// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2021, Martin Botka */ #include #include #include #include #include / { interrupt-parent = <&intc>; #address-cells = <2>; #size-cells = <2>; chosen { }; clocks { xo_board: xo-board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; clock-output-names = "xo_board"; }; sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32000>; clock-output-names = "sleep_clk"; }; }; cpus { #address-cells = <2>; #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; }; }; CPU1: cpu@1 { device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; }; CPU2: cpu@2 { device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x2>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; }; CPU3: cpu@3 { device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x3>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; }; CPU4: cpu@100 { device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x100>; enable-method = "psci"; capacity-dmips-mhz = <1638>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "cache"; cache-level = <2>; }; }; CPU5: cpu@101 { device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x101>; enable-method = "psci"; capacity-dmips-mhz = <1638>; next-level-cache = <&L2_1>; }; CPU6: cpu@102 { device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x102>; enable-method = "psci"; capacity-dmips-mhz = <1638>; next-level-cache = <&L2_1>; }; CPU7: cpu@103 { device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x103>; enable-method = "psci"; capacity-dmips-mhz = <1638>; next-level-cache = <&L2_1>; }; cpu-map { cluster0 { core0 { cpu = <&CPU0>; }; core1 { cpu = <&CPU1>; }; core2 { cpu = <&CPU2>; }; core3 { cpu = <&CPU3>; }; }; cluster1 { core0 { cpu = <&CPU4>; }; core1 { cpu = <&CPU5>; }; core2 { cpu = <&CPU6>; }; core3 { cpu = <&CPU7>; }; }; }; }; firmware { scm: scm { compatible = "qcom,scm-sm6125", "qcom,scm"; #reset-cells = <1>; }; }; memory@40000000 { /* We expect the bootloader to fill in the size */ reg = <0x0 0x40000000 0x0 0x0>; device_type = "memory"; }; pmu { compatible = "arm,armv8-pmuv3"; interrupts = ; }; psci { compatible = "arm,psci-1.0"; method = "smc"; }; reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; hyp_mem: memory@45700000 { reg = <0x0 0x45700000 0x0 0x600000>; no-map; }; xbl_aop_mem: memory@45e00000 { reg = <0x0 0x45e00000 0x0 0x140000>; no-map; }; sec_apps_mem: memory@45fff000 { reg = <0x0 0x45fff000 0x0 0x1000>; no-map; }; smem_mem: memory@46000000 { reg = <0x0 0x46000000 0x0 0x200000>; no-map; }; reserved_mem1: memory@46200000 { reg = <0x0 0x46200000 0x0 0x2d00000>; no-map; }; camera_mem: memory@4ab00000 { reg = <0x0 0x4ab00000 0x0 0x500000>; no-map; }; modem_mem: memory@4b000000 { reg = <0x0 0x4b000000 0x0 0x7e00000>; no-map; }; venus_mem: memory@52e00000 { reg = <0x0 0x52e00000 0x0 0x500000>; no-map; }; wlan_msa_mem: memory@53300000 { reg = <0x0 0x53300000 0x0 0x200000>; no-map; }; cdsp_mem: memory@53500000 { reg = <0x0 0x53500000 0x0 0x1e00000>; no-map; }; adsp_pil_mem: memory@55300000 { reg = <0x0 0x55300000 0x0 0x1e00000>; no-map; }; ipa_fw_mem: memory@57100000 { reg = <0x0 0x57100000 0x0 0x10000>; no-map; }; ipa_gsi_mem: memory@57110000 { reg = <0x0 0x57110000 0x0 0x5000>; no-map; }; gpu_mem: memory@57115000 { reg = <0x0 0x57115000 0x0 0x2000>; no-map; }; cont_splash_mem: memory@5c000000 { reg = <0x0 0x5c000000 0x0 0x00f00000>; no-map; }; dfps_data_mem: memory@5cf00000 { reg = <0x0 0x5cf00000 0x0 0x0100000>; no-map; }; cdsp_sec_mem: memory@5f800000 { reg = <0x0 0x5f800000 0x0 0x1e00000>; no-map; }; qseecom_mem: memory@5e400000 { reg = <0x0 0x5e400000 0x0 0x1400000>; no-map; }; sdsp_mem: memory@f3000000 { reg = <0x0 0xf3000000 0x0 0x400000>; no-map; }; adsp_mem: memory@f3400000 { reg = <0x0 0xf3400000 0x0 0x800000>; no-map; }; qseecom_ta_mem: memory@13fc00000 { reg = <0x1 0x3fc00000 0x0 0x400000>; no-map; }; }; rpm-glink { compatible = "qcom,glink-rpm"; interrupts = ; qcom,rpm-msg-ram = <&rpm_msg_ram>; mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { compatible = "qcom,rpm-sm6125"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc"; #clock-cells = <1>; }; rpmpd: power-controller { compatible = "qcom,sm6125-rpmpd"; #power-domain-cells = <1>; operating-points-v2 = <&rpmpd_opp_table>; rpmpd_opp_table: opp-table { compatible = "operating-points-v2"; rpmpd_opp_ret: opp1 { opp-level = ; }; rpmpd_opp_ret_plus: opp2 { opp-level = ; }; rpmpd_opp_min_svs: opp3 { opp-level = ; }; rpmpd_opp_low_svs: opp4 { opp-level = ; }; rpmpd_opp_svs: opp5 { opp-level = ; }; rpmpd_opp_svs_plus: opp6 { opp-level = ; }; rpmpd_opp_nom: opp7 { opp-level = ; }; rpmpd_opp_nom_plus: opp8 { opp-level = ; }; rpmpd_opp_turbo: opp9 { opp-level = ; }; rpmpd_opp_turbo_no_cpr: opp10 { opp-level = ; }; }; }; }; }; smem: smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; hwlocks = <&tcsr_mutex 3>; }; soc { #address-cells = <1>; #size-cells = <1>; ranges = <0x00 0x00 0x00 0xffffffff>; compatible = "simple-bus"; tcsr_mutex: hwlock@340000 { compatible = "qcom,tcsr-mutex"; reg = <0x00340000 0x20000>; #hwlock-cells = <1>; }; tlmm: pinctrl@500000 { compatible = "qcom,sm6125-tlmm"; reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>; reg-names = "west", "south", "east"; interrupts = ; gpio-controller; gpio-ranges = <&tlmm 0 0 134>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; sdc2_off_state: sdc2-off-state { clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; }; }; sdc2_on_state: sdc2-on-state { clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; cmd-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; }; data-pins { pins = "sdc2_data"; drive-strength = <10>; bias-pull-up; }; }; }; gcc: clock-controller@1400000 { compatible = "qcom,gcc-sm6125"; reg = <0x01400000 0x1f0000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; clock-names = "bi_tcxo", "sleep_clk"; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; }; hsusb_phy1: phy@1613000 { compatible = "qcom,msm8996-qusb2-phy"; reg = <0x01613000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "cfg_ahb", "ref"; resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; status = "disabled"; }; rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0x045f0000 0x7000>; }; sdhc_1: mmc@4744000 { compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; reg = <0x04744000 0x1000>, <0x04745000 0x1000>; reg-names = "hc", "cqhci"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x160 0x0>; power-domains = <&rpmpd SM6125_VDDCX>; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040873>; bus-width = <8>; non-removable; supports-cqe; status = "disabled"; }; sdhc_2: mmc@4784000 { compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; reg = <0x04784000 0x1000>; reg-names = "hc"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>; clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0x180 0x0>; pinctrl-0 = <&sdc2_on_state>; pinctrl-1 = <&sdc2_off_state>; pinctrl-names = "default", "sleep"; power-domains = <&rpmpd SM6125_VDDCX>; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040873>; bus-width = <4>; status = "disabled"; }; usb3: usb@4ef8800 { compatible = "qcom,sm6125-dwc3", "qcom,dwc3"; reg = <0x04ef8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>; clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <66666667>; power-domains = <&gcc USB30_PRIM_GDSC>; qcom,select-utmi-as-pipe-clk; status = "disabled"; usb3_dwc3: usb@4e00000 { compatible = "snps,dwc3"; reg = <0x04e00000 0xcd00>; interrupts = ; iommus = <&apps_smmu 0x100 0x0>; phys = <&hsusb_phy1>; phy-names = "usb2-phy"; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; maximum-speed = "high-speed"; dr_mode = "peripheral"; }; }; sram@4690000 { compatible = "qcom,rpm-stats"; reg = <0x04690000 0x10000>; }; spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x01c40000 0x1100>, <0x01e00000 0x2000000>, <0x03e00000 0x100000>, <0x03f00000 0xa0000>, <0x01c0a000 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = ; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; cell-index = <0>; }; apps_smmu: iommu@c600000 { compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0xc600000 0x80000>; interrupts = , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ; #global-interrupts = <1>; #iommu-cells = <2>; }; apcs_glb: mailbox@f111000 { compatible = "qcom,sm6125-apcs-hmss-global"; reg = <0x0f111000 0x1000>; #mbox-cells = <1>; }; timer@f120000 { compatible = "arm,armv7-timer-mem"; #address-cells = <1>; #size-cells = <1>; ranges; reg = <0x0f120000 0x1000>; clock-frequency = <19200000>; frame@f121000 { frame-number = <0>; interrupts = , ; reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>; }; frame@f123000 { frame-number = <1>; interrupts = ; reg = <0x0f123000 0x1000>; status = "disabled"; }; frame@f124000 { frame-number = <2>; interrupts = ; reg = <0x0f124000 0x1000>; status = "disabled"; }; frame@f125000 { frame-number = <3>; interrupts = ; reg = <0x0f125000 0x1000>; status = "disabled"; }; frame@f126000 { frame-number = <4>; interrupts = ; reg = <0x0f126000 0x1000>; status = "disabled"; }; frame@f127000 { frame-number = <5>; interrupts = ; reg = <0x0f127000 0x1000>; status = "disabled"; }; frame@f128000 { frame-number = <6>; interrupts = ; reg = <0x0f128000 0x1000>; status = "disabled"; }; }; intc: interrupt-controller@f200000 { compatible = "arm,gic-v3"; reg = <0x0f200000 0x20000>, <0x0f300000 0x100000>; #interrupt-cells = <3>; interrupt-controller; interrupts = ; }; }; timer { compatible = "arm,armv8-timer"; interrupts = ; clock-frequency = <19200000>; }; };