# Fan Presence Configuration File

## Table of Contents

- [Overview](#overview)
- [Data Format](#data-format)
- [Example](#example)
- [System Config Location](#system-config-location)
- [Contents](#contents)
- [Validation](#validation)
- [Firmware Updates](#firmware-updates)
- [Loading and Reloading](#loading-and-reloading)

## Overview

The `phosphor-fan-presence-tach` application is controlled by a configuration
file (config file) to manage the `Present` property's state on the
`xyz.openbmc_project.Inventory.Item` interface for fan inventory objects. The
config file defines the method(s) and policy(s) to use in determining the
presence of each fan within a machine.

## Data Format

The config file is written using the
[JSON (JavaScript Object Notation)](https://www.json.org/) data format and can
be created using a text editor.

## Example

See [config.json](../../presence/example/config.json).

## System Config Location

The config file name is `config.json`.

### Supported Directory

`/usr/share/phosphor-fan-presence/presence/`

The supported version of the config file is installed under this read-only
directory location as part of the firmware image install. This is where the
config file will be loaded from when no overriding config file exists.

#### Default Location

Where a single config file for 1-or-more system types can be used, the config
file can be located at the base of the supported directory.

i.e.) `/usr/share/phosphor-fan-presence/presence/config.json`

#### Compatible System Type Location

The config file location can also be based on a system type. This is necessary
where more than one type of machine is supported in a single BMC firmware image
and those system types can not share a common config file.

A system type sub-directory can be obtained from the
`Inventory.Decorator.Compatible` D-Bus interface's `Names` property. The
property holds a list of one or more compatible system types.

Example:

- `com.ampere.Hardware.Chassis.Model.MtJade`
- `com.ampere.Hardware.Chassis.Model.MtMitchell`

The `phosphor-fan-presence-tach` application then traverses the supported
directory, appending each compatible system type entry as a sub-directory on
each config file until it is found.

Example:

1. `/usr/share/phosphor-fan-presence/presence/com.ampere.Hardware.Chassis.Model.MtJade/`
   - (directory/config file does not exist)
2. `/usr/share/phosphor-fan-presence/presence/com.ampere.Hardware.Chassis.Model.MtMitchell/config.json`
   - (config file found)

If a config file is not found and the machine is powered on, an error is logged
and `phosphor-fan-presence-tach` application terminates preventing the machine
from successfully powering on.

### Override Directory

`/etc/phosphor-fan-presence/presence/`

A different version of the config file can be loaded by placing it into this
writable directory location. This avoids the need to build and install a new
firmware image on the BMC when changing the configuration, such as for testing
purposes.

The override directory may not exist on the BMC, therefore to be able to use an
overriding config file it must be created using the following command:

`mkdir -p /etc/phosphor-fan-presence/presence`

### Search Order

The `phosphor-fan-presence-tach` application will search for the config file at
the directory locations in the following order:

1. Override directory
2. Supported directory
   - Default location
   - Compatible System Type location

## Contents

### Structure

The config file consists of an array of fan objects that define how their
presence is detected and the policy used to update its present state within
inventory.

```json
[
  {
    "name": "fan0",
    "path": "/system/chassis/motherboard/fan0",
    "methods": [
      {
        "type": ...
      },
      .
      .
      .
    ],
    "rpolicy": {
        "type": ...
    }
  },
  .
  .
  .
]
```

### Syntax

Fan object attributes: **(Required unless otherwise noted)**

- [name](name.md)
- [path](path.md)
- [methods](methods.md)
- [rpolicy](rpolicy.md)
- [eeprom](eeprom.md) _optional_

### Comments

The JSON data format does not support comments. However, an optional `comments`
attribute name can be used to annotate any specific entry of the JSON
configuration. It is suggested that the value of this `comments` attribute be an
array of strings for comments containing line breaks. All `comments` objects are
ignored when the JSON configuration is processed.

**_Note: Only 1 `comments` object can exist at any given 'layer' of the
configuration hierarchy_**

Example:

```json
[
  {
    "comments": [
      "First fan in the system",
      "Uses two methods of presence detection"
    ],
    "name": "fan0",
    "path": "/system/chassis/motherboard/fan0",
    "methods": [
      {
        "comments": "Use GPIO for presence detection",
        "type": "gpio",
        .
        .
        .
      },
      {
        "comments": "Also use the tach for presence detection",
        "type": "tach",
        .
        .
        .
      }
    ],
    "rpolicy": {
        "type": ...
    }
  },
  .
  .
  .
]
```

## Validation

TBD

## Firmware Updates

When a new firmware image is installed on the BMC, it will update the config
file in the standard directory.

The override directory will **not** be modified by a firmware update. If a
config file exists in the override directory, it will continue to be used as the
fan presence configuration instead of the config file located under the
appropriate location within the supported directory.

## Loading and Reloading

The config file is loaded when the `phosphor-fan-presence-tach` application
starts.

To force the application to reload the config file, use the following command on
the BMC:

`systemctl kill -s HUP phosphor-fan-presence-tach@0.service`

To confirm which config file was loaded, use the following command on the BMC:

`journalctl -u phosphor-fan-presence-tach@0.service | grep Loading`