// SPDX-License-Identifier: GPL-2.0-only // Copyright (C) 2014 Broadcom Corporation #include #include #include / { #address-cells = <1>; #size-cells = <1>; model = "BCM21664 SoC"; compatible = "brcm,bcm21664"; interrupt-parent = <&gic>; chosen { bootargs = "console=ttyS0,115200n8"; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; enable-method = "brcm,bcm11351-cpu-method"; secondary-boot-reg = <0x35004178>; reg = <1>; }; }; gic: interrupt-controller@3ff00100 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; reg = <0x3ff01000 0x1000>, <0x3ff00100 0x100>; }; smc@3404e000 { compatible = "brcm,bcm21664-smc", "brcm,kona-smc"; reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */ }; uartb: serial@3e000000 { compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; reg = <0x3e000000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; }; uartb2: serial@3e001000 { compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; reg = <0x3e001000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; }; uartb3: serial@3e002000 { compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; reg = <0x3e002000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; }; L2: cache-controller@3ff20000 { compatible = "arm,pl310-cache"; reg = <0x3ff20000 0x1000>; cache-unified; cache-level = <2>; }; brcm,resetmgr@35001f00 { compatible = "brcm,bcm21664-resetmgr"; reg = <0x35001f00 0x24>; }; timer@35006000 { compatible = "brcm,kona-timer"; reg = <0x35006000 0x1c>; interrupts = ; clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; }; gpio: gpio@35003000 { compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio"; reg = <0x35003000 0x524>; interrupts = ; #gpio-cells = <2>; #interrupt-cells = <2>; gpio-controller; interrupt-controller; }; sdio1: mmc@3f180000 { compatible = "brcm,kona-sdhci"; reg = <0x3f180000 0x801c>; interrupts = ; clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; status = "disabled"; }; sdio2: mmc@3f190000 { compatible = "brcm,kona-sdhci"; reg = <0x3f190000 0x801c>; interrupts = ; clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; status = "disabled"; }; sdio3: mmc@3f1a0000 { compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x801c>; interrupts = ; clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; status = "disabled"; }; sdio4: mmc@3f1b0000 { compatible = "brcm,kona-sdhci"; reg = <0x3f1b0000 0x801c>; interrupts = ; clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; status = "disabled"; }; bsc1: i2c@3e016000 { compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; reg = <0x3e016000 0x70>; interrupts = ; #address-cells = <1>; #size-cells = <0>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; status = "disabled"; }; bsc2: i2c@3e017000 { compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; reg = <0x3e017000 0x70>; interrupts = ; #address-cells = <1>; #size-cells = <0>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; status = "disabled"; }; bsc3: i2c@3e018000 { compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; reg = <0x3e018000 0x70>; interrupts = ; #address-cells = <1>; #size-cells = <0>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; status = "disabled"; }; bsc4: i2c@3e01c000 { compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c"; reg = <0x3e01c000 0x70>; interrupts = ; #address-cells = <1>; #size-cells = <0>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; status = "disabled"; }; clocks { #address-cells = <1>; #size-cells = <1>; ranges; /* * Fixed clocks are defined before CCUs whose * clocks may depend on them. */ ref_32k_clk: ref_32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; bbl_32k_clk: bbl_32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; ref_13m_clk: ref_13m { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; }; var_13m_clk: var_13m { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <13000000>; }; dft_19_5m_clk: dft_19_5m { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <19500000>; }; ref_crystal_clk: ref_crystal { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <26000000>; }; ref_52m_clk: ref_52m { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <52000000>; }; var_52m_clk: var_52m { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <52000000>; }; usb_otg_ahb_clk: usb_otg_ahb { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <52000000>; }; ref_96m_clk: ref_96m { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <96000000>; }; var_96m_clk: var_96m { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <96000000>; }; ref_104m_clk: ref_104m { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <104000000>; }; var_104m_clk: var_104m { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <104000000>; }; ref_156m_clk: ref_156m { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <156000000>; }; var_156m_clk: var_156m { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <156000000>; }; root_ccu: root_ccu@35001000 { compatible = "brcm,bcm21664-root-ccu"; reg = <0x35001000 0x0f00>; #clock-cells = <1>; clock-output-names = "frac_1m"; }; aon_ccu: aon_ccu@35002000 { compatible = "brcm,bcm21664-aon-ccu"; reg = <0x35002000 0x0f00>; #clock-cells = <1>; clock-output-names = "hub_timer"; }; master_ccu: master_ccu@3f001000 { compatible = "brcm,bcm21664-master-ccu"; reg = <0x3f001000 0x0f00>; #clock-cells = <1>; clock-output-names = "sdio1", "sdio2", "sdio3", "sdio4", "sdio1_sleep", "sdio2_sleep", "sdio3_sleep", "sdio4_sleep"; }; slave_ccu: slave_ccu@3e011000 { compatible = "brcm,bcm21664-slave-ccu"; reg = <0x3e011000 0x0f00>; #clock-cells = <1>; clock-output-names = "uartb", "uartb2", "uartb3", "bsc1", "bsc2", "bsc3", "bsc4"; }; }; usbotg: usb@3f120000 { compatible = "snps,dwc2"; reg = <0x3f120000 0x10000>; interrupts = ; clocks = <&usb_otg_ahb_clk>; clock-names = "otg"; phys = <&usbphy>; phy-names = "usb2-phy"; status = "disabled"; }; usbphy: usb-phy@3f130000 { compatible = "brcm,kona-usb2-phy"; reg = <0x3f130000 0x28>; #phy-cells = <0>; status = "disabled"; }; };