/* SPDX-License-Identifier: ISC */ /* * Copyright (c) 2005-2011 Atheros Communications Inc. * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. */ #ifndef _WMI_H_ #define _WMI_H_ #include #include /* * This file specifies the WMI interface for the Unified Software * Architecture. * * It includes definitions of all the commands and events. Commands are * messages from the host to the target. Events and Replies are messages * from the target to the host. * * Ownership of correctness in regards to WMI commands belongs to the host * driver and the target is not required to validate parameters for value, * proper range, or any other checking. * * Guidelines for extending this interface are below. * * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff * * 2. Use ONLY u32 type for defining member variables within WMI * command/event structures. Do not use u8, u16, bool or * enum types within these structures. * * 3. DO NOT define bit fields within structures. Implement bit fields * using masks if necessary. Do not use the programming language's bit * field definition. * * 4. Define macros for encode/decode of u8, u16 fields within * the u32 variables. Use these macros for set/get of these fields. * Try to use this to optimize the structure without bloating it with * u32 variables for every lower sized field. * * 5. Do not use PACK/UNPACK attributes for the structures as each member * variable is already 4-byte aligned by virtue of being a u32 * type. * * 6. Comment each parameter part of the WMI command/event structure by * using the 2 stars at the beginning of C comment instead of one star to * enable HTML document generation using Doxygen. * */ /* Control Path */ struct wmi_cmd_hdr { __le32 cmd_id; } __packed; #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF #define WMI_CMD_HDR_CMD_ID_LSB 0 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 #define HTC_PROTOCOL_VERSION 0x0002 #define WMI_PROTOCOL_VERSION 0x0002 /* * There is no signed version of __le32, so for a temporary solution come * up with our own version. The idea is from fs/ntfs/endian.h. * * Use a_ prefix so that it doesn't conflict if we get proper support to * linux/types.h. */ typedef __s32 __bitwise a_sle32; static inline a_sle32 a_cpu_to_sle32(s32 val) { return (__force a_sle32)cpu_to_le32(val); } static inline s32 a_sle32_to_cpu(a_sle32 val) { return le32_to_cpu((__force __le32)val); } enum wmi_service { WMI_SERVICE_BEACON_OFFLOAD = 0, WMI_SERVICE_SCAN_OFFLOAD, WMI_SERVICE_ROAM_OFFLOAD, WMI_SERVICE_BCN_MISS_OFFLOAD, WMI_SERVICE_STA_PWRSAVE, WMI_SERVICE_STA_ADVANCED_PWRSAVE, WMI_SERVICE_AP_UAPSD, WMI_SERVICE_AP_DFS, WMI_SERVICE_11AC, WMI_SERVICE_BLOCKACK, WMI_SERVICE_PHYERR, WMI_SERVICE_BCN_FILTER, WMI_SERVICE_RTT, WMI_SERVICE_RATECTRL, WMI_SERVICE_WOW, WMI_SERVICE_RATECTRL_CACHE, WMI_SERVICE_IRAM_TIDS, WMI_SERVICE_ARPNS_OFFLOAD, WMI_SERVICE_NLO, WMI_SERVICE_GTK_OFFLOAD, WMI_SERVICE_SCAN_SCH, WMI_SERVICE_CSA_OFFLOAD, WMI_SERVICE_CHATTER, WMI_SERVICE_COEX_FREQAVOID, WMI_SERVICE_PACKET_POWER_SAVE, WMI_SERVICE_FORCE_FW_HANG, WMI_SERVICE_GPIO, WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, WMI_SERVICE_STA_KEEP_ALIVE, WMI_SERVICE_TX_ENCAP, WMI_SERVICE_BURST, WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, WMI_SERVICE_ROAM_SCAN_OFFLOAD, WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, WMI_SERVICE_EARLY_RX, WMI_SERVICE_STA_SMPS, WMI_SERVICE_FWTEST, WMI_SERVICE_STA_WMMAC, WMI_SERVICE_TDLS, WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, WMI_SERVICE_ADAPTIVE_OCS, WMI_SERVICE_BA_SSN_SUPPORT, WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, WMI_SERVICE_WLAN_HB, WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, WMI_SERVICE_BATCH_SCAN, WMI_SERVICE_QPOWER, WMI_SERVICE_PLMREQ, WMI_SERVICE_THERMAL_MGMT, WMI_SERVICE_RMC, WMI_SERVICE_MHF_OFFLOAD, WMI_SERVICE_COEX_SAR, WMI_SERVICE_BCN_TXRATE_OVERRIDE, WMI_SERVICE_NAN, WMI_SERVICE_L1SS_STAT, WMI_SERVICE_ESTIMATE_LINKSPEED, WMI_SERVICE_OBSS_SCAN, WMI_SERVICE_TDLS_OFFCHAN, WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, WMI_SERVICE_IBSS_PWRSAVE, WMI_SERVICE_LPASS, WMI_SERVICE_EXTSCAN, WMI_SERVICE_D0WOW, WMI_SERVICE_HSOFFLOAD, WMI_SERVICE_ROAM_HO_OFFLOAD, WMI_SERVICE_RX_FULL_REORDER, WMI_SERVICE_DHCP_OFFLOAD, WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, WMI_SERVICE_MDNS_OFFLOAD, WMI_SERVICE_SAP_AUTH_OFFLOAD, WMI_SERVICE_ATF, WMI_SERVICE_COEX_GPIO, WMI_SERVICE_ENHANCED_PROXY_STA, WMI_SERVICE_TT, WMI_SERVICE_PEER_CACHING, WMI_SERVICE_AUX_SPECTRAL_INTF, WMI_SERVICE_AUX_CHAN_LOAD_INTF, WMI_SERVICE_BSS_CHANNEL_INFO_64, WMI_SERVICE_EXT_RES_CFG_SUPPORT, WMI_SERVICE_MESH_11S, WMI_SERVICE_MESH_NON_11S, WMI_SERVICE_PEER_STATS, WMI_SERVICE_RESTRT_CHNL_SUPPORT, WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, WMI_SERVICE_TX_MODE_PUSH_ONLY, WMI_SERVICE_TX_MODE_PUSH_PULL, WMI_SERVICE_TX_MODE_DYNAMIC, WMI_SERVICE_VDEV_RX_FILTER, WMI_SERVICE_BTCOEX, WMI_SERVICE_CHECK_CAL_VERSION, WMI_SERVICE_DBGLOG_WARN2, WMI_SERVICE_BTCOEX_DUTY_CYCLE, WMI_SERVICE_4_WIRE_COEX_SUPPORT, WMI_SERVICE_EXTENDED_NSS_SUPPORT, WMI_SERVICE_PROG_GPIO_BAND_SELECT, WMI_SERVICE_SMART_LOGGING_SUPPORT, WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, WMI_SERVICE_MGMT_TX_WMI, WMI_SERVICE_TDLS_WIDER_BANDWIDTH, WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, WMI_SERVICE_TPC_STATS_FINAL, WMI_SERVICE_RESET_CHIP, WMI_SERVICE_SPOOF_MAC_SUPPORT, WMI_SERVICE_TX_DATA_ACK_RSSI, WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, WMI_SERVICE_THERM_THROT, WMI_SERVICE_RTT_RESPONDER_ROLE, WMI_SERVICE_PER_PACKET_SW_ENCRYPT, WMI_SERVICE_REPORT_AIRTIME, WMI_SERVICE_SYNC_DELETE_CMDS, WMI_SERVICE_TX_PWR_PER_PEER, WMI_SERVICE_SUPPORT_EXTEND_ADDRESS, WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, /* Remember to add the new value to wmi_service_name()! */ /* keep last */ WMI_SERVICE_MAX, }; enum wmi_10x_service { WMI_10X_SERVICE_BEACON_OFFLOAD = 0, WMI_10X_SERVICE_SCAN_OFFLOAD, WMI_10X_SERVICE_ROAM_OFFLOAD, WMI_10X_SERVICE_BCN_MISS_OFFLOAD, WMI_10X_SERVICE_STA_PWRSAVE, WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, WMI_10X_SERVICE_AP_UAPSD, WMI_10X_SERVICE_AP_DFS, WMI_10X_SERVICE_11AC, WMI_10X_SERVICE_BLOCKACK, WMI_10X_SERVICE_PHYERR, WMI_10X_SERVICE_BCN_FILTER, WMI_10X_SERVICE_RTT, WMI_10X_SERVICE_RATECTRL, WMI_10X_SERVICE_WOW, WMI_10X_SERVICE_RATECTRL_CACHE, WMI_10X_SERVICE_IRAM_TIDS, WMI_10X_SERVICE_BURST, /* introduced in 10.2 */ WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, WMI_10X_SERVICE_FORCE_FW_HANG, WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, WMI_10X_SERVICE_ATF, WMI_10X_SERVICE_COEX_GPIO, WMI_10X_SERVICE_AUX_SPECTRAL_INTF, WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, WMI_10X_SERVICE_MESH, WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, WMI_10X_SERVICE_PEER_STATS, WMI_10X_SERVICE_RESET_CHIP, WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL, WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, }; enum wmi_main_service { WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, WMI_MAIN_SERVICE_SCAN_OFFLOAD, WMI_MAIN_SERVICE_ROAM_OFFLOAD, WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, WMI_MAIN_SERVICE_STA_PWRSAVE, WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, WMI_MAIN_SERVICE_AP_UAPSD, WMI_MAIN_SERVICE_AP_DFS, WMI_MAIN_SERVICE_11AC, WMI_MAIN_SERVICE_BLOCKACK, WMI_MAIN_SERVICE_PHYERR, WMI_MAIN_SERVICE_BCN_FILTER, WMI_MAIN_SERVICE_RTT, WMI_MAIN_SERVICE_RATECTRL, WMI_MAIN_SERVICE_WOW, WMI_MAIN_SERVICE_RATECTRL_CACHE, WMI_MAIN_SERVICE_IRAM_TIDS, WMI_MAIN_SERVICE_ARPNS_OFFLOAD, WMI_MAIN_SERVICE_NLO, WMI_MAIN_SERVICE_GTK_OFFLOAD, WMI_MAIN_SERVICE_SCAN_SCH, WMI_MAIN_SERVICE_CSA_OFFLOAD, WMI_MAIN_SERVICE_CHATTER, WMI_MAIN_SERVICE_COEX_FREQAVOID, WMI_MAIN_SERVICE_PACKET_POWER_SAVE, WMI_MAIN_SERVICE_FORCE_FW_HANG, WMI_MAIN_SERVICE_GPIO, WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, WMI_MAIN_SERVICE_STA_KEEP_ALIVE, WMI_MAIN_SERVICE_TX_ENCAP, }; enum wmi_10_4_service { WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, WMI_10_4_SERVICE_SCAN_OFFLOAD, WMI_10_4_SERVICE_ROAM_OFFLOAD, WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, WMI_10_4_SERVICE_STA_PWRSAVE, WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, WMI_10_4_SERVICE_AP_UAPSD, WMI_10_4_SERVICE_AP_DFS, WMI_10_4_SERVICE_11AC, WMI_10_4_SERVICE_BLOCKACK, WMI_10_4_SERVICE_PHYERR, WMI_10_4_SERVICE_BCN_FILTER, WMI_10_4_SERVICE_RTT, WMI_10_4_SERVICE_RATECTRL, WMI_10_4_SERVICE_WOW, WMI_10_4_SERVICE_RATECTRL_CACHE, WMI_10_4_SERVICE_IRAM_TIDS, WMI_10_4_SERVICE_BURST, WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, WMI_10_4_SERVICE_GTK_OFFLOAD, WMI_10_4_SERVICE_SCAN_SCH, WMI_10_4_SERVICE_CSA_OFFLOAD, WMI_10_4_SERVICE_CHATTER, WMI_10_4_SERVICE_COEX_FREQAVOID, WMI_10_4_SERVICE_PACKET_POWER_SAVE, WMI_10_4_SERVICE_FORCE_FW_HANG, WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, WMI_10_4_SERVICE_GPIO, WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, WMI_10_4_SERVICE_STA_KEEP_ALIVE, WMI_10_4_SERVICE_TX_ENCAP, WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, WMI_10_4_SERVICE_EARLY_RX, WMI_10_4_SERVICE_ENHANCED_PROXY_STA, WMI_10_4_SERVICE_TT, WMI_10_4_SERVICE_ATF, WMI_10_4_SERVICE_PEER_CACHING, WMI_10_4_SERVICE_COEX_GPIO, WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, WMI_10_4_SERVICE_MESH_NON_11S, WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, WMI_10_4_SERVICE_PEER_STATS, WMI_10_4_SERVICE_MESH_11S, WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, WMI_10_4_SERVICE_TX_MODE_DYNAMIC, WMI_10_4_SERVICE_VDEV_RX_FILTER, WMI_10_4_SERVICE_BTCOEX, WMI_10_4_SERVICE_CHECK_CAL_VERSION, WMI_10_4_SERVICE_DBGLOG_WARN2, WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, WMI_10_4_SERVICE_TDLS, WMI_10_4_SERVICE_TDLS_OFFCHAN, WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, WMI_10_4_SERVICE_TPC_STATS_FINAL, WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT, WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY, WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL, WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT, WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS, WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE, WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT, WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, WMI_10_4_SERVICE_REPORT_AIRTIME, WMI_10_4_SERVICE_TX_PWR_PER_PEER, WMI_10_4_SERVICE_FETCH_PEER_TX_PN, WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART, WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS, WMI_10_4_SERVICE_QINQ_SUPPORT, WMI_10_4_SERVICE_RESET_CHIP, }; static inline char *wmi_service_name(enum wmi_service service_id) { #define SVCSTR(x) case x: return #x switch (service_id) { SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); SVCSTR(WMI_SERVICE_STA_PWRSAVE); SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); SVCSTR(WMI_SERVICE_AP_UAPSD); SVCSTR(WMI_SERVICE_AP_DFS); SVCSTR(WMI_SERVICE_11AC); SVCSTR(WMI_SERVICE_BLOCKACK); SVCSTR(WMI_SERVICE_PHYERR); SVCSTR(WMI_SERVICE_BCN_FILTER); SVCSTR(WMI_SERVICE_RTT); SVCSTR(WMI_SERVICE_RATECTRL); SVCSTR(WMI_SERVICE_WOW); SVCSTR(WMI_SERVICE_RATECTRL_CACHE); SVCSTR(WMI_SERVICE_IRAM_TIDS); SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); SVCSTR(WMI_SERVICE_NLO); SVCSTR(WMI_SERVICE_GTK_OFFLOAD); SVCSTR(WMI_SERVICE_SCAN_SCH); SVCSTR(WMI_SERVICE_CSA_OFFLOAD); SVCSTR(WMI_SERVICE_CHATTER); SVCSTR(WMI_SERVICE_COEX_FREQAVOID); SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); SVCSTR(WMI_SERVICE_FORCE_FW_HANG); SVCSTR(WMI_SERVICE_GPIO); SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); SVCSTR(WMI_SERVICE_TX_ENCAP); SVCSTR(WMI_SERVICE_BURST); SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); SVCSTR(WMI_SERVICE_EARLY_RX); SVCSTR(WMI_SERVICE_STA_SMPS); SVCSTR(WMI_SERVICE_FWTEST); SVCSTR(WMI_SERVICE_STA_WMMAC); SVCSTR(WMI_SERVICE_TDLS); SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); SVCSTR(WMI_SERVICE_WLAN_HB); SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); SVCSTR(WMI_SERVICE_BATCH_SCAN); SVCSTR(WMI_SERVICE_QPOWER); SVCSTR(WMI_SERVICE_PLMREQ); SVCSTR(WMI_SERVICE_THERMAL_MGMT); SVCSTR(WMI_SERVICE_RMC); SVCSTR(WMI_SERVICE_MHF_OFFLOAD); SVCSTR(WMI_SERVICE_COEX_SAR); SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); SVCSTR(WMI_SERVICE_NAN); SVCSTR(WMI_SERVICE_L1SS_STAT); SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); SVCSTR(WMI_SERVICE_OBSS_SCAN); SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); SVCSTR(WMI_SERVICE_LPASS); SVCSTR(WMI_SERVICE_EXTSCAN); SVCSTR(WMI_SERVICE_D0WOW); SVCSTR(WMI_SERVICE_HSOFFLOAD); SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); SVCSTR(WMI_SERVICE_RX_FULL_REORDER); SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); SVCSTR(WMI_SERVICE_ATF); SVCSTR(WMI_SERVICE_COEX_GPIO); SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); SVCSTR(WMI_SERVICE_TT); SVCSTR(WMI_SERVICE_PEER_CACHING); SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); SVCSTR(WMI_SERVICE_MESH_11S); SVCSTR(WMI_SERVICE_MESH_NON_11S); SVCSTR(WMI_SERVICE_PEER_STATS); SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); SVCSTR(WMI_SERVICE_BTCOEX); SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); SVCSTR(WMI_SERVICE_DBGLOG_WARN2); SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); SVCSTR(WMI_SERVICE_MGMT_TX_WMI); SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS); SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); SVCSTR(WMI_SERVICE_RESET_CHIP); SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT); SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI); SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT); SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT); SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT); SVCSTR(WMI_SERVICE_THERM_THROT); SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE); SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT); SVCSTR(WMI_SERVICE_REPORT_AIRTIME); SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS); SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER); SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS); SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT); case WMI_SERVICE_MAX: return NULL; } #undef SVCSTR return NULL; } #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ ((svc_id) < (len) && \ __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ BIT((svc_id) % (sizeof(u32)))) /* This extension is required to accommodate new services, current limit * for wmi_services is 64 as target is using only 4-bits of each 32-bit * wmi_service word. Extending this to make use of remaining unused bits * for new services. */ #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ ((svc_id) >= (len) && \ __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) #define SVCMAP(x, y, len) \ do { \ if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ __set_bit(y, out); \ } while (0) static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, size_t len) { SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, WMI_SERVICE_BEACON_OFFLOAD, len); SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, WMI_SERVICE_SCAN_OFFLOAD, len); SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, WMI_SERVICE_ROAM_OFFLOAD, len); SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, WMI_SERVICE_BCN_MISS_OFFLOAD, len); SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, WMI_SERVICE_STA_PWRSAVE, len); SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); SVCMAP(WMI_10X_SERVICE_AP_UAPSD, WMI_SERVICE_AP_UAPSD, len); SVCMAP(WMI_10X_SERVICE_AP_DFS, WMI_SERVICE_AP_DFS, len); SVCMAP(WMI_10X_SERVICE_11AC, WMI_SERVICE_11AC, len); SVCMAP(WMI_10X_SERVICE_BLOCKACK, WMI_SERVICE_BLOCKACK, len); SVCMAP(WMI_10X_SERVICE_PHYERR, WMI_SERVICE_PHYERR, len); SVCMAP(WMI_10X_SERVICE_BCN_FILTER, WMI_SERVICE_BCN_FILTER, len); SVCMAP(WMI_10X_SERVICE_RTT, WMI_SERVICE_RTT, len); SVCMAP(WMI_10X_SERVICE_RATECTRL, WMI_SERVICE_RATECTRL, len); SVCMAP(WMI_10X_SERVICE_WOW, WMI_SERVICE_WOW, len); SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, WMI_SERVICE_RATECTRL_CACHE, len); SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, WMI_SERVICE_IRAM_TIDS, len); SVCMAP(WMI_10X_SERVICE_BURST, WMI_SERVICE_BURST, len); SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, WMI_SERVICE_FORCE_FW_HANG, len); SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); SVCMAP(WMI_10X_SERVICE_ATF, WMI_SERVICE_ATF, len); SVCMAP(WMI_10X_SERVICE_COEX_GPIO, WMI_SERVICE_COEX_GPIO, len); SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, WMI_SERVICE_AUX_SPECTRAL_INTF, len); SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, WMI_SERVICE_BSS_CHANNEL_INFO_64, len); SVCMAP(WMI_10X_SERVICE_MESH, WMI_SERVICE_MESH_11S, len); SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); SVCMAP(WMI_10X_SERVICE_PEER_STATS, WMI_SERVICE_PEER_STATS, len); SVCMAP(WMI_10X_SERVICE_RESET_CHIP, WMI_SERVICE_RESET_CHIP, len); SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len); SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); } static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, size_t len) { SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, WMI_SERVICE_BEACON_OFFLOAD, len); SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, WMI_SERVICE_SCAN_OFFLOAD, len); SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, WMI_SERVICE_ROAM_OFFLOAD, len); SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, WMI_SERVICE_BCN_MISS_OFFLOAD, len); SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, WMI_SERVICE_STA_PWRSAVE, len); SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, WMI_SERVICE_AP_UAPSD, len); SVCMAP(WMI_MAIN_SERVICE_AP_DFS, WMI_SERVICE_AP_DFS, len); SVCMAP(WMI_MAIN_SERVICE_11AC, WMI_SERVICE_11AC, len); SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, WMI_SERVICE_BLOCKACK, len); SVCMAP(WMI_MAIN_SERVICE_PHYERR, WMI_SERVICE_PHYERR, len); SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, WMI_SERVICE_BCN_FILTER, len); SVCMAP(WMI_MAIN_SERVICE_RTT, WMI_SERVICE_RTT, len); SVCMAP(WMI_MAIN_SERVICE_RATECTRL, WMI_SERVICE_RATECTRL, len); SVCMAP(WMI_MAIN_SERVICE_WOW, WMI_SERVICE_WOW, len); SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, WMI_SERVICE_RATECTRL_CACHE, len); SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, WMI_SERVICE_IRAM_TIDS, len); SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, WMI_SERVICE_ARPNS_OFFLOAD, len); SVCMAP(WMI_MAIN_SERVICE_NLO, WMI_SERVICE_NLO, len); SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, WMI_SERVICE_GTK_OFFLOAD, len); SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, WMI_SERVICE_SCAN_SCH, len); SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, WMI_SERVICE_CSA_OFFLOAD, len); SVCMAP(WMI_MAIN_SERVICE_CHATTER, WMI_SERVICE_CHATTER, len); SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, WMI_SERVICE_COEX_FREQAVOID, len); SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, WMI_SERVICE_PACKET_POWER_SAVE, len); SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, WMI_SERVICE_FORCE_FW_HANG, len); SVCMAP(WMI_MAIN_SERVICE_GPIO, WMI_SERVICE_GPIO, len); SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, WMI_SERVICE_STA_KEEP_ALIVE, len); SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, WMI_SERVICE_TX_ENCAP, len); } static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, size_t len) { SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, WMI_SERVICE_BEACON_OFFLOAD, len); SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, WMI_SERVICE_SCAN_OFFLOAD, len); SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, WMI_SERVICE_ROAM_OFFLOAD, len); SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, WMI_SERVICE_BCN_MISS_OFFLOAD, len); SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, WMI_SERVICE_STA_PWRSAVE, len); SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, WMI_SERVICE_AP_UAPSD, len); SVCMAP(WMI_10_4_SERVICE_AP_DFS, WMI_SERVICE_AP_DFS, len); SVCMAP(WMI_10_4_SERVICE_11AC, WMI_SERVICE_11AC, len); SVCMAP(WMI_10_4_SERVICE_BLOCKACK, WMI_SERVICE_BLOCKACK, len); SVCMAP(WMI_10_4_SERVICE_PHYERR, WMI_SERVICE_PHYERR, len); SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, WMI_SERVICE_BCN_FILTER, len); SVCMAP(WMI_10_4_SERVICE_RTT, WMI_SERVICE_RTT, len); SVCMAP(WMI_10_4_SERVICE_RATECTRL, WMI_SERVICE_RATECTRL, len); SVCMAP(WMI_10_4_SERVICE_WOW, WMI_SERVICE_WOW, len); SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, WMI_SERVICE_RATECTRL_CACHE, len); SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, WMI_SERVICE_IRAM_TIDS, len); SVCMAP(WMI_10_4_SERVICE_BURST, WMI_SERVICE_BURST, len); SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, WMI_SERVICE_GTK_OFFLOAD, len); SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, WMI_SERVICE_SCAN_SCH, len); SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, WMI_SERVICE_CSA_OFFLOAD, len); SVCMAP(WMI_10_4_SERVICE_CHATTER, WMI_SERVICE_CHATTER, len); SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, WMI_SERVICE_COEX_FREQAVOID, len); SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, WMI_SERVICE_PACKET_POWER_SAVE, len); SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, WMI_SERVICE_FORCE_FW_HANG, len); SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_GPIO, WMI_SERVICE_GPIO, len); SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, WMI_SERVICE_STA_KEEP_ALIVE, len); SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, WMI_SERVICE_TX_ENCAP, len); SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); SVCMAP(WMI_10_4_SERVICE_EARLY_RX, WMI_SERVICE_EARLY_RX, len); SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, WMI_SERVICE_ENHANCED_PROXY_STA, len); SVCMAP(WMI_10_4_SERVICE_TT, WMI_SERVICE_TT, len); SVCMAP(WMI_10_4_SERVICE_ATF, WMI_SERVICE_ATF, len); SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, WMI_SERVICE_PEER_CACHING, len); SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, WMI_SERVICE_COEX_GPIO, len); SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, WMI_SERVICE_AUX_SPECTRAL_INTF, len); SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, WMI_SERVICE_BSS_CHANNEL_INFO_64, len); SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, WMI_SERVICE_MESH_NON_11S, len); SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_PEER_STATS, WMI_SERVICE_PEER_STATS, len); SVCMAP(WMI_10_4_SERVICE_MESH_11S, WMI_SERVICE_MESH_11S, len); SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, WMI_SERVICE_TX_MODE_PUSH_ONLY, len); SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, WMI_SERVICE_TX_MODE_PUSH_PULL, len); SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, WMI_SERVICE_TX_MODE_DYNAMIC, len); SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, WMI_SERVICE_VDEV_RX_FILTER, len); SVCMAP(WMI_10_4_SERVICE_BTCOEX, WMI_SERVICE_BTCOEX, len); SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, WMI_SERVICE_CHECK_CAL_VERSION, len); SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, WMI_SERVICE_DBGLOG_WARN2, len); SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, WMI_SERVICE_SMART_LOGGING_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_TDLS, WMI_SERVICE_TDLS, len); SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, WMI_SERVICE_TDLS_OFFCHAN, len); SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, WMI_SERVICE_TPC_STATS_FINAL, len); SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, WMI_SERVICE_TX_DATA_ACK_RSSI, len); SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, WMI_SERVICE_RTT_RESPONDER_ROLE, len); SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME, WMI_SERVICE_REPORT_AIRTIME, len); SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER, WMI_SERVICE_TX_PWR_PER_PEER, len); SVCMAP(WMI_10_4_SERVICE_RESET_CHIP, WMI_SERVICE_RESET_CHIP, len); SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len); } #undef SVCMAP /* 2 word representation of MAC addr */ struct wmi_mac_addr { union { u8 addr[6]; struct { u32 word0; u32 word1; } __packed; } __packed; } __packed; struct wmi_cmd_map { u32 init_cmdid; u32 start_scan_cmdid; u32 stop_scan_cmdid; u32 scan_chan_list_cmdid; u32 scan_sch_prio_tbl_cmdid; u32 scan_prob_req_oui_cmdid; u32 pdev_set_regdomain_cmdid; u32 pdev_set_channel_cmdid; u32 pdev_set_param_cmdid; u32 pdev_pktlog_enable_cmdid; u32 pdev_pktlog_disable_cmdid; u32 pdev_set_wmm_params_cmdid; u32 pdev_set_ht_cap_ie_cmdid; u32 pdev_set_vht_cap_ie_cmdid; u32 pdev_set_dscp_tid_map_cmdid; u32 pdev_set_quiet_mode_cmdid; u32 pdev_green_ap_ps_enable_cmdid; u32 pdev_get_tpc_config_cmdid; u32 pdev_set_base_macaddr_cmdid; u32 vdev_create_cmdid; u32 vdev_delete_cmdid; u32 vdev_start_request_cmdid; u32 vdev_restart_request_cmdid; u32 vdev_up_cmdid; u32 vdev_stop_cmdid; u32 vdev_down_cmdid; u32 vdev_set_param_cmdid; u32 vdev_install_key_cmdid; u32 peer_create_cmdid; u32 peer_delete_cmdid; u32 peer_flush_tids_cmdid; u32 peer_set_param_cmdid; u32 peer_assoc_cmdid; u32 peer_add_wds_entry_cmdid; u32 peer_remove_wds_entry_cmdid; u32 peer_mcast_group_cmdid; u32 bcn_tx_cmdid; u32 pdev_send_bcn_cmdid; u32 bcn_tmpl_cmdid; u32 bcn_filter_rx_cmdid; u32 prb_req_filter_rx_cmdid; u32 mgmt_tx_cmdid; u32 mgmt_tx_send_cmdid; u32 prb_tmpl_cmdid; u32 addba_clear_resp_cmdid; u32 addba_send_cmdid; u32 addba_status_cmdid; u32 delba_send_cmdid; u32 addba_set_resp_cmdid; u32 send_singleamsdu_cmdid; u32 sta_powersave_mode_cmdid; u32 sta_powersave_param_cmdid; u32 sta_mimo_ps_mode_cmdid; u32 pdev_dfs_enable_cmdid; u32 pdev_dfs_disable_cmdid; u32 roam_scan_mode; u32 roam_scan_rssi_threshold; u32 roam_scan_period; u32 roam_scan_rssi_change_threshold; u32 roam_ap_profile; u32 ofl_scan_add_ap_profile; u32 ofl_scan_remove_ap_profile; u32 ofl_scan_period; u32 p2p_dev_set_device_info; u32 p2p_dev_set_discoverability; u32 p2p_go_set_beacon_ie; u32 p2p_go_set_probe_resp_ie; u32 p2p_set_vendor_ie_data_cmdid; u32 ap_ps_peer_param_cmdid; u32 ap_ps_peer_uapsd_coex_cmdid; u32 peer_rate_retry_sched_cmdid; u32 wlan_profile_trigger_cmdid; u32 wlan_profile_set_hist_intvl_cmdid; u32 wlan_profile_get_profile_data_cmdid; u32 wlan_profile_enable_profile_id_cmdid; u32 wlan_profile_list_profile_id_cmdid; u32 pdev_suspend_cmdid; u32 pdev_resume_cmdid; u32 add_bcn_filter_cmdid; u32 rmv_bcn_filter_cmdid; u32 wow_add_wake_pattern_cmdid; u32 wow_del_wake_pattern_cmdid; u32 wow_enable_disable_wake_event_cmdid; u32 wow_enable_cmdid; u32 wow_hostwakeup_from_sleep_cmdid; u32 rtt_measreq_cmdid; u32 rtt_tsf_cmdid; u32 vdev_spectral_scan_configure_cmdid; u32 vdev_spectral_scan_enable_cmdid; u32 request_stats_cmdid; u32 request_peer_stats_info_cmdid; u32 set_arp_ns_offload_cmdid; u32 network_list_offload_config_cmdid; u32 gtk_offload_cmdid; u32 csa_offload_enable_cmdid; u32 csa_offload_chanswitch_cmdid; u32 chatter_set_mode_cmdid; u32 peer_tid_addba_cmdid; u32 peer_tid_delba_cmdid; u32 sta_dtim_ps_method_cmdid; u32 sta_uapsd_auto_trig_cmdid; u32 sta_keepalive_cmd; u32 echo_cmdid; u32 pdev_utf_cmdid; u32 dbglog_cfg_cmdid; u32 pdev_qvit_cmdid; u32 pdev_ftm_intg_cmdid; u32 vdev_set_keepalive_cmdid; u32 vdev_get_keepalive_cmdid; u32 force_fw_hang_cmdid; u32 gpio_config_cmdid; u32 gpio_output_cmdid; u32 pdev_get_temperature_cmdid; u32 vdev_set_wmm_params_cmdid; u32 tdls_set_state_cmdid; u32 tdls_peer_update_cmdid; u32 adaptive_qcs_cmdid; u32 scan_update_request_cmdid; u32 vdev_standby_response_cmdid; u32 vdev_resume_response_cmdid; u32 wlan_peer_caching_add_peer_cmdid; u32 wlan_peer_caching_evict_peer_cmdid; u32 wlan_peer_caching_restore_peer_cmdid; u32 wlan_peer_caching_print_all_peers_info_cmdid; u32 peer_update_wds_entry_cmdid; u32 peer_add_proxy_sta_entry_cmdid; u32 rtt_keepalive_cmdid; u32 oem_req_cmdid; u32 nan_cmdid; u32 vdev_ratemask_cmdid; u32 qboost_cfg_cmdid; u32 pdev_smart_ant_enable_cmdid; u32 pdev_smart_ant_set_rx_antenna_cmdid; u32 peer_smart_ant_set_tx_antenna_cmdid; u32 peer_smart_ant_set_train_info_cmdid; u32 peer_smart_ant_set_node_config_ops_cmdid; u32 pdev_set_antenna_switch_table_cmdid; u32 pdev_set_ctl_table_cmdid; u32 pdev_set_mimogain_table_cmdid; u32 pdev_ratepwr_table_cmdid; u32 pdev_ratepwr_chainmsk_table_cmdid; u32 pdev_fips_cmdid; u32 tt_set_conf_cmdid; u32 fwtest_cmdid; u32 vdev_atf_request_cmdid; u32 peer_atf_request_cmdid; u32 pdev_get_ani_cck_config_cmdid; u32 pdev_get_ani_ofdm_config_cmdid; u32 pdev_reserve_ast_entry_cmdid; u32 pdev_get_nfcal_power_cmdid; u32 pdev_get_tpc_cmdid; u32 pdev_get_ast_info_cmdid; u32 vdev_set_dscp_tid_map_cmdid; u32 pdev_get_info_cmdid; u32 vdev_get_info_cmdid; u32 vdev_filter_neighbor_rx_packets_cmdid; u32 mu_cal_start_cmdid; u32 set_cca_params_cmdid; u32 pdev_bss_chan_info_request_cmdid; u32 pdev_enable_adaptive_cca_cmdid; u32 ext_resource_cfg_cmdid; u32 vdev_set_ie_cmdid; u32 set_lteu_config_cmdid; u32 atf_ssid_grouping_request_cmdid; u32 peer_atf_ext_request_cmdid; u32 set_periodic_channel_stats_cfg_cmdid; u32 peer_bwf_request_cmdid; u32 btcoex_cfg_cmdid; u32 peer_tx_mu_txmit_count_cmdid; u32 peer_tx_mu_txmit_rstcnt_cmdid; u32 peer_gid_userpos_list_cmdid; u32 pdev_check_cal_version_cmdid; u32 coex_version_cfg_cmid; u32 pdev_get_rx_filter_cmdid; u32 pdev_extended_nss_cfg_cmdid; u32 vdev_set_scan_nac_rssi_cmdid; u32 prog_gpio_band_select_cmdid; u32 config_smart_logging_cmdid; u32 debug_fatal_condition_cmdid; u32 get_tsf_timer_cmdid; u32 pdev_get_tpc_table_cmdid; u32 vdev_sifs_trigger_time_cmdid; u32 pdev_wds_entry_list_cmdid; u32 tdls_set_offchan_mode_cmdid; u32 radar_found_cmdid; u32 set_bb_timing_cmdid; u32 per_peer_per_tid_config_cmdid; }; /* * wmi command groups. */ enum wmi_cmd_group { /* 0 to 2 are reserved */ WMI_GRP_START = 0x3, WMI_GRP_SCAN = WMI_GRP_START, WMI_GRP_PDEV, WMI_GRP_VDEV, WMI_GRP_PEER, WMI_GRP_MGMT, WMI_GRP_BA_NEG, WMI_GRP_STA_PS, WMI_GRP_DFS, WMI_GRP_ROAM, WMI_GRP_OFL_SCAN, WMI_GRP_P2P, WMI_GRP_AP_PS, WMI_GRP_RATE_CTRL, WMI_GRP_PROFILE, WMI_GRP_SUSPEND, WMI_GRP_BCN_FILTER, WMI_GRP_WOW, WMI_GRP_RTT, WMI_GRP_SPECTRAL, WMI_GRP_STATS, WMI_GRP_ARP_NS_OFL, WMI_GRP_NLO_OFL, WMI_GRP_GTK_OFL, WMI_GRP_CSA_OFL, WMI_GRP_CHATTER, WMI_GRP_TID_ADDBA, WMI_GRP_MISC, WMI_GRP_GPIO, }; #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) #define WMI_CMD_UNSUPPORTED 0 /* Command IDs and command events for MAIN FW. */ enum wmi_cmd_id { WMI_INIT_CMDID = 0x1, /* Scan specific commands */ WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), WMI_STOP_SCAN_CMDID, WMI_SCAN_CHAN_LIST_CMDID, WMI_SCAN_SCH_PRIO_TBL_CMDID, /* PDEV (physical device) specific commands */ WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), WMI_PDEV_SET_CHANNEL_CMDID, WMI_PDEV_SET_PARAM_CMDID, WMI_PDEV_PKTLOG_ENABLE_CMDID, WMI_PDEV_PKTLOG_DISABLE_CMDID, WMI_PDEV_SET_WMM_PARAMS_CMDID, WMI_PDEV_SET_HT_CAP_IE_CMDID, WMI_PDEV_SET_VHT_CAP_IE_CMDID, WMI_PDEV_SET_DSCP_TID_MAP_CMDID, WMI_PDEV_SET_QUIET_MODE_CMDID, WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, WMI_PDEV_GET_TPC_CONFIG_CMDID, WMI_PDEV_SET_BASE_MACADDR_CMDID, /* VDEV (virtual device) specific commands */ WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), WMI_VDEV_DELETE_CMDID, WMI_VDEV_START_REQUEST_CMDID, WMI_VDEV_RESTART_REQUEST_CMDID, WMI_VDEV_UP_CMDID, WMI_VDEV_STOP_CMDID, WMI_VDEV_DOWN_CMDID, WMI_VDEV_SET_PARAM_CMDID, WMI_VDEV_INSTALL_KEY_CMDID, /* peer specific commands */ WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), WMI_PEER_DELETE_CMDID, WMI_PEER_FLUSH_TIDS_CMDID, WMI_PEER_SET_PARAM_CMDID, WMI_PEER_ASSOC_CMDID, WMI_PEER_ADD_WDS_ENTRY_CMDID, WMI_PEER_REMOVE_WDS_ENTRY_CMDID, WMI_PEER_MCAST_GROUP_CMDID, /* beacon/management specific commands */ WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), WMI_PDEV_SEND_BCN_CMDID, WMI_BCN_TMPL_CMDID, WMI_BCN_FILTER_RX_CMDID, WMI_PRB_REQ_FILTER_RX_CMDID, WMI_MGMT_TX_CMDID, WMI_PRB_TMPL_CMDID, /* commands to directly control BA negotiation directly from host. */ WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), WMI_ADDBA_SEND_CMDID, WMI_ADDBA_STATUS_CMDID, WMI_DELBA_SEND_CMDID, WMI_ADDBA_SET_RESP_CMDID, WMI_SEND_SINGLEAMSDU_CMDID, /* Station power save specific config */ WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), WMI_STA_POWERSAVE_PARAM_CMDID, WMI_STA_MIMO_PS_MODE_CMDID, /** DFS-specific commands */ WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), WMI_PDEV_DFS_DISABLE_CMDID, /* Roaming specific commands */ WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), WMI_ROAM_SCAN_RSSI_THRESHOLD, WMI_ROAM_SCAN_PERIOD, WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, WMI_ROAM_AP_PROFILE, /* offload scan specific commands */ WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), WMI_OFL_SCAN_REMOVE_AP_PROFILE, WMI_OFL_SCAN_PERIOD, /* P2P specific commands */ WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), WMI_P2P_DEV_SET_DISCOVERABILITY, WMI_P2P_GO_SET_BEACON_IE, WMI_P2P_GO_SET_PROBE_RESP_IE, WMI_P2P_SET_VENDOR_IE_DATA_CMDID, /* AP power save specific config */ WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), WMI_AP_PS_PEER_UAPSD_COEX_CMDID, /* Rate-control specific commands */ WMI_PEER_RATE_RETRY_SCHED_CMDID = WMI_CMD_GRP(WMI_GRP_RATE_CTRL), /* WLAN Profiling commands. */ WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, /* Suspend resume command Ids */ WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), WMI_PDEV_RESUME_CMDID, /* Beacon filter commands */ WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), WMI_RMV_BCN_FILTER_CMDID, /* WOW Specific WMI commands*/ WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), WMI_WOW_DEL_WAKE_PATTERN_CMDID, WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, WMI_WOW_ENABLE_CMDID, WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, /* RTT measurement related cmd */ WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), WMI_RTT_TSF_CMDID, /* spectral scan commands */ WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, /* F/W stats */ WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), /* ARP OFFLOAD REQUEST*/ WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), /* NS offload confid*/ WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), /* GTK offload Specific WMI commands*/ WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), /* CSA offload Specific WMI commands*/ WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, /* Chatter commands*/ WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), /* addba specific commands */ WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), WMI_PEER_TID_DELBA_CMDID, /* set station mimo powersave method */ WMI_STA_DTIM_PS_METHOD_CMDID, /* Configure the Station UAPSD AC Auto Trigger Parameters */ WMI_STA_UAPSD_AUTO_TRIG_CMDID, /* STA Keep alive parameter configuration, * Requires WMI_SERVICE_STA_KEEP_ALIVE */ WMI_STA_KEEPALIVE_CMD, /* misc command group */ WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), WMI_PDEV_UTF_CMDID, WMI_DBGLOG_CFG_CMDID, WMI_PDEV_QVIT_CMDID, WMI_PDEV_FTM_INTG_CMDID, WMI_VDEV_SET_KEEPALIVE_CMDID, WMI_VDEV_GET_KEEPALIVE_CMDID, WMI_FORCE_FW_HANG_CMDID, /* GPIO Configuration */ WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), WMI_GPIO_OUTPUT_CMDID, }; enum wmi_event_id { WMI_SERVICE_READY_EVENTID = 0x1, WMI_READY_EVENTID, WMI_SERVICE_AVAILABLE_EVENTID, /* Scan specific events */ WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), /* PDEV specific events */ WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), WMI_CHAN_INFO_EVENTID, WMI_PHYERR_EVENTID, /* VDEV specific events */ WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), WMI_VDEV_STOPPED_EVENTID, WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, /* peer specific events */ WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), /* beacon/mgmt specific events */ WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), WMI_HOST_SWBA_EVENTID, WMI_TBTTOFFSET_UPDATE_EVENTID, /* ADDBA Related WMI Events*/ WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), WMI_TX_ADDBA_COMPLETE_EVENTID, /* Roam event to trigger roaming on host */ WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), WMI_PROFILE_MATCH, /* WoW */ WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), /* RTT */ WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), WMI_TSF_MEASUREMENT_REPORT_EVENTID, WMI_RTT_ERROR_REPORT_EVENTID, /* GTK offload */ WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), WMI_GTK_REKEY_FAIL_EVENTID, /* CSA IE received event */ WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), /* Misc events */ WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), WMI_PDEV_UTF_EVENTID, WMI_DEBUG_MESG_EVENTID, WMI_UPDATE_STATS_EVENTID, WMI_DEBUG_PRINT_EVENTID, WMI_DCS_INTERFERENCE_EVENTID, WMI_PDEV_QVIT_EVENTID, WMI_WLAN_PROFILE_DATA_EVENTID, WMI_PDEV_FTM_INTG_EVENTID, WMI_WLAN_FREQ_AVOID_EVENTID, WMI_VDEV_GET_KEEPALIVE_EVENTID, /* GPIO Event */ WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), }; /* Command IDs and command events for 10.X firmware */ enum wmi_10x_cmd_id { WMI_10X_START_CMDID = 0x9000, WMI_10X_END_CMDID = 0x9FFF, /* initialize the wlan sub system */ WMI_10X_INIT_CMDID, /* Scan specific commands */ WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, WMI_10X_STOP_SCAN_CMDID, WMI_10X_SCAN_CHAN_LIST_CMDID, WMI_10X_ECHO_CMDID, /* PDEV(physical device) specific commands */ WMI_10X_PDEV_SET_REGDOMAIN_CMDID, WMI_10X_PDEV_SET_CHANNEL_CMDID, WMI_10X_PDEV_SET_PARAM_CMDID, WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, WMI_10X_PDEV_SET_QUIET_MODE_CMDID, WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, /* VDEV(virtual device) specific commands */ WMI_10X_VDEV_CREATE_CMDID, WMI_10X_VDEV_DELETE_CMDID, WMI_10X_VDEV_START_REQUEST_CMDID, WMI_10X_VDEV_RESTART_REQUEST_CMDID, WMI_10X_VDEV_UP_CMDID, WMI_10X_VDEV_STOP_CMDID, WMI_10X_VDEV_DOWN_CMDID, WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, WMI_10X_VDEV_RESUME_RESPONSE_CMDID, WMI_10X_VDEV_SET_PARAM_CMDID, WMI_10X_VDEV_INSTALL_KEY_CMDID, /* peer specific commands */ WMI_10X_PEER_CREATE_CMDID, WMI_10X_PEER_DELETE_CMDID, WMI_10X_PEER_FLUSH_TIDS_CMDID, WMI_10X_PEER_SET_PARAM_CMDID, WMI_10X_PEER_ASSOC_CMDID, WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, WMI_10X_PEER_MCAST_GROUP_CMDID, /* beacon/management specific commands */ WMI_10X_BCN_TX_CMDID, WMI_10X_BCN_PRB_TMPL_CMDID, WMI_10X_BCN_FILTER_RX_CMDID, WMI_10X_PRB_REQ_FILTER_RX_CMDID, WMI_10X_MGMT_TX_CMDID, /* commands to directly control ba negotiation directly from host. */ WMI_10X_ADDBA_CLEAR_RESP_CMDID, WMI_10X_ADDBA_SEND_CMDID, WMI_10X_ADDBA_STATUS_CMDID, WMI_10X_DELBA_SEND_CMDID, WMI_10X_ADDBA_SET_RESP_CMDID, WMI_10X_SEND_SINGLEAMSDU_CMDID, /* Station power save specific config */ WMI_10X_STA_POWERSAVE_MODE_CMDID, WMI_10X_STA_POWERSAVE_PARAM_CMDID, WMI_10X_STA_MIMO_PS_MODE_CMDID, /* set debug log config */ WMI_10X_DBGLOG_CFG_CMDID, /* DFS-specific commands */ WMI_10X_PDEV_DFS_ENABLE_CMDID, WMI_10X_PDEV_DFS_DISABLE_CMDID, /* QVIT specific command id */ WMI_10X_PDEV_QVIT_CMDID, /* Offload Scan and Roaming related commands */ WMI_10X_ROAM_SCAN_MODE, WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, WMI_10X_ROAM_SCAN_PERIOD, WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, WMI_10X_ROAM_AP_PROFILE, WMI_10X_OFL_SCAN_ADD_AP_PROFILE, WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, WMI_10X_OFL_SCAN_PERIOD, /* P2P specific commands */ WMI_10X_P2P_DEV_SET_DEVICE_INFO, WMI_10X_P2P_DEV_SET_DISCOVERABILITY, WMI_10X_P2P_GO_SET_BEACON_IE, WMI_10X_P2P_GO_SET_PROBE_RESP_IE, /* AP power save specific config */ WMI_10X_AP_PS_PEER_PARAM_CMDID, WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, /* Rate-control specific commands */ WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, /* WLAN Profiling commands. */ WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, /* Suspend resume command Ids */ WMI_10X_PDEV_SUSPEND_CMDID, WMI_10X_PDEV_RESUME_CMDID, /* Beacon filter commands */ WMI_10X_ADD_BCN_FILTER_CMDID, WMI_10X_RMV_BCN_FILTER_CMDID, /* WOW Specific WMI commands*/ WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, WMI_10X_WOW_ENABLE_CMDID, WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, /* RTT measurement related cmd */ WMI_10X_RTT_MEASREQ_CMDID, WMI_10X_RTT_TSF_CMDID, /* transmit beacon by value */ WMI_10X_PDEV_SEND_BCN_CMDID, /* F/W stats */ WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, WMI_10X_REQUEST_STATS_CMDID, /* GPIO Configuration */ WMI_10X_GPIO_CONFIG_CMDID, WMI_10X_GPIO_OUTPUT_CMDID, WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, }; enum wmi_10x_event_id { WMI_10X_SERVICE_READY_EVENTID = 0x8000, WMI_10X_READY_EVENTID, WMI_10X_START_EVENTID = 0x9000, WMI_10X_END_EVENTID = 0x9FFF, /* Scan specific events */ WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, WMI_10X_ECHO_EVENTID, WMI_10X_DEBUG_MESG_EVENTID, WMI_10X_UPDATE_STATS_EVENTID, /* Instantaneous RSSI event */ WMI_10X_INST_RSSI_STATS_EVENTID, /* VDEV specific events */ WMI_10X_VDEV_START_RESP_EVENTID, WMI_10X_VDEV_STANDBY_REQ_EVENTID, WMI_10X_VDEV_RESUME_REQ_EVENTID, WMI_10X_VDEV_STOPPED_EVENTID, /* peer specific events */ WMI_10X_PEER_STA_KICKOUT_EVENTID, /* beacon/mgmt specific events */ WMI_10X_HOST_SWBA_EVENTID, WMI_10X_TBTTOFFSET_UPDATE_EVENTID, WMI_10X_MGMT_RX_EVENTID, /* Channel stats event */ WMI_10X_CHAN_INFO_EVENTID, /* PHY Error specific WMI event */ WMI_10X_PHYERR_EVENTID, /* Roam event to trigger roaming on host */ WMI_10X_ROAM_EVENTID, /* matching AP found from list of profiles */ WMI_10X_PROFILE_MATCH, /* debug print message used for tracing FW code while debugging */ WMI_10X_DEBUG_PRINT_EVENTID, /* VI spoecific event */ WMI_10X_PDEV_QVIT_EVENTID, /* FW code profile data in response to profile request */ WMI_10X_WLAN_PROFILE_DATA_EVENTID, /*RTT related event ID*/ WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, WMI_10X_RTT_ERROR_REPORT_EVENTID, WMI_10X_WOW_WAKEUP_HOST_EVENTID, WMI_10X_DCS_INTERFERENCE_EVENTID, /* TPC config for the current operating channel */ WMI_10X_PDEV_TPC_CONFIG_EVENTID, WMI_10X_GPIO_INPUT_EVENTID, WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, }; enum wmi_10_2_cmd_id { WMI_10_2_START_CMDID = 0x9000, WMI_10_2_END_CMDID = 0x9FFF, WMI_10_2_INIT_CMDID, WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, WMI_10_2_STOP_SCAN_CMDID, WMI_10_2_SCAN_CHAN_LIST_CMDID, WMI_10_2_ECHO_CMDID, WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, WMI_10_2_PDEV_SET_CHANNEL_CMDID, WMI_10_2_PDEV_SET_PARAM_CMDID, WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, WMI_10_2_VDEV_CREATE_CMDID, WMI_10_2_VDEV_DELETE_CMDID, WMI_10_2_VDEV_START_REQUEST_CMDID, WMI_10_2_VDEV_RESTART_REQUEST_CMDID, WMI_10_2_VDEV_UP_CMDID, WMI_10_2_VDEV_STOP_CMDID, WMI_10_2_VDEV_DOWN_CMDID, WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, WMI_10_2_VDEV_SET_PARAM_CMDID, WMI_10_2_VDEV_INSTALL_KEY_CMDID, WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, WMI_10_2_PEER_CREATE_CMDID, WMI_10_2_PEER_DELETE_CMDID, WMI_10_2_PEER_FLUSH_TIDS_CMDID, WMI_10_2_PEER_SET_PARAM_CMDID, WMI_10_2_PEER_ASSOC_CMDID, WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, WMI_10_2_PEER_MCAST_GROUP_CMDID, WMI_10_2_BCN_TX_CMDID, WMI_10_2_BCN_PRB_TMPL_CMDID, WMI_10_2_BCN_FILTER_RX_CMDID, WMI_10_2_PRB_REQ_FILTER_RX_CMDID, WMI_10_2_MGMT_TX_CMDID, WMI_10_2_ADDBA_CLEAR_RESP_CMDID, WMI_10_2_ADDBA_SEND_CMDID, WMI_10_2_ADDBA_STATUS_CMDID, WMI_10_2_DELBA_SEND_CMDID, WMI_10_2_ADDBA_SET_RESP_CMDID, WMI_10_2_SEND_SINGLEAMSDU_CMDID, WMI_10_2_STA_POWERSAVE_MODE_CMDID, WMI_10_2_STA_POWERSAVE_PARAM_CMDID, WMI_10_2_STA_MIMO_PS_MODE_CMDID, WMI_10_2_DBGLOG_CFG_CMDID, WMI_10_2_PDEV_DFS_ENABLE_CMDID, WMI_10_2_PDEV_DFS_DISABLE_CMDID, WMI_10_2_PDEV_QVIT_CMDID, WMI_10_2_ROAM_SCAN_MODE, WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, WMI_10_2_ROAM_SCAN_PERIOD, WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, WMI_10_2_ROAM_AP_PROFILE, WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, WMI_10_2_OFL_SCAN_PERIOD, WMI_10_2_P2P_DEV_SET_DEVICE_INFO, WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, WMI_10_2_P2P_GO_SET_BEACON_IE, WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, WMI_10_2_AP_PS_PEER_PARAM_CMDID, WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, WMI_10_2_PDEV_SUSPEND_CMDID, WMI_10_2_PDEV_RESUME_CMDID, WMI_10_2_ADD_BCN_FILTER_CMDID, WMI_10_2_RMV_BCN_FILTER_CMDID, WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, WMI_10_2_WOW_ENABLE_CMDID, WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, WMI_10_2_RTT_MEASREQ_CMDID, WMI_10_2_RTT_TSF_CMDID, WMI_10_2_RTT_KEEPALIVE_CMDID, WMI_10_2_PDEV_SEND_BCN_CMDID, WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, WMI_10_2_REQUEST_STATS_CMDID, WMI_10_2_GPIO_CONFIG_CMDID, WMI_10_2_GPIO_OUTPUT_CMDID, WMI_10_2_VDEV_RATEMASK_CMDID, WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, WMI_10_2_FORCE_FW_HANG_CMDID, WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, WMI_10_2_PDEV_GET_INFO, WMI_10_2_VDEV_GET_INFO, WMI_10_2_VDEV_ATF_REQUEST_CMDID, WMI_10_2_PEER_ATF_REQUEST_CMDID, WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, WMI_10_2_MU_CAL_START_CMDID, WMI_10_2_SET_LTEU_CONFIG_CMDID, WMI_10_2_SET_CCA_PARAMS, WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, WMI_10_2_FWTEST_CMDID, WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID, WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, }; enum wmi_10_2_event_id { WMI_10_2_SERVICE_READY_EVENTID = 0x8000, WMI_10_2_READY_EVENTID, WMI_10_2_DEBUG_MESG_EVENTID, WMI_10_2_START_EVENTID = 0x9000, WMI_10_2_END_EVENTID = 0x9FFF, WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, WMI_10_2_ECHO_EVENTID, WMI_10_2_UPDATE_STATS_EVENTID, WMI_10_2_INST_RSSI_STATS_EVENTID, WMI_10_2_VDEV_START_RESP_EVENTID, WMI_10_2_VDEV_STANDBY_REQ_EVENTID, WMI_10_2_VDEV_RESUME_REQ_EVENTID, WMI_10_2_VDEV_STOPPED_EVENTID, WMI_10_2_PEER_STA_KICKOUT_EVENTID, WMI_10_2_HOST_SWBA_EVENTID, WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, WMI_10_2_MGMT_RX_EVENTID, WMI_10_2_CHAN_INFO_EVENTID, WMI_10_2_PHYERR_EVENTID, WMI_10_2_ROAM_EVENTID, WMI_10_2_PROFILE_MATCH, WMI_10_2_DEBUG_PRINT_EVENTID, WMI_10_2_PDEV_QVIT_EVENTID, WMI_10_2_WLAN_PROFILE_DATA_EVENTID, WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, WMI_10_2_RTT_ERROR_REPORT_EVENTID, WMI_10_2_RTT_KEEPALIVE_EVENTID, WMI_10_2_WOW_WAKEUP_HOST_EVENTID, WMI_10_2_DCS_INTERFERENCE_EVENTID, WMI_10_2_PDEV_TPC_CONFIG_EVENTID, WMI_10_2_GPIO_INPUT_EVENTID, WMI_10_2_PEER_RATECODE_LIST_EVENTID, WMI_10_2_GENERIC_BUFFER_EVENTID, WMI_10_2_MCAST_BUF_RELEASE_EVENTID, WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, WMI_10_2_WDS_PEER_EVENTID, WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, WMI_10_2_PDEV_TEMPERATURE_EVENTID, WMI_10_2_MU_REPORT_EVENTID, WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, }; enum wmi_10_4_cmd_id { WMI_10_4_START_CMDID = 0x9000, WMI_10_4_END_CMDID = 0x9FFF, WMI_10_4_INIT_CMDID, WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, WMI_10_4_STOP_SCAN_CMDID, WMI_10_4_SCAN_CHAN_LIST_CMDID, WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, WMI_10_4_ECHO_CMDID, WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, WMI_10_4_PDEV_SET_CHANNEL_CMDID, WMI_10_4_PDEV_SET_PARAM_CMDID, WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, WMI_10_4_VDEV_CREATE_CMDID, WMI_10_4_VDEV_DELETE_CMDID, WMI_10_4_VDEV_START_REQUEST_CMDID, WMI_10_4_VDEV_RESTART_REQUEST_CMDID, WMI_10_4_VDEV_UP_CMDID, WMI_10_4_VDEV_STOP_CMDID, WMI_10_4_VDEV_DOWN_CMDID, WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, WMI_10_4_VDEV_SET_PARAM_CMDID, WMI_10_4_VDEV_INSTALL_KEY_CMDID, WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, WMI_10_4_PEER_CREATE_CMDID, WMI_10_4_PEER_DELETE_CMDID, WMI_10_4_PEER_FLUSH_TIDS_CMDID, WMI_10_4_PEER_SET_PARAM_CMDID, WMI_10_4_PEER_ASSOC_CMDID, WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, WMI_10_4_PEER_MCAST_GROUP_CMDID, WMI_10_4_BCN_TX_CMDID, WMI_10_4_PDEV_SEND_BCN_CMDID, WMI_10_4_BCN_PRB_TMPL_CMDID, WMI_10_4_BCN_FILTER_RX_CMDID, WMI_10_4_PRB_REQ_FILTER_RX_CMDID, WMI_10_4_MGMT_TX_CMDID, WMI_10_4_PRB_TMPL_CMDID, WMI_10_4_ADDBA_CLEAR_RESP_CMDID, WMI_10_4_ADDBA_SEND_CMDID, WMI_10_4_ADDBA_STATUS_CMDID, WMI_10_4_DELBA_SEND_CMDID, WMI_10_4_ADDBA_SET_RESP_CMDID, WMI_10_4_SEND_SINGLEAMSDU_CMDID, WMI_10_4_STA_POWERSAVE_MODE_CMDID, WMI_10_4_STA_POWERSAVE_PARAM_CMDID, WMI_10_4_STA_MIMO_PS_MODE_CMDID, WMI_10_4_DBGLOG_CFG_CMDID, WMI_10_4_PDEV_DFS_ENABLE_CMDID, WMI_10_4_PDEV_DFS_DISABLE_CMDID, WMI_10_4_PDEV_QVIT_CMDID, WMI_10_4_ROAM_SCAN_MODE, WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, WMI_10_4_ROAM_SCAN_PERIOD, WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, WMI_10_4_ROAM_AP_PROFILE, WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, WMI_10_4_OFL_SCAN_PERIOD, WMI_10_4_P2P_DEV_SET_DEVICE_INFO, WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, WMI_10_4_P2P_GO_SET_BEACON_IE, WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, WMI_10_4_AP_PS_PEER_PARAM_CMDID, WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, WMI_10_4_PDEV_SUSPEND_CMDID, WMI_10_4_PDEV_RESUME_CMDID, WMI_10_4_ADD_BCN_FILTER_CMDID, WMI_10_4_RMV_BCN_FILTER_CMDID, WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, WMI_10_4_WOW_ENABLE_CMDID, WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, WMI_10_4_RTT_MEASREQ_CMDID, WMI_10_4_RTT_TSF_CMDID, WMI_10_4_RTT_KEEPALIVE_CMDID, WMI_10_4_OEM_REQ_CMDID, WMI_10_4_NAN_CMDID, WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, WMI_10_4_REQUEST_STATS_CMDID, WMI_10_4_GPIO_CONFIG_CMDID, WMI_10_4_GPIO_OUTPUT_CMDID, WMI_10_4_VDEV_RATEMASK_CMDID, WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, WMI_10_4_GTK_OFFLOAD_CMDID, WMI_10_4_QBOOST_CFG_CMDID, WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, WMI_10_4_FORCE_FW_HANG_CMDID, WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, WMI_10_4_PDEV_FIPS_CMDID, WMI_10_4_TT_SET_CONF_CMDID, WMI_10_4_FWTEST_CMDID, WMI_10_4_VDEV_ATF_REQUEST_CMDID, WMI_10_4_PEER_ATF_REQUEST_CMDID, WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, WMI_10_4_PDEV_GET_TPC_CMDID, WMI_10_4_PDEV_GET_AST_INFO_CMDID, WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, WMI_10_4_PDEV_GET_INFO_CMDID, WMI_10_4_VDEV_GET_INFO_CMDID, WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, WMI_10_4_MU_CAL_START_CMDID, WMI_10_4_SET_CCA_PARAMS_CMDID, WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, WMI_10_4_EXT_RESOURCE_CFG_CMDID, WMI_10_4_VDEV_SET_IE_CMDID, WMI_10_4_SET_LTEU_CONFIG_CMDID, WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, WMI_10_4_PEER_BWF_REQUEST_CMDID, WMI_10_4_BTCOEX_CFG_CMDID, WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, WMI_10_4_COEX_VERSION_CFG_CMID, WMI_10_4_PDEV_GET_RX_FILTER_CMDID, WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, WMI_10_4_CONFIG_SMART_LOGGING_CMDID, WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, WMI_10_4_GET_TSF_TIMER_CMDID, WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, WMI_10_4_TDLS_SET_STATE_CMDID, WMI_10_4_TDLS_PEER_UPDATE_CMDID, WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, WMI_10_4_PDEV_SEND_FD_CMDID, WMI_10_4_ENABLE_FILS_CMDID, WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID, WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID, WMI_10_4_RADAR_FOUND_CMDID, WMI_10_4_PEER_CFR_CAPTURE_CMDID, WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID, WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, }; enum wmi_10_4_event_id { WMI_10_4_SERVICE_READY_EVENTID = 0x8000, WMI_10_4_READY_EVENTID, WMI_10_4_DEBUG_MESG_EVENTID, WMI_10_4_START_EVENTID = 0x9000, WMI_10_4_END_EVENTID = 0x9FFF, WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, WMI_10_4_ECHO_EVENTID, WMI_10_4_UPDATE_STATS_EVENTID, WMI_10_4_INST_RSSI_STATS_EVENTID, WMI_10_4_VDEV_START_RESP_EVENTID, WMI_10_4_VDEV_STANDBY_REQ_EVENTID, WMI_10_4_VDEV_RESUME_REQ_EVENTID, WMI_10_4_VDEV_STOPPED_EVENTID, WMI_10_4_PEER_STA_KICKOUT_EVENTID, WMI_10_4_HOST_SWBA_EVENTID, WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, WMI_10_4_MGMT_RX_EVENTID, WMI_10_4_CHAN_INFO_EVENTID, WMI_10_4_PHYERR_EVENTID, WMI_10_4_ROAM_EVENTID, WMI_10_4_PROFILE_MATCH, WMI_10_4_DEBUG_PRINT_EVENTID, WMI_10_4_PDEV_QVIT_EVENTID, WMI_10_4_WLAN_PROFILE_DATA_EVENTID, WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, WMI_10_4_RTT_ERROR_REPORT_EVENTID, WMI_10_4_RTT_KEEPALIVE_EVENTID, WMI_10_4_OEM_CAPABILITY_EVENTID, WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, WMI_10_4_OEM_ERROR_REPORT_EVENTID, WMI_10_4_NAN_EVENTID, WMI_10_4_WOW_WAKEUP_HOST_EVENTID, WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, WMI_10_4_GTK_REKEY_FAIL_EVENTID, WMI_10_4_DCS_INTERFERENCE_EVENTID, WMI_10_4_PDEV_TPC_CONFIG_EVENTID, WMI_10_4_CSA_HANDLING_EVENTID, WMI_10_4_GPIO_INPUT_EVENTID, WMI_10_4_PEER_RATECODE_LIST_EVENTID, WMI_10_4_GENERIC_BUFFER_EVENTID, WMI_10_4_MCAST_BUF_RELEASE_EVENTID, WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, WMI_10_4_WDS_PEER_EVENTID, WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, WMI_10_4_PDEV_FIPS_EVENTID, WMI_10_4_TT_STATS_EVENTID, WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, WMI_10_4_PDEV_NFCAL_POWER_EVENTID, WMI_10_4_PDEV_TPC_EVENTID, WMI_10_4_PDEV_GET_AST_INFO_EVENTID, WMI_10_4_PDEV_TEMPERATURE_EVENTID, WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, WMI_10_4_MU_REPORT_EVENTID, WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, WMI_10_4_ATF_PEER_STATS_EVENTID, WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, WMI_10_4_NAC_RSSI_EVENTID, WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, WMI_10_4_PDEV_TPC_TABLE_EVENTID, WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, WMI_10_4_TDLS_PEER_EVENTID, WMI_10_4_HOST_SWFDA_EVENTID, WMI_10_4_ESP_ESTIMATE_EVENTID, WMI_10_4_DFS_STATUS_CHECK_EVENTID, WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, }; enum wmi_phy_mode { MODE_11A = 0, /* 11a Mode */ MODE_11G = 1, /* 11b/g Mode */ MODE_11B = 2, /* 11b Mode */ MODE_11GONLY = 3, /* 11g only Mode */ MODE_11NA_HT20 = 4, /* 11a HT20 mode */ MODE_11NG_HT20 = 5, /* 11g HT20 mode */ MODE_11NA_HT40 = 6, /* 11a HT40 mode */ MODE_11NG_HT40 = 7, /* 11g HT40 mode */ MODE_11AC_VHT20 = 8, MODE_11AC_VHT40 = 9, MODE_11AC_VHT80 = 10, /* MODE_11AC_VHT160 = 11, */ MODE_11AC_VHT20_2G = 11, MODE_11AC_VHT40_2G = 12, MODE_11AC_VHT80_2G = 13, MODE_11AC_VHT80_80 = 14, MODE_11AC_VHT160 = 15, MODE_UNKNOWN = 16, MODE_MAX = 16 }; static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) { switch (mode) { case MODE_11A: return "11a"; case MODE_11G: return "11g"; case MODE_11B: return "11b"; case MODE_11GONLY: return "11gonly"; case MODE_11NA_HT20: return "11na-ht20"; case MODE_11NG_HT20: return "11ng-ht20"; case MODE_11NA_HT40: return "11na-ht40"; case MODE_11NG_HT40: return "11ng-ht40"; case MODE_11AC_VHT20: return "11ac-vht20"; case MODE_11AC_VHT40: return "11ac-vht40"; case MODE_11AC_VHT80: return "11ac-vht80"; case MODE_11AC_VHT160: return "11ac-vht160"; case MODE_11AC_VHT80_80: return "11ac-vht80+80"; case MODE_11AC_VHT20_2G: return "11ac-vht20-2g"; case MODE_11AC_VHT40_2G: return "11ac-vht40-2g"; case MODE_11AC_VHT80_2G: return "11ac-vht80-2g"; case MODE_UNKNOWN: /* skip */ break; /* no default handler to allow compiler to check that the * enum is fully handled */ } return ""; } #define WMI_CHAN_LIST_TAG 0x1 #define WMI_SSID_LIST_TAG 0x2 #define WMI_BSSID_LIST_TAG 0x3 #define WMI_IE_TAG 0x4 struct wmi_channel { __le32 mhz; __le32 band_center_freq1; __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ union { __le32 flags; /* WMI_CHAN_FLAG_ */ struct { u8 mode; /* only 6 LSBs */ } __packed; } __packed; union { __le32 reginfo0; struct { /* note: power unit is 0.5 dBm */ u8 min_power; u8 max_power; u8 reg_power; u8 reg_classid; } __packed; } __packed; union { __le32 reginfo1; struct { u8 antenna_max; u8 max_tx_power; } __packed; } __packed; } __packed; struct wmi_channel_arg { u32 freq; u32 band_center_freq1; u32 band_center_freq2; bool passive; bool allow_ibss; bool allow_ht; bool allow_vht; bool ht40plus; bool chan_radar; /* note: power unit is 0.5 dBm */ u32 min_power; u32 max_power; u32 max_reg_power; u32 max_antenna_gain; u32 reg_class_id; enum wmi_phy_mode mode; }; enum wmi_channel_change_cause { WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, WMI_CHANNEL_CHANGE_CAUSE_CSA, }; #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) #define WMI_CHAN_FLAG_PASSIVE (1 << 7) #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) #define WMI_CHAN_FLAG_DFS (1 << 10) #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) /* Indicate reason for channel switch */ #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) /* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/ #define WMI_CHAN_FLAG_DFS_CFREQ2 (1 << 15) #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ /* HT Capabilities*/ #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 #define WMI_HT_CAP_HT40_SGI 0x0800 #define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */ #define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */ #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ WMI_HT_CAP_HT20_SGI | \ WMI_HT_CAP_HT40_SGI | \ WMI_HT_CAP_TX_STBC | \ WMI_HT_CAP_RX_STBC | \ WMI_HT_CAP_LDPC) /* * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information * field. The fields not defined here are not supported, or reserved. * Do not change these masks and if you have to add new one follow the * bitmask as specified by 802.11ac draft. */ #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 #define WMI_VHT_CAP_RX_LDPC 0x00000010 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 #define WMI_VHT_CAP_TX_STBC 0x00000080 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 #define WMI_VHT_CAP_SU_BFER 0x00000800 #define WMI_VHT_CAP_SU_BFEE 0x00001000 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 #define WMI_VHT_CAP_MU_BFER 0x00080000 #define WMI_VHT_CAP_MU_BFEE 0x00100000 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 /* The following also refer for max HT AMSDU */ #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ WMI_VHT_CAP_RX_LDPC | \ WMI_VHT_CAP_SGI_80MHZ | \ WMI_VHT_CAP_TX_STBC | \ WMI_VHT_CAP_RX_STBC_MASK | \ WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ WMI_VHT_CAP_RX_FIXED_ANT | \ WMI_VHT_CAP_TX_FIXED_ANT) /* * Interested readers refer to Rx/Tx MCS Map definition as defined in * 802.11ac */ #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 enum { REGDMN_MODE_11A = 0x00001, /* 11a channels */ REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ REGDMN_MODE_11B = 0x00004, /* 11b channels */ REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ REGDMN_MODE_11G = 0x00008, /* XXX historical */ REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ REGDMN_MODE_XR = 0x00100, /* XR channels */ REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ REGDMN_MODE_ALL = 0xffffffff }; #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 /* regulatory capabilities */ #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 struct hal_reg_capabilities { /* regdomain value specified in EEPROM */ __le32 eeprom_rd; /*regdomain */ __le32 eeprom_rd_ext; /* CAP1 capabilities bit map. */ __le32 regcap1; /* REGDMN EEPROM CAP. */ __le32 regcap2; /* REGDMN MODE */ __le32 wireless_modes; __le32 low_2ghz_chan; __le32 high_2ghz_chan; __le32 low_5ghz_chan; __le32 high_5ghz_chan; } __packed; enum wlan_mode_capability { WHAL_WLAN_11A_CAPABILITY = 0x1, WHAL_WLAN_11G_CAPABILITY = 0x2, WHAL_WLAN_11AG_CAPABILITY = 0x3, }; /* structure used by FW for requesting host memory */ struct wlan_host_mem_req { /* ID of the request */ __le32 req_id; /* size of the of each unit */ __le32 unit_size; /* flags to indicate that * the number units is dependent * on number of resources(num vdevs num peers .. etc) */ __le32 num_unit_info; /* * actual number of units to allocate . if flags in the num_unit_info * indicate that number of units is tied to number of a particular * resource to allocate then num_units filed is set to 0 and host * will derive the number units from number of the resources it is * requesting. */ __le32 num_units; } __packed; /* * The following struct holds optional payload for * wmi_service_ready_event,e.g., 11ac pass some of the * device capability to the host. */ struct wmi_service_ready_event { __le32 sw_version; __le32 sw_version_1; __le32 abi_version; /* WMI_PHY_CAPABILITY */ __le32 phy_capability; /* Maximum number of frag table entries that SW will populate less 1 */ __le32 max_frag_entry; __le32 wmi_service_bitmap[16]; __le32 num_rf_chains; /* * The following field is only valid for service type * WMI_SERVICE_11AC */ __le32 ht_cap_info; /* WMI HT Capability */ __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ __le32 hw_min_tx_power; __le32 hw_max_tx_power; struct hal_reg_capabilities hal_reg_capabilities; __le32 sys_cap_info; __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ /* * Max beacon and Probe Response IE offload size * (includes optional P2P IEs) */ __le32 max_bcn_ie_size; /* * request to host to allocate a chuck of memory and pss it down to FW * via WM_INIT. FW uses this as FW extesnsion memory for saving its * data structures. Only valid for low latency interfaces like PCIE * where FW can access this memory directly (or) by DMA. */ __le32 num_mem_reqs; struct wlan_host_mem_req mem_reqs[]; } __packed; /* This is the definition from 10.X firmware branch */ struct wmi_10x_service_ready_event { __le32 sw_version; __le32 abi_version; /* WMI_PHY_CAPABILITY */ __le32 phy_capability; /* Maximum number of frag table entries that SW will populate less 1 */ __le32 max_frag_entry; __le32 wmi_service_bitmap[16]; __le32 num_rf_chains; /* * The following field is only valid for service type * WMI_SERVICE_11AC */ __le32 ht_cap_info; /* WMI HT Capability */ __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ __le32 hw_min_tx_power; __le32 hw_max_tx_power; struct hal_reg_capabilities hal_reg_capabilities; __le32 sys_cap_info; __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ /* * request to host to allocate a chuck of memory and pss it down to FW * via WM_INIT. FW uses this as FW extesnsion memory for saving its * data structures. Only valid for low latency interfaces like PCIE * where FW can access this memory directly (or) by DMA. */ __le32 num_mem_reqs; struct wlan_host_mem_req mem_reqs[]; } __packed; #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) struct wmi_ready_event { __le32 sw_version; __le32 abi_version; struct wmi_mac_addr mac_addr; __le32 status; } __packed; struct wmi_resource_config { /* number of virtual devices (VAPs) to support */ __le32 num_vdevs; /* number of peer nodes to support */ __le32 num_peers; /* * In offload mode target supports features like WOW, chatter and * other protocol offloads. In order to support them some * functionalities like reorder buffering, PN checking need to be * done in target. This determines maximum number of peers supported * by target in offload mode */ __le32 num_offload_peers; /* For target-based RX reordering */ __le32 num_offload_reorder_bufs; /* number of keys per peer */ __le32 num_peer_keys; /* total number of TX/RX data TIDs */ __le32 num_tids; /* * max skid for resolving hash collisions * * The address search table is sparse, so that if two MAC addresses * result in the same hash value, the second of these conflicting * entries can slide to the next index in the address search table, * and use it, if it is unoccupied. This ast_skid_limit parameter * specifies the upper bound on how many subsequent indices to search * over to find an unoccupied space. */ __le32 ast_skid_limit; /* * the nominal chain mask for transmit * * The chain mask may be modified dynamically, e.g. to operate AP * tx with a reduced number of chains if no clients are associated. * This configuration parameter specifies the nominal chain-mask that * should be used when not operating with a reduced set of tx chains. */ __le32 tx_chain_mask; /* * the nominal chain mask for receive * * The chain mask may be modified dynamically, e.g. for a client * to use a reduced number of chains for receive if the traffic to * the client is low enough that it doesn't require downlink MIMO * or antenna diversity. * This configuration parameter specifies the nominal chain-mask that * should be used when not operating with a reduced set of rx chains. */ __le32 rx_chain_mask; /* * what rx reorder timeout (ms) to use for the AC * * Each WMM access class (voice, video, best-effort, background) will * have its own timeout value to dictate how long to wait for missing * rx MPDUs to arrive before flushing subsequent MPDUs that have * already been received. * This parameter specifies the timeout in milliseconds for each * class. */ __le32 rx_timeout_pri_vi; __le32 rx_timeout_pri_vo; __le32 rx_timeout_pri_be; __le32 rx_timeout_pri_bk; /* * what mode the rx should decap packets to * * MAC can decap to RAW (no decap), native wifi or Ethernet types * THis setting also determines the default TX behavior, however TX * behavior can be modified on a per VAP basis during VAP init */ __le32 rx_decap_mode; /* what is the maximum number of scan requests that can be queued */ __le32 scan_max_pending_reqs; /* maximum VDEV that could use BMISS offload */ __le32 bmiss_offload_max_vdev; /* maximum VDEV that could use offload roaming */ __le32 roam_offload_max_vdev; /* maximum AP profiles that would push to offload roaming */ __le32 roam_offload_max_ap_profiles; /* * how many groups to use for mcast->ucast conversion * * The target's WAL maintains a table to hold information regarding * which peers belong to a given multicast group, so that if * multicast->unicast conversion is enabled, the target can convert * multicast tx frames to a series of unicast tx frames, to each * peer within the multicast group. This num_mcast_groups configuration parameter tells the target how * many multicast groups to provide storage for within its multicast * group membership table. */ __le32 num_mcast_groups; /* * size to alloc for the mcast membership table * * This num_mcast_table_elems configuration parameter tells the * target how many peer elements it needs to provide storage for in * its multicast group membership table. * These multicast group membership table elements are shared by the * multicast groups stored within the table. */ __le32 num_mcast_table_elems; /* * whether/how to do multicast->unicast conversion * * This configuration parameter specifies whether the target should * perform multicast --> unicast conversion on transmit, and if so, * what to do if it finds no entries in its multicast group * membership table for the multicast IP address in the tx frame. * Configuration value: * 0 -> Do not perform multicast to unicast conversion. * 1 -> Convert multicast frames to unicast, if the IP multicast * address from the tx frame is found in the multicast group * membership table. If the IP multicast address is not found, * drop the frame. * 2 -> Convert multicast frames to unicast, if the IP multicast * address from the tx frame is found in the multicast group * membership table. If the IP multicast address is not found, * transmit the frame as multicast. */ __le32 mcast2ucast_mode; /* * how much memory to allocate for a tx PPDU dbg log * * This parameter controls how much memory the target will allocate * to store a log of tx PPDU meta-information (how large the PPDU * was, when it was sent, whether it was successful, etc.) */ __le32 tx_dbg_log_size; /* how many AST entries to be allocated for WDS */ __le32 num_wds_entries; /* * MAC DMA burst size, e.g., For target PCI limit can be * 0 -default, 1 256B */ __le32 dma_burst_size; /* * Fixed delimiters to be inserted after every MPDU to * account for interface latency to avoid underrun. */ __le32 mac_aggr_delim; /* * determine whether target is responsible for detecting duplicate * non-aggregate MPDU and timing out stale fragments. * * A-MPDU reordering is always performed on the target. * * 0: target responsible for frag timeout and dup checking * 1: host responsible for frag timeout and dup checking */ __le32 rx_skip_defrag_timeout_dup_detection_check; /* * Configuration for VoW : * No of Video Nodes to be supported * and Max no of descriptors for each Video link (node). */ __le32 vow_config; /* maximum VDEV that could use GTK offload */ __le32 gtk_offload_max_vdev; /* Number of msdu descriptors target should use */ __le32 num_msdu_desc; /* * Max. number of Tx fragments per MSDU * This parameter controls the max number of Tx fragments per MSDU. * This is sent by the target as part of the WMI_SERVICE_READY event * and is overridden by the OS shim as required. */ __le32 max_frag_entries; } __packed; struct wmi_resource_config_10x { /* number of virtual devices (VAPs) to support */ __le32 num_vdevs; /* number of peer nodes to support */ __le32 num_peers; /* number of keys per peer */ __le32 num_peer_keys; /* total number of TX/RX data TIDs */ __le32 num_tids; /* * max skid for resolving hash collisions * * The address search table is sparse, so that if two MAC addresses * result in the same hash value, the second of these conflicting * entries can slide to the next index in the address search table, * and use it, if it is unoccupied. This ast_skid_limit parameter * specifies the upper bound on how many subsequent indices to search * over to find an unoccupied space. */ __le32 ast_skid_limit; /* * the nominal chain mask for transmit * * The chain mask may be modified dynamically, e.g. to operate AP * tx with a reduced number of chains if no clients are associated. * This configuration parameter specifies the nominal chain-mask that * should be used when not operating with a reduced set of tx chains. */ __le32 tx_chain_mask; /* * the nominal chain mask for receive * * The chain mask may be modified dynamically, e.g. for a client * to use a reduced number of chains for receive if the traffic to * the client is low enough that it doesn't require downlink MIMO * or antenna diversity. * This configuration parameter specifies the nominal chain-mask that * should be used when not operating with a reduced set of rx chains. */ __le32 rx_chain_mask; /* * what rx reorder timeout (ms) to use for the AC * * Each WMM access class (voice, video, best-effort, background) will * have its own timeout value to dictate how long to wait for missing * rx MPDUs to arrive before flushing subsequent MPDUs that have * already been received. * This parameter specifies the timeout in milliseconds for each * class. */ __le32 rx_timeout_pri_vi; __le32 rx_timeout_pri_vo; __le32 rx_timeout_pri_be; __le32 rx_timeout_pri_bk; /* * what mode the rx should decap packets to * * MAC can decap to RAW (no decap), native wifi or Ethernet types * THis setting also determines the default TX behavior, however TX * behavior can be modified on a per VAP basis during VAP init */ __le32 rx_decap_mode; /* what is the maximum number of scan requests that can be queued */ __le32 scan_max_pending_reqs; /* maximum VDEV that could use BMISS offload */ __le32 bmiss_offload_max_vdev; /* maximum VDEV that could use offload roaming */ __le32 roam_offload_max_vdev; /* maximum AP profiles that would push to offload roaming */ __le32 roam_offload_max_ap_profiles; /* * how many groups to use for mcast->ucast conversion * * The target's WAL maintains a table to hold information regarding * which peers belong to a given multicast group, so that if * multicast->unicast conversion is enabled, the target can convert * multicast tx frames to a series of unicast tx frames, to each * peer within the multicast group. This num_mcast_groups configuration parameter tells the target how * many multicast groups to provide storage for within its multicast * group membership table. */ __le32 num_mcast_groups; /* * size to alloc for the mcast membership table * * This num_mcast_table_elems configuration parameter tells the * target how many peer elements it needs to provide storage for in * its multicast group membership table. * These multicast group membership table elements are shared by the * multicast groups stored within the table. */ __le32 num_mcast_table_elems; /* * whether/how to do multicast->unicast conversion * * This configuration parameter specifies whether the target should * perform multicast --> unicast conversion on transmit, and if so, * what to do if it finds no entries in its multicast group * membership table for the multicast IP address in the tx frame. * Configuration value: * 0 -> Do not perform multicast to unicast conversion. * 1 -> Convert multicast frames to unicast, if the IP multicast * address from the tx frame is found in the multicast group * membership table. If the IP multicast address is not found, * drop the frame. * 2 -> Convert multicast frames to unicast, if the IP multicast * address from the tx frame is found in the multicast group * membership table. If the IP multicast address is not found, * transmit the frame as multicast. */ __le32 mcast2ucast_mode; /* * how much memory to allocate for a tx PPDU dbg log * * This parameter controls how much memory the target will allocate * to store a log of tx PPDU meta-information (how large the PPDU * was, when it was sent, whether it was successful, etc.) */ __le32 tx_dbg_log_size; /* how many AST entries to be allocated for WDS */ __le32 num_wds_entries; /* * MAC DMA burst size, e.g., For target PCI limit can be * 0 -default, 1 256B */ __le32 dma_burst_size; /* * Fixed delimiters to be inserted after every MPDU to * account for interface latency to avoid underrun. */ __le32 mac_aggr_delim; /* * determine whether target is responsible for detecting duplicate * non-aggregate MPDU and timing out stale fragments. * * A-MPDU reordering is always performed on the target. * * 0: target responsible for frag timeout and dup checking * 1: host responsible for frag timeout and dup checking */ __le32 rx_skip_defrag_timeout_dup_detection_check; /* * Configuration for VoW : * No of Video Nodes to be supported * and Max no of descriptors for each Video link (node). */ __le32 vow_config; /* Number of msdu descriptors target should use */ __le32 num_msdu_desc; /* * Max. number of Tx fragments per MSDU * This parameter controls the max number of Tx fragments per MSDU. * This is sent by the target as part of the WMI_SERVICE_READY event * and is overridden by the OS shim as required. */ __le32 max_frag_entries; } __packed; enum wmi_10_2_feature_mask { WMI_10_2_RX_BATCH_MODE = BIT(0), WMI_10_2_ATF_CONFIG = BIT(1), WMI_10_2_COEX_GPIO = BIT(3), WMI_10_2_BSS_CHAN_INFO = BIT(6), WMI_10_2_PEER_STATS = BIT(7), }; struct wmi_resource_config_10_2 { struct wmi_resource_config_10x common; __le32 max_peer_ext_stats; __le32 smart_ant_cap; /* 0-disable, 1-enable */ __le32 bk_min_free; __le32 be_min_free; __le32 vi_min_free; __le32 vo_min_free; __le32 feature_mask; } __packed; #define NUM_UNITS_IS_NUM_VDEVS BIT(0) #define NUM_UNITS_IS_NUM_PEERS BIT(1) #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) struct wmi_resource_config_10_4 { /* Number of virtual devices (VAPs) to support */ __le32 num_vdevs; /* Number of peer nodes to support */ __le32 num_peers; /* Number of active peer nodes to support */ __le32 num_active_peers; /* In offload mode, target supports features like WOW, chatter and other * protocol offloads. In order to support them some functionalities like * reorder buffering, PN checking need to be done in target. * This determines maximum number of peers supported by target in * offload mode. */ __le32 num_offload_peers; /* Number of reorder buffers available for doing target based reorder * Rx reorder buffering */ __le32 num_offload_reorder_buffs; /* Number of keys per peer */ __le32 num_peer_keys; /* Total number of TX/RX data TIDs */ __le32 num_tids; /* Max skid for resolving hash collisions. * The address search table is sparse, so that if two MAC addresses * result in the same hash value, the second of these conflicting * entries can slide to the next index in the address search table, * and use it, if it is unoccupied. This ast_skid_limit parameter * specifies the upper bound on how many subsequent indices to search * over to find an unoccupied space. */ __le32 ast_skid_limit; /* The nominal chain mask for transmit. * The chain mask may be modified dynamically, e.g. to operate AP tx * with a reduced number of chains if no clients are associated. * This configuration parameter specifies the nominal chain-mask that * should be used when not operating with a reduced set of tx chains. */ __le32 tx_chain_mask; /* The nominal chain mask for receive. * The chain mask may be modified dynamically, e.g. for a client to use * a reduced number of chains for receive if the traffic to the client * is low enough that it doesn't require downlink MIMO or antenna * diversity. This configuration parameter specifies the nominal * chain-mask that should be used when not operating with a reduced * set of rx chains. */ __le32 rx_chain_mask; /* What rx reorder timeout (ms) to use for the AC. * Each WMM access class (voice, video, best-effort, background) will * have its own timeout value to dictate how long to wait for missing * rx MPDUs to arrive before flushing subsequent MPDUs that have already * been received. This parameter specifies the timeout in milliseconds * for each class. */ __le32 rx_timeout_pri[4]; /* What mode the rx should decap packets to. * MAC can decap to RAW (no decap), native wifi or Ethernet types. * This setting also determines the default TX behavior, however TX * behavior can be modified on a per VAP basis during VAP init */ __le32 rx_decap_mode; __le32 scan_max_pending_req; __le32 bmiss_offload_max_vdev; __le32 roam_offload_max_vdev; __le32 roam_offload_max_ap_profiles; /* How many groups to use for mcast->ucast conversion. * The target's WAL maintains a table to hold information regarding * which peers belong to a given multicast group, so that if * multicast->unicast conversion is enabled, the target can convert * multicast tx frames to a series of unicast tx frames, to each peer * within the multicast group. This num_mcast_groups configuration * parameter tells the target how many multicast groups to provide * storage for within its multicast group membership table. */ __le32 num_mcast_groups; /* Size to alloc for the mcast membership table. * This num_mcast_table_elems configuration parameter tells the target * how many peer elements it needs to provide storage for in its * multicast group membership table. These multicast group membership * table elements are shared by the multicast groups stored within * the table. */ __le32 num_mcast_table_elems; /* Whether/how to do multicast->unicast conversion. * This configuration parameter specifies whether the target should * perform multicast --> unicast conversion on transmit, and if so, * what to do if it finds no entries in its multicast group membership * table for the multicast IP address in the tx frame. * Configuration value: * 0 -> Do not perform multicast to unicast conversion. * 1 -> Convert multicast frames to unicast, if the IP multicast address * from the tx frame is found in the multicast group membership * table. If the IP multicast address is not found, drop the frame * 2 -> Convert multicast frames to unicast, if the IP multicast address * from the tx frame is found in the multicast group membership * table. If the IP multicast address is not found, transmit the * frame as multicast. */ __le32 mcast2ucast_mode; /* How much memory to allocate for a tx PPDU dbg log. * This parameter controls how much memory the target will allocate to * store a log of tx PPDU meta-information (how large the PPDU was, * when it was sent, whether it was successful, etc.) */ __le32 tx_dbg_log_size; /* How many AST entries to be allocated for WDS */ __le32 num_wds_entries; /* MAC DMA burst size. 0 -default, 1 -256B */ __le32 dma_burst_size; /* Fixed delimiters to be inserted after every MPDU to account for * interface latency to avoid underrun. */ __le32 mac_aggr_delim; /* Determine whether target is responsible for detecting duplicate * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering * is always performed on the target. * * 0: target responsible for frag timeout and dup checking * 1: host responsible for frag timeout and dup checking */ __le32 rx_skip_defrag_timeout_dup_detection_check; /* Configuration for VoW : No of Video nodes to be supported and max * no of descriptors for each video link (node). */ __le32 vow_config; /* Maximum vdev that could use gtk offload */ __le32 gtk_offload_max_vdev; /* Number of msdu descriptors target should use */ __le32 num_msdu_desc; /* Max number of tx fragments per MSDU. * This parameter controls the max number of tx fragments per MSDU. * This will passed by target as part of the WMI_SERVICE_READY event * and is overridden by the OS shim as required. */ __le32 max_frag_entries; /* Max number of extended peer stats. * This parameter controls the max number of peers for which extended * statistics are supported by target */ __le32 max_peer_ext_stats; /* Smart antenna capabilities information. * 1 - Smart antenna is enabled * 0 - Smart antenna is disabled * In future this can contain smart antenna specific capabilities. */ __le32 smart_ant_cap; /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) * during init. */ __le32 bk_minfree; __le32 be_minfree; __le32 vi_minfree; __le32 vo_minfree; /* Rx batch mode capability. * 1 - Rx batch mode enabled * 0 - Rx batch mode disabled */ __le32 rx_batchmode; /* Thermal throttling capability. * 1 - Capable of thermal throttling * 0 - Not capable of thermal throttling */ __le32 tt_support; /* ATF configuration. * 1 - Enable ATF * 0 - Disable ATF */ __le32 atf_config; /* Configure padding to manage IP header un-alignment * 1 - Enable padding * 0 - Disable padding */ __le32 iphdr_pad_config; /* qwrap configuration (bits 15-0) * 1 - This is qwrap configuration * 0 - This is not qwrap * * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) * In order to get ack-RSSI reporting and to specify the tx-rate for * individual frames, this option must be enabled. This uses an extra * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. */ __le32 qwrap_config; } __packed; enum wmi_coex_version { WMI_NO_COEX_VERSION_SUPPORT = 0, /* 3 wire coex support*/ WMI_COEX_VERSION_1 = 1, /* 2.5 wire coex support*/ WMI_COEX_VERSION_2 = 2, /* 2.5 wire coex with duty cycle support */ WMI_COEX_VERSION_3 = 3, /* 4 wire coex support*/ WMI_COEX_VERSION_4 = 4, }; /** * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags * @WMI_10_4_LTEU_SUPPORT: LTEU config * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats * @WMI_10_4_PEER_STATS: Per station stats * @WMI_10_4_VDEV_STATS: Per vdev stats * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host * enable/disable * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable */ enum wmi_10_4_feature_mask { WMI_10_4_LTEU_SUPPORT = BIT(0), WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), WMI_10_4_PEER_STATS = BIT(5), WMI_10_4_VDEV_STATS = BIT(6), WMI_10_4_TDLS = BIT(7), WMI_10_4_TDLS_OFFCHAN = BIT(8), WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), WMI_10_4_TX_DATA_ACK_RSSI = BIT(16), WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17), WMI_10_4_REPORT_AIRTIME = BIT(18), }; struct wmi_ext_resource_config_10_4_cmd { /* contains enum wmi_host_platform_type */ __le32 host_platform_config; /* see enum wmi_10_4_feature_mask */ __le32 fw_feature_bitmap; /* WLAN priority GPIO number */ __le32 wlan_gpio_priority; /* see enum wmi_coex_version */ __le32 coex_version; /* COEX GPIO config */ __le32 coex_gpio_pin1; __le32 coex_gpio_pin2; __le32 coex_gpio_pin3; /* number of vdevs allowed to perform tdls */ __le32 num_tdls_vdevs; /* number of peers to track per TDLS vdev */ __le32 num_tdls_conn_table_entries; /* number of tdls sleep sta supported */ __le32 max_tdls_concurrent_sleep_sta; /* number of tdls buffer sta supported */ __le32 max_tdls_concurrent_buffer_sta; }; /* structure describing host memory chunk. */ struct host_memory_chunk { /* id of the request that is passed up in service ready */ __le32 req_id; /* the physical address the memory chunk */ __le32 ptr; /* size of the chunk */ __le32 size; } __packed; struct wmi_host_mem_chunks { __le32 count; /* some fw revisions require at least 1 chunk regardless of count */ struct host_memory_chunk items[1]; } __packed; struct wmi_init_cmd { struct wmi_resource_config resource_config; struct wmi_host_mem_chunks mem_chunks; } __packed; /* _10x structure is from 10.X FW API */ struct wmi_init_cmd_10x { struct wmi_resource_config_10x resource_config; struct wmi_host_mem_chunks mem_chunks; } __packed; struct wmi_init_cmd_10_2 { struct wmi_resource_config_10_2 resource_config; struct wmi_host_mem_chunks mem_chunks; } __packed; struct wmi_init_cmd_10_4 { struct wmi_resource_config_10_4 resource_config; struct wmi_host_mem_chunks mem_chunks; } __packed; struct wmi_chan_list_entry { __le16 freq; u8 phy_mode; /* valid for 10.2 only */ u8 reserved; } __packed; /* TLV for channel list */ struct wmi_chan_list { __le32 tag; /* WMI_CHAN_LIST_TAG */ __le32 num_chan; struct wmi_chan_list_entry channel_list[]; } __packed; struct wmi_bssid_list { __le32 tag; /* WMI_BSSID_LIST_TAG */ __le32 num_bssid; struct wmi_mac_addr bssid_list[]; } __packed; struct wmi_ie_data { __le32 tag; /* WMI_IE_TAG */ __le32 ie_len; u8 ie_data[]; } __packed; struct wmi_ssid { __le32 ssid_len; u8 ssid[32]; } __packed; struct wmi_ssid_list { __le32 tag; /* WMI_SSID_LIST_TAG */ __le32 num_ssids; struct wmi_ssid ssids[]; } __packed; /* prefix used by scan requestor ids on the host */ #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 /* prefix used by scan request ids generated on the host */ /* host cycles through the lower 12 bits to generate ids */ #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 #define WLAN_SCAN_PARAMS_MAX_SSID 16 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 /* Values lower than this may be refused by some firmware revisions with a scan * completion with a timedout reason. */ #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 /* Scan priority numbers must be sequential, starting with 0 */ enum wmi_scan_priority { WMI_SCAN_PRIORITY_VERY_LOW = 0, WMI_SCAN_PRIORITY_LOW, WMI_SCAN_PRIORITY_MEDIUM, WMI_SCAN_PRIORITY_HIGH, WMI_SCAN_PRIORITY_VERY_HIGH, WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ }; struct wmi_start_scan_common { /* Scan ID */ __le32 scan_id; /* Scan requestor ID */ __le32 scan_req_id; /* VDEV id(interface) that is requesting scan */ __le32 vdev_id; /* Scan Priority, input to scan scheduler */ __le32 scan_priority; /* Scan events subscription */ __le32 notify_scan_events; /* dwell time in msec on active channels */ __le32 dwell_time_active; /* dwell time in msec on passive channels */ __le32 dwell_time_passive; /* * min time in msec on the BSS channel,only valid if atleast one * VDEV is active */ __le32 min_rest_time; /* * max rest time in msec on the BSS channel,only valid if at least * one VDEV is active */ /* * the scanner will rest on the bss channel at least min_rest_time * after min_rest_time the scanner will start checking for tx/rx * activity on all VDEVs. if there is no activity the scanner will * switch to off channel. if there is activity the scanner will let * the radio on the bss channel until max_rest_time expires.at * max_rest_time scanner will switch to off channel irrespective of * activity. activity is determined by the idle_time parameter. */ __le32 max_rest_time; /* * time before sending next set of probe requests. * The scanner keeps repeating probe requests transmission with * period specified by repeat_probe_time. * The number of probe requests specified depends on the ssid_list * and bssid_list */ __le32 repeat_probe_time; /* time in msec between 2 consequetive probe requests with in a set. */ __le32 probe_spacing_time; /* * data inactivity time in msec on bss channel that will be used by * scanner for measuring the inactivity. */ __le32 idle_time; /* maximum time in msec allowed for scan */ __le32 max_scan_time; /* * delay in msec before sending first probe request after switching * to a channel */ __le32 probe_delay; /* Scan control flags */ __le32 scan_ctrl_flags; } __packed; struct wmi_start_scan_tlvs { /* TLV parameters. These includes channel list, ssid list, bssid list, * extra ies. */ u8 tlvs[0]; } __packed; struct wmi_start_scan_cmd { struct wmi_start_scan_common common; __le32 burst_duration_ms; struct wmi_start_scan_tlvs tlvs; } __packed; /* This is the definition from 10.X firmware branch */ struct wmi_10x_start_scan_cmd { struct wmi_start_scan_common common; struct wmi_start_scan_tlvs tlvs; } __packed; struct wmi_ssid_arg { int len; const u8 *ssid; }; struct wmi_bssid_arg { const u8 *bssid; }; struct wmi_start_scan_arg { u32 scan_id; u32 scan_req_id; u32 vdev_id; u32 scan_priority; u32 notify_scan_events; u32 dwell_time_active; u32 dwell_time_passive; u32 min_rest_time; u32 max_rest_time; u32 repeat_probe_time; u32 probe_spacing_time; u32 idle_time; u32 max_scan_time; u32 probe_delay; u32 scan_ctrl_flags; u32 burst_duration_ms; u32 ie_len; u32 n_channels; u32 n_ssids; u32 n_bssids; u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; u16 channels[64]; struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; struct wmi_mac_addr mac_addr; struct wmi_mac_addr mac_mask; }; /* scan control flags */ /* passively scan all channels including active channels */ #define WMI_SCAN_FLAG_PASSIVE 0x1 /* add wild card ssid probe request even though ssid_list is specified. */ #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 /* add cck rates to rates/xrate ie for the generated probe request */ #define WMI_SCAN_ADD_CCK_RATES 0x4 /* add ofdm rates to rates/xrate ie for the generated probe request */ #define WMI_SCAN_ADD_OFDM_RATES 0x8 /* To enable indication of Chan load and Noise floor to host */ #define WMI_SCAN_CHAN_STAT_EVENT 0x10 /* Filter Probe request frames */ #define WMI_SCAN_FILTER_PROBE_REQ 0x20 /* When set, DFS channels will not be scanned */ #define WMI_SCAN_BYPASS_DFS_CHN 0x40 /* Different FW scan engine may choose to bail out on errors. * Allow the driver to have influence over that. */ #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 /* Use random MAC address for TA for Probe Request frame and add * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame. * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored. */ #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ #define WMI_SCAN_CLASS_MASK 0xFF000000 enum wmi_stop_scan_type { WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ }; struct wmi_stop_scan_cmd { __le32 scan_req_id; __le32 scan_id; __le32 req_type; __le32 vdev_id; } __packed; struct wmi_stop_scan_arg { u32 req_id; enum wmi_stop_scan_type req_type; union { u32 scan_id; u32 vdev_id; } u; }; struct wmi_scan_chan_list_cmd { __le32 num_scan_chans; struct wmi_channel chan_info[]; } __packed; struct wmi_scan_chan_list_arg { u32 n_channels; struct wmi_channel_arg *channels; }; enum wmi_bss_filter { WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ WMI_BSS_FILTER_ALL, /* all beacons forwarded */ WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ WMI_BSS_FILTER_LAST_BSS, /* marker only */ }; enum wmi_scan_event_type { WMI_SCAN_EVENT_STARTED = BIT(0), WMI_SCAN_EVENT_COMPLETED = BIT(1), WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), WMI_SCAN_EVENT_DEQUEUED = BIT(4), /* possibly by high-prio scan */ WMI_SCAN_EVENT_PREEMPTED = BIT(5), WMI_SCAN_EVENT_START_FAILED = BIT(6), WMI_SCAN_EVENT_RESTARTED = BIT(7), WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), WMI_SCAN_EVENT_MAX = BIT(15), }; enum wmi_scan_completion_reason { WMI_SCAN_REASON_COMPLETED, WMI_SCAN_REASON_CANCELLED, WMI_SCAN_REASON_PREEMPTED, WMI_SCAN_REASON_TIMEDOUT, WMI_SCAN_REASON_INTERNAL_FAILURE, WMI_SCAN_REASON_MAX, }; struct wmi_scan_event { __le32 event_type; /* %WMI_SCAN_EVENT_ */ __le32 reason; /* %WMI_SCAN_REASON_ */ __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ __le32 scan_req_id; __le32 scan_id; __le32 vdev_id; } __packed; /* * This defines how much headroom is kept in the * receive frame between the descriptor and the * payload, in order for the WMI PHY error and * management handler to insert header contents. * * This is in bytes. */ #define WMI_MGMT_RX_HDR_HEADROOM 52 /* * This event will be used for sending scan results * as well as rx mgmt frames to the host. The rx buffer * will be sent as part of this WMI event. It would be a * good idea to pass all the fields in the RX status * descriptor up to the host. */ struct wmi_mgmt_rx_hdr_v1 { __le32 channel; __le32 snr; __le32 rate; __le32 phy_mode; __le32 buf_len; __le32 status; /* %WMI_RX_STATUS_ */ } __packed; struct wmi_mgmt_rx_hdr_v2 { struct wmi_mgmt_rx_hdr_v1 v1; __le32 rssi_ctl[4]; } __packed; struct wmi_mgmt_rx_event_v1 { struct wmi_mgmt_rx_hdr_v1 hdr; u8 buf[]; } __packed; struct wmi_mgmt_rx_event_v2 { struct wmi_mgmt_rx_hdr_v2 hdr; u8 buf[]; } __packed; struct wmi_10_4_mgmt_rx_hdr { __le32 channel; __le32 snr; u8 rssi_ctl[4]; __le32 rate; __le32 phy_mode; __le32 buf_len; __le32 status; } __packed; struct wmi_10_4_mgmt_rx_event { struct wmi_10_4_mgmt_rx_hdr hdr; u8 buf[]; } __packed; struct wmi_mgmt_rx_ext_info { __le64 rx_mac_timestamp; } __packed __aligned(4); #define WMI_RX_STATUS_OK 0x00 #define WMI_RX_STATUS_ERR_CRC 0x01 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 #define WMI_RX_STATUS_ERR_MIC 0x10 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 /* Extension data at the end of mgmt frame */ #define WMI_RX_STATUS_EXT_INFO 0x40 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 #define PHY_ERROR_GEN_RADAR 0x05 #define PHY_ERROR_10_4_RADAR_MASK 0x4 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 enum phy_err_type { PHY_ERROR_UNKNOWN, PHY_ERROR_SPECTRAL_SCAN, PHY_ERROR_FALSE_RADAR_EXT, PHY_ERROR_RADAR }; struct wmi_phyerr { __le32 tsf_timestamp; __le16 freq1; __le16 freq2; u8 rssi_combined; u8 chan_width_mhz; u8 phy_err_code; u8 rsvd0; __le32 rssi_chains[4]; __le16 nf_chains[4]; __le32 buf_len; u8 buf[]; } __packed; struct wmi_phyerr_event { __le32 num_phyerrs; __le32 tsf_l32; __le32 tsf_u32; struct wmi_phyerr phyerrs[]; } __packed; struct wmi_10_4_phyerr_event { __le32 tsf_l32; __le32 tsf_u32; __le16 freq1; __le16 freq2; u8 rssi_combined; u8 chan_width_mhz; u8 phy_err_code; u8 rsvd0; __le32 rssi_chains[4]; __le16 nf_chains[4]; __le32 phy_err_mask[2]; __le32 tsf_timestamp; __le32 buf_len; u8 buf[]; } __packed; struct wmi_radar_found_info { __le32 pri_min; __le32 pri_max; __le32 width_min; __le32 width_max; __le32 sidx_min; __le32 sidx_max; } __packed; enum wmi_radar_confirmation_status { /* Detected radar was due to SW pulses */ WMI_SW_RADAR_DETECTED = 0, WMI_RADAR_DETECTION_FAIL = 1, /* Real radar detected */ WMI_HW_RADAR_DETECTED = 2, }; #define PHYERR_TLV_SIG 0xBB #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 struct phyerr_radar_report { __le32 reg0; /* RADAR_REPORT_REG0_* */ __le32 reg1; /* RADAR_REPORT_REG1_* */ } __packed; #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 struct phyerr_fft_report { __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ } __packed; #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 struct phyerr_tlv { __le16 len; u8 tag; u8 sig; } __packed; #define DFS_RSSI_POSSIBLY_FALSE 50 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 struct wmi_mgmt_tx_hdr { __le32 vdev_id; struct wmi_mac_addr peer_macaddr; __le32 tx_rate; __le32 tx_power; __le32 buf_len; } __packed; struct wmi_mgmt_tx_cmd { struct wmi_mgmt_tx_hdr hdr; u8 buf[]; } __packed; struct wmi_echo_event { __le32 value; } __packed; struct wmi_echo_cmd { __le32 value; } __packed; struct wmi_pdev_set_regdomain_cmd { __le32 reg_domain; __le32 reg_domain_2G; __le32 reg_domain_5G; __le32 conformance_test_limit_2G; __le32 conformance_test_limit_5G; } __packed; enum wmi_dfs_region { /* Uninitialized dfs domain */ WMI_UNINIT_DFS_DOMAIN = 0, /* FCC3 dfs domain */ WMI_FCC_DFS_DOMAIN = 1, /* ETSI dfs domain */ WMI_ETSI_DFS_DOMAIN = 2, /*Japan dfs domain */ WMI_MKK4_DFS_DOMAIN = 3, }; struct wmi_pdev_set_regdomain_cmd_10x { __le32 reg_domain; __le32 reg_domain_2G; __le32 reg_domain_5G; __le32 conformance_test_limit_2G; __le32 conformance_test_limit_5G; /* dfs domain from wmi_dfs_region */ __le32 dfs_domain; } __packed; /* Command to set/unset chip in quiet mode */ struct wmi_pdev_set_quiet_cmd { /* period in TUs */ __le32 period; /* duration in TUs */ __le32 duration; /* offset in TUs */ __le32 next_start; /* enable/disable */ __le32 enabled; } __packed; /* * 802.11g protection mode. */ enum ath10k_protmode { ATH10K_PROT_NONE = 0, /* no protection */ ATH10K_PROT_CTSONLY = 1, /* CTS to self */ ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ }; enum wmi_rtscts_profile { WMI_RTSCTS_FOR_NO_RATESERIES = 0, WMI_RTSCTS_FOR_SECOND_RATESERIES, WMI_RTSCTS_ACROSS_SW_RETRIES }; #define WMI_RTSCTS_ENABLED 1 #define WMI_RTSCTS_SET_MASK 0x0f #define WMI_RTSCTS_SET_LSB 0 #define WMI_RTSCTS_PROFILE_MASK 0xf0 #define WMI_RTSCTS_PROFILE_LSB 4 enum wmi_beacon_gen_mode { WMI_BEACON_STAGGERED_MODE = 0, WMI_BEACON_BURST_MODE = 1 }; enum wmi_csa_event_ies_present_flag { WMI_CSA_IE_PRESENT = 0x00000001, WMI_XCSA_IE_PRESENT = 0x00000002, WMI_WBW_IE_PRESENT = 0x00000004, WMI_CSWARP_IE_PRESENT = 0x00000008, }; /* wmi CSA receive event from beacon frame */ struct wmi_csa_event { __le32 i_fc_dur; /* Bit 0-15: FC */ /* Bit 16-31: DUR */ struct wmi_mac_addr i_addr1; struct wmi_mac_addr i_addr2; __le32 csa_ie[2]; __le32 xcsa_ie[2]; __le32 wb_ie[2]; __le32 cswarp_ie; __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ } __packed; /* the definition of different PDEV parameters */ #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 struct wmi_pdev_param_map { u32 tx_chain_mask; u32 rx_chain_mask; u32 txpower_limit2g; u32 txpower_limit5g; u32 txpower_scale; u32 beacon_gen_mode; u32 beacon_tx_mode; u32 resmgr_offchan_mode; u32 protection_mode; u32 dynamic_bw; u32 non_agg_sw_retry_th; u32 agg_sw_retry_th; u32 sta_kickout_th; u32 ac_aggrsize_scaling; u32 ltr_enable; u32 ltr_ac_latency_be; u32 ltr_ac_latency_bk; u32 ltr_ac_latency_vi; u32 ltr_ac_latency_vo; u32 ltr_ac_latency_timeout; u32 ltr_sleep_override; u32 ltr_rx_override; u32 ltr_tx_activity_timeout; u32 l1ss_enable; u32 dsleep_enable; u32 pcielp_txbuf_flush; u32 pcielp_txbuf_watermark; u32 pcielp_txbuf_tmo_en; u32 pcielp_txbuf_tmo_value; u32 pdev_stats_update_period; u32 vdev_stats_update_period; u32 peer_stats_update_period; u32 bcnflt_stats_update_period; u32 pmf_qos; u32 arp_ac_override; u32 dcs; u32 ani_enable; u32 ani_poll_period; u32 ani_listen_period; u32 ani_ofdm_level; u32 ani_cck_level; u32 dyntxchain; u32 proxy_sta; u32 idle_ps_config; u32 power_gating_sleep; u32 fast_channel_reset; u32 burst_dur; u32 burst_enable; u32 cal_period; u32 aggr_burst; u32 rx_decap_mode; u32 smart_antenna_default_antenna; u32 igmpmld_override; u32 igmpmld_tid; u32 antenna_gain; u32 rx_filter; u32 set_mcast_to_ucast_tid; u32 proxy_sta_mode; u32 set_mcast2ucast_mode; u32 set_mcast2ucast_buffer; u32 remove_mcast2ucast_buffer; u32 peer_sta_ps_statechg_enable; u32 igmpmld_ac_override; u32 block_interbss; u32 set_disable_reset_cmdid; u32 set_msdu_ttl_cmdid; u32 set_ppdu_duration_cmdid; u32 txbf_sound_period_cmdid; u32 set_promisc_mode_cmdid; u32 set_burst_mode_cmdid; u32 en_stats; u32 mu_group_policy; u32 noise_detection; u32 noise_threshold; u32 dpd_enable; u32 set_mcast_bcast_echo; u32 atf_strict_sch; u32 atf_sched_duration; u32 ant_plzn; u32 mgmt_retry_limit; u32 sensitivity_level; u32 signed_txpower_2g; u32 signed_txpower_5g; u32 enable_per_tid_amsdu; u32 enable_per_tid_ampdu; u32 cca_threshold; u32 rts_fixed_rate; u32 pdev_reset; u32 wapi_mbssid_offset; u32 arp_srcaddr; u32 arp_dstaddr; u32 enable_btcoex; u32 rfkill_config; u32 rfkill_enable; u32 peer_stats_info_enable; }; #define WMI_PDEV_PARAM_UNSUPPORTED 0 enum wmi_pdev_param { /* TX chain mask */ WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, /* RX chain mask */ WMI_PDEV_PARAM_RX_CHAIN_MASK, /* TX power limit for 2G Radio */ WMI_PDEV_PARAM_TXPOWER_LIMIT2G, /* TX power limit for 5G Radio */ WMI_PDEV_PARAM_TXPOWER_LIMIT5G, /* TX power scale */ WMI_PDEV_PARAM_TXPOWER_SCALE, /* Beacon generation mode . 0: host, 1: target */ WMI_PDEV_PARAM_BEACON_GEN_MODE, /* Beacon generation mode . 0: staggered 1: bursted */ WMI_PDEV_PARAM_BEACON_TX_MODE, /* * Resource manager off chan mode . * 0: turn off off chan mode. 1: turn on offchan mode */ WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, /* * Protection mode: * 0: no protection 1:use CTS-to-self 2: use RTS/CTS */ WMI_PDEV_PARAM_PROTECTION_MODE, /* * Dynamic bandwidth - 0: disable, 1: enable * * When enabled HW rate control tries different bandwidths when * retransmitting frames. */ WMI_PDEV_PARAM_DYNAMIC_BW, /* Non aggregrate/ 11g sw retry threshold.0-disable */ WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, /* aggregrate sw retry threshold. 0-disable*/ WMI_PDEV_PARAM_AGG_SW_RETRY_TH, /* Station kickout threshold (non of consecutive failures).0-disable */ WMI_PDEV_PARAM_STA_KICKOUT_TH, /* Aggerate size scaling configuration per AC */ WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, /* LTR enable */ WMI_PDEV_PARAM_LTR_ENABLE, /* LTR latency for BE, in us */ WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, /* LTR latency for BK, in us */ WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, /* LTR latency for VI, in us */ WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, /* LTR latency for VO, in us */ WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, /* LTR AC latency timeout, in ms */ WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, /* LTR platform latency override, in us */ WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, /* LTR-RX override, in us */ WMI_PDEV_PARAM_LTR_RX_OVERRIDE, /* Tx activity timeout for LTR, in us */ WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, /* L1SS state machine enable */ WMI_PDEV_PARAM_L1SS_ENABLE, /* Deep sleep state machine enable */ WMI_PDEV_PARAM_DSLEEP_ENABLE, /* RX buffering flush enable */ WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, /* RX buffering matermark */ WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, /* RX buffering timeout enable */ WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, /* RX buffering timeout value */ WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, /* pdev level stats update period in ms */ WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, /* vdev level stats update period in ms */ WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, /* peer level stats update period in ms */ WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, /* beacon filter status update period */ WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ WMI_PDEV_PARAM_PMF_QOS, /* Access category on which ARP frames are sent */ WMI_PDEV_PARAM_ARP_AC_OVERRIDE, /* DCS configuration */ WMI_PDEV_PARAM_DCS, /* Enable/Disable ANI on target */ WMI_PDEV_PARAM_ANI_ENABLE, /* configure the ANI polling period */ WMI_PDEV_PARAM_ANI_POLL_PERIOD, /* configure the ANI listening period */ WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, /* configure OFDM immunity level */ WMI_PDEV_PARAM_ANI_OFDM_LEVEL, /* configure CCK immunity level */ WMI_PDEV_PARAM_ANI_CCK_LEVEL, /* Enable/Disable CDD for 1x1 STAs in rate control module */ WMI_PDEV_PARAM_DYNTXCHAIN, /* Enable/Disable proxy STA */ WMI_PDEV_PARAM_PROXY_STA, /* Enable/Disable low power state when all VDEVs are inactive/idle. */ WMI_PDEV_PARAM_IDLE_PS_CONFIG, /* Enable/Disable power gating sleep */ WMI_PDEV_PARAM_POWER_GATING_SLEEP, }; enum wmi_10x_pdev_param { /* TX chian mask */ WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, /* RX chian mask */ WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, /* TX power limit for 2G Radio */ WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, /* TX power limit for 5G Radio */ WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, /* TX power scale */ WMI_10X_PDEV_PARAM_TXPOWER_SCALE, /* Beacon generation mode . 0: host, 1: target */ WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, /* Beacon generation mode . 0: staggered 1: bursted */ WMI_10X_PDEV_PARAM_BEACON_TX_MODE, /* * Resource manager off chan mode . * 0: turn off off chan mode. 1: turn on offchan mode */ WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, /* * Protection mode: * 0: no protection 1:use CTS-to-self 2: use RTS/CTS */ WMI_10X_PDEV_PARAM_PROTECTION_MODE, /* Dynamic bandwidth 0: disable 1: enable */ WMI_10X_PDEV_PARAM_DYNAMIC_BW, /* Non aggregrate/ 11g sw retry threshold.0-disable */ WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, /* aggregrate sw retry threshold. 0-disable*/ WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, /* Station kickout threshold (non of consecutive failures).0-disable */ WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, /* Aggerate size scaling configuration per AC */ WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, /* LTR enable */ WMI_10X_PDEV_PARAM_LTR_ENABLE, /* LTR latency for BE, in us */ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, /* LTR latency for BK, in us */ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, /* LTR latency for VI, in us */ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, /* LTR latency for VO, in us */ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, /* LTR AC latency timeout, in ms */ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, /* LTR platform latency override, in us */ WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, /* LTR-RX override, in us */ WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, /* Tx activity timeout for LTR, in us */ WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, /* L1SS state machine enable */ WMI_10X_PDEV_PARAM_L1SS_ENABLE, /* Deep sleep state machine enable */ WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, /* pdev level stats update period in ms */ WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, /* vdev level stats update period in ms */ WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, /* peer level stats update period in ms */ WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, /* beacon filter status update period */ WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ WMI_10X_PDEV_PARAM_PMF_QOS, /* Access category on which ARP and DHCP frames are sent */ WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, /* DCS configuration */ WMI_10X_PDEV_PARAM_DCS, /* Enable/Disable ANI on target */ WMI_10X_PDEV_PARAM_ANI_ENABLE, /* configure the ANI polling period */ WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, /* configure the ANI listening period */ WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, /* configure OFDM immunity level */ WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, /* configure CCK immunity level */ WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, /* Enable/Disable CDD for 1x1 STAs in rate control module */ WMI_10X_PDEV_PARAM_DYNTXCHAIN, /* Enable/Disable Fast channel reset*/ WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, /* Set Bursting DUR */ WMI_10X_PDEV_PARAM_BURST_DUR, /* Set Bursting Enable*/ WMI_10X_PDEV_PARAM_BURST_ENABLE, /* following are available as of firmware 10.2 */ WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, WMI_10X_PDEV_PARAM_IGMPMLD_TID, WMI_10X_PDEV_PARAM_ANTENNA_GAIN, WMI_10X_PDEV_PARAM_RX_DECAP_MODE, WMI_10X_PDEV_PARAM_RX_FILTER, WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, WMI_10X_PDEV_PARAM_PROXY_STA_MODE, WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, WMI_10X_PDEV_PARAM_CAL_PERIOD, WMI_10X_PDEV_PARAM_ATF_STRICT_SCH, WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION, WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID, WMI_10X_PDEV_PARAM_PDEV_RESET }; enum wmi_10_4_pdev_param { WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, WMI_10_4_PDEV_PARAM_PROTECTION_MODE, WMI_10_4_PDEV_PARAM_DYNAMIC_BW, WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, WMI_10_4_PDEV_PARAM_LTR_ENABLE, WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, WMI_10_4_PDEV_PARAM_L1SS_ENABLE, WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, WMI_10_4_PDEV_PARAM_PMF_QOS, WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, WMI_10_4_PDEV_PARAM_DCS, WMI_10_4_PDEV_PARAM_ANI_ENABLE, WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, WMI_10_4_PDEV_PARAM_DYNTXCHAIN, WMI_10_4_PDEV_PARAM_PROXY_STA, WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, WMI_10_4_PDEV_PARAM_AGGR_BURST, WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, WMI_10_4_PDEV_PARAM_BURST_DUR, WMI_10_4_PDEV_PARAM_BURST_ENABLE, WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, WMI_10_4_PDEV_PARAM_IGMPMLD_TID, WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, WMI_10_4_PDEV_PARAM_RX_FILTER, WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, WMI_10_4_PDEV_PARAM_EN_STATS, WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, WMI_10_4_PDEV_PARAM_NOISE_DETECTION, WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, WMI_10_4_PDEV_PARAM_DPD_ENABLE, WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, WMI_10_4_PDEV_PARAM_ANT_PLZN, WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, WMI_10_4_PDEV_PARAM_CAL_PERIOD, WMI_10_4_PDEV_PARAM_PDEV_RESET, WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, WMI_10_4_PDEV_PARAM_ARP_SRCADDR, WMI_10_4_PDEV_PARAM_ARP_DSTADDR, WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, WMI_10_4_PDEV_PARAM_RX_BATCHMODE, WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, }; struct wmi_pdev_set_param_cmd { __le32 param_id; __le32 param_value; } __packed; struct wmi_pdev_set_base_macaddr_cmd { struct wmi_mac_addr mac_addr; } __packed; /* valid period is 1 ~ 60000ms, unit in millisecond */ #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 struct wmi_pdev_get_tpc_config_cmd { /* parameter */ __le32 param; } __packed; #define WMI_TPC_CONFIG_PARAM 1 #define WMI_TPC_FINAL_RATE_MAX 240 #define WMI_TPC_TX_N_CHAIN 4 #define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65) #define WMI_TPC_PREAM_TABLE_MAX 10 #define WMI_TPC_FLAG 3 #define WMI_TPC_BUF_SIZE 10 #define WMI_TPC_BEAMFORMING 2 enum wmi_tpc_table_type { WMI_TPC_TABLE_TYPE_CDD = 0, WMI_TPC_TABLE_TYPE_STBC = 1, WMI_TPC_TABLE_TYPE_TXBF = 2, }; enum wmi_tpc_config_event_flag { WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, }; struct wmi_pdev_tpc_config_event { __le32 reg_domain; __le32 chan_freq; __le32 phy_mode; __le32 twice_antenna_reduction; __le32 twice_max_rd_power; a_sle32 twice_antenna_gain; __le32 power_limit; __le32 rate_max; __le32 num_tx_chain; __le32 ctl; __le32 flags; s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; u8 rates_array[WMI_TPC_RATE_MAX]; } __packed; /* Transmit power scale factor. */ enum wmi_tp_scale { WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ WMI_TP_SCALE_MIN = 4, /* min, but still on */ WMI_TP_SCALE_SIZE = 5, /* max num of enum */ }; struct wmi_pdev_tpc_final_table_event { __le32 reg_domain; __le32 chan_freq; __le32 phy_mode; __le32 twice_antenna_reduction; __le32 twice_max_rd_power; a_sle32 twice_antenna_gain; __le32 power_limit; __le32 rate_max; __le32 num_tx_chain; __le32 ctl; __le32 flags; s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; u8 rates_array[WMI_TPC_FINAL_RATE_MAX]; u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN] [WMI_TPC_TX_N_CHAIN]; } __packed; struct wmi_pdev_get_tpc_table_cmd { __le32 param; } __packed; enum wmi_tpc_pream_2ghz { WMI_TPC_PREAM_2GHZ_CCK = 0, WMI_TPC_PREAM_2GHZ_OFDM, WMI_TPC_PREAM_2GHZ_HT20, WMI_TPC_PREAM_2GHZ_HT40, WMI_TPC_PREAM_2GHZ_VHT20, WMI_TPC_PREAM_2GHZ_VHT40, WMI_TPC_PREAM_2GHZ_VHT80, }; enum wmi_tpc_pream_5ghz { WMI_TPC_PREAM_5GHZ_OFDM = 1, WMI_TPC_PREAM_5GHZ_HT20, WMI_TPC_PREAM_5GHZ_HT40, WMI_TPC_PREAM_5GHZ_VHT20, WMI_TPC_PREAM_5GHZ_VHT40, WMI_TPC_PREAM_5GHZ_VHT80, WMI_TPC_PREAM_5GHZ_HTCUP, }; #define WMI_PEER_PS_STATE_DISABLED 2 struct wmi_peer_sta_ps_state_chg_event { struct wmi_mac_addr peer_macaddr; __le32 peer_ps_state; } __packed; struct wmi_pdev_chanlist_update_event { /* number of channels */ __le32 num_chan; /* array of channels */ struct wmi_channel channel_list[1]; } __packed; #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) struct wmi_debug_mesg_event { /* message buffer, NULL terminated */ char bufp[WMI_MAX_DEBUG_MESG]; } __packed; enum { /* P2P device */ VDEV_SUBTYPE_P2PDEV = 0, /* P2P client */ VDEV_SUBTYPE_P2PCLI, /* P2P GO */ VDEV_SUBTYPE_P2PGO, /* BT3.0 HS */ VDEV_SUBTYPE_BT, }; struct wmi_pdev_set_channel_cmd { /* idnore power , only use flags , mode and freq */ struct wmi_channel chan; } __packed; struct wmi_pdev_pktlog_enable_cmd { __le32 ev_bitmap; } __packed; /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ #define WMI_DSCP_MAP_MAX (64) struct wmi_pdev_set_dscp_tid_map_cmd { /* map indicating DSCP to TID conversion */ __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; } __packed; enum mcast_bcast_rate_id { WMI_SET_MCAST_RATE, WMI_SET_BCAST_RATE }; struct mcast_bcast_rate { enum mcast_bcast_rate_id rate_id; __le32 rate; } __packed; struct wmi_wmm_params { __le32 cwmin; __le32 cwmax; __le32 aifs; __le32 txop; __le32 acm; __le32 no_ack; } __packed; struct wmi_pdev_set_wmm_params { struct wmi_wmm_params ac_be; struct wmi_wmm_params ac_bk; struct wmi_wmm_params ac_vi; struct wmi_wmm_params ac_vo; } __packed; struct wmi_wmm_params_arg { u32 cwmin; u32 cwmax; u32 aifs; u32 txop; u32 acm; u32 no_ack; }; struct wmi_wmm_params_all_arg { struct wmi_wmm_params_arg ac_be; struct wmi_wmm_params_arg ac_bk; struct wmi_wmm_params_arg ac_vi; struct wmi_wmm_params_arg ac_vo; }; struct wmi_pdev_stats_tx { /* Num HTT cookies queued to dispatch list */ __le32 comp_queued; /* Num HTT cookies dispatched */ __le32 comp_delivered; /* Num MSDU queued to WAL */ __le32 msdu_enqued; /* Num MPDU queue to WAL */ __le32 mpdu_enqued; /* Num MSDUs dropped by WMM limit */ __le32 wmm_drop; /* Num Local frames queued */ __le32 local_enqued; /* Num Local frames done */ __le32 local_freed; /* Num queued to HW */ __le32 hw_queued; /* Num PPDU reaped from HW */ __le32 hw_reaped; /* Num underruns */ __le32 underrun; /* Num PPDUs cleaned up in TX abort */ __le32 tx_abort; /* Num MPDUs requed by SW */ __le32 mpdus_requed; /* excessive retries */ __le32 tx_ko; /* data hw rate code */ __le32 data_rc; /* Scheduler self triggers */ __le32 self_triggers; /* frames dropped due to excessive sw retries */ __le32 sw_retry_failure; /* illegal rate phy errors */ __le32 illgl_rate_phy_err; /* wal pdev continuous xretry */ __le32 pdev_cont_xretry; /* wal pdev continous xretry */ __le32 pdev_tx_timeout; /* wal pdev resets */ __le32 pdev_resets; /* frames dropped due to non-availability of stateless TIDs */ __le32 stateless_tid_alloc_failure; __le32 phy_underrun; /* MPDU is more than txop limit */ __le32 txop_ovf; } __packed; struct wmi_10_4_pdev_stats_tx { /* Num HTT cookies queued to dispatch list */ __le32 comp_queued; /* Num HTT cookies dispatched */ __le32 comp_delivered; /* Num MSDU queued to WAL */ __le32 msdu_enqued; /* Num MPDU queue to WAL */ __le32 mpdu_enqued; /* Num MSDUs dropped by WMM limit */ __le32 wmm_drop; /* Num Local frames queued */ __le32 local_enqued; /* Num Local frames done */ __le32 local_freed; /* Num queued to HW */ __le32 hw_queued; /* Num PPDU reaped from HW */ __le32 hw_reaped; /* Num underruns */ __le32 underrun; /* HW Paused. */ __le32 hw_paused; /* Num PPDUs cleaned up in TX abort */ __le32 tx_abort; /* Num MPDUs requed by SW */ __le32 mpdus_requed; /* excessive retries */ __le32 tx_ko; /* data hw rate code */ __le32 data_rc; /* Scheduler self triggers */ __le32 self_triggers; /* frames dropped due to excessive sw retries */ __le32 sw_retry_failure; /* illegal rate phy errors */ __le32 illgl_rate_phy_err; /* wal pdev continuous xretry */ __le32 pdev_cont_xretry; /* wal pdev tx timeouts */ __le32 pdev_tx_timeout; /* wal pdev resets */ __le32 pdev_resets; /* frames dropped due to non-availability of stateless TIDs */ __le32 stateless_tid_alloc_failure; __le32 phy_underrun; /* MPDU is more than txop limit */ __le32 txop_ovf; /* Number of Sequences posted */ __le32 seq_posted; /* Number of Sequences failed queueing */ __le32 seq_failed_queueing; /* Number of Sequences completed */ __le32 seq_completed; /* Number of Sequences restarted */ __le32 seq_restarted; /* Number of MU Sequences posted */ __le32 mu_seq_posted; /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ __le32 mpdus_sw_flush; /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ __le32 mpdus_hw_filter; /* Num MPDUs truncated by PDG * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) */ __le32 mpdus_truncated; /* Num MPDUs that was tried but didn't receive ACK or BA */ __le32 mpdus_ack_failed; /* Num MPDUs that was dropped due to expiry. */ __le32 mpdus_expired; } __packed; struct wmi_pdev_stats_rx { /* Cnts any change in ring routing mid-ppdu */ __le32 mid_ppdu_route_change; /* Total number of statuses processed */ __le32 status_rcvd; /* Extra frags on rings 0-3 */ __le32 r0_frags; __le32 r1_frags; __le32 r2_frags; __le32 r3_frags; /* MSDUs / MPDUs delivered to HTT */ __le32 htt_msdus; __le32 htt_mpdus; /* MSDUs / MPDUs delivered to local stack */ __le32 loc_msdus; __le32 loc_mpdus; /* AMSDUs that have more MSDUs than the status ring size */ __le32 oversize_amsdu; /* Number of PHY errors */ __le32 phy_errs; /* Number of PHY errors drops */ __le32 phy_err_drop; /* Number of mpdu errors - FCS, MIC, ENC etc. */ __le32 mpdu_errs; } __packed; struct wmi_pdev_stats_peer { /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ __le32 dummy; } __packed; enum wmi_stats_id { WMI_STAT_PEER = BIT(0), WMI_STAT_AP = BIT(1), WMI_STAT_PDEV = BIT(2), WMI_STAT_VDEV = BIT(3), WMI_STAT_BCNFLT = BIT(4), WMI_STAT_VDEV_RATE = BIT(5), }; enum wmi_10_4_stats_id { WMI_10_4_STAT_PEER = BIT(0), WMI_10_4_STAT_AP = BIT(1), WMI_10_4_STAT_INST = BIT(2), WMI_10_4_STAT_PEER_EXTD = BIT(3), WMI_10_4_STAT_VDEV_EXTD = BIT(4), }; enum wmi_tlv_stats_id { WMI_TLV_STAT_PEER = BIT(0), WMI_TLV_STAT_AP = BIT(1), WMI_TLV_STAT_PDEV = BIT(2), WMI_TLV_STAT_VDEV = BIT(3), WMI_TLV_STAT_PEER_EXTD = BIT(10), }; struct wlan_inst_rssi_args { __le16 cfg_retry_count; __le16 retry_count; }; struct wmi_request_stats_cmd { __le32 stats_id; __le32 vdev_id; /* peer MAC address */ struct wmi_mac_addr peer_macaddr; /* Instantaneous RSSI arguments */ struct wlan_inst_rssi_args inst_rssi_args; } __packed; enum wmi_peer_stats_info_request_type { /* request stats of one specified peer */ WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01, /* request stats of all peers belong to specified VDEV */ WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02, }; /* Suspend option */ enum { /* suspend */ WMI_PDEV_SUSPEND, /* suspend and disable all interrupts */ WMI_PDEV_SUSPEND_AND_DISABLE_INTR, }; struct wmi_pdev_suspend_cmd { /* suspend option sent to target */ __le32 suspend_opt; } __packed; struct wmi_stats_event { __le32 stats_id; /* WMI_STAT_ */ /* * number of pdev stats event structures * (wmi_pdev_stats) 0 or 1 */ __le32 num_pdev_stats; /* * number of vdev stats event structures * (wmi_vdev_stats) 0 or max vdevs */ __le32 num_vdev_stats; /* * number of peer stats event structures * (wmi_peer_stats) 0 or max peers */ __le32 num_peer_stats; __le32 num_bcnflt_stats; /* * followed by * num_pdev_stats * size of(struct wmi_pdev_stats) * num_vdev_stats * size of(struct wmi_vdev_stats) * num_peer_stats * size of(struct wmi_peer_stats) * * By having a zero sized array, the pointer to data area * becomes available without increasing the struct size */ u8 data[]; } __packed; struct wmi_10_2_stats_event { __le32 stats_id; /* %WMI_REQUEST_ */ __le32 num_pdev_stats; __le32 num_pdev_ext_stats; __le32 num_vdev_stats; __le32 num_peer_stats; __le32 num_bcnflt_stats; u8 data[]; } __packed; /* * PDEV statistics * TODO: add all PDEV stats here */ struct wmi_pdev_stats_base { __le32 chan_nf; __le32 tx_frame_count; /* Cycles spent transmitting frames */ __le32 rx_frame_count; /* Cycles spent receiving frames */ __le32 rx_clear_count; /* Total channel busy time, evidently */ __le32 cycle_count; /* Total on-channel time */ __le32 phy_err_count; __le32 chan_tx_pwr; } __packed; struct wmi_pdev_stats { struct wmi_pdev_stats_base base; struct wmi_pdev_stats_tx tx; struct wmi_pdev_stats_rx rx; struct wmi_pdev_stats_peer peer; } __packed; struct wmi_pdev_stats_extra { __le32 ack_rx_bad; __le32 rts_bad; __le32 rts_good; __le32 fcs_bad; __le32 no_beacons; __le32 mib_int_count; } __packed; struct wmi_10x_pdev_stats { struct wmi_pdev_stats_base base; struct wmi_pdev_stats_tx tx; struct wmi_pdev_stats_rx rx; struct wmi_pdev_stats_peer peer; struct wmi_pdev_stats_extra extra; } __packed; struct wmi_pdev_stats_mem { __le32 dram_free; __le32 iram_free; } __packed; struct wmi_10_2_pdev_stats { struct wmi_pdev_stats_base base; struct wmi_pdev_stats_tx tx; __le32 mc_drop; struct wmi_pdev_stats_rx rx; __le32 pdev_rx_timeout; struct wmi_pdev_stats_mem mem; struct wmi_pdev_stats_peer peer; struct wmi_pdev_stats_extra extra; } __packed; struct wmi_10_4_pdev_stats { struct wmi_pdev_stats_base base; struct wmi_10_4_pdev_stats_tx tx; struct wmi_pdev_stats_rx rx; __le32 rx_ovfl_errs; struct wmi_pdev_stats_mem mem; __le32 sram_free_size; struct wmi_pdev_stats_extra extra; } __packed; /* * VDEV statistics */ #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31) #define WMI_VDEV_STATS_FTM_COUNT_LSB 0 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff struct wmi_vdev_stats { __le32 vdev_id; } __packed; struct wmi_vdev_stats_extd { __le32 vdev_id; __le32 ppdu_aggr_cnt; __le32 ppdu_noack; __le32 mpdu_queued; __le32 ppdu_nonaggr_cnt; __le32 mpdu_sw_requeued; __le32 mpdu_suc_retry; __le32 mpdu_suc_multitry; __le32 mpdu_fail_retry; __le32 tx_ftm_suc; __le32 tx_ftm_suc_retry; __le32 tx_ftm_fail; __le32 rx_ftmr_cnt; __le32 rx_ftmr_dup_cnt; __le32 rx_iftmr_cnt; __le32 rx_iftmr_dup_cnt; __le32 reserved[6]; } __packed; /* * peer statistics. * TODO: add more stats */ struct wmi_peer_stats { struct wmi_mac_addr peer_macaddr; __le32 peer_rssi; __le32 peer_tx_rate; } __packed; struct wmi_10x_peer_stats { struct wmi_peer_stats old; __le32 peer_rx_rate; } __packed; struct wmi_10_2_peer_stats { struct wmi_peer_stats old; __le32 peer_rx_rate; __le32 current_per; __le32 retries; __le32 tx_rate_count; __le32 max_4ms_frame_len; __le32 total_sub_frames; __le32 tx_bytes; __le32 num_pkt_loss_overflow[4]; __le32 num_pkt_loss_excess_retry[4]; } __packed; struct wmi_10_2_4_peer_stats { struct wmi_10_2_peer_stats common; __le32 peer_rssi_changed; } __packed; struct wmi_10_2_4_ext_peer_stats { struct wmi_10_2_peer_stats common; __le32 peer_rssi_changed; __le32 rx_duration; } __packed; struct wmi_10_4_peer_stats { struct wmi_mac_addr peer_macaddr; __le32 peer_rssi; __le32 peer_rssi_seq_num; __le32 peer_tx_rate; __le32 peer_rx_rate; __le32 current_per; __le32 retries; __le32 tx_rate_count; __le32 max_4ms_frame_len; __le32 total_sub_frames; __le32 tx_bytes; __le32 num_pkt_loss_overflow[4]; __le32 num_pkt_loss_excess_retry[4]; __le32 peer_rssi_changed; } __packed; struct wmi_10_4_peer_extd_stats { struct wmi_mac_addr peer_macaddr; __le32 inactive_time; __le32 peer_chain_rssi; __le32 rx_duration; __le32 reserved[10]; } __packed; struct wmi_10_4_bss_bcn_stats { __le32 vdev_id; __le32 bss_bcns_dropped; __le32 bss_bcn_delivered; } __packed; struct wmi_10_4_bss_bcn_filter_stats { __le32 bcns_dropped; __le32 bcns_delivered; __le32 active_filters; struct wmi_10_4_bss_bcn_stats bss_stats; } __packed; struct wmi_10_2_pdev_ext_stats { __le32 rx_rssi_comb; __le32 rx_rssi[4]; __le32 rx_mcs[10]; __le32 tx_mcs[10]; __le32 ack_rssi; } __packed; struct wmi_vdev_create_cmd { __le32 vdev_id; __le32 vdev_type; __le32 vdev_subtype; struct wmi_mac_addr vdev_macaddr; } __packed; enum wmi_vdev_type { WMI_VDEV_TYPE_AP = 1, WMI_VDEV_TYPE_STA = 2, WMI_VDEV_TYPE_IBSS = 3, WMI_VDEV_TYPE_MONITOR = 4, }; enum wmi_vdev_subtype { WMI_VDEV_SUBTYPE_NONE, WMI_VDEV_SUBTYPE_P2P_DEVICE, WMI_VDEV_SUBTYPE_P2P_CLIENT, WMI_VDEV_SUBTYPE_P2P_GO, WMI_VDEV_SUBTYPE_PROXY_STA, WMI_VDEV_SUBTYPE_MESH_11S, WMI_VDEV_SUBTYPE_MESH_NON_11S, }; enum wmi_vdev_subtype_legacy { WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, }; enum wmi_vdev_subtype_10_2_4 { WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, }; enum wmi_vdev_subtype_10_4 { WMI_VDEV_SUBTYPE_10_4_NONE = 0, WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, }; /* values for vdev_subtype */ /* values for vdev_start_request flags */ /* * Indicates that AP VDEV uses hidden ssid. only valid for * AP/GO */ #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) /* * Indicates if robust management frame/management frame * protection is enabled. For GO/AP vdevs, it indicates that * it may support station/client associations with RMF enabled. * For STA/client vdevs, it indicates that sta will * associate with AP with RMF enabled. */ #define WMI_VDEV_START_PMF_ENABLED (1 << 1) struct wmi_p2p_noa_descriptor { __le32 type_count; /* 255: continuous schedule, 0: reserved */ __le32 duration; /* Absent period duration in micro seconds */ __le32 interval; /* Absent period interval in micro seconds */ __le32 start_time; /* 32 bit tsf time when in starts */ } __packed; struct wmi_vdev_start_request_cmd { /* WMI channel */ struct wmi_channel chan; /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; /* requestor id identifying the caller module */ __le32 requestor_id; /* beacon interval from received beacon */ __le32 beacon_interval; /* DTIM Period from the received beacon */ __le32 dtim_period; /* Flags */ __le32 flags; /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ struct wmi_ssid ssid; /* beacon/probe response xmit rate. Applicable for SoftAP. */ __le32 bcn_tx_rate; /* beacon/probe response xmit power. Applicable for SoftAP. */ __le32 bcn_tx_power; /* number of p2p NOA descriptor(s) from scan entry */ __le32 num_noa_descriptors; /* * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. * During CAC, Our HW shouldn't ack ditected frames */ __le32 disable_hw_ack; /* actual p2p NOA descriptor from scan entry */ struct wmi_p2p_noa_descriptor noa_descriptors[2]; } __packed; struct wmi_vdev_restart_request_cmd { struct wmi_vdev_start_request_cmd vdev_start_request_cmd; } __packed; struct wmi_vdev_start_request_arg { u32 vdev_id; struct wmi_channel_arg channel; u32 bcn_intval; u32 dtim_period; u8 *ssid; u32 ssid_len; u32 bcn_tx_rate; u32 bcn_tx_power; bool disable_hw_ack; bool hidden_ssid; bool pmf_enabled; }; struct wmi_vdev_delete_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; } __packed; struct wmi_vdev_up_cmd { __le32 vdev_id; __le32 vdev_assoc_id; struct wmi_mac_addr vdev_bssid; } __packed; struct wmi_vdev_stop_cmd { __le32 vdev_id; } __packed; struct wmi_vdev_down_cmd { __le32 vdev_id; } __packed; struct wmi_vdev_standby_response_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; } __packed; struct wmi_vdev_resume_response_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; } __packed; struct wmi_vdev_set_param_cmd { __le32 vdev_id; __le32 param_id; __le32 param_value; } __packed; #define WMI_MAX_KEY_INDEX 3 #define WMI_MAX_KEY_LEN 32 #define WMI_KEY_PAIRWISE 0x00 #define WMI_KEY_GROUP 0x01 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ struct wmi_key_seq_counter { __le32 key_seq_counter_l; __le32 key_seq_counter_h; } __packed; enum wmi_cipher_suites { WMI_CIPHER_NONE, WMI_CIPHER_WEP, WMI_CIPHER_TKIP, WMI_CIPHER_AES_OCB, WMI_CIPHER_AES_CCM, WMI_CIPHER_WAPI, WMI_CIPHER_CKIP, WMI_CIPHER_AES_CMAC, WMI_CIPHER_AES_GCM, }; enum wmi_tlv_cipher_suites { WMI_TLV_CIPHER_NONE, WMI_TLV_CIPHER_WEP, WMI_TLV_CIPHER_TKIP, WMI_TLV_CIPHER_AES_OCB, WMI_TLV_CIPHER_AES_CCM, WMI_TLV_CIPHER_WAPI, WMI_TLV_CIPHER_CKIP, WMI_TLV_CIPHER_AES_CMAC, WMI_TLV_CIPHER_ANY, WMI_TLV_CIPHER_AES_GCM, }; struct wmi_vdev_install_key_cmd { __le32 vdev_id; struct wmi_mac_addr peer_macaddr; __le32 key_idx; __le32 key_flags; __le32 key_cipher; /* %WMI_CIPHER_ */ struct wmi_key_seq_counter key_rsc_counter; struct wmi_key_seq_counter key_global_rsc_counter; struct wmi_key_seq_counter key_tsc_counter; u8 wpi_key_rsc_counter[16]; u8 wpi_key_tsc_counter[16]; __le32 key_len; __le32 key_txmic_len; __le32 key_rxmic_len; /* contains key followed by tx mic followed by rx mic */ u8 key_data[]; } __packed; struct wmi_vdev_install_key_arg { u32 vdev_id; const u8 *macaddr; u32 key_idx; u32 key_flags; u32 key_cipher; u32 key_len; u32 key_txmic_len; u32 key_rxmic_len; const void *key_data; }; /* * vdev fixed rate format: * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ * - nss - b5:b4 - ss number (0 mean 1ss) * - rate_mcs - b3:b0 - as below * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps * HT/VHT: MCS index */ /* Preamble types to be used with VDEV fixed rate configuration */ enum wmi_rate_preamble { WMI_RATE_PREAMBLE_OFDM, WMI_RATE_PREAMBLE_CCK, WMI_RATE_PREAMBLE_HT, WMI_RATE_PREAMBLE_VHT, }; #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) #define ATH10K_HW_RATECODE(rate, nss, preamble) \ (((preamble) << 6) | ((nss) << 4) | (rate)) #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) #define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1) #define ATH10K_VHT_MCS_NUM 10 #define ATH10K_BW_NUM 6 #define ATH10K_NSS_NUM 4 #define ATH10K_LEGACY_NUM 12 #define ATH10K_GI_NUM 2 #define ATH10K_HT_MCS_NUM 32 #define ATH10K_RATE_TABLE_NUM 320 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2 /* Value to disable fixed rate setting */ #define WMI_FIXED_RATE_NONE (0xff) struct wmi_peer_param_map { u32 smps_state; u32 ampdu; u32 authorize; u32 chan_width; u32 nss; u32 use_4addr; u32 membership; u32 use_fixed_power; u32 user_pos; u32 crit_proto_hint_enabled; u32 tx_fail_cnt_thr; u32 set_hw_retry_cts2s; u32 ibss_atim_win_len; u32 debug; u32 phymode; u32 dummy_var; }; struct wmi_vdev_param_map { u32 rts_threshold; u32 fragmentation_threshold; u32 beacon_interval; u32 listen_interval; u32 multicast_rate; u32 mgmt_tx_rate; u32 slot_time; u32 preamble; u32 swba_time; u32 wmi_vdev_stats_update_period; u32 wmi_vdev_pwrsave_ageout_time; u32 wmi_vdev_host_swba_interval; u32 dtim_period; u32 wmi_vdev_oc_scheduler_air_time_limit; u32 wds; u32 atim_window; u32 bmiss_count_max; u32 bmiss_first_bcnt; u32 bmiss_final_bcnt; u32 feature_wmm; u32 chwidth; u32 chextoffset; u32 disable_htprotection; u32 sta_quickkickout; u32 mgmt_rate; u32 protection_mode; u32 fixed_rate; u32 sgi; u32 ldpc; u32 tx_stbc; u32 rx_stbc; u32 intra_bss_fwd; u32 def_keyid; u32 nss; u32 bcast_data_rate; u32 mcast_data_rate; u32 mcast_indicate; u32 dhcp_indicate; u32 unknown_dest_indicate; u32 ap_keepalive_min_idle_inactive_time_secs; u32 ap_keepalive_max_idle_inactive_time_secs; u32 ap_keepalive_max_unresponsive_time_secs; u32 ap_enable_nawds; u32 mcast2ucast_set; u32 enable_rtscts; u32 txbf; u32 packet_powersave; u32 drop_unencry; u32 tx_encap_type; u32 ap_detect_out_of_sync_sleeping_sta_time_secs; u32 rc_num_retries; u32 cabq_maxdur; u32 mfptest_set; u32 rts_fixed_rate; u32 vht_sgimask; u32 vht80_ratemask; u32 early_rx_adjust_enable; u32 early_rx_tgt_bmiss_num; u32 early_rx_bmiss_sample_cycle; u32 early_rx_slop_step; u32 early_rx_init_slop; u32 early_rx_adjust_pause; u32 proxy_sta; u32 meru_vc; u32 rx_decap_type; u32 bw_nss_ratemask; u32 inc_tsf; u32 dec_tsf; u32 disable_4addr_src_lrn; u32 rtt_responder_role; }; #define WMI_VDEV_PARAM_UNSUPPORTED 0 /* the definition of different VDEV parameters */ enum wmi_vdev_param { /* RTS Threshold */ WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, /* Fragmentation threshold */ WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, /* beacon interval in TUs */ WMI_VDEV_PARAM_BEACON_INTERVAL, /* Listen interval in TUs */ WMI_VDEV_PARAM_LISTEN_INTERVAL, /* multicast rate in Mbps */ WMI_VDEV_PARAM_MULTICAST_RATE, /* management frame rate in Mbps */ WMI_VDEV_PARAM_MGMT_TX_RATE, /* slot time (long vs short) */ WMI_VDEV_PARAM_SLOT_TIME, /* preamble (long vs short) */ WMI_VDEV_PARAM_PREAMBLE, /* SWBA time (time before tbtt in msec) */ WMI_VDEV_PARAM_SWBA_TIME, /* time period for updating VDEV stats */ WMI_VDEV_STATS_UPDATE_PERIOD, /* age out time in msec for frames queued for station in power save */ WMI_VDEV_PWRSAVE_AGEOUT_TIME, /* * Host SWBA interval (time in msec before tbtt for SWBA event * generation). */ WMI_VDEV_HOST_SWBA_INTERVAL, /* DTIM period (specified in units of num beacon intervals) */ WMI_VDEV_PARAM_DTIM_PERIOD, /* * scheduler air time limit for this VDEV. used by off chan * scheduler. */ WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, /* enable/dsiable WDS for this VDEV */ WMI_VDEV_PARAM_WDS, /* ATIM Window */ WMI_VDEV_PARAM_ATIM_WINDOW, /* BMISS max */ WMI_VDEV_PARAM_BMISS_COUNT_MAX, /* BMISS first time */ WMI_VDEV_PARAM_BMISS_FIRST_BCNT, /* BMISS final time */ WMI_VDEV_PARAM_BMISS_FINAL_BCNT, /* WMM enables/disabled */ WMI_VDEV_PARAM_FEATURE_WMM, /* Channel width */ WMI_VDEV_PARAM_CHWIDTH, /* Channel Offset */ WMI_VDEV_PARAM_CHEXTOFFSET, /* Disable HT Protection */ WMI_VDEV_PARAM_DISABLE_HTPROTECTION, /* Quick STA Kickout */ WMI_VDEV_PARAM_STA_QUICKKICKOUT, /* Rate to be used with Management frames */ WMI_VDEV_PARAM_MGMT_RATE, /* Protection Mode */ WMI_VDEV_PARAM_PROTECTION_MODE, /* Fixed rate setting */ WMI_VDEV_PARAM_FIXED_RATE, /* Short GI Enable/Disable */ WMI_VDEV_PARAM_SGI, /* Enable LDPC */ WMI_VDEV_PARAM_LDPC, /* Enable Tx STBC */ WMI_VDEV_PARAM_TX_STBC, /* Enable Rx STBC */ WMI_VDEV_PARAM_RX_STBC, /* Intra BSS forwarding */ WMI_VDEV_PARAM_INTRA_BSS_FWD, /* Setting Default xmit key for Vdev */ WMI_VDEV_PARAM_DEF_KEYID, /* NSS width */ WMI_VDEV_PARAM_NSS, /* Set the custom rate for the broadcast data frames */ WMI_VDEV_PARAM_BCAST_DATA_RATE, /* Set the custom rate (rate-code) for multicast data frames */ WMI_VDEV_PARAM_MCAST_DATA_RATE, /* Tx multicast packet indicate Enable/Disable */ WMI_VDEV_PARAM_MCAST_INDICATE, /* Tx DHCP packet indicate Enable/Disable */ WMI_VDEV_PARAM_DHCP_INDICATE, /* Enable host inspection of Tx unicast packet to unknown destination */ WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, /* The minimum amount of time AP begins to consider STA inactive */ WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, /* * An associated STA is considered inactive when there is no recent * TX/RX activity and no downlink frames are buffered for it. Once a * STA exceeds the maximum idle inactive time, the AP will send an * 802.11 data-null as a keep alive to verify the STA is still * associated. If the STA does ACK the data-null, or if the data-null * is buffered and the STA does not retrieve it, the STA will be * considered unresponsive * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). */ WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, /* * An associated STA is considered unresponsive if there is no recent * TX/RX activity and downlink frames are buffered for it. Once a STA * exceeds the maximum unresponsive time, the AP will send a * WMI_STA_KICKOUT event to the host so the STA can be deleted. */ WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ WMI_VDEV_PARAM_AP_ENABLE_NAWDS, /* Enable/Disable RTS-CTS */ WMI_VDEV_PARAM_ENABLE_RTSCTS, /* Enable TXBFee/er */ WMI_VDEV_PARAM_TXBF, /* Set packet power save */ WMI_VDEV_PARAM_PACKET_POWERSAVE, /* * Drops un-encrypted packets if eceived in an encrypted connection * otherwise forwards to host. */ WMI_VDEV_PARAM_DROP_UNENCRY, /* * Set the encapsulation type for frames. */ WMI_VDEV_PARAM_TX_ENCAP_TYPE, }; /* the definition of different VDEV parameters */ enum wmi_10x_vdev_param { /* RTS Threshold */ WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, /* Fragmentation threshold */ WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, /* beacon interval in TUs */ WMI_10X_VDEV_PARAM_BEACON_INTERVAL, /* Listen interval in TUs */ WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, /* multicast rate in Mbps */ WMI_10X_VDEV_PARAM_MULTICAST_RATE, /* management frame rate in Mbps */ WMI_10X_VDEV_PARAM_MGMT_TX_RATE, /* slot time (long vs short) */ WMI_10X_VDEV_PARAM_SLOT_TIME, /* preamble (long vs short) */ WMI_10X_VDEV_PARAM_PREAMBLE, /* SWBA time (time before tbtt in msec) */ WMI_10X_VDEV_PARAM_SWBA_TIME, /* time period for updating VDEV stats */ WMI_10X_VDEV_STATS_UPDATE_PERIOD, /* age out time in msec for frames queued for station in power save */ WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, /* * Host SWBA interval (time in msec before tbtt for SWBA event * generation). */ WMI_10X_VDEV_HOST_SWBA_INTERVAL, /* DTIM period (specified in units of num beacon intervals) */ WMI_10X_VDEV_PARAM_DTIM_PERIOD, /* * scheduler air time limit for this VDEV. used by off chan * scheduler. */ WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, /* enable/dsiable WDS for this VDEV */ WMI_10X_VDEV_PARAM_WDS, /* ATIM Window */ WMI_10X_VDEV_PARAM_ATIM_WINDOW, /* BMISS max */ WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, /* WMM enables/disabled */ WMI_10X_VDEV_PARAM_FEATURE_WMM, /* Channel width */ WMI_10X_VDEV_PARAM_CHWIDTH, /* Channel Offset */ WMI_10X_VDEV_PARAM_CHEXTOFFSET, /* Disable HT Protection */ WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, /* Quick STA Kickout */ WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, /* Rate to be used with Management frames */ WMI_10X_VDEV_PARAM_MGMT_RATE, /* Protection Mode */ WMI_10X_VDEV_PARAM_PROTECTION_MODE, /* Fixed rate setting */ WMI_10X_VDEV_PARAM_FIXED_RATE, /* Short GI Enable/Disable */ WMI_10X_VDEV_PARAM_SGI, /* Enable LDPC */ WMI_10X_VDEV_PARAM_LDPC, /* Enable Tx STBC */ WMI_10X_VDEV_PARAM_TX_STBC, /* Enable Rx STBC */ WMI_10X_VDEV_PARAM_RX_STBC, /* Intra BSS forwarding */ WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, /* Setting Default xmit key for Vdev */ WMI_10X_VDEV_PARAM_DEF_KEYID, /* NSS width */ WMI_10X_VDEV_PARAM_NSS, /* Set the custom rate for the broadcast data frames */ WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, /* Set the custom rate (rate-code) for multicast data frames */ WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, /* Tx multicast packet indicate Enable/Disable */ WMI_10X_VDEV_PARAM_MCAST_INDICATE, /* Tx DHCP packet indicate Enable/Disable */ WMI_10X_VDEV_PARAM_DHCP_INDICATE, /* Enable host inspection of Tx unicast packet to unknown destination */ WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, /* The minimum amount of time AP begins to consider STA inactive */ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, /* * An associated STA is considered inactive when there is no recent * TX/RX activity and no downlink frames are buffered for it. Once a * STA exceeds the maximum idle inactive time, the AP will send an * 802.11 data-null as a keep alive to verify the STA is still * associated. If the STA does ACK the data-null, or if the data-null * is buffered and the STA does not retrieve it, the STA will be * considered unresponsive * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). */ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, /* * An associated STA is considered unresponsive if there is no recent * TX/RX activity and downlink frames are buffered for it. Once a STA * exceeds the maximum unresponsive time, the AP will send a * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, /* Enable/Disable RTS-CTS */ WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, /* following are available as of firmware 10.2 */ WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, WMI_10X_VDEV_PARAM_CABQ_MAXDUR, WMI_10X_VDEV_PARAM_MFPTEST_SET, WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, WMI_10X_VDEV_PARAM_VHT_SGIMASK, WMI_10X_VDEV_PARAM_VHT80_RATEMASK, WMI_10X_VDEV_PARAM_TSF_INCREMENT, }; enum wmi_10_4_vdev_param { WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, WMI_10_4_VDEV_PARAM_MULTICAST_RATE, WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, WMI_10_4_VDEV_PARAM_SLOT_TIME, WMI_10_4_VDEV_PARAM_PREAMBLE, WMI_10_4_VDEV_PARAM_SWBA_TIME, WMI_10_4_VDEV_STATS_UPDATE_PERIOD, WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, WMI_10_4_VDEV_HOST_SWBA_INTERVAL, WMI_10_4_VDEV_PARAM_DTIM_PERIOD, WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, WMI_10_4_VDEV_PARAM_WDS, WMI_10_4_VDEV_PARAM_ATIM_WINDOW, WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, WMI_10_4_VDEV_PARAM_FEATURE_WMM, WMI_10_4_VDEV_PARAM_CHWIDTH, WMI_10_4_VDEV_PARAM_CHEXTOFFSET, WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, WMI_10_4_VDEV_PARAM_MGMT_RATE, WMI_10_4_VDEV_PARAM_PROTECTION_MODE, WMI_10_4_VDEV_PARAM_FIXED_RATE, WMI_10_4_VDEV_PARAM_SGI, WMI_10_4_VDEV_PARAM_LDPC, WMI_10_4_VDEV_PARAM_TX_STBC, WMI_10_4_VDEV_PARAM_RX_STBC, WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, WMI_10_4_VDEV_PARAM_DEF_KEYID, WMI_10_4_VDEV_PARAM_NSS, WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, WMI_10_4_VDEV_PARAM_MCAST_INDICATE, WMI_10_4_VDEV_PARAM_DHCP_INDICATE, WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, WMI_10_4_VDEV_PARAM_TXBF, WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, WMI_10_4_VDEV_PARAM_DROP_UNENCRY, WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, WMI_10_4_VDEV_PARAM_MFPTEST_SET, WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, WMI_10_4_VDEV_PARAM_VHT_SGIMASK, WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, WMI_10_4_VDEV_PARAM_PROXY_STA, WMI_10_4_VDEV_PARAM_MERU_VC, WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, WMI_10_4_VDEV_PARAM_SENSOR_AP, WMI_10_4_VDEV_PARAM_BEACON_RATE, WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, WMI_10_4_VDEV_PARAM_STA_KICKOUT, WMI_10_4_VDEV_PARAM_CAPABILITIES, WMI_10_4_VDEV_PARAM_TSF_INCREMENT, WMI_10_4_VDEV_PARAM_RX_FILTER, WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, WMI_10_4_VDEV_PARAM_TSF_DECREMENT, WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE, WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC, WMI_10_4_VDEV_PARAM_NSS_VHT160, WMI_10_4_VDEV_PARAM_NSS_VHT80_80, WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC, WMI_10_4_VDEV_PARAM_DISABLE_CABQ, WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE, WMI_10_4_VDEV_PARAM_TX_POWER, WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE, WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN, }; #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 /* slot time long */ #define WMI_VDEV_SLOT_TIME_LONG 0x1 /* slot time short */ #define WMI_VDEV_SLOT_TIME_SHORT 0x2 /* preablbe long */ #define WMI_VDEV_PREAMBLE_LONG 0x1 /* preablbe short */ #define WMI_VDEV_PREAMBLE_SHORT 0x2 enum wmi_start_event_param { WMI_VDEV_RESP_START_EVENT = 0, WMI_VDEV_RESP_RESTART_EVENT, }; struct wmi_vdev_start_response_event { __le32 vdev_id; __le32 req_id; __le32 resp_type; /* %WMI_VDEV_RESP_ */ __le32 status; } __packed; struct wmi_vdev_standby_req_event { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; } __packed; struct wmi_vdev_resume_req_event { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; } __packed; struct wmi_vdev_stopped_event { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; } __packed; /* * common structure used for simple events * (stopped, resume_req, standby response) */ struct wmi_vdev_simple_event { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; } __packed; /* VDEV start response status codes */ /* VDEV successfully started */ #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 /* requested VDEV not found */ #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 /* unsupported VDEV combination */ #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 /* TODO: please add more comments if you have in-depth information */ struct wmi_vdev_spectral_conf_cmd { __le32 vdev_id; /* number of fft samples to send (0 for infinite) */ __le32 scan_count; __le32 scan_period; __le32 scan_priority; /* number of bins in the FFT: 2^(fft_size - bin_scale) */ __le32 scan_fft_size; __le32 scan_gc_ena; __le32 scan_restart_ena; __le32 scan_noise_floor_ref; __le32 scan_init_delay; __le32 scan_nb_tone_thr; __le32 scan_str_bin_thr; __le32 scan_wb_rpt_mode; __le32 scan_rssi_rpt_mode; __le32 scan_rssi_thr; __le32 scan_pwr_format; /* rpt_mode: Format of FFT report to software for spectral scan * triggered FFTs: * 0: No FFT report (only spectral scan summary report) * 1: 2-dword summary of metrics for each completed FFT + spectral * scan summary report * 2: 2-dword summary of metrics for each completed FFT + * 1x- oversampled bins(in-band) per FFT + spectral scan summary * report * 3: 2-dword summary of metrics for each completed FFT + * 2x- oversampled bins (all) per FFT + spectral scan summary */ __le32 scan_rpt_mode; __le32 scan_bin_scale; __le32 scan_dbm_adj; __le32 scan_chn_mask; } __packed; struct wmi_vdev_spectral_conf_arg { u32 vdev_id; u32 scan_count; u32 scan_period; u32 scan_priority; u32 scan_fft_size; u32 scan_gc_ena; u32 scan_restart_ena; u32 scan_noise_floor_ref; u32 scan_init_delay; u32 scan_nb_tone_thr; u32 scan_str_bin_thr; u32 scan_wb_rpt_mode; u32 scan_rssi_rpt_mode; u32 scan_rssi_thr; u32 scan_pwr_format; u32 scan_rpt_mode; u32 scan_bin_scale; u32 scan_dbm_adj; u32 scan_chn_mask; }; #define WMI_SPECTRAL_ENABLE_DEFAULT 0 #define WMI_SPECTRAL_COUNT_DEFAULT 0 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 struct wmi_vdev_spectral_enable_cmd { __le32 vdev_id; __le32 trigger_cmd; __le32 enable_cmd; } __packed; #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 /* Beacon processing related command and event structures */ struct wmi_bcn_tx_hdr { __le32 vdev_id; __le32 tx_rate; __le32 tx_power; __le32 bcn_len; } __packed; struct wmi_bcn_tx_cmd { struct wmi_bcn_tx_hdr hdr; u8 *bcn[]; } __packed; struct wmi_bcn_tx_arg { u32 vdev_id; u32 tx_rate; u32 tx_power; u32 bcn_len; const void *bcn; }; enum wmi_bcn_tx_ref_flags { WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, }; /* TODO: It is unclear why "no antenna" works while any other seemingly valid * chainmask yields no beacons on the air at all. */ #define WMI_BCN_TX_REF_DEF_ANTENNA 0 struct wmi_bcn_tx_ref_cmd { __le32 vdev_id; __le32 data_len; /* physical address of the frame - dma pointer */ __le32 data_ptr; /* id for host to track */ __le32 msdu_id; /* frame ctrl to setup PPDU desc */ __le32 frame_control; /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ __le32 flags; /* introduced in 10.2 */ __le32 antenna_mask; } __packed; /* Beacon filter */ #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ struct wmi_bcn_filter_rx_cmd { /* Filter ID */ __le32 bcn_filter_id; /* Filter type - wmi_bcn_filter */ __le32 bcn_filter; /* Buffer len */ __le32 bcn_filter_len; /* Filter info (threshold, BSSID, RSSI) */ u8 *bcn_filter_buf; } __packed; /* Capabilities and IEs to be passed to firmware */ struct wmi_bcn_prb_info { /* Capabilities */ __le32 caps; /* ERP info */ __le32 erp; /* Advanced capabilities */ /* HT capabilities */ /* HT Info */ /* ibss_dfs */ /* wpa Info */ /* rsn Info */ /* rrm info */ /* ath_ext */ /* app IE */ } __packed; struct wmi_bcn_tmpl_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; /* TIM IE offset from the beginning of the template. */ __le32 tim_ie_offset; /* beacon probe capabilities and IEs */ struct wmi_bcn_prb_info bcn_prb_info; /* beacon buffer length */ __le32 buf_len; /* variable length data */ u8 data[1]; } __packed; struct wmi_prb_tmpl_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; /* beacon probe capabilities and IEs */ struct wmi_bcn_prb_info bcn_prb_info; /* beacon buffer length */ __le32 buf_len; /* Variable length data */ u8 data[1]; } __packed; enum wmi_sta_ps_mode { /* enable power save for the given STA VDEV */ WMI_STA_PS_MODE_DISABLED = 0, /* disable power save for a given STA VDEV */ WMI_STA_PS_MODE_ENABLED = 1, }; struct wmi_sta_powersave_mode_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; /* * Power save mode * (see enum wmi_sta_ps_mode) */ __le32 sta_ps_mode; } __packed; enum wmi_csa_offload_en { WMI_CSA_OFFLOAD_DISABLE = 0, WMI_CSA_OFFLOAD_ENABLE = 1, }; struct wmi_csa_offload_enable_cmd { __le32 vdev_id; __le32 csa_offload_enable; } __packed; struct wmi_csa_offload_chanswitch_cmd { __le32 vdev_id; struct wmi_channel chan; } __packed; /* * This parameter controls the policy for retrieving frames from AP while the * STA is in sleep state. * * Only takes affect if the sta_ps_mode is enabled */ enum wmi_sta_ps_param_rx_wake_policy { /* * Wake up when ever there is an RX activity on the VDEV. In this mode * the Power save SM(state machine) will come out of sleep by either * sending null frame (or) a data frame (with PS==0) in response to TIM * bit set in the received beacon frame from AP. */ WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, /* * Here the power save state machine will not wakeup in response to TIM * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all * access categories are delivery-enabled, the station will send a * UAPSD trigger frame, otherwise it will send a PS-Poll. */ WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, }; /* * Number of tx frames/beacon that cause the power save SM to wake up. * * Value 1 causes the SM to wake up for every TX. Value 0 has a special * meaning, It will cause the SM to never wake up. This is useful if you want * to keep the system to sleep all the time for some kind of test mode . host * can change this parameter any time. It will affect at the next tx frame. */ enum wmi_sta_ps_param_tx_wake_threshold { WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, /* * Values greater than one indicate that many TX attempts per beacon * interval before the STA will wake up */ }; /* * The maximum number of PS-Poll frames the FW will send in response to * traffic advertised in TIM before waking up (by sending a null frame with PS * = 0). Value 0 has a special meaning: there is no maximum count and the FW * will send as many PS-Poll as are necessary to retrieve buffered BU. This * parameter is used when the RX wake policy is * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. */ enum wmi_sta_ps_param_pspoll_count { WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, /* * Values greater than 0 indicate the maximum numer of PS-Poll frames * FW will send before waking up. */ /* When u-APSD is enabled the firmware will be very reluctant to exit * STA PS. This could result in very poor Rx performance with STA doing * PS-Poll for each and every buffered frame. This value is a bit * arbitrary. */ WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, }; /* * This will include the delivery and trigger enabled state for every AC. * This is the negotiated state with AP. The host MLME needs to set this based * on AP capability and the state Set in the association request by the * station MLME.Lower 8 bits of the value specify the UAPSD configuration. */ #define WMI_UAPSD_AC_TYPE_DELI 0 #define WMI_UAPSD_AC_TYPE_TRIG 1 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) enum wmi_sta_ps_param_uapsd { WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), }; #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX struct wmi_sta_uapsd_auto_trig_param { __le32 wmm_ac; __le32 user_priority; __le32 service_interval; __le32 suspend_interval; __le32 delay_interval; }; struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { __le32 vdev_id; struct wmi_mac_addr peer_macaddr; __le32 num_ac; }; struct wmi_sta_uapsd_auto_trig_arg { u32 wmm_ac; u32 user_priority; u32 service_interval; u32 suspend_interval; u32 delay_interval; }; enum wmi_sta_powersave_param { /* * Controls how frames are retrievd from AP while STA is sleeping * * (see enum wmi_sta_ps_param_rx_wake_policy) */ WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, /* * The STA will go active after this many TX * * (see enum wmi_sta_ps_param_tx_wake_threshold) */ WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, /* * Number of PS-Poll to send before STA wakes up * * (see enum wmi_sta_ps_param_pspoll_count) * */ WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, /* * TX/RX inactivity time in msec before going to sleep. * * The power save SM will monitor tx/rx activity on the VDEV, if no * activity for the specified msec of the parameter the Power save * SM will go to sleep. */ WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, /* * Set uapsd configuration. * * (see enum wmi_sta_ps_param_uapsd) */ WMI_STA_PS_PARAM_UAPSD = 4, }; struct wmi_sta_powersave_param_cmd { __le32 vdev_id; __le32 param_id; /* %WMI_STA_PS_PARAM_ */ __le32 param_value; } __packed; /* No MIMO power save */ #define WMI_STA_MIMO_PS_MODE_DISABLE /* mimo powersave mode static*/ #define WMI_STA_MIMO_PS_MODE_STATIC /* mimo powersave mode dynamic */ #define WMI_STA_MIMO_PS_MODE_DYNAMIC struct wmi_sta_mimo_ps_mode_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; /* mimo powersave mode as defined above */ __le32 mimo_pwrsave_mode; } __packed; /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ enum wmi_ap_ps_param_uapsd { WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), }; /* U-APSD maximum service period of peer station */ enum wmi_ap_ps_peer_param_max_sp { WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, }; /* * AP power save parameter * Set a power save specific parameter for a peer station */ enum wmi_ap_ps_peer_param { /* Set uapsd configuration for a given peer. * * Include the delivery and trigger enabled state for every AC. * The host MLME needs to set this based on AP capability and stations * request Set in the association request received from the station. * * Lower 8 bits of the value specify the UAPSD configuration. * * (see enum wmi_ap_ps_param_uapsd) * The default value is 0. */ WMI_AP_PS_PEER_PARAM_UAPSD = 0, /* * Set the service period for a UAPSD capable station * * The service period from wme ie in the (re)assoc request frame. * * (see enum wmi_ap_ps_peer_param_max_sp) */ WMI_AP_PS_PEER_PARAM_MAX_SP = 1, /* Time in seconds for aging out buffered frames for STA in PS */ WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, }; struct wmi_ap_ps_peer_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; /* peer MAC address */ struct wmi_mac_addr peer_macaddr; /* AP powersave param (see enum wmi_ap_ps_peer_param) */ __le32 param_id; /* AP powersave param value */ __le32 param_value; } __packed; /* 128 clients = 4 words */ #define WMI_TIM_BITMAP_ARRAY_SIZE 4 struct wmi_tim_info { __le32 tim_len; __le32 tim_mcast; __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; __le32 tim_changed; __le32 tim_num_ps_pending; } __packed; struct wmi_tim_info_arg { __le32 tim_len; __le32 tim_mcast; const __le32 *tim_bitmap; __le32 tim_changed; __le32 tim_num_ps_pending; } __packed; /* Maximum number of NOA Descriptors supported */ #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) struct wmi_p2p_noa_info { /* Bit 0 - Flag to indicate an update in NOA schedule * Bits 7-1 - Reserved */ u8 changed; /* NOA index */ u8 index; /* Bit 0 - Opp PS state of the AP * Bits 1-7 - Ctwindow in TUs */ u8 ctwindow_oppps; /* Number of NOA descriptors */ u8 num_descriptors; struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; } __packed; struct wmi_bcn_info { struct wmi_tim_info tim_info; struct wmi_p2p_noa_info p2p_noa_info; } __packed; struct wmi_host_swba_event { __le32 vdev_map; struct wmi_bcn_info bcn_info[]; } __packed; struct wmi_10_2_4_bcn_info { struct wmi_tim_info tim_info; /* The 10.2.4 FW doesn't have p2p NOA info */ } __packed; struct wmi_10_2_4_host_swba_event { __le32 vdev_map; struct wmi_10_2_4_bcn_info bcn_info[]; } __packed; /* 16 words = 512 client + 1 word = for guard */ #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 struct wmi_10_4_tim_info { __le32 tim_len; __le32 tim_mcast; __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; __le32 tim_changed; __le32 tim_num_ps_pending; } __packed; #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 struct wmi_10_4_p2p_noa_info { /* Bit 0 - Flag to indicate an update in NOA schedule * Bits 7-1 - Reserved */ u8 changed; /* NOA index */ u8 index; /* Bit 0 - Opp PS state of the AP * Bits 1-7 - Ctwindow in TUs */ u8 ctwindow_oppps; /* Number of NOA descriptors */ u8 num_descriptors; struct wmi_p2p_noa_descriptor noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; } __packed; struct wmi_10_4_bcn_info { struct wmi_10_4_tim_info tim_info; struct wmi_10_4_p2p_noa_info p2p_noa_info; } __packed; struct wmi_10_4_host_swba_event { __le32 vdev_map; struct wmi_10_4_bcn_info bcn_info[]; } __packed; #define WMI_MAX_AP_VDEV 16 struct wmi_tbtt_offset_event { __le32 vdev_map; __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; } __packed; struct wmi_peer_create_cmd { __le32 vdev_id; struct wmi_mac_addr peer_macaddr; __le32 peer_type; } __packed; enum wmi_peer_type { WMI_PEER_TYPE_DEFAULT = 0, WMI_PEER_TYPE_BSS = 1, WMI_PEER_TYPE_TDLS = 2, }; struct wmi_peer_delete_cmd { __le32 vdev_id; struct wmi_mac_addr peer_macaddr; } __packed; struct wmi_peer_flush_tids_cmd { __le32 vdev_id; struct wmi_mac_addr peer_macaddr; __le32 peer_tid_bitmap; } __packed; struct wmi_fixed_rate { /* * rate mode . 0: disable fixed rate (auto rate) * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps * 2: ht20 11n rate specified as mcs index * 3: ht40 11n rate specified as mcs index */ __le32 rate_mode; /* * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) * and series 3 is stored at byte 3 (MSB) */ __le32 rate_series; /* * 4 retry counts for 4 rate series. retry count for rate 0 is stored * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 * (MSB) */ __le32 rate_retries; } __packed; struct wmi_peer_fixed_rate_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; /* peer MAC address */ struct wmi_mac_addr peer_macaddr; /* fixed rate */ struct wmi_fixed_rate peer_fixed_rate; } __packed; #define WMI_MGMT_TID 17 struct wmi_addba_clear_resp_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; /* peer MAC address */ struct wmi_mac_addr peer_macaddr; } __packed; struct wmi_addba_send_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; /* peer MAC address */ struct wmi_mac_addr peer_macaddr; /* Tid number */ __le32 tid; /* Buffer/Window size*/ __le32 buffersize; } __packed; struct wmi_delba_send_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; /* peer MAC address */ struct wmi_mac_addr peer_macaddr; /* Tid number */ __le32 tid; /* Is Initiator */ __le32 initiator; /* Reason code */ __le32 reasoncode; } __packed; struct wmi_addba_setresponse_cmd { /* unique id identifying the vdev, generated by the caller */ __le32 vdev_id; /* peer mac address */ struct wmi_mac_addr peer_macaddr; /* Tid number */ __le32 tid; /* status code */ __le32 statuscode; } __packed; struct wmi_send_singleamsdu_cmd { /* unique id identifying the vdev, generated by the caller */ __le32 vdev_id; /* peer mac address */ struct wmi_mac_addr peer_macaddr; /* Tid number */ __le32 tid; } __packed; enum wmi_peer_smps_state { WMI_PEER_SMPS_PS_NONE = 0x0, WMI_PEER_SMPS_STATIC = 0x1, WMI_PEER_SMPS_DYNAMIC = 0x2 }; enum wmi_peer_chwidth { WMI_PEER_CHWIDTH_20MHZ = 0, WMI_PEER_CHWIDTH_40MHZ = 1, WMI_PEER_CHWIDTH_80MHZ = 2, WMI_PEER_CHWIDTH_160MHZ = 3, }; enum wmi_peer_param { WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ WMI_PEER_AMPDU = 0x2, WMI_PEER_AUTHORIZE = 0x3, WMI_PEER_CHAN_WIDTH = 0x4, WMI_PEER_NSS = 0x5, WMI_PEER_USE_4ADDR = 0x6, WMI_PEER_USE_FIXED_PWR = 0x8, WMI_PEER_PARAM_FIXED_RATE = 0x9, WMI_PEER_DEBUG = 0xa, WMI_PEER_PHYMODE = 0xd, WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ }; struct wmi_peer_set_param_cmd { __le32 vdev_id; struct wmi_mac_addr peer_macaddr; __le32 param_id; __le32 param_value; } __packed; #define MAX_SUPPORTED_RATES 128 struct wmi_rate_set { /* total number of rates */ __le32 num_rates; /* * rates (each 8bit value) packed into a 32 bit word. * the rates are filled from least significant byte to most * significant byte. */ __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; } __packed; struct wmi_rate_set_arg { unsigned int num_rates; u8 rates[MAX_SUPPORTED_RATES]; }; /* * NOTE: It would bea good idea to represent the Tx MCS * info in one word and Rx in another word. This is split * into multiple words for convenience */ struct wmi_vht_rate_set { __le32 rx_max_rate; /* Max Rx data rate */ __le32 rx_mcs_set; /* Negotiated RX VHT rates */ __le32 tx_max_rate; /* Max Tx data rate */ __le32 tx_mcs_set; /* Negotiated TX VHT rates */ } __packed; struct wmi_vht_rate_set_arg { u32 rx_max_rate; u32 rx_mcs_set; u32 tx_max_rate; u32 tx_mcs_set; }; struct wmi_peer_set_rates_cmd { /* peer MAC address */ struct wmi_mac_addr peer_macaddr; /* legacy rate set */ struct wmi_rate_set peer_legacy_rates; /* ht rate set */ struct wmi_rate_set peer_ht_rates; } __packed; struct wmi_peer_set_q_empty_callback_cmd { /* unique id identifying the VDEV, generated by the caller */ __le32 vdev_id; /* peer MAC address */ struct wmi_mac_addr peer_macaddr; __le32 callback_enable; } __packed; struct wmi_peer_flags_map { u32 auth; u32 qos; u32 need_ptk_4_way; u32 need_gtk_2_way; u32 apsd; u32 ht; u32 bw40; u32 stbc; u32 ldbc; u32 dyn_mimops; u32 static_mimops; u32 spatial_mux; u32 vht; u32 bw80; u32 vht_2g; u32 pmf; u32 bw160; }; enum wmi_peer_flags { WMI_PEER_AUTH = 0x00000001, WMI_PEER_QOS = 0x00000002, WMI_PEER_NEED_PTK_4_WAY = 0x00000004, WMI_PEER_NEED_GTK_2_WAY = 0x00000010, WMI_PEER_APSD = 0x00000800, WMI_PEER_HT = 0x00001000, WMI_PEER_40MHZ = 0x00002000, WMI_PEER_STBC = 0x00008000, WMI_PEER_LDPC = 0x00010000, WMI_PEER_DYN_MIMOPS = 0x00020000, WMI_PEER_STATIC_MIMOPS = 0x00040000, WMI_PEER_SPATIAL_MUX = 0x00200000, WMI_PEER_VHT = 0x02000000, WMI_PEER_80MHZ = 0x04000000, WMI_PEER_VHT_2G = 0x08000000, WMI_PEER_PMF = 0x10000000, WMI_PEER_160MHZ = 0x20000000 }; enum wmi_10x_peer_flags { WMI_10X_PEER_AUTH = 0x00000001, WMI_10X_PEER_QOS = 0x00000002, WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, WMI_10X_PEER_APSD = 0x00000800, WMI_10X_PEER_HT = 0x00001000, WMI_10X_PEER_40MHZ = 0x00002000, WMI_10X_PEER_STBC = 0x00008000, WMI_10X_PEER_LDPC = 0x00010000, WMI_10X_PEER_DYN_MIMOPS = 0x00020000, WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, WMI_10X_PEER_SPATIAL_MUX = 0x00200000, WMI_10X_PEER_VHT = 0x02000000, WMI_10X_PEER_80MHZ = 0x04000000, WMI_10X_PEER_160MHZ = 0x20000000 }; enum wmi_10_2_peer_flags { WMI_10_2_PEER_AUTH = 0x00000001, WMI_10_2_PEER_QOS = 0x00000002, WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, WMI_10_2_PEER_APSD = 0x00000800, WMI_10_2_PEER_HT = 0x00001000, WMI_10_2_PEER_40MHZ = 0x00002000, WMI_10_2_PEER_STBC = 0x00008000, WMI_10_2_PEER_LDPC = 0x00010000, WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, WMI_10_2_PEER_VHT = 0x02000000, WMI_10_2_PEER_80MHZ = 0x04000000, WMI_10_2_PEER_VHT_2G = 0x08000000, WMI_10_2_PEER_PMF = 0x10000000, WMI_10_2_PEER_160MHZ = 0x20000000 }; /* * Peer rate capabilities. * * This is of interest to the ratecontrol * module which resides in the firmware. The bit definitions are * consistent with that defined in if_athrate.c. */ #define WMI_RC_DS_FLAG 0x01 #define WMI_RC_CW40_FLAG 0x02 #define WMI_RC_SGI_FLAG 0x04 #define WMI_RC_HT_FLAG 0x08 #define WMI_RC_RTSCTS_FLAG 0x10 #define WMI_RC_TX_STBC_FLAG 0x20 #define WMI_RC_RX_STBC_FLAG 0xC0 #define WMI_RC_RX_STBC_FLAG_S 6 #define WMI_RC_WEP_TKIP_FLAG 0x100 #define WMI_RC_TS_FLAG 0x200 #define WMI_RC_UAPSD_FLAG 0x400 /* Maximum listen interval supported by hw in units of beacon interval */ #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 struct wmi_common_peer_assoc_complete_cmd { struct wmi_mac_addr peer_macaddr; __le32 vdev_id; __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ __le32 peer_associd; /* 16 LSBs */ __le32 peer_flags; __le32 peer_caps; /* 16 LSBs */ __le32 peer_listen_intval; __le32 peer_ht_caps; __le32 peer_max_mpdu; __le32 peer_mpdu_density; /* 0..16 */ __le32 peer_rate_caps; struct wmi_rate_set peer_legacy_rates; struct wmi_rate_set peer_ht_rates; __le32 peer_nss; /* num of spatial streams */ __le32 peer_vht_caps; __le32 peer_phymode; struct wmi_vht_rate_set peer_vht_rates; }; struct wmi_main_peer_assoc_complete_cmd { struct wmi_common_peer_assoc_complete_cmd cmd; /* HT Operation Element of the peer. Five bytes packed in 2 * INT32 array and filled from lsb to msb. */ __le32 peer_ht_info[2]; } __packed; struct wmi_10_1_peer_assoc_complete_cmd { struct wmi_common_peer_assoc_complete_cmd cmd; } __packed; #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 struct wmi_10_2_peer_assoc_complete_cmd { struct wmi_common_peer_assoc_complete_cmd cmd; __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ } __packed; /* NSS Mapping to FW */ #define WMI_PEER_NSS_MAP_ENABLE BIT(31) #define WMI_PEER_NSS_160MHZ_MASK GENMASK(2, 0) #define WMI_PEER_NSS_80_80MHZ_MASK GENMASK(5, 3) struct wmi_10_4_peer_assoc_complete_cmd { struct wmi_10_2_peer_assoc_complete_cmd cmd; __le32 peer_bw_rxnss_override; } __packed; struct wmi_peer_assoc_complete_arg { u8 addr[ETH_ALEN]; u32 vdev_id; bool peer_reassoc; u16 peer_aid; u32 peer_flags; /* see %WMI_PEER_ */ u16 peer_caps; u32 peer_listen_intval; u32 peer_ht_caps; u32 peer_max_mpdu; u32 peer_mpdu_density; /* 0..16 */ u32 peer_rate_caps; /* see %WMI_RC_ */ struct wmi_rate_set_arg peer_legacy_rates; struct wmi_rate_set_arg peer_ht_rates; u32 peer_num_spatial_streams; u32 peer_vht_caps; enum wmi_phy_mode peer_phymode; struct wmi_vht_rate_set_arg peer_vht_rates; u32 peer_bw_rxnss_override; }; struct wmi_peer_add_wds_entry_cmd { /* peer MAC address */ struct wmi_mac_addr peer_macaddr; /* wds MAC addr */ struct wmi_mac_addr wds_macaddr; } __packed; struct wmi_peer_remove_wds_entry_cmd { /* wds MAC addr */ struct wmi_mac_addr wds_macaddr; } __packed; struct wmi_peer_q_empty_callback_event { /* peer MAC address */ struct wmi_mac_addr peer_macaddr; } __packed; /* * Channel info WMI event */ struct wmi_chan_info_event { __le32 err_code; __le32 freq; __le32 cmd_flags; __le32 noise_floor; __le32 rx_clear_count; __le32 cycle_count; } __packed; struct wmi_10_4_chan_info_event { __le32 err_code; __le32 freq; __le32 cmd_flags; __le32 noise_floor; __le32 rx_clear_count; __le32 cycle_count; __le32 chan_tx_pwr_range; __le32 chan_tx_pwr_tp; __le32 rx_frame_count; } __packed; struct wmi_peer_sta_kickout_event { struct wmi_mac_addr peer_macaddr; } __packed; #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) /* Beacon filter wmi command info */ #define BCN_FLT_MAX_SUPPORTED_IES 256 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) struct bss_bcn_stats { __le32 vdev_id; __le32 bss_bcnsdropped; __le32 bss_bcnsdelivered; } __packed; struct bcn_filter_stats { __le32 bcns_dropped; __le32 bcns_delivered; __le32 activefilters; struct bss_bcn_stats bss_stats; } __packed; struct wmi_add_bcn_filter_cmd { u32 vdev_id; u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; } __packed; enum wmi_sta_keepalive_method { WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, }; #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 /* Firmware crashes if keepalive interval exceeds this limit */ #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff /* note: ip4 addresses are in network byte order, i.e. big endian */ struct wmi_sta_keepalive_arp_resp { __be32 src_ip4_addr; __be32 dest_ip4_addr; struct wmi_mac_addr dest_mac_addr; } __packed; struct wmi_sta_keepalive_cmd { __le32 vdev_id; __le32 enabled; __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ __le32 interval; /* in seconds */ struct wmi_sta_keepalive_arp_resp arp_resp; } __packed; struct wmi_sta_keepalive_arg { u32 vdev_id; u32 enabled; u32 method; u32 interval; __be32 src_ip4_addr; __be32 dest_ip4_addr; const u8 dest_mac_addr[ETH_ALEN]; }; enum wmi_force_fw_hang_type { WMI_FORCE_FW_HANG_ASSERT = 1, WMI_FORCE_FW_HANG_NO_DETECT, WMI_FORCE_FW_HANG_CTRL_EP_FULL, WMI_FORCE_FW_HANG_EMPTY_POINT, WMI_FORCE_FW_HANG_STACK_OVERFLOW, WMI_FORCE_FW_HANG_INFINITE_LOOP, }; #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF struct wmi_force_fw_hang_cmd { __le32 type; __le32 delay_ms; } __packed; enum wmi_pdev_reset_mode_type { WMI_RST_MODE_TX_FLUSH = 1, WMI_RST_MODE_WARM_RESET, WMI_RST_MODE_COLD_RESET, WMI_RST_MODE_WARM_RESET_RESTORE_CAL, WMI_RST_MODE_COLD_RESET_RESTORE_CAL, WMI_RST_MODE_MAX, }; enum ath10k_dbglog_level { ATH10K_DBGLOG_LEVEL_VERBOSE = 0, ATH10K_DBGLOG_LEVEL_INFO = 1, ATH10K_DBGLOG_LEVEL_WARN = 2, ATH10K_DBGLOG_LEVEL_ERR = 3, }; /* VAP ids to enable dbglog */ #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff /* to enable dbglog in the firmware */ #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 /* timestamp resolution */ #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 /* number of queued messages before sending them to the host */ #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 /* * Log levels to enable. This defines the minimum level to enable, this is * not a bitmask. See enum ath10k_dbglog_level for the values. */ #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 /* * Note: this is a cleaned up version of a struct firmware uses. For * example, config_valid was hidden inside an array. */ struct wmi_dbglog_cfg_cmd { /* bitmask to hold mod id config*/ __le32 module_enable; /* see ATH10K_DBGLOG_CFG_ */ __le32 config_enable; /* mask of module id bits to be changed */ __le32 module_valid; /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ __le32 config_valid; } __packed; struct wmi_10_4_dbglog_cfg_cmd { /* bitmask to hold mod id config*/ __le64 module_enable; /* see ATH10K_DBGLOG_CFG_ */ __le32 config_enable; /* mask of module id bits to be changed */ __le64 module_valid; /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ __le32 config_valid; } __packed; enum wmi_roam_reason { WMI_ROAM_REASON_BETTER_AP = 1, WMI_ROAM_REASON_BEACON_MISS = 2, WMI_ROAM_REASON_LOW_RSSI = 3, WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, WMI_ROAM_REASON_HO_FAILED = 5, /* keep last */ WMI_ROAM_REASON_MAX, }; struct wmi_roam_ev { __le32 vdev_id; __le32 reason; } __packed; #define ATH10K_FRAGMT_THRESHOLD_MIN 540 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 #define WMI_MAX_EVENT 0x1000 /* Maximum number of pending TXed WMI packets */ #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) /* By default disable power save for IBSS */ #define ATH10K_DEFAULT_ATIM 0 #define WMI_MAX_MEM_REQS 16 struct wmi_scan_ev_arg { __le32 event_type; /* %WMI_SCAN_EVENT_ */ __le32 reason; /* %WMI_SCAN_REASON_ */ __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ __le32 scan_req_id; __le32 scan_id; __le32 vdev_id; }; struct mgmt_tx_compl_params { u32 desc_id; u32 status; u32 ppdu_id; int ack_rssi; }; struct wmi_tlv_mgmt_tx_compl_ev_arg { __le32 desc_id; __le32 status; __le32 pdev_id; __le32 ppdu_id; __le32 ack_rssi; }; struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg { __le32 num_reports; const __le32 *desc_ids; const __le32 *status; const __le32 *ppdu_ids; const __le32 *ack_rssi; }; struct wmi_peer_delete_resp_ev_arg { __le32 vdev_id; struct wmi_mac_addr peer_addr; }; #define WMI_MGMT_RX_NUM_RSSI 4 struct wmi_mgmt_rx_ev_arg { __le32 channel; __le32 snr; __le32 rate; __le32 phy_mode; __le32 buf_len; __le32 status; /* %WMI_RX_STATUS_ */ struct wmi_mgmt_rx_ext_info ext_info; __le32 rssi[WMI_MGMT_RX_NUM_RSSI]; }; struct wmi_ch_info_ev_arg { __le32 err_code; __le32 freq; __le32 cmd_flags; __le32 noise_floor; __le32 rx_clear_count; __le32 cycle_count; __le32 chan_tx_pwr_range; __le32 chan_tx_pwr_tp; __le32 rx_frame_count; __le32 my_bss_rx_cycle_count; __le32 rx_11b_mode_data_duration; __le32 tx_frame_cnt; __le32 mac_clk_mhz; }; /* From 10.4 firmware, not sure all have the same values. */ enum wmi_vdev_start_status { WMI_VDEV_START_OK = 0, WMI_VDEV_START_CHAN_INVALID, }; struct wmi_vdev_start_ev_arg { __le32 vdev_id; __le32 req_id; __le32 resp_type; /* %WMI_VDEV_RESP_ */ __le32 status; /* See wmi_vdev_start_status enum above */ }; struct wmi_peer_kick_ev_arg { const u8 *mac_addr; }; struct wmi_swba_ev_arg { __le32 vdev_map; struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; }; struct wmi_phyerr_ev_arg { u32 tsf_timestamp; u16 freq1; u16 freq2; u8 rssi_combined; u8 chan_width_mhz; u8 phy_err_code; u16 nf_chains[4]; u32 buf_len; const u8 *buf; u8 hdr_len; }; struct wmi_phyerr_hdr_arg { u32 num_phyerrs; u32 tsf_l32; u32 tsf_u32; u32 buf_len; const void *phyerrs; }; struct wmi_dfs_status_ev_arg { u32 status; }; struct wmi_svc_rdy_ev_arg { __le32 min_tx_power; __le32 max_tx_power; __le32 ht_cap; __le32 vht_cap; __le32 vht_supp_mcs; __le32 sw_ver0; __le32 sw_ver1; __le32 fw_build; __le32 phy_capab; __le32 num_rf_chains; __le32 eeprom_rd; __le32 num_mem_reqs; __le32 low_2ghz_chan; __le32 high_2ghz_chan; __le32 low_5ghz_chan; __le32 high_5ghz_chan; __le32 sys_cap_info; const __le32 *service_map; size_t service_map_len; const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; }; struct wmi_svc_avail_ev_arg { __le32 service_map_ext_len; const __le32 *service_map_ext; }; struct wmi_rdy_ev_arg { __le32 sw_version; __le32 abi_version; __le32 status; const u8 *mac_addr; }; struct wmi_roam_ev_arg { __le32 vdev_id; __le32 reason; __le32 rssi; }; struct wmi_echo_ev_arg { __le32 value; }; struct wmi_pdev_temperature_event { /* temperature value in Celcius degree */ __le32 temperature; } __packed; struct wmi_pdev_bss_chan_info_event { __le32 freq; __le32 noise_floor; __le64 cycle_busy; __le64 cycle_total; __le64 cycle_tx; __le64 cycle_rx; __le64 cycle_rx_bss; __le32 reserved; } __packed; /* WOW structures */ enum wmi_wow_wakeup_event { WOW_BMISS_EVENT = 0, WOW_BETTER_AP_EVENT, WOW_DEAUTH_RECVD_EVENT, WOW_MAGIC_PKT_RECVD_EVENT, WOW_GTK_ERR_EVENT, WOW_FOURWAY_HSHAKE_EVENT, WOW_EAPOL_RECVD_EVENT, WOW_NLO_DETECTED_EVENT, WOW_DISASSOC_RECVD_EVENT, WOW_PATTERN_MATCH_EVENT, WOW_CSA_IE_EVENT, WOW_PROBE_REQ_WPS_IE_EVENT, WOW_AUTH_REQ_EVENT, WOW_ASSOC_REQ_EVENT, WOW_HTT_EVENT, WOW_RA_MATCH_EVENT, WOW_HOST_AUTO_SHUTDOWN_EVENT, WOW_IOAC_MAGIC_EVENT, WOW_IOAC_SHORT_EVENT, WOW_IOAC_EXTEND_EVENT, WOW_IOAC_TIMER_EVENT, WOW_DFS_PHYERR_RADAR_EVENT, WOW_BEACON_EVENT, WOW_CLIENT_KICKOUT_EVENT, WOW_EVENT_MAX, }; #define C2S(x) case x: return #x static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) { switch (ev) { C2S(WOW_BMISS_EVENT); C2S(WOW_BETTER_AP_EVENT); C2S(WOW_DEAUTH_RECVD_EVENT); C2S(WOW_MAGIC_PKT_RECVD_EVENT); C2S(WOW_GTK_ERR_EVENT); C2S(WOW_FOURWAY_HSHAKE_EVENT); C2S(WOW_EAPOL_RECVD_EVENT); C2S(WOW_NLO_DETECTED_EVENT); C2S(WOW_DISASSOC_RECVD_EVENT); C2S(WOW_PATTERN_MATCH_EVENT); C2S(WOW_CSA_IE_EVENT); C2S(WOW_PROBE_REQ_WPS_IE_EVENT); C2S(WOW_AUTH_REQ_EVENT); C2S(WOW_ASSOC_REQ_EVENT); C2S(WOW_HTT_EVENT); C2S(WOW_RA_MATCH_EVENT); C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); C2S(WOW_IOAC_MAGIC_EVENT); C2S(WOW_IOAC_SHORT_EVENT); C2S(WOW_IOAC_EXTEND_EVENT); C2S(WOW_IOAC_TIMER_EVENT); C2S(WOW_DFS_PHYERR_RADAR_EVENT); C2S(WOW_BEACON_EVENT); C2S(WOW_CLIENT_KICKOUT_EVENT); C2S(WOW_EVENT_MAX); default: return NULL; } } enum wmi_wow_wake_reason { WOW_REASON_UNSPECIFIED = -1, WOW_REASON_NLOD = 0, WOW_REASON_AP_ASSOC_LOST, WOW_REASON_LOW_RSSI, WOW_REASON_DEAUTH_RECVD, WOW_REASON_DISASSOC_RECVD, WOW_REASON_GTK_HS_ERR, WOW_REASON_EAP_REQ, WOW_REASON_FOURWAY_HS_RECV, WOW_REASON_TIMER_INTR_RECV, WOW_REASON_PATTERN_MATCH_FOUND, WOW_REASON_RECV_MAGIC_PATTERN, WOW_REASON_P2P_DISC, WOW_REASON_WLAN_HB, WOW_REASON_CSA_EVENT, WOW_REASON_PROBE_REQ_WPS_IE_RECV, WOW_REASON_AUTH_REQ_RECV, WOW_REASON_ASSOC_REQ_RECV, WOW_REASON_HTT_EVENT, WOW_REASON_RA_MATCH, WOW_REASON_HOST_AUTO_SHUTDOWN, WOW_REASON_IOAC_MAGIC_EVENT, WOW_REASON_IOAC_SHORT_EVENT, WOW_REASON_IOAC_EXTEND_EVENT, WOW_REASON_IOAC_TIMER_EVENT, WOW_REASON_ROAM_HO, WOW_REASON_DFS_PHYERR_RADADR_EVENT, WOW_REASON_BEACON_RECV, WOW_REASON_CLIENT_KICKOUT_EVENT, WOW_REASON_DEBUG_TEST = 0xFF, }; static inline const char *wow_reason(enum wmi_wow_wake_reason reason) { switch (reason) { C2S(WOW_REASON_UNSPECIFIED); C2S(WOW_REASON_NLOD); C2S(WOW_REASON_AP_ASSOC_LOST); C2S(WOW_REASON_LOW_RSSI); C2S(WOW_REASON_DEAUTH_RECVD); C2S(WOW_REASON_DISASSOC_RECVD); C2S(WOW_REASON_GTK_HS_ERR); C2S(WOW_REASON_EAP_REQ); C2S(WOW_REASON_FOURWAY_HS_RECV); C2S(WOW_REASON_TIMER_INTR_RECV); C2S(WOW_REASON_PATTERN_MATCH_FOUND); C2S(WOW_REASON_RECV_MAGIC_PATTERN); C2S(WOW_REASON_P2P_DISC); C2S(WOW_REASON_WLAN_HB); C2S(WOW_REASON_CSA_EVENT); C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); C2S(WOW_REASON_AUTH_REQ_RECV); C2S(WOW_REASON_ASSOC_REQ_RECV); C2S(WOW_REASON_HTT_EVENT); C2S(WOW_REASON_RA_MATCH); C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); C2S(WOW_REASON_IOAC_MAGIC_EVENT); C2S(WOW_REASON_IOAC_SHORT_EVENT); C2S(WOW_REASON_IOAC_EXTEND_EVENT); C2S(WOW_REASON_IOAC_TIMER_EVENT); C2S(WOW_REASON_ROAM_HO); C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); C2S(WOW_REASON_BEACON_RECV); C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); C2S(WOW_REASON_DEBUG_TEST); default: return NULL; } } #undef C2S struct wmi_wow_ev_arg { u32 vdev_id; u32 flag; enum wmi_wow_wake_reason wake_reason; u32 data_len; }; #define WOW_MIN_PATTERN_SIZE 1 #define WOW_MAX_PATTERN_SIZE 148 #define WOW_MAX_PKT_OFFSET 128 #define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ sizeof(struct rfc1042_hdr)) #define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ offsetof(struct ieee80211_hdr_3addr, addr1)) enum wmi_tdls_state { WMI_TDLS_DISABLE, WMI_TDLS_ENABLE_PASSIVE, WMI_TDLS_ENABLE_ACTIVE, WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, }; enum wmi_tdls_peer_state { WMI_TDLS_PEER_STATE_PEERING, WMI_TDLS_PEER_STATE_CONNECTED, WMI_TDLS_PEER_STATE_TEARDOWN, }; struct wmi_tdls_peer_update_cmd_arg { u32 vdev_id; enum wmi_tdls_peer_state peer_state; u8 addr[ETH_ALEN]; }; #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 #define WMI_TDLS_PEER_SP_MASK 0x60 #define WMI_TDLS_PEER_SP_LSB 5 enum wmi_tdls_options { WMI_TDLS_OFFCHAN_EN = BIT(0), WMI_TDLS_BUFFER_STA_EN = BIT(1), WMI_TDLS_SLEEP_STA_EN = BIT(2), }; enum { WMI_TDLS_PEER_QOS_AC_VO = BIT(0), WMI_TDLS_PEER_QOS_AC_VI = BIT(1), WMI_TDLS_PEER_QOS_AC_BK = BIT(2), WMI_TDLS_PEER_QOS_AC_BE = BIT(3), }; struct wmi_tdls_peer_capab_arg { u8 peer_uapsd_queues; u8 peer_max_sp; u32 buff_sta_support; u32 off_chan_support; u32 peer_curr_operclass; u32 self_curr_operclass; u32 peer_chan_len; u32 peer_operclass_len; u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; u32 is_peer_responder; u32 pref_offchan_num; u32 pref_offchan_bw; }; struct wmi_10_4_tdls_set_state_cmd { __le32 vdev_id; __le32 state; __le32 notification_interval_ms; __le32 tx_discovery_threshold; __le32 tx_teardown_threshold; __le32 rssi_teardown_threshold; __le32 rssi_delta; __le32 tdls_options; __le32 tdls_peer_traffic_ind_window; __le32 tdls_peer_traffic_response_timeout_ms; __le32 tdls_puapsd_mask; __le32 tdls_puapsd_inactivity_time_ms; __le32 tdls_puapsd_rx_frame_threshold; __le32 teardown_notification_ms; __le32 tdls_peer_kickout_threshold; } __packed; struct wmi_tdls_peer_capabilities { __le32 peer_qos; __le32 buff_sta_support; __le32 off_chan_support; __le32 peer_curr_operclass; __le32 self_curr_operclass; __le32 peer_chan_len; __le32 peer_operclass_len; u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; __le32 is_peer_responder; __le32 pref_offchan_num; __le32 pref_offchan_bw; struct wmi_channel peer_chan_list[1]; } __packed; struct wmi_10_4_tdls_peer_update_cmd { __le32 vdev_id; struct wmi_mac_addr peer_macaddr; __le32 peer_state; __le32 reserved[4]; struct wmi_tdls_peer_capabilities peer_capab; } __packed; enum wmi_tdls_peer_reason { WMI_TDLS_TEARDOWN_REASON_TX, WMI_TDLS_TEARDOWN_REASON_RSSI, WMI_TDLS_TEARDOWN_REASON_SCAN, WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, WMI_TDLS_TEARDOWN_REASON_BAD_PTR, WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, WMI_TDLS_ENTER_BUF_STA, WMI_TDLS_EXIT_BUF_STA, WMI_TDLS_ENTER_BT_BUSY_MODE, WMI_TDLS_EXIT_BT_BUSY_MODE, WMI_TDLS_SCAN_STARTED_EVENT, WMI_TDLS_SCAN_COMPLETED_EVENT, }; enum wmi_tdls_peer_notification { WMI_TDLS_SHOULD_DISCOVER, WMI_TDLS_SHOULD_TEARDOWN, WMI_TDLS_PEER_DISCONNECTED, WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, }; struct wmi_tdls_peer_event { struct wmi_mac_addr peer_macaddr; /* see enum wmi_tdls_peer_notification*/ __le32 peer_status; /* see enum wmi_tdls_peer_reason */ __le32 peer_reason; __le32 vdev_id; } __packed; enum wmi_tid_aggr_control_conf { WMI_TID_CONFIG_AGGR_CONTROL_IGNORE, WMI_TID_CONFIG_AGGR_CONTROL_ENABLE, WMI_TID_CONFIG_AGGR_CONTROL_DISABLE, }; enum wmi_noack_tid_conf { WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY, WMI_PEER_TID_CONFIG_ACK, WMI_PEER_TID_CONFIG_NOACK, }; enum wmi_tid_rate_ctrl_conf { WMI_TID_CONFIG_RATE_CONTROL_IGNORE, WMI_TID_CONFIG_RATE_CONTROL_AUTO, WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE, WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE, }; struct wmi_per_peer_per_tid_cfg_arg { u32 vdev_id; struct wmi_mac_addr peer_macaddr; u32 tid; enum wmi_noack_tid_conf ack_policy; enum wmi_tid_aggr_control_conf aggr_control; u8 rate_ctrl; u32 retry_count; u32 rcode_flags; }; struct wmi_peer_per_tid_cfg_cmd { __le32 vdev_id; struct wmi_mac_addr peer_macaddr; __le32 tid; /* see enum wmi_noack_tid_conf */ __le32 ack_policy; /* see enum wmi_tid_aggr_control_conf */ __le32 aggr_control; /* see enum wmi_tid_rate_ctrl_conf */ __le32 rate_control; __le32 rcode_flags; __le32 retry_count; } __packed; enum wmi_txbf_conf { WMI_TXBF_CONF_UNSUPPORTED, WMI_TXBF_CONF_BEFORE_ASSOC, WMI_TXBF_CONF_AFTER_ASSOC, }; #define WMI_CCA_DETECT_LEVEL_AUTO 0 #define WMI_CCA_DETECT_MARGIN_AUTO 0 struct wmi_pdev_set_adaptive_cca_params { __le32 enable; __le32 cca_detect_level; __le32 cca_detect_margin; } __packed; #define WMI_PNO_MAX_SCHED_SCAN_PLANS 2 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100 #define WMI_PNO_MAX_NETW_CHANNELS 26 #define WMI_PNO_MAX_NETW_CHANNELS_EX 60 #define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID #define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/ #define WMI_PNO_MAX_PB_REQ_SIZE 450 #define WMI_PNO_24G_DEFAULT_CH 1 #define WMI_PNO_5G_DEFAULT_CH 36 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40 #define WMI_PASSIVE_MAX_CHANNEL_TIME 110 /* SSID broadcast type */ enum wmi_SSID_bcast_type { BCAST_UNKNOWN = 0, BCAST_NORMAL = 1, BCAST_HIDDEN = 2, }; struct wmi_network_type { struct wmi_ssid ssid; u32 authentication; u32 encryption; u32 bcast_nw_type; u8 channel_count; u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX]; s32 rssi_threshold; } __packed; struct wmi_pno_scan_req { u8 enable; u8 vdev_id; u8 uc_networks_count; struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS]; u32 fast_scan_period; u32 slow_scan_period; u8 fast_scan_max_cycles; bool do_passive_scan; u32 delay_start_time; u32 active_min_time; u32 active_max_time; u32 passive_min_time; u32 passive_max_time; /* mac address randomization attributes */ u32 enable_pno_scan_randomization; u8 mac_addr[ETH_ALEN]; u8 mac_addr_mask[ETH_ALEN]; } __packed; enum wmi_host_platform_type { WMI_HOST_PLATFORM_HIGH_PERF, WMI_HOST_PLATFORM_LOW_PERF, }; enum wmi_bss_survey_req_type { WMI_BSS_SURVEY_REQ_TYPE_READ = 1, WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, }; struct wmi_pdev_chan_info_req_cmd { __le32 type; __le32 reserved; } __packed; /* bb timing register configurations */ struct wmi_bb_timing_cfg_arg { /* Tx_end to pa off timing */ u32 bb_tx_timing; /* Tx_end to external pa off timing */ u32 bb_xpa_timing; }; struct wmi_pdev_bb_timing_cfg_cmd { /* Tx_end to pa off timing */ __le32 bb_tx_timing; /* Tx_end to external pa off timing */ __le32 bb_xpa_timing; } __packed; struct ath10k; struct ath10k_vif; struct ath10k_fw_stats_pdev; struct ath10k_fw_stats_peer; struct ath10k_fw_stats; int ath10k_wmi_attach(struct ath10k *ar); void ath10k_wmi_detach(struct ath10k *ar); void ath10k_wmi_free_host_mem(struct ath10k *ar); int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); int ath10k_wmi_connect(struct ath10k *ar); struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, struct ath10k_fw_stats_pdev *dst); void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, struct ath10k_fw_stats_pdev *dst); void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, struct ath10k_fw_stats_pdev *dst); void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, struct ath10k_fw_stats_pdev *dst); void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, struct ath10k_fw_stats_peer *dst); void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, struct wmi_host_mem_chunks *chunks); void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, const struct wmi_start_scan_arg *arg); void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, const struct wmi_wmm_params_arg *arg); void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch, const struct wmi_channel_arg *arg); int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb); int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_dfs(struct ath10k *ar, struct wmi_phyerr_ev_arg *phyerr, u64 tsf); void ath10k_wmi_event_spectral_scan(struct ath10k *ar, struct wmi_phyerr_ev_arg *phyerr, u64 tsf); void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb); int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, int left_len, struct wmi_phyerr_ev_arg *arg); void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, struct ath10k_fw_stats *fw_stats, char *buf); void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, struct ath10k_fw_stats *fw_stats, char *buf); size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, struct ath10k_fw_stats *fw_stats, char *buf); int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, enum wmi_vdev_subtype subtype); int ath10k_wmi_barrier(struct ath10k *ar); void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table, u32 num_tx_chain); void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb); #endif /* _WMI_H_ */