# SPDX-License-Identifier: GPL-2.0-only
#
# Wireless LAN device configuration
#

menuconfig WLAN
	bool "Wireless LAN"
	depends on !S390
	depends on NET
	select WIRELESS
	default y
	help
	  This section contains all the pre 802.11 and 802.11 wireless
	  device drivers. For a complete list of drivers and documentation
	  on them refer to the wireless wiki:

	  http://wireless.kernel.org/en/users/Drivers

if WLAN

config WIRELESS_WDS
	bool "mac80211-based legacy WDS support" if EXPERT
	help
	  This option enables the deprecated WDS support, the newer
	  mac80211-based 4-addr AP/client support supersedes it with
	  a much better feature set (HT, VHT, ...)

	  We plan to remove this option and code, so if you find
	  that you have to enable it, please let us know on the
	  linux-wireless@vger.kernel.org mailing list, so we can
	  help you migrate to 4-addr AP/client (or, if it's really
	  necessary, give up on our plan of removing it).

source "drivers/net/wireless/admtek/Kconfig"
source "drivers/net/wireless/ath/Kconfig"
source "drivers/net/wireless/atmel/Kconfig"
source "drivers/net/wireless/broadcom/Kconfig"
source "drivers/net/wireless/cisco/Kconfig"
source "drivers/net/wireless/intel/Kconfig"
source "drivers/net/wireless/intersil/Kconfig"
source "drivers/net/wireless/marvell/Kconfig"
source "drivers/net/wireless/mediatek/Kconfig"
source "drivers/net/wireless/microchip/Kconfig"
source "drivers/net/wireless/ralink/Kconfig"
source "drivers/net/wireless/realtek/Kconfig"
source "drivers/net/wireless/rsi/Kconfig"
source "drivers/net/wireless/st/Kconfig"
source "drivers/net/wireless/ti/Kconfig"
source "drivers/net/wireless/zydas/Kconfig"
source "drivers/net/wireless/quantenna/Kconfig"

config PCMCIA_RAYCS
	tristate "Aviator/Raytheon 2.4GHz wireless support"
	depends on PCMCIA
	select WIRELESS_EXT
	select WEXT_SPY
	select WEXT_PRIV
	help
	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
	  (PC-card) wireless Ethernet networking card to your computer.
	  Please read the file <file:Documentation/networking/ray_cs.rst> for
	  details.

	  To compile this driver as a module, choose M here: the module will be
	  called ray_cs.  If unsure, say N.

config PCMCIA_WL3501
	tristate "Planet WL3501 PCMCIA cards"
	depends on CFG80211 && PCMCIA
	select WIRELESS_EXT
	select WEXT_SPY
	help
	  A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
	  It has basic support for Linux wireless extensions and initial
	  micro support for ethtool.

config MAC80211_HWSIM
	tristate "Simulated radio testing tool for mac80211"
	depends on MAC80211
	help
	  This driver is a developer testing tool that can be used to test
	  IEEE 802.11 networking stack (mac80211) functionality. This is not
	  needed for normal wireless LAN usage and is only for testing. See
	  Documentation/networking/mac80211_hwsim for more information on how
	  to use this tool.

	  To compile this driver as a module, choose M here: the module will be
	  called mac80211_hwsim.  If unsure, say N.

config USB_NET_RNDIS_WLAN
	tristate "Wireless RNDIS USB support"
	depends on USB
	depends on CFG80211
	select USB_NET_DRIVERS
	select USB_USBNET
	select USB_NET_CDCETHER
	select USB_NET_RNDIS_HOST
	help
	  This is a driver for wireless RNDIS devices.
	  These are USB based adapters found in devices such as:

	  Buffalo WLI-U2-KG125S
	  U.S. Robotics USR5421
	  Belkin F5D7051
	  Linksys WUSB54GSv2
	  Linksys WUSB54GSC
	  Asus WL169gE
	  Eminent EM4045
	  BT Voyager 1055
	  Linksys WUSB54GSv1
	  U.S. Robotics USR5420
	  BUFFALO WLI-USB-G54

	  All of these devices are based on Broadcom 4320 chip which is the
	  only wireless RNDIS chip known to date.

	  If you choose to build a module, it'll be called rndis_wlan.

config VIRT_WIFI
	tristate "Wifi wrapper for ethernet drivers"
	depends on CFG80211
	help
	  This option adds support for ethernet connections to appear as if they
	  are wifi connections through a special rtnetlink device.

endif # WLAN