/******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * * Copyright (C) 2004-2008 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * * * * This program is free software; you can redistribute it and/or * * modify it under the terms of version 2 of the GNU General * * Public License as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful. * * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * * TO BE LEGALLY INVALID. See the GNU General Public License for * * more details, a copy of which can be found in the file COPYING * * included with this package. * *******************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "lpfc_hw.h" #include "lpfc_sli.h" #include "lpfc_nl.h" #include "lpfc_disc.h" #include "lpfc_scsi.h" #include "lpfc.h" #include "lpfc_logmsg.h" #include "lpfc_crtn.h" #include "lpfc_vport.h" #include "lpfc_version.h" static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int); static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *); static int lpfc_post_rcv_buf(struct lpfc_hba *); static struct scsi_transport_template *lpfc_transport_template = NULL; static struct scsi_transport_template *lpfc_vport_transport_template = NULL; static DEFINE_IDR(lpfc_hba_index); /** * lpfc_config_port_prep: Perform lpfc initialization prior to config port. * @phba: pointer to lpfc hba data structure. * * This routine will do LPFC initialization prior to issuing the CONFIG_PORT * mailbox command. It retrieves the revision information from the HBA and * collects the Vital Product Data (VPD) about the HBA for preparing the * configuration of the HBA. * * Return codes: * 0 - success. * -ERESTART - requests the SLI layer to reset the HBA and try again. * Any other value - indicates an error. **/ int lpfc_config_port_prep(struct lpfc_hba *phba) { lpfc_vpd_t *vp = &phba->vpd; int i = 0, rc; LPFC_MBOXQ_t *pmb; MAILBOX_t *mb; char *lpfc_vpd_data = NULL; uint16_t offset = 0; static char licensed[56] = "key unlock for use with gnu public licensed code only\0"; static int init_key = 1; pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmb) { phba->link_state = LPFC_HBA_ERROR; return -ENOMEM; } mb = &pmb->mb; phba->link_state = LPFC_INIT_MBX_CMDS; if (lpfc_is_LC_HBA(phba->pcidev->device)) { if (init_key) { uint32_t *ptext = (uint32_t *) licensed; for (i = 0; i < 56; i += sizeof (uint32_t), ptext++) *ptext = cpu_to_be32(*ptext); init_key = 0; } lpfc_read_nv(phba, pmb); memset((char*)mb->un.varRDnvp.rsvd3, 0, sizeof (mb->un.varRDnvp.rsvd3)); memcpy((char*)mb->un.varRDnvp.rsvd3, licensed, sizeof (licensed)); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, "0324 Config Port initialization " "error, mbxCmd x%x READ_NVPARM, " "mbxStatus x%x\n", mb->mbxCommand, mb->mbxStatus); mempool_free(pmb, phba->mbox_mem_pool); return -ERESTART; } memcpy(phba->wwnn, (char *)mb->un.varRDnvp.nodename, sizeof(phba->wwnn)); memcpy(phba->wwpn, (char *)mb->un.varRDnvp.portname, sizeof(phba->wwpn)); } phba->sli3_options = 0x0; /* Setup and issue mailbox READ REV command */ lpfc_read_rev(phba, pmb); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0439 Adapter failed to init, mbxCmd x%x " "READ_REV, mbxStatus x%x\n", mb->mbxCommand, mb->mbxStatus); mempool_free( pmb, phba->mbox_mem_pool); return -ERESTART; } /* * The value of rr must be 1 since the driver set the cv field to 1. * This setting requires the FW to set all revision fields. */ if (mb->un.varRdRev.rr == 0) { vp->rev.rBit = 0; lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0440 Adapter failed to init, READ_REV has " "missing revision information.\n"); mempool_free(pmb, phba->mbox_mem_pool); return -ERESTART; } if (phba->sli_rev == 3 && !mb->un.varRdRev.v3rsp) { mempool_free(pmb, phba->mbox_mem_pool); return -EINVAL; } /* Save information as VPD data */ vp->rev.rBit = 1; memcpy(&vp->sli3Feat, &mb->un.varRdRev.sli3Feat, sizeof(uint32_t)); vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev; memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16); vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev; memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16); vp->rev.biuRev = mb->un.varRdRev.biuRev; vp->rev.smRev = mb->un.varRdRev.smRev; vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev; vp->rev.endecRev = mb->un.varRdRev.endecRev; vp->rev.fcphHigh = mb->un.varRdRev.fcphHigh; vp->rev.fcphLow = mb->un.varRdRev.fcphLow; vp->rev.feaLevelHigh = mb->un.varRdRev.feaLevelHigh; vp->rev.feaLevelLow = mb->un.varRdRev.feaLevelLow; vp->rev.postKernRev = mb->un.varRdRev.postKernRev; vp->rev.opFwRev = mb->un.varRdRev.opFwRev; /* If the sli feature level is less then 9, we must * tear down all RPIs and VPIs on link down if NPIV * is enabled. */ if (vp->rev.feaLevelHigh < 9) phba->sli3_options |= LPFC_SLI3_VPORT_TEARDOWN; if (lpfc_is_LC_HBA(phba->pcidev->device)) memcpy(phba->RandomData, (char *)&mb->un.varWords[24], sizeof (phba->RandomData)); /* Get adapter VPD information */ lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL); if (!lpfc_vpd_data) goto out_free_mbox; do { lpfc_dump_mem(phba, pmb, offset); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0441 VPD not present on adapter, " "mbxCmd x%x DUMP VPD, mbxStatus x%x\n", mb->mbxCommand, mb->mbxStatus); mb->un.varDmp.word_cnt = 0; } if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset) mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset; lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET, lpfc_vpd_data + offset, mb->un.varDmp.word_cnt); offset += mb->un.varDmp.word_cnt; } while (mb->un.varDmp.word_cnt && offset < DMP_VPD_SIZE); lpfc_parse_vpd(phba, lpfc_vpd_data, offset); kfree(lpfc_vpd_data); out_free_mbox: mempool_free(pmb, phba->mbox_mem_pool); return 0; } /** * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd. * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * * This is the completion handler for driver's configuring asynchronous event * mailbox command to the device. If the mailbox command returns successfully, * it will set internal async event support flag to 1; otherwise, it will * set internal async event support flag to 0. **/ static void lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) { if (pmboxq->mb.mbxStatus == MBX_SUCCESS) phba->temp_sensor_support = 1; else phba->temp_sensor_support = 0; mempool_free(pmboxq, phba->mbox_mem_pool); return; } /** * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox * command used for getting wake up parameters. * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * * This is the completion handler for dump mailbox command for getting * wake up parameters. When this command complete, the response contain * Option rom version of the HBA. This function translate the version number * into a human readable string and store it in OptionROMVersion. **/ static void lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) { struct prog_id *prg; uint32_t prog_id_word; char dist = ' '; /* character array used for decoding dist type. */ char dist_char[] = "nabx"; if (pmboxq->mb.mbxStatus != MBX_SUCCESS) return; prg = (struct prog_id *) &prog_id_word; /* word 7 contain option rom version */ prog_id_word = pmboxq->mb.un.varWords[7]; /* Decode the Option rom version word to a readable string */ if (prg->dist < 4) dist = dist_char[prg->dist]; if ((prg->dist == 3) && (prg->num == 0)) sprintf(phba->OptionROMVersion, "%d.%d%d", prg->ver, prg->rev, prg->lev); else sprintf(phba->OptionROMVersion, "%d.%d%d%c%d", prg->ver, prg->rev, prg->lev, dist, prg->num); return; } /** * lpfc_config_port_post: Perform lpfc initialization after config port. * @phba: pointer to lpfc hba data structure. * * This routine will do LPFC initialization after the CONFIG_PORT mailbox * command call. It performs all internal resource and state setups on the * port: post IOCB buffers, enable appropriate host interrupt attentions, * ELS ring timers, etc. * * Return codes * 0 - success. * Any other value - error. **/ int lpfc_config_port_post(struct lpfc_hba *phba) { struct lpfc_vport *vport = phba->pport; LPFC_MBOXQ_t *pmb; MAILBOX_t *mb; struct lpfc_dmabuf *mp; struct lpfc_sli *psli = &phba->sli; uint32_t status, timeout; int i, j; int rc; spin_lock_irq(&phba->hbalock); /* * If the Config port completed correctly the HBA is not * over heated any more. */ if (phba->over_temp_state == HBA_OVER_TEMP) phba->over_temp_state = HBA_NORMAL_TEMP; spin_unlock_irq(&phba->hbalock); pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmb) { phba->link_state = LPFC_HBA_ERROR; return -ENOMEM; } mb = &pmb->mb; /* Get login parameters for NID. */ lpfc_read_sparam(phba, pmb, 0); pmb->vport = vport; if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0448 Adapter failed init, mbxCmd x%x " "READ_SPARM mbxStatus x%x\n", mb->mbxCommand, mb->mbxStatus); phba->link_state = LPFC_HBA_ERROR; mp = (struct lpfc_dmabuf *) pmb->context1; mempool_free( pmb, phba->mbox_mem_pool); lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); return -EIO; } mp = (struct lpfc_dmabuf *) pmb->context1; memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm)); lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); pmb->context1 = NULL; if (phba->cfg_soft_wwnn) u64_to_wwn(phba->cfg_soft_wwnn, vport->fc_sparam.nodeName.u.wwn); if (phba->cfg_soft_wwpn) u64_to_wwn(phba->cfg_soft_wwpn, vport->fc_sparam.portName.u.wwn); memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, sizeof (struct lpfc_name)); memcpy(&vport->fc_portname, &vport->fc_sparam.portName, sizeof (struct lpfc_name)); /* If no serial number in VPD data, use low 6 bytes of WWNN */ /* This should be consolidated into parse_vpd ? - mr */ if (phba->SerialNumber[0] == 0) { uint8_t *outptr; outptr = &vport->fc_nodename.u.s.IEEE[0]; for (i = 0; i < 12; i++) { status = *outptr++; j = ((status & 0xf0) >> 4); if (j <= 9) phba->SerialNumber[i] = (char)((uint8_t) 0x30 + (uint8_t) j); else phba->SerialNumber[i] = (char)((uint8_t) 0x61 + (uint8_t) (j - 10)); i++; j = (status & 0xf); if (j <= 9) phba->SerialNumber[i] = (char)((uint8_t) 0x30 + (uint8_t) j); else phba->SerialNumber[i] = (char)((uint8_t) 0x61 + (uint8_t) (j - 10)); } } lpfc_read_config(phba, pmb); pmb->vport = vport; if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0453 Adapter failed to init, mbxCmd x%x " "READ_CONFIG, mbxStatus x%x\n", mb->mbxCommand, mb->mbxStatus); phba->link_state = LPFC_HBA_ERROR; mempool_free( pmb, phba->mbox_mem_pool); return -EIO; } /* Reset the DFT_HBA_Q_DEPTH to the max xri */ if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1)) phba->cfg_hba_queue_depth = mb->un.varRdConfig.max_xri + 1; phba->lmt = mb->un.varRdConfig.lmt; /* Get the default values for Model Name and Description */ lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc); if ((phba->cfg_link_speed > LINK_SPEED_10G) || ((phba->cfg_link_speed == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) || ((phba->cfg_link_speed == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) || ((phba->cfg_link_speed == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) || ((phba->cfg_link_speed == LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) || ((phba->cfg_link_speed == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb))) { /* Reset link speed to auto */ lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT, "1302 Invalid speed for this board: " "Reset link speed to auto: x%x\n", phba->cfg_link_speed); phba->cfg_link_speed = LINK_SPEED_AUTO; } phba->link_state = LPFC_LINK_DOWN; /* Only process IOCBs on ELS ring till hba_state is READY */ if (psli->ring[psli->extra_ring].cmdringaddr) psli->ring[psli->extra_ring].flag |= LPFC_STOP_IOCB_EVENT; if (psli->ring[psli->fcp_ring].cmdringaddr) psli->ring[psli->fcp_ring].flag |= LPFC_STOP_IOCB_EVENT; if (psli->ring[psli->next_ring].cmdringaddr) psli->ring[psli->next_ring].flag |= LPFC_STOP_IOCB_EVENT; /* Post receive buffers for desired rings */ if (phba->sli_rev != 3) lpfc_post_rcv_buf(phba); /* * Configure HBA MSI-X attention conditions to messages if MSI-X mode */ if (phba->intr_type == MSIX) { rc = lpfc_config_msi(phba, pmb); if (rc) { mempool_free(pmb, phba->mbox_mem_pool); return -EIO; } rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, "0352 Config MSI mailbox command " "failed, mbxCmd x%x, mbxStatus x%x\n", pmb->mb.mbxCommand, pmb->mb.mbxStatus); mempool_free(pmb, phba->mbox_mem_pool); return -EIO; } } /* Initialize ERATT handling flag */ phba->hba_flag &= ~HBA_ERATT_HANDLED; /* Enable appropriate host interrupts */ spin_lock_irq(&phba->hbalock); status = readl(phba->HCregaddr); status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA; if (psli->num_rings > 0) status |= HC_R0INT_ENA; if (psli->num_rings > 1) status |= HC_R1INT_ENA; if (psli->num_rings > 2) status |= HC_R2INT_ENA; if (psli->num_rings > 3) status |= HC_R3INT_ENA; if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) && (phba->cfg_poll & DISABLE_FCP_RING_INT)) status &= ~(HC_R0INT_ENA); writel(status, phba->HCregaddr); readl(phba->HCregaddr); /* flush */ spin_unlock_irq(&phba->hbalock); /* Set up ring-0 (ELS) timer */ timeout = phba->fc_ratov * 2; mod_timer(&vport->els_tmofunc, jiffies + HZ * timeout); /* Set up heart beat (HB) timer */ mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL); phba->hb_outstanding = 0; phba->last_completion_time = jiffies; /* Set up error attention (ERATT) polling timer */ mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL); lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed); pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; lpfc_set_loopback_flag(phba); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0454 Adapter failed to init, mbxCmd x%x " "INIT_LINK, mbxStatus x%x\n", mb->mbxCommand, mb->mbxStatus); /* Clear all interrupt enable conditions */ writel(0, phba->HCregaddr); readl(phba->HCregaddr); /* flush */ /* Clear all pending interrupts */ writel(0xffffffff, phba->HAregaddr); readl(phba->HAregaddr); /* flush */ phba->link_state = LPFC_HBA_ERROR; if (rc != MBX_BUSY) mempool_free(pmb, phba->mbox_mem_pool); return -EIO; } /* MBOX buffer will be freed in mbox compl */ pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); lpfc_config_async(phba, pmb, LPFC_ELS_RING); pmb->mbox_cmpl = lpfc_config_async_cmpl; pmb->vport = phba->pport; rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0456 Adapter failed to issue " "ASYNCEVT_ENABLE mbox status x%x \n.", rc); mempool_free(pmb, phba->mbox_mem_pool); } /* Get Option rom version */ pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); lpfc_dump_wakeup_param(phba, pmb); pmb->mbox_cmpl = lpfc_dump_wakeup_param_cmpl; pmb->vport = phba->pport; rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0435 Adapter failed " "to get Option ROM version status x%x\n.", rc); mempool_free(pmb, phba->mbox_mem_pool); } return 0; } /** * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset. * @phba: pointer to lpfc HBA data structure. * * This routine will do LPFC uninitialization before the HBA is reset when * bringing down the SLI Layer. * * Return codes * 0 - success. * Any other value - error. **/ int lpfc_hba_down_prep(struct lpfc_hba *phba) { struct lpfc_vport **vports; int i; /* Disable interrupts */ writel(0, phba->HCregaddr); readl(phba->HCregaddr); /* flush */ if (phba->pport->load_flag & FC_UNLOADING) lpfc_cleanup_discovery_resources(phba->pport); else { vports = lpfc_create_vport_work_array(phba); if (vports != NULL) for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) lpfc_cleanup_discovery_resources(vports[i]); lpfc_destroy_vport_work_array(phba, vports); } return 0; } /** * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset. * @phba: pointer to lpfc HBA data structure. * * This routine will do uninitialization after the HBA is reset when bring * down the SLI Layer. * * Return codes * 0 - sucess. * Any other value - error. **/ int lpfc_hba_down_post(struct lpfc_hba *phba) { struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; struct lpfc_dmabuf *mp, *next_mp; struct lpfc_iocbq *iocb; IOCB_t *cmd = NULL; LIST_HEAD(completions); int i; if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) lpfc_sli_hbqbuf_free_all(phba); else { /* Cleanup preposted buffers on the ELS ring */ pring = &psli->ring[LPFC_ELS_RING]; list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) { list_del(&mp->list); pring->postbufq_cnt--; lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); } } spin_lock_irq(&phba->hbalock); for (i = 0; i < psli->num_rings; i++) { pring = &psli->ring[i]; /* At this point in time the HBA is either reset or DOA. Either * way, nothing should be on txcmplq as it will NEVER complete. */ list_splice_init(&pring->txcmplq, &completions); pring->txcmplq_cnt = 0; spin_unlock_irq(&phba->hbalock); while (!list_empty(&completions)) { iocb = list_get_first(&completions, struct lpfc_iocbq, list); cmd = &iocb->iocb; list_del_init(&iocb->list); if (!iocb->iocb_cmpl) lpfc_sli_release_iocbq(phba, iocb); else { cmd->ulpStatus = IOSTAT_LOCAL_REJECT; cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; (iocb->iocb_cmpl) (phba, iocb, iocb); } } lpfc_sli_abort_iocb_ring(phba, pring); spin_lock_irq(&phba->hbalock); } spin_unlock_irq(&phba->hbalock); return 0; } /** * lpfc_hb_timeout: The HBA-timer timeout handler. * @ptr: unsigned long holds the pointer to lpfc hba data structure. * * This is the HBA-timer timeout handler registered to the lpfc driver. When * this timer fires, a HBA timeout event shall be posted to the lpfc driver * work-port-events bitmap and the worker thread is notified. This timeout * event will be used by the worker thread to invoke the actual timeout * handler routine, lpfc_hb_timeout_handler. Any periodical operations will * be performed in the timeout handler and the HBA timeout event bit shall * be cleared by the worker thread after it has taken the event bitmap out. **/ static void lpfc_hb_timeout(unsigned long ptr) { struct lpfc_hba *phba; uint32_t tmo_posted; unsigned long iflag; phba = (struct lpfc_hba *)ptr; /* Check for heart beat timeout conditions */ spin_lock_irqsave(&phba->pport->work_port_lock, iflag); tmo_posted = phba->pport->work_port_events & WORKER_HB_TMO; if (!tmo_posted) phba->pport->work_port_events |= WORKER_HB_TMO; spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag); /* Tell the worker thread there is work to do */ if (!tmo_posted) lpfc_worker_wake_up(phba); return; } /** * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function. * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * * This is the callback function to the lpfc heart-beat mailbox command. * If configured, the lpfc driver issues the heart-beat mailbox command to * the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the * heart-beat mailbox command is issued, the driver shall set up heart-beat * timeout timer to LPFC_HB_MBOX_TIMEOUT (current 30) seconds and marks * heart-beat outstanding state. Once the mailbox command comes back and * no error conditions detected, the heart-beat mailbox command timer is * reset to LPFC_HB_MBOX_INTERVAL seconds and the heart-beat outstanding * state is cleared for the next heart-beat. If the timer expired with the * heart-beat outstanding state set, the driver will put the HBA offline. **/ static void lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) { unsigned long drvr_flag; spin_lock_irqsave(&phba->hbalock, drvr_flag); phba->hb_outstanding = 0; spin_unlock_irqrestore(&phba->hbalock, drvr_flag); /* Check and reset heart-beat timer is necessary */ mempool_free(pmboxq, phba->mbox_mem_pool); if (!(phba->pport->fc_flag & FC_OFFLINE_MODE) && !(phba->link_state == LPFC_HBA_ERROR) && !(phba->pport->load_flag & FC_UNLOADING)) mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL); return; } /** * lpfc_hb_timeout_handler: The HBA-timer timeout handler. * @phba: pointer to lpfc hba data structure. * * This is the actual HBA-timer timeout handler to be invoked by the worker * thread whenever the HBA timer fired and HBA-timeout event posted. This * handler performs any periodic operations needed for the device. If such * periodic event has already been attended to either in the interrupt handler * or by processing slow-ring or fast-ring events within the HBA-timer * timeout window (LPFC_HB_MBOX_INTERVAL), this handler just simply resets * the timer for the next timeout period. If lpfc heart-beat mailbox command * is configured and there is no heart-beat mailbox command outstanding, a * heart-beat mailbox is issued and timer set properly. Otherwise, if there * has been a heart-beat mailbox command outstanding, the HBA shall be put * to offline. **/ void lpfc_hb_timeout_handler(struct lpfc_hba *phba) { LPFC_MBOXQ_t *pmboxq; struct lpfc_dmabuf *buf_ptr; int retval; struct lpfc_sli *psli = &phba->sli; LIST_HEAD(completions); if ((phba->link_state == LPFC_HBA_ERROR) || (phba->pport->load_flag & FC_UNLOADING) || (phba->pport->fc_flag & FC_OFFLINE_MODE)) return; spin_lock_irq(&phba->pport->work_port_lock); if (time_after(phba->last_completion_time + LPFC_HB_MBOX_INTERVAL * HZ, jiffies)) { spin_unlock_irq(&phba->pport->work_port_lock); if (!phba->hb_outstanding) mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL); else mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_TIMEOUT); return; } spin_unlock_irq(&phba->pport->work_port_lock); if (phba->elsbuf_cnt && (phba->elsbuf_cnt == phba->elsbuf_prev_cnt)) { spin_lock_irq(&phba->hbalock); list_splice_init(&phba->elsbuf, &completions); phba->elsbuf_cnt = 0; phba->elsbuf_prev_cnt = 0; spin_unlock_irq(&phba->hbalock); while (!list_empty(&completions)) { list_remove_head(&completions, buf_ptr, struct lpfc_dmabuf, list); lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); kfree(buf_ptr); } } phba->elsbuf_prev_cnt = phba->elsbuf_cnt; /* If there is no heart beat outstanding, issue a heartbeat command */ if (phba->cfg_enable_hba_heartbeat) { if (!phba->hb_outstanding) { pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL); if (!pmboxq) { mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL); return; } lpfc_heart_beat(phba, pmboxq); pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl; pmboxq->vport = phba->pport; retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); if (retval != MBX_BUSY && retval != MBX_SUCCESS) { mempool_free(pmboxq, phba->mbox_mem_pool); mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_INTERVAL); return; } mod_timer(&phba->hb_tmofunc, jiffies + HZ * LPFC_HB_MBOX_TIMEOUT); phba->hb_outstanding = 1; return; } else { /* * If heart beat timeout called with hb_outstanding set * we need to take the HBA offline. */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0459 Adapter heartbeat failure, " "taking this port offline.\n"); spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_SLI2_ACTIVE; spin_unlock_irq(&phba->hbalock); lpfc_offline_prep(phba); lpfc_offline(phba); lpfc_unblock_mgmt_io(phba); phba->link_state = LPFC_HBA_ERROR; lpfc_hba_down_post(phba); } } } /** * lpfc_offline_eratt: Bring lpfc offline on hardware error attention. * @phba: pointer to lpfc hba data structure. * * This routine is called to bring the HBA offline when HBA hardware error * other than Port Error 6 has been detected. **/ static void lpfc_offline_eratt(struct lpfc_hba *phba) { struct lpfc_sli *psli = &phba->sli; spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_SLI2_ACTIVE; spin_unlock_irq(&phba->hbalock); lpfc_offline_prep(phba); lpfc_offline(phba); lpfc_reset_barrier(phba); lpfc_sli_brdreset(phba); lpfc_hba_down_post(phba); lpfc_sli_brdready(phba, HS_MBRDY); lpfc_unblock_mgmt_io(phba); phba->link_state = LPFC_HBA_ERROR; return; } /** * lpfc_handle_eratt: The HBA hardware error handler. * @phba: pointer to lpfc hba data structure. * * This routine is invoked to handle the following HBA hardware error * conditions: * 1 - HBA error attention interrupt * 2 - DMA ring index out of range * 3 - Mailbox command came back as unknown **/ void lpfc_handle_eratt(struct lpfc_hba *phba) { struct lpfc_vport *vport = phba->pport; struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; uint32_t event_data; unsigned long temperature; struct temp_event temp_event_data; struct Scsi_Host *shost; struct lpfc_board_event_header board_event; /* If the pci channel is offline, ignore possible errors, * since we cannot communicate with the pci card anyway. */ if (pci_channel_offline(phba->pcidev)) return; /* If resets are disabled then leave the HBA alone and return */ if (!phba->cfg_enable_hba_reset) return; /* Send an internal error event to mgmt application */ board_event.event_type = FC_REG_BOARD_EVENT; board_event.subcategory = LPFC_EVENT_PORTINTERR; shost = lpfc_shost_from_vport(phba->pport); fc_host_post_vendor_event(shost, fc_get_event_number(), sizeof(board_event), (char *) &board_event, LPFC_NL_VENDOR_ID); if (phba->work_hs & HS_FFER6) { /* Re-establishing Link */ lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, "1301 Re-establishing Link " "Data: x%x x%x x%x\n", phba->work_hs, phba->work_status[0], phba->work_status[1]); spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_SLI2_ACTIVE; spin_unlock_irq(&phba->hbalock); /* * Firmware stops when it triggled erratt with HS_FFER6. * That could cause the I/Os dropped by the firmware. * Error iocb (I/O) on txcmplq and let the SCSI layer * retry it after re-establishing link. */ pring = &psli->ring[psli->fcp_ring]; lpfc_sli_abort_iocb_ring(phba, pring); /* * There was a firmware error. Take the hba offline and then * attempt to restart it. */ lpfc_offline_prep(phba); lpfc_offline(phba); lpfc_sli_brdrestart(phba); if (lpfc_online(phba) == 0) { /* Initialize the HBA */ lpfc_unblock_mgmt_io(phba); return; } lpfc_unblock_mgmt_io(phba); } else if (phba->work_hs & HS_CRIT_TEMP) { temperature = readl(phba->MBslimaddr + TEMPERATURE_OFFSET); temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT; temp_event_data.event_code = LPFC_CRIT_TEMP; temp_event_data.data = (uint32_t)temperature; lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0406 Adapter maximum temperature exceeded " "(%ld), taking this port offline " "Data: x%x x%x x%x\n", temperature, phba->work_hs, phba->work_status[0], phba->work_status[1]); shost = lpfc_shost_from_vport(phba->pport); fc_host_post_vendor_event(shost, fc_get_event_number(), sizeof(temp_event_data), (char *) &temp_event_data, SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); spin_lock_irq(&phba->hbalock); phba->over_temp_state = HBA_OVER_TEMP; spin_unlock_irq(&phba->hbalock); lpfc_offline_eratt(phba); } else { /* The if clause above forces this code path when the status * failure is a value other than FFER6. Do not call the offline * twice. This is the adapter hardware error path. */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0457 Adapter Hardware Error " "Data: x%x x%x x%x\n", phba->work_hs, phba->work_status[0], phba->work_status[1]); event_data = FC_REG_DUMP_EVENT; shost = lpfc_shost_from_vport(vport); fc_host_post_vendor_event(shost, fc_get_event_number(), sizeof(event_data), (char *) &event_data, SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); lpfc_offline_eratt(phba); } return; } /** * lpfc_handle_latt: The HBA link event handler. * @phba: pointer to lpfc hba data structure. * * This routine is invoked from the worker thread to handle a HBA host * attention link event. **/ void lpfc_handle_latt(struct lpfc_hba *phba) { struct lpfc_vport *vport = phba->pport; struct lpfc_sli *psli = &phba->sli; LPFC_MBOXQ_t *pmb; volatile uint32_t control; struct lpfc_dmabuf *mp; int rc = 0; pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmb) { rc = 1; goto lpfc_handle_latt_err_exit; } mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); if (!mp) { rc = 2; goto lpfc_handle_latt_free_pmb; } mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); if (!mp->virt) { rc = 3; goto lpfc_handle_latt_free_mp; } /* Cleanup any outstanding ELS commands */ lpfc_els_flush_all_cmd(phba); psli->slistat.link_event++; lpfc_read_la(phba, pmb, mp); pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la; pmb->vport = vport; /* Block ELS IOCBs until we have processed this mbox command */ phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT; rc = lpfc_sli_issue_mbox (phba, pmb, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) { rc = 4; goto lpfc_handle_latt_free_mbuf; } /* Clear Link Attention in HA REG */ spin_lock_irq(&phba->hbalock); writel(HA_LATT, phba->HAregaddr); readl(phba->HAregaddr); /* flush */ spin_unlock_irq(&phba->hbalock); return; lpfc_handle_latt_free_mbuf: phba->sli.ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT; lpfc_mbuf_free(phba, mp->virt, mp->phys); lpfc_handle_latt_free_mp: kfree(mp); lpfc_handle_latt_free_pmb: mempool_free(pmb, phba->mbox_mem_pool); lpfc_handle_latt_err_exit: /* Enable Link attention interrupts */ spin_lock_irq(&phba->hbalock); psli->sli_flag |= LPFC_PROCESS_LA; control = readl(phba->HCregaddr); control |= HC_LAINT_ENA; writel(control, phba->HCregaddr); readl(phba->HCregaddr); /* flush */ /* Clear Link Attention in HA REG */ writel(HA_LATT, phba->HAregaddr); readl(phba->HAregaddr); /* flush */ spin_unlock_irq(&phba->hbalock); lpfc_linkdown(phba); phba->link_state = LPFC_HBA_ERROR; lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, "0300 LATT: Cannot issue READ_LA: Data:%d\n", rc); return; } /** * lpfc_parse_vpd: Parse VPD (Vital Product Data). * @phba: pointer to lpfc hba data structure. * @vpd: pointer to the vital product data. * @len: length of the vital product data in bytes. * * This routine parses the Vital Product Data (VPD). The VPD is treated as * an array of characters. In this routine, the ModelName, ProgramType, and * ModelDesc, etc. fields of the phba data structure will be populated. * * Return codes * 0 - pointer to the VPD passed in is NULL * 1 - success **/ static int lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len) { uint8_t lenlo, lenhi; int Length; int i, j; int finished = 0; int index = 0; if (!vpd) return 0; /* Vital Product */ lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0455 Vital Product Data: x%x x%x x%x x%x\n", (uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2], (uint32_t) vpd[3]); while (!finished && (index < (len - 4))) { switch (vpd[index]) { case 0x82: case 0x91: index += 1; lenlo = vpd[index]; index += 1; lenhi = vpd[index]; index += 1; i = ((((unsigned short)lenhi) << 8) + lenlo); index += i; break; case 0x90: index += 1; lenlo = vpd[index]; index += 1; lenhi = vpd[index]; index += 1; Length = ((((unsigned short)lenhi) << 8) + lenlo); if (Length > len - index) Length = len - index; while (Length > 0) { /* Look for Serial Number */ if ((vpd[index] == 'S') && (vpd[index+1] == 'N')) { index += 2; i = vpd[index]; index += 1; j = 0; Length -= (3+i); while(i--) { phba->SerialNumber[j++] = vpd[index++]; if (j == 31) break; } phba->SerialNumber[j] = 0; continue; } else if ((vpd[index] == 'V') && (vpd[index+1] == '1')) { phba->vpd_flag |= VPD_MODEL_DESC; index += 2; i = vpd[index]; index += 1; j = 0; Length -= (3+i); while(i--) { phba->ModelDesc[j++] = vpd[index++]; if (j == 255) break; } phba->ModelDesc[j] = 0; continue; } else if ((vpd[index] == 'V') && (vpd[index+1] == '2')) { phba->vpd_flag |= VPD_MODEL_NAME; index += 2; i = vpd[index]; index += 1; j = 0; Length -= (3+i); while(i--) { phba->ModelName[j++] = vpd[index++]; if (j == 79) break; } phba->ModelName[j] = 0; continue; } else if ((vpd[index] == 'V') && (vpd[index+1] == '3')) { phba->vpd_flag |= VPD_PROGRAM_TYPE; index += 2; i = vpd[index]; index += 1; j = 0; Length -= (3+i); while(i--) { phba->ProgramType[j++] = vpd[index++]; if (j == 255) break; } phba->ProgramType[j] = 0; continue; } else if ((vpd[index] == 'V') && (vpd[index+1] == '4')) { phba->vpd_flag |= VPD_PORT; index += 2; i = vpd[index]; index += 1; j = 0; Length -= (3+i); while(i--) { phba->Port[j++] = vpd[index++]; if (j == 19) break; } phba->Port[j] = 0; continue; } else { index += 2; i = vpd[index]; index += 1; index += i; Length -= (3 + i); } } finished = 0; break; case 0x78: finished = 1; break; default: index ++; break; } } return(1); } /** * lpfc_get_hba_model_desc: Retrieve HBA device model name and description. * @phba: pointer to lpfc hba data structure. * @mdp: pointer to the data structure to hold the derived model name. * @descp: pointer to the data structure to hold the derived description. * * This routine retrieves HBA's description based on its registered PCI device * ID. The @descp passed into this function points to an array of 256 chars. It * shall be returned with the model name, maximum speed, and the host bus type. * The @mdp passed into this function points to an array of 80 chars. When the * function returns, the @mdp will be filled with the model name. **/ static void lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) { lpfc_vpd_t *vp; uint16_t dev_id = phba->pcidev->device; int max_speed; int GE = 0; struct { char * name; int max_speed; char * bus; } m = {"", 0, ""}; if (mdp && mdp[0] != '\0' && descp && descp[0] != '\0') return; if (phba->lmt & LMT_10Gb) max_speed = 10; else if (phba->lmt & LMT_8Gb) max_speed = 8; else if (phba->lmt & LMT_4Gb) max_speed = 4; else if (phba->lmt & LMT_2Gb) max_speed = 2; else max_speed = 1; vp = &phba->vpd; switch (dev_id) { case PCI_DEVICE_ID_FIREFLY: m = (typeof(m)){"LP6000", max_speed, "PCI"}; break; case PCI_DEVICE_ID_SUPERFLY: if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3) m = (typeof(m)){"LP7000", max_speed, "PCI"}; else m = (typeof(m)){"LP7000E", max_speed, "PCI"}; break; case PCI_DEVICE_ID_DRAGONFLY: m = (typeof(m)){"LP8000", max_speed, "PCI"}; break; case PCI_DEVICE_ID_CENTAUR: if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID) m = (typeof(m)){"LP9002", max_speed, "PCI"}; else m = (typeof(m)){"LP9000", max_speed, "PCI"}; break; case PCI_DEVICE_ID_RFLY: m = (typeof(m)){"LP952", max_speed, "PCI"}; break; case PCI_DEVICE_ID_PEGASUS: m = (typeof(m)){"LP9802", max_speed, "PCI-X"}; break; case PCI_DEVICE_ID_THOR: m = (typeof(m)){"LP10000", max_speed, "PCI-X"}; break; case PCI_DEVICE_ID_VIPER: m = (typeof(m)){"LPX1000", max_speed, "PCI-X"}; break; case PCI_DEVICE_ID_PFLY: m = (typeof(m)){"LP982", max_speed, "PCI-X"}; break; case PCI_DEVICE_ID_TFLY: m = (typeof(m)){"LP1050", max_speed, "PCI-X"}; break; case PCI_DEVICE_ID_HELIOS: m = (typeof(m)){"LP11000", max_speed, "PCI-X2"}; break; case PCI_DEVICE_ID_HELIOS_SCSP: m = (typeof(m)){"LP11000-SP", max_speed, "PCI-X2"}; break; case PCI_DEVICE_ID_HELIOS_DCSP: m = (typeof(m)){"LP11002-SP", max_speed, "PCI-X2"}; break; case PCI_DEVICE_ID_NEPTUNE: m = (typeof(m)){"LPe1000", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_NEPTUNE_SCSP: m = (typeof(m)){"LPe1000-SP", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_NEPTUNE_DCSP: m = (typeof(m)){"LPe1002-SP", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_BMID: m = (typeof(m)){"LP1150", max_speed, "PCI-X2"}; break; case PCI_DEVICE_ID_BSMB: m = (typeof(m)){"LP111", max_speed, "PCI-X2"}; break; case PCI_DEVICE_ID_ZEPHYR: m = (typeof(m)){"LPe11000", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_ZEPHYR_SCSP: m = (typeof(m)){"LPe11000", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_ZEPHYR_DCSP: m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_ZMID: m = (typeof(m)){"LPe1150", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_ZSMB: m = (typeof(m)){"LPe111", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_LP101: m = (typeof(m)){"LP101", max_speed, "PCI-X"}; break; case PCI_DEVICE_ID_LP10000S: m = (typeof(m)){"LP10000-S", max_speed, "PCI"}; break; case PCI_DEVICE_ID_LP11000S: m = (typeof(m)){"LP11000-S", max_speed, "PCI-X2"}; break; case PCI_DEVICE_ID_LPE11000S: m = (typeof(m)){"LPe11000-S", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_SAT: m = (typeof(m)){"LPe12000", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_SAT_MID: m = (typeof(m)){"LPe1250", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_SAT_SMB: m = (typeof(m)){"LPe121", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_SAT_DCSP: m = (typeof(m)){"LPe12002-SP", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_SAT_SCSP: m = (typeof(m)){"LPe12000-SP", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_SAT_S: m = (typeof(m)){"LPe12000-S", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_HORNET: m = (typeof(m)){"LP21000", max_speed, "PCIe"}; GE = 1; break; case PCI_DEVICE_ID_PROTEUS_VF: m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"}; break; case PCI_DEVICE_ID_PROTEUS_PF: m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"}; break; case PCI_DEVICE_ID_PROTEUS_S: m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"}; break; default: m = (typeof(m)){ NULL }; break; } if (mdp && mdp[0] == '\0') snprintf(mdp, 79,"%s", m.name); if (descp && descp[0] == '\0') snprintf(descp, 255, "Emulex %s %d%s %s %s", m.name, m.max_speed, (GE) ? "GE" : "Gb", m.bus, (GE) ? "FCoE Adapter" : "Fibre Channel Adapter"); } /** * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring. * @phba: pointer to lpfc hba data structure. * @pring: pointer to a IOCB ring. * @cnt: the number of IOCBs to be posted to the IOCB ring. * * This routine posts a given number of IOCBs with the associated DMA buffer * descriptors specified by the cnt argument to the given IOCB ring. * * Return codes * The number of IOCBs NOT able to be posted to the IOCB ring. **/ int lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt) { IOCB_t *icmd; struct lpfc_iocbq *iocb; struct lpfc_dmabuf *mp1, *mp2; cnt += pring->missbufcnt; /* While there are buffers to post */ while (cnt > 0) { /* Allocate buffer for command iocb */ iocb = lpfc_sli_get_iocbq(phba); if (iocb == NULL) { pring->missbufcnt = cnt; return cnt; } icmd = &iocb->iocb; /* 2 buffers can be posted per command */ /* Allocate buffer to post */ mp1 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL); if (mp1) mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp1->phys); if (!mp1 || !mp1->virt) { kfree(mp1); lpfc_sli_release_iocbq(phba, iocb); pring->missbufcnt = cnt; return cnt; } INIT_LIST_HEAD(&mp1->list); /* Allocate buffer to post */ if (cnt > 1) { mp2 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL); if (mp2) mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp2->phys); if (!mp2 || !mp2->virt) { kfree(mp2); lpfc_mbuf_free(phba, mp1->virt, mp1->phys); kfree(mp1); lpfc_sli_release_iocbq(phba, iocb); pring->missbufcnt = cnt; return cnt; } INIT_LIST_HEAD(&mp2->list); } else { mp2 = NULL; } icmd->un.cont64[0].addrHigh = putPaddrHigh(mp1->phys); icmd->un.cont64[0].addrLow = putPaddrLow(mp1->phys); icmd->un.cont64[0].tus.f.bdeSize = FCELSSIZE; icmd->ulpBdeCount = 1; cnt--; if (mp2) { icmd->un.cont64[1].addrHigh = putPaddrHigh(mp2->phys); icmd->un.cont64[1].addrLow = putPaddrLow(mp2->phys); icmd->un.cont64[1].tus.f.bdeSize = FCELSSIZE; cnt--; icmd->ulpBdeCount = 2; } icmd->ulpCommand = CMD_QUE_RING_BUF64_CN; icmd->ulpLe = 1; if (lpfc_sli_issue_iocb(phba, pring, iocb, 0) == IOCB_ERROR) { lpfc_mbuf_free(phba, mp1->virt, mp1->phys); kfree(mp1); cnt++; if (mp2) { lpfc_mbuf_free(phba, mp2->virt, mp2->phys); kfree(mp2); cnt++; } lpfc_sli_release_iocbq(phba, iocb); pring->missbufcnt = cnt; return cnt; } lpfc_sli_ringpostbuf_put(phba, pring, mp1); if (mp2) lpfc_sli_ringpostbuf_put(phba, pring, mp2); } pring->missbufcnt = 0; return 0; } /** * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring. * @phba: pointer to lpfc hba data structure. * * This routine posts initial receive IOCB buffers to the ELS ring. The * current number of initial IOCB buffers specified by LPFC_BUF_RING0 is * set to 64 IOCBs. * * Return codes * 0 - success (currently always success) **/ static int lpfc_post_rcv_buf(struct lpfc_hba *phba) { struct lpfc_sli *psli = &phba->sli; /* Ring 0, ELS / CT buffers */ lpfc_post_buffer(phba, &psli->ring[LPFC_ELS_RING], LPFC_BUF_RING0); /* Ring 2 - FCP no buffers needed */ return 0; } #define S(N,V) (((V)<<(N))|((V)>>(32-(N)))) /** * lpfc_sha_init: Set up initial array of hash table entries. * @HashResultPointer: pointer to an array as hash table. * * This routine sets up the initial values to the array of hash table entries * for the LC HBAs. **/ static void lpfc_sha_init(uint32_t * HashResultPointer) { HashResultPointer[0] = 0x67452301; HashResultPointer[1] = 0xEFCDAB89; HashResultPointer[2] = 0x98BADCFE; HashResultPointer[3] = 0x10325476; HashResultPointer[4] = 0xC3D2E1F0; } /** * lpfc_sha_iterate: Iterate initial hash table with the working hash table. * @HashResultPointer: pointer to an initial/result hash table. * @HashWorkingPointer: pointer to an working hash table. * * This routine iterates an initial hash table pointed by @HashResultPointer * with the values from the working hash table pointeed by @HashWorkingPointer. * The results are putting back to the initial hash table, returned through * the @HashResultPointer as the result hash table. **/ static void lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer) { int t; uint32_t TEMP; uint32_t A, B, C, D, E; t = 16; do { HashWorkingPointer[t] = S(1, HashWorkingPointer[t - 3] ^ HashWorkingPointer[t - 8] ^ HashWorkingPointer[t - 14] ^ HashWorkingPointer[t - 16]); } while (++t <= 79); t = 0; A = HashResultPointer[0]; B = HashResultPointer[1]; C = HashResultPointer[2]; D = HashResultPointer[3]; E = HashResultPointer[4]; do { if (t < 20) { TEMP = ((B & C) | ((~B) & D)) + 0x5A827999; } else if (t < 40) { TEMP = (B ^ C ^ D) + 0x6ED9EBA1; } else if (t < 60) { TEMP = ((B & C) | (B & D) | (C & D)) + 0x8F1BBCDC; } else { TEMP = (B ^ C ^ D) + 0xCA62C1D6; } TEMP += S(5, A) + E + HashWorkingPointer[t]; E = D; D = C; C = S(30, B); B = A; A = TEMP; } while (++t <= 79); HashResultPointer[0] += A; HashResultPointer[1] += B; HashResultPointer[2] += C; HashResultPointer[3] += D; HashResultPointer[4] += E; } /** * lpfc_challenge_key: Create challenge key based on WWPN of the HBA. * @RandomChallenge: pointer to the entry of host challenge random number array. * @HashWorking: pointer to the entry of the working hash array. * * This routine calculates the working hash array referred by @HashWorking * from the challenge random numbers associated with the host, referred by * @RandomChallenge. The result is put into the entry of the working hash * array and returned by reference through @HashWorking. **/ static void lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking) { *HashWorking = (*RandomChallenge ^ *HashWorking); } /** * lpfc_hba_init: Perform special handling for LC HBA initialization. * @phba: pointer to lpfc hba data structure. * @hbainit: pointer to an array of unsigned 32-bit integers. * * This routine performs the special handling for LC HBA initialization. **/ void lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit) { int t; uint32_t *HashWorking; uint32_t *pwwnn = (uint32_t *) phba->wwnn; HashWorking = kcalloc(80, sizeof(uint32_t), GFP_KERNEL); if (!HashWorking) return; HashWorking[0] = HashWorking[78] = *pwwnn++; HashWorking[1] = HashWorking[79] = *pwwnn; for (t = 0; t < 7; t++) lpfc_challenge_key(phba->RandomData + t, HashWorking + t); lpfc_sha_init(hbainit); lpfc_sha_iterate(hbainit, HashWorking); kfree(HashWorking); } /** * lpfc_cleanup: Performs vport cleanups before deleting a vport. * @vport: pointer to a virtual N_Port data structure. * * This routine performs the necessary cleanups before deleting the @vport. * It invokes the discovery state machine to perform necessary state * transitions and to release the ndlps associated with the @vport. Note, * the physical port is treated as @vport 0. **/ void lpfc_cleanup(struct lpfc_vport *vport) { struct lpfc_hba *phba = vport->phba; struct lpfc_nodelist *ndlp, *next_ndlp; int i = 0; if (phba->link_state > LPFC_LINK_DOWN) lpfc_port_link_failure(vport); list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { if (!NLP_CHK_NODE_ACT(ndlp)) { ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_UNUSED_NODE); if (!ndlp) continue; spin_lock_irq(&phba->ndlp_lock); NLP_SET_FREE_REQ(ndlp); spin_unlock_irq(&phba->ndlp_lock); /* Trigger the release of the ndlp memory */ lpfc_nlp_put(ndlp); continue; } spin_lock_irq(&phba->ndlp_lock); if (NLP_CHK_FREE_REQ(ndlp)) { /* The ndlp should not be in memory free mode already */ spin_unlock_irq(&phba->ndlp_lock); continue; } else /* Indicate request for freeing ndlp memory */ NLP_SET_FREE_REQ(ndlp); spin_unlock_irq(&phba->ndlp_lock); if (vport->port_type != LPFC_PHYSICAL_PORT && ndlp->nlp_DID == Fabric_DID) { /* Just free up ndlp with Fabric_DID for vports */ lpfc_nlp_put(ndlp); continue; } if (ndlp->nlp_type & NLP_FABRIC) lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RECOVERY); lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM); } /* At this point, ALL ndlp's should be gone * because of the previous NLP_EVT_DEVICE_RM. * Lets wait for this to happen, if needed. */ while (!list_empty(&vport->fc_nodes)) { if (i++ > 3000) { lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, "0233 Nodelist not empty\n"); list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { lpfc_printf_vlog(ndlp->vport, KERN_ERR, LOG_NODE, "0282 did:x%x ndlp:x%p " "usgmap:x%x refcnt:%d\n", ndlp->nlp_DID, (void *)ndlp, ndlp->nlp_usg_map, atomic_read( &ndlp->kref.refcount)); } break; } /* Wait for any activity on ndlps to settle */ msleep(10); } return; } /** * lpfc_stop_vport_timers: Stop all the timers associated with a vport. * @vport: pointer to a virtual N_Port data structure. * * This routine stops all the timers associated with a @vport. This function * is invoked before disabling or deleting a @vport. Note that the physical * port is treated as @vport 0. **/ void lpfc_stop_vport_timers(struct lpfc_vport *vport) { del_timer_sync(&vport->els_tmofunc); del_timer_sync(&vport->fc_fdmitmo); lpfc_can_disctmo(vport); return; } /** * lpfc_stop_phba_timers: Stop all the timers associated with an HBA. * @phba: pointer to lpfc hba data structure. * * This routine stops all the timers associated with a HBA. This function is * invoked before either putting a HBA offline or unloading the driver. **/ static void lpfc_stop_phba_timers(struct lpfc_hba *phba) { del_timer_sync(&phba->fcp_poll_timer); lpfc_stop_vport_timers(phba->pport); del_timer_sync(&phba->sli.mbox_tmo); del_timer_sync(&phba->fabric_block_timer); phba->hb_outstanding = 0; del_timer_sync(&phba->hb_tmofunc); del_timer_sync(&phba->eratt_poll); return; } /** * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked. * @phba: pointer to lpfc hba data structure. * * This routine marks a HBA's management interface as blocked. Once the HBA's * management interface is marked as blocked, all the user space access to * the HBA, whether they are from sysfs interface or libdfc interface will * all be blocked. The HBA is set to block the management interface when the * driver prepares the HBA interface for online or offline. **/ static void lpfc_block_mgmt_io(struct lpfc_hba * phba) { unsigned long iflag; spin_lock_irqsave(&phba->hbalock, iflag); phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO; spin_unlock_irqrestore(&phba->hbalock, iflag); } /** * lpfc_online: Initialize and bring a HBA online. * @phba: pointer to lpfc hba data structure. * * This routine initializes the HBA and brings a HBA online. During this * process, the management interface is blocked to prevent user space access * to the HBA interfering with the driver initialization. * * Return codes * 0 - successful * 1 - failed **/ int lpfc_online(struct lpfc_hba *phba) { struct lpfc_vport *vport = phba->pport; struct lpfc_vport **vports; int i; if (!phba) return 0; if (!(vport->fc_flag & FC_OFFLINE_MODE)) return 0; lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0458 Bring Adapter online\n"); lpfc_block_mgmt_io(phba); if (!lpfc_sli_queue_setup(phba)) { lpfc_unblock_mgmt_io(phba); return 1; } if (lpfc_sli_hba_setup(phba)) { /* Initialize the HBA */ lpfc_unblock_mgmt_io(phba); return 1; } vports = lpfc_create_vport_work_array(phba); if (vports != NULL) for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { struct Scsi_Host *shost; shost = lpfc_shost_from_vport(vports[i]); spin_lock_irq(shost->host_lock); vports[i]->fc_flag &= ~FC_OFFLINE_MODE; if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI; spin_unlock_irq(shost->host_lock); } lpfc_destroy_vport_work_array(phba, vports); lpfc_unblock_mgmt_io(phba); return 0; } /** * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked. * @phba: pointer to lpfc hba data structure. * * This routine marks a HBA's management interface as not blocked. Once the * HBA's management interface is marked as not blocked, all the user space * access to the HBA, whether they are from sysfs interface or libdfc * interface will be allowed. The HBA is set to block the management interface * when the driver prepares the HBA interface for online or offline and then * set to unblock the management interface afterwards. **/ void lpfc_unblock_mgmt_io(struct lpfc_hba * phba) { unsigned long iflag; spin_lock_irqsave(&phba->hbalock, iflag); phba->sli.sli_flag &= ~LPFC_BLOCK_MGMT_IO; spin_unlock_irqrestore(&phba->hbalock, iflag); } /** * lpfc_offline_prep: Prepare a HBA to be brought offline. * @phba: pointer to lpfc hba data structure. * * This routine is invoked to prepare a HBA to be brought offline. It performs * unregistration login to all the nodes on all vports and flushes the mailbox * queue to make it ready to be brought offline. **/ void lpfc_offline_prep(struct lpfc_hba * phba) { struct lpfc_vport *vport = phba->pport; struct lpfc_nodelist *ndlp, *next_ndlp; struct lpfc_vport **vports; int i; if (vport->fc_flag & FC_OFFLINE_MODE) return; lpfc_block_mgmt_io(phba); lpfc_linkdown(phba); /* Issue an unreg_login to all nodes on all vports */ vports = lpfc_create_vport_work_array(phba); if (vports != NULL) { for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { struct Scsi_Host *shost; if (vports[i]->load_flag & FC_UNLOADING) continue; shost = lpfc_shost_from_vport(vports[i]); list_for_each_entry_safe(ndlp, next_ndlp, &vports[i]->fc_nodes, nlp_listp) { if (!NLP_CHK_NODE_ACT(ndlp)) continue; if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) continue; if (ndlp->nlp_type & NLP_FABRIC) { lpfc_disc_state_machine(vports[i], ndlp, NULL, NLP_EVT_DEVICE_RECOVERY); lpfc_disc_state_machine(vports[i], ndlp, NULL, NLP_EVT_DEVICE_RM); } spin_lock_irq(shost->host_lock); ndlp->nlp_flag &= ~NLP_NPR_ADISC; spin_unlock_irq(shost->host_lock); lpfc_unreg_rpi(vports[i], ndlp); } } } lpfc_destroy_vport_work_array(phba, vports); lpfc_sli_flush_mbox_queue(phba); } /** * lpfc_offline: Bring a HBA offline. * @phba: pointer to lpfc hba data structure. * * This routine actually brings a HBA offline. It stops all the timers * associated with the HBA, brings down the SLI layer, and eventually * marks the HBA as in offline state for the upper layer protocol. **/ void lpfc_offline(struct lpfc_hba *phba) { struct Scsi_Host *shost; struct lpfc_vport **vports; int i; if (phba->pport->fc_flag & FC_OFFLINE_MODE) return; /* stop all timers associated with this hba */ lpfc_stop_phba_timers(phba); vports = lpfc_create_vport_work_array(phba); if (vports != NULL) for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) lpfc_stop_vport_timers(vports[i]); lpfc_destroy_vport_work_array(phba, vports); lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0460 Bring Adapter offline\n"); /* Bring down the SLI Layer and cleanup. The HBA is offline now. */ lpfc_sli_hba_down(phba); spin_lock_irq(&phba->hbalock); phba->work_ha = 0; spin_unlock_irq(&phba->hbalock); vports = lpfc_create_vport_work_array(phba); if (vports != NULL) for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { shost = lpfc_shost_from_vport(vports[i]); spin_lock_irq(shost->host_lock); vports[i]->work_port_events = 0; vports[i]->fc_flag |= FC_OFFLINE_MODE; spin_unlock_irq(shost->host_lock); } lpfc_destroy_vport_work_array(phba, vports); } /** * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists. * @phba: pointer to lpfc hba data structure. * * This routine is to free all the SCSI buffers and IOCBs from the driver * list back to kernel. It is called from lpfc_pci_remove_one to free * the internal resources before the device is removed from the system. * * Return codes * 0 - successful (for now, it always returns 0) **/ static int lpfc_scsi_free(struct lpfc_hba *phba) { struct lpfc_scsi_buf *sb, *sb_next; struct lpfc_iocbq *io, *io_next; spin_lock_irq(&phba->hbalock); /* Release all the lpfc_scsi_bufs maintained by this host. */ list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) { list_del(&sb->list); pci_pool_free(phba->lpfc_scsi_dma_buf_pool, sb->data, sb->dma_handle); kfree(sb); phba->total_scsi_bufs--; } /* Release all the lpfc_iocbq entries maintained by this host. */ list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) { list_del(&io->list); kfree(io); phba->total_iocbq_bufs--; } spin_unlock_irq(&phba->hbalock); return 0; } /** * lpfc_create_port: Create an FC port. * @phba: pointer to lpfc hba data structure. * @instance: a unique integer ID to this FC port. * @dev: pointer to the device data structure. * * This routine creates a FC port for the upper layer protocol. The FC port * can be created on top of either a physical port or a virtual port provided * by the HBA. This routine also allocates a SCSI host data structure (shost) * and associates the FC port created before adding the shost into the SCSI * layer. * * Return codes * @vport - pointer to the virtual N_Port data structure. * NULL - port create failed. **/ struct lpfc_vport * lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) { struct lpfc_vport *vport; struct Scsi_Host *shost; int error = 0; if (dev != &phba->pcidev->dev) shost = scsi_host_alloc(&lpfc_vport_template, sizeof(struct lpfc_vport)); else shost = scsi_host_alloc(&lpfc_template, sizeof(struct lpfc_vport)); if (!shost) goto out; vport = (struct lpfc_vport *) shost->hostdata; vport->phba = phba; vport->load_flag |= FC_LOADING; vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; vport->fc_rscn_flush = 0; lpfc_get_vport_cfgparam(vport); shost->unique_id = instance; shost->max_id = LPFC_MAX_TARGET; shost->max_lun = vport->cfg_max_luns; shost->this_id = -1; shost->max_cmd_len = 16; /* * Set initial can_queue value since 0 is no longer supported and * scsi_add_host will fail. This will be adjusted later based on the * max xri value determined in hba setup. */ shost->can_queue = phba->cfg_hba_queue_depth - 10; if (dev != &phba->pcidev->dev) { shost->transportt = lpfc_vport_transport_template; vport->port_type = LPFC_NPIV_PORT; } else { shost->transportt = lpfc_transport_template; vport->port_type = LPFC_PHYSICAL_PORT; } /* Initialize all internally managed lists. */ INIT_LIST_HEAD(&vport->fc_nodes); spin_lock_init(&vport->work_port_lock); init_timer(&vport->fc_disctmo); vport->fc_disctmo.function = lpfc_disc_timeout; vport->fc_disctmo.data = (unsigned long)vport; init_timer(&vport->fc_fdmitmo); vport->fc_fdmitmo.function = lpfc_fdmi_tmo; vport->fc_fdmitmo.data = (unsigned long)vport; init_timer(&vport->els_tmofunc); vport->els_tmofunc.function = lpfc_els_timeout; vport->els_tmofunc.data = (unsigned long)vport; error = scsi_add_host(shost, dev); if (error) goto out_put_shost; spin_lock_irq(&phba->hbalock); list_add_tail(&vport->listentry, &phba->port_list); spin_unlock_irq(&phba->hbalock); return vport; out_put_shost: scsi_host_put(shost); out: return NULL; } /** * destroy_port: Destroy an FC port. * @vport: pointer to an lpfc virtual N_Port data structure. * * This routine destroys a FC port from the upper layer protocol. All the * resources associated with the port are released. **/ void destroy_port(struct lpfc_vport *vport) { struct Scsi_Host *shost = lpfc_shost_from_vport(vport); struct lpfc_hba *phba = vport->phba; lpfc_debugfs_terminate(vport); fc_remove_host(shost); scsi_remove_host(shost); spin_lock_irq(&phba->hbalock); list_del_init(&vport->listentry); spin_unlock_irq(&phba->hbalock); lpfc_cleanup(vport); return; } /** * lpfc_get_instance: Get a unique integer ID. * * This routine allocates a unique integer ID from lpfc_hba_index pool. It * uses the kernel idr facility to perform the task. * * Return codes: * instance - a unique integer ID allocated as the new instance. * -1 - lpfc get instance failed. **/ int lpfc_get_instance(void) { int instance = 0; /* Assign an unused number */ if (!idr_pre_get(&lpfc_hba_index, GFP_KERNEL)) return -1; if (idr_get_new(&lpfc_hba_index, NULL, &instance)) return -1; return instance; } /** * lpfc_scan_finished: method for SCSI layer to detect whether scan is done. * @shost: pointer to SCSI host data structure. * @time: elapsed time of the scan in jiffies. * * This routine is called by the SCSI layer with a SCSI host to determine * whether the scan host is finished. * * Note: there is no scan_start function as adapter initialization will have * asynchronously kicked off the link initialization. * * Return codes * 0 - SCSI host scan is not over yet. * 1 - SCSI host scan is over. **/ int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; int stat = 0; spin_lock_irq(shost->host_lock); if (vport->load_flag & FC_UNLOADING) { stat = 1; goto finished; } if (time >= 30 * HZ) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0461 Scanning longer than 30 " "seconds. Continuing initialization\n"); stat = 1; goto finished; } if (time >= 15 * HZ && phba->link_state <= LPFC_LINK_DOWN) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0465 Link down longer than 15 " "seconds. Continuing initialization\n"); stat = 1; goto finished; } if (vport->port_state != LPFC_VPORT_READY) goto finished; if (vport->num_disc_nodes || vport->fc_prli_sent) goto finished; if (vport->fc_map_cnt == 0 && time < 2 * HZ) goto finished; if ((phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) != 0) goto finished; stat = 1; finished: spin_unlock_irq(shost->host_lock); return stat; } /** * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port. * @shost: pointer to SCSI host data structure. * * This routine initializes a given SCSI host attributes on a FC port. The * SCSI host can be either on top of a physical port or a virtual port. **/ void lpfc_host_attrib_init(struct Scsi_Host *shost) { struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; /* * Set fixed host attributes. Must done after lpfc_sli_hba_setup(). */ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn); fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn); fc_host_supported_classes(shost) = FC_COS_CLASS3; memset(fc_host_supported_fc4s(shost), 0, sizeof(fc_host_supported_fc4s(shost))); fc_host_supported_fc4s(shost)[2] = 1; fc_host_supported_fc4s(shost)[7] = 1; lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost), sizeof fc_host_symbolic_name(shost)); fc_host_supported_speeds(shost) = 0; if (phba->lmt & LMT_10Gb) fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT; if (phba->lmt & LMT_8Gb) fc_host_supported_speeds(shost) |= FC_PORTSPEED_8GBIT; if (phba->lmt & LMT_4Gb) fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT; if (phba->lmt & LMT_2Gb) fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT; if (phba->lmt & LMT_1Gb) fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT; fc_host_maxframe_size(shost) = (((uint32_t) vport->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) | (uint32_t) vport->fc_sparam.cmn.bbRcvSizeLsb; /* This value is also unchanging */ memset(fc_host_active_fc4s(shost), 0, sizeof(fc_host_active_fc4s(shost))); fc_host_active_fc4s(shost)[2] = 1; fc_host_active_fc4s(shost)[7] = 1; fc_host_max_npiv_vports(shost) = phba->max_vpi; spin_lock_irq(shost->host_lock); vport->load_flag &= ~FC_LOADING; spin_unlock_irq(shost->host_lock); } /** * lpfc_enable_msix: Enable MSI-X interrupt mode. * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable the MSI-X interrupt vectors. The kernel * function pci_enable_msix() is called to enable the MSI-X vectors. Note that * pci_enable_msix(), once invoked, enables either all or nothing, depending * on the current availability of PCI vector resources. The device driver is * responsible for calling the individual request_irq() to register each MSI-X * vector with a interrupt handler, which is done in this function. Note that * later when device is unloading, the driver should always call free_irq() * on all MSI-X vectors it has done request_irq() on before calling * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device * will be left with MSI-X enabled and leaks its vectors. * * Return codes * 0 - sucessful * other values - error **/ static int lpfc_enable_msix(struct lpfc_hba *phba) { int rc, i; LPFC_MBOXQ_t *pmb; /* Set up MSI-X multi-message vectors */ for (i = 0; i < LPFC_MSIX_VECTORS; i++) phba->msix_entries[i].entry = i; /* Configure MSI-X capability structure */ rc = pci_enable_msix(phba->pcidev, phba->msix_entries, ARRAY_SIZE(phba->msix_entries)); if (rc) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0420 Enable MSI-X failed (%d), continuing " "with MSI\n", rc); goto msi_fail_out; } else for (i = 0; i < LPFC_MSIX_VECTORS; i++) lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0477 MSI-X entry[%d]: vector=x%x " "message=%d\n", i, phba->msix_entries[i].vector, phba->msix_entries[i].entry); /* * Assign MSI-X vectors to interrupt handlers */ /* vector-0 is associated to slow-path handler */ rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler, IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba); if (rc) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0421 MSI-X slow-path request_irq failed " "(%d), continuing with MSI\n", rc); goto msi_fail_out; } /* vector-1 is associated to fast-path handler */ rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler, IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba); if (rc) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0429 MSI-X fast-path request_irq failed " "(%d), continuing with MSI\n", rc); goto irq_fail_out; } /* * Configure HBA MSI-X attention conditions to messages */ pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmb) { rc = -ENOMEM; lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0474 Unable to allocate memory for issuing " "MBOX_CONFIG_MSI command\n"); goto mem_fail_out; } rc = lpfc_config_msi(phba, pmb); if (rc) goto mbx_fail_out; rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, "0351 Config MSI mailbox command failed, " "mbxCmd x%x, mbxStatus x%x\n", pmb->mb.mbxCommand, pmb->mb.mbxStatus); goto mbx_fail_out; } /* Free memory allocated for mailbox command */ mempool_free(pmb, phba->mbox_mem_pool); return rc; mbx_fail_out: /* Free memory allocated for mailbox command */ mempool_free(pmb, phba->mbox_mem_pool); mem_fail_out: /* free the irq already requested */ free_irq(phba->msix_entries[1].vector, phba); irq_fail_out: /* free the irq already requested */ free_irq(phba->msix_entries[0].vector, phba); msi_fail_out: /* Unconfigure MSI-X capability structure */ pci_disable_msix(phba->pcidev); return rc; } /** * lpfc_disable_msix: Disable MSI-X interrupt mode. * @phba: pointer to lpfc hba data structure. * * This routine is invoked to release the MSI-X vectors and then disable the * MSI-X interrupt mode. **/ static void lpfc_disable_msix(struct lpfc_hba *phba) { int i; /* Free up MSI-X multi-message vectors */ for (i = 0; i < LPFC_MSIX_VECTORS; i++) free_irq(phba->msix_entries[i].vector, phba); /* Disable MSI-X */ pci_disable_msix(phba->pcidev); } /** * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem. * @pdev: pointer to PCI device * @pid: pointer to PCI device identifier * * This routine is to be registered to the kernel's PCI subsystem. When an * Emulex HBA is presented in PCI bus, the kernel PCI subsystem looks at * PCI device-specific information of the device and driver to see if the * driver state that it can support this kind of device. If the match is * successful, the driver core invokes this routine. If this routine * determines it can claim the HBA, it does all the initialization that it * needs to do to handle the HBA properly. * * Return code * 0 - driver can claim the device * negative value - driver can not claim the device **/ static int __devinit lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) { struct lpfc_vport *vport = NULL; struct lpfc_hba *phba; struct lpfc_sli *psli; struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL; struct Scsi_Host *shost = NULL; void *ptr; unsigned long bar0map_len, bar2map_len; int error = -ENODEV, retval; int i, hbq_count; uint16_t iotag; int bars = pci_select_bars(pdev, IORESOURCE_MEM); struct lpfc_adapter_event_header adapter_event; if (pci_enable_device_mem(pdev)) goto out; if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME)) goto out_disable_device; phba = kzalloc(sizeof (struct lpfc_hba), GFP_KERNEL); if (!phba) goto out_release_regions; atomic_set(&phba->fast_event_count, 0); spin_lock_init(&phba->hbalock); /* Initialize ndlp management spinlock */ spin_lock_init(&phba->ndlp_lock); phba->pcidev = pdev; /* Assign an unused board number */ if ((phba->brd_no = lpfc_get_instance()) < 0) goto out_free_phba; INIT_LIST_HEAD(&phba->port_list); init_waitqueue_head(&phba->wait_4_mlo_m_q); /* * Get all the module params for configuring this host and then * establish the host. */ lpfc_get_cfgparam(phba); phba->max_vpi = LPFC_MAX_VPI; /* Initialize timers used by driver */ init_timer(&phba->hb_tmofunc); phba->hb_tmofunc.function = lpfc_hb_timeout; phba->hb_tmofunc.data = (unsigned long)phba; psli = &phba->sli; init_timer(&psli->mbox_tmo); psli->mbox_tmo.function = lpfc_mbox_timeout; psli->mbox_tmo.data = (unsigned long) phba; init_timer(&phba->fcp_poll_timer); phba->fcp_poll_timer.function = lpfc_poll_timeout; phba->fcp_poll_timer.data = (unsigned long) phba; init_timer(&phba->fabric_block_timer); phba->fabric_block_timer.function = lpfc_fabric_block_timeout; phba->fabric_block_timer.data = (unsigned long) phba; init_timer(&phba->eratt_poll); phba->eratt_poll.function = lpfc_poll_eratt; phba->eratt_poll.data = (unsigned long) phba; pci_set_master(pdev); pci_save_state(pdev); pci_try_set_mwi(pdev); if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0) if (pci_set_dma_mask(phba->pcidev, DMA_32BIT_MASK) != 0) goto out_idr_remove; /* * Get the bus address of Bar0 and Bar2 and the number of bytes * required by each mapping. */ phba->pci_bar0_map = pci_resource_start(phba->pcidev, 0); bar0map_len = pci_resource_len(phba->pcidev, 0); phba->pci_bar2_map = pci_resource_start(phba->pcidev, 2); bar2map_len = pci_resource_len(phba->pcidev, 2); /* Map HBA SLIM to a kernel virtual address. */ phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len); if (!phba->slim_memmap_p) { error = -ENODEV; dev_printk(KERN_ERR, &pdev->dev, "ioremap failed for SLIM memory.\n"); goto out_idr_remove; } /* Map HBA Control Registers to a kernel virtual address. */ phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len); if (!phba->ctrl_regs_memmap_p) { error = -ENODEV; dev_printk(KERN_ERR, &pdev->dev, "ioremap failed for HBA control registers.\n"); goto out_iounmap_slim; } /* Allocate memory for SLI-2 structures */ phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE, &phba->slim2p.phys, GFP_KERNEL); if (!phba->slim2p.virt) goto out_iounmap; memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE); phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx); phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb)); phba->IOCBs = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, IOCBs)); phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev, lpfc_sli_hbq_size(), &phba->hbqslimp.phys, GFP_KERNEL); if (!phba->hbqslimp.virt) goto out_free_slim; hbq_count = lpfc_sli_hbq_count(); ptr = phba->hbqslimp.virt; for (i = 0; i < hbq_count; ++i) { phba->hbqs[i].hbq_virt = ptr; INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list); ptr += (lpfc_hbq_defs[i]->entry_count * sizeof(struct lpfc_hbq_entry)); } phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc; phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free; memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size()); INIT_LIST_HEAD(&phba->hbqbuf_in_list); /* Initialize the SLI Layer to run with lpfc HBAs. */ lpfc_sli_setup(phba); lpfc_sli_queue_setup(phba); retval = lpfc_mem_alloc(phba); if (retval) { error = retval; goto out_free_hbqslimp; } /* Initialize and populate the iocb list per host. */ INIT_LIST_HEAD(&phba->lpfc_iocb_list); for (i = 0; i < LPFC_IOCB_LIST_CNT; i++) { iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL); if (iocbq_entry == NULL) { printk(KERN_ERR "%s: only allocated %d iocbs of " "expected %d count. Unloading driver.\n", __func__, i, LPFC_IOCB_LIST_CNT); error = -ENOMEM; goto out_free_iocbq; } iotag = lpfc_sli_next_iotag(phba, iocbq_entry); if (iotag == 0) { kfree (iocbq_entry); printk(KERN_ERR "%s: failed to allocate IOTAG. " "Unloading driver.\n", __func__); error = -ENOMEM; goto out_free_iocbq; } spin_lock_irq(&phba->hbalock); list_add(&iocbq_entry->list, &phba->lpfc_iocb_list); phba->total_iocbq_bufs++; spin_unlock_irq(&phba->hbalock); } /* Initialize HBA structure */ phba->fc_edtov = FF_DEF_EDTOV; phba->fc_ratov = FF_DEF_RATOV; phba->fc_altov = FF_DEF_ALTOV; phba->fc_arbtov = FF_DEF_ARBTOV; INIT_LIST_HEAD(&phba->work_list); phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT); phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4)); /* Initialize the wait queue head for the kernel thread */ init_waitqueue_head(&phba->work_waitq); /* Startup the kernel thread for this host adapter. */ phba->worker_thread = kthread_run(lpfc_do_work, phba, "lpfc_worker_%d", phba->brd_no); if (IS_ERR(phba->worker_thread)) { error = PTR_ERR(phba->worker_thread); goto out_free_iocbq; } /* Initialize the list of scsi buffers used by driver for scsi IO. */ spin_lock_init(&phba->scsi_buf_list_lock); INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list); /* Initialize list of fabric iocbs */ INIT_LIST_HEAD(&phba->fabric_iocb_list); /* Initialize list to save ELS buffers */ INIT_LIST_HEAD(&phba->elsbuf); vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev); if (!vport) goto out_kthread_stop; shost = lpfc_shost_from_vport(vport); phba->pport = vport; lpfc_debugfs_initialize(vport); pci_set_drvdata(pdev, shost); phba->intr_type = NONE; phba->MBslimaddr = phba->slim_memmap_p; phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET; phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET; phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET; phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET; /* Configure and enable interrupt */ if (phba->cfg_use_msi == 2) { /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */ error = lpfc_sli_config_port(phba, 3); if (error) lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0427 Firmware not capable of SLI 3 mode.\n"); else { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0426 Firmware capable of SLI 3 mode.\n"); /* Now, try to enable MSI-X interrupt mode */ error = lpfc_enable_msix(phba); if (!error) { phba->intr_type = MSIX; lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0430 enable MSI-X mode.\n"); } } } /* Fallback to MSI if MSI-X initialization failed */ if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) { retval = pci_enable_msi(phba->pcidev); if (!retval) { phba->intr_type = MSI; lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0473 enable MSI mode.\n"); } else lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0452 enable IRQ mode.\n"); } /* MSI-X is the only case the doesn't need to call request_irq */ if (phba->intr_type != MSIX) { retval = request_irq(phba->pcidev->irq, lpfc_intr_handler, IRQF_SHARED, LPFC_DRIVER_NAME, phba); if (retval) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0451 Enable " "interrupt handler failed\n"); error = retval; goto out_disable_msi; } else if (phba->intr_type != MSI) phba->intr_type = INTx; } if (lpfc_alloc_sysfs_attr(vport)) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "1476 Failed to allocate sysfs attr\n"); error = -ENOMEM; goto out_free_irq; } if (lpfc_sli_hba_setup(phba)) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "1477 Failed to set up hba\n"); error = -ENODEV; goto out_remove_device; } /* * hba setup may have changed the hba_queue_depth so we need to adjust * the value of can_queue. */ shost->can_queue = phba->cfg_hba_queue_depth - 10; lpfc_host_attrib_init(shost); if (phba->cfg_poll & DISABLE_FCP_RING_INT) { spin_lock_irq(shost->host_lock); lpfc_poll_start_timer(phba); spin_unlock_irq(shost->host_lock); } lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0428 Perform SCSI scan\n"); /* Send board arrival event to upper layer */ adapter_event.event_type = FC_REG_ADAPTER_EVENT; adapter_event.subcategory = LPFC_EVENT_ARRIVAL; fc_host_post_vendor_event(shost, fc_get_event_number(), sizeof(adapter_event), (char *) &adapter_event, LPFC_NL_VENDOR_ID); return 0; out_remove_device: lpfc_free_sysfs_attr(vport); spin_lock_irq(shost->host_lock); vport->load_flag |= FC_UNLOADING; spin_unlock_irq(shost->host_lock); out_free_irq: lpfc_stop_phba_timers(phba); phba->pport->work_port_events = 0; if (phba->intr_type == MSIX) lpfc_disable_msix(phba); else free_irq(phba->pcidev->irq, phba); out_disable_msi: if (phba->intr_type == MSI) pci_disable_msi(phba->pcidev); destroy_port(vport); out_kthread_stop: kthread_stop(phba->worker_thread); out_free_iocbq: list_for_each_entry_safe(iocbq_entry, iocbq_next, &phba->lpfc_iocb_list, list) { kfree(iocbq_entry); phba->total_iocbq_bufs--; } lpfc_mem_free(phba); out_free_hbqslimp: dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt, phba->hbqslimp.phys); out_free_slim: dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, phba->slim2p.virt, phba->slim2p.phys); out_iounmap: iounmap(phba->ctrl_regs_memmap_p); out_iounmap_slim: iounmap(phba->slim_memmap_p); out_idr_remove: idr_remove(&lpfc_hba_index, phba->brd_no); out_free_phba: kfree(phba); out_release_regions: pci_release_selected_regions(pdev, bars); out_disable_device: pci_disable_device(pdev); out: pci_set_drvdata(pdev, NULL); if (shost) scsi_host_put(shost); return error; } /** * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem. * @pdev: pointer to PCI device * * This routine is to be registered to the kernel's PCI subsystem. When an * Emulex HBA is removed from PCI bus, it performs all the necessary cleanup * for the HBA device to be removed from the PCI subsystem properly. **/ static void __devexit lpfc_pci_remove_one(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_vport **vports; struct lpfc_hba *phba = vport->phba; int i; int bars = pci_select_bars(pdev, IORESOURCE_MEM); spin_lock_irq(&phba->hbalock); vport->load_flag |= FC_UNLOADING; spin_unlock_irq(&phba->hbalock); lpfc_free_sysfs_attr(vport); kthread_stop(phba->worker_thread); /* Release all the vports against this physical port */ vports = lpfc_create_vport_work_array(phba); if (vports != NULL) for (i = 1; i <= phba->max_vpi && vports[i] != NULL; i++) fc_vport_terminate(vports[i]->fc_vport); lpfc_destroy_vport_work_array(phba, vports); /* Remove FC host and then SCSI host with the physical port */ fc_remove_host(shost); scsi_remove_host(shost); lpfc_cleanup(vport); /* * Bring down the SLI Layer. This step disable all interrupts, * clears the rings, discards all mailbox commands, and resets * the HBA. */ lpfc_sli_hba_down(phba); lpfc_sli_brdrestart(phba); lpfc_stop_phba_timers(phba); spin_lock_irq(&phba->hbalock); list_del_init(&vport->listentry); spin_unlock_irq(&phba->hbalock); lpfc_debugfs_terminate(vport); if (phba->intr_type == MSIX) lpfc_disable_msix(phba); else { free_irq(phba->pcidev->irq, phba); if (phba->intr_type == MSI) pci_disable_msi(phba->pcidev); } pci_set_drvdata(pdev, NULL); scsi_host_put(shost); /* * Call scsi_free before mem_free since scsi bufs are released to their * corresponding pools here. */ lpfc_scsi_free(phba); lpfc_mem_free(phba); dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(), phba->hbqslimp.virt, phba->hbqslimp.phys); /* Free resources associated with SLI2 interface */ dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, phba->slim2p.virt, phba->slim2p.phys); /* unmap adapter SLIM and Control Registers */ iounmap(phba->ctrl_regs_memmap_p); iounmap(phba->slim_memmap_p); idr_remove(&lpfc_hba_index, phba->brd_no); kfree(phba); pci_release_selected_regions(pdev, bars); pci_disable_device(pdev); } /** * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management. * @pdev: pointer to PCI device * @msg: power management message * * This routine is to be registered to the kernel's PCI subsystem to support * system Power Management (PM). When PM invokes this method, it quiesces the * device by stopping the driver's worker thread for the device, turning off * device's interrupt and DMA, and bring the device offline. Note that as the * driver implements the minimum PM requirements to a power-aware driver's PM * support for suspend/resume -- all the possible PM messages (SUSPEND, * HIBERNATE, FREEZE) to the suspend() method call will be treated as SUSPEND * and the driver will fully reinitialize its device during resume() method * call, the driver will set device to PCI_D3hot state in PCI config space * instead of setting it according to the @msg provided by the PM. * * Return code * 0 - driver suspended the device * Error otherwise **/ static int lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0473 PCI device Power Management suspend.\n"); /* Bring down the device */ lpfc_offline_prep(phba); lpfc_offline(phba); kthread_stop(phba->worker_thread); /* Disable interrupt from device */ lpfc_disable_intr(phba); /* Save device state to PCI config space */ pci_save_state(pdev); pci_set_power_state(pdev, PCI_D3hot); return 0; } /** * lpfc_pci_resume_one: lpfc PCI func to resume device for power management. * @pdev: pointer to PCI device * * This routine is to be registered to the kernel's PCI subsystem to support * system Power Management (PM). When PM invokes this method, it restores * the device's PCI config space state and fully reinitializes the device * and brings it online. Note that as the driver implements the minimum PM * requirements to a power-aware driver's PM for suspend/resume -- all * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend() * method call will be treated as SUSPEND and the driver will fully * reinitialize its device during resume() method call, the device will be * set to PCI_D0 directly in PCI config space before restoring the state. * * Return code * 0 - driver suspended the device * Error otherwise **/ static int lpfc_pci_resume_one(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; int error; lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0452 PCI device Power Management resume.\n"); /* Restore device state from PCI config space */ pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); if (pdev->is_busmaster) pci_set_master(pdev); /* Startup the kernel thread for this host adapter. */ phba->worker_thread = kthread_run(lpfc_do_work, phba, "lpfc_worker_%d", phba->brd_no); if (IS_ERR(phba->worker_thread)) { error = PTR_ERR(phba->worker_thread); lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0434 PM resume failed to start worker " "thread: error=x%x.\n", error); return error; } /* Enable interrupt from device */ error = lpfc_enable_intr(phba); if (error) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0430 PM resume Failed to enable interrupt: " "error=x%x.\n", error); return error; } /* Restart HBA and bring it online */ lpfc_sli_brdrestart(phba); lpfc_online(phba); return 0; } /** * lpfc_io_error_detected: Driver method for handling PCI I/O error detected. * @pdev: pointer to PCI device. * @state: the current PCI connection state. * * This routine is registered to the PCI subsystem for error handling. This * function is called by the PCI subsystem after a PCI bus error affecting * this device has been detected. When this function is invoked, it will * need to stop all the I/Os and interrupt(s) to the device. Once that is * done, it will return PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to * perform proper recovery as desired. * * Return codes * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery * PCI_ERS_RESULT_DISCONNECT - device could not be recovered **/ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; if (state == pci_channel_io_perm_failure) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0472 PCI channel I/O permanent failure\n"); /* Block all SCSI devices' I/Os on the host */ lpfc_scsi_dev_block(phba); /* Clean up all driver's outstanding SCSI I/Os */ lpfc_sli_flush_fcp_rings(phba); return PCI_ERS_RESULT_DISCONNECT; } pci_disable_device(pdev); /* * There may be I/Os dropped by the firmware. * Error iocb (I/O) on txcmplq and let the SCSI layer * retry it after re-establishing link. */ pring = &psli->ring[psli->fcp_ring]; lpfc_sli_abort_iocb_ring(phba, pring); if (phba->intr_type == MSIX) lpfc_disable_msix(phba); else { free_irq(phba->pcidev->irq, phba); if (phba->intr_type == MSI) pci_disable_msi(phba->pcidev); } /* Request a slot reset. */ return PCI_ERS_RESULT_NEED_RESET; } /** * lpfc_io_slot_reset: Restart a PCI device from scratch. * @pdev: pointer to PCI device. * * This routine is registered to the PCI subsystem for error handling. This is * called after PCI bus has been reset to restart the PCI card from scratch, * as if from a cold-boot. During the PCI subsystem error recovery, after the * driver returns PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform * proper error recovery and then call this routine before calling the .resume * method to recover the device. This function will initialize the HBA device, * enable the interrupt, but it will just put the HBA to offline state without * passing any I/O traffic. * * Return codes * PCI_ERS_RESULT_RECOVERED - the device has been recovered * PCI_ERS_RESULT_DISCONNECT - device could not be recovered */ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; struct lpfc_sli *psli = &phba->sli; int error, retval; dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n"); if (pci_enable_device_mem(pdev)) { printk(KERN_ERR "lpfc: Cannot re-enable " "PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; } pci_restore_state(pdev); if (pdev->is_busmaster) pci_set_master(pdev); spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_SLI2_ACTIVE; spin_unlock_irq(&phba->hbalock); /* Enable configured interrupt method */ phba->intr_type = NONE; if (phba->cfg_use_msi == 2) { /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */ error = lpfc_sli_config_port(phba, 3); if (error) lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0478 Firmware not capable of SLI 3 mode.\n"); else { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0479 Firmware capable of SLI 3 mode.\n"); /* Now, try to enable MSI-X interrupt mode */ error = lpfc_enable_msix(phba); if (!error) { phba->intr_type = MSIX; lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0480 enable MSI-X mode.\n"); } } } /* Fallback to MSI if MSI-X initialization failed */ if (phba->cfg_use_msi >= 1 && phba->intr_type == NONE) { retval = pci_enable_msi(phba->pcidev); if (!retval) { phba->intr_type = MSI; lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0481 enable MSI mode.\n"); } else lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0470 enable IRQ mode.\n"); } /* MSI-X is the only case the doesn't need to call request_irq */ if (phba->intr_type != MSIX) { retval = request_irq(phba->pcidev->irq, lpfc_intr_handler, IRQF_SHARED, LPFC_DRIVER_NAME, phba); if (retval) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0471 Enable interrupt handler " "failed\n"); } else if (phba->intr_type != MSI) phba->intr_type = INTx; } /* Take device offline; this will perform cleanup */ lpfc_offline(phba); lpfc_sli_brdrestart(phba); return PCI_ERS_RESULT_RECOVERED; } /** * lpfc_io_resume: Resume PCI I/O operation. * @pdev: pointer to PCI device * * This routine is registered to the PCI subsystem for error handling. It is * called when kernel error recovery tells the lpfc driver that it is ok to * resume normal PCI operation after PCI bus error recovery. After this call, * traffic can start to flow from this device again. */ static void lpfc_io_resume(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; lpfc_online(phba); } static struct pci_device_id lpfc_id_table[] = { {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FIREFLY, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_THOR, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PEGASUS, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_CENTAUR, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_DRAGONFLY, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SUPERFLY, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_RFLY, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PFLY, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_SCSP, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_DCSP, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_SCSP, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_DCSP, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BMID, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BSMB, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HORNET, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_SCSP, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_DCSP, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZMID, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZSMB, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_TFLY, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP101, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP10000S, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP11000S, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LPE11000S, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_MID, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_SMB, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_DCSP, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_SCSP, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SAT_S, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_VF, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_PF, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S, PCI_ANY_ID, PCI_ANY_ID, }, { 0 } }; MODULE_DEVICE_TABLE(pci, lpfc_id_table); static struct pci_error_handlers lpfc_err_handler = { .error_detected = lpfc_io_error_detected, .slot_reset = lpfc_io_slot_reset, .resume = lpfc_io_resume, }; static struct pci_driver lpfc_driver = { .name = LPFC_DRIVER_NAME, .id_table = lpfc_id_table, .probe = lpfc_pci_probe_one, .remove = __devexit_p(lpfc_pci_remove_one), .suspend = lpfc_pci_suspend_one, .resume = lpfc_pci_resume_one, .err_handler = &lpfc_err_handler, }; /** * lpfc_init: lpfc module initialization routine. * * This routine is to be invoked when the lpfc module is loaded into the * kernel. The special kernel macro module_init() is used to indicate the * role of this routine to the kernel as lpfc module entry point. * * Return codes * 0 - successful * -ENOMEM - FC attach transport failed * all others - failed */ static int __init lpfc_init(void) { int error = 0; printk(LPFC_MODULE_DESC "\n"); printk(LPFC_COPYRIGHT "\n"); if (lpfc_enable_npiv) { lpfc_transport_functions.vport_create = lpfc_vport_create; lpfc_transport_functions.vport_delete = lpfc_vport_delete; } lpfc_transport_template = fc_attach_transport(&lpfc_transport_functions); if (lpfc_transport_template == NULL) return -ENOMEM; if (lpfc_enable_npiv) { lpfc_vport_transport_template = fc_attach_transport(&lpfc_vport_transport_functions); if (lpfc_vport_transport_template == NULL) { fc_release_transport(lpfc_transport_template); return -ENOMEM; } } error = pci_register_driver(&lpfc_driver); if (error) { fc_release_transport(lpfc_transport_template); if (lpfc_enable_npiv) fc_release_transport(lpfc_vport_transport_template); } return error; } /** * lpfc_exit: lpfc module removal routine. * * This routine is invoked when the lpfc module is removed from the kernel. * The special kernel macro module_exit() is used to indicate the role of * this routine to the kernel as lpfc module exit point. */ static void __exit lpfc_exit(void) { pci_unregister_driver(&lpfc_driver); fc_release_transport(lpfc_transport_template); if (lpfc_enable_npiv) fc_release_transport(lpfc_vport_transport_template); } module_init(lpfc_init); module_exit(lpfc_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION(LPFC_MODULE_DESC); MODULE_AUTHOR("Emulex Corporation - tech.support@emulex.com"); MODULE_VERSION("0:" LPFC_DRIVER_VERSION);