description: >
   Implementation of BMC state management.  When rebooting we are in
   transition.  When Ready all services required are running
   successfully.  When we are Not Ready this implies not all services
   have started that are required to be.

properties:
   - name: RequestedBMCTransition
     type: enum[self.Transition]
     default: 'None'
     description: >
         The desired BMC transition

   - name: CurrentBMCState
     type: enum[self.BMCState]
     description: >
         The current state of the BMC and is a read-only property.

   - name: LastRebootTime
     type: uint64
     description: >
        The last time at which the BMC came out of a reboot as
        determined by its uptime, in epoch time, in milliseconds.

   - name: LastRebootCause
     type: enum[self.RebootCause]
     default: 'Unknown'
     description: >
         The last BMC reboot cause

enumerations:
   - name: Transition
     description: >
       The desired transition for the BMC firmware
     values:
       - name: 'Reboot'
         description: >
           BMC system should be rebooted
       - name: 'HardReboot'
         description: >
           BMC system should be non-gracefully rebooted.
       - name: 'None'
         description: >
           No transition is in progress

   - name: BMCState
     description: >
       The current state of the BMC firmware
     values:
       - name: 'Ready'
         description: >
           Ready implies all services started and are running successfully
       - name: 'NotReady'
         description: >
           Not ready implies not all services have started or are not running successfully
       - name: 'UpdateInProgress'
         description: >
           UpdateInProgress implies BMC is in firmware update mode. CurrentBMCState
           will be set to "UpdateInProgress" while starting image download and
           reset to Ready, once activation is done or error case during update process.
       - name: 'Quiesced'
         description: >
           BMC firmware is quiesced. The BMC firmware is enabled but either
           unresponsive or only processing a restricted set of commands. This
           state may be the result of a service within the BMC going into a
           failed state.

   - name: RebootCause
     description: >
       The recorded reboot cause of the BMC
     values:
       - name: 'POR'
         description: >
           Last reboot is caused by Power-On-Reset
       - name: 'PinholeReset'
         description: >
           Last reboot is caused by pinhole reset
       - name: 'Watchdog'
         description: >
           Last reboot is caused by Watchdog
       - name: 'Unknown'
         description: >
           Last reboot is caused by Unknown