// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
 * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
 */

#include <dt-bindings/clock/bcm-nsp.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
	interrupt-parent = <&gic>;
	#address-cells = <1>;
	#size-cells = <1>;

	chipcommon-a-bus@18000000 {
		compatible = "simple-bus";
		ranges = <0x00000000 0x18000000 0x00001000>;
		#address-cells = <1>;
		#size-cells = <1>;

		uart0: serial@300 {
			compatible = "ns16550";
			reg = <0x0300 0x100>;
			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>;
			status = "disabled";
		};

		uart1: serial@400 {
			compatible = "ns16550";
			reg = <0x0400 0x100>;
			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&iprocslow>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinmux_uart1>;
			status = "disabled";
		};
	};

	mpcore-bus@19000000 {
		compatible = "simple-bus";
		ranges = <0x00000000 0x19000000 0x00023000>;
		#address-cells = <1>;
		#size-cells = <1>;

		scu@20000 {
			compatible = "arm,cortex-a9-scu";
			reg = <0x20000 0x100>;
		};

		timer@20200 {
			compatible = "arm,cortex-a9-global-timer";
			reg = <0x20200 0x100>;
			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
			clocks = <&periph_clk>;
		};

		timer@20600 {
			compatible = "arm,cortex-a9-twd-timer";
			reg = <0x20600 0x20>;
			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
						  IRQ_TYPE_EDGE_RISING)>;
			clocks = <&periph_clk>;
		};

		gic: interrupt-controller@21000 {
			compatible = "arm,cortex-a9-gic";
			#interrupt-cells = <3>;
			#address-cells = <0>;
			interrupt-controller;
			reg = <0x21000 0x1000>,
			      <0x20100 0x100>;
		};

		L2: cache-controller@22000 {
			compatible = "arm,pl310-cache";
			reg = <0x22000 0x1000>;
			cache-unified;
			arm,shared-override;
			prefetch-data = <1>;
			prefetch-instr = <1>;
			cache-level = <2>;
		};
	};

	axi@18000000 {
		compatible = "brcm,bus-axi";
		reg = <0x18000000 0x1000>;
		ranges = <0x00000000 0x18000000 0x00100000>;
		#address-cells = <1>;
		#size-cells = <1>;

		#interrupt-cells = <1>;
		interrupt-map-mask = <0x000fffff 0xffff>;
		interrupt-map =
			/* ChipCommon */
			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,

			/* Switch Register Access Block */
			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,

			/* PCIe Controller 0 */
			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,

			/* PCIe Controller 1 */
			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,

			/* PCIe Controller 2 */
			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,

			/* USB 2.0 Controller */
			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,

			/* USB 3.0 Controller */
			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,

			/* Ethernet Controller 0 */
			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,

			/* Ethernet Controller 1 */
			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,

			/* Ethernet Controller 2 */
			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,

			/* Ethernet Controller 3 */
			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,

			/* NAND Controller */
			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;

		chipcommon: chipcommon@0 {
			reg = <0x00000000 0x1000>;

			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		pcie0: pcie@12000 {
			reg = <0x00012000 0x1000>;

			#address-cells = <3>;
			#size-cells = <2>;
		};

		pcie1: pcie@13000 {
			reg = <0x00013000 0x1000>;

			#address-cells = <3>;
			#size-cells = <2>;
		};

		pcie2: pcie@14000 {
			reg = <0x00014000 0x1000>;

			#address-cells = <3>;
			#size-cells = <2>;
		};

		usb2: usb2@21000 {
			reg = <0x00021000 0x1000>;

			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			interrupt-parent = <&gic>;

			ehci: usb@21000 {
				compatible = "generic-ehci";
				reg = <0x00021000 0x1000>;
				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
				phys = <&usb2_phy>;

				#address-cells = <1>;
				#size-cells = <0>;

				ehci_port1: port@1 {
					reg = <1>;
					#trigger-source-cells = <0>;
				};

				ehci_port2: port@2 {
					reg = <2>;
					#trigger-source-cells = <0>;
				};
			};

			ohci: usb@22000 {
				compatible = "generic-ohci";
				reg = <0x00022000 0x1000>;
				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;

				#address-cells = <1>;
				#size-cells = <0>;

				ohci_port1: port@1 {
					reg = <1>;
					#trigger-source-cells = <0>;
				};

				ohci_port2: port@2 {
					reg = <2>;
					#trigger-source-cells = <0>;
				};
			};
		};

		usb3: usb3@23000 {
			reg = <0x00023000 0x1000>;

			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			interrupt-parent = <&gic>;

			xhci: usb@23000 {
				compatible = "generic-xhci";
				reg = <0x00023000 0x1000>;
				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
				phys = <&usb3_phy>;
				phy-names = "usb";

				#address-cells = <1>;
				#size-cells = <0>;

				xhci_port1: port@1 {
					reg = <1>;
					#trigger-source-cells = <0>;
				};
			};
		};

		gmac0: ethernet@24000 {
			reg = <0x24000 0x800>;
		};

		gmac1: ethernet@25000 {
			reg = <0x25000 0x800>;
		};

		gmac2: ethernet@26000 {
			reg = <0x26000 0x800>;
		};

		gmac3: ethernet@27000 {
			reg = <0x27000 0x800>;
		};
	};

	pwm: pwm@18002000 {
		compatible = "brcm,iproc-pwm";
		reg = <0x18002000 0x28>;
		clocks = <&osc>;
		#pwm-cells = <3>;
		status = "disabled";
	};

	mdio: mdio@18003000 {
		compatible = "brcm,iproc-mdio";
		reg = <0x18003000 0x8>;
		#size-cells = <0>;
		#address-cells = <1>;
	};

	rng: rng@18004000 {
		compatible = "brcm,bcm5301x-rng";
		reg = <0x18004000 0x14>;
	};

	srab: ethernet-switch@18007000 {
		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
		reg = <0x18007000 0x1000>;

		status = "disabled";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
			};

			port@1 {
				reg = <1>;
			};

			port@2 {
				reg = <2>;
			};

			port@3 {
				reg = <3>;
			};

			port@4 {
				reg = <4>;
			};

			port@5 {
				reg = <5>;
				ethernet = <&gmac0>;
			};

			port@7 {
				reg = <7>;
				ethernet = <&gmac1>;
			};

			port@8 {
				reg = <8>;
				ethernet = <&gmac2>;

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};
		};
	};

	uart2: serial@18008000 {
		compatible = "ns16550a";
		reg = <0x18008000 0x20>;
		clocks = <&iprocslow>;
		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
		reg-shift = <2>;
		status = "disabled";
	};

	dmu-bus@1800c000 {
		compatible = "simple-bus";
		ranges = <0 0x1800c000 0x1000>;
		#address-cells = <1>;
		#size-cells = <1>;

		cru-bus@100 {
			compatible = "brcm,ns-cru", "simple-mfd";
			reg = <0x100 0x1a4>;
			ranges;
			#address-cells = <1>;
			#size-cells = <1>;

			usb2_phy: phy@164 {
				compatible = "brcm,ns-usb2-phy";
				reg = <0x164 0x4>;
				brcm,syscon-clkset = <&cru_clkset>;
				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
				clock-names = "phy-ref-clk";
				#phy-cells = <0>;
			};

			cru_clkset: syscon@180 {
				compatible = "brcm,cru-clkset", "syscon";
				reg = <0x180 0x4>;
			};

			pinctrl: pinctrl@1c0 {
				compatible = "brcm,bcm4708-pinmux";
				reg = <0x1c0 0x24>;
				reg-names = "cru_gpio_control";

				spi-pins {
					groups = "spi_grp";
					function = "spi";
				};

				pinmux_i2c: i2c-pins {
					groups = "i2c_grp";
					function = "i2c";
				};

				pinmux_pwm: pwm-pins {
					groups = "pwm0_grp", "pwm1_grp",
						 "pwm2_grp", "pwm3_grp";
					function = "pwm";
				};

				pinmux_uart1: uart1-pins {
					groups = "uart1_grp";
					function = "uart1";
				};
			};

			thermal: thermal@2c0 {
				compatible = "brcm,ns-thermal";
				reg = <0x2c0 0x10>;
				#thermal-sensor-cells = <0>;
			};
		};
	};

	nand_controller: nand-controller@18028000 {
		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
		reg-names = "nand", "iproc-idm", "iproc-ext";
		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;

		#address-cells = <1>;
		#size-cells = <0>;

		brcm,nand-has-wp;
	};

	thermal-zones {
		cpu_thermal: cpu-thermal {
			polling-delay-passive = <0>;
			polling-delay = <1000>;
			coefficients = <(-556) 418000>;
			thermal-sensors = <&thermal>;

			trips {
				cpu-crit {
					temperature = <125000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
			};
		};
	};
};