# https://github.com/openbmc/openbmc-test-automation/issues/822
-e Verify_Minimal_Memory_Buffer_Inventory
-e Verify_Minimal_Main_Planar_Inventory
-e Verify_Minimal_System_Inventory
# NA test case for Witherspoon
-e io_board_Present
-e io_board_Fault
# System LED test cases which are NA for Witherspoon system.
-e Test_Heartbeat_LED_And_Verify_Via_REST
-e Test_Beep_LED_And_Verify_Via_REST
-e Test_Identify_LED_And_Verify_Via_REST
# NXDMAENG UE error injection is not available in latest p9dd1ffdcv104.xlsm
-e Verify_Unrecoverable_Callout_Handling_For_NXDMAENG
# NA test case with nginx support.
-e Test_Non_SSL_Connection_To_Port_80
-e Test_Non_SSL_Connection_To_Port_443
# MRW changes required for this to work.
-e Test_GPU_SDR_Info_At_Power_On
# Core dump is disabled.
-e Verify_Core_Dump_Size
# Skip org code update.
-e Initiate_Code_Update_BMC
-e BIOS_Code_Update
-e Upload_Test
-e BMC_Code_Update
-e Host_Code_Update
-e BMC_Update_Recoverable_Error
-e Host_Update_Recoverable_Error
-e BMC_Multi_Code_Update
-e Host_Multi_Code_Update
-e Verify_IPMI_Disable_Policy_Post_BMC_Code_Update
# Others NA tests.
-e Run_Keyword_Pgm
# Factory reset must not run in CT.
-e Factory_Reset
-e Full_Suite_Regression
-e AC_Cycles
-e Network_Nping
# Multiple runs only needed for stability.
-e Run_Multiple_Power_Cycle
-e Run_Multiple_BMC_Reset_Via_REST
-e Run_Multiple_BMC_Reset_Via_Reboot
-e General_boot_testing
-e SLP_Service_Test
-e Check_Network_Latency
# TODO: Configure invalid IP address use cases.
-e Configure_Broadcast_IP
-e Configure_Multicast_IP
-e Configure_Loopback_IP
-e Configure_Network_ID
# TODO: Invalid gateway address configuration.
-e Configure_Broadcast_IP_For_Gateway
-e Configure_Loopback_IP_For_Gateway
-e Configure_Multicast_IP_For_Gateway
-e Configure_Network_ID_For_Gateway
-e Verify_Network_Interface_Recovery
# Skipping RAS test cases
-e Host_RAS
# Skip multi threading test causing XML parser failure.
-e Stress_BMC_REST_Server
-e Stress_BMC_SSH_Server
-e Stress_BMC_IPMI_Server
# Applicable only for master build.
-e Verify_eSEL_Description_And_EntryID_Using_REST
# Needs fix and improvement.
-e Test_SBE_Side_Switch
# IPMI disable and enable use cases.
-e Verify_Disabling_And_Enabling_IPMI_Via_Host
-e Verify_Disabling_IPMI_Via_OOB_IPMI
-e Verify_IPMI_Disable_Persistency_After_BMC_Reboot
# Remote logging
-e Verify_BMC_Journald_Contains_No_Credential_Data
# Non bmcweb certificate.
-e Certificate_Test