// SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2019 Intel Corporation */ #include "igc.h" #include "igc_hw.h" #include "igc_tsn.h" static bool is_any_launchtime(struct igc_adapter *adapter) { int i; for (i = 0; i < adapter->num_tx_queues; i++) { struct igc_ring *ring = adapter->tx_ring[i]; if (ring->launchtime_enable) return true; } return false; } static bool is_cbs_enabled(struct igc_adapter *adapter) { int i; for (i = 0; i < adapter->num_tx_queues; i++) { struct igc_ring *ring = adapter->tx_ring[i]; if (ring->cbs_enable) return true; } return false; } static unsigned int igc_tsn_new_flags(struct igc_adapter *adapter) { unsigned int new_flags = adapter->flags & ~IGC_FLAG_TSN_ANY_ENABLED; if (adapter->qbv_enable) new_flags |= IGC_FLAG_TSN_QBV_ENABLED; if (is_any_launchtime(adapter)) new_flags |= IGC_FLAG_TSN_QBV_ENABLED; if (is_cbs_enabled(adapter)) new_flags |= IGC_FLAG_TSN_QAV_ENABLED; return new_flags; } void igc_tsn_adjust_txtime_offset(struct igc_adapter *adapter) { struct igc_hw *hw = &adapter->hw; u16 txoffset; if (!is_any_launchtime(adapter)) return; switch (adapter->link_speed) { case SPEED_10: txoffset = IGC_TXOFFSET_SPEED_10; break; case SPEED_100: txoffset = IGC_TXOFFSET_SPEED_100; break; case SPEED_1000: txoffset = IGC_TXOFFSET_SPEED_1000; break; case SPEED_2500: txoffset = IGC_TXOFFSET_SPEED_2500; break; default: txoffset = 0; break; } wr32(IGC_GTXOFFSET, txoffset); } /* Returns the TSN specific registers to their default values after * the adapter is reset. */ static int igc_tsn_disable_offload(struct igc_adapter *adapter) { struct igc_hw *hw = &adapter->hw; u32 tqavctrl; int i; wr32(IGC_GTXOFFSET, 0); wr32(IGC_TXPBS, I225_TXPBSIZE_DEFAULT); wr32(IGC_DTXMXPKTSZ, IGC_DTXMXPKTSZ_DEFAULT); tqavctrl = rd32(IGC_TQAVCTRL); tqavctrl &= ~(IGC_TQAVCTRL_TRANSMIT_MODE_TSN | IGC_TQAVCTRL_ENHANCED_QAV | IGC_TQAVCTRL_FUTSCDDIS); wr32(IGC_TQAVCTRL, tqavctrl); for (i = 0; i < adapter->num_tx_queues; i++) { wr32(IGC_TXQCTL(i), 0); wr32(IGC_STQT(i), 0); wr32(IGC_ENDQT(i), NSEC_PER_SEC); } wr32(IGC_QBVCYCLET_S, 0); wr32(IGC_QBVCYCLET, NSEC_PER_SEC); adapter->flags &= ~IGC_FLAG_TSN_QBV_ENABLED; return 0; } static int igc_tsn_enable_offload(struct igc_adapter *adapter) { struct igc_hw *hw = &adapter->hw; bool tsn_mode_reconfig = false; u32 tqavctrl, baset_l, baset_h; u32 sec, nsec, cycle; ktime_t base_time, systim; int i; wr32(IGC_TSAUXC, 0); wr32(IGC_DTXMXPKTSZ, IGC_DTXMXPKTSZ_TSN); wr32(IGC_TXPBS, IGC_TXPBSIZE_TSN); for (i = 0; i < adapter->num_tx_queues; i++) { struct igc_ring *ring = adapter->tx_ring[i]; u32 txqctl = 0; u16 cbs_value; u32 tqavcc; wr32(IGC_STQT(i), ring->start_time); wr32(IGC_ENDQT(i), ring->end_time); txqctl |= IGC_TXQCTL_STRICT_CYCLE | IGC_TXQCTL_STRICT_END; if (ring->launchtime_enable) txqctl |= IGC_TXQCTL_QUEUE_MODE_LAUNCHT; /* Skip configuring CBS for Q2 and Q3 */ if (i > 1) goto skip_cbs; if (ring->cbs_enable) { if (i == 0) txqctl |= IGC_TXQCTL_QAV_SEL_CBS0; else txqctl |= IGC_TXQCTL_QAV_SEL_CBS1; /* According to i225 datasheet section 7.5.2.7, we * should set the 'idleSlope' field from TQAVCC * register following the equation: * * value = link-speed 0x7736 * BW * 0.2 * ---------- * ----------------- (E1) * 100Mbps 2.5 * * Note that 'link-speed' is in Mbps. * * 'BW' is the percentage bandwidth out of full * link speed which can be found with the * following equation. Note that idleSlope here * is the parameter from this function * which is in kbps. * * BW = idleSlope * ----------------- (E2) * link-speed * 1000 * * That said, we can come up with a generic * equation to calculate the value we should set * it TQAVCC register by replacing 'BW' in E1 by E2. * The resulting equation is: * * value = link-speed * 0x7736 * idleSlope * 0.2 * ------------------------------------- (E3) * 100 * 2.5 * link-speed * 1000 * * 'link-speed' is present in both sides of the * fraction so it is canceled out. The final * equation is the following: * * value = idleSlope * 61036 * ----------------- (E4) * 2500000 * * NOTE: For i225, given the above, we can see * that idleslope is represented in * 40.959433 kbps units by the value at * the TQAVCC register (2.5Gbps / 61036), * which reduces the granularity for * idleslope increments. * * In i225 controller, the sendSlope and loCredit * parameters from CBS are not configurable * by software so we don't do any * 'controller configuration' in respect to * these parameters. */ cbs_value = DIV_ROUND_UP_ULL(ring->idleslope * 61036ULL, 2500000); tqavcc = rd32(IGC_TQAVCC(i)); tqavcc &= ~IGC_TQAVCC_IDLESLOPE_MASK; tqavcc |= cbs_value | IGC_TQAVCC_KEEP_CREDITS; wr32(IGC_TQAVCC(i), tqavcc); wr32(IGC_TQAVHC(i), 0x80000000 + ring->hicredit * 0x7735); } else { /* Disable any CBS for the queue */ txqctl &= ~(IGC_TXQCTL_QAV_SEL_MASK); /* Set idleSlope to zero. */ tqavcc = rd32(IGC_TQAVCC(i)); tqavcc &= ~(IGC_TQAVCC_IDLESLOPE_MASK | IGC_TQAVCC_KEEP_CREDITS); wr32(IGC_TQAVCC(i), tqavcc); /* Set hiCredit to zero. */ wr32(IGC_TQAVHC(i), 0); } skip_cbs: wr32(IGC_TXQCTL(i), txqctl); } tqavctrl = rd32(IGC_TQAVCTRL) & ~IGC_TQAVCTRL_FUTSCDDIS; if (tqavctrl & IGC_TQAVCTRL_TRANSMIT_MODE_TSN) tsn_mode_reconfig = true; tqavctrl |= IGC_TQAVCTRL_TRANSMIT_MODE_TSN | IGC_TQAVCTRL_ENHANCED_QAV; cycle = adapter->cycle_time; base_time = adapter->base_time; nsec = rd32(IGC_SYSTIML); sec = rd32(IGC_SYSTIMH); systim = ktime_set(sec, nsec); if (ktime_compare(systim, base_time) > 0) { s64 n = div64_s64(ktime_sub_ns(systim, base_time), cycle); base_time = ktime_add_ns(base_time, (n + 1) * cycle); /* Increase the counter if scheduling into the past while * Gate Control List (GCL) is running. */ if ((rd32(IGC_BASET_H) || rd32(IGC_BASET_L)) && tsn_mode_reconfig) adapter->qbv_config_change_errors++; } else { /* According to datasheet section 7.5.2.9.3.3, FutScdDis bit * has to be configured before the cycle time and base time. * Tx won't hang if there is a GCL is already running, * so in this case we don't need to set FutScdDis. */ if (igc_is_device_id_i226(hw) && !(rd32(IGC_BASET_H) || rd32(IGC_BASET_L))) tqavctrl |= IGC_TQAVCTRL_FUTSCDDIS; } wr32(IGC_TQAVCTRL, tqavctrl); wr32(IGC_QBVCYCLET_S, cycle); wr32(IGC_QBVCYCLET, cycle); baset_h = div_s64_rem(base_time, NSEC_PER_SEC, &baset_l); wr32(IGC_BASET_H, baset_h); /* In i226, Future base time is only supported when FutScdDis bit * is enabled and only active for re-configuration. * In this case, initialize the base time with zero to create * "re-configuration" scenario then only set the desired base time. */ if (tqavctrl & IGC_TQAVCTRL_FUTSCDDIS) wr32(IGC_BASET_L, 0); wr32(IGC_BASET_L, baset_l); return 0; } int igc_tsn_reset(struct igc_adapter *adapter) { unsigned int new_flags; int err = 0; new_flags = igc_tsn_new_flags(adapter); if (!(new_flags & IGC_FLAG_TSN_ANY_ENABLED)) return igc_tsn_disable_offload(adapter); err = igc_tsn_enable_offload(adapter); if (err < 0) return err; adapter->flags = new_flags; return err; } int igc_tsn_offload_apply(struct igc_adapter *adapter) { struct igc_hw *hw = &adapter->hw; if (netif_running(adapter->netdev) && igc_is_device_id_i225(hw)) { schedule_work(&adapter->reset_task); return 0; } igc_tsn_reset(adapter); return 0; }