// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2007, 2011 Wolfgang Grandegger * Copyright (C) 2012 Stephane Grosjean * * Derived from the PCAN project file driver/src/pcan_pci.c: * * Copyright (C) 2001-2006 PEAK System-Technik GmbH */ #include #include #include #include #include #include #include #include #include #include #include #include "sja1000.h" MODULE_AUTHOR("Stephane Grosjean "); MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards"); MODULE_LICENSE("GPL v2"); #define DRV_NAME "peak_pci" /* FPGA cards FW version registers */ #define PEAK_VER_REG1 0x40 #define PEAK_VER_REG2 0x44 struct peak_pciec_card; struct peak_pci_chan { void __iomem *cfg_base; /* Common for all channels */ struct net_device *prev_dev; /* Chain of network devices */ u16 icr_mask; /* Interrupt mask for fast ack */ struct peak_pciec_card *pciec_card; /* only for PCIeC LEDs */ }; #define PEAK_PCI_CAN_CLOCK (16000000 / 2) #define PEAK_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) #define PEAK_PCI_OCR OCR_TX0_PUSHPULL /* Important PITA registers */ #define PITA_ICR 0x00 /* Interrupt control register */ #define PITA_GPIOICR 0x18 /* GPIO interface control register */ #define PITA_MISC 0x1C /* Miscellaneous register */ #define PEAK_PCI_CFG_SIZE 0x1000 /* Size of the config PCI bar */ #define PEAK_PCI_CHAN_SIZE 0x0400 /* Size used by the channel */ #define PEAK_PCI_VENDOR_ID 0x001C /* The PCI device and vendor IDs */ #define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */ #define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */ #define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */ #define PEAK_CPCI_DEVICE_ID 0x0004 /* for nextgen cPCI slot cards */ #define PEAK_MPCI_DEVICE_ID 0x0005 /* for nextgen miniPCI slot cards */ #define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */ #define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */ #define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */ #define PEAK_PCIE_OEM_ID 0x0009 /* PCAN-PCI Express OEM */ #define PEAK_PCIEC34_DEVICE_ID 0x000A /* PCAN-PCI Express 34 (one channel) */ #define PEAK_PCI_CHAN_MAX 4 static const u16 peak_pci_icr_masks[PEAK_PCI_CHAN_MAX] = { 0x02, 0x01, 0x40, 0x80 }; static const struct pci_device_id peak_pci_tbl[] = { { PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, .driver_data = (kernel_ulong_t)"PCAN-PCI", }, { PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, .driver_data = (kernel_ulong_t)"PCAN-PCI Express", }, { PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, .driver_data = (kernel_ulong_t)"PCAN-miniPCI", }, { PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, .driver_data = (kernel_ulong_t)"PCAN-miniPCIe", }, { PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, .driver_data = (kernel_ulong_t)"PCAN-PC/104-Plus Quad", }, { PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, .driver_data = (kernel_ulong_t)"PCAN-PCI/104-Express", }, { PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, .driver_data = (kernel_ulong_t)"PCAN-cPCI", }, { PEAK_PCI_VENDOR_ID, PEAK_PCIE_OEM_ID, PCI_ANY_ID, PCI_ANY_ID, .driver_data = (kernel_ulong_t)"PCAN-Chip PCIe", }, #ifdef CONFIG_CAN_PEAK_PCIEC { PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, .driver_data = (kernel_ulong_t)"PCAN-ExpressCard", }, { PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, .driver_data = (kernel_ulong_t)"PCAN-ExpressCard 34", }, #endif { /* sentinel */ } }; MODULE_DEVICE_TABLE(pci, peak_pci_tbl); #ifdef CONFIG_CAN_PEAK_PCIEC /* PCAN-ExpressCard needs I2C bit-banging configuration option. */ /* GPIOICR byte access offsets */ #define PITA_GPOUT 0x18 /* GPx output value */ #define PITA_GPIN 0x19 /* GPx input value */ #define PITA_GPOEN 0x1A /* configure GPx as output pin */ /* I2C GP bits */ #define PITA_GPIN_SCL 0x01 /* Serial Clock Line */ #define PITA_GPIN_SDA 0x04 /* Serial DAta line */ #define PCA9553_1_SLAVEADDR (0xC4 >> 1) /* PCA9553 LS0 fields values */ enum { PCA9553_LOW, PCA9553_HIGHZ, PCA9553_PWM0, PCA9553_PWM1 }; /* LEDs control */ #define PCA9553_ON PCA9553_LOW #define PCA9553_OFF PCA9553_HIGHZ #define PCA9553_SLOW PCA9553_PWM0 #define PCA9553_FAST PCA9553_PWM1 #define PCA9553_LED(c) (1 << (c)) #define PCA9553_LED_STATE(s, c) ((s) << ((c) << 1)) #define PCA9553_LED_ON(c) PCA9553_LED_STATE(PCA9553_ON, c) #define PCA9553_LED_OFF(c) PCA9553_LED_STATE(PCA9553_OFF, c) #define PCA9553_LED_SLOW(c) PCA9553_LED_STATE(PCA9553_SLOW, c) #define PCA9553_LED_FAST(c) PCA9553_LED_STATE(PCA9553_FAST, c) #define PCA9553_LED_MASK(c) PCA9553_LED_STATE(0x03, c) #define PCA9553_LED_OFF_ALL (PCA9553_LED_OFF(0) | PCA9553_LED_OFF(1)) #define PCA9553_LS0_INIT 0x40 /* initial value (!= from 0x00) */ struct peak_pciec_chan { struct net_device *netdev; unsigned long prev_rx_bytes; unsigned long prev_tx_bytes; }; struct peak_pciec_card { void __iomem *cfg_base; /* Common for all channels */ void __iomem *reg_base; /* first channel base address */ u8 led_cache; /* leds state cache */ /* PCIExpressCard i2c data */ struct i2c_algo_bit_data i2c_bit; struct i2c_adapter led_chip; struct delayed_work led_work; /* led delayed work */ int chan_count; struct peak_pciec_chan channel[PEAK_PCI_CHAN_MAX]; }; /* "normal" pci register write callback is overloaded for leds control */ static void peak_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val); static inline void pita_set_scl_highz(struct peak_pciec_card *card) { u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SCL; writeb(gp_outen, card->cfg_base + PITA_GPOEN); } static inline void pita_set_sda_highz(struct peak_pciec_card *card) { u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SDA; writeb(gp_outen, card->cfg_base + PITA_GPOEN); } static void peak_pciec_init_pita_gpio(struct peak_pciec_card *card) { /* raise SCL & SDA GPIOs to high-Z */ pita_set_scl_highz(card); pita_set_sda_highz(card); } static void pita_setsda(void *data, int state) { struct peak_pciec_card *card = (struct peak_pciec_card *)data; u8 gp_out, gp_outen; /* set output sda always to 0 */ gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SDA; writeb(gp_out, card->cfg_base + PITA_GPOUT); /* control output sda with GPOEN */ gp_outen = readb(card->cfg_base + PITA_GPOEN); if (state) gp_outen &= ~PITA_GPIN_SDA; else gp_outen |= PITA_GPIN_SDA; writeb(gp_outen, card->cfg_base + PITA_GPOEN); } static void pita_setscl(void *data, int state) { struct peak_pciec_card *card = (struct peak_pciec_card *)data; u8 gp_out, gp_outen; /* set output scl always to 0 */ gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SCL; writeb(gp_out, card->cfg_base + PITA_GPOUT); /* control output scl with GPOEN */ gp_outen = readb(card->cfg_base + PITA_GPOEN); if (state) gp_outen &= ~PITA_GPIN_SCL; else gp_outen |= PITA_GPIN_SCL; writeb(gp_outen, card->cfg_base + PITA_GPOEN); } static int pita_getsda(void *data) { struct peak_pciec_card *card = (struct peak_pciec_card *)data; /* set tristate */ pita_set_sda_highz(card); return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SDA) ? 1 : 0; } static int pita_getscl(void *data) { struct peak_pciec_card *card = (struct peak_pciec_card *)data; /* set tristate */ pita_set_scl_highz(card); return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SCL) ? 1 : 0; } /* write commands to the LED chip though the I2C-bus of the PCAN-PCIeC */ static int peak_pciec_write_pca9553(struct peak_pciec_card *card, u8 offset, u8 data) { u8 buffer[2] = { offset, data }; struct i2c_msg msg = { .addr = PCA9553_1_SLAVEADDR, .len = 2, .buf = buffer, }; int ret; /* cache led mask */ if (offset == 5 && data == card->led_cache) return 0; ret = i2c_transfer(&card->led_chip, &msg, 1); if (ret < 0) return ret; if (offset == 5) card->led_cache = data; return 0; } /* delayed work callback used to control the LEDs */ static void peak_pciec_led_work(struct work_struct *work) { struct peak_pciec_card *card = container_of(work, struct peak_pciec_card, led_work.work); struct net_device *netdev; u8 new_led = card->led_cache; int i, up_count = 0; /* first check what is to do */ for (i = 0; i < card->chan_count; i++) { /* default is: not configured */ new_led &= ~PCA9553_LED_MASK(i); new_led |= PCA9553_LED_ON(i); netdev = card->channel[i].netdev; if (!netdev || !(netdev->flags & IFF_UP)) continue; up_count++; /* no activity (but configured) */ new_led &= ~PCA9553_LED_MASK(i); new_led |= PCA9553_LED_SLOW(i); /* if bytes counters changed, set fast blinking led */ if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) { card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes; new_led &= ~PCA9553_LED_MASK(i); new_led |= PCA9553_LED_FAST(i); } if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) { card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes; new_led &= ~PCA9553_LED_MASK(i); new_led |= PCA9553_LED_FAST(i); } } /* check if LS0 settings changed, only update i2c if so */ peak_pciec_write_pca9553(card, 5, new_led); /* restart timer (except if no more configured channels) */ if (up_count) schedule_delayed_work(&card->led_work, HZ); } /* set LEDs blinking state */ static void peak_pciec_set_leds(struct peak_pciec_card *card, u8 led_mask, u8 s) { u8 new_led = card->led_cache; int i; /* first check what is to do */ for (i = 0; i < card->chan_count; i++) if (led_mask & PCA9553_LED(i)) { new_led &= ~PCA9553_LED_MASK(i); new_led |= PCA9553_LED_STATE(s, i); } /* check if LS0 settings changed, only update i2c if so */ peak_pciec_write_pca9553(card, 5, new_led); } /* start one second delayed work to control LEDs */ static void peak_pciec_start_led_work(struct peak_pciec_card *card) { schedule_delayed_work(&card->led_work, HZ); } /* stop LEDs delayed work */ static void peak_pciec_stop_led_work(struct peak_pciec_card *card) { cancel_delayed_work_sync(&card->led_work); } /* initialize the PCA9553 4-bit I2C-bus LED chip */ static int peak_pciec_init_leds(struct peak_pciec_card *card) { int err; /* prescaler for frequency 0: "SLOW" = 1 Hz = "44" */ err = peak_pciec_write_pca9553(card, 1, 44 / 1); if (err) return err; /* duty cycle 0: 50% */ err = peak_pciec_write_pca9553(card, 2, 0x80); if (err) return err; /* prescaler for frequency 1: "FAST" = 5 Hz */ err = peak_pciec_write_pca9553(card, 3, 44 / 5); if (err) return err; /* duty cycle 1: 50% */ err = peak_pciec_write_pca9553(card, 4, 0x80); if (err) return err; /* switch LEDs to initial state */ return peak_pciec_write_pca9553(card, 5, PCA9553_LS0_INIT); } /* restore LEDs state to off peak_pciec_leds_exit */ static void peak_pciec_leds_exit(struct peak_pciec_card *card) { /* switch LEDs to off */ peak_pciec_write_pca9553(card, 5, PCA9553_LED_OFF_ALL); } /* normal write sja1000 register method overloaded to catch when controller * is started or stopped, to control leds */ static void peak_pciec_write_reg(const struct sja1000_priv *priv, int port, u8 val) { struct peak_pci_chan *chan = priv->priv; struct peak_pciec_card *card = chan->pciec_card; int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE; /* sja1000 register changes control the leds state */ if (port == SJA1000_MOD) switch (val) { case MOD_RM: /* Reset Mode: set led on */ peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_ON); break; case 0x00: /* Normal Mode: led slow blinking and start led timer */ peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_SLOW); peak_pciec_start_led_work(card); break; default: break; } /* call base function */ peak_pci_write_reg(priv, port, val); } static const struct i2c_algo_bit_data peak_pciec_i2c_bit_ops = { .setsda = pita_setsda, .setscl = pita_setscl, .getsda = pita_getsda, .getscl = pita_getscl, .udelay = 10, .timeout = HZ, }; static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) { struct sja1000_priv *priv = netdev_priv(dev); struct peak_pci_chan *chan = priv->priv; struct peak_pciec_card *card; int err; /* copy i2c object address from 1st channel */ if (chan->prev_dev) { struct sja1000_priv *prev_priv = netdev_priv(chan->prev_dev); struct peak_pci_chan *prev_chan = prev_priv->priv; card = prev_chan->pciec_card; if (!card) return -ENODEV; /* channel is the first one: do the init part */ } else { /* create the bit banging I2C adapter structure */ card = kzalloc(sizeof(*card), GFP_KERNEL); if (!card) return -ENOMEM; card->cfg_base = chan->cfg_base; card->reg_base = priv->reg_base; card->led_chip.owner = THIS_MODULE; card->led_chip.dev.parent = &pdev->dev; card->led_chip.algo_data = &card->i2c_bit; strncpy(card->led_chip.name, "peak_i2c", sizeof(card->led_chip.name)); card->i2c_bit = peak_pciec_i2c_bit_ops; card->i2c_bit.udelay = 10; card->i2c_bit.timeout = HZ; card->i2c_bit.data = card; peak_pciec_init_pita_gpio(card); err = i2c_bit_add_bus(&card->led_chip); if (err) { dev_err(&pdev->dev, "i2c init failed\n"); goto pciec_init_err_1; } err = peak_pciec_init_leds(card); if (err) { dev_err(&pdev->dev, "leds hardware init failed\n"); goto pciec_init_err_2; } INIT_DELAYED_WORK(&card->led_work, peak_pciec_led_work); /* PCAN-ExpressCard needs its own callback for leds */ priv->write_reg = peak_pciec_write_reg; } chan->pciec_card = card; card->channel[card->chan_count++].netdev = dev; return 0; pciec_init_err_2: i2c_del_adapter(&card->led_chip); pciec_init_err_1: peak_pciec_init_pita_gpio(card); kfree(card); return err; } static void peak_pciec_remove(struct peak_pciec_card *card) { peak_pciec_stop_led_work(card); peak_pciec_leds_exit(card); i2c_del_adapter(&card->led_chip); peak_pciec_init_pita_gpio(card); kfree(card); } #else /* CONFIG_CAN_PEAK_PCIEC */ /* Placebo functions when PCAN-ExpressCard support is not selected */ static inline int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev) { return -ENODEV; } static inline void peak_pciec_remove(struct peak_pciec_card *card) { } #endif /* CONFIG_CAN_PEAK_PCIEC */ static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port) { return readb(priv->reg_base + (port << 2)); } static void peak_pci_write_reg(const struct sja1000_priv *priv, int port, u8 val) { writeb(val, priv->reg_base + (port << 2)); } static void peak_pci_post_irq(const struct sja1000_priv *priv) { struct peak_pci_chan *chan = priv->priv; u16 icr; /* Select and clear in PITA stored interrupt */ icr = readw(chan->cfg_base + PITA_ICR); if (icr & chan->icr_mask) writew(chan->icr_mask, chan->cfg_base + PITA_ICR); } static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct sja1000_priv *priv; struct peak_pci_chan *chan; struct net_device *dev, *prev_dev; void __iomem *cfg_base, *reg_base; u16 sub_sys_id, icr; int i, err, channels; char fw_str[14] = ""; err = pci_enable_device(pdev); if (err) return err; err = pci_request_regions(pdev, DRV_NAME); if (err) goto failure_disable_pci; err = pci_read_config_word(pdev, 0x2e, &sub_sys_id); if (err) goto failure_release_regions; dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n", pdev->vendor, pdev->device, sub_sys_id); err = pci_write_config_word(pdev, 0x44, 0); if (err) goto failure_release_regions; if (sub_sys_id >= 12) channels = 4; else if (sub_sys_id >= 10) channels = 3; else if (sub_sys_id >= 4) channels = 2; else channels = 1; cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE); if (!cfg_base) { dev_err(&pdev->dev, "failed to map PCI resource #0\n"); err = -ENOMEM; goto failure_release_regions; } reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels); if (!reg_base) { dev_err(&pdev->dev, "failed to map PCI resource #1\n"); err = -ENOMEM; goto failure_unmap_cfg_base; } /* Set GPIO control register */ writew(0x0005, cfg_base + PITA_GPIOICR + 2); /* Enable all channels of this card */ writeb(0x00, cfg_base + PITA_GPIOICR); /* Toggle reset */ writeb(0x05, cfg_base + PITA_MISC + 3); usleep_range(5000, 6000); /* Leave parport mux mode */ writeb(0x04, cfg_base + PITA_MISC + 3); /* FPGA equipped card if not 0 */ if (readl(cfg_base + PEAK_VER_REG1)) { /* FPGA card: display version of the running firmware */ u32 fw_ver = readl(cfg_base + PEAK_VER_REG2); snprintf(fw_str, sizeof(fw_str), " FW v%u.%u.%u", (fw_ver >> 12) & 0xf, (fw_ver >> 8) & 0xf, (fw_ver >> 4) & 0xf); } /* Display commercial name (and, eventually, FW version) of the card */ dev_info(&pdev->dev, "%ux CAN %s%s\n", channels, (const char *)ent->driver_data, fw_str); icr = readw(cfg_base + PITA_ICR + 2); for (i = 0; i < channels; i++) { dev = alloc_sja1000dev(sizeof(struct peak_pci_chan)); if (!dev) { err = -ENOMEM; goto failure_remove_channels; } priv = netdev_priv(dev); chan = priv->priv; chan->cfg_base = cfg_base; priv->reg_base = reg_base + i * PEAK_PCI_CHAN_SIZE; priv->read_reg = peak_pci_read_reg; priv->write_reg = peak_pci_write_reg; priv->post_irq = peak_pci_post_irq; priv->can.clock.freq = PEAK_PCI_CAN_CLOCK; priv->ocr = PEAK_PCI_OCR; priv->cdr = PEAK_PCI_CDR; /* Neither a slave nor a single device distributes the clock */ if (channels == 1 || i > 0) priv->cdr |= CDR_CLK_OFF; /* Setup interrupt handling */ priv->irq_flags = IRQF_SHARED; dev->irq = pdev->irq; chan->icr_mask = peak_pci_icr_masks[i]; icr |= chan->icr_mask; SET_NETDEV_DEV(dev, &pdev->dev); dev->dev_id = i; /* Create chain of SJA1000 devices */ chan->prev_dev = pci_get_drvdata(pdev); pci_set_drvdata(pdev, dev); /* PCAN-ExpressCard needs some additional i2c init. * This must be done *before* register_sja1000dev() but * *after* devices linkage */ if (pdev->device == PEAK_PCIEC_DEVICE_ID || pdev->device == PEAK_PCIEC34_DEVICE_ID) { err = peak_pciec_probe(pdev, dev); if (err) { dev_err(&pdev->dev, "failed to probe device (err %d)\n", err); goto failure_free_dev; } } err = register_sja1000dev(dev); if (err) { dev_err(&pdev->dev, "failed to register device\n"); goto failure_free_dev; } dev_info(&pdev->dev, "%s at reg_base=0x%p cfg_base=0x%p irq=%d\n", dev->name, priv->reg_base, chan->cfg_base, dev->irq); } /* Enable interrupts */ writew(icr, cfg_base + PITA_ICR + 2); return 0; failure_free_dev: pci_set_drvdata(pdev, chan->prev_dev); free_sja1000dev(dev); failure_remove_channels: /* Disable interrupts */ writew(0x0, cfg_base + PITA_ICR + 2); chan = NULL; for (dev = pci_get_drvdata(pdev); dev; dev = prev_dev) { priv = netdev_priv(dev); chan = priv->priv; prev_dev = chan->prev_dev; unregister_sja1000dev(dev); free_sja1000dev(dev); } /* free any PCIeC resources too */ if (chan && chan->pciec_card) peak_pciec_remove(chan->pciec_card); pci_iounmap(pdev, reg_base); failure_unmap_cfg_base: pci_iounmap(pdev, cfg_base); failure_release_regions: pci_release_regions(pdev); failure_disable_pci: pci_disable_device(pdev); /* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while * the probe() function must return a negative errno in case of failure * (err is unchanged if negative) */ return pcibios_err_to_errno(err); } static void peak_pci_remove(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); /* Last device */ struct sja1000_priv *priv = netdev_priv(dev); struct peak_pci_chan *chan = priv->priv; void __iomem *cfg_base = chan->cfg_base; void __iomem *reg_base = priv->reg_base; /* Disable interrupts */ writew(0x0, cfg_base + PITA_ICR + 2); /* Loop over all registered devices */ while (1) { struct net_device *prev_dev = chan->prev_dev; dev_info(&pdev->dev, "removing device %s\n", dev->name); unregister_sja1000dev(dev); free_sja1000dev(dev); dev = prev_dev; if (!dev) { /* do that only for first channel */ if (chan->pciec_card) peak_pciec_remove(chan->pciec_card); break; } priv = netdev_priv(dev); chan = priv->priv; } pci_iounmap(pdev, reg_base); pci_iounmap(pdev, cfg_base); pci_release_regions(pdev); pci_disable_device(pdev); } static struct pci_driver peak_pci_driver = { .name = DRV_NAME, .id_table = peak_pci_tbl, .probe = peak_pci_probe, .remove = peak_pci_remove, }; module_pci_driver(peak_pci_driver);