# SPDX-License-Identifier: GPL-2.0-only # # Broadcom pinctrl drivers # config PINCTRL_BCM281XX bool "Broadcom BCM281xx pinctrl driver" depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST) select PINMUX select PINCONF select GENERIC_PINCONF select REGMAP_MMIO default ARCH_BCM_MOBILE help Say Y here to support Broadcom BCM281xx pinctrl driver, which is used for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs. This driver requires the pinctrl framework. GPIO is provided by a separate GPIO driver. config PINCTRL_BCM2835 bool "Broadcom BCM2835 GPIO (with PINCONF) driver" depends on OF && (ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST) select PINMUX select PINCONF select GENERIC_PINCONF select GPIOLIB select GPIOLIB_IRQCHIP default ARCH_BCM2835 || ARCH_BRCMSTB help Say Y here to enable the Broadcom BCM2835 GPIO driver. config PINCTRL_BCM63XX bool depends on OF select PINMUX select PINCONF select GENERIC_PINCONF select GPIOLIB select GPIO_REGMAP config PINCTRL_BCM6318 bool "Broadcom BCM6318 GPIO driver" depends on (BMIPS_GENERIC || COMPILE_TEST) select PINCTRL_BCM63XX default BMIPS_GENERIC help Say Y here to enable the Broadcom BCM6318 GPIO driver. config PINCTRL_BCM6328 bool "Broadcom BCM6328 GPIO driver" depends on (BMIPS_GENERIC || COMPILE_TEST) select PINCTRL_BCM63XX default BMIPS_GENERIC help Say Y here to enable the Broadcom BCM6328 GPIO driver. config PINCTRL_BCM6358 bool "Broadcom BCM6358 GPIO driver" depends on (BMIPS_GENERIC || COMPILE_TEST) select PINCTRL_BCM63XX default BMIPS_GENERIC help Say Y here to enable the Broadcom BCM6358 GPIO driver. config PINCTRL_BCM6362 bool "Broadcom BCM6362 GPIO driver" depends on (BMIPS_GENERIC || COMPILE_TEST) select PINCTRL_BCM63XX default BMIPS_GENERIC help Say Y here to enable the Broadcom BCM6362 GPIO driver. config PINCTRL_BCM6368 bool "Broadcom BCM6368 GPIO driver" depends on (BMIPS_GENERIC || COMPILE_TEST) select PINCTRL_BCM63XX default BMIPS_GENERIC help Say Y here to enable the Broadcom BCM6368 GPIO driver. config PINCTRL_BCM63268 bool "Broadcom BCM63268 GPIO driver" depends on (BMIPS_GENERIC || COMPILE_TEST) select PINCTRL_BCM63XX default BMIPS_GENERIC help Say Y here to enable the Broadcom BCM63268 GPIO driver. config PINCTRL_IPROC_GPIO bool "Broadcom iProc GPIO (with PINCONF) driver" depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) select GPIOLIB_IRQCHIP select PINCONF select GENERIC_PINCONF default ARCH_BCM_IPROC help Say yes here to enable the Broadcom iProc GPIO driver. The Broadcom iProc based SoCs- Cygnus, NS2, NSP and Stingray, use same GPIO Controller IP hence this driver could be used for all. The Broadcom Cygnus SoC has 3 GPIO controllers including the ASIU GPIO controller (ASIU), the chipCommonG GPIO controller (CCM), and the always-ON GPIO controller (CRMU/AON). All 3 GPIO controllers are supported by this driver. The Broadcom NSP has two GPIO controllers including the ChipcommonA GPIO, the ChipcommonB GPIO. Later controller is supported by this driver. The Broadcom NS2 has two GPIO controller including the CRMU GPIO, the ChipcommonG GPIO. Both controllers are supported by this driver. The Broadcom Stingray GPIO controllers are supported by this driver. All above SoCs GPIO controllers support basic PINCONF functions such as bias pull up, pull down, and drive strength configurations, when these pins are muxed to GPIO. It provides the framework where pins from the individual GPIO can be individually muxed to GPIO function, through interaction with the SoCs IOMUX controller. This features could be used only on SoCs which support individual pin muxing. config PINCTRL_CYGNUS_MUX bool "Broadcom Cygnus IOMUX driver" depends on (ARCH_BCM_CYGNUS || COMPILE_TEST) depends on OF select PINMUX select GENERIC_PINCONF default ARCH_BCM_CYGNUS help Say yes here to enable the Broadcom Cygnus IOMUX driver. The Broadcom Cygnus IOMUX driver supports group based IOMUX configuration, with the exception that certain individual pins can be overridden to GPIO function config PINCTRL_NS bool "Broadcom Northstar pins driver" depends on OF && (ARCH_BCM_5301X || COMPILE_TEST) select PINMUX select GENERIC_PINCONF default ARCH_BCM_5301X help Say yes here to enable the Broadcom NS SoC pins driver. The Broadcom Northstar pins driver supports muxing multi-purpose pins that can be used for various functions (e.g. SPI, I2C, UART) as well as GPIOs. config PINCTRL_NSP_GPIO bool "Broadcom NSP GPIO (with PINCONF) driver" depends on OF_GPIO && (ARCH_BCM_NSP || COMPILE_TEST) select GPIOLIB_IRQCHIP select PINCONF select GENERIC_PINCONF default ARCH_BCM_NSP help Say yes here to enable the Broadcom NSP GPIO driver. The Broadcom Northstar Plus SoC ChipcommonA GPIO controller is supported by this driver. The ChipcommonA GPIO controller support basic PINCONF functions such as bias pull up, pull down, and drive strength configurations, when these pins are muxed to GPIO. config PINCTRL_NS2_MUX bool "Broadcom Northstar2 pinmux driver" depends on OF depends on ARCH_BCM_IPROC || COMPILE_TEST select PINMUX select GENERIC_PINCONF default ARM64 && ARCH_BCM_IPROC help Say yes here to enable the Broadcom NS2 MUX driver. The Broadcom Northstar2 IOMUX driver supports group based IOMUX configuration. config PINCTRL_NSP_MUX bool "Broadcom NSP IOMUX driver" depends on (ARCH_BCM_NSP || COMPILE_TEST) depends on OF select PINMUX select GENERIC_PINCONF default ARCH_BCM_NSP help Say yes here to enable the Broadcom NSP SOC IOMUX driver. The Broadcom Northstar Plus IOMUX driver supports pin based IOMUX configuration, with certain individual pins can be overridden to GPIO function.