*** Settings *** Documentation VMI static/dynamic IP config and certificate exchange tests. Resource ../../lib/resource.robot Resource ../../lib/bmc_redfish_resource.robot Resource ../../lib/openbmc_ffdc.robot Library ../../lib/bmc_network_utils.py Suite Setup Redfish.Login Test Teardown FFDC On Test Case Fail Suite Teardown Redfish.Logout *** Variables *** ${test_ipv4} 10.10.20.30 ${test_gateway} 0.0.0.0 ${test_netmask} 255.255.252.0 &{DHCP_ENABLED} DHCPEnabled=${${True}} &{DHCP_DISABLED} DHCPEnabled=${${False}} &{ENABLE_DHCP} DHCPv4=&{DHCP_ENABLED} &{DISABLE_DHCP} DHCPv4=&{DHCP_DISABLED} *** Test Cases *** Verify All VMI EthernetInterfaces [Documentation] Verify all VMI ethernet interfaces. [Tags] Verify_All_VMI_EthernetINterfaces Verify VMI EthernetInterfaces Verify Existing VMI Network Interface Details [Documentation] Verify existing VMI network interface details. [Tags] Verify_VMI_Network_Interface_Details ${vmi_ip}= Get VMI Network Interface Details ${origin}= Set Variable If ${vmi_ip["DHCPv4"]} == ${False} Static DHCP Should Not Be Equal ${vmi_ip["DHCPv4"]} ${vmi_ip["IPv4StaticAddresses"]} Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]} Should Be Equal As Strings ${vmi_ip["Id"]} intf0 Should Be Equal As Strings ${vmi_ip["Description"]} ... Ethernet Interface for Virtual Management Interface Should Be Equal As Strings ${vmi_ip["Name"]} Virtual Management Interface Should Be True ${vmi_ip["InterfaceEnabled"]} Delete Existing Static VMI IP Address [Documentation] Delete existing static VMI IP address. [Tags] Delete_Existing_Static_VMI_IP_Address ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled Run Keyword If ${curr_origin} == ${True} Set VMI IPv4 Origin ${False} ${HTTP_ACCEPTED} Delete VMI IPv4 Address IPv4StaticAddresses valid_status_code=${HTTP_ACCEPTED} ${default}= Set Variable 0.0.0.0 Verify VMI Network Interface Details ${default} Static ${default} ${default} ${True} Verify User Cannot Delete ReadOnly Property IPv4Addresses [Documentation] Verify user cannot delete readonly property IPv4Addresses. [Tags] Verify_User_Cannot_Delete_ReadOnly_Property_IPv4Addresses ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled Run Keyword If ${curr_origin} == ${False} Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_BAD_REQUEST} Assign Valid And Invalid Static IPv4 Address To VMI [Documentation] Assign static IPv4 address to VMI. [Tags] Assign_Valid_And_Invalid_Static_IPv4_Address_To_VMI [Template] Verify Assigning Static IPv4 Address To VMI [Teardown] Delete VMI IPv4 Address IPv4Addresses ${HTTP_ACCEPTED} # ip gateway netmask del_curr_ip host_reboot valid_status_code 10.5.20.30 0.0.0.0 255.255.252.0 ${False} ${True} ${HTTP_ACCEPTED} a.3.118.94 0.0.0.0 255.255.252.0 ${False} ${False} ${HTTP_BAD_REQUEST} Add Multiple IP Addreses On VMI Interface And Verify [Documentation] Add multiple IP addreses on VMI interface and verify. [Tags] Add_Multiple_IP_Addreses_On_VMI_Interface_And_Verify [Teardown] Run Keywords Delete VMI IPv4 Address IPv4Addresses AND Test Teardown ${ip1}= Create dictionary Address=10.5.5.10 SubnetMask=255.255.252.0 Gateway=0.0.0.0 ${ip2}= Create dictionary Address=10.5.5.11 SubnetMask=255.255.252.0 Gateway=0.0.0.0 ${ip3}= Create dictionary Address=10.5.5.12 SubnetMask=255.255.252.0 Gateway=0.0.0.0 ${ips}= Create List ${ip1} ${ip2} ${ip3} ${active_channel_config}= Get Active Channel Config Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} ... body={'IPv4StaticAddresses':${ips}} valid_status_codes=[${HTTP_ACCEPTED}] Verify VMI Network Interface Details ${ip1["Address"]} Static ${ip1["Gateway"]} ${ip1["SubnetMask"]} ${True} Modify IP Addresses On VMI Interface And Verify [Documentation] Modify IP addresses on VMI interface and verify. [Tags] Modify_IP_Addresses_On_VMI_Interface_And_Verify [Template] Verify Assigning Static IPv4 Address To VMI [Teardown] Run keywords Delete VMI IPv4 Address IPv4Addresses AND Test Teardown # ip gateway netmask del_curr_ip host_reboot valid_status_code 10.5.5.10 0.0.0.0 255.255.252.0 ${False} ${True} ${HTTP_ACCEPTED} 10.5.5.11 0.0.0.0 255.255.252.0 ${False} ${True} ${HTTP_ACCEPTED} Switch Between IP Origins On VMI And Verify Details [Documentation] Switch between IP origins on VMI and verify details. [Tags] Switch_Between_IP_Origins_On_VMI_And_Verify_Details Switch VMI IPv4 Origin And Verify Details Switch VMI IPv4 Origin And Verify Details Verify Persistency Of VMI IPv4 Details After Host Reboot [Documentation] Verify persistency of VMI IPv4 details after host reboot. [Tags] Verify_Persistency_Of_VMI_IPv4_Details_After_Host_Reboot # Verifying persistency of dynamic address. Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} ${default}= Set Variable 0.0.0.0 Verify VMI Network Interface Details ${default} DHCP ${default} ${default} ${True} Verify VMI Network Interface Details ${default} DHCP ${default} ${default} ${True} # Verifying persistency of static address. Switch VMI IPv4 Origin And Verify Details ${True} Verify Assigning Static IPv4 Address To VMI ${VMI_IP} ${VMI_GATEWAY} ${VMI_NETMASK} ${False} Verify VMI Network Interface Details ${VMI_IP} Static ${VMI_GATEWAY} ${VMI_NETMASK} ${True} Delete VMI Static IP Address And Verify [Documentation] Delete VMI static IP address and verify. [Tags] Delete_VMI_Static_IP_Address_And_Verify Set Static IPv4 Address To VMI 10.10.20.30 0.0.0.0 255.255.252.0 Verify VMI Network Interface Details 10.10.20.30 Static 0.0.0.0 255.255.252.0 ${True} Delete VMI IPv4 Address IPv4Addresses ${HTTP_ACCEPTED} ${active_channel_config}= Get Active Channel Config ${resp}= Redfish.Get ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} Should Be Empty ${resp.dict["IPv4Addresses"]} Verify Successful VMI IP Static Configuration On HOST Boot After Session Delete [Documentation] Verify VMI IP static Configuration On HOST Boot After session deleted. [Tags] Verify_Successful_VMI_IP_Static_Configuration_On_HOST_Boot_After_Session_Delete [Teardown] Run keywords Delete VMI IPv4 Address IPv4Addresses AND Test Teardown Set Static IPv4 Address To VMI ${test_ipv4} ${test_gateway} ${test_netmask} ${session_info}= Get Redfish Session Info Redfish.Delete ${session_info["location"]} # Create a new Redfish session Run Keywords Redfish Power Off AND Redfish Power On AND Redfish.Login Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} Verify Persistency Of VMI DHCP IP Configuration After Multiple HOST Reboots [Documentation] Verify Persistency Of VMI DHCP IP configuration After Multiple HOST Reboots [Tags] Verify_Persistency_Of_VMI_DHCP_IP_Configuration_After_Multiple_HOST_Reboots ${LOOP_COUNT}= Set Variable ${3} Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} Run Keywords Redfish Power Off AND Redfish Power On ${vmi_ip_config}= Get VMI Network Interface Details # Verifying persistency of dynamic address after multiple reboots. Repeat Keyword ${LOOP_COUNT} times ... Verify VMI Network Interface Details ${vmi_ip_config["IPv4_Address"]} DHCP ${vmi_ip_config["IPv4_Gateway"]} ... ${vmi_ip_config["IPv4_SubnetMask"]} ${True} Verify VMI Static IP Configuration Persist On BMC Reset Before Host Boot [Documentation] Verify VMI static IP configuration persist on BMC reset. [Tags] Verify_VMI_Static_IP_Configuration_Persist_On_BMC_Reset_Before_Host_Boot [Teardown] Run keywords Delete VMI IPv4 Address IPv4Addresses AND Test Teardown Set Static IPv4 Address To VMI ${test_ipv4} ${test_gateway} ${test_netmask} Run keywords Redfish OBMC Reboot (off) AND Redfish Power On # Verifying the VMI static configuration Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} *** Keywords *** Get VMI Network Interface Details [Documentation] Get VMI network interface details. [Arguments] ${valid_status_code}=${HTTP_OK} # Description of argument(s): # valid_status_code Expected valid status code from GET request. # Note: It returns a dictionary of VMI eth0 parameters. ${active_channel_config}= Get Active Channel Config ${resp}= Redfish.Get ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} ... valid_status_codes=[${valid_status_code}] ${ip_resp}= Evaluate json.loads('''${resp.text}''') json ${static_exists}= Run Keyword And Ignore Error ... Set Variable ${ip_resp["IPv4StaticAddresses"][0]["Address"]} ${static_exists}= Set Variable If '${static_exists[0]}' == 'PASS' ${True} ${False} ${vmi_ip}= Create Dictionary DHCPv4=${${ip_resp["DHCPv4"]["DHCPEnabled"]}} Id=${ip_resp["Id"]} ... Description=${ip_resp["Description"]} IPv4_Address=${ip_resp["IPv4Addresses"][0]["Address"]} ... IPv4_AddressOrigin=${ip_resp["IPv4Addresses"][0]["AddressOrigin"]} Name=${ip_resp["Name"]} ... IPv4_Gateway=${ip_resp["IPv4Addresses"][0]["Gateway"]} ... InterfaceEnabled=${${ip_resp["InterfaceEnabled"]}} ... IPv4_SubnetMask=${ip_resp["IPv4Addresses"][0]["SubnetMask"]} MACAddress=${ip_resp["MACAddress"]} ... IPv4StaticAddresses=${${static_exists}} [Return] &{vmi_ip} Get Immediate Child Parameter From VMI Network Interface [Documentation] Get immediate child parameter from VMI network interface. [Arguments] ${parameter} ${valid_status_code}=${HTTP_OK} # Description of argument(s): # parameter parameter for which value is required. Ex: DHCPEnabled, MACAddress etc. # valid_status_code Expected valid status code from GET request. ${active_channel_config}= Get Active Channel Config ${resp}= Redfish.Get ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} ... valid_status_codes=[${valid_status_code}] ${ip_resp}= Evaluate json.loads('''${resp.text}''') json ${value}= Set Variable If '${parameter}' != 'DHCPEnabled' ${ip_resp["${parameter}"]} ... ${ip_resp["DHCPv4"]["${parameter}"]} [Return] ${value} Verify VMI EthernetInterfaces [Documentation] Verify VMI ethernet interfaces. [Arguments] ${valid_status_code}=${HTTP_OK} # Description of argument(s): # valid_status_code Expected valid status code from GET request. ${resp}= Redfish.Get /redfish/v1/Systems/hypervisor/EthernetInterfaces ... valid_status_codes=[${valid_status_code}] ${resp}= Evaluate json.loads('''${resp.text}''') json ${interfaces}= Set Variable ${resp["Members"]} Should Be Equal As Strings ${interfaces[0]}[@odata.id] ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 Should Be Equal As Strings ${interfaces[1]}[@odata.id] ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth1 Should Be Equal ${resp["Members@odata.count"]} ${2} Verify VMI Network Interface Details [Documentation] Verify VMI network interface details. [Arguments] ${ip} ${origin} ${gateway} ${netmask} ... ${host_reboot}=${False} ${valid_status_code}=${HTTP_OK} # Description of argument(s): # ip VMI IPv4 address. # origin Origin of IPv4 address eg. Static or DHCP. # gateway Gateway for VMI IP. # netmask Subnetmask for VMI IP. # valid_status_code Expected valid status code from GET request. Default is HTTP_OK. # host_reboot Reboot HOST if True. Run Keyword If ${host_reboot} == ${True} Run Keywords ... Redfish Power Off AND Redfish Power On AND Redfish.Login ${vmi_ip}= Get VMI Network Interface Details ${valid_status_code} Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]} Should Be Equal As Strings ${gateway} ${vmi_ip["IPv4_Gateway"]} Should Be Equal As Strings ${netmask} ${vmi_ip["IPv4_SubnetMask"]} Should Be Equal As Strings ${ip} ${vmi_ip["IPv4_Address"]} Set Static IPv4 Address To VMI [Documentation] Set static IPv4 address to VMI. [Arguments] ${ip} ${gateway} ${netmask} ${valid_status_code}=${HTTP_ACCEPTED} # Description of argument(s): # ip VMI IPv4 address. # gateway Gateway for VMI IP. # netmask Subnetmask for VMI IP. # valid_status_code Expected valid status code from GET request. Default is HTTP_ACCEPTED. ${data}= Set Variable ... {"IPv4StaticAddresses": [{"Address": "${ip}","SubnetMask": "${netmask}","Gateway": "${gateway}"}]} ${active_channel_config}= Get Active Channel Config ${resp}= Redfish.Patch ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} ... body=${data} valid_status_codes=[${valid_status_code}] Log To Console ${resp.text} Verify Assigning Static IPv4 Address To VMI [Documentation] Verify assigning static IPv4 address to VMI. [Arguments] ${ip} ${gateway} ${netmask} ${del_curr_ip}=${True} ${host_reboot}=${True} ... ${valid_status_code}=${HTTP_ACCEPTED} # Description of argument(s): # ip VMI IPv4 address. # gateway Gateway for VMI IP. # netmask Subnetmask for VMI IP. # del_curr_ip Delete current VMI static IP if True. # host_reboot True when HOST reboot is required. # valid_status_code Expected valid status code from GET request. Default is HTTP_ACCEPTED. # Delete current static IP based on user input. ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled Run Keyword If ${curr_origin} == ${False} and ${del_curr_ip} == ${True} Delete VMI IPv4 Address Set Static IPv4 Address To VMI ${ip} ${gateway} ${netmask} valid_status_code=${valid_status_code} Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} Verify VMI Network Interface Details ${ip} Static ${gateway} ${netmask} host_reboot=${host_reboot} Delete VMI IPv4 Address [Documentation] Delete VMI IPv4 address. [Arguments] ${delete_param}=IPv4StaticAddresses ${valid_status_code}=${HTTP_ACCEPTED} # Description of argument(s): # delete_param Parameter to be deleted eg. IPv4StaticAddresses or IPv4Addresses. # Default is IPv4StaticAddresses. # valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK. ${data}= Set Variable {"${delete_param}": [${Null}]} ${active_channel_config}= Get Active Channel Config ${resp}= Redfish.Patch ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} ... body=${data} valid_status_codes=[${valid_status_code}] Set VMI IPv4 Origin [Documentation] Set VMI IPv4 origin. [Arguments] ${dhcp_enabled}=${False} ${valid_status_code}=${HTTP_ACCEPTED} # Description of argument(s): # dhcp_enabled True if user wants to enable DHCP. Default is Static, hence value is set to False. # valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK. ${data}= Set Variable If ${dhcp_enabled} == ${False} ${DISABLE_DHCP} ${ENABLE_DHCP} ${resp}= Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 body=${data} ... valid_status_codes=[${valid_status_code}] Switch VMI IPv4 Origin And Verify Details [Documentation] Switch VMI IPv4 origin and verify details. [Arguments] ${host_reboot}=${False} # Description of argument(s): # host_reboot Reboot HOST if True. ${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled ${dhcp_enabled}= Set Variable If ${curr_mode} == ${False} ${True} ${False} ${default}= Set Variable 0.0.0.0 ${origin}= Set Variable If ${curr_mode} == ${False} DHCP Static Set VMI IPv4 Origin ${dhcp_enabled} ${HTTP_ACCEPTED} Verify VMI Network Interface Details ${default} ${origin} ${default} ${default} ${host_reboot} [Return] ${origin}