmc->soc.emmc.num_slots) { sdhci_attach_drive(&bmc->soc.emmc.slots[0], drive_get(IF_SD, 0, bmc->soc.sdhci.num_slots)); } arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo); } static void at24c_eeprom_init(I2CBus *bus, uint8_t addr, uint32_t rsize) { I2CSlave *i2c_dev = i2c_slave_new("at24c-eeprom", addr); DeviceState *dev = DEVICE(i2c_dev); qdev_prop_set_uint32(dev, "rom-size", rsize); i2c_slave_realize_and_unref(i2c_dev, bus, &error_abort); } static void palmetto_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; DeviceState *dev; uint8_t *eeprom_buf = g_malloc0(32 * 1024); /* The palmetto platform expects a ds3231 RTC but a ds1338 is * enough to provide basic RTC features. Alarms will be missing */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68); smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50, eeprom_buf); /* add a TMP423 temperature sensor */ dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp423", 0x4c)); object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); object_property_set_int(OBJECT(dev), "temperature3", 110000, &error_abort); } static void quanta_q71l_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; /* * The quanta-q71l platform expects tmp75s which are compatible with * tmp105s. */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4c); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4e); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4f); /* TODO: i2c-1: Add baseboard FRU eeprom@54 24c64 */ /* TODO: i2c-1: Add Frontpanel FRU eeprom@57 24c64 */ /* TODO: Add Memory Riser i2c mux and eeproms. */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "pca9546", 0x74); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "pca9548", 0x77); /* TODO: i2c-3: Add BIOS FRU eeprom@56 24c64 */ /* i2c-7 */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9546", 0x70); /* - i2c@0: pmbus@59 */ /* - i2c@1: pmbus@58 */ /* - i2c@2: pmbus@58 */ /* - i2c@3: pmbus@59 */ /* TODO: i2c-7: Add PDB FRU eeprom@52 */ /* TODO: i2c-8: Add BMC FRU eeprom@50 */ } static void ast2500_evb_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 3), 0x50, eeprom_buf); /* The AST2500 EVB expects a LM75 but a TMP105 is compatible */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), TYPE_TMP105, 0x4d); } static void ast2600_evb_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 7), 0x50, eeprom_buf); /* LM75 is compatible with TMP105 driver */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_TMP105, 0x4d); } static void romulus_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; /* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); } static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr) { i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id), TYPE_PCA9552, addr); } static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; /* bus 2 : */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49); /* bus 2 : pca9546 @ 0x73 */ /* bus 3 : pca9548 @ 0x70 */ /* bus 4 : */ uint8_t *eeprom4_54 = g_malloc0(8 * 1024); smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54, eeprom4_54); /* PCA9539 @ 0x76, but PCA9552 is compatible */ create_pca9552(soc, 4, 0x76); /* PCA9539 @ 0x77, but PCA9552 is compatible */ create_pca9552(soc, 4, 0x77); /* bus 6 : */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49); /* bus 6 : pca9546 @ 0x73 */ /* bus 8 : */ uint8_t *eeprom8_56 = g_malloc0(8 * 1024); smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 8), 0x56, eeprom8_56); create_pca9552(soc, 8, 0x60); create_pca9552(soc, 8, 0x61); /* bus 8 : adc128d818 @ 0x1d */ /* bus 8 : adc128d818 @ 0x1f */ /* * bus 13 : pca9548 @ 0x71 * - channel 3: * - tmm421 @ 0x4c * - tmp421 @ 0x4e * - tmp421 @ 0x4f */ } static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc) { static const struct { unsigned gpio_id; LEDColor color; const char *description; bool gpio_polarity; } pca1_leds[] = { {13, LED_COLOR_GREEN, "front-fault-4", GPIO_POLARITY_ACTIVE_LOW}, {14, LED_COLOR_GREEN, "front-power-3", GPIO_POLARITY_ACTIVE_LOW}, {15, LED_COLOR_GREEN, "front-id-5", GPIO_POLARITY_ACTIVE_LOW}, }; AspeedSoCState *soc = &bmc->soc; uint8_t *eeprom_buf = g_malloc0(8 * 1024); DeviceState *dev; LEDState *led; /* Bus 3: TODO bmp280@77 */ dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60)); qdev_prop_set_string(dev, "description", "pca1"); i2c_slave_realize_and_unref(I2C_SLAVE(dev), aspeed_i2c_get_bus(&soc->i2c, 3), &error_fatal); for (size_t i = 0; i < ARRAY_SIZE(pca1_leds); i++) { led = led_create_simple(OBJECT(bmc), pca1_leds[i].gpio_polarity, pca1_leds[i].color, pca1_leds[i].description); qdev_connect_gpio_out(dev, pca1_leds[i].gpio_id, qdev_get_gpio_in(DEVICE(led), 0)); } i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "dps310", 0x76); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "max31785", 0x52); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c); /* The Witherspoon expects a TMP275 but a TMP105 is compatible */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105, 0x4a); /* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51, eeprom_buf); dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60)); qdev_prop_set_string(dev, "description", "pca0"); i2c_slave_realize_and_unref(I2C_SLAVE(dev), aspeed_i2c_get_bus(&soc->i2c, 11), &error_fatal); /* Bus 11: TODO ucd90160@64 */ } static void g220a_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; DeviceState *dev; dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "emc1413", 0x4c)); object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), "emc1413", 0x4c)); object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 13), "emc1413", 0x4c)); object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); static uint8_t eeprom_buf[2 * 1024] = { 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0xfe, 0x01, 0x06, 0x00, 0xc9, 0x42, 0x79, 0x74, 0x65, 0x64, 0x61, 0x6e, 0x63, 0x65, 0xc5, 0x47, 0x32, 0x32, 0x30, 0x41, 0xc4, 0x41, 0x41, 0x42, 0x42, 0xc4, 0x43, 0x43, 0x44, 0x44, 0xc4, 0x45, 0x45, 0x46, 0x46, 0xc4, 0x48, 0x48, 0x47, 0x47, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa7, }; smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x57, eeprom_buf); } static void aspeed_eeprom_init(I2CBus *bus, uint8_t addr, uint32_t rsize) { I2CSlave *i2c_dev = i2c_slave_new("at24c-eeprom", addr); DeviceState *dev = DEVICE(i2c_dev); qdev_prop_set_uint32(dev, "rom-size", rsize); i2c_slave_realize_and_unref(i2c_dev, bus, &error_abort); } static void fp5280g2_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; I2CSlave *i2c_mux; /* The at24c256 */ at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 1), 0x50, 32768); /* The fp5280g2 expects a TMP112 but a TMP105 is compatible */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105, 0x48); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105, 0x49); i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "pca9546", 0x70); /* It expects a TMP112 but a TMP105 is compatible */ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 0), TYPE_TMP105, 0x4a); /* It expects a ds3232 but a ds1338 is good enough */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "ds1338", 0x68); /* It expects a pca9555 but a pca9552 is compatible */ create_pca9552(soc, 8, 0x30); } static void rainier_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; I2CSlave *i2c_mux; aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 0), 0x51, 32 * KiB); create_pca9552(soc, 3, 0x61); /* The rainier expects a TMP275 but a TMP105 is compatible */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105, 0x48); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105, 0x49); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105, 0x4a); i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "pca9546", 0x70); aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB); aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB); aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x52, 64 * KiB); create_pca9552(soc, 4, 0x60); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105, 0x48); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105, 0x49); create_pca9552(soc, 5, 0x60); create_pca9552(soc, 5, 0x61); i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "pca9546", 0x70); aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB); aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105, 0x48); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105, 0x4a); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105, 0x4b); i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "pca9546", 0x70); aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB); aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB); aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x50, 64 * KiB); aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 3), 0x51, 64 * KiB); create_pca9552(soc, 7, 0x30); create_pca9552(soc, 7, 0x31); create_pca9552(soc, 7, 0x32); create_pca9552(soc, 7, 0x33); create_pca9552(soc, 7, 0x60); create_pca9552(soc, 7, 0x61); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "dps310", 0x76); /* Bus 7: TODO si7021-a20@20 */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), TYPE_TMP105, 0x48); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "max31785", 0x52); aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 7), 0x50, 64 * KiB); aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 7), 0x51, 64 * KiB); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_TMP105, 0x48); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_TMP105, 0x4a); aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 8), 0x50, 64 * KiB); aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 8), 0x51, 64 * KiB); create_pca9552(soc, 8, 0x60); create_pca9552(soc, 8, 0x61); /* Bus 8: ucd90320@11 */ /* Bus 8: ucd90320@b */ /* Bus 8: ucd90320@c */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4d); aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 9), 0x50, 128 * KiB); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4d); aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 10), 0x50, 128 * KiB); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), TYPE_TMP105, 0x48); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), TYPE_TMP105, 0x49); i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "pca9546", 0x70); aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB); aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB); create_pca9552(soc, 11, 0x60); aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 13), 0x50, 64 * KiB); create_pca9552(soc, 13, 0x60); aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 14), 0x50, 64 * KiB); create_pca9552(soc, 14, 0x60); aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 15), 0x50, 64 * KiB); create_pca9552(soc, 15, 0x60); } static void get_pca9548_channels(I2CBus *bus, uint8_t mux_addr, I2CBus **channels) { I2CSlave *mux = i2c_slave_create_simple(bus, "pca9548", mux_addr); for (int i = 0; i < 8; i++) { channels[i] = pca954x_i2c_get_bus(mux, i); } } #define TYPE_LM75 TYPE_TMP105 #define TYPE_TMP75 TYPE_TMP105 #define TYPE_TMP422 "tmp422" static void fuji_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; I2CBus *i2c[144] = {}; for (int i = 0; i < 16; i++) { i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); } I2CBus *i2c180 = i2c[2]; I2CBus *i2c480 = i2c[8]; I2CBus *i2c600 = i2c[11]; get_pca9548_channels(i2c180, 0x70, &i2c[16]); get_pca9548_channels(i2c480, 0x70, &i2c[24]); /* NOTE: The device tree skips [32, 40) in the alias numbering */ get_pca9548_channels(i2c600, 0x77, &i2c[40]); get_pca9548_channels(i2c[24], 0x71, &i2c[48]); get_pca9548_channels(i2c[25], 0x72, &i2c[56]); get_pca9548_channels(i2c[26], 0x76, &i2c[64]); get_pca9548_channels(i2c[27], 0x76, &i2c[72]); for (int i = 0; i < 8; i++) { get_pca9548_channels(i2c[40 + i], 0x76, &i2c[80 + i * 8]); } i2c_slave_create_simple(i2c[17], TYPE_LM75, 0x4c); i2c_slave_create_simple(i2c[17], TYPE_LM75, 0x4d); aspeed_eeprom_init(i2c[19], 0x52, 64 * KiB); aspeed_eeprom_init(i2c[20], 0x50, 2 * KiB); aspeed_eeprom_init(i2c[22], 0x52, 2 * KiB); i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x48); i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x49); i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x4a); i2c_slave_create_simple(i2c[3], TYPE_TMP422, 0x4c); aspeed_eeprom_init(i2c[8], 0x51, 64 * KiB); i2c_slave_create_simple(i2c[8], TYPE_LM75, 0x4a); i2c_slave_create_simple(i2c[50], TYPE_LM75, 0x4c); aspeed_eeprom_init(i2c[50], 0x52, 64 * KiB); i2c_slave_create_simple(i2c[51], TYPE_TMP75, 0x48); i2c_slave_create_simple(i2c[52], TYPE_TMP75, 0x49); i2c_slave_create_simple(i2c[59], TYPE_TMP75, 0x48); i2c_slave_create_simple(i2c[60], TYPE_TMP75, 0x49); aspeed_eeprom_init(i2c[65], 0x53, 64 * KiB); i2c_slave_create_simple(i2c[66], TYPE_TMP75, 0x49); i2c_slave_create_simple(i2c[66], TYPE_TMP75, 0x48); aspeed_eeprom_init(i2c[68], 0x52, 64 * KiB); aspeed_eeprom_init(i2c[69], 0x52, 64 * KiB); aspeed_eeprom_init(i2c[70], 0x52, 64 * KiB); aspeed_eeprom_init(i2c[71], 0x52, 64 * KiB); aspeed_eeprom_init(i2c[73], 0x53, 64 * KiB); i2c_slave_create_simple(i2c[74], TYPE_TMP75, 0x49); i2c_slave_create_simple(i2c[74], TYPE_TMP75, 0x48); aspeed_eeprom_init(i2c[76], 0x52, 64 * KiB); aspeed_eeprom_init(i2c[77], 0x52, 64 * KiB); aspeed_eeprom_init(i2c[78], 0x52, 64 * KiB); aspeed_eeprom_init(i2c[79], 0x52, 64 * KiB); aspeed_eeprom_init(i2c[28], 0x50, 2 * KiB); for (int i = 0; i < 8; i++) { aspeed_eeprom_init(i2c[81 + i * 8], 0x56, 64 * KiB); i2c_slave_create_simple(i2c[82 + i * 8], TYPE_TMP75, 0x48); i2c_slave_create_simple(i2c[83 + i * 8], TYPE_TMP75, 0x4b); i2c_slave_create_simple(i2c[84 + i * 8], TYPE_TMP75, 0x4a); } } #define TYPE_TMP421 "tmp421" static void bletchley_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; I2CBus *i2c[13] = {}; for (int i = 0; i < 13; i++) { if ((i == 8) || (i == 11)) { continue; } i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); } /* Bus 0 - 5 all have the same config. */ for (int i = 0; i < 6; i++) { /* Missing model: ti,ina230 @ 0x45 */ /* Missing model: mps,mp5023 @ 0x40 */ i2c_slave_create_simple(i2c[i], TYPE_TMP421, 0x4f); /* Missing model: nxp,pca9539 @ 0x76, but PCA9552 works enough */ i2c_slave_create_simple(i2c[i], TYPE_PCA9552, 0x76); i2c_slave_create_simple(i2c[i], TYPE_PCA9552, 0x67); /* Missing model: fsc,fusb302 @ 0x22 */ } /* Bus 6 */ at24c_eeprom_init(i2c[6], 0x56, 65536); /* Missing model: nxp,pcf85263 @ 0x51 , but ds1338 works enough */ i2c_slave_create_simple(i2c[6], "ds1338", 0x51); /* Bus 7 */ at24c_eeprom_init(i2c[7], 0x54, 65536); /* Bus 9 */ i2c_slave_create_simple(i2c[9], TYPE_TMP421, 0x4f); /* Bus 10 */ i2c_slave_create_simple(i2c[10], TYPE_TMP421, 0x4f); /* Missing model: ti,hdc1080 @ 0x40 */ i2c_slave_create_simple(i2c[10], TYPE_PCA9552, 0x67); /* Bus 12 */ /* Missing model: adi,adm1278 @ 0x11 */ i2c_slave_create_simple(i2c[12], TYPE_TMP421, 0x4c); i2c_slave_create_simple(i2c[12], TYPE_TMP421, 0x4d); i2c_slave_create_simple(i2c[12], TYPE_PCA9552, 0x67); } static void fby35_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; I2CBus *i2c[16]; for (int i = 0; i < 16; i++) { i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i); } i2c_slave_create_simple(i2c[2], TYPE_LM75, 0x4f); i2c_slave_create_simple(i2c[8], TYPE_TMP421, 0x1f); /* Hotswap controller is actually supposed to be mp5920 or ltc4282. */ i2c_slave_create_simple(i2c[11], "adm1272", 0x44); i2c_slave_create_simple(i2c[12], TYPE_LM75, 0x4e); i2c_slave_create_simple(i2c[12], TYPE_LM75, 0x4f); aspeed_eeprom_init(i2c[4], 0x51, 128 * KiB); aspeed_eeprom_init(i2c[6], 0x51, 128 * KiB); aspeed_eeprom_init(i2c[8], 0x50, 32 * KiB); aspeed_eeprom_init(i2c[11], 0x51, 128 * KiB); aspeed_eeprom_init(i2c[11], 0x54, 128 * KiB); /* * TODO: There is a multi-master i2c connection to an AST1030 MiniBMC on * buses 0, 1, 2, 3, and 9. Source address 0x10, target address 0x20 on * each. */ } static void qcom_dc_scm_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 15), "tmp105", 0x4d); } static void qcom_dc_scm_firework_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; I2CSlave *therm_mux, *cpuvr_mux; /* Create the generic DC-SCM hardware */ qcom_dc_scm_bmc_i2c_init(bmc); /* Now create the Firework specific hardware */ /* I2C7 CPUVR MUX */ cpuvr_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9546", 0x70); i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 0), "pca9548", 0x72); i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 1), "pca9548", 0x72); i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 2), "pca9548", 0x72); i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 3), "pca9548", 0x72); /* I2C8 Thermal Diodes*/ therm_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), "pca9548", 0x70); i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 0), TYPE_LM75, 0x4C); i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 1), TYPE_LM75, 0x4C); i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 2), TYPE_LM75, 0x48); i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 3), TYPE_LM75, 0x48); i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 4), TYPE_LM75, 0x48); /* I2C9 Fan Controller (MAX31785) */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "max31785", 0x52); i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "max31785", 0x54); } static bool aspeed_get_mmio_exec(Object *obj, Error **errp) { return ASPEED_MACHINE(obj)->mmio_exec; } static void aspeed_set_mmio_exec(Object *obj, bool value, Error **errp) { ASPEED_MACHINE(obj)->mmio_exec = value; } static void aspeed_machine_instance_init(Object *obj) { ASPEED_MACHINE(obj)->mmio_exec = false; } static char *aspeed_get_fmc_model(Object *obj, Error **errp) { AspeedMachineState *bmc = ASPEED_MACHINE(obj); return g_strdup(bmc->fmc_model); } static void aspeed_set_fmc_model(Object *obj, const char *value, Error **errp) { AspeedMachineState *bmc = ASPEED_MACHINE(obj); g_free(bmc->fmc_model); bmc->fmc_model = g_strdup(value); } static char *aspeed_get_spi_model(Object *obj, Error **errp) { AspeedMachineState *bmc = ASPEED_MACHINE(obj); return g_strdup(bmc->spi_model); } static void aspeed_set_spi_model(Object *obj, const char *value, Error **errp) { AspeedMachineState *bmc = ASPEED_MACHINE(obj); g_free(bmc->spi_model); bmc->spi_model = g_strdup(value); } static void aspeed_machine_class_props_init(ObjectClass *oc) { object_class_property_add_bool(oc, "execute-in-place", aspeed_get_mmio_exec, aspeed_set_mmio_exec); object_class_property_set_description(oc, "execute-in-place", "boot directly from CE0 flash device"); object_class_property_add_str(oc, "fmc-model", aspeed_get_fmc_model, aspeed_set_fmc_model); object_class_property_set_description(oc, "fmc-model", "Change the FMC Flash model"); object_class_property_add_str(oc, "spi-model", aspeed_get_spi_model, aspeed_set_spi_model); object_class_property_set_description(oc, "spi-model", "Change the SPI Flash model"); } static int aspeed_soc_num_cpus(const char *soc_name) { AspeedSoCClass *sc = ASPEED_SOC_CLASS(object_class_by_name(soc_name)); return sc->num_cpus; } static void aspeed_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->init = aspeed_machine_init; mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; mc->default_ram_id = "ram"; amc->macs_mask = ASPEED_MAC0_ON; amc->uart_default = ASPEED_DEV_UART5; aspeed_machine_class_props_init(oc); } static void aspeed_machine_palmetto_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "OpenPOWER Palmetto BMC (ARM926EJ-S)"; amc->soc_name = "ast2400-a1"; amc->hw_strap1 = PALMETTO_BMC_HW_STRAP1; amc->fmc_model = "n25q256a"; amc->spi_model = "mx25l25635e"; amc->num_cs = 1; amc->i2c_init = palmetto_bmc_i2c_init; mc->default_ram_size = 256 * MiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static void aspeed_machine_quanta_q71l_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Quanta-Q71l BMC (ARM926EJ-S)"; amc->soc_name = "ast2400-a1"; amc->hw_strap1 = QUANTA_Q71L_BMC_HW_STRAP1; amc->fmc_model = "n25q256a"; amc->spi_model = "mx25l25635e"; amc->num_cs = 1; amc->i2c_init = quanta_q71l_bmc_i2c_init; mc->default_ram_size = 128 * MiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); } static void aspeed_machine_supermicrox11_bmc_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Supermicro X11 BMC (ARM926EJ-S)"; amc->soc_name = "ast2400-a1"; amc->hw_strap1 = SUPERMICROX11_BMC_HW_STRAP1; amc->fmc_model = "mx25l25635e"; amc->spi_model = "mx25l25635e"; amc->num_cs = 1; amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; amc->i2c_init = palmetto_bmc_i2c_init; mc->default_ram_size = 256 * MiB; } static void aspeed_machine_ast2500_evb_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Aspeed AST2500 EVB (ARM1176)"; amc->soc_name = "ast2500-a1"; amc->hw_strap1 = AST2500_EVB_HW_STRAP1; amc->fmc_model = "mx25l25635e"; amc->spi_model = "mx25l25635e"; amc->num_cs = 1; amc->i2c_init = ast2500_evb_i2c_init; mc->default_ram_size = 512 * MiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static void aspeed_machine_romulus_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "OpenPOWER Romulus BMC (ARM1176)"; amc->soc_name = "ast2500-a1"; amc->hw_strap1 = ROMULUS_BMC_HW_STRAP1; amc->fmc_model = "n25q256a"; amc->spi_model = "mx66l1g45g"; amc->num_cs = 2; amc->i2c_init = romulus_bmc_i2c_init; mc->default_ram_size = 512 * MiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static void aspeed_machine_sonorapass_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "OCP SonoraPass BMC (ARM1176)"; amc->soc_name = "ast2500-a1"; amc->hw_strap1 = SONORAPASS_BMC_HW_STRAP1; amc->fmc_model = "mx66l1g45g"; amc->spi_model = "mx66l1g45g"; amc->num_cs = 2; amc->i2c_init = sonorapass_bmc_i2c_init; mc->default_ram_size = 512 * MiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static void aspeed_machine_witherspoon_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "OpenPOWER Witherspoon BMC (ARM1176)"; amc->soc_name = "ast2500-a1"; amc->hw_strap1 = WITHERSPOON_BMC_HW_STRAP1; amc->fmc_model = "mx25l25635e"; amc->spi_model = "mx66l1g45g"; amc->num_cs = 2; amc->i2c_init = witherspoon_bmc_i2c_init; mc->default_ram_size = 512 * MiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Aspeed AST2600 EVB (Cortex-A7)"; amc->soc_name = "ast2600-a3"; amc->hw_strap1 = AST2600_EVB_HW_STRAP1; amc->hw_strap2 = AST2600_EVB_HW_STRAP2; amc->fmc_model = "mx66u51235f"; amc->spi_model = "mx66u51235f"; amc->num_cs = 1; amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON | ASPEED_MAC2_ON | ASPEED_MAC3_ON; amc->i2c_init = ast2600_evb_i2c_init; mc->default_ram_size = 1 * GiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static void aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "OpenPOWER Tacoma BMC (Cortex-A7)"; amc->soc_name = "ast2600-a3"; amc->hw_strap1 = TACOMA_BMC_HW_STRAP1; amc->hw_strap2 = TACOMA_BMC_HW_STRAP2; amc->fmc_model = "mx66l1g45g"; amc->spi_model = "mx66l1g45g"; amc->num_cs = 2; amc->macs_mask = ASPEED_MAC2_ON; amc->i2c_init = witherspoon_bmc_i2c_init; /* Same board layout */ mc->default_ram_size = 1 * GiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static void aspeed_machine_g220a_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Bytedance G220A BMC (ARM1176)"; amc->soc_name = "ast2500-a1"; amc->hw_strap1 = G220A_BMC_HW_STRAP1; amc->fmc_model = "n25q512a"; amc->spi_model = "mx25l25635e"; amc->num_cs = 2; amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; amc->i2c_init = g220a_bmc_i2c_init; mc->default_ram_size = 1024 * MiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static void aspeed_machine_fp5280g2_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Inspur FP5280G2 BMC (ARM1176)"; amc->soc_name = "ast2500-a1"; amc->hw_strap1 = FP5280G2_BMC_HW_STRAP1; amc->fmc_model = "n25q512a"; amc->spi_model = "mx25l25635e"; amc->num_cs = 2; amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON; amc->i2c_init = fp5280g2_bmc_i2c_init; mc->default_ram_size = 512 * MiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static void aspeed_machine_rainier_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "IBM Rainier BMC (Cortex-A7)"; amc->soc_name = "ast2600-a3"; amc->hw_strap1 = RAINIER_BMC_HW_STRAP1; amc->hw_strap2 = RAINIER_BMC_HW_STRAP2; amc->fmc_model = "mx66l1g45g"; amc->spi_model = "mx66l1g45g"; amc->num_cs = 2; amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON; amc->i2c_init = rainier_bmc_i2c_init; mc->default_ram_size = 1 * GiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; /* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */ #if HOST_LONG_BITS == 32 #define FUJI_BMC_RAM_SIZE (1 * GiB) #else #define FUJI_BMC_RAM_SIZE (2 * GiB) #endif static void aspeed_machine_fuji_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Facebook Fuji BMC (Cortex-A7)"; amc->soc_name = "ast2600-a3"; amc->hw_strap1 = FUJI_BMC_HW_STRAP1; amc->hw_strap2 = FUJI_BMC_HW_STRAP2; amc->fmc_model = "mx66l1g45g"; amc->spi_model = "mx66l1g45g"; amc->num_cs = 2; amc->macs_mask = ASPEED_MAC3_ON; amc->i2c_init = fuji_bmc_i2c_init; amc->uart_default = ASPEED_DEV_UART1; mc->default_ram_size = FUJI_BMC_RAM_SIZE; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static void aspeed_machine_bletchley_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Facebook Bletchley BMC (Cortex-A7)"; amc->soc_name = "ast2600-a3"; amc->hw_strap1 = BLETCHLEY_BMC_HW_STRAP1; amc->hw_strap2 = BLETCHLEY_BMC_HW_STRAP2; amc->fmc_model = "w25q01jvq"; amc->spi_model = NULL; amc->num_cs = 2; amc->macs_mask = ASPEED_MAC2_ON; amc->i2c_init = bletchley_bmc_i2c_init; mc->default_ram_size = 512 * MiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); } static void fby35_reset(MachineState *state) { AspeedMachineState *bmc = ASPEED_MACHINE(state); AspeedGPIOState *gpio = &bmc->soc.gpio; qemu_devices_reset(); /* Board ID */ object_property_set_bool(OBJECT(gpio), "gpioV4", true, &error_fatal); object_property_set_bool(OBJECT(gpio), "gpioV5", true, &error_fatal); object_property_set_bool(OBJECT(gpio), "gpioV6", true, &error_fatal); object_property_set_bool(OBJECT(gpio), "gpioV7", false, &error_fatal); } static void aspeed_machine_fby35_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Facebook fby35 BMC (Cortex-A7)"; mc->reset = fby35_reset; amc->fmc_model = "mx66l1g45g"; amc->num_cs = 2; amc->macs_mask = ASPEED_MAC3_ON; amc->i2c_init = fby35_i2c_init; /* FIXME: Replace this macro with something more general */ mc->default_ram_size = FUJI_BMC_RAM_SIZE; } #define AST1030_INTERNAL_FLASH_SIZE (1024 * 1024) /* Main SYSCLK frequency in Hz (200MHz) */ #define SYSCLK_FRQ 200000000ULL static void aspeed_minibmc_machine_init(MachineState *machine) { AspeedMachineState *bmc = ASPEED_MACHINE(machine); AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine); Clock *sysclk; sysclk = clock_new(OBJECT(machine), "SYSCLK"); clock_set_hz(sysclk, SYSCLK_FRQ); object_initialize_child(OBJECT(machine), "soc", &bmc->soc, amc->soc_name); qdev_connect_clock_in(DEVICE(&bmc->soc), "sysclk", sysclk); object_property_set_link(OBJECT(&bmc->soc), "memory", OBJECT(get_system_memory()), &error_abort); qdev_prop_set_uint32(DEVICE(&bmc->soc), "uart-default", amc->uart_default); qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort); aspeed_board_init_flashes(&bmc->soc.fmc, bmc->fmc_model ? bmc->fmc_model : amc->fmc_model, amc->num_cs, 0); aspeed_board_init_flashes(&bmc->soc.spi[0], bmc->spi_model ? bmc->spi_model : amc->spi_model, amc->num_cs, amc->num_cs); aspeed_board_init_flashes(&bmc->soc.spi[1], bmc->spi_model ? bmc->spi_model : amc->spi_model, amc->num_cs, (amc->num_cs * 2)); if (amc->i2c_init) { amc->i2c_init(bmc); } armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, AST1030_INTERNAL_FLASH_SIZE); } static void ast1030_evb_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = &bmc->soc; /* U10 24C08 connects to SDA/SCL Groupt 1 by default */ uint8_t *eeprom_buf = g_malloc0(32 * 1024); smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50, eeprom_buf); /* U11 LM75 connects to SDA/SCL Group 2 by default */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4d); } static void aspeed_minibmc_machine_ast1030_evb_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Aspeed AST1030 MiniBMC (Cortex-M4)"; amc->soc_name = "ast1030-a1"; amc->hw_strap1 = 0; amc->hw_strap2 = 0; mc->init = aspeed_minibmc_machine_init; amc->i2c_init = ast1030_evb_i2c_init; mc->default_ram_size = 0; mc->default_cpus = mc->min_cpus = mc->max_cpus = 1; amc->fmc_model = "sst25vf032b"; amc->spi_model = "sst25vf032b"; amc->num_cs = 2; amc->macs_mask = 0; } static void aspeed_machine_qcom_dc_scm_v1_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Qualcomm DC-SCM V1 BMC (Cortex A7)"; amc->soc_name = "ast2600-a3"; amc->hw_strap1 = QCOM_DC_SCM_V1_BMC_HW_STRAP1; amc->hw_strap2 = QCOM_DC_SCM_V1_BMC_HW_STRAP2; amc->fmc_model = "n25q512a"; amc->spi_model = "n25q512a"; amc->num_cs = 2; amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON; amc->i2c_init = qcom_dc_scm_bmc_i2c_init; mc->default_ram_size = 1 * GiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static void aspeed_machine_qcom_firework_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "Qualcomm DC-SCM V1/Firework BMC (Cortex A7)"; amc->soc_name = "ast2600-a3"; amc->hw_strap1 = QCOM_DC_SCM_V1_BMC_HW_STRAP1; amc->hw_strap2 = QCOM_DC_SCM_V1_BMC_HW_STRAP2; amc->fmc_model = "n25q512a"; amc->spi_model = "n25q512a"; amc->num_cs = 2; amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON; amc->i2c_init = qcom_dc_scm_firework_i2c_init; mc->default_ram_size = 1 * GiB; mc->default_cpus = mc->min_cpus = mc->max_cpus = aspeed_soc_num_cpus(amc->soc_name); }; static const TypeInfo aspeed_machine_types[] = { { .name = MACHINE_TYPE_NAME("palmetto-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_palmetto_class_init, }, { .name = MACHINE_TYPE_NAME("supermicrox11-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_supermicrox11_bmc_class_init, }, { .name = MACHINE_TYPE_NAME("ast2500-evb"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_ast2500_evb_class_init, }, { .name = MACHINE_TYPE_NAME("romulus-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_romulus_class_init, }, { .name = MACHINE_TYPE_NAME("sonorapass-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_sonorapass_class_init, }, { .name = MACHINE_TYPE_NAME("witherspoon-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_witherspoon_class_init, }, { .name = MACHINE_TYPE_NAME("ast2600-evb"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_ast2600_evb_class_init, }, { .name = MACHINE_TYPE_NAME("tacoma-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_tacoma_class_init, }, { .name = MACHINE_TYPE_NAME("g220a-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_g220a_class_init, }, { .name = MACHINE_TYPE_NAME("qcom-dc-scm-v1-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_qcom_dc_scm_v1_class_init, }, { .name = MACHINE_TYPE_NAME("qcom-firework-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_qcom_firework_class_init, }, { .name = MACHINE_TYPE_NAME("fp5280g2-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_fp5280g2_class_init, }, { .name = MACHINE_TYPE_NAME("quanta-q71l-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_quanta_q71l_class_init, }, { .name = MACHINE_TYPE_NAME("rainier-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_rainier_class_init, }, { .name = MACHINE_TYPE_NAME("fuji-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_fuji_class_init, }, { .name = MACHINE_TYPE_NAME("bletchley-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_bletchley_class_init, }, { .name = MACHINE_TYPE_NAME("fby35-bmc"), .parent = MACHINE_TYPE_NAME("ast2600-evb"), .class_init = aspeed_machine_fby35_class_init, }, { .name = MACHINE_TYPE_NAME("ast1030-evb"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_minibmc_machine_ast1030_evb_class_init, }, { .name = TYPE_ASPEED_MACHINE, .parent = TYPE_MACHINE, .instance_size = sizeof(AspeedMachineState), .instance_init = aspeed_machine_instance_init, .class_size = sizeof(AspeedMachineClass), .class_init = aspeed_machine_class_init, .abstract = true, } }; DEFINE_TYPES(aspeed_machine_types)