description: > This defines an ethernet interface. An object implementing this interface must implement xyz.openbmc_project.State.OperationalStatus. properties: - name: InterfaceName type: string description: > Name of the ethernet interface. - name: Speed type: uint32 description: > Current speed of the ethernet interface, in Mbps. - name: AutoNeg type: boolean description: > This indicates if the speed and duplex are automatically negotiated and configured on this ethernet interface. - name: MTU type: size default: 0 description: > This indicates the size in bytes of largest protocol data unit, which can be passed in an Ethernet frame on the interface. - name: DomainName type: array[string] description: > Domain names of the ethernet interface. - name: DHCPEnabled type: enum[self.DHCPConf] description: > Address mode of the ethernet interface. - name: Nameservers type: array[string] description: > DNS servers that are currently in use on this interface. errors: - xyz::openbmc_project.Common.Error.NotAllowed - name: StaticNameServers type: array[string] description: > A statically defined set of DNS server IP addresses to be used when DHCP provisioning is not enabled for name server configuration. As an implementation option this may also be used in addition to DHCP provided addresses, or in cases where the DHCP server provides no DNS assigments. errors: - xyz.openbmc_project.Common.Error.InvalidArgument - name: NTPServers type: array[string] description: > This property describes the NTP Servers on the interface. Implementation of this Dbus-interface is required to implement this property. This property supports read/write operation. Configure the NTP servers on the system during write operation. - name: LinkLocalAutoConf type: enum[self.LinkLocalConf] description: > This indicates link local auto configuration on this ethernet interface and configured on this ethernet interface. - name: IPv6AcceptRA type: boolean description: > Boolean for accepting router advertisements in IPv6 - name: NICEnabled type: boolean description: > Boolean for to enabling or disabling the ethernet port - name: LinkUp type: boolean flags: - const description: > This property reports the link status for the NIC. The read-only boolean value is TRUE when the network cable is inserted, or there is a carrier signal. It is FALSE when the cable is unplugged, or the carrier signal is missing. - name: DefaultGateway type: string description: > Default IPv4 gateway of the ethernet interface. errors: - xyz.openbmc_project.Common.Error.InvalidArgument - name: DefaultGateway6 type: string description: > Default IPv6 gateway of the ethernet interface. For supported address formats refer RFC 2373. Refer below man page for both v4 and v6 address format details https://man7.org/linux/man-pages/man3/inet_pton.3.html errors: - xyz.openbmc_project.Common.Error.InvalidArgument enumerations: - name: LinkLocalConf description: > Possible link local auto configuration values. values: - name: fallback - name: both - name: v4 - name: v6 - name: none - name: DHCPConf description: > A list of the permitted DHCP settings used by systemd. values: - name: both - name: v4 - name: v6 - name: none