# SPDX-License-Identifier: GPL-2.0-only # # Phy drivers for Qualcomm and Atheros platforms # config PHY_ATH79_USB tristate "Atheros AR71XX/9XXX USB PHY driver" depends on OF && (ATH79 || COMPILE_TEST) default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM select RESET_CONTROLLER select GENERIC_PHY help Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs. config PHY_QCOM_APQ8064_SATA tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" depends on ARCH_QCOM depends on HAS_IOMEM depends on OF select GENERIC_PHY config PHY_QCOM_EDP tristate "Qualcomm eDP PHY driver" depends on ARCH_QCOM || COMPILE_TEST depends on OF depends on COMMON_CLK select GENERIC_PHY help Enable this driver to support the Qualcomm eDP PHY found in various Qualcomm chipsets. config PHY_QCOM_IPQ4019_USB tristate "Qualcomm IPQ4019 USB PHY driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. config PHY_QCOM_IPQ806X_SATA tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" depends on ARCH_QCOM depends on HAS_IOMEM depends on OF select GENERIC_PHY config PHY_QCOM_PCIE2 tristate "Qualcomm PCIe Gen2 PHY Driver" depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help Enable this to support the Qualcomm PCIe PHY, used with the Synopsys based PCIe controller. menuconfig PHY_QCOM_QMP tristate "Qualcomm QMP PHY Drivers" depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) if PHY_QCOM_QMP config PHY_QCOM_QMP_COMBO tristate "Qualcomm QMP Combo PHY Driver" default PHY_QCOM_QMP select GENERIC_PHY select MFD_SYSCON help Enable this to support the QMP Combo PHY transceiver that is used with USB3 and DisplayPort controllers on Qualcomm chips. config PHY_QCOM_QMP_PCIE tristate "Qualcomm QMP PCIe PHY Driver" depends on PCI || COMPILE_TEST select GENERIC_PHY default PHY_QCOM_QMP help Enable this to support the QMP PCIe PHY transceiver that is used with PCIe controllers on Qualcomm chips. config PHY_QCOM_QMP_PCIE_8996 tristate "Qualcomm QMP PCIe 8996 PHY Driver" depends on PCI || COMPILE_TEST select GENERIC_PHY default PHY_QCOM_QMP help Enable this to support the QMP PCIe PHY transceiver that is used with PCIe controllers on Qualcomm msm8996 chips. config PHY_QCOM_QMP_UFS tristate "Qualcomm QMP UFS PHY Driver" select GENERIC_PHY default PHY_QCOM_QMP help Enable this to support the QMP UFS PHY transceiver that is used with UFS controllers on Qualcomm chips. config PHY_QCOM_QMP_USB tristate "Qualcomm QMP USB PHY Driver" select GENERIC_PHY default PHY_QCOM_QMP help Enable this to support the QMP USB PHY transceiver that is used with USB3 controllers on Qualcomm chips. endif # PHY_QCOM_QMP config PHY_QCOM_QUSB2 tristate "Qualcomm QUSB2 PHY Driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on NVMEM || !NVMEM select GENERIC_PHY help Enable this to support the HighSpeed QUSB2 PHY transceiver for USB controllers on Qualcomm chips. This driver supports the high-speed PHY which is usually paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. config PHY_QCOM_SNPS_EUSB2 tristate "Qualcomm SNPS eUSB2 PHY Driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm chipsets. The PHY is paired with a Synopsys DWC3 USB controller on Qualcomm SOCs. config PHY_QCOM_EUSB2_REPEATER tristate "Qualcomm SNPS eUSB2 Repeater Driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm PMICs. The repeater is paired with a Synopsys eUSB2 Phy on Qualcomm SOCs. config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in select GENERIC_PHY help Support for the USB high-speed ULPI compliant phy on Qualcomm chipsets. config PHY_QCOM_USB_SNPS_FEMTO_V2 tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module" depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help Enable support for the USB high-speed SNPS Femto phy on Qualcomm chipsets. This PHY has differences in the register map compared to the V1 variants. The PHY is paired with a Synopsys DWC3 USB controller on Qualcomm SOCs. config PHY_QCOM_USB_HSIC tristate "Qualcomm USB HSIC ULPI PHY module" depends on USB_ULPI_BUS select GENERIC_PHY help Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. config PHY_QCOM_USB_HS_28NM tristate "Qualcomm 28nm High-Speed PHY" depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in select GENERIC_PHY help Enable this to support the Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY driver. This driver supports the Hi-Speed PHY which is usually paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. config PHY_QCOM_USB_SS tristate "Qualcomm USB Super-Speed PHY driver" depends on OF && (ARCH_QCOM || COMPILE_TEST) depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in select GENERIC_PHY help Enable this to support the Super-Speed USB transceiver on various Qualcomm chipsets. config PHY_QCOM_IPQ806X_USB tristate "Qualcomm IPQ806x DWC3 USB PHY driver" depends on HAS_IOMEM depends on OF && (ARCH_QCOM || COMPILE_TEST) select GENERIC_PHY help This option enables support for the Synopsis PHYs present inside the Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports both HS and SS PHY controllers.