/* * Driver for the Auvitek USB bridge * * Copyright (c) 2008 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. */ #include "au0828.h" #include "au8522.h" #include #include #include #include #include /* Due to enum tuner_pad_index */ #include /* * 1 = General debug messages * 2 = USB handling * 4 = I2C related * 8 = Bridge related * 16 = IR related */ int au0828_debug; module_param_named(debug, au0828_debug, int, 0644); MODULE_PARM_DESC(debug, "set debug bitmask: 1=general, 2=USB, 4=I2C, 8=bridge, 16=IR"); static unsigned int disable_usb_speed_check; module_param(disable_usb_speed_check, int, 0444); MODULE_PARM_DESC(disable_usb_speed_check, "override min bandwidth requirement of 480M bps"); #define _AU0828_BULKPIPE 0x03 #define _BULKPIPESIZE 0xffff static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, u16 index); static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value, u16 index, unsigned char *cp, u16 size); /* USB Direction */ #define CMD_REQUEST_IN 0x00 #define CMD_REQUEST_OUT 0x01 u32 au0828_readreg(struct au0828_dev *dev, u16 reg) { u8 result = 0; recv_control_msg(dev, CMD_REQUEST_IN, 0, reg, &result, 1); dprintk(8, "%s(0x%04x) = 0x%02x\n", __func__, reg, result); return result; } u32 au0828_writereg(struct au0828_dev *dev, u16 reg, u32 val) { dprintk(8, "%s(0x%04x, 0x%02x)\n", __func__, reg, val); return send_control_msg(dev, CMD_REQUEST_OUT, val, reg); } static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, u16 index) { int status = -ENODEV; if (dev->usbdev) { /* cp must be memory that has been allocated by kmalloc */ status = usb_control_msg(dev->usbdev, usb_sndctrlpipe(dev->usbdev, 0), request, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, NULL, 0, 1000); status = min(status, 0); if (status < 0) { pr_err("%s() Failed sending control message, error %d.\n", __func__, status); } } return status; } static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value, u16 index, unsigned char *cp, u16 size) { int status = -ENODEV; mutex_lock(&dev->mutex); if (dev->usbdev) { status = usb_control_msg(dev->usbdev, usb_rcvctrlpipe(dev->usbdev, 0), request, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, dev->ctrlmsg, size, 1000); status = min(status, 0); if (status < 0) { pr_err("%s() Failed receiving control message, error %d.\n", __func__, status); } /* the host controller requires heap allocated memory, which is why we didn't just pass "cp" into usb_control_msg */ memcpy(cp, dev->ctrlmsg, size); } mutex_unlock(&dev->mutex); return status; } #ifdef CONFIG_MEDIA_CONTROLLER static void au0828_media_graph_notify(struct media_entity *new, void *notify_data); #endif static void au0828_unregister_media_device(struct au0828_dev *dev) { #ifdef CONFIG_MEDIA_CONTROLLER struct media_device *mdev = dev->media_dev; struct media_entity_notify *notify, *nextp; if (!mdev || !media_devnode_is_registered(mdev->devnode)) return; /* Remove au0828 entity_notify callbacks */ list_for_each_entry_safe(notify, nextp, &mdev->entity_notify, list) { if (notify->notify != au0828_media_graph_notify) continue; media_device_unregister_entity_notify(mdev, notify); } /* clear enable_source, disable_source */ mutex_lock(&mdev->graph_mutex); dev->media_dev->source_priv = NULL; dev->media_dev->enable_source = NULL; dev->media_dev->disable_source = NULL; mutex_unlock(&mdev->graph_mutex); media_device_unregister(dev->media_dev); media_device_cleanup(dev->media_dev); kfree(dev->media_dev); dev->media_dev = NULL; #endif } void au0828_usb_release(struct au0828_dev *dev) { au0828_unregister_media_device(dev); /* I2C */ au0828_i2c_unregister(dev); kfree(dev); } static void au0828_usb_disconnect(struct usb_interface *interface) { struct au0828_dev *dev = usb_get_intfdata(interface); dprintk(1, "%s()\n", __func__); /* there is a small window after disconnect, before dev->usbdev is NULL, for poll (e.g: IR) try to access the device and fill the dmesg with error messages. Set the status so poll routines can check and avoid access after disconnect. */ set_bit(DEV_DISCONNECTED, &dev->dev_state); au0828_rc_unregister(dev); /* Digital TV */ au0828_dvb_unregister(dev); usb_set_intfdata(interface, NULL); mutex_lock(&dev->mutex); dev->usbdev = NULL; mutex_unlock(&dev->mutex); if (au0828_analog_unregister(dev)) { /* * No need to call au0828_usb_release() if V4L2 is enabled, * as this is already called via au0828_usb_v4l2_release() */ return; } au0828_usb_release(dev); } static int au0828_media_device_init(struct au0828_dev *dev, struct usb_device *udev) { #ifdef CONFIG_MEDIA_CONTROLLER struct media_device *mdev; mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); if (!mdev) return -ENOMEM; /* check if media device is already initialized */ if (!mdev->dev) media_device_usb_init(mdev, udev, udev->product); dev->media_dev = mdev; #endif return 0; } #ifdef CONFIG_MEDIA_CONTROLLER static void au0828_media_graph_notify(struct media_entity *new, void *notify_data) { struct au0828_dev *dev = (struct au0828_dev *) notify_data; int ret; struct media_entity *entity, *mixer = NULL, *decoder = NULL; if (!new) { /* * Called during au0828 probe time to connect * entities that were created prior to registering * the notify handler. Find mixer and decoder. */ media_device_for_each_entity(entity, dev->media_dev) { if (entity->function == MEDIA_ENT_F_AUDIO_MIXER) mixer = entity; else if (entity->function == MEDIA_ENT_F_ATV_DECODER) decoder = entity; } goto create_link; } switch (new->function) { case MEDIA_ENT_F_AUDIO_MIXER: mixer = new; if (dev->decoder) decoder = dev->decoder; break; case MEDIA_ENT_F_ATV_DECODER: /* In case, Mixer is added first, find mixer and create link */ media_device_for_each_entity(entity, dev->media_dev) { if (entity->function == MEDIA_ENT_F_AUDIO_MIXER) mixer = entity; } decoder = new; break; default: break; } create_link: if (decoder && mixer) { ret = media_get_pad_index(decoder, false, PAD_SIGNAL_AUDIO); if (ret >= 0) ret = media_create_pad_link(decoder, ret, mixer, 0, MEDIA_LNK_FL_ENABLED); if (ret < 0) dev_err(&dev->usbdev->dev, "Mixer Pad Link Create Error: %d\n", ret); } } /* Callers should hold graph_mutex */ static int au0828_enable_source(struct media_entity *entity, struct media_pipeline *pipe) { struct media_entity *source, *find_source; struct media_entity *sink; struct media_link *link, *found_link = NULL; int ret = 0; struct media_device *mdev = entity->graph_obj.mdev; struct au0828_dev *dev; if (!mdev) return -ENODEV; dev = mdev->source_priv; /* * For Audio and V4L2 entity, find the link to which decoder * is the sink. Look for an active link between decoder and * source (tuner/s-video/Composite), if one exists, nothing * to do. If not, look for any active links between source * and any other entity. If one exists, source is busy. If * source is free, setup link and start pipeline from source. * For DVB FE entity, the source for the link is the tuner. * Check if tuner is available and setup link and start * pipeline. */ if (entity->function == MEDIA_ENT_F_DTV_DEMOD) { sink = entity; find_source = dev->tuner; } else { /* Analog isn't configured or register failed */ if (!dev->decoder) { ret = -ENODEV; goto end; } sink = dev->decoder; /* * Default input is tuner and default input_type * is AU0828_VMUX_TELEVISION. * FIXME: * There is a problem when s_input is called to * change the default input. s_input will try to * enable_source before attempting to change the * input on the device, and will end up enabling * default source which is tuner. * * Additional logic is necessary in au0828 * to detect that the input has changed and * enable the right source. */ if (dev->input_type == AU0828_VMUX_TELEVISION) find_source = dev->tuner; else if (dev->input_type == AU0828_VMUX_SVIDEO || dev->input_type == AU0828_VMUX_COMPOSITE) find_source = &dev->input_ent[dev->input_type]; else { /* unknown input - let user select input */ ret = 0; goto end; } } /* Is an active link between sink and source */ if (dev->active_link) { /* * If DVB is using the tuner and calling entity is * audio/video, the following check will be false, * since sink is different. Result is Busy. */ if (dev->active_link->sink->entity == sink && dev->active_link->source->entity == find_source) { /* * Either ALSA or Video own tuner. sink is * the same for both. Prevent Video stepping * on ALSA when ALSA owns the source. */ if (dev->active_link_owner != entity && dev->active_link_owner->function == MEDIA_ENT_F_AUDIO_CAPTURE) { pr_debug("ALSA has the tuner\n"); ret = -EBUSY; goto end; } ret = 0; goto end; } else { ret = -EBUSY; goto end; } } list_for_each_entry(link, &sink->links, list) { /* Check sink, and source */ if (link->sink->entity == sink && link->source->entity == find_source) { found_link = link; break; } } if (!found_link) { ret = -ENODEV; goto end; } /* activate link between source and sink and start pipeline */ source = found_link->source->entity; ret = __media_entity_setup_link(found_link, MEDIA_LNK_FL_ENABLED); if (ret) { pr_err("Activate tuner link %s->%s. Error %d\n", source->name, sink->name, ret); goto end; } ret = __media_pipeline_start(entity, pipe); if (ret) { pr_err("Start Pipeline: %s->%s Error %d\n", source->name, entity->name, ret); ret = __media_entity_setup_link(found_link, 0); pr_err("Deactivate link Error %d\n", ret); goto end; } /* * save active link and active link owner to avoid audio * deactivating video owned link from disable_source and * vice versa */ dev->active_link = found_link; dev->active_link_owner = entity; dev->active_source = source; dev->active_sink = sink; pr_debug("Enabled Source: %s->%s->%s Ret %d\n", dev->active_source->name, dev->active_sink->name, dev->active_link_owner->name, ret); end: pr_debug("au0828_enable_source() end %s %d %d\n", entity->name, entity->function, ret); return ret; } /* Callers should hold graph_mutex */ static void au0828_disable_source(struct media_entity *entity) { int ret = 0; struct media_device *mdev = entity->graph_obj.mdev; struct au0828_dev *dev; if (!mdev) return; dev = mdev->source_priv; if (!dev->active_link) return; /* link is active - stop pipeline from source (tuner) */ if (dev->active_link->sink->entity == dev->active_sink && dev->active_link->source->entity == dev->active_source) { /* * prevent video from deactivating link when audio * has active pipeline */ if (dev->active_link_owner != entity) return; __media_pipeline_stop(entity); ret = __media_entity_setup_link(dev->active_link, 0); if (ret) pr_err("Deactivate link Error %d\n", ret); pr_debug("Disabled Source: %s->%s->%s Ret %d\n", dev->active_source->name, dev->active_sink->name, dev->active_link_owner->name, ret); dev->active_link = NULL; dev->active_link_owner = NULL; dev->active_source = NULL; dev->active_sink = NULL; } } #endif static int au0828_media_device_register(struct au0828_dev *dev, struct usb_device *udev) { #ifdef CONFIG_MEDIA_CONTROLLER int ret; struct media_entity *entity, *demod = NULL; struct media_link *link; if (!dev->media_dev) return 0; if (!media_devnode_is_registered(dev->media_dev->devnode)) { /* register media device */ ret = media_device_register(dev->media_dev); if (ret) { dev_err(&udev->dev, "Media Device Register Error: %d\n", ret); return ret; } } else { /* * Call au0828_media_graph_notify() to connect * audio graph to our graph. In this case, audio * driver registered the device and there is no * entity_notify to be called when new entities * are added. Invoke it now. */ au0828_media_graph_notify(NULL, (void *) dev); } /* * Find tuner, decoder and demod. * * The tuner and decoder should be cached, as they'll be used by * au0828_enable_source. * * It also needs to disable the link between tuner and * decoder/demod, to avoid disable step when tuner is requested * by video or audio. Note that this step can't be done until dvb * graph is created during dvb register. */ media_device_for_each_entity(entity, dev->media_dev) { switch (entity->function) { case MEDIA_ENT_F_TUNER: dev->tuner = entity; break; case MEDIA_ENT_F_ATV_DECODER: dev->decoder = entity; break; case MEDIA_ENT_F_DTV_DEMOD: demod = entity; break; } } /* Disable link between tuner->demod and/or tuner->decoder */ if (dev->tuner) { list_for_each_entry(link, &dev->tuner->links, list) { if (demod && link->sink->entity == demod) media_entity_setup_link(link, 0); if (dev->decoder && link->sink->entity == dev->decoder) media_entity_setup_link(link, 0); } } /* register entity_notify callback */ dev->entity_notify.notify_data = (void *) dev; dev->entity_notify.notify = (void *) au0828_media_graph_notify; ret = media_device_register_entity_notify(dev->media_dev, &dev->entity_notify); if (ret) { dev_err(&udev->dev, "Media Device register entity_notify Error: %d\n", ret); return ret; } /* set enable_source */ mutex_lock(&dev->media_dev->graph_mutex); dev->media_dev->source_priv = (void *) dev; dev->media_dev->enable_source = au0828_enable_source; dev->media_dev->disable_source = au0828_disable_source; mutex_unlock(&dev->media_dev->graph_mutex); #endif return 0; } static int au0828_usb_probe(struct usb_interface *interface, const struct usb_device_id *id) { int ifnum; int retval = 0; struct au0828_dev *dev; struct usb_device *usbdev = interface_to_usbdev(interface); ifnum = interface->altsetting->desc.bInterfaceNumber; if (ifnum != 0) return -ENODEV; dprintk(1, "%s() vendor id 0x%x device id 0x%x ifnum:%d\n", __func__, le16_to_cpu(usbdev->descriptor.idVendor), le16_to_cpu(usbdev->descriptor.idProduct), ifnum); /* * Make sure we have 480 Mbps of bandwidth, otherwise things like * video stream wouldn't likely work, since 12 Mbps is generally * not enough even for most Digital TV streams. */ if (usbdev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { pr_err("au0828: Device initialization failed.\n"); pr_err("au0828: Device must be connected to a high-speed USB 2.0 port.\n"); return -ENODEV; } dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { pr_err("%s() Unable to allocate memory\n", __func__); return -ENOMEM; } mutex_init(&dev->lock); mutex_lock(&dev->lock); mutex_init(&dev->mutex); mutex_init(&dev->dvb.lock); dev->usbdev = usbdev; dev->boardnr = id->driver_info; dev->board = au0828_boards[dev->boardnr]; /* Initialize the media controller */ retval = au0828_media_device_init(dev, usbdev); if (retval) { pr_err("%s() au0828_media_device_init failed\n", __func__); mutex_unlock(&dev->lock); kfree(dev); return retval; } retval = au0828_v4l2_device_register(interface, dev); if (retval) { au0828_usb_v4l2_media_release(dev); mutex_unlock(&dev->lock); kfree(dev); return retval; } /* Power Up the bridge */ au0828_write(dev, REG_600, 1 << 4); /* Bring up the GPIO's and supporting devices */ au0828_gpio_setup(dev); /* I2C */ au0828_i2c_register(dev); /* Setup */ au0828_card_setup(dev); /* Analog TV */ retval = au0828_analog_register(dev, interface); if (retval) { pr_err("%s() au0828_analog_register failed to register on V4L2\n", __func__); mutex_unlock(&dev->lock); goto done; } /* Digital TV */ retval = au0828_dvb_register(dev); if (retval) pr_err("%s() au0828_dvb_register failed\n", __func__); /* Remote controller */ au0828_rc_register(dev); /* * Store the pointer to the au0828_dev so it can be accessed in * au0828_usb_disconnect */ usb_set_intfdata(interface, dev); pr_info("Registered device AU0828 [%s]\n", dev->board.name == NULL ? "Unset" : dev->board.name); mutex_unlock(&dev->lock); retval = au0828_media_device_register(dev, usbdev); done: if (retval < 0) au0828_usb_disconnect(interface); return retval; } static int au0828_suspend(struct usb_interface *interface, pm_message_t message) { struct au0828_dev *dev = usb_get_intfdata(interface); if (!dev) return 0; pr_info("Suspend\n"); au0828_rc_suspend(dev); au0828_v4l2_suspend(dev); au0828_dvb_suspend(dev); /* FIXME: should suspend also ATV/DTV */ return 0; } static int au0828_resume(struct usb_interface *interface) { struct au0828_dev *dev = usb_get_intfdata(interface); if (!dev) return 0; pr_info("Resume\n"); /* Power Up the bridge */ au0828_write(dev, REG_600, 1 << 4); /* Bring up the GPIO's and supporting devices */ au0828_gpio_setup(dev); au0828_rc_resume(dev); au0828_v4l2_resume(dev); au0828_dvb_resume(dev); /* FIXME: should resume also ATV/DTV */ return 0; } static struct usb_driver au0828_usb_driver = { .name = KBUILD_MODNAME, .probe = au0828_usb_probe, .disconnect = au0828_usb_disconnect, .id_table = au0828_usb_id_table, .suspend = au0828_suspend, .resume = au0828_resume, .reset_resume = au0828_resume, }; static int __init au0828_init(void) { int ret; if (au0828_debug & 1) pr_info("%s() Debugging is enabled\n", __func__); if (au0828_debug & 2) pr_info("%s() USB Debugging is enabled\n", __func__); if (au0828_debug & 4) pr_info("%s() I2C Debugging is enabled\n", __func__); if (au0828_debug & 8) pr_info("%s() Bridge Debugging is enabled\n", __func__); if (au0828_debug & 16) pr_info("%s() IR Debugging is enabled\n", __func__); pr_info("au0828 driver loaded\n"); ret = usb_register(&au0828_usb_driver); if (ret) pr_err("usb_register failed, error = %d\n", ret); return ret; } static void __exit au0828_exit(void) { usb_deregister(&au0828_usb_driver); } module_init(au0828_init); module_exit(au0828_exit); MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products"); MODULE_AUTHOR("Steven Toth "); MODULE_LICENSE("GPL"); MODULE_VERSION("0.0.3");