// SPDX-License-Identifier: GPL-2.0+ /* * bdc.h - header for the BRCM BDC USB3.0 device controller * * Copyright (C) 2014 Broadcom Corporation * * Author: Ashwini Pahuja */ #ifndef __LINUX_BDC_H__ #define __LINUX_BDC_H__ #include #include #include #include #include #include #include #include #include #include #include #define BRCM_BDC_NAME "bdc" #define BRCM_BDC_DESC "Broadcom USB Device Controller driver" #define DMA_ADDR_INVALID (~(dma_addr_t)0) /* BDC command operation timeout in usec*/ #define BDC_CMD_TIMEOUT 1000 /* BDC controller operation timeout in usec*/ #define BDC_COP_TIMEOUT 500 /* * Maximum size of ep0 response buffer for ch9 requests, * the set_sel request uses 6 so far, the max. */ #define EP0_RESPONSE_BUFF 6 /* Start with SS as default */ #define EP0_MAX_PKT_SIZE 512 /* 64 entries in a SRR */ #define NUM_SR_ENTRIES 64 /* Num of bds per table */ #define NUM_BDS_PER_TABLE 32 /* Num of tables in bd list for control,bulk and Int ep */ #define NUM_TABLES 2 /* Num of tables in bd list for Isoch ep */ #define NUM_TABLES_ISOCH 6 /* U1 Timeout default: 248usec */ #define U1_TIMEOUT 0xf8 /* Interrupt coalescence in usec */ #define INT_CLS 500 /* Register offsets */ /* Configuration and Capability registers */ #define BDC_BDCCFG0 0x00 #define BDC_BDCCFG1 0x04 #define BDC_BDCCAP0 0x08 #define BDC_BDCCAP1 0x0c #define BDC_CMDPAR0 0x10 #define BDC_CMDPAR1 0x14 #define BDC_CMDPAR2 0x18 #define BDC_CMDSC 0x1c #define BDC_USPC 0x20 #define BDC_USPPMS 0x28 #define BDC_USPPM2 0x2c #define BDC_SPBBAL 0x38 #define BDC_SPBBAH 0x3c #define BDC_BDCSC 0x40 #define BDC_XSFNTF 0x4c #define BDC_DVCSA 0x50 #define BDC_DVCSB 0x54 #define BDC_EPSTS0 0x60 #define BDC_EPSTS1 0x64 #define BDC_EPSTS2 0x68 #define BDC_EPSTS3 0x6c #define BDC_EPSTS4 0x70 #define BDC_EPSTS5 0x74 #define BDC_EPSTS6 0x78 #define BDC_EPSTS7 0x7c #define BDC_SRRBAL(n) (0x200 + (n * 0x10)) #define BDC_SRRBAH(n) (0x204 + (n * 0x10)) #define BDC_SRRINT(n) (0x208 + (n * 0x10)) #define BDC_INTCTLS(n) (0x20c + (n * 0x10)) /* Extended capability regs */ #define BDC_FSCNOC 0xcd4 #define BDC_FSCNIC 0xce4 #define NUM_NCS(p) (p >> 28) /* Register bit fields and Masks */ /* BDC Configuration 0 */ #define BDC_PGS(p) (((p) & (0x7 << 8)) >> 8) #define BDC_SPB(p) (p & 0x7) /* BDC Capability1 */ #define BDC_P64 (1 << 0) /* BDC Command register */ #define BDC_CMD_FH 0xe #define BDC_CMD_DNC 0x6 #define BDC_CMD_EPO 0x4 #define BDC_CMD_BLA 0x3 #define BDC_CMD_EPC 0x2 #define BDC_CMD_DVC 0x1 #define BDC_CMD_CWS (0x1 << 5) #define BDC_CMD_CST(p) (((p) & (0xf << 6))>>6) #define BDC_CMD_EPN(p) ((p & 0x1f) << 10) #define BDC_SUB_CMD_ADD (0x1 << 17) #define BDC_SUB_CMD_FWK (0x4 << 17) /* Reset sequence number */ #define BDC_CMD_EPO_RST_SN (0x1 << 16) #define BDC_CMD_EP0_XSD (0x1 << 16) #define BDC_SUB_CMD_ADD_EP (0x1 << 17) #define BDC_SUB_CMD_DRP_EP (0x2 << 17) #define BDC_SUB_CMD_EP_STP (0x2 << 17) #define BDC_SUB_CMD_EP_STL (0x4 << 17) #define BDC_SUB_CMD_EP_RST (0x1 << 17) #define BDC_CMD_SRD (1 << 27) /* CMD completion status */ #define BDC_CMDS_SUCC 0x1 #define BDC_CMDS_PARA 0x3 #define BDC_CMDS_STAT 0x4 #define BDC_CMDS_FAIL 0x5 #define BDC_CMDS_INTL 0x6 #define BDC_CMDS_BUSY 0xf /* CMDSC Param 2 shifts */ #define EPT_SHIFT 22 #define MP_SHIFT 10 #define MB_SHIFT 6 #define EPM_SHIFT 4 /* BDC USPSC */ #define BDC_VBC (1 << 31) #define BDC_PRC (1 << 30) #define BDC_PCE (1 << 29) #define BDC_CFC (1 << 28) #define BDC_PCC (1 << 27) #define BDC_PSC (1 << 26) #define BDC_VBS (1 << 25) #define BDC_PRS (1 << 24) #define BDC_PCS (1 << 23) #define BDC_PSP(p) (((p) & (0x7 << 20))>>20) #define BDC_SCN (1 << 8) #define BDC_SDC (1 << 7) #define BDC_SWS (1 << 4) #define BDC_USPSC_RW (BDC_SCN|BDC_SDC|BDC_SWS|0xf) #define BDC_PSP(p) (((p) & (0x7 << 20))>>20) #define BDC_SPEED_FS 0x1 #define BDC_SPEED_LS 0x2 #define BDC_SPEED_HS 0x3 #define BDC_SPEED_SS 0x4 #define BDC_PST(p) (p & 0xf) #define BDC_PST_MASK 0xf /* USPPMS */ #define BDC_U2E (0x1 << 31) #define BDC_U1E (0x1 << 30) #define BDC_U2A (0x1 << 29) #define BDC_PORT_W1S (0x1 << 17) #define BDC_U1T(p) ((p) & 0xff) #define BDC_U2T(p) (((p) & 0xff) << 8) #define BDC_U1T_MASK 0xff /* USBPM2 */ /* Hardware LPM Enable */ #define BDC_HLE (1 << 16) /* BDC Status and Control */ #define BDC_COP_RST (1 << 29) #define BDC_COP_RUN (2 << 29) #define BDC_COP_STP (4 << 29) #define BDC_COP_MASK (BDC_COP_RST|BDC_COP_RUN|BDC_COP_STP) #define BDC_COS (1 << 28) #define BDC_CSTS(p) (((p) & (0x7 << 20)) >> 20) #define BDC_MASK_MCW (1 << 7) #define BDC_GIE (1 << 1) #define BDC_GIP (1 << 0) #define BDC_HLT 1 #define BDC_NOR 2 #define BDC_OIP 7 /* Buffer descriptor and Status report bit fields and masks */ #define BD_TYPE_BITMASK (0xf) #define BD_CHAIN 0xf #define BD_TFS_SHIFT 4 #define BD_SOT (1 << 26) #define BD_EOT (1 << 27) #define BD_ISP (1 << 29) #define BD_IOC (1 << 30) #define BD_SBF (1 << 31) #define BD_INTR_TARGET(p) (((p) & 0x1f) << 27) #define BDC_SRR_RWS (1 << 4) #define BDC_SRR_RST (1 << 3) #define BDC_SRR_ISR (1 << 2) #define BDC_SRR_IE (1 << 1) #define BDC_SRR_IP (1 << 0) #define BDC_SRR_EPI(p) (((p) & (0xff << 24)) >> 24) #define BDC_SRR_DPI(p) (((p) & (0xff << 16)) >> 16) #define BDC_SRR_DPI_MASK 0x00ff0000 #define MARK_CHAIN_BD (BD_CHAIN|BD_EOT|BD_SOT) /* Control transfer BD specific fields */ #define BD_DIR_IN (1 << 25) #define BDC_PTC_MASK 0xf0000000 /* status report defines */ #define SR_XSF 0 #define SR_USPC 4 #define SR_BD_LEN(p) (p & 0xffffff) #define XSF_SUCC 0x1 #define XSF_SHORT 0x3 #define XSF_BABB 0x4 #define XSF_SETUP_RECV 0x6 #define XSF_DATA_START 0x7 #define XSF_STATUS_START 0x8 #define XSF_STS(p) (((p) >> 28) & 0xf) /* Transfer BD fields */ #define BD_LEN(p) ((p) & 0x1ffff) #define BD_LTF (1 << 25) #define BD_TYPE_DS 0x1 #define BD_TYPE_SS 0x2 #define BDC_EP_ENABLED (1 << 0) #define BDC_EP_STALL (1 << 1) #define BDC_EP_STOP (1 << 2) /* One BD can transfer max 65536 bytes */ #define BD_MAX_BUFF_SIZE (1 << 16) /* Maximum bytes in one XFR, Refer to BDC spec */ #define MAX_XFR_LEN 16777215 /* defines for Force Header command */ #define DEV_NOTF_TYPE 6 #define FWK_SUBTYPE 1 #define TRA_PACKET 4 #define to_bdc_ep(e) container_of(e, struct bdc_ep, usb_ep) #define to_bdc_req(r) container_of(r, struct bdc_req, usb_req) #define gadget_to_bdc(g) container_of(g, struct bdc, gadget) /* FUNCTION WAKE DEV NOTIFICATION interval, USB3 spec table 8.13 */ #define BDC_TNOTIFY 2500 /*in ms*/ /* Devstatus bitfields */ #define REMOTE_WAKEUP_ISSUED (1 << 16) #define DEVICE_SUSPENDED (1 << 17) #define FUNC_WAKE_ISSUED (1 << 18) #define REMOTE_WAKE_ENABLE (1 << USB_DEVICE_REMOTE_WAKEUP) /* On disconnect, preserve these bits and clear rest */ #define DEVSTATUS_CLEAR (1 << USB_DEVICE_SELF_POWERED) /* Hardware and software Data structures */ /* Endpoint bd: buffer descriptor */ struct bdc_bd { __le32 offset[4]; }; /* Status report in Status report ring(srr) */ struct bdc_sr { __le32 offset[4]; }; /* bd_table: contiguous bd's in a table */ struct bd_table { struct bdc_bd *start_bd; /* dma address of start bd of table*/ dma_addr_t dma; }; /* * Each endpoint has a bdl(buffer descriptor list), bdl consists of 1 or more bd * table's chained to each other through a chain bd, every table has equal * number of bds. the software uses bdi(bd index) to refer to particular bd in * the list. */ struct bd_list { /* Array of bd table pointers*/ struct bd_table **bd_table_array; /* How many tables chained to each other */ int num_tabs; /* Max_bdi = num_tabs * num_bds_table - 1 */ int max_bdi; /* current enq bdi from sw point of view */ int eqp_bdi; /* current deq bdi from sw point of view */ int hwd_bdi; /* numbers of bds per table */ int num_bds_table; }; struct bdc_req; /* Representation of a transfer, one transfer can have multiple bd's */ struct bd_transfer { struct bdc_req *req; /* start bd index */ int start_bdi; /* this will be the next hw dqp when this transfer completes */ int next_hwd_bdi; /* number of bds in this transfer */ int num_bds; }; /* * Representation of a gadget request, every gadget request is contained * by 1 bd_transfer. */ struct bdc_req { struct usb_request usb_req; struct list_head queue; struct bdc_ep *ep; /* only one Transfer per request */ struct bd_transfer bd_xfr; int epnum; }; /* scratchpad buffer needed by bdc hardware */ struct bdc_scratchpad { dma_addr_t sp_dma; void *buff; u32 size; }; /* endpoint representation */ struct bdc_ep { struct usb_ep usb_ep; struct list_head queue; struct bdc *bdc; u8 ep_type; u8 dir; u8 ep_num; const struct usb_ss_ep_comp_descriptor *comp_desc; const struct usb_endpoint_descriptor *desc; unsigned int flags; char name[20]; /* endpoint bd list*/ struct bd_list bd_list; /* * HW generates extra event for multi bd tranfers, this flag helps in * ignoring the extra event */ bool ignore_next_sr; }; /* bdc cmmand parameter structure */ struct bdc_cmd_params { u32 param2; u32 param1; u32 param0; }; /* status report ring(srr), currently one srr is supported for entire system */ struct srr { struct bdc_sr *sr_bds; u16 eqp_index; u16 dqp_index; dma_addr_t dma_addr; }; /* EP0 states */ enum bdc_ep0_state { WAIT_FOR_SETUP = 0, WAIT_FOR_DATA_START, WAIT_FOR_DATA_XMIT, WAIT_FOR_STATUS_START, WAIT_FOR_STATUS_XMIT, STATUS_PENDING }; /* Link states */ enum bdc_link_state { BDC_LINK_STATE_U0 = 0x00, BDC_LINK_STATE_U3 = 0x03, BDC_LINK_STATE_RX_DET = 0x05, BDC_LINK_STATE_RESUME = 0x0f }; /* representation of bdc */ struct bdc { struct usb_gadget gadget; struct usb_gadget_driver *gadget_driver; struct device *dev; /* device lock */ spinlock_t lock; /* generic phy */ struct phy **phys; int num_phys; /* num of endpoints for a particular instantiation of IP */ unsigned int num_eps; /* * Array of ep's, it uses the same index covention as bdc hw i.e. * 1 for ep0, 2 for 1out,3 for 1in .... */ struct bdc_ep **bdc_ep_array; void __iomem *regs; struct bdc_scratchpad scratchpad; u32 sp_buff_size; /* current driver supports 1 status ring */ struct srr srr; /* Last received setup packet */ struct usb_ctrlrequest setup_pkt; struct bdc_req ep0_req; struct bdc_req status_req; enum bdc_ep0_state ep0_state; bool delayed_status; bool zlp_needed; bool reinit; bool pullup; /* Bits 0-15 are standard and 16-31 for proprietary information */ u32 devstatus; int irq; void *mem; u32 dev_addr; /* DMA pools */ struct dma_pool *bd_table_pool; u8 test_mode; /* array of callbacks for various status report handlers */ void (*sr_handler[2])(struct bdc *, struct bdc_sr *); /* ep0 callback handlers */ void (*sr_xsf_ep0[3])(struct bdc *, struct bdc_sr *); /* ep0 response buffer for ch9 requests like GET_STATUS and SET_SEL */ unsigned char ep0_response_buff[EP0_RESPONSE_BUFF]; /* * Timer to check if host resumed transfer after bdc sent Func wake * notification packet after a remote wakeup. if not, then resend the * Func Wake packet every 2.5 secs. Refer to USB3 spec section 8.5.6.4 */ struct delayed_work func_wake_notify; struct clk *clk; }; static inline u32 bdc_readl(void __iomem *base, u32 offset) { return readl(base + offset); } static inline void bdc_writel(void __iomem *base, u32 offset, u32 value) { writel(value, base + offset); } /* Buffer descriptor list operations */ void bdc_notify_xfr(struct bdc *, u32); void bdc_softconn(struct bdc *); void bdc_softdisconn(struct bdc *); int bdc_run(struct bdc *); int bdc_stop(struct bdc *); int bdc_reset(struct bdc *); int bdc_udc_init(struct bdc *); void bdc_udc_exit(struct bdc *); int bdc_reinit(struct bdc *); /* Status report handlers */ /* Upstream port status change sr */ void bdc_sr_uspc(struct bdc *, struct bdc_sr *); /* transfer sr */ void bdc_sr_xsf(struct bdc *, struct bdc_sr *); /* EP0 XSF handlers */ void bdc_xsf_ep0_setup_recv(struct bdc *, struct bdc_sr *); void bdc_xsf_ep0_data_start(struct bdc *, struct bdc_sr *); void bdc_xsf_ep0_status_start(struct bdc *, struct bdc_sr *); #endif /* __LINUX_BDC_H__ */