Code for detecting and analyzing power faults on Witherspoon.

## To Build
```
To build this package, do the following steps:

    1. meson build
    2. ninja -C build

To clean the repository again run `rm -rf build`.
```

## Power Supply Monitor and Util JSON config

Several applications in this repository require a PSU JSON config to run.
The JSON config file provides information for:
* Where to access the pmbus attributes
* Which attribute file in pmbus maps to which property and interface in D-Bus
* Which kernel device directory is used on which PSU

There is an example [psu.json](example/psu.json) to describe the necessary
configurations.

* `inventoryPMBusAccessType` defines the pmbus access type, which tells the
   service which sysfs type to use to read the attributes.
   The possible values are:
   * Base: The base dir, e.g. `/sys/bus/i2c/devices/3-0069/`
   * Hwmon: The hwmon dir, e.g. `/sys/bus/i2c/devices/3-0069/hwmon/hwmonX/`
   * Debug: The pmbus debug dir, e.g. `/sys/kernel/debug/pmbus/hwmonX/`
   * DeviceDebug: The device debug dir, e.g. '/sys/kernel/debug/<driver>.<instance>/`
   * HwmonDeviceDebug: The hwmon device debug dir, e.g. `/sys/kernel/debug/pmbus/hwmonX/cffps1/`
* `fruConfigs` defines the mapping between the attribute file and the FRU
   inventory interface and property.
   The configuration example below indicates that the service will read
   `part_number` attribute file from a directory specified by the above pmbus
   access type, and assign to `PartNumber` property in
   `xyz.openbmc_project.Inventory.Decorator.Asset` interface.
   ```
     "fruConfigs": [
       {
         "propertyName": "PartNumber",
         "fileName": "part_number",
         "interface": "xyz.openbmc_project.Inventory.Decorator.Asset"
       }
     ]
   ```
* `psuDevices` defines the kernel device dir for each PSU in inventory.
   The configuration example below indicates that `powersupply0`'s device is
   located in `/sys/bus/i2c/devices/3-0069`.
   ```
     "psuDevices": {
       "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069",
     }
   ```