description: >
    SOL properties use for Get/Set SOL config parameter command in host-ipmid
    sending config to SOL process in net-ipmid.
    Since some platforms need to access Get/Set SOL config parameter command
    through KCS, and current SOL manager is implemented in net-ipmid and
    cannot be accessed by host-ipmid, add a D-Bus interface for host-ipmid
    command to transfer properties to net-ipmid.
    This interface will be implemented in phosphor-settings.
properties:
    - name: Progress
      type: byte
      description: >
          Set In Progress property, indicate when any parameters are being
          updated.
    - name: Enable
      type: boolean
      description: >
          SOL Enable property, this controls whether the SOL payload type
          can be activated.
    - name: ForceEncryption
      type: boolean
      description: >
          If SOL enable Force Payload Encryption.
    - name: ForceAuthentication
      type: boolean
      description: >
          If SOL enable Force Payload Authentication
    - name: Privilege
      type: byte
      description: >
          Sets the minimum operating privilege level that is required to
          be able to activate SOL by Activate Payload command.
    - name: AccumulateIntervalMS
      type: byte
      description: >
          Character Accumulate Interval in 5ms increments.
          BMC will wait this time before transmitting a packet.
    - name: Threshold
      type: byte
      description: >
          BMC will automatically send an SOL character data packet containing
          this number of characters as soon as this number of characters
          (or greater) has been accepted from the baseboard serial controller.
    - name: RetryCount
      type: byte
      description: >
          Packet will be dropped if no ACK/NACK received by time retries
          expire.
    - name: RetryIntervalMS
      type: byte
      description: >
          Retry Interval in 10ms increments.