// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC * * Copyright (C) 2014 Atmel, * 2014 Nicolas Ferre */ #include #include #include #include #include #include / { #address-cells = <1>; #size-cells = <1>; model = "Atmel SAMA5D4 family SoC"; compatible = "atmel,sama5d4"; interrupt-parent = <&aic>; aliases { serial0 = &usart3; serial1 = &usart4; serial2 = &usart2; serial3 = &usart0; serial4 = &usart1; serial5 = &uart0; serial6 = &uart1; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; gpio3 = &pioD; gpio4 = &pioE; pwm0 = &pwm0; ssc0 = &ssc0; ssc1 = &ssc1; tcb0 = &tcb0; tcb1 = &tcb1; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a5"; reg = <0>; next-level-cache = <&L2>; }; }; memory@20000000 { device_type = "memory"; reg = <0x20000000 0x20000000>; }; clocks { slow_xtal: slow_xtal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; main_xtal: main_xtal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000>; }; }; ns_sram: sram@210000 { compatible = "mmio-sram"; reg = <0x00210000 0x10000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00210000 0x10000>; }; ahb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; nfc_sram: sram@100000 { compatible = "mmio-sram"; no-memory-wc; reg = <0x100000 0x2400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x100000 0x2400>; }; vdec0: vdec@300000 { compatible = "microchip,sama5d4-vdec"; reg = <0x00300000 0x100000>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; }; usb0: gadget@400000 { compatible = "atmel,sama5d3-udc"; reg = <0x00400000 0x100000 0xfc02c000 0x4000>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; }; usb1: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; usb2: ehci@600000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 46>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; L2: cache-controller@a00000 { compatible = "arm,pl310-cache"; reg = <0x00a00000 0x1000>; interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>; cache-unified; cache-level = <2>; }; ebi: ebi@10000000 { compatible = "atmel,sama5d3-ebi"; #address-cells = <2>; #size-cells = <1>; atmel,smc = <&hsmc>; reg = <0x10000000 0x10000000 0x60000000 0x28000000>; ranges = <0x0 0x0 0x10000000 0x10000000 0x1 0x0 0x60000000 0x10000000 0x2 0x0 0x70000000 0x10000000 0x3 0x0 0x80000000 0x8000000>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { compatible = "atmel,sama5d3-nand-controller"; atmel,nfc-sram = <&nfc_sram>; atmel,nfc-io = <&nfc_io>; ecc-engine = <&pmecc>; #address-cells = <2>; #size-cells = <1>; ranges; status = "disabled"; }; }; nfc_io: nfc-io@90000000 { compatible = "atmel,sama5d3-nfc-io", "syscon"; reg = <0x90000000 0x8000000>; }; apb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; hlcdc: hlcdc@f0000000 { compatible = "atmel,sama5d4-hlcdc"; reg = <0xf0000000 0x4000>; interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; clock-names = "periph_clk","sys_clk", "slow_clk"; status = "disabled"; hlcdc-display-controller { compatible = "atmel,hlcdc-display-controller"; #address-cells = <1>; #size-cells = <0>; port@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; }; hlcdc_pwm: hlcdc-pwm { compatible = "atmel,hlcdc-pwm"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_pwm>; #pwm-cells = <3>; }; }; dma1: dma-controller@f0004000 { compatible = "atmel,sama5d4-dma"; reg = <0xf0004000 0x200>; interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; clocks = <&pmc PMC_TYPE_PERIPHERAL 50>; clock-names = "dma_clk"; }; isi: isi@f0008000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf0008000 0x4000>; interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isi_data_0_7>; clocks = <&pmc PMC_TYPE_PERIPHERAL 52>; clock-names = "isi_clk"; status = "disabled"; port { #address-cells = <1>; #size-cells = <0>; }; }; ramc0: ramc@f0010000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf0010000 0x200>; clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "ddrck", "mpddr"; }; dma0: dma-controller@f0014000 { compatible = "atmel,sama5d4-dma"; reg = <0xf0014000 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "dma_clk"; }; pmc: clock-controller@f0018000 { compatible = "atmel,sama5d4-pmc", "syscon"; reg = <0xf0018000 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; #clock-cells = <2>; clocks = <&clk32k>, <&main_xtal>; clock-names = "slow_clk", "main_xtal"; }; mmc0: mmc@f8000000 { compatible = "atmel,hsmci"; reg = <0xf8000000 0x600>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(0))>; dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; clock-names = "mci_clk"; }; uart0: serial@f8004000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8004000 0x100>; atmel,usart-mode = ; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(22))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(23))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; clock-names = "usart"; status = "disabled"; }; ssc0: ssc@f8008000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf8008000 0x4000>; interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(26))>, <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(27))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 48>; clock-names = "pclk"; status = "disabled"; }; pwm0: pwm@f800c000 { compatible = "atmel,sama5d3-pwm"; reg = <0xf800c000 0x300>; interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; status = "disabled"; }; spi0: spi@f8010000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf8010000 0x100>; interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(10))>, <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(11))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; clock-names = "spi_clk"; status = "disabled"; }; i2c0: i2c@f8014000 { compatible = "atmel,sama5d4-i2c"; reg = <0xf8014000 0x4000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(2))>, <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(3))>; dma-names = "tx", "rx"; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; pinctrl-1 = <&pinctrl_i2c0_gpio>; sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; status = "disabled"; }; i2c1: i2c@f8018000 { compatible = "atmel,sama5d4-i2c"; reg = <0xf8018000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(4))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; scl-gpios = <&pioE 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; status = "disabled"; }; tcb0: timer@f801c000 { compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xf801c000 0x100>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 40>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; macb0: ethernet@f8020000 { compatible = "atmel,sama5d4-gem"; reg = <0xf8020000 0x100>; interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_PERIPHERAL 54>; clock-names = "hclk", "pclk"; status = "disabled"; }; i2c2: i2c@f8024000 { compatible = "atmel,sama5d4-i2c"; reg = <0xf8024000 0x4000>; interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(6))>, <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(7))>; dma-names = "tx", "rx"; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>; scl-gpios = <&pioB 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; status = "disabled"; }; sfr: sfr@f8028000 { compatible = "atmel,sama5d4-sfr", "syscon"; reg = <0xf8028000 0x60>; }; usart0: serial@f802c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf802c000 0x100>; atmel,usart-mode = ; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(36))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(37))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; clock-names = "usart"; status = "disabled"; }; usart1: serial@f8030000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8030000 0x100>; atmel,usart-mode = ; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(38))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(39))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; mmc1: mmc@fc000000 { compatible = "atmel,hsmci"; reg = <0xfc000000 0x600>; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(1))>; dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; clock-names = "mci_clk"; }; uart1: serial@fc004000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc004000 0x100>; atmel,usart-mode = ; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(24))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; clock-names = "usart"; status = "disabled"; }; usart2: serial@fc008000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; atmel,usart-mode = ; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(16))>, <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(17))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>; clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; clock-names = "usart"; status = "disabled"; }; usart3: serial@fc00c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; atmel,usart-mode = ; interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(18))>, <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(19))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; clock-names = "usart"; status = "disabled"; }; usart4: serial@fc010000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc010000 0x100>; atmel,usart-mode = ; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(20))>, <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(21))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart4>; clocks = <&pmc PMC_TYPE_PERIPHERAL 31>; clock-names = "usart"; status = "disabled"; }; ssc1: ssc@fc014000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfc014000 0x4000>; interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(28))>, <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(29))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 49>; clock-names = "pclk"; status = "disabled"; }; spi1: spi@fc018000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfc018000 0x100>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>; dmas = <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(12))>, <&dma1 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(13))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; clock-names = "spi_clk"; status = "disabled"; }; spi2: spi@fc01c000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfc01c000 0x100>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(14))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(15))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; clock-names = "spi_clk"; status = "disabled"; }; tcb1: timer@fc020000 { compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xfc020000 0x100>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; tcb2: timer@fc024000 { compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xfc024000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&clk32k>; clock-names = "t0_clk", "slow_clk"; }; macb1: ethernet@fc028000 { compatible = "atmel,sama5d4-gem"; reg = <0xfc028000 0x100>; interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_PERIPHERAL 55>; clock-names = "hclk", "pclk"; status = "disabled"; }; trng@fc030000 { compatible = "atmel,at91sam9g45-trng"; reg = <0xfc030000 0x100>; interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 53>; }; adc0: adc@fc034000 { compatible = "atmel,at91sam9x5-adc"; reg = <0xfc034000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>; clocks = <&pmc PMC_TYPE_PERIPHERAL 44>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0x01f>; atmel,adc-startup-time = <40>; atmel,adc-use-external-triggers; atmel,adc-vref = <3000>; atmel,adc-sample-hold-time = <11>; atmel,adc-ts-pressure-threshold = <10000>; status = "disabled"; }; aes: crypto@fc044000 { compatible = "atmel,at91sam9g46-aes"; reg = <0xfc044000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(41))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; clock-names = "aes_clk"; }; tdes: crpyto@fc04c000 { compatible = "atmel,at91sam9g46-tdes"; reg = <0xfc04c000 0x100>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(42))>, <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(43))>; dma-names = "tx", "rx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "tdes_clk"; }; sha: crypto@fc050000 { compatible = "atmel,at91sam9g46-sha"; reg = <0xfc050000 0x100>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(44))>; dma-names = "tx"; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "sha_clk"; }; hsmc: smc@fc05c000 { compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; reg = <0xfc05c000 0x1000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>; clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; #address-cells = <1>; #size-cells = <1>; ranges; pmecc: ecc-engine@ffffc070 { compatible = "atmel,sama5d4-pmecc"; reg = <0xfc05c070 0x490>, <0xfc05c500 0x100>; }; }; reset_controller: reset-controller@fc068600 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; clocks = <&clk32k>; }; shutdown_controller: poweroff@fc068610 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfc068610 0x10>; clocks = <&clk32k>; }; pit: timer@fc068630 { compatible = "atmel,at91sam9260-pit"; reg = <0xfc068630 0x10>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>; }; watchdog: watchdog@fc068640 { compatible = "atmel,sama5d4-wdt"; reg = <0xfc068640 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; status = "disabled"; }; clk32k: clock-controller@fc068650 { compatible = "atmel,sama5d4-sckc"; reg = <0xfc068650 0x4>; #clock-cells = <0>; clocks = <&slow_xtal>; }; rtc@fc0686b0 { compatible = "atmel,sama5d4-rtc"; reg = <0xfc0686b0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; }; dbgu: serial@fc069000 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; atmel,usart-mode = ; interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; clock-names = "usart"; status = "disabled"; }; pinctrl: pinctrl@fc06a000 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; ranges = <0xfc068000 0xfc068000 0x100 0xfc06a000 0xfc06a000 0x4000>; /* WARNING: revisit as pin spec has changed */ atmel,mux-mask = < /* A B C */ 0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */ 0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */ 0xffffffff 0x3ff83fff 0xff00ffff /* pioC */ 0xb003ff00 0x8002a800 0x00000000 /* pioD */ 0xffffffff 0x7fffffff 0x76fff1bf /* pioE */ >; pioA: gpio@fc06a000 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfc06a000 0x100>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; }; pioB: gpio@fc06b000 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfc06b000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; }; pioC: gpio@fc06c000 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfc06c000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; }; pioD: gpio@fc068000 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfc068000 0x100>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; pioE: gpio@fc06d000 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfc06d000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; }; /* pinctrl pin settings */ adc0 { pinctrl_adc0_adtrg: adc0_adtrg { atmel,pins = ; /* conflicts with USBA_VBUS */ }; pinctrl_adc0_ad0: adc0_ad0 { atmel,pins = ; }; pinctrl_adc0_ad1: adc0_ad1 { atmel,pins = ; }; pinctrl_adc0_ad2: adc0_ad2 { atmel,pins = ; }; pinctrl_adc0_ad3: adc0_ad3 { atmel,pins = ; }; pinctrl_adc0_ad4: adc0_ad4 { atmel,pins = ; }; }; dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = ; /* conflicts with D15 and TDO */ }; }; ebi { pinctrl_ebi_addr: ebi-addr-0 { atmel,pins = ; }; pinctrl_ebi_nand_addr: ebi-addr-1 { atmel,pins = ; }; pinctrl_ebi_cs0: ebi-cs0-0 { atmel,pins = ; }; pinctrl_ebi_cs1: ebi-cs1-0 { atmel,pins = ; }; pinctrl_ebi_cs2: ebi-cs2-0 { atmel,pins = ; }; pinctrl_ebi_cs3: ebi-cs3-0 { atmel,pins = ; }; pinctrl_ebi_data_0_7: ebi-data-lsb-0 { atmel,pins = ; }; pinctrl_ebi_data_8_15: ebi-data-msb-0 { atmel,pins = ; }; pinctrl_ebi_nandrdy: ebi-nandrdy-0 { atmel,pins = ; }; pinctrl_ebi_nrd_nandoe: ebi-nrd-nandoe-0 { atmel,pins = ; }; pinctrl_ebi_nwait: ebi-nwait-0 { atmel,pins = ; }; pinctrl_ebi_nwe_nandwe: ebi-nwe-nandwe-0 { atmel,pins = ; }; pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 { atmel,pins = ; }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = ; }; pinctrl_i2c0_gpio: i2c0-gpio { atmel,pins = ; }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = ; /* TWCK1, conflicts with UART0 TX and DIBN */ }; pinctrl_i2c1_gpio: i2c1-gpio { atmel,pins = ; }; }; i2c2 { pinctrl_i2c2: i2c2-0 { atmel,pins = ; /* TWCK2, conflicts with RF0 */ }; pinctrl_i2c2_gpio: i2c2-gpio { atmel,pins = ; }; }; isi { pinctrl_isi_data_0_7: isi-0-data-0-7 { atmel,pins = ; /* ISI_HSYNC */ }; pinctrl_isi_data_8_9: isi-0-data-8-9 { atmel,pins = ; /* ISI_D9, conflicts with SPI0_MOSI, PWML2 */ }; pinctrl_isi_data_10_11: isi-0-data-10-11 { atmel,pins = ; /* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */ }; }; lcd { pinctrl_lcd_base: lcd-base-0 { atmel,pins = ; /* LCDPCK */ }; pinctrl_lcd_pwm: lcd-pwm-0 { atmel,pins = ; /* LCDPWM */ }; pinctrl_lcd_rgb444: lcd-rgb-0 { atmel,pins = ; /* LCDD11 pin */ }; pinctrl_lcd_rgb565: lcd-rgb-1 { atmel,pins = ; /* LCDD15 pin */ }; pinctrl_lcd_rgb666: lcd-rgb-2 { atmel,pins = ; /* LCDD23 pin */ }; pinctrl_lcd_rgb777: lcd-rgb-3 { atmel,pins = /* LCDDAT0 conflicts with TMS */ ; /* LCDD23 pin */ }; pinctrl_lcd_rgb888: lcd-rgb-4 { atmel,pins = ; /* LCDD23 pin */ }; }; macb0 { pinctrl_macb0_rmii: macb0_rmii-0 { atmel,pins = ; }; }; macb1 { pinctrl_macb1_rmii: macb1_rmii-0 { atmel,pins = ; }; }; mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = ; }; pinctrl_mmc0_dat1_3: mmc0_dat1_3 { atmel,pins = ; }; pinctrl_mmc0_dat4_7: mmc0_dat4_7 { atmel,pins = ; }; }; mmc1 { pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { atmel,pins = ; }; pinctrl_mmc1_dat1_3: mmc1_dat1_3 { atmel,pins = ; }; }; nand0 { pinctrl_nand: nand-0 { atmel,pins = ; /* PC12 periph A Data bit 7 */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = ; }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx { atmel,pins = ; /* TD0 */ }; pinctrl_ssc0_rx: ssc0_rx { atmel,pins = ; /* RD0 */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx { atmel,pins = ; /* TD1 */ }; pinctrl_ssc1_rx: ssc1_rx { atmel,pins = ; /* RD1 */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = ; }; }; spi2 { pinctrl_spi2: spi2-0 { atmel,pins = ; }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = ; }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = ; }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = ; }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = ; }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = ; }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = ; }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = ; }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = ; }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = ; }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = ; /* conflicts with G0_RX3, PWMH1 */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = ; /* conflicts with G0_TXER, ISI_VSYNC */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = ; }; }; usart4 { pinctrl_usart4: usart4-0 { atmel,pins = ; }; pinctrl_usart4_rts: usart4_rts-0 { atmel,pins = ; /* conflicts with NWAIT, A19 */ }; pinctrl_usart4_cts: usart4_cts-0 { atmel,pins = ; /* conflicts with A0/NBS0, MCI0_CDB */ }; }; }; aic: interrupt-controller@fc06e000 { #interrupt-cells = <3>; compatible = "atmel,sama5d4-aic"; interrupt-controller; reg = <0xfc06e000 0x200>; atmel,external-irqs = <56>; }; }; }; };