================================== The QEMU build system architecture ================================== This document aims to help developers understand the architecture of the QEMU build system. As with projects using GNU autotools, the QEMU build system has two stages, first the developer runs the "configure" script to determine the local build environment characteristics, then they run "make" to build the project. There is about where the similarities with GNU autotools end, so try to forget what you know about them. Stage 1: configure ================== The QEMU configure script is written directly in shell, and should be compatible with any POSIX shell, hence it uses #!/bin/sh. An important implication of this is that it is important to avoid using bash-isms on development platforms where bash is the primary host. In contrast to autoconf scripts, QEMU's configure is expected to be silent while it is checking for features. It will only display output when an error occurs, or to show the final feature enablement summary on completion. Because QEMU uses the Meson build system under the hood, only VPATH builds are supported. There are two general ways to invoke configure & perform a build: - VPATH, build artifacts outside of QEMU source tree entirely:: cd ../ mkdir build cd build ../qemu/configure make - VPATH, build artifacts in a subdir of QEMU source tree:: mkdir build cd build ../configure make For now, checks on the compilation environment are found in configure rather than meson.build, though this is expected to change. The command line is parsed in the configure script and, whenever needed, converted into the appropriate options to Meson. New checks should be added to Meson, which usually comprises the following tasks: - Add a Meson build option to meson_options.txt. - Add support to the command line arg parser to handle any new `--enable-XXX`/`--disable-XXX` flags required by the feature. - Add information to the help output message to report on the new feature flag. - Add code to perform the actual feature check. - Add code to include the feature status in `config-host.h` - Add code to print out the feature status in the configure summary upon completion. Taking the probe for SDL as an example, we have the following pieces in configure:: # Initial variable state sdl=auto ..snip.. # Configure flag processing --disable-gnutls) sdl=disabled ;; --enable-gnutls) sdl=enabled ;; ..snip.. # Help output feature message sdl SDL UI ..snip.. # Meson invocation -Dsdl=$sdl In meson_options.txt:: option('sdl', type : 'feature', value : 'auto') In meson.build:: # Detect dependency sdl = dependency('sdl2', required: get_option('sdl'), static: enable_static) # Create config-host.h config_host_data.set('CONFIG_SDL', sdl.found()) # Summary summary_info += {'SDL support': sdl.found()} Helper functions ---------------- The configure script provides a variety of helper functions to assist developers in checking for system features: `do_cc $ARGS...` Attempt to run the system C compiler passing it $ARGS... `do_cxx $ARGS...` Attempt to run the system C++ compiler passing it $ARGS... `compile_object $CFLAGS` Attempt to compile a test program with the system C compiler using $CFLAGS. The test program must have been previously written to a file called $TMPC. `compile_prog $CFLAGS $LDFLAGS` Attempt to compile a test program with the system C compiler using $CFLAGS and link it with the system linker using $LDFLAGS. The test program must have been previously written to a file called $TMPC. `has $COMMAND` Determine if $COMMAND exists in the current environment, either as a shell builtin, or executable binary, returning 0 on success. `path_of $COMMAND` Return the fully qualified path of $COMMAND, printing it to stdout, and returning 0 on success. `check_define $NAME` Determine if the macro $NAME is defined by the system C compiler `check_include $NAME` Determine if the include $NAME file is available to the system C compiler `write_c_skeleton` Write a minimal C program main() function to the temporary file indicated by $TMPC `feature_not_found $NAME $REMEDY` Print a message to stderr that the feature $NAME was not available on the system, suggesting the user try $REMEDY to address the problem. `error_exit $MESSAGE $MORE...` Print $MESSAGE to stderr, followed by $MORE... and then exit from the configure script with non-zero status `query_pkg_config $ARGS...` Run pkg-config passing it $ARGS. If QEMU is doing a static build, then --static will be automatically added to $ARGS Stage 2: Meson ============== The Meson build system is currently used to describe the build process for: 1) executables, which include: - Tools - qemu-img, qemu-nbd, qga (guest agent), etc - System emulators - qemu-system-$ARCH - Userspace emulators - qemu-$ARCH - Some (but not all) unit tests 2) documentation 3) ROMs, which can be either installed as binary blobs or compiled 4) other data files, such as icons or desktop files The source code is highly modularized, split across many files to facilitate building of all of these components with as little duplicated compilation as possible. The Meson "sourceset" functionality is used to list the files and their dependency on various configuration symbols. Various subsystems that are common to both tools and emulators have their own sourceset, for example `block_ss` for the block device subsystem, `chardev_ss` for the character device subsystem, etc. These sourcesets are then turned into static libraries as follows:: libchardev = static_library('chardev', chardev_ss.sources(), name_suffix: 'fa', build_by_default: false) chardev = declare_dependency(link_whole: libchardev) The special `.fa` suffix is needed as long as unit tests are built with the older Makefile infrastructure, and will go away later. Files linked into emulator targets there can be split into two distinct groups of files, those which are independent of the QEMU emulation target and those which are dependent on the QEMU emulation target. In the target-independent set lives various general purpose helper code, such as error handling infrastructure, standard data structures, platform portability wrapper functions, etc. This code can be compiled once only and the .o files linked into all output binaries. Target-independent code lives in the `common_ss`, `softmmu_ss` and `user_ss` sourcesets. `common_ss` is linked into all emulators, `softmmu_ss` only in system emulators, `user_ss` only in user-mode emulators. In the target-dependent set lives CPU emulation, device emulation and much glue code. This sometimes also has to be compiled multiple times, once for each target being built. All binaries link with a static library `libqemuutil.a`, which is then linked to all the binaries. `libqemuutil.a` is built from several sourcesets; most of them however host generated code, and the only two of general interest are `util_ss` and `stub_ss`. The separation between these two is purely for documentation purposes. `util_ss` contains generic utility files. Even though this code is only linked in some binaries, sometimes it requires hooks only in some of these and depend on other functions that are not fully implemented by all QEMU binaries. `stub_ss` links dummy stubs that will only be linked into the binary if the real implementation is not present. In a way, the stubs can be thought of as a portable implementation of the weak symbols concept. The following files concur in the definition of which files are linked into each emulator: `default-configs/*.mak` The files under default-configs/ control what emulated hardware is built into each QEMU system and userspace emulator targets. They merely contain a list of config variable definitions like the machines that should be included. For example, default-configs/aarch64-softmmu.mak has:: include arm-softmmu.mak CONFIG_XLNX_ZYNQMP_ARM=y CONFIG_XLNX_VERSAL=y `*/Kconfig` These files are processed together with `default-configs/*.mak` and describe the dependencies between various features, subsystems and device models. They are described in kconfig.rst. These files rarely need changing unless new devices / hardware need to be enabled for a particular system/userspace emulation target Support scripts --------------- Meson has a special convention for invoking Python scripts: if their first line is `#! /usr/bin/env python3` and the file is *not* executable, find_program() arranges to invoke the script under the same Python interpreter that was used to invoke Meson. This is the most common and preferred way to invoke support scripts from Meson build files, because it automatically uses the value of configure's --python= option. In case the script is not written in Python, use a `#! /usr/bin/env ...` line and make the script executable. Scripts written in Python, where it is desirable to make the script executable (for example for test scripts that developers may want to invoke from the command line, such as tests/qapi-schema/test-qapi.py), should be invoked through the `python` variable in meson.build. For example:: test('QAPI schema regression tests', python, args: files('test-qapi.py'), env: test_env, suite: ['qapi-schema', 'qapi-frontend']) This is needed to obey the --python= option passed to the configure script, which may point to something other than the first python3 binary on the path. Stage 3: makefiles ================== The use of GNU make is required with the QEMU build system. The output of Meson is a build.ninja file, which is used with the Ninja build system. QEMU uses a different approach, where Makefile rules are synthesized from the build.ninja file. The main Makefile includes these rules and wraps them so that e.g. submodules are built before QEMU. The resulting build system is largely non-recursive in nature, in contrast to common practices seen with automake. Tests are also ran by the Makefile with the traditional `make check` phony target. Meson test suites such as `unit` can be ran with `make check-unit` too. It is also possible to run tests defined in meson.build with `meson test`. The following text is only relevant for unit tests which still have to be converted to Meson. All binaries should link to `libqemuutil.a`, e.g.: qemu-img$(EXESUF): qemu-img.o ..snip.. libqemuutil.a On Windows, all binaries have the suffix `.exe`, so all Makefile rules which create binaries must include the $(EXESUF) variable on the binary name. e.g. qemu-img$(EXESUF): qemu-img.o ..snip.. This expands to `.exe` on Windows, or an empty string on other platforms. Variable naming --------------- The QEMU convention is to define variables to list different groups of object files. These are named with the convention $PREFIX-obj-y. The Meson `chardev` variable in the previous example corresponds to a variable 'chardev-obj-y'. Likewise, tests that are executed by `make check-unit` are grouped into a variable check-unit-y, like this: check-unit-y += tests/test-visitor-serialization$(EXESUF) check-unit-y += tests/test-iov$(EXESUF) check-unit-y += tests/test-bitmap$(EXESUF) When a test or object file which needs to be conditionally built based on some characteristic of the host system, the configure script will define a variable for the conditional. For example, on Windows it will define $(CONFIG_POSIX) with a value of 'n' and $(CONFIG_WIN32) with a value of 'y'. It is now possible to use the config variables when listing object files. For example, check-unit-$(CONFIG_POSIX) += tests/test-vmstate$(EXESUF) On Windows this expands to check-unit-n += tests/vmstate.exe Since the `check-unit` target only runs tests included in `$(check-unit-y)`, POSIX specific tests listed in `$(util-obj-n)` are ignored on the Windows platform builds. CFLAGS / LDFLAGS / LIBS handling -------------------------------- There are many different binaries being built with differing purposes, and some of them might even be 3rd party libraries pulled in via git submodules. As such the use of the global CFLAGS variable is generally avoided in QEMU, since it would apply to too many build targets. Flags that are needed by any QEMU code (i.e. everything *except* GIT submodule projects) are put in $(QEMU_CFLAGS) variable. For linker flags the $(LIBS) variable is sometimes used, but a couple of more targeted variables are preferred. In addition to these variables, it is possible to provide cflags and libs against individual source code files, by defining variables of the form $FILENAME-cflags and $FILENAME-libs. For example, the test test-crypto-tlscredsx509 needs to link to the libtasn1 library, so tests/Makefile.include defines some variables: tests/crypto-tls-x509-helpers.o-cflags := $(TASN1_CFLAGS) tests/crypto-tls-x509-helpers.o-libs := $(TASN1_LIBS) The scope is a little different between the two variables. The libs get used when linking any target binary that includes the curl.o object file, while the cflags get used when compiling the curl.c file only. Important files for the build system ==================================== Statically defined files ------------------------ The following key files are statically defined in the source tree, with the rules needed to build QEMU. Their behaviour is influenced by a number of dynamically created files listed later. `Makefile` The main entry point used when invoking make to build all the components of QEMU. The default 'all' target will naturally result in the build of every component. Makefile takes care of recursively building submodules directly via a non-recursive set of rules. `*/meson.build` The meson.build file in the root directory is the main entry point for the Meson build system, and it coordinates the configuration and build of all executables. Build rules for various subdirectories are included in other meson.build files spread throughout the QEMU source tree. `rules.mak` This file provides the generic helper rules for invoking build tools, in particular the compiler and linker. `tests/Makefile.include` Rules for building the unit tests. This file is included directly by the top level Makefile, so anything defined in this file will influence the entire build system. Care needs to be taken when writing rules for tests to ensure they only apply to the unit test execution / build. `tests/docker/Makefile.include` Rules for Docker tests. Like tests/Makefile, this file is included directly by the top level Makefile, anything defined in this file will influence the entire build system. `tests/vm/Makefile.include` Rules for VM-based tests. Like tests/Makefile, this file is included directly by the top level Makefile, anything defined in this file will influence the entire build system. Dynamically created files ------------------------- The following files are generated dynamically by configure in order to control the behaviour of the statically defined makefiles. This avoids the need for QEMU makefiles to go through any pre-processing as seen with autotools, where Makefile.am generates Makefile.in which generates Makefile. Built by configure: `config-host.mak` When configure has determined the characteristics of the build host it will write a long list of variables to config-host.mak file. This provides the various install directories, compiler / linker flags and a variety of `CONFIG_*` variables related to optionally enabled features. This is imported by the top level Makefile and meson.build in order to tailor the build output. config-host.mak is also used as a dependency checking mechanism. If make sees that the modification timestamp on configure is newer than that on config-host.mak, then configure will be re-run. The variables defined here are those which are applicable to all QEMU build outputs. Variables which are potentially different for each emulator target are defined by the next file... `$TARGET-NAME/config-target.mak` TARGET-NAME is the name of a system or userspace emulator, for example, x86_64-softmmu denotes the system emulator for the x86_64 architecture. This file contains the variables which need to vary on a per-target basis. For example, it will indicate whether KVM or Xen are enabled for the target and any other potential custom libraries needed for linking the target. Built by Meson: `${TARGET-NAME}-config-devices.mak` TARGET-NAME is again the name of a system or userspace emulator. The config-devices.mak file is automatically generated by make using the scripts/make_device_config.sh program, feeding it the default-configs/$TARGET-NAME file as input. `config-host.h`, `$TARGET-NAME/config-target.h`, `$TARGET-NAME/config-devices.h` These files are used by source code to determine what features are enabled. They are generated from the contents of the corresponding `*.h` files using the scripts/create_config program. This extracts relevant variables and formats them as C preprocessor macros. `build.ninja` The build rules. Built by Makefile: `Makefile.ninja` A Makefile conversion of the build rules in build.ninja. The conversion is straightforward and, were it necessary to debug the rules produced by Meson, it should be enough to look at build.ninja. The conversion is performed by scripts/ninjatool.py. `Makefile.mtest` The Makefile definitions that let "make check" run tests defined in meson.build. The rules are produced from Meson's JSON description of tests (obtained with "meson introspect --tests") through the script scripts/mtest2make.py. Useful make targets ------------------- `help` Print a help message for the most common build targets. `print-VAR` Print the value of the variable VAR. Useful for debugging the build system.