*** Settings *** Documentation This testing requires special setup where SNMP trapd is ... configured and installed. For download, installation and ... configuration refer http://www.net-snmp.org/. Resource ../../lib/snmp/resource.robot Resource ../../lib/snmp/redfish_snmp_utils.robot Resource ../../lib/bmc_redfish_resource.robot Resource ../../lib/openbmc_ffdc.robot Resource ../../lib/logging_utils.robot Test Teardown FFDC On Test Case Fail Suite Setup Suite Setup Execution *** Test Cases *** Configure SNMP Manager On BMC And Verify [Documentation] Configure SNMP manager on BMC via Redfish and verify. [Tags] Configure_SNMP_Manager_On_BMC_And_Verify [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} ${HTTP_CREATED} Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Configure SNMP Manager On BMC With Non Default Port And Verify [Documentation] Configure SNMP Manager On BMC And Verify. [Tags] Configure_SNMP_Manager_On_BMC_With_Non_Default_Port_And_Verify [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} ${HTTP_CREATED} Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} Configure SNMP Manager On BMC With Out Of Range Port And Verify [Documentation] Configure SNMP Manager On BMC with out-of range port and verify. [Tags] Configure_SNMP_Manager_On_BMC_With_Out_Of_Range_Port_And_Verify [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${out_of_range_port} Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${out_of_range_port} ${HTTP_BAD_REQUEST} ${status}= Run Keyword And Return Status ... Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${out_of_range_port} Should Be Equal As Strings ${status} False ... msg=BMC is allowing to configure out of range port. Generate Error On BMC And Verify SNMP Trap [Documentation] Generate error on BMC and verify trap and its fields. [Tags] Generate_Error_On_BMC_And_Verify_SNMP_Trap [Template] Create Error On BMC And Verify Trap # event_log expected_error # Generate internal failure error. ${CMD_INTERNAL_FAILURE} ${SNMP_TRAP_BMC_INTERNAL_FAILURE} # Generate timeout error. ${CMD_FRU_CALLOUT} ${SNMP_TRAP_BMC_CALLOUT_ERROR} # Generate informational error. ${CMD_INFORMATIONAL_ERROR} ${SNMP_TRAP_BMC_INFORMATIONAL_ERROR} Configure SNMP Manager On BMC With Alpha Port And Verify [Documentation] Configure SNMP Manager On BMC with alpha port and verify. [Tags] Configure_SNMP_Manager_On_BMC_With_Alpha_Port_And_Verify [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${alpha_port} Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${alpha_port} ${HTTP_BAD_REQUEST} ${status}= Run Keyword And Return Status ... Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${alpha_port} Should Be Equal As Strings ${status} False ... msg=BMC is allowing to configure invalid port. Configure SNMP Manager On BMC With Empty Port And Verify [Documentation] Configure SNMP Manager On BMC with empty port and verify ... SNMP manager gets configured with default port. [Tags] Configure_SNMP_Manager_On_BMC_With_Empty_Port_And_Verify [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${empty_port} Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Configure Multiple SNMP Managers And Verify [Documentation] Configure multiple SNMP managers and verify. [Tags] Configure_Multiple_SNMP_Managers_And_Verify [Teardown] Run Keywords ... Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} ... AND ... Delete SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Verify SNMP Manager Configured On BMC ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} Generate Error On BMC And Verify SNMP Trap Is Sent To Non-Default Port [Documentation] Generate error on BMC and verify trap and its fields. [Tags] Generate_Error_On_BMC_And_Verify_SNMP_Trap_Is_Sent_To_Non-Default_Port [Template] Create Error On BMC And Verify Trap On Non-Default Port # event_log expected_error # Generate internal failure error. ${CMD_INTERNAL_FAILURE} ${SNMP_TRAP_BMC_INTERNAL_FAILURE} # Generate timeout error. ${CMD_FRU_CALLOUT} ${SNMP_TRAP_BMC_CALLOUT_ERROR} # Generate informational error. ${CMD_INFORMATIONAL_ERROR} ${SNMP_TRAP_BMC_INFORMATIONAL_ERROR} Verify SNMP SysUpTime [Documentation] Verify SNMP SysUpTime. [Tags] Verify_SNMP_SysUpTime Generate Error And Verify System Up Time Verify SNMP SysUpTime On BMC Reboot [Documentation] Verify SNMP SysUpTime on BMC reboot. [Tags] Verify_SNMP_SysUpTime_On_BMC_Reboot # Reboot BMC to reset system uptime. OBMC Reboot (off) ${uptime}= Generate Error And Verify System Up Time # Check if uptime is reset after reboot. Should Be True ${uptime} <= 1 msg=SNMP SysUpTime is not reset on reboot Configure Multiple SNMP Managers With Non Default Port And Verify [Documentation] Configure multiple SNMP Managers with non-default port And Verify. [Tags] Configure_Multiple_SNMP_Managers_With_Non_Default_Port_And_Verify [Teardown] Run Keywords ... Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} ... AND ... Delete SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} # Configure multiple SNMP managers with non-default port. Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} Configure SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} # Verify if SNMP managers are configured. Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} Verify SNMP Manager Configured On BMC ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} Configure Multiple SNMP Managers With Different Ports And Verify [Documentation] Configure multiple SNMP Managers with different ports And Verify. [Tags] Configure_Multiple_SNMP_Managers_With_Different_Ports_And_Verify [Teardown] Run Keywords ... Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} ... AND ... Delete SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} ... AND ... Delete SNMP Manager Via Redfish ${SNMP_MGR3_IP} ${NON_DEFAULT_PORT2} # Configure multiple SNMP managers with different ports. Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} Configure SNMP Manager Via Redfish ${SNMP_MGR3_IP} ${NON_DEFAULT_PORT2} # Verify if SNMP managers are configured. Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Verify SNMP Manager Configured On BMC ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} Verify SNMP Manager Configured On BMC ${SNMP_MGR3_IP} ${NON_DEFAULT_PORT2} Configure SNMP Manager With Out Of Range IP On BMC And Verify [Documentation] Configure SNMP Manager On BMC with out-of range IP and expect an error. [Tags] Configure_SNMP_Manager_With_Out_Of_Range_IP_On_BMC_And_Verify [Teardown] Delete SNMP Manager Via Redfish ${out_of_range_ip} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${out_of_range_ip} ${SNMP_DEFAULT_PORT} ${HTTP_BAD_REQUEST} ${status}= Run Keyword And Return Status ... Verify SNMP Manager Configured On BMC ${out_of_range_ip} ${SNMP_DEFAULT_PORT} Should Be Equal As Strings ${status} False ... msg=BMC is allowing to configure out of range IP. Verify Persistency Of SNMP Manager And Trap On BMC Reboot [Documentation] Verify persistency of SNMP manager configuration on BMC ... and BMC is able to send trap after reboot. [Tags] Verify_Persistency_Of_SNMP_Manager_And_Trap_On_BMC_Reboot [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} ${HTTP_CREATED} # Reboot BMC and check persistency SNMP manager. OBMC Reboot (off) Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} # Check if trap is generated and sent to SNMP manager after reboot. Generate Error On BMC And Verify Trap ... ${CMD_INTERNAL_FAILURE} ${SNMP_TRAP_BMC_INTERNAL_FAILURE} Configure SNMP Manager With Less Octet IP And Verify [Documentation] Configure SNMP manager on BMC with less octet IP and expect an error. [Tags] Configure_SNMP_Manager_With_Less_Octet_IP_And_Verify [Teardown] Delete SNMP Manager Via Redfish ${less_octet_ip} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${less_octet_ip} ${SNMP_DEFAULT_PORT} ${HTTP_BAD_REQUEST} ${status}= Run Keyword And Return Status ... Verify SNMP Manager Configured On BMC ${less_octet_ip} ${SNMP_DEFAULT_PORT} Should Be Equal As Strings ${status} False ... msg=BMC is allowing to configure less octet IP. Configure SNMP Manager On BMC With Negative Port And Verify [Documentation] Configure SNMP Manager On BMC with negative port and verify. [Tags] Configure_SNMP_Manager_On_BMC_With_Negative_Port_And_Verify [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${negative_port} Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${negative_port} ${HTTP_BAD_REQUEST} ${status}= Run Keyword And Return Status ... Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${negative_port} Should Be Equal As Strings ${status} False ... msg=BMC is allowing to configure negative port. Configure Multiple SNMP Managers On BMC And Verify Persistency On BMC Reboot [Documentation] Configure multiple SNMP Managers on BMC and verify persistency on BMC reboot. [Tags] Configure_Multiple_SNMP_Managers_On_BMC_And_Verify_Persistency_On_BMC_Reboot [Teardown] Run Keywords ... Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} ... AND ... Delete SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} # Reboot BMC and check persistency SNMP manager. OBMC Reboot (off) Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Verify SNMP Manager Configured On BMC ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} Configure Multiple SNMP Managers On BMC And Check Trap On BMC Reboot [Documentation] Configure multiple SNMP Managers on BMC and check trap on BMC reboot. [Tags] Configure_Multiple_SNMP_Managers_On_BMC_And_Check_Trap_On_BMC_Reboot [Teardown] Run Keywords ... Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} ... AND ... Delete SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Configure SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} # Reboot BMC and check persistency SNMP manager. OBMC Reboot (off) Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Verify SNMP Manager Configured On BMC ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} # Check if trap is generated and sent to SNMP managers after reboot. Generate Error On BMC And Verify Trap ... ${CMD_INTERNAL_FAILURE} ${SNMP_TRAP_BMC_INTERNAL_FAILURE} *** Keywords *** Suite Setup Execution [Documentation] Do suite setup execution. Redfish.Login # Check for SNMP configurations. Valid Value SNMP_MGR1_IP Valid Value SNMP_DEFAULT_PORT Generate Error And Verify System Up Time [Documentation] Generate error and verify system up time. # Get system uptime on BMC. # Example output of uptime: # (8055.79 15032.86) ${cmd_output} ${stderr} ${rc}= BMC Execute Command cat /proc/uptime @{times}= Split String ${cmd_output} ${bmc_uptime_in_minutes}= Evaluate int(${times}[0])/60 ${trap}= Create Error On BMC And Verify Trap # Extract System up time from SNMP trap. # Example - SNMP trap: # DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (252367) 0:42:03.67 # SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.49871.1.0.0.1 # SNMPv2-SMI::enterprises.49871.1.0.1.1 = Gauge32: 54 # SNMPv2-SMI::enterprises.49871.1.0.1.2 = Opaque: UInt64: 4622921648578756984 # SNMPv2-SMI::enterprises.49871.1.0.1.3 = INTEGER: 3 # SNMPv2-SMI::enterprises.49871.1.0.1.4 = STRING: @{words}= Split String ${trap}[0] = ${timeticks}= Fetch From Right ${words}[1] ( ${snmp_sysuptime}= Fetch From Left ${timeticks} ) # SNMP SysUptime will be in milli seconds. # Convert into minutes. ${sysuptime_in_minutes}= Evaluate int(${snmp_sysuptime})/6000 Should Be Equal As Integers ${bmc_uptime_in_minutes} ${sysuptime_in_minutes} [Return] ${sysuptime_in_minutes}