/* * linux/drivers/s390/crypto/ap_bus.h * * Copyright (C) 2006 IBM Corporation * Author(s): Cornelia Huck * Martin Schwidefsky * Ralph Wuerthner * Felix Beck * * Adjunct processor bus header file. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _AP_BUS_H_ #define _AP_BUS_H_ #include #include #include #define AP_DEVICES 64 /* Number of AP devices. */ #define AP_DOMAINS 16 /* Number of AP domains. */ #define AP_MAX_RESET 90 /* Maximum number of resets. */ #define AP_RESET_TIMEOUT (HZ/2) /* Time in ticks for reset timeouts. */ #define AP_CONFIG_TIME 30 /* Time in seconds between AP bus rescans. */ #define AP_POLL_TIME 1 /* Time in ticks between receive polls. */ extern int ap_domain_index; /** * The ap_qid_t identifier of an ap queue. It contains a * 6 bit device index and a 4 bit queue index (domain). */ typedef unsigned int ap_qid_t; #define AP_MKQID(_device,_queue) (((_device) & 63) << 8 | ((_queue) & 15)) #define AP_QID_DEVICE(_qid) (((_qid) >> 8) & 63) #define AP_QID_QUEUE(_qid) ((_qid) & 15) /** * structy ap_queue_status - Holds the AP queue status. * @queue_empty: Shows if queue is empty * @replies_waiting: Waiting replies * @queue_full: Is 1 if the queue is full * @pad: A 4 bit pad * @int_enabled: Shows if interrupts are enabled for the AP * @response_conde: Holds the 8 bit response code * @pad2: A 16 bit pad * * The ap queue status word is returned by all three AP functions * (PQAP, NQAP and DQAP). There's a set of flags in the first * byte, followed by a 1 byte response code. */ struct ap_queue_status { unsigned int queue_empty : 1; unsigned int replies_waiting : 1; unsigned int queue_full : 1; unsigned int pad1 : 4; unsigned int int_enabled : 1; unsigned int response_code : 8; unsigned int pad2 : 16; }; #define AP_RESPONSE_NORMAL 0x00 #define AP_RESPONSE_Q_NOT_AVAIL 0x01 #define AP_RESPONSE_RESET_IN_PROGRESS 0x02 #define AP_RESPONSE_DECONFIGURED 0x03 #define AP_RESPONSE_CHECKSTOPPED 0x04 #define AP_RESPONSE_BUSY 0x05 #define AP_RESPONSE_INVALID_ADDRESS 0x06 #define AP_RESPONSE_OTHERWISE_CHANGED 0x07 #define AP_RESPONSE_Q_FULL 0x10 #define AP_RESPONSE_NO_PENDING_REPLY 0x10 #define AP_RESPONSE_INDEX_TOO_BIG 0x11 #define AP_RESPONSE_NO_FIRST_PART 0x13 #define AP_RESPONSE_MESSAGE_TOO_BIG 0x15 #define AP_RESPONSE_REQ_FAC_NOT_INST 0x16 /* * Known device types */ #define AP_DEVICE_TYPE_PCICC 3 #define AP_DEVICE_TYPE_PCICA 4 #define AP_DEVICE_TYPE_PCIXCC 5 #define AP_DEVICE_TYPE_CEX2A 6 #define AP_DEVICE_TYPE_CEX2C 7 #define AP_DEVICE_TYPE_CEX2A2 8 #define AP_DEVICE_TYPE_CEX2C2 9 /* * AP reset flag states */ #define AP_RESET_IGNORE 0 /* request timeout will be ignored */ #define AP_RESET_ARMED 1 /* request timeout timer is active */ #define AP_RESET_DO 2 /* AP reset required */ struct ap_device; struct ap_message; struct ap_driver { struct device_driver driver; struct ap_device_id *ids; int (*probe)(struct ap_device *); void (*remove)(struct ap_device *); /* receive is called from tasklet context */ void (*receive)(struct ap_device *, struct ap_message *, struct ap_message *); int request_timeout; /* request timeout in jiffies */ }; #define to_ap_drv(x) container_of((x), struct ap_driver, driver) int ap_driver_register(struct ap_driver *, struct module *, char *); void ap_driver_unregister(struct ap_driver *); struct ap_device { struct device device; struct ap_driver *drv; /* Pointer to AP device driver. */ spinlock_t lock; /* Per device lock. */ struct list_head list; /* private list of all AP devices. */ ap_qid_t qid; /* AP queue id. */ int queue_depth; /* AP queue depth.*/ int device_type; /* AP device type. */ int unregistered; /* marks AP device as unregistered */ struct timer_list timeout; /* Timer for request timeouts. */ int reset; /* Reset required after req. timeout. */ int queue_count; /* # messages currently on AP queue. */ struct list_head pendingq; /* List of message sent to AP queue. */ int pendingq_count; /* # requests on pendingq list. */ struct list_head requestq; /* List of message yet to be sent. */ int requestq_count; /* # requests on requestq list. */ int total_request_count; /* # requests ever for this AP device. */ struct ap_message *reply; /* Per device reply message. */ void *private; /* ap driver private pointer. */ }; #define to_ap_dev(x) container_of((x), struct ap_device, device) struct ap_message { struct list_head list; /* Request queueing. */ unsigned long long psmid; /* Message id. */ void *message; /* Pointer to message buffer. */ size_t length; /* Message length. */ void *private; /* ap driver private pointer. */ unsigned int special:1; /* Used for special commands. */ }; #define AP_DEVICE(dt) \ .dev_type=(dt), \ .match_flags=AP_DEVICE_ID_MATCH_DEVICE_TYPE, /** * ap_init_message() - Initialize ap_message. * Initialize a message before using. Otherwise this might result in * unexpected behaviour. */ static inline void ap_init_message(struct ap_message *ap_msg) { ap_msg->psmid = 0; ap_msg->length = 0; ap_msg->special = 0; } /* * Note: don't use ap_send/ap_recv after using ap_queue_message * for the first time. Otherwise the ap message queue will get * confused. */ int ap_send(ap_qid_t, unsigned long long, void *, size_t); int ap_recv(ap_qid_t, unsigned long long *, void *, size_t); void ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg); void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg); void ap_flush_queue(struct ap_device *ap_dev); int ap_module_init(void); void ap_module_exit(void); #endif /* _AP_BUS_H_ */