// SPDX-License-Identifier: GPL-2.0-only /* * Tegra20-specific VI implementation * * Copyright (C) 2023 SKIDATA GmbH * Author: Luca Ceresoli */ /* * This source file contains Tegra20 supported video formats, * VI and VIP SoC specific data, operations and registers accessors. */ #include #include #include #include #include #include #include "vip.h" #include "vi.h" #define TEGRA_VI_SYNCPT_WAIT_TIMEOUT msecs_to_jiffies(200) /* This are just good-sense numbers. The actual min/max is not documented. */ #define TEGRA20_MIN_WIDTH 32U #define TEGRA20_MIN_HEIGHT 32U #define TEGRA20_MAX_WIDTH 2048U #define TEGRA20_MAX_HEIGHT 2048U /* -------------------------------------------------------------------------- * Registers */ #define TEGRA_VI_CONT_SYNCPT_OUT_1 0x0060 #define VI_CONT_SYNCPT_OUT_1_CONTINUOUS_SYNCPT BIT(8) #define VI_CONT_SYNCPT_OUT_1_SYNCPT_IDX_SFT 0 #define TEGRA_VI_VI_INPUT_CONTROL 0x0088 #define VI_INPUT_FIELD_DETECT BIT(27) #define VI_INPUT_BT656 BIT(25) #define VI_INPUT_YUV_INPUT_FORMAT_SFT 8 /* bits [9:8] */ #define VI_INPUT_YUV_INPUT_FORMAT_UYVY (0 << VI_INPUT_YUV_INPUT_FORMAT_SFT) #define VI_INPUT_YUV_INPUT_FORMAT_VYUY (1 << VI_INPUT_YUV_INPUT_FORMAT_SFT) #define VI_INPUT_YUV_INPUT_FORMAT_YUYV (2 << VI_INPUT_YUV_INPUT_FORMAT_SFT) #define VI_INPUT_YUV_INPUT_FORMAT_YVYU (3 << VI_INPUT_YUV_INPUT_FORMAT_SFT) #define VI_INPUT_INPUT_FORMAT_SFT 2 /* bits [5:2] */ #define VI_INPUT_INPUT_FORMAT_YUV422 (0 << VI_INPUT_INPUT_FORMAT_SFT) #define VI_INPUT_VIP_INPUT_ENABLE BIT(1) #define TEGRA_VI_VI_CORE_CONTROL 0x008c #define VI_VI_CORE_CONTROL_PLANAR_CONV_IN_SEL_EXT BIT(31) #define VI_VI_CORE_CONTROL_CSC_INPUT_SEL_EXT BIT(30) #define VI_VI_CORE_CONTROL_INPUT_TO_ALT_MUX_SFT 27 #define VI_VI_CORE_CONTROL_INPUT_TO_CORE_EXT_SFT 24 #define VI_VI_CORE_CONTROL_OUTPUT_TO_ISP_EXT_SFT 21 #define VI_VI_CORE_CONTROL_ISP_HOST_STALL_OFF BIT(20) #define VI_VI_CORE_CONTROL_V_DOWNSCALING BIT(19) #define VI_VI_CORE_CONTROL_V_AVERAGING BIT(18) #define VI_VI_CORE_CONTROL_H_DOWNSCALING BIT(17) #define VI_VI_CORE_CONTROL_H_AVERAGING BIT(16) #define VI_VI_CORE_CONTROL_CSC_INPUT_SEL BIT(11) #define VI_VI_CORE_CONTROL_PLANAR_CONV_INPUT_SEL BIT(10) #define VI_VI_CORE_CONTROL_INPUT_TO_CORE_SFT 8 #define VI_VI_CORE_CONTROL_ISP_DOWNSAMPLE_SFT 5 #define VI_VI_CORE_CONTROL_OUTPUT_TO_EPP_SFT 2 #define VI_VI_CORE_CONTROL_OUTPUT_TO_ISP_SFT 0 #define TEGRA_VI_VI_FIRST_OUTPUT_CONTROL 0x0090 #define VI_OUTPUT_FORMAT_EXT BIT(22) #define VI_OUTPUT_V_DIRECTION BIT(20) #define VI_OUTPUT_H_DIRECTION BIT(19) #define VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT 17 #define VI_OUTPUT_YUV_OUTPUT_FORMAT_UYVY (0 << VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT) #define VI_OUTPUT_YUV_OUTPUT_FORMAT_VYUY (1 << VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT) #define VI_OUTPUT_YUV_OUTPUT_FORMAT_YUYV (2 << VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT) #define VI_OUTPUT_YUV_OUTPUT_FORMAT_YVYU (3 << VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT) #define VI_OUTPUT_OUTPUT_BYTE_SWAP BIT(16) #define VI_OUTPUT_LAST_PIXEL_DUPLICATION BIT(8) #define VI_OUTPUT_OUTPUT_FORMAT_SFT 0 #define VI_OUTPUT_OUTPUT_FORMAT_YUV422POST (3 << VI_OUTPUT_OUTPUT_FORMAT_SFT) #define VI_OUTPUT_OUTPUT_FORMAT_YUV420PLANAR (6 << VI_OUTPUT_OUTPUT_FORMAT_SFT) #define TEGRA_VI_VIP_H_ACTIVE 0x00a4 #define VI_VIP_H_ACTIVE_PERIOD_SFT 16 /* active pixels/line, must be even */ #define VI_VIP_H_ACTIVE_START_SFT 0 #define TEGRA_VI_VIP_V_ACTIVE 0x00a8 #define VI_VIP_V_ACTIVE_PERIOD_SFT 16 /* active lines */ #define VI_VIP_V_ACTIVE_START_SFT 0 #define TEGRA_VI_VB0_START_ADDRESS_FIRST 0x00c4 #define TEGRA_VI_VB0_BASE_ADDRESS_FIRST 0x00c8 #define TEGRA_VI_VB0_START_ADDRESS_U 0x00cc #define TEGRA_VI_VB0_BASE_ADDRESS_U 0x00d0 #define TEGRA_VI_VB0_START_ADDRESS_V 0x00d4 #define TEGRA_VI_VB0_BASE_ADDRESS_V 0x00d8 #define TEGRA_VI_FIRST_OUTPUT_FRAME_SIZE 0x00e0 #define VI_FIRST_OUTPUT_FRAME_HEIGHT_SFT 16 #define VI_FIRST_OUTPUT_FRAME_WIDTH_SFT 0 #define TEGRA_VI_VB0_COUNT_FIRST 0x00e4 #define TEGRA_VI_VB0_SIZE_FIRST 0x00e8 #define VI_VB0_SIZE_FIRST_V_SFT 16 #define VI_VB0_SIZE_FIRST_H_SFT 0 #define TEGRA_VI_VB0_BUFFER_STRIDE_FIRST 0x00ec #define VI_VB0_BUFFER_STRIDE_FIRST_CHROMA_SFT 30 #define VI_VB0_BUFFER_STRIDE_FIRST_LUMA_SFT 0 #define TEGRA_VI_H_LPF_CONTROL 0x0108 #define VI_H_LPF_CONTROL_CHROMA_SFT 16 #define VI_H_LPF_CONTROL_LUMA_SFT 0 #define TEGRA_VI_H_DOWNSCALE_CONTROL 0x010c #define TEGRA_VI_V_DOWNSCALE_CONTROL 0x0110 #define TEGRA_VI_VIP_INPUT_STATUS 0x0144 #define TEGRA_VI_VI_DATA_INPUT_CONTROL 0x0168 #define VI_DATA_INPUT_SFT 0 /* [11:0] = mask pin inputs to VI core */ #define TEGRA_VI_PIN_INPUT_ENABLE 0x016c #define VI_PIN_INPUT_VSYNC BIT(14) #define VI_PIN_INPUT_HSYNC BIT(13) #define VI_PIN_INPUT_VD_SFT 0 /* [11:0] = data bin N input enable */ #define TEGRA_VI_PIN_INVERSION 0x0174 #define VI_PIN_INVERSION_VSYNC_ACTIVE_HIGH BIT(1) #define VI_PIN_INVERSION_HSYNC_ACTIVE_HIGH BIT(0) #define TEGRA_VI_CAMERA_CONTROL 0x01a0 #define VI_CAMERA_CONTROL_STOP_CAPTURE BIT(2) #define VI_CAMERA_CONTROL_TEST_MODE BIT(1) #define VI_CAMERA_CONTROL_VIP_ENABLE BIT(0) #define TEGRA_VI_VI_ENABLE 0x01a4 #define VI_VI_ENABLE_SW_FLOW_CONTROL_OUT1 BIT(1) #define VI_VI_ENABLE_FIRST_OUTPUT_TO_MEM_DISABLE BIT(0) #define TEGRA_VI_VI_RAISE 0x01ac #define VI_VI_RAISE_ON_EDGE BIT(0) /* -------------------------------------------------------------------------- * VI */ static void tegra20_vi_write(struct tegra_vi_channel *chan, unsigned int addr, u32 val) { writel(val, chan->vi->iomem + addr); } /* * Get the main input format (YUV/RGB...) and the YUV variant as values to * be written into registers for the current VI input mbus code. */ static void tegra20_vi_get_input_formats(struct tegra_vi_channel *chan, unsigned int *main_input_format, unsigned int *yuv_input_format) { unsigned int input_mbus_code = chan->fmtinfo->code; (*main_input_format) = VI_INPUT_INPUT_FORMAT_YUV422; switch (input_mbus_code) { case MEDIA_BUS_FMT_UYVY8_2X8: (*yuv_input_format) = VI_INPUT_YUV_INPUT_FORMAT_UYVY; break; case MEDIA_BUS_FMT_VYUY8_2X8: (*yuv_input_format) = VI_INPUT_YUV_INPUT_FORMAT_VYUY; break; case MEDIA_BUS_FMT_YUYV8_2X8: (*yuv_input_format) = VI_INPUT_YUV_INPUT_FORMAT_YUYV; break; case MEDIA_BUS_FMT_YVYU8_2X8: (*yuv_input_format) = VI_INPUT_YUV_INPUT_FORMAT_YVYU; break; } } /* * Get the main output format (YUV/RGB...) and the YUV variant as values to * be written into registers for the current VI output pixel format. */ static void tegra20_vi_get_output_formats(struct tegra_vi_channel *chan, unsigned int *main_output_format, unsigned int *yuv_output_format) { u32 output_fourcc = chan->format.pixelformat; /* Default to YUV422 non-planar (U8Y8V8Y8) after downscaling */ (*main_output_format) = VI_OUTPUT_OUTPUT_FORMAT_YUV422POST; (*yuv_output_format) = VI_OUTPUT_YUV_OUTPUT_FORMAT_UYVY; switch (output_fourcc) { case V4L2_PIX_FMT_UYVY: (*yuv_output_format) = VI_OUTPUT_YUV_OUTPUT_FORMAT_UYVY; break; case V4L2_PIX_FMT_VYUY: (*yuv_output_format) = VI_OUTPUT_YUV_OUTPUT_FORMAT_VYUY; break; case V4L2_PIX_FMT_YUYV: (*yuv_output_format) = VI_OUTPUT_YUV_OUTPUT_FORMAT_YUYV; break; case V4L2_PIX_FMT_YVYU: (*yuv_output_format) = VI_OUTPUT_YUV_OUTPUT_FORMAT_YVYU; break; case V4L2_PIX_FMT_YUV420: case V4L2_PIX_FMT_YVU420: (*main_output_format) = VI_OUTPUT_OUTPUT_FORMAT_YUV420PLANAR; break; } } /* * Make the VI accessible (needed on Tegra20). * * This function writes an unknown bit into an unknown register. The code * comes from a downstream 3.1 kernel that has a working VIP driver for * Tegra20, and removing it makes the VI completely unaccessible. It should * be rewritten and possibly moved elsewhere, but the appropriate location * and implementation is unknown due to a total lack of documentation. */ static int tegra20_vi_enable(struct tegra_vi *vi, bool on) { /* from arch/arm/mach-tegra/iomap.h */ const phys_addr_t TEGRA_APB_MISC_BASE = 0x70000000; const unsigned long reg_offset = 0x42c; void __iomem *apb_misc; u32 val; apb_misc = ioremap(TEGRA_APB_MISC_BASE, PAGE_SIZE); if (!apb_misc) apb_misc = ERR_PTR(-ENOENT); if (IS_ERR(apb_misc)) return dev_err_probe(vi->dev, PTR_ERR(apb_misc), "cannot access APB_MISC"); val = readl(apb_misc + reg_offset); val &= ~BIT(0); val |= on ? BIT(0) : 0; writel(val, apb_misc + reg_offset); iounmap(apb_misc); return 0; } static int tegra20_channel_host1x_syncpt_init(struct tegra_vi_channel *chan) { struct tegra_vi *vi = chan->vi; struct host1x_syncpt *out_sp; out_sp = host1x_syncpt_request(&vi->client, HOST1X_SYNCPT_CLIENT_MANAGED); if (!out_sp) return dev_err_probe(vi->dev, -ENOMEM, "failed to request syncpoint\n"); chan->mw_ack_sp[0] = out_sp; return 0; } static void tegra20_channel_host1x_syncpt_free(struct tegra_vi_channel *chan) { host1x_syncpt_put(chan->mw_ack_sp[0]); } static void tegra20_fmt_align(struct v4l2_pix_format *pix, unsigned int bpp) { pix->width = clamp(pix->width, TEGRA20_MIN_WIDTH, TEGRA20_MAX_WIDTH); pix->height = clamp(pix->height, TEGRA20_MIN_HEIGHT, TEGRA20_MAX_HEIGHT); switch (pix->pixelformat) { case V4L2_PIX_FMT_UYVY: case V4L2_PIX_FMT_VYUY: case V4L2_PIX_FMT_YUYV: case V4L2_PIX_FMT_YVYU: pix->bytesperline = roundup(pix->width, 2) * 2; pix->sizeimage = roundup(pix->width, 2) * 2 * pix->height; break; case V4L2_PIX_FMT_YUV420: case V4L2_PIX_FMT_YVU420: pix->bytesperline = roundup(pix->width, 8); pix->sizeimage = roundup(pix->width, 8) * pix->height * 3 / 2; break; } } /* * Compute buffer offsets once per stream so that * tegra20_channel_vi_buffer_setup() only has to do very simple maths for * each buffer. */ static void tegra20_channel_queue_setup(struct tegra_vi_channel *chan) { unsigned int stride = chan->format.bytesperline; unsigned int height = chan->format.height; chan->start_offset = 0; switch (chan->format.pixelformat) { case V4L2_PIX_FMT_UYVY: case V4L2_PIX_FMT_VYUY: case V4L2_PIX_FMT_YUYV: case V4L2_PIX_FMT_YVYU: if (chan->vflip) chan->start_offset += stride * (height - 1); if (chan->hflip) chan->start_offset += stride - 1; break; case V4L2_PIX_FMT_YUV420: case V4L2_PIX_FMT_YVU420: chan->addr_offset_u = stride * height; chan->addr_offset_v = chan->addr_offset_u + stride * height / 4; /* For YVU420, we swap the locations of the U and V planes. */ if (chan->format.pixelformat == V4L2_PIX_FMT_YVU420) { unsigned long temp; temp = chan->addr_offset_u; chan->addr_offset_u = chan->addr_offset_v; chan->addr_offset_v = temp; } chan->start_offset_u = chan->addr_offset_u; chan->start_offset_v = chan->addr_offset_v; if (chan->vflip) { chan->start_offset += stride * (height - 1); chan->start_offset_u += (stride / 2) * ((height / 2) - 1); chan->start_offset_v += (stride / 2) * ((height / 2) - 1); } if (chan->hflip) { chan->start_offset += stride - 1; chan->start_offset_u += (stride / 2) - 1; chan->start_offset_v += (stride / 2) - 1; } break; } } static void release_buffer(struct tegra_vi_channel *chan, struct tegra_channel_buffer *buf, enum vb2_buffer_state state) { struct vb2_v4l2_buffer *vb = &buf->buf; vb->sequence = chan->sequence++; vb->field = V4L2_FIELD_NONE; vb->vb2_buf.timestamp = ktime_get_ns(); vb2_buffer_done(&vb->vb2_buf, state); } static void tegra20_channel_vi_buffer_setup(struct tegra_vi_channel *chan, struct tegra_channel_buffer *buf) { dma_addr_t base = buf->addr; switch (chan->fmtinfo->fourcc) { case V4L2_PIX_FMT_YUV420: case V4L2_PIX_FMT_YVU420: tegra20_vi_write(chan, TEGRA_VI_VB0_BASE_ADDRESS_U, base + chan->addr_offset_u); tegra20_vi_write(chan, TEGRA_VI_VB0_START_ADDRESS_U, base + chan->start_offset_u); tegra20_vi_write(chan, TEGRA_VI_VB0_BASE_ADDRESS_V, base + chan->addr_offset_v); tegra20_vi_write(chan, TEGRA_VI_VB0_START_ADDRESS_V, base + chan->start_offset_v); fallthrough; case V4L2_PIX_FMT_UYVY: case V4L2_PIX_FMT_VYUY: case V4L2_PIX_FMT_YUYV: case V4L2_PIX_FMT_YVYU: tegra20_vi_write(chan, TEGRA_VI_VB0_BASE_ADDRESS_FIRST, base); tegra20_vi_write(chan, TEGRA_VI_VB0_START_ADDRESS_FIRST, base + chan->start_offset); break; } } static int tegra20_channel_capture_frame(struct tegra_vi_channel *chan, struct tegra_channel_buffer *buf) { int err; chan->next_out_sp_idx++; tegra20_channel_vi_buffer_setup(chan, buf); tegra20_vi_write(chan, TEGRA_VI_CAMERA_CONTROL, VI_CAMERA_CONTROL_VIP_ENABLE); /* Wait for syncpt counter to reach frame start event threshold */ err = host1x_syncpt_wait(chan->mw_ack_sp[0], chan->next_out_sp_idx, TEGRA_VI_SYNCPT_WAIT_TIMEOUT, NULL); if (err) { host1x_syncpt_incr(chan->mw_ack_sp[0]); dev_err_ratelimited(&chan->video.dev, "frame start syncpt timeout: %d\n", err); release_buffer(chan, buf, VB2_BUF_STATE_ERROR); return err; } tegra20_vi_write(chan, TEGRA_VI_CAMERA_CONTROL, VI_CAMERA_CONTROL_STOP_CAPTURE | VI_CAMERA_CONTROL_VIP_ENABLE); release_buffer(chan, buf, VB2_BUF_STATE_DONE); return 0; } static int tegra20_chan_capture_kthread_start(void *data) { struct tegra_vi_channel *chan = data; struct tegra_channel_buffer *buf; unsigned int retries = 0; int err = 0; while (1) { /* * Source is not streaming if error is non-zero. * So, do not dequeue buffers on error and let the thread sleep * till kthread stop signal is received. */ wait_event_interruptible(chan->start_wait, kthread_should_stop() || (!list_empty(&chan->capture) && !err)); if (kthread_should_stop()) break; /* dequeue the buffer and start capture */ spin_lock(&chan->start_lock); if (list_empty(&chan->capture)) { spin_unlock(&chan->start_lock); continue; } buf = list_first_entry(&chan->capture, struct tegra_channel_buffer, queue); list_del_init(&buf->queue); spin_unlock(&chan->start_lock); err = tegra20_channel_capture_frame(chan, buf); if (!err) { retries = 0; continue; } if (retries++ > chan->syncpt_timeout_retry) vb2_queue_error(&chan->queue); else err = 0; } return 0; } static void tegra20_camera_capture_setup(struct tegra_vi_channel *chan) { u32 output_fourcc = chan->format.pixelformat; int width = chan->format.width; int height = chan->format.height; int stride_l = chan->format.bytesperline; int stride_c = (output_fourcc == V4L2_PIX_FMT_YUV420 || output_fourcc == V4L2_PIX_FMT_YVU420) ? 1 : 0; int main_output_format; int yuv_output_format; tegra20_vi_get_output_formats(chan, &main_output_format, &yuv_output_format); /* * Set up low pass filter. Use 0x240 for chromaticity and 0x240 * for luminance, which is the default and means not to touch * anything. */ tegra20_vi_write(chan, TEGRA_VI_H_LPF_CONTROL, 0x0240 << VI_H_LPF_CONTROL_LUMA_SFT | 0x0240 << VI_H_LPF_CONTROL_CHROMA_SFT); /* Set up raise-on-edge, so we get an interrupt on end of frame. */ tegra20_vi_write(chan, TEGRA_VI_VI_RAISE, VI_VI_RAISE_ON_EDGE); tegra20_vi_write(chan, TEGRA_VI_VI_FIRST_OUTPUT_CONTROL, (chan->vflip ? VI_OUTPUT_V_DIRECTION : 0) | (chan->hflip ? VI_OUTPUT_H_DIRECTION : 0) | yuv_output_format << VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT | main_output_format << VI_OUTPUT_OUTPUT_FORMAT_SFT); /* Set up frame size */ tegra20_vi_write(chan, TEGRA_VI_FIRST_OUTPUT_FRAME_SIZE, height << VI_FIRST_OUTPUT_FRAME_HEIGHT_SFT | width << VI_FIRST_OUTPUT_FRAME_WIDTH_SFT); /* First output memory enabled */ tegra20_vi_write(chan, TEGRA_VI_VI_ENABLE, 0); /* Set the number of frames in the buffer */ tegra20_vi_write(chan, TEGRA_VI_VB0_COUNT_FIRST, 1); /* Set up buffer frame size */ tegra20_vi_write(chan, TEGRA_VI_VB0_SIZE_FIRST, height << VI_VB0_SIZE_FIRST_V_SFT | width << VI_VB0_SIZE_FIRST_H_SFT); tegra20_vi_write(chan, TEGRA_VI_VB0_BUFFER_STRIDE_FIRST, stride_l << VI_VB0_BUFFER_STRIDE_FIRST_LUMA_SFT | stride_c << VI_VB0_BUFFER_STRIDE_FIRST_CHROMA_SFT); tegra20_vi_write(chan, TEGRA_VI_VI_ENABLE, 0); } static int tegra20_vi_start_streaming(struct vb2_queue *vq, u32 count) { struct tegra_vi_channel *chan = vb2_get_drv_priv(vq); struct media_pipeline *pipe = &chan->video.pipe; int err; chan->next_out_sp_idx = host1x_syncpt_read(chan->mw_ack_sp[0]); err = video_device_pipeline_start(&chan->video, pipe); if (err) goto error_pipeline_start; tegra20_camera_capture_setup(chan); err = tegra_channel_set_stream(chan, true); if (err) goto error_set_stream; chan->sequence = 0; chan->kthread_start_capture = kthread_run(tegra20_chan_capture_kthread_start, chan, "%s:0", chan->video.name); if (IS_ERR(chan->kthread_start_capture)) { err = PTR_ERR(chan->kthread_start_capture); chan->kthread_start_capture = NULL; dev_err_probe(&chan->video.dev, err, "failed to run capture kthread\n"); goto error_kthread_start; } return 0; error_kthread_start: tegra_channel_set_stream(chan, false); error_set_stream: video_device_pipeline_stop(&chan->video); error_pipeline_start: tegra_channel_release_buffers(chan, VB2_BUF_STATE_QUEUED); return err; } static void tegra20_vi_stop_streaming(struct vb2_queue *vq) { struct tegra_vi_channel *chan = vb2_get_drv_priv(vq); if (chan->kthread_start_capture) { kthread_stop(chan->kthread_start_capture); chan->kthread_start_capture = NULL; } tegra_channel_release_buffers(chan, VB2_BUF_STATE_ERROR); tegra_channel_set_stream(chan, false); video_device_pipeline_stop(&chan->video); } static const struct tegra_vi_ops tegra20_vi_ops = { .vi_enable = tegra20_vi_enable, .channel_host1x_syncpt_init = tegra20_channel_host1x_syncpt_init, .channel_host1x_syncpt_free = tegra20_channel_host1x_syncpt_free, .vi_fmt_align = tegra20_fmt_align, .channel_queue_setup = tegra20_channel_queue_setup, .vi_start_streaming = tegra20_vi_start_streaming, .vi_stop_streaming = tegra20_vi_stop_streaming, }; #define TEGRA20_VIDEO_FMT(MBUS_CODE, BPP, FOURCC) \ { \ .code = MEDIA_BUS_FMT_##MBUS_CODE, \ .bpp = BPP, \ .fourcc = V4L2_PIX_FMT_##FOURCC, \ } static const struct tegra_video_format tegra20_video_formats[] = { TEGRA20_VIDEO_FMT(UYVY8_2X8, 2, UYVY), TEGRA20_VIDEO_FMT(VYUY8_2X8, 2, VYUY), TEGRA20_VIDEO_FMT(YUYV8_2X8, 2, YUYV), TEGRA20_VIDEO_FMT(YVYU8_2X8, 2, YVYU), TEGRA20_VIDEO_FMT(UYVY8_2X8, 1, YUV420), TEGRA20_VIDEO_FMT(UYVY8_2X8, 1, YVU420), }; const struct tegra_vi_soc tegra20_vi_soc = { .video_formats = tegra20_video_formats, .nformats = ARRAY_SIZE(tegra20_video_formats), .default_video_format = &tegra20_video_formats[0], .ops = &tegra20_vi_ops, .vi_max_channels = 1, /* parallel input (VIP) */ .vi_max_clk_hz = 150000000, .has_h_v_flip = true, }; /* -------------------------------------------------------------------------- * VIP */ /* * VIP-specific configuration for stream start. * * Whatever is common among VIP and CSI is done by the VI component (see * tegra20_vi_start_streaming()). Here we do what is VIP-specific. */ static int tegra20_vip_start_streaming(struct tegra_vip_channel *vip_chan) { struct tegra_vi_channel *vi_chan = v4l2_get_subdev_hostdata(&vip_chan->subdev); int width = vi_chan->format.width; int height = vi_chan->format.height; unsigned int main_input_format; unsigned int yuv_input_format; tegra20_vi_get_input_formats(vi_chan, &main_input_format, &yuv_input_format); tegra20_vi_write(vi_chan, TEGRA_VI_VI_CORE_CONTROL, 0); tegra20_vi_write(vi_chan, TEGRA_VI_VI_INPUT_CONTROL, VI_INPUT_VIP_INPUT_ENABLE | main_input_format | yuv_input_format); tegra20_vi_write(vi_chan, TEGRA_VI_V_DOWNSCALE_CONTROL, 0); tegra20_vi_write(vi_chan, TEGRA_VI_H_DOWNSCALE_CONTROL, 0); tegra20_vi_write(vi_chan, TEGRA_VI_VIP_V_ACTIVE, height << VI_VIP_V_ACTIVE_PERIOD_SFT); tegra20_vi_write(vi_chan, TEGRA_VI_VIP_H_ACTIVE, roundup(width, 2) << VI_VIP_H_ACTIVE_PERIOD_SFT); /* * For VIP, D9..D2 is mapped to the video decoder's P7..P0. * Disable/mask out the other Dn wires. When not in BT656 * mode we also need the V/H sync. */ tegra20_vi_write(vi_chan, TEGRA_VI_PIN_INPUT_ENABLE, GENMASK(9, 2) << VI_PIN_INPUT_VD_SFT | VI_PIN_INPUT_HSYNC | VI_PIN_INPUT_VSYNC); tegra20_vi_write(vi_chan, TEGRA_VI_VI_DATA_INPUT_CONTROL, GENMASK(9, 2) << VI_DATA_INPUT_SFT); tegra20_vi_write(vi_chan, TEGRA_VI_PIN_INVERSION, 0); tegra20_vi_write(vi_chan, TEGRA_VI_CONT_SYNCPT_OUT_1, VI_CONT_SYNCPT_OUT_1_CONTINUOUS_SYNCPT | host1x_syncpt_id(vi_chan->mw_ack_sp[0]) << VI_CONT_SYNCPT_OUT_1_SYNCPT_IDX_SFT); tegra20_vi_write(vi_chan, TEGRA_VI_CAMERA_CONTROL, VI_CAMERA_CONTROL_STOP_CAPTURE); return 0; } static const struct tegra_vip_ops tegra20_vip_ops = { .vip_start_streaming = tegra20_vip_start_streaming, }; const struct tegra_vip_soc tegra20_vip_soc = { .ops = &tegra20_vip_ops, };