#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # +-----------------------+ +------------------------+ # | H1 (vrf) | | H2 (vrf) | # | + $h1.10 | | + $h2.10 | # | | 192.0.2.1/28 | | | 192.0.2.2/28 | # | | 2001:db8:1::1/64 | | | 2001:db8:1::2/64 | # | | | | | | # | | + $h1.20 | | | + $h2.20 | # | \ | 198.51.100.1/24 | | \ | 198.51.100.2/24 | # | \ | 2001:db8:2::1/64 | | \ | 2001:db8:2::2/64 | # | \| | | \| | # | + $h1 | | + $h2 | # +----|------------------+ +----|-------------------+ # | | # +----|--------------------------------------------------|-------------------+ # | SW | | | # | +--|--------------------------------------------------|-----------------+ | # | | + $swp1 BR0 (802.1q) + $swp2 | | # | | vid 10 vid 10 | | # | | vid 20 vid 20 | | # | | | | # | +-----------------------------------------------------------------------+ | # +---------------------------------------------------------------------------+ ALL_TESTS=" cfg_test fwd_test ctrl_test " NUM_NETIFS=4 source lib.sh source tc_common.sh h1_create() { simple_if_init $h1 vlan_create $h1 10 v$h1 192.0.2.1/28 2001:db8:1::1/64 vlan_create $h1 20 v$h1 198.51.100.1/24 2001:db8:2::1/64 } h1_destroy() { vlan_destroy $h1 20 vlan_destroy $h1 10 simple_if_fini $h1 } h2_create() { simple_if_init $h2 vlan_create $h2 10 v$h2 192.0.2.2/28 vlan_create $h2 20 v$h2 198.51.100.2/24 } h2_destroy() { vlan_destroy $h2 20 vlan_destroy $h2 10 simple_if_fini $h2 } switch_create() { ip link add name br0 type bridge vlan_filtering 1 vlan_default_pvid 0 \ mcast_snooping 1 mcast_igmp_version 3 mcast_mld_version 2 bridge vlan add vid 10 dev br0 self bridge vlan add vid 20 dev br0 self ip link set dev br0 up ip link set dev $swp1 master br0 ip link set dev $swp1 up bridge vlan add vid 10 dev $swp1 bridge vlan add vid 20 dev $swp1 ip link set dev $swp2 master br0 ip link set dev $swp2 up bridge vlan add vid 10 dev $swp2 bridge vlan add vid 20 dev $swp2 tc qdisc add dev br0 clsact tc qdisc add dev $h2 clsact } switch_destroy() { tc qdisc del dev $h2 clsact tc qdisc del dev br0 clsact bridge vlan del vid 20 dev $swp2 bridge vlan del vid 10 dev $swp2 ip link set dev $swp2 down ip link set dev $swp2 nomaster bridge vlan del vid 20 dev $swp1 bridge vlan del vid 10 dev $swp1 ip link set dev $swp1 down ip link set dev $swp1 nomaster ip link set dev br0 down bridge vlan del vid 20 dev br0 self bridge vlan del vid 10 dev br0 self ip link del dev br0 } setup_prepare() { h1=${NETIFS[p1]} swp1=${NETIFS[p2]} swp2=${NETIFS[p3]} h2=${NETIFS[p4]} vrf_prepare forwarding_enable h1_create h2_create switch_create } cleanup() { pre_cleanup switch_destroy h2_destroy h1_destroy forwarding_restore vrf_cleanup } cfg_test_host_common() { local name=$1; shift local grp=$1; shift local src=$1; shift local state=$1; shift local invalid_state=$1; shift RET=0 # Check basic add, replace and delete behavior. bridge mdb add dev br0 port br0 grp $grp $state vid 10 bridge mdb show dev br0 vid 10 | grep -q "$grp" check_err $? "Failed to add $name host entry" bridge mdb replace dev br0 port br0 grp $grp $state vid 10 &> /dev/null check_fail $? "Managed to replace $name host entry" bridge mdb del dev br0 port br0 grp $grp $state vid 10 bridge mdb show dev br0 vid 10 | grep -q "$grp" check_fail $? "Failed to delete $name host entry" # Check error cases. bridge mdb add dev br0 port br0 grp $grp $invalid_state vid 10 \ &> /dev/null check_fail $? "Managed to add $name host entry with a $invalid_state state" bridge mdb add dev br0 port br0 grp $grp src $src $state vid 10 \ &> /dev/null check_fail $? "Managed to add $name host entry with a source" bridge mdb add dev br0 port br0 grp $grp $state vid 10 \ filter_mode exclude &> /dev/null check_fail $? "Managed to add $name host entry with a filter mode" bridge mdb add dev br0 port br0 grp $grp $state vid 10 \ source_list $src &> /dev/null check_fail $? "Managed to add $name host entry with a source list" bridge mdb add dev br0 port br0 grp $grp $state vid 10 \ proto 123 &> /dev/null check_fail $? "Managed to add $name host entry with a protocol" log_test "Common host entries configuration tests ($name)" } # Check configuration of host entries from all types. cfg_test_host() { echo log_info "# Host entries configuration tests" cfg_test_host_common "IPv4" "239.1.1.1" "192.0.2.1" "temp" "permanent" cfg_test_host_common "IPv6" "ff0e::1" "2001:db8:1::1" "temp" "permanent" cfg_test_host_common "L2" "01:02:03:04:05:06" "00:00:00:00:00:01" \ "permanent" "temp" } cfg_test_port_common() { local name=$1;shift local grp_key=$1; shift RET=0 # Check basic add, replace and delete behavior. bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 bridge mdb show dev br0 vid 10 | grep -q "$grp_key" check_err $? "Failed to add $name entry" bridge mdb replace dev br0 port $swp1 $grp_key permanent vid 10 \ &> /dev/null check_err $? "Failed to replace $name entry" bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10 bridge mdb show dev br0 vid 10 | grep -q "$grp_key" check_fail $? "Failed to delete $name entry" # Check default protocol and replacement. bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "static" check_err $? "$name entry not added with default \"static\" protocol" bridge mdb replace dev br0 port $swp1 $grp_key permanent vid 10 \ proto 123 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "123" check_err $? "Failed to replace protocol of $name entry" bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10 # Check behavior when VLAN is not specified. bridge mdb add dev br0 port $swp1 $grp_key permanent bridge mdb show dev br0 vid 10 | grep -q "$grp_key" check_err $? "$name entry with VLAN 10 not added when VLAN was not specified" bridge mdb show dev br0 vid 20 | grep -q "$grp_key" check_err $? "$name entry with VLAN 20 not added when VLAN was not specified" bridge mdb del dev br0 port $swp1 $grp_key permanent bridge mdb show dev br0 vid 10 | grep -q "$grp_key" check_fail $? "$name entry with VLAN 10 not deleted when VLAN was not specified" bridge mdb show dev br0 vid 20 | grep -q "$grp_key" check_fail $? "$name entry with VLAN 20 not deleted when VLAN was not specified" # Check behavior when bridge port is down. ip link set dev $swp1 down bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 check_err $? "Failed to add $name permanent entry when bridge port is down" bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10 bridge mdb add dev br0 port $swp1 $grp_key temp vid 10 &> /dev/null check_fail $? "Managed to add $name temporary entry when bridge port is down" ip link set dev $swp1 up setup_wait_dev $swp1 # Check error cases. ip link set dev br0 down bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 \ &> /dev/null check_fail $? "Managed to add $name entry when bridge is down" ip link set dev br0 up ip link set dev br0 type bridge mcast_snooping 0 bridge mdb add dev br0 port $swp1 $grp_key permanent vid \ 10 &> /dev/null check_fail $? "Managed to add $name entry when multicast snooping is disabled" ip link set dev br0 type bridge mcast_snooping 1 bridge mdb add dev br0 port $swp1 $grp_key permanent vid 5000 \ &> /dev/null check_fail $? "Managed to add $name entry with an invalid VLAN" log_test "Common port group entries configuration tests ($name)" } src_list_create() { local src_prefix=$1; shift local num_srcs=$1; shift local src_list local i for i in $(seq 1 $num_srcs); do src_list=${src_list},${src_prefix}${i} done echo $src_list | cut -c 2- } __cfg_test_port_ip_star_g() { local name=$1; shift local grp=$1; shift local invalid_grp=$1; shift local src_prefix=$1; shift local src1=${src_prefix}1 local src2=${src_prefix}2 local src3=${src_prefix}3 local max_srcs=31 local num_srcs RET=0 bridge mdb add dev br0 port $swp1 grp $grp vid 10 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "exclude" check_err $? "Default filter mode is not \"exclude\"" bridge mdb del dev br0 port $swp1 grp $grp vid 10 # Check basic add and delete behavior. bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \ source_list $src1 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q -v "src" check_err $? "(*, G) entry not created" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1" check_err $? "(S, G) entry not created" bridge mdb del dev br0 port $swp1 grp $grp vid 10 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q -v "src" check_fail $? "(*, G) entry not deleted" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1" check_fail $? "(S, G) entry not deleted" ## State (permanent / temp) tests. # Check that group and source timer are not set for permanent entries. bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \ filter_mode exclude source_list $src1 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "permanent" check_err $? "(*, G) entry not added as \"permanent\" when should" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q "permanent" check_err $? "(S, G) entry not added as \"permanent\" when should" bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q " 0.00" check_err $? "(*, G) \"permanent\" entry has a pending group timer" bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "\/0.00" check_err $? "\"permanent\" source entry has a pending source timer" bridge mdb del dev br0 port $swp1 grp $grp vid 10 # Check that group timer is set for temporary (*, G) EXCLUDE, but not # the source timer. bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode exclude source_list $src1 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "temp" check_err $? "(*, G) EXCLUDE entry not added as \"temp\" when should" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q "temp" check_err $? "(S, G) \"blocked\" entry not added as \"temp\" when should" bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q " 0.00" check_fail $? "(*, G) EXCLUDE entry does not have a pending group timer" bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "\/0.00" check_err $? "\"blocked\" source entry has a pending source timer" bridge mdb del dev br0 port $swp1 grp $grp vid 10 # Check that group timer is not set for temporary (*, G) INCLUDE, but # that the source timer is set. bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode include source_list $src1 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "temp" check_err $? "(*, G) INCLUDE entry not added as \"temp\" when should" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q "temp" check_err $? "(S, G) entry not added as \"temp\" when should" bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q " 0.00" check_err $? "(*, G) INCLUDE entry has a pending group timer" bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "\/0.00" check_fail $? "Source entry does not have a pending source timer" bridge mdb del dev br0 port $swp1 grp $grp vid 10 # Check that group timer is never set for (S, G) entries. bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode include source_list $src1 bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q " 0.00" check_err $? "(S, G) entry has a pending group timer" bridge mdb del dev br0 port $swp1 grp $grp vid 10 ## Filter mode (include / exclude) tests. # Check that (*, G) INCLUDE entries are added with correct filter mode # and that (S, G) entries are not marked as "blocked". bridge mdb add dev br0 port $swp1 grp $grp vid 10 \ filter_mode include source_list $src1 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "include" check_err $? "(*, G) INCLUDE not added with \"include\" filter mode" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q "blocked" check_fail $? "(S, G) entry marked as \"blocked\" when should not" bridge mdb del dev br0 port $swp1 grp $grp vid 10 # Check that (*, G) EXCLUDE entries are added with correct filter mode # and that (S, G) entries are marked as "blocked". bridge mdb add dev br0 port $swp1 grp $grp vid 10 \ filter_mode exclude source_list $src1 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "exclude" check_err $? "(*, G) EXCLUDE not added with \"exclude\" filter mode" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q "blocked" check_err $? "(S, G) entry not marked as \"blocked\" when should" bridge mdb del dev br0 port $swp1 grp $grp vid 10 ## Protocol tests. # Check that (*, G) and (S, G) entries are added with the specified # protocol. bridge mdb add dev br0 port $swp1 grp $grp vid 10 \ filter_mode exclude source_list $src1 proto zebra bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "zebra" check_err $? "(*, G) entry not added with \"zebra\" protocol" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q "zebra" check_err $? "(S, G) entry not marked added with \"zebra\" protocol" bridge mdb del dev br0 port $swp1 grp $grp vid 10 ## Replace tests. # Check that state can be modified. bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode exclude source_list $src1 bridge mdb replace dev br0 port $swp1 grp $grp permanent vid 10 \ filter_mode exclude source_list $src1 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "permanent" check_err $? "(*, G) entry not marked as \"permanent\" after replace" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q "permanent" check_err $? "(S, G) entry not marked as \"permanent\" after replace" bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode exclude source_list $src1 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "temp" check_err $? "(*, G) entry not marked as \"temp\" after replace" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q "temp" check_err $? "(S, G) entry not marked as \"temp\" after replace" bridge mdb del dev br0 port $swp1 grp $grp vid 10 # Check that filter mode can be modified. bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode exclude source_list $src1 bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode include source_list $src1 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "include" check_err $? "(*, G) not marked with \"include\" filter mode after replace" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q "blocked" check_fail $? "(S, G) marked as \"blocked\" after replace" bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode exclude source_list $src1 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "exclude" check_err $? "(*, G) not marked with \"exclude\" filter mode after replace" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q "blocked" check_err $? "(S, G) not marked as \"blocked\" after replace" bridge mdb del dev br0 port $swp1 grp $grp vid 10 # Check that sources can be added to and removed from the source list. bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode exclude source_list $src1 bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode exclude source_list $src1,$src2,$src3 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1" check_err $? "(S, G) entry for source $src1 not created after replace" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src2" check_err $? "(S, G) entry for source $src2 not created after replace" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src3" check_err $? "(S, G) entry for source $src3 not created after replace" bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode exclude source_list $src1,$src3 bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1" check_err $? "(S, G) entry for source $src1 not created after second replace" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src2" check_fail $? "(S, G) entry for source $src2 created after second replace" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src3" check_err $? "(S, G) entry for source $src3 not created after second replace" bridge mdb del dev br0 port $swp1 grp $grp vid 10 # Check that protocol can be modified. bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode exclude source_list $src1 proto zebra bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \ filter_mode exclude source_list $src1 proto bgp bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \ grep -q "bgp" check_err $? "(*, G) protocol not changed to \"bgp\" after replace" bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \ grep -q "bgp" check_err $? "(S, G) protocol not changed to \"bgp\" after replace" bridge mdb del dev br0 port $swp1 grp $grp vid 10 ## Star exclude tests. # Check star exclude functionality. When adding a new EXCLUDE (*, G), # it needs to be also added to all (S, G) entries for proper # replication. bridge mdb add dev br0 port $swp2 grp $grp vid 10 \ filter_mode include source_list $src1 bridge mdb add dev br0 port $swp1 grp $grp vid 10 bridge -d mdb show dev br0 vid 10 | grep "$swp1" | grep "$grp" | \ grep "$src1" | grep -q "added_by_star_ex" check_err $? "\"added_by_star_ex\" entry not created after adding (*, G) entry" bridge mdb del dev br0 port $swp1 grp $grp vid 10 bridge mdb del dev br0 port $swp2 grp $grp src $src1 vid 10 ## Error cases tests. bridge mdb add dev br0 port $swp1 grp $invalid_grp vid 10 &> /dev/null check_fail $? "Managed to add an entry with an invalid group" bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \ &> /dev/null check_fail $? "Managed to add an INCLUDE entry with an empty source list" bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \ source_list $grp &> /dev/null check_fail $? "Managed to add an entry with an invalid source in source list" bridge mdb add dev br0 port $swp1 grp $grp vid 10 \ source_list $src &> /dev/null check_fail $? "Managed to add an entry with a source list and no filter mode" bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \ source_list $src1 bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \ source_list $src1 &> /dev/null check_fail $? "Managed to replace an entry without using replace" bridge mdb del dev br0 port $swp1 grp $grp vid 10 bridge mdb add dev br0 port $swp1 grp $grp src $src2 vid 10 bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \ source_list $src1,$src2,$src3 &> /dev/null check_fail $? "Managed to add a source that already has a forwarding entry" bridge mdb del dev br0 port $swp1 grp $grp src $src2 vid 10 # Check maximum number of sources. bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \ source_list $(src_list_create $src_prefix $max_srcs) num_srcs=$(bridge -d mdb show dev br0 vid 10 | grep "$grp" | \ grep "src" | wc -l) [[ $num_srcs -eq $max_srcs ]] check_err $? "Failed to configure maximum number of sources ($max_srcs)" bridge mdb del dev br0 port $swp1 grp $grp vid 10 bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \ source_list $(src_list_create $src_prefix $((max_srcs + 1))) \ &> /dev/null check_fail $? "Managed to exceed maximum number of sources ($max_srcs)" log_test "$name (*, G) port group entries configuration tests" } cfg_test_port_ip_star_g() { echo log_info "# Port group entries configuration tests - (*, G)" cfg_test_port_common "IPv4 (*, G)" "grp 239.1.1.1" cfg_test_port_common "IPv6 (*, G)" "grp ff0e::1" __cfg_test_port_ip_star_g "IPv4" "239.1.1.1" "224.0.0.1" "192.0.2." __cfg_test_port_ip_star_g "IPv6" "ff0e::1" "ff02::1" "2001:db8:1::" } __cfg_test_port_ip_sg() { local name=$1; shift local grp=$1; shift local src=$1; shift local grp_key="grp $grp src $src" RET=0 bridge mdb add dev br0 port $swp1 $grp_key vid 10 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "include" check_err $? "Default filter mode is not \"include\"" bridge mdb del dev br0 port $swp1 $grp_key vid 10 # Check that entries can be added as both permanent and temp and that # group timer is set correctly. bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \ grep -q "permanent" check_err $? "Entry not added as \"permanent\" when should" bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \ grep -q "0.00" check_err $? "\"permanent\" entry has a pending group timer" bridge mdb del dev br0 port $swp1 $grp_key vid 10 bridge mdb add dev br0 port $swp1 $grp_key temp vid 10 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \ grep -q "temp" check_err $? "Entry not added as \"temp\" when should" bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \ grep -q "0.00" check_fail $? "\"temp\" entry has an unpending group timer" bridge mdb del dev br0 port $swp1 $grp_key vid 10 # Check error cases. bridge mdb add dev br0 port $swp1 $grp_key vid 10 \ filter_mode include &> /dev/null check_fail $? "Managed to add an entry with a filter mode" bridge mdb add dev br0 port $swp1 $grp_key vid 10 \ filter_mode include source_list $src &> /dev/null check_fail $? "Managed to add an entry with a source list" bridge mdb add dev br0 port $swp1 grp $grp src $grp vid 10 &> /dev/null check_fail $? "Managed to add an entry with an invalid source" bridge mdb add dev br0 port $swp1 $grp_key vid 10 temp bridge mdb add dev br0 port $swp1 $grp_key vid 10 permanent &> /dev/null check_fail $? "Managed to replace an entry without using replace" bridge mdb del dev br0 port $swp1 $grp_key vid 10 # Check that we can replace available attributes. bridge mdb add dev br0 port $swp1 $grp_key vid 10 proto 123 bridge mdb replace dev br0 port $swp1 $grp_key vid 10 proto 111 bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \ grep -q "111" check_err $? "Failed to replace protocol" bridge mdb replace dev br0 port $swp1 $grp_key vid 10 permanent bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \ grep -q "permanent" check_err $? "Entry not marked as \"permanent\" after replace" bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \ grep -q "0.00" check_err $? "Entry has a pending group timer after replace" bridge mdb replace dev br0 port $swp1 $grp_key vid 10 temp bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \ grep -q "temp" check_err $? "Entry not marked as \"temp\" after replace" bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \ grep -q "0.00" check_fail $? "Entry has an unpending group timer after replace" bridge mdb del dev br0 port $swp1 $grp_key vid 10 # Check star exclude functionality. When adding a (S, G), all matching # (*, G) ports need to be added to it. bridge mdb add dev br0 port $swp2 grp $grp vid 10 bridge mdb add dev br0 port $swp1 $grp_key vid 10 bridge mdb show dev br0 vid 10 | grep "$grp_key" | grep $swp2 | \ grep -q "added_by_star_ex" check_err $? "\"added_by_star_ex\" entry not created after adding (S, G) entry" bridge mdb del dev br0 port $swp1 $grp_key vid 10 bridge mdb del dev br0 port $swp2 grp $grp vid 10 log_test "$name (S, G) port group entries configuration tests" } cfg_test_port_ip_sg() { echo log_info "# Port group entries configuration tests - (S, G)" cfg_test_port_common "IPv4 (S, G)" "grp 239.1.1.1 src 192.0.2.1" cfg_test_port_common "IPv6 (S, G)" "grp ff0e::1 src 2001:db8:1::1" __cfg_test_port_ip_sg "IPv4" "239.1.1.1" "192.0.2.1" __cfg_test_port_ip_sg "IPv6" "ff0e::1" "2001:db8:1::1" } cfg_test_port_ip() { cfg_test_port_ip_star_g cfg_test_port_ip_sg } __cfg_test_port_l2() { local grp="01:02:03:04:05:06" RET=0 bridge meb add dev br0 port $swp grp 00:01:02:03:04:05 \ permanent vid 10 &> /dev/null check_fail $? "Managed to add an entry with unicast MAC" bridge mdb add dev br0 port $swp grp $grp src 00:01:02:03:04:05 \ permanent vid 10 &> /dev/null check_fail $? "Managed to add an entry with a source" bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \ filter_mode include &> /dev/null check_fail $? "Managed to add an entry with a filter mode" bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \ source_list 00:01:02:03:04:05 &> /dev/null check_fail $? "Managed to add an entry with a source list" log_test "L2 (*, G) port group entries configuration tests" } cfg_test_port_l2() { echo log_info "# Port group entries configuration tests - L2" cfg_test_port_common "L2 (*, G)" "grp 01:02:03:04:05:06" __cfg_test_port_l2 } # Check configuration of regular (port) entries of all types. cfg_test_port() { cfg_test_port_ip cfg_test_port_l2 } ipv4_grps_get() { local max_grps=$1; shift local i for i in $(seq 0 $((max_grps - 1))); do echo "239.1.1.$i" done } ipv6_grps_get() { local max_grps=$1; shift local i for i in $(seq 0 $((max_grps - 1))); do echo "ff0e::$(printf %x $i)" done } l2_grps_get() { local max_grps=$1; shift local i for i in $(seq 0 $((max_grps - 1))); do echo "01:00:00:00:00:$(printf %02x $i)" done } cfg_test_dump_common() { local name=$1; shift local fn=$1; shift local max_bridges=2 local max_grps=256 local max_ports=32 local num_entries local batch_file local grp local i j RET=0 # Create net devices. for i in $(seq 1 $max_bridges); do ip link add name br-test${i} up type bridge vlan_filtering 1 \ mcast_snooping 1 for j in $(seq 1 $max_ports); do ip link add name br-test${i}-du${j} up \ master br-test${i} type dummy done done # Create batch file with MDB entries. batch_file=$(mktemp) for i in $(seq 1 $max_bridges); do for j in $(seq 1 $max_ports); do for grp in $($fn $max_grps); do echo "mdb add dev br-test${i} \ port br-test${i}-du${j} grp $grp \ permanent vid 1" >> $batch_file done done done # Program the batch file and check for expected number of entries. bridge -b $batch_file for i in $(seq 1 $max_bridges); do num_entries=$(bridge mdb show dev br-test${i} | \ grep "permanent" | wc -l) [[ $num_entries -eq $((max_grps * max_ports)) ]] check_err $? "Wrong number of entries in br-test${i}" done # Cleanup. rm $batch_file for i in $(seq 1 $max_bridges); do ip link del dev br-test${i} for j in $(seq $max_ports); do ip link del dev br-test${i}-du${j} done done log_test "$name large scale dump tests" } # Check large scale dump. cfg_test_dump() { echo log_info "# Large scale dump tests" cfg_test_dump_common "IPv4" ipv4_grps_get cfg_test_dump_common "IPv6" ipv6_grps_get cfg_test_dump_common "L2" l2_grps_get } cfg_test() { cfg_test_host cfg_test_port cfg_test_dump } __fwd_test_host_ip() { local grp=$1; shift local src=$1; shift local mode=$1; shift local name local eth_type RET=0 if [[ $mode == "-4" ]]; then name="IPv4" eth_type="ipv4" else name="IPv6" eth_type="ipv6" fi tc filter add dev br0 ingress protocol 802.1q pref 1 handle 1 flower \ vlan_ethtype $eth_type vlan_id 10 dst_ip $grp src_ip $src \ action drop # Packet should only be flooded to multicast router ports when there is # no matching MDB entry. The bridge is not configured as a multicast # router port. $MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q tc_check_packets "dev br0 ingress" 1 0 check_err $? "Packet locally received after flood" # Install a regular port group entry and expect the packet to not be # locally received. bridge mdb add dev br0 port $swp2 grp $grp temp vid 10 $MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q tc_check_packets "dev br0 ingress" 1 0 check_err $? "Packet locally received after installing a regular entry" # Add a host entry and expect the packet to be locally received. bridge mdb add dev br0 port br0 grp $grp temp vid 10 $MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q tc_check_packets "dev br0 ingress" 1 1 check_err $? "Packet not locally received after adding a host entry" # Remove the host entry and expect the packet to not be locally # received. bridge mdb del dev br0 port br0 grp $grp vid 10 $MZ $mode $h1.10 -c 1 -p 128 -A $src -B $grp -t udp -q tc_check_packets "dev br0 ingress" 1 1 check_err $? "Packet locally received after removing a host entry" bridge mdb del dev br0 port $swp2 grp $grp vid 10 tc filter del dev br0 ingress protocol 802.1q pref 1 handle 1 flower log_test "$name host entries forwarding tests" } fwd_test_host_ip() { __fwd_test_host_ip "239.1.1.1" "192.0.2.1" "-4" __fwd_test_host_ip "ff0e::1" "2001:db8:1::1" "-6" } fwd_test_host_l2() { local dmac=01:02:03:04:05:06 RET=0 tc filter add dev br0 ingress protocol all pref 1 handle 1 flower \ dst_mac $dmac action drop # Packet should be flooded and locally received when there is no # matching MDB entry. $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q tc_check_packets "dev br0 ingress" 1 1 check_err $? "Packet not locally received after flood" # Install a regular port group entry and expect the packet to not be # locally received. bridge mdb add dev br0 port $swp2 grp $dmac permanent vid 10 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q tc_check_packets "dev br0 ingress" 1 1 check_err $? "Packet locally received after installing a regular entry" # Add a host entry and expect the packet to be locally received. bridge mdb add dev br0 port br0 grp $dmac permanent vid 10 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q tc_check_packets "dev br0 ingress" 1 2 check_err $? "Packet not locally received after adding a host entry" # Remove the host entry and expect the packet to not be locally # received. bridge mdb del dev br0 port br0 grp $dmac permanent vid 10 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q tc_check_packets "dev br0 ingress" 1 2 check_err $? "Packet locally received after removing a host entry" bridge mdb del dev br0 port $swp2 grp $dmac permanent vid 10 tc filter del dev br0 ingress protocol all pref 1 handle 1 flower log_test "L2 host entries forwarding tests" } fwd_test_host() { # Disable multicast router on the bridge to ensure that packets are # only locally received when a matching host entry is present. ip link set dev br0 type bridge mcast_router 0 fwd_test_host_ip fwd_test_host_l2 ip link set dev br0 type bridge mcast_router 1 } __fwd_test_port_ip() { local grp=$1; shift local valid_src=$1; shift local invalid_src=$1; shift local mode=$1; shift local filter_mode=$1; shift local name local eth_type local src_list RET=0 if [[ $mode == "-4" ]]; then name="IPv4" eth_type="ipv4" else name="IPv6" eth_type="ipv6" fi # The valid source is the one we expect to get packets from after # adding the entry. if [[ $filter_mode == "include" ]]; then src_list=$valid_src else src_list=$invalid_src fi tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 1 flower \ vlan_ethtype $eth_type vlan_id 10 dst_ip $grp \ src_ip $valid_src action drop tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 2 flower \ vlan_ethtype $eth_type vlan_id 10 dst_ip $grp \ src_ip $invalid_src action drop $MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q tc_check_packets "dev $h2 ingress" 1 0 check_err $? "Packet from valid source received on H2 before adding entry" $MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q tc_check_packets "dev $h2 ingress" 2 0 check_err $? "Packet from invalid source received on H2 before adding entry" bridge mdb add dev br0 port $swp2 grp $grp vid 10 \ filter_mode $filter_mode source_list $src_list $MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q tc_check_packets "dev $h2 ingress" 1 1 check_err $? "Packet from valid source not received on H2 after adding entry" $MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q tc_check_packets "dev $h2 ingress" 2 0 check_err $? "Packet from invalid source received on H2 after adding entry" bridge mdb replace dev br0 port $swp2 grp $grp vid 10 \ filter_mode exclude $MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q tc_check_packets "dev $h2 ingress" 1 2 check_err $? "Packet from valid source not received on H2 after allowing all sources" $MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q tc_check_packets "dev $h2 ingress" 2 1 check_err $? "Packet from invalid source not received on H2 after allowing all sources" bridge mdb del dev br0 port $swp2 grp $grp vid 10 $MZ $mode $h1.10 -c 1 -p 128 -A $valid_src -B $grp -t udp -q tc_check_packets "dev $h2 ingress" 1 2 check_err $? "Packet from valid source received on H2 after deleting entry" $MZ $mode $h1.10 -c 1 -p 128 -A $invalid_src -B $grp -t udp -q tc_check_packets "dev $h2 ingress" 2 1 check_err $? "Packet from invalid source received on H2 after deleting entry" tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 2 flower tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 1 flower log_test "$name port group \"$filter_mode\" entries forwarding tests" } fwd_test_port_ip() { __fwd_test_port_ip "239.1.1.1" "192.0.2.1" "192.0.2.2" "-4" "exclude" __fwd_test_port_ip "ff0e::1" "2001:db8:1::1" "2001:db8:1::2" "-6" \ "exclude" __fwd_test_port_ip "239.1.1.1" "192.0.2.1" "192.0.2.2" "-4" "include" __fwd_test_port_ip "ff0e::1" "2001:db8:1::1" "2001:db8:1::2" "-6" \ "include" } fwd_test_port_l2() { local dmac=01:02:03:04:05:06 RET=0 tc filter add dev $h2 ingress protocol all pref 1 handle 1 flower \ dst_mac $dmac action drop $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q tc_check_packets "dev $h2 ingress" 1 0 check_err $? "Packet received on H2 before adding entry" bridge mdb add dev br0 port $swp2 grp $dmac permanent vid 10 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q tc_check_packets "dev $h2 ingress" 1 1 check_err $? "Packet not received on H2 after adding entry" bridge mdb del dev br0 port $swp2 grp $dmac permanent vid 10 $MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q tc_check_packets "dev $h2 ingress" 1 1 check_err $? "Packet received on H2 after deleting entry" tc filter del dev $h2 ingress protocol all pref 1 handle 1 flower log_test "L2 port entries forwarding tests" } fwd_test_port() { # Disable multicast flooding to ensure that packets are only forwarded # out of a port when a matching port group entry is present. bridge link set dev $swp2 mcast_flood off fwd_test_port_ip fwd_test_port_l2 bridge link set dev $swp2 mcast_flood on } fwd_test() { echo log_info "# Forwarding tests" # Forwarding according to MDB entries only takes place when the bridge # detects that there is a valid querier in the network. Set the bridge # as the querier and assign it a valid IPv6 link-local address to be # used as the source address for MLD queries. ip -6 address add fe80::1/64 nodad dev br0 ip link set dev br0 type bridge mcast_querier 1 # Wait the default Query Response Interval (10 seconds) for the bridge # to determine that there are no other queriers in the network. sleep 10 fwd_test_host fwd_test_port ip link set dev br0 type bridge mcast_querier 0 ip -6 address del fe80::1/64 dev br0 } ctrl_igmpv3_is_in_test() { RET=0 # Add a permanent entry and check that it is not affected by the # received IGMP packet. bridge mdb add dev br0 port $swp1 grp 239.1.1.1 permanent vid 10 \ filter_mode include source_list 192.0.2.1 # IS_IN ( 192.0.2.2 ) $MZ $h1.10 -c 1 -A 192.0.2.1 -B 239.1.1.1 \ -t ip proto=2,p=$(igmpv3_is_in_get 239.1.1.1 192.0.2.2) -q bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | grep -q 192.0.2.2 check_fail $? "Permanent entry affected by IGMP packet" # Replace the permanent entry with a temporary one and check that after # processing the IGMP packet, a new source is added to the list along # with a new forwarding entry. bridge mdb replace dev br0 port $swp1 grp 239.1.1.1 temp vid 10 \ filter_mode include source_list 192.0.2.1 # IS_IN ( 192.0.2.2 ) $MZ $h1.10 -c 1 -A 192.0.2.1 -B 239.1.1.1 \ -t ip proto=2,p=$(igmpv3_is_in_get 239.1.1.1 192.0.2.2) -q bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | grep -v "src" | \ grep -q 192.0.2.2 check_err $? "Source not add to source list" bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | \ grep -q "src 192.0.2.2" check_err $? "(S, G) entry not created for new source" bridge mdb del dev br0 port $swp1 grp 239.1.1.1 vid 10 log_test "IGMPv3 MODE_IS_INCLUDE tests" } ctrl_mldv2_is_in_test() { RET=0 # Add a permanent entry and check that it is not affected by the # received MLD packet. bridge mdb add dev br0 port $swp1 grp ff0e::1 permanent vid 10 \ filter_mode include source_list 2001:db8:1::1 # IS_IN ( 2001:db8:1::2 ) local p=$(mldv2_is_in_get fe80::1 ff0e::1 2001:db8:1::2) $MZ -6 $h1.10 -c 1 -A fe80::1 -B ff0e::1 \ -t ip hop=1,next=0,p="$p" -q bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | \ grep -q 2001:db8:1::2 check_fail $? "Permanent entry affected by MLD packet" # Replace the permanent entry with a temporary one and check that after # processing the MLD packet, a new source is added to the list along # with a new forwarding entry. bridge mdb replace dev br0 port $swp1 grp ff0e::1 temp vid 10 \ filter_mode include source_list 2001:db8:1::1 # IS_IN ( 2001:db8:1::2 ) $MZ -6 $h1.10 -c 1 -A fe80::1 -B ff0e::1 \ -t ip hop=1,next=0,p="$p" -q bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | grep -v "src" | \ grep -q 2001:db8:1::2 check_err $? "Source not add to source list" bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | \ grep -q "src 2001:db8:1::2" check_err $? "(S, G) entry not created for new source" bridge mdb del dev br0 port $swp1 grp ff0e::1 vid 10 log_test "MLDv2 MODE_IS_INCLUDE tests" } ctrl_test() { echo log_info "# Control packets tests" ctrl_igmpv3_is_in_test ctrl_mldv2_is_in_test } trap cleanup EXIT setup_prepare setup_wait tests_run exit $EXIT_STATUS