.. Copyright (c) 2017 Linaro Limited Written by Peter Maydell =================== Load and Store APIs =================== QEMU internally has multiple families of functions for performing loads and stores. This document attempts to enumerate them all and indicate when to use them. It does not provide detailed documentation of each API -- for that you should look at the documentation comments in the relevant header files. ``ld*_p and st*_p`` ~~~~~~~~~~~~~~~~~~~ These functions operate on a host pointer, and should be used when you already have a pointer into host memory (corresponding to guest ram or a local buffer). They deal with doing accesses with the desired endianness and with correctly handling potentially unaligned pointer values. Function names follow the pattern: load: ``ld{type}{sign}{size}_{endian}_p(ptr)`` store: ``st{type}{size}_{endian}_p(ptr, val)`` ``type`` - (empty) : integer access - ``f`` : float access ``sign`` - (empty) : for 32 or 64 bit sizes (including floats and doubles) - ``u`` : unsigned - ``s`` : signed ``size`` - ``b`` : 8 bits - ``w`` : 16 bits - ``l`` : 32 bits - ``q`` : 64 bits ``endian`` - ``he`` : host endian - ``be`` : big endian - ``le`` : little endian The ``_{endian}`` infix is omitted for target-endian accesses. The target endian accessors are only available to source files which are built per-target. There are also functions which take the size as an argument: load: ``ldn{endian}_p(ptr, sz)`` which performs an unsigned load of ``sz`` bytes from ``ptr`` as an ``{endian}`` order value and returns it in a uint64_t. store: ``stn{endian}_p(ptr, sz, val)`` which stores ``val`` to ``ptr`` as an ``{endian}`` order value of size ``sz`` bytes. Regexes for git grep - ``\`` - ``\`` - ``\`` - ``\`` ``cpu_{ld,st}_*`` ~~~~~~~~~~~~~~~~~ These functions operate on a guest virtual address. Be aware that these functions may cause a guest CPU exception to be taken (e.g. for an alignment fault or MMU fault) which will result in guest CPU state being updated and control longjumping out of the function call. They should therefore only be used in code that is implementing emulation of the target CPU. These functions may throw an exception (longjmp() back out to the top level TCG loop). This means they must only be used from helper functions where the translator has saved all necessary CPU state before generating the helper function call. It's usually better to use the ``_ra`` variants described below from helper functions, but these functions are the right choice for calls made from hooks like the CPU do_interrupt hook or when you know for certain that the translator had to save all the CPU state that ``cpu_restore_state()`` would restore anyway. Function names follow the pattern: load: ``cpu_ld{sign}{size}_{mmusuffix}(env, ptr)`` store: ``cpu_st{size}_{mmusuffix}(env, ptr, val)`` ``sign`` - (empty) : for 32 or 64 bit sizes - ``u`` : unsigned - ``s`` : signed ``size`` - ``b`` : 8 bits - ``w`` : 16 bits - ``l`` : 32 bits - ``q`` : 64 bits ``mmusuffix`` is one of the generic suffixes ``data`` or ``code``, or (for softmmu configs) a target-specific MMU mode suffix as defined in the target's ``cpu.h``. Regexes for git grep - ``\`` - ``\`` ``cpu_{ld,st}_*_ra`` ~~~~~~~~~~~~~~~~~~~~ These functions work like the ``cpu_{ld,st}_*`` functions except that they also take a ``retaddr`` argument. This extra argument allows for correct unwinding of any exception that is taken, and should generally be the result of GETPC() called directly from the top level HELPER(foo) function (i.e. the return address in the generated code). These are generally the preferred way to do accesses by guest virtual address from helper functions; see the documentation of the non-``_ra`` variants for when those would be better. Calling these functions with a ``retaddr`` argument of 0 is equivalent to calling the non-``_ra`` version of the function. Function names follow the pattern: load: ``cpu_ld{sign}{size}_{mmusuffix}_ra(env, ptr, retaddr)`` store: ``cpu_st{sign}{size}_{mmusuffix}_ra(env, ptr, val, retaddr)`` Regexes for git grep - ``\`` - ``\`` ``helper_*_{ld,st}*mmu`` ~~~~~~~~~~~~~~~~~~~~~~~~ These functions are intended primarily to be called by the code generated by the TCG backend. They may also be called by target CPU helper function code. Like the ``cpu_{ld,st}_*_ra`` functions they perform accesses by guest virtual address; the difference is that these functions allow you to specify an ``opindex`` parameter which encodes (among other things) the mmu index to use for the access. This is necessary if your helper needs to make an access via a specific mmu index (for instance, an "always as non-privileged" access) rather than using the default mmu index for the current state of the guest CPU. The ``opindex`` parameter should be created by calling ``make_memop_idx()``. The ``retaddr`` parameter should be the result of GETPC() called directly from the top level HELPER(foo) function (or 0 if no guest CPU state unwinding is required). **TODO** The names of these functions are a bit odd for historical reasons because they were originally expected to be called only from within generated code. We should rename them to bring them more in line with the other memory access functions. load: ``helper_{endian}_ld{sign}{size}_mmu(env, addr, opindex, retaddr)`` store: ``helper_{endian}_st{size}_mmu(env, addr, val, opindex, retaddr)`` ``sign`` - (empty) : for 32 or 64 bit sizes - ``u`` : unsigned - ``s`` : signed ``size`` - ``b`` : 8 bits - ``w`` : 16 bits - ``l`` : 32 bits - ``q`` : 64 bits ``endian`` - ``le`` : little endian - ``be`` : big endian - ``ret`` : target endianness Regexes for git grep - ``\`` - ``\`` ``address_space_*`` ~~~~~~~~~~~~~~~~~~~ These functions are the primary ones to use when emulating CPU or device memory accesses. They take an AddressSpace, which is the way QEMU defines the view of memory that a device or CPU has. (They generally correspond to being the "master" end of a hardware bus or bus fabric.) Each CPU has an AddressSpace. Some kinds of CPU have more than one AddressSpace (for instance ARM guest CPUs have an AddressSpace for the Secure world and one for NonSecure if they implement TrustZone). Devices which can do DMA-type operations should generally have an AddressSpace. There is also a "system address space" which typically has all the devices and memory that all CPUs can see. (Some older device models use the "system address space" rather than properly modelling that they have an AddressSpace of their own.) Functions are provided for doing byte-buffer reads and writes, and also for doing one-data-item loads and stores. In all cases the caller provides a MemTxAttrs to specify bus transaction attributes, and can check whether the memory transaction succeeded using a MemTxResult return code. ``address_space_read(address_space, addr, attrs, buf, len)`` ``address_space_write(address_space, addr, attrs, buf, len)`` ``address_space_rw(address_space, addr, attrs, buf, len, is_write)`` ``address_space_ld{sign}{size}_{endian}(address_space, addr, attrs, txresult)`` ``address_space_st{size}_{endian}(address_space, addr, val, attrs, txresult)`` ``sign`` - (empty) : for 32 or 64 bit sizes - ``u`` : unsigned (No signed load operations are provided.) ``size`` - ``b`` : 8 bits - ``w`` : 16 bits - ``l`` : 32 bits - ``q`` : 64 bits ``endian`` - ``le`` : little endian - ``be`` : big endian The ``_{endian}`` suffix is omitted for byte accesses. Regexes for git grep - ``\`` - ``\`` - ``\`` ``address_space_write_rom`` ~~~~~~~~~~~~~~~~~~~~~~~~~~~ This function performs a write by physical address like ``address_space_write``, except that if the write is to a ROM then the ROM contents will be modified, even though a write by the guest CPU to the ROM would be ignored. This is used for non-guest writes like writes from the gdb debug stub or initial loading of ROM contents. Note that portions of the write which attempt to write data to a device will be silently ignored -- only real RAM and ROM will be written to. Regexes for git grep - ``address_space_write_rom`` ``{ld,st}*_phys`` ~~~~~~~~~~~~~~~~~ These are functions which are identical to ``address_space_{ld,st}*``, except that they always pass ``MEMTXATTRS_UNSPECIFIED`` for the transaction attributes, and ignore whether the transaction succeeded or failed. The fact that they ignore whether the transaction succeeded means they should not be used in new code, unless you know for certain that your code will only be used in a context where the CPU or device doing the access has no way to report such an error. ``load: ld{sign}{size}_{endian}_phys`` ``store: st{size}_{endian}_phys`` ``sign`` - (empty) : for 32 or 64 bit sizes - ``u`` : unsigned (No signed load operations are provided.) ``size`` - ``b`` : 8 bits - ``w`` : 16 bits - ``l`` : 32 bits - ``q`` : 64 bits ``endian`` - ``le`` : little endian - ``be`` : big endian The ``_{endian}_`` infix is omitted for byte accesses. Regexes for git grep - ``\`` - ``\`` ``cpu_physical_memory_*`` ~~~~~~~~~~~~~~~~~~~~~~~~~ These are convenience functions which are identical to ``address_space_*`` but operate specifically on the system address space, always pass a ``MEMTXATTRS_UNSPECIFIED`` set of memory attributes and ignore whether the memory transaction succeeded or failed. For new code they are better avoided: * there is likely to be behaviour you need to model correctly for a failed read or write operation * a device should usually perform operations on its own AddressSpace rather than using the system address space ``cpu_physical_memory_read`` ``cpu_physical_memory_write`` ``cpu_physical_memory_rw`` Regexes for git grep - ``\`` ``cpu_memory_rw_debug`` ~~~~~~~~~~~~~~~~~~~~~~~ Access CPU memory by virtual address for debug purposes. This function is intended for use by the GDB stub and similar code. It takes a virtual address, converts it to a physical address via an MMU lookup using the current settings of the specified CPU, and then performs the access (using ``address_space_rw`` for reads or ``cpu_physical_memory_write_rom`` for writes). This means that if the access is a write to a ROM then this function will modify the contents (whereas a normal guest CPU access would ignore the write attempt). ``cpu_memory_rw_debug`` ``dma_memory_*`` ~~~~~~~~~~~~~~~~ These behave like ``address_space_*``, except that they perform a DMA barrier operation first. **TODO**: We should provide guidance on when you need the DMA barrier operation and when it's OK to use ``address_space_*``, and make sure our existing code is doing things correctly. ``dma_memory_read`` ``dma_memory_write`` ``dma_memory_rw`` Regexes for git grep - ``\`` ``pci_dma_*`` and ``{ld,st}*_pci_dma`` ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ These functions are specifically for PCI device models which need to perform accesses where the PCI device is a bus master. You pass them a ``PCIDevice *`` and they will do ``dma_memory_*`` operations on the correct address space for that device. ``pci_dma_read`` ``pci_dma_write`` ``pci_dma_rw`` ``load: ld{sign}{size}_{endian}_pci_dma`` ``store: st{size}_{endian}_pci_dma`` ``sign`` - (empty) : for 32 or 64 bit sizes - ``u`` : unsigned (No signed load operations are provided.) ``size`` - ``b`` : 8 bits - ``w`` : 16 bits - ``l`` : 32 bits - ``q`` : 64 bits ``endian`` - ``le`` : little endian - ``be`` : big endian The ``_{endian}_`` infix is omitted for byte accesses. Regexes for git grep - ``\`` - ``\`` - ``\``