#!/bin/bash
# SPDX-License-Identifier: GPL-2.0-only

VNI_GEN=$RANDOM
NSIM_ID=$((RANDOM % 1024))
NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID
NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID
NSIM_NETDEV=
HAS_ETHTOOL=
STATIC_ENTRIES=
EXIT_STATUS=0
num_cases=0
num_errors=0

clean_up_devs=( )

function err_cnt {
    echo "ERROR:" $@
    EXIT_STATUS=1
    ((num_errors++))
    ((num_cases++))
}

function pass_cnt {
    ((num_cases++))
}

function cleanup_tuns {
    for dev in "${clean_up_devs[@]}"; do
	[ -e /sys/class/net/$dev ] && ip link del dev $dev
    done
    clean_up_devs=( )
}

function cleanup_nsim {
    if [ -e $NSIM_DEV_SYS ]; then
	echo $NSIM_ID > /sys/bus/netdevsim/del_device
    fi
}

function cleanup {
    cleanup_tuns
    cleanup_nsim
}

trap cleanup EXIT

function new_vxlan {
    local dev=$1
    local dstport=$2
    local lower=$3
    local ipver=$4
    local flags=$5

    local group ipfl

    [ "$ipver" != '6' ] && group=239.1.1.1 || group=fff1::1
    [ "$ipver" != '6' ] || ipfl="-6"

    [[ ! "$flags" =~ "external" ]] && flags="$flags id $((VNI_GEN++))"

    ip $ipfl link add $dev type vxlan \
       group $group \
       dev $lower \
       dstport $dstport \
       $flags

    ip link set dev $dev up

    clean_up_devs=("${clean_up_devs[@]}" $dev)

    check_tables
}

function new_geneve {
    local dev=$1
    local dstport=$2
    local ipver=$3
    local flags=$4

    local group ipfl

    [ "$ipver" != '6' ] && remote=1.1.1.2 || group=::2
    [ "$ipver" != '6' ] || ipfl="-6"

    [[ ! "$flags" =~ "external" ]] && flags="$flags vni $((VNI_GEN++))"

    ip $ipfl link add $dev type geneve \
       remote $remote  \
       dstport $dstport \
       $flags

    ip link set dev $dev up

    clean_up_devs=("${clean_up_devs[@]}" $dev)

    check_tables
}

function del_dev {
    local dev=$1

    ip link del dev $dev
    check_tables
}

# Helpers for netdevsim port/type encoding
function mke {
    local port=$1
    local type=$2

    echo $((port << 16 | type))
}

function pre {
    local val=$1

    echo -e "port: $((val >> 16))\ttype: $((val & 0xffff))"
}

function pre_ethtool {
    local val=$1
    local port=$((val >> 16))
    local type=$((val & 0xffff))

    case $type in
	1)
	    type_name="vxlan"
	    ;;
	2)
	    type_name="geneve"
	    ;;
	4)
	    type_name="vxlan-gpe"
	    ;;
	*)
	    type_name="bit X"
	    ;;
    esac

    echo "port $port, $type_name"
}

function check_table {
    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
    local -n expected=$2
    local last=$3

    read -a have < $path

    if [ ${#expected[@]} -ne ${#have[@]} ]; then
	echo "check_table: BAD NUMBER OF ITEMS"
	return 0
    fi

    for i in "${!expected[@]}"; do
	if [ -n "$HAS_ETHTOOL" -a ${expected[i]} -ne 0 ]; then
	    pp_expected=`pre_ethtool ${expected[i]}`
	    ethtool --show-tunnels $NSIM_NETDEV | grep "$pp_expected" >/dev/null
	    if [ $? -ne 0 -a $last -ne 0 ]; then
		err_cnt "ethtool table $1 on port $port: $pfx - $msg"
		echo "       check_table: ethtool does not contain '$pp_expected'"
		ethtool --show-tunnels $NSIM_NETDEV
		return 0

	    fi
	fi

	if [ ${expected[i]} != ${have[i]} ]; then
	    if [ $last -ne 0 ]; then
		err_cnt "table $1 on port $port: $pfx - $msg"
		echo "       check_table: wrong entry $i"
		echo "       expected: `pre ${expected[i]}`"
		echo "       have:     `pre ${have[i]}`"
		return 0
	    fi
	    return 1
	fi
    done

    pass_cnt
    return 0
}

function check_tables {
    # Need retries in case we have workqueue making the changes
    local retries=10

    while ! check_table 0 exp0 $((retries == 0)); do
	sleep 0.02
	((retries--))
    done
    while ! check_table 1 exp1 $((retries == 0)); do
	sleep 0.02
	((retries--))
    done

    if [ -n "$HAS_ETHTOOL" -a -n "${STATIC_ENTRIES[0]}" ]; then
	fail=0
	for i in "${!STATIC_ENTRIES[@]}"; do
	    pp_expected=`pre_ethtool ${STATIC_ENTRIES[i]}`
	    cnt=$(ethtool --show-tunnels $NSIM_NETDEV | grep -c "$pp_expected")
	    if [ $cnt -ne 1 ]; then
		err_cnt "ethtool static entry: $pfx - $msg"
		echo "       check_table: ethtool does not contain '$pp_expected'"
		ethtool --show-tunnels $NSIM_NETDEV
		fail=1
	    fi
	done
	[ $fail == 0 ] && pass_cnt
    fi
}

function print_table {
    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
    read -a have < $path

    tree $NSIM_DEV_DFS/

    echo "Port $port table $1:"

    for i in "${!have[@]}"; do
	echo "    `pre ${have[i]}`"
    done

}

function print_tables {
    print_table 0
    print_table 1
}

function get_netdev_name {
    local -n old=$1

    new=$(ls /sys/class/net)

    for netdev in $new; do
	for check in $old; do
            [ $netdev == $check ] && break
	done

	if [ $netdev != $check ]; then
	    echo $netdev
	    break
	fi
    done
}

###
### Code start
###

# Probe ethtool support
ethtool -h | grep show-tunnels 2>&1 >/dev/null && HAS_ETHTOOL=y

modprobe netdevsim

# Basic test
pfx="basic"

for port in 0 1; do
    old_netdevs=$(ls /sys/class/net)
    if [ $port -eq 0 ]; then
	echo $NSIM_ID > /sys/bus/netdevsim/new_device
    else
	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
	echo 1 > $NSIM_DEV_SYS/new_port
    fi
    NSIM_NETDEV=`get_netdev_name old_netdevs`

    msg="new NIC device created"
    exp0=( 0 0 0 0 )
    exp1=( 0 0 0 0 )
    check_tables

    msg="VxLAN v4 devices"
    exp0=( `mke 4789 1` 0 0 0 )
    new_vxlan vxlan0 4789 $NSIM_NETDEV
    new_vxlan vxlan1 4789 $NSIM_NETDEV

    msg="VxLAN v4 devices go down"
    exp0=( 0 0 0 0 )
    ifconfig vxlan1 down
    ifconfig vxlan0 down
    check_tables

    msg="VxLAN v6 devices"
    exp0=( `mke 4789 1` 0 0 0 )
    new_vxlan vxlanA 4789 $NSIM_NETDEV 6

    for ifc in vxlan0 vxlan1; do
	ifconfig $ifc up
    done

    new_vxlan vxlanB 4789 $NSIM_NETDEV 6

    msg="another VxLAN v6 devices"
    exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
    new_vxlan vxlanC 4790 $NSIM_NETDEV 6

    msg="Geneve device"
    exp1=( `mke 6081 2` 0 0 0 )
    new_geneve gnv0 6081

    msg="NIC device goes down"
    ifconfig $NSIM_NETDEV down
    if [ $port -eq 1 ]; then
	exp0=( 0 0 0 0 )
	exp1=( 0 0 0 0 )
    fi
    check_tables
    msg="NIC device goes up again"
    ifconfig $NSIM_NETDEV up
    exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
    exp1=( `mke 6081 2` 0 0 0 )
    check_tables

    cleanup_tuns

    msg="tunnels destroyed"
    exp0=( 0 0 0 0 )
    exp1=( 0 0 0 0 )
    check_tables

    modprobe -r geneve
    modprobe -r vxlan
    modprobe -r udp_tunnel

    check_tables
done

modprobe -r netdevsim

# Module tests
pfx="module tests"

if modinfo netdevsim | grep udp_tunnel >/dev/null; then
    err_cnt "netdevsim depends on udp_tunnel"
else
    pass_cnt
fi

modprobe netdevsim

old_netdevs=$(ls /sys/class/net)
port=0
echo $NSIM_ID > /sys/bus/netdevsim/new_device
echo 0 > $NSIM_DEV_SYS/del_port
echo 1000 > $NSIM_DEV_DFS/udp_ports_sleep
echo 0 > $NSIM_DEV_SYS/new_port
NSIM_NETDEV=`get_netdev_name old_netdevs`

msg="create VxLANs"
exp0=( 0 0 0 0 ) # sleep is longer than out wait
new_vxlan vxlan0 10000 $NSIM_NETDEV

modprobe -r vxlan
modprobe -r udp_tunnel

msg="remove tunnels"
exp0=( 0 0 0 0 )
check_tables

msg="create VxLANs"
exp0=( 0 0 0 0 ) # sleep is longer than out wait
new_vxlan vxlan0 10000 $NSIM_NETDEV

exp0=( 0 0 0 0 )

modprobe -r netdevsim
modprobe netdevsim

# Overflow the table

function overflow_table0 {
    local pfx=$1

    msg="create VxLANs 1/5"
    exp0=( `mke 10000 1` 0 0 0 )
    new_vxlan vxlan0 10000 $NSIM_NETDEV

    msg="create VxLANs 2/5"
    exp0=( `mke 10000 1` `mke 10001 1` 0 0 )
    new_vxlan vxlan1 10001 $NSIM_NETDEV

    msg="create VxLANs 3/5"
    exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` 0 )
    new_vxlan vxlan2 10002 $NSIM_NETDEV

    msg="create VxLANs 4/5"
    exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` `mke 10003 1` )
    new_vxlan vxlan3 10003 $NSIM_NETDEV

    msg="create VxLANs 5/5"
    new_vxlan vxlan4 10004 $NSIM_NETDEV
}

function overflow_table1 {
    local pfx=$1

    msg="create GENEVE 1/5"
    exp1=( `mke 20000 2` 0 0 0 )
    new_geneve gnv0 20000

    msg="create GENEVE 2/5"
    exp1=( `mke 20000 2` `mke 20001 2` 0 0 )
    new_geneve gnv1 20001

    msg="create GENEVE 3/5"
    exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` 0 )
    new_geneve gnv2 20002

    msg="create GENEVE 4/5"
    exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` `mke 20003 2` )
    new_geneve gnv3 20003

    msg="create GENEVE 5/5"
    new_geneve gnv4 20004
}

echo $NSIM_ID > /sys/bus/netdevsim/new_device
echo 0 > $NSIM_DEV_SYS/del_port

for port in 0 1; do
    if [ $port -ne 0 ]; then
	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
    fi

    echo $port > $NSIM_DEV_SYS/new_port
    ifconfig $NSIM_NETDEV up

    overflow_table0 "overflow NIC table"
    overflow_table1 "overflow NIC table"

    msg="replace VxLAN in overflow table"
    exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` )
    del_dev vxlan1

    msg="vacate VxLAN in overflow table"
    exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
    del_dev vxlan2

    msg="replace GENEVE in overflow table"
    exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` )
    del_dev gnv1

    msg="vacate GENEVE in overflow table"
    exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` )
    del_dev gnv2

    msg="table sharing - share"
    exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` )
    new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external"

    msg="table sharing - overflow"
    new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external"
    msg="table sharing - overflow v6"
    new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external"

    exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` )
    del_dev gnv4

    msg="destroy NIC"
    echo $port > $NSIM_DEV_SYS/del_port

    cleanup_tuns
    exp0=( 0 0 0 0 )
    exp1=( 0 0 0 0 )
done

cleanup_nsim

# Sync all
pfx="sync all"

echo $NSIM_ID > /sys/bus/netdevsim/new_device
echo 0 > $NSIM_DEV_SYS/del_port
echo 1 > $NSIM_DEV_DFS/udp_ports_sync_all

for port in 0 1; do
    if [ $port -ne 0 ]; then
	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
    fi

    echo $port > $NSIM_DEV_SYS/new_port
    ifconfig $NSIM_NETDEV up

    overflow_table0 "overflow NIC table"
    overflow_table1 "overflow NIC table"

    msg="replace VxLAN in overflow table"
    exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` )
    del_dev vxlan1

    msg="vacate VxLAN in overflow table"
    exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
    del_dev vxlan2

    msg="replace GENEVE in overflow table"
    exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` )
    del_dev gnv1

    msg="vacate GENEVE in overflow table"
    exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` )
    del_dev gnv2

    msg="table sharing - share"
    exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` )
    new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external"

    msg="table sharing - overflow"
    new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external"
    msg="table sharing - overflow v6"
    new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external"

    exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` )
    del_dev gnv4

    msg="destroy NIC"
    echo $port > $NSIM_DEV_SYS/del_port

    cleanup_tuns
    exp0=( 0 0 0 0 )
    exp1=( 0 0 0 0 )
done

cleanup_nsim

# Destroy full NIC
pfx="destroy full"

echo $NSIM_ID > /sys/bus/netdevsim/new_device
echo 0 > $NSIM_DEV_SYS/del_port

for port in 0 1; do
    if [ $port -ne 0 ]; then
	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
    fi

    echo $port > $NSIM_DEV_SYS/new_port
    ifconfig $NSIM_NETDEV up

    overflow_table0 "destroy NIC"
    overflow_table1 "destroy NIC"

    msg="destroy NIC"
    echo $port > $NSIM_DEV_SYS/del_port

    cleanup_tuns
    exp0=( 0 0 0 0 )
    exp1=( 0 0 0 0 )
done

cleanup_nsim

# IPv4 only
pfx="IPv4 only"

echo $NSIM_ID > /sys/bus/netdevsim/new_device
echo 0 > $NSIM_DEV_SYS/del_port
echo 1 > $NSIM_DEV_DFS/udp_ports_ipv4_only

for port in 0 1; do
    if [ $port -ne 0 ]; then
	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
    fi

    echo $port > $NSIM_DEV_SYS/new_port
    ifconfig $NSIM_NETDEV up

    msg="create VxLANs v6"
    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6

    msg="create VxLANs v6"
    new_vxlan vxlanA1 10000 $NSIM_NETDEV 6

    ip link set dev vxlanA0 down
    ip link set dev vxlanA0 up
    check_tables

    msg="create VxLANs v4"
    exp0=( `mke 10000 1` 0 0 0 )
    new_vxlan vxlan0 10000 $NSIM_NETDEV

    msg="down VxLANs v4"
    exp0=( 0 0 0 0 )
    ip link set dev vxlan0 down
    check_tables

    msg="up VxLANs v4"
    exp0=( `mke 10000 1` 0 0 0 )
    ip link set dev vxlan0 up
    check_tables

    msg="destroy VxLANs v4"
    exp0=( 0 0 0 0 )
    del_dev vxlan0

    msg="recreate VxLANs v4"
    exp0=( `mke 10000 1` 0 0 0 )
    new_vxlan vxlan0 10000 $NSIM_NETDEV

    del_dev vxlanA0
    del_dev vxlanA1

    msg="destroy NIC"
    echo $port > $NSIM_DEV_SYS/del_port

    cleanup_tuns
    exp0=( 0 0 0 0 )
    exp1=( 0 0 0 0 )
done

cleanup_nsim

# Failures
pfx="error injection"

echo $NSIM_ID > /sys/bus/netdevsim/new_device
echo 0 > $NSIM_DEV_SYS/del_port

for port in 0 1; do
    if [ $port -ne 0 ]; then
	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
    fi

    echo $port > $NSIM_DEV_SYS/new_port
    ifconfig $NSIM_NETDEV up

    echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error

    msg="1 - create VxLANs v6"
    exp0=( 0 0 0 0 )
    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6

    msg="1 - create VxLANs v4"
    exp0=( `mke 10000 1` 0 0 0 )
    new_vxlan vxlan0 10000 $NSIM_NETDEV

    msg="1 - remove VxLANs v4"
    del_dev vxlan0

    msg="1 - remove VxLANs v6"
    exp0=( 0 0 0 0 )
    del_dev vxlanA0

    msg="2 - create GENEVE"
    exp1=( `mke 20000 2` 0 0 0 )
    new_geneve gnv0 20000

    msg="2 - destroy GENEVE"
    echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
    exp1=( `mke 20000 2` 0 0 0 )
    del_dev gnv0

    msg="2 - create second GENEVE"
    exp1=( 0 `mke 20001 2` 0 0 )
    new_geneve gnv0 20001

    msg="destroy NIC"
    echo $port > $NSIM_DEV_SYS/del_port

    cleanup_tuns
    exp0=( 0 0 0 0 )
    exp1=( 0 0 0 0 )
done

cleanup_nsim

# netdev flags
pfx="netdev flags"

echo $NSIM_ID > /sys/bus/netdevsim/new_device
echo 0 > $NSIM_DEV_SYS/del_port

for port in 0 1; do
    if [ $port -ne 0 ]; then
	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
    fi

    echo $port > $NSIM_DEV_SYS/new_port
    ifconfig $NSIM_NETDEV up

    msg="create VxLANs v6"
    exp0=( `mke 10000 1` 0 0 0 )
    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6

    msg="create VxLANs v4"
    new_vxlan vxlan0 10000 $NSIM_NETDEV

    msg="turn off"
    exp0=( 0 0 0 0 )
    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off
    check_tables

    msg="turn on"
    exp0=( `mke 10000 1` 0 0 0 )
    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on
    check_tables

    msg="remove both"
    del_dev vxlanA0
    exp0=( 0 0 0 0 )
    del_dev vxlan0
    check_tables

    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off

    msg="create VxLANs v4 - off"
    exp0=( 0 0 0 0 )
    new_vxlan vxlan0 10000 $NSIM_NETDEV

    msg="created off - turn on"
    exp0=( `mke 10000 1` 0 0 0 )
    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on
    check_tables

    msg="destroy NIC"
    echo $port > $NSIM_DEV_SYS/del_port

    cleanup_tuns
    exp0=( 0 0 0 0 )
    exp1=( 0 0 0 0 )
done

cleanup_nsim

# device initiated reset
pfx="reset notification"

echo $NSIM_ID > /sys/bus/netdevsim/new_device
echo 0 > $NSIM_DEV_SYS/del_port

for port in 0 1; do
    if [ $port -ne 0 ]; then
	echo 1 > $NSIM_DEV_DFS/udp_ports_open_only
	echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
    fi

    echo $port > $NSIM_DEV_SYS/new_port
    ifconfig $NSIM_NETDEV up

    msg="create VxLANs v6"
    exp0=( `mke 10000 1` 0 0 0 )
    new_vxlan vxlanA0 10000 $NSIM_NETDEV 6

    msg="create VxLANs v4"
    new_vxlan vxlan0 10000 $NSIM_NETDEV

    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
    check_tables

    msg="NIC device goes down"
    ifconfig $NSIM_NETDEV down
    if [ $port -eq 1 ]; then
	exp0=( 0 0 0 0 )
	exp1=( 0 0 0 0 )
    fi
    check_tables

    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
    check_tables

    msg="NIC device goes up again"
    ifconfig $NSIM_NETDEV up
    exp0=( `mke 10000 1` 0 0 0 )
    check_tables

    msg="remove both"
    del_dev vxlanA0
    exp0=( 0 0 0 0 )
    del_dev vxlan0
    check_tables

    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
    check_tables

    msg="destroy NIC"
    echo $port > $NSIM_DEV_SYS/del_port

    cleanup_tuns
    exp0=( 0 0 0 0 )
    exp1=( 0 0 0 0 )
done

cleanup_nsim

# shared port tables
pfx="table sharing"

echo $NSIM_ID > /sys/bus/netdevsim/new_device
echo 0 > $NSIM_DEV_SYS/del_port

echo 0 > $NSIM_DEV_DFS/udp_ports_open_only
echo 1 > $NSIM_DEV_DFS/udp_ports_sleep
echo 1 > $NSIM_DEV_DFS/udp_ports_shared

old_netdevs=$(ls /sys/class/net)
echo 1 > $NSIM_DEV_SYS/new_port
NSIM_NETDEV=`get_netdev_name old_netdevs`
old_netdevs=$(ls /sys/class/net)
echo 2 > $NSIM_DEV_SYS/new_port
NSIM_NETDEV2=`get_netdev_name old_netdevs`

msg="VxLAN v4 devices"
exp0=( `mke 4789 1` 0 0 0 )
exp1=( 0 0 0 0 )
new_vxlan vxlan0 4789 $NSIM_NETDEV
new_vxlan vxlan1 4789 $NSIM_NETDEV2

msg="VxLAN v4 devices go down"
exp0=( 0 0 0 0 )
ifconfig vxlan1 down
ifconfig vxlan0 down
check_tables

for ifc in vxlan0 vxlan1; do
    ifconfig $ifc up
done

msg="VxLAN v6 device"
exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
new_vxlan vxlanC 4790 $NSIM_NETDEV 6

msg="Geneve device"
exp1=( `mke 6081 2` 0 0 0 )
new_geneve gnv0 6081

msg="NIC device goes down"
ifconfig $NSIM_NETDEV down
check_tables

msg="NIC device goes up again"
ifconfig $NSIM_NETDEV up
check_tables

for i in `seq 2`; do
    msg="turn feature off - 1, rep $i"
    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off
    check_tables

    msg="turn feature off - 2, rep $i"
    exp0=( 0 0 0 0 )
    exp1=( 0 0 0 0 )
    ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload off
    check_tables

    msg="turn feature on - 1, rep $i"
    exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
    exp1=( `mke 6081 2` 0 0 0 )
    ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on
    check_tables

    msg="turn feature on - 2, rep $i"
    ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload on
    check_tables
done

msg="tunnels destroyed 1"
cleanup_tuns
exp0=( 0 0 0 0 )
exp1=( 0 0 0 0 )
check_tables

overflow_table0 "overflow NIC table"

msg="re-add a port"

echo 2 > $NSIM_DEV_SYS/del_port
echo 2 > $NSIM_DEV_SYS/new_port
check_tables

msg="replace VxLAN in overflow table"
exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` )
del_dev vxlan1

msg="vacate VxLAN in overflow table"
exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
del_dev vxlan2

echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
check_tables

msg="tunnels destroyed 2"
cleanup_tuns
exp0=( 0 0 0 0 )
exp1=( 0 0 0 0 )
check_tables

echo 1 > $NSIM_DEV_SYS/del_port
echo 2 > $NSIM_DEV_SYS/del_port

cleanup_nsim

# Static IANA port
pfx="static IANA vxlan"

echo $NSIM_ID > /sys/bus/netdevsim/new_device
echo 0 > $NSIM_DEV_SYS/del_port

echo 1 > $NSIM_DEV_DFS/udp_ports_static_iana_vxlan
STATIC_ENTRIES=( `mke 4789 1` )

port=1
old_netdevs=$(ls /sys/class/net)
echo $port > $NSIM_DEV_SYS/new_port
NSIM_NETDEV=`get_netdev_name old_netdevs`

msg="check empty"
exp0=( 0 0 0 0 )
exp1=( 0 0 0 0 )
check_tables

msg="add on static port"
new_vxlan vxlan0 4789 $NSIM_NETDEV
new_vxlan vxlan1 4789 $NSIM_NETDEV

msg="add on different port"
exp0=( `mke 4790 1` 0 0 0 )
new_vxlan vxlan2 4790 $NSIM_NETDEV

cleanup_tuns

msg="tunnels destroyed"
exp0=( 0 0 0 0 )
exp1=( 0 0 0 0 )
check_tables

msg="different type"
new_geneve gnv0	4789

cleanup_tuns
cleanup_nsim

# END

modprobe -r netdevsim

if [ $num_errors -eq 0 ]; then
    echo "PASSED all $num_cases checks"
else
    echo "FAILED $num_errors/$num_cases checks"
fi

exit $EXIT_STATUS