// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
 * Device Tree Source for the RZ/V2M (r9a09g011) Evaluation Kit Board
 *
 * Copyright (C) 2022 Renesas Electronics Corp.
 */

/dts-v1/;
#include "r9a09g011.dtsi"
#include <dt-bindings/pinctrl/rzv2m-pinctrl.h>

/ {
	model = "RZ/V2M Evaluation Kit 2.0";
	compatible = "renesas,rzv2mevk2", "renesas,r9a09g011";

	aliases {
		serial0 = &uart0;
		ethernet0 = &avb;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory@58000000 {
		device_type = "memory";
		/*
		 * first 1.25GiB is reserved for ISP Firmware,
		 * next 128MiB is reserved for secure area.
		 */
		reg = <0x0 0x58000000 0x0 0x28000000>;
	};

	memory@180000000 {
		device_type = "memory";
		reg = <0x1 0x80000000 0x0 0x80000000>;
	};
};

&avb {
	renesas,no-ether-link;
	phy-handle = <&phy0>;
	phy-mode = "gmii";
	status = "okay";

	phy0: ethernet-phy@0 {
		compatible = "ethernet-phy-id001c.c916",
			     "ethernet-phy-ieee802.3-c22";
		reg = <0>;
	};
};

&extal_clk {
	clock-frequency = <48000000>;
};

&i2c0 {
	pinctrl-0 = <&i2c0_pins>;
	pinctrl-names = "default";
	clock-frequency = <400000>;
	status = "okay";
};

&i2c2 {
	pinctrl-0 = <&i2c2_pins>;
	pinctrl-names = "default";
	clock-frequency = <100000>;
	status = "okay";
};

&pinctrl {
	i2c0_pins: i2c0 {
		pinmux = <RZV2M_PORT_PINMUX(5, 0, 2)>, /* SDA */
			 <RZV2M_PORT_PINMUX(5, 1, 2)>; /* SCL */
	};

	i2c2_pins: i2c2 {
		pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
			 <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
	};
};

&pwc {
	renesas,rzv2m-pwc-power;
	status = "okay";
};

&uart0 {
	status = "okay";
};

&usb3drd {
	status = "okay";
};

&usb3host {
	status = "okay";
};

&usb3peri {
	status = "okay";
};

&wdt0 {
	status = "okay";
};