// SPDX-License-Identifier: GPL-2.0-or-later /* * cx18 init/start/stop/exit stream functions * * Derived from ivtv-streams.c * * Copyright (C) 2007 Hans Verkuil * Copyright (C) 2008 Andy Walls */ #include "cx18-driver.h" #include "cx18-io.h" #include "cx18-fileops.h" #include "cx18-mailbox.h" #include "cx18-i2c.h" #include "cx18-queue.h" #include "cx18-ioctl.h" #include "cx18-streams.h" #include "cx18-cards.h" #include "cx18-scb.h" #include "cx18-dvb.h" #define CX18_DSP0_INTERRUPT_MASK 0xd0004C static const struct v4l2_file_operations cx18_v4l2_enc_fops = { .owner = THIS_MODULE, .read = cx18_v4l2_read, .open = cx18_v4l2_open, .unlocked_ioctl = video_ioctl2, .release = cx18_v4l2_close, .poll = cx18_v4l2_enc_poll, }; static const struct v4l2_file_operations cx18_v4l2_enc_yuv_fops = { .owner = THIS_MODULE, .open = cx18_v4l2_open, .unlocked_ioctl = video_ioctl2, .release = cx18_v4l2_close, .poll = vb2_fop_poll, .read = vb2_fop_read, .mmap = vb2_fop_mmap, }; /* offset from 0 to register ts v4l2 minors on */ #define CX18_V4L2_ENC_TS_OFFSET 16 /* offset from 0 to register pcm v4l2 minors on */ #define CX18_V4L2_ENC_PCM_OFFSET 24 /* offset from 0 to register yuv v4l2 minors on */ #define CX18_V4L2_ENC_YUV_OFFSET 32 static struct { const char *name; int vfl_type; int num_offset; int dma; u32 caps; } cx18_stream_info[] = { { /* CX18_ENC_STREAM_TYPE_MPG */ "encoder MPEG", VFL_TYPE_VIDEO, 0, DMA_FROM_DEVICE, V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | V4L2_CAP_AUDIO | V4L2_CAP_TUNER }, { /* CX18_ENC_STREAM_TYPE_TS */ "TS", VFL_TYPE_VIDEO, -1, DMA_FROM_DEVICE, }, { /* CX18_ENC_STREAM_TYPE_YUV */ "encoder YUV", VFL_TYPE_VIDEO, CX18_V4L2_ENC_YUV_OFFSET, DMA_FROM_DEVICE, V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | V4L2_CAP_AUDIO | V4L2_CAP_TUNER }, { /* CX18_ENC_STREAM_TYPE_VBI */ "encoder VBI", VFL_TYPE_VBI, 0, DMA_FROM_DEVICE, V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE | V4L2_CAP_READWRITE | V4L2_CAP_AUDIO | V4L2_CAP_TUNER }, { /* CX18_ENC_STREAM_TYPE_PCM */ "encoder PCM audio", VFL_TYPE_VIDEO, CX18_V4L2_ENC_PCM_OFFSET, DMA_FROM_DEVICE, V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE, }, { /* CX18_ENC_STREAM_TYPE_IDX */ "encoder IDX", VFL_TYPE_VIDEO, -1, DMA_FROM_DEVICE, }, { /* CX18_ENC_STREAM_TYPE_RAD */ "encoder radio", VFL_TYPE_RADIO, 0, DMA_NONE, V4L2_CAP_RADIO | V4L2_CAP_TUNER }, }; static int cx18_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, unsigned int *nplanes, unsigned int sizes[], struct device *alloc_devs[]) { struct cx18_stream *s = vb2_get_drv_priv(vq); struct cx18 *cx = s->cx; unsigned int szimage; /* * HM12 YUV size is (Y=(h*720) + UV=(h*(720/2))) * UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */ if (s->pixelformat == V4L2_PIX_FMT_NV12_16L16) szimage = cx->cxhdl.height * 720 * 3 / 2; else szimage = cx->cxhdl.height * 720 * 2; /* * Let's request at least three buffers: two for the * DMA engine and one for userspace. */ if (vq->num_buffers + *nbuffers < 3) *nbuffers = 3 - vq->num_buffers; if (*nplanes) { if (*nplanes != 1 || sizes[0] < szimage) return -EINVAL; return 0; } sizes[0] = szimage; *nplanes = 1; return 0; } static void cx18_buf_queue(struct vb2_buffer *vb) { struct cx18_stream *s = vb2_get_drv_priv(vb->vb2_queue); struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); struct cx18_vb2_buffer *buf = container_of(vbuf, struct cx18_vb2_buffer, vb); unsigned long flags; spin_lock_irqsave(&s->vb_lock, flags); list_add_tail(&buf->list, &s->vb_capture); spin_unlock_irqrestore(&s->vb_lock, flags); } static int cx18_buf_prepare(struct vb2_buffer *vb) { struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); struct cx18_stream *s = vb2_get_drv_priv(vb->vb2_queue); struct cx18 *cx = s->cx; unsigned int size; /* * HM12 YUV size is (Y=(h*720) + UV=(h*(720/2))) * UYUV YUV size is (Y=(h*720) + UV=(h*(720))) */ if (s->pixelformat == V4L2_PIX_FMT_NV12_16L16) size = cx->cxhdl.height * 720 * 3 / 2; else size = cx->cxhdl.height * 720 * 2; if (vb2_plane_size(vb, 0) < size) return -EINVAL; vb2_set_plane_payload(vb, 0, size); vbuf->field = V4L2_FIELD_INTERLACED; return 0; } void cx18_clear_queue(struct cx18_stream *s, enum vb2_buffer_state state) { while (!list_empty(&s->vb_capture)) { struct cx18_vb2_buffer *buf; buf = list_first_entry(&s->vb_capture, struct cx18_vb2_buffer, list); list_del(&buf->list); vb2_buffer_done(&buf->vb.vb2_buf, state); } } static int cx18_start_streaming(struct vb2_queue *vq, unsigned int count) { struct v4l2_fh *owner = vq->owner; struct cx18_stream *s = vb2_get_drv_priv(vq); unsigned long flags; int rc; if (WARN_ON(!owner)) { rc = -EIO; goto clear_queue; } s->sequence = 0; rc = cx18_start_capture(fh2id(owner)); if (!rc) { /* Establish a buffer timeout */ mod_timer(&s->vb_timeout, msecs_to_jiffies(2000) + jiffies); return 0; } clear_queue: spin_lock_irqsave(&s->vb_lock, flags); cx18_clear_queue(s, VB2_BUF_STATE_QUEUED); spin_unlock_irqrestore(&s->vb_lock, flags); return rc; } static void cx18_stop_streaming(struct vb2_queue *vq) { struct cx18_stream *s = vb2_get_drv_priv(vq); unsigned long flags; cx18_stop_capture(s, 0); timer_delete_sync(&s->vb_timeout); spin_lock_irqsave(&s->vb_lock, flags); cx18_clear_queue(s, VB2_BUF_STATE_ERROR); spin_unlock_irqrestore(&s->vb_lock, flags); } static const struct vb2_ops cx18_vb2_qops = { .queue_setup = cx18_queue_setup, .buf_queue = cx18_buf_queue, .buf_prepare = cx18_buf_prepare, .start_streaming = cx18_start_streaming, .stop_streaming = cx18_stop_streaming, .wait_prepare = vb2_ops_wait_prepare, .wait_finish = vb2_ops_wait_finish, }; static int cx18_stream_init(struct cx18 *cx, int type) { struct cx18_stream *s = &cx->streams[type]; int err = 0; memset(s, 0, sizeof(*s)); /* initialize cx18_stream fields */ s->dvb = NULL; s->cx = cx; s->type = type; s->name = cx18_stream_info[type].name; s->handle = CX18_INVALID_TASK_HANDLE; s->dma = cx18_stream_info[type].dma; s->v4l2_dev_caps = cx18_stream_info[type].caps; s->buffers = cx->stream_buffers[type]; s->buf_size = cx->stream_buf_size[type]; INIT_LIST_HEAD(&s->buf_pool); s->bufs_per_mdl = 1; s->mdl_size = s->buf_size * s->bufs_per_mdl; init_waitqueue_head(&s->waitq); s->id = -1; spin_lock_init(&s->q_free.lock); cx18_queue_init(&s->q_free); spin_lock_init(&s->q_busy.lock); cx18_queue_init(&s->q_busy); spin_lock_init(&s->q_full.lock); cx18_queue_init(&s->q_full); spin_lock_init(&s->q_idle.lock); cx18_queue_init(&s->q_idle); INIT_WORK(&s->out_work_order, cx18_out_work_handler); INIT_LIST_HEAD(&s->vb_capture); timer_setup(&s->vb_timeout, cx18_vb_timeout, 0); spin_lock_init(&s->vb_lock); if (type == CX18_ENC_STREAM_TYPE_YUV) { s->vb_type = V4L2_BUF_TYPE_VIDEO_CAPTURE; /* Assume the previous pixel default */ s->pixelformat = V4L2_PIX_FMT_NV12_16L16; s->vb_bytes_per_frame = cx->cxhdl.height * 720 * 3 / 2; s->vb_bytes_per_line = 720; s->vidq.io_modes = VB2_READ | VB2_MMAP | VB2_DMABUF; s->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; s->vidq.drv_priv = s; s->vidq.buf_struct_size = sizeof(struct cx18_vb2_buffer); s->vidq.ops = &cx18_vb2_qops; s->vidq.mem_ops = &vb2_vmalloc_memops; s->vidq.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; s->vidq.min_buffers_needed = 2; s->vidq.gfp_flags = GFP_DMA32; s->vidq.dev = &cx->pci_dev->dev; s->vidq.lock = &cx->serialize_lock; err = vb2_queue_init(&s->vidq); if (err) v4l2_err(&cx->v4l2_dev, "cannot init vb2 queue\n"); s->video_dev.queue = &s->vidq; } return err; } static int cx18_prep_dev(struct cx18 *cx, int type) { struct cx18_stream *s = &cx->streams[type]; u32 cap = cx->v4l2_cap; int num_offset = cx18_stream_info[type].num_offset; int num = cx->instance + cx18_first_minor + num_offset; int err; /* * These five fields are always initialized. * For analog capture related streams, if video_dev.v4l2_dev == NULL then the * stream is not in use. * For the TS stream, if dvb == NULL then the stream is not in use. * In those cases no other fields but these four can be used. */ s->video_dev.v4l2_dev = NULL; s->dvb = NULL; s->cx = cx; s->type = type; s->name = cx18_stream_info[type].name; /* Check whether the radio is supported */ if (type == CX18_ENC_STREAM_TYPE_RAD && !(cap & V4L2_CAP_RADIO)) return 0; /* Check whether VBI is supported */ if (type == CX18_ENC_STREAM_TYPE_VBI && !(cap & (V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE))) return 0; /* User explicitly selected 0 buffers for these streams, so don't create them. */ if (cx18_stream_info[type].dma != DMA_NONE && cx->stream_buffers[type] == 0) { CX18_INFO("Disabled %s device\n", cx18_stream_info[type].name); return 0; } err = cx18_stream_init(cx, type); if (err) return err; /* Allocate the cx18_dvb struct only for the TS on cards with DTV */ if (type == CX18_ENC_STREAM_TYPE_TS) { if (cx->card->hw_all & CX18_HW_DVB) { s->dvb = kzalloc(sizeof(struct cx18_dvb), GFP_KERNEL); if (s->dvb == NULL) { CX18_ERR("Couldn't allocate cx18_dvb structure for %s\n", s->name); return -ENOMEM; } } else { /* Don't need buffers for the TS, if there is no DVB */ s->buffers = 0; } } if (num_offset == -1) return 0; /* initialize the v4l2 video device structure */ snprintf(s->video_dev.name, sizeof(s->video_dev.name), "%s %s", cx->v4l2_dev.name, s->name); s->video_dev.num = num; s->video_dev.v4l2_dev = &cx->v4l2_dev; if (type == CX18_ENC_STREAM_TYPE_YUV) s->video_dev.fops = &cx18_v4l2_enc_yuv_fops; else s->video_dev.fops = &cx18_v4l2_enc_fops; s->video_dev.release = video_device_release_empty; if (cx->card->video_inputs->video_type == CX18_CARD_INPUT_VID_TUNER) s->video_dev.tvnorms = cx->tuner_std; else s->video_dev.tvnorms = V4L2_STD_ALL; s->video_dev.lock = &cx->serialize_lock; cx18_set_funcs(&s->video_dev); return 0; } /* Initialize v4l2 variables and register v4l2 devices */ int cx18_streams_setup(struct cx18 *cx) { int type, ret; /* Setup V4L2 Devices */ for (type = 0; type < CX18_MAX_STREAMS; type++) { /* Prepare device */ ret = cx18_prep_dev(cx, type); if (ret < 0) break; /* Allocate Stream */ ret = cx18_stream_alloc(&cx->streams[type]); if (ret < 0) break; } if (type == CX18_MAX_STREAMS) return 0; /* One or more streams could not be initialized. Clean 'em all up. */ cx18_streams_cleanup(cx, 0); return ret; } static int cx18_reg_dev(struct cx18 *cx, int type) { struct cx18_stream *s = &cx->streams[type]; int vfl_type = cx18_stream_info[type].vfl_type; const char *name; int num, ret; if (type == CX18_ENC_STREAM_TYPE_TS && s->dvb != NULL) { ret = cx18_dvb_register(s); if (ret < 0) { CX18_ERR("DVB failed to register\n"); return ret; } } if (s->video_dev.v4l2_dev == NULL) return 0; num = s->video_dev.num; s->video_dev.device_caps = s->v4l2_dev_caps; /* device capabilities */ /* card number + user defined offset + device offset */ if (type != CX18_ENC_STREAM_TYPE_MPG) { struct cx18_stream *s_mpg = &cx->streams[CX18_ENC_STREAM_TYPE_MPG]; if (s_mpg->video_dev.v4l2_dev) num = s_mpg->video_dev.num + cx18_stream_info[type].num_offset; } video_set_drvdata(&s->video_dev, s); /* Register device. First try the desired minor, then any free one. */ ret = video_register_device_no_warn(&s->video_dev, vfl_type, num); if (ret < 0) { CX18_ERR("Couldn't register v4l2 device for %s (device node number %d)\n", s->name, num); s->video_dev.v4l2_dev = NULL; return ret; } name = video_device_node_name(&s->video_dev); switch (vfl_type) { case VFL_TYPE_VIDEO: CX18_INFO("Registered device %s for %s (%d x %d.%02d kB)\n", name, s->name, cx->stream_buffers[type], cx->stream_buf_size[type] / 1024, (cx->stream_buf_size[type] * 100 / 1024) % 100); break; case VFL_TYPE_RADIO: CX18_INFO("Registered device %s for %s\n", name, s->name); break; case VFL_TYPE_VBI: if (cx->stream_buffers[type]) CX18_INFO("Registered device %s for %s (%d x %d bytes)\n", name, s->name, cx->stream_buffers[type], cx->stream_buf_size[type]); else CX18_INFO("Registered device %s for %s\n", name, s->name); break; } return 0; } /* Register v4l2 devices */ int cx18_streams_register(struct cx18 *cx) { int type; int err; int ret = 0; /* Register V4L2 devices */ for (type = 0; type < CX18_MAX_STREAMS; type++) { err = cx18_reg_dev(cx, type); if (err && ret == 0) ret = err; } if (ret == 0) return 0; /* One or more streams could not be initialized. Clean 'em all up. */ cx18_streams_cleanup(cx, 1); return ret; } /* Unregister v4l2 devices */ void cx18_streams_cleanup(struct cx18 *cx, int unregister) { struct video_device *vdev; int type; /* Teardown all streams */ for (type = 0; type < CX18_MAX_STREAMS; type++) { /* The TS has a cx18_dvb structure, not a video_device */ if (type == CX18_ENC_STREAM_TYPE_TS) { if (cx->streams[type].dvb != NULL) { if (unregister) cx18_dvb_unregister(&cx->streams[type]); kfree(cx->streams[type].dvb); cx->streams[type].dvb = NULL; cx18_stream_free(&cx->streams[type]); } continue; } /* No struct video_device, but can have buffers allocated */ if (type == CX18_ENC_STREAM_TYPE_IDX) { /* If the module params didn't inhibit IDX ... */ if (cx->stream_buffers[type] != 0) { cx->stream_buffers[type] = 0; /* * Before calling cx18_stream_free(), * check if the IDX stream was actually set up. * Needed, since the cx18_probe() error path * exits through here as well as normal clean up */ if (cx->streams[type].buffers != 0) cx18_stream_free(&cx->streams[type]); } continue; } /* If struct video_device exists, can have buffers allocated */ vdev = &cx->streams[type].video_dev; if (vdev->v4l2_dev == NULL) continue; cx18_stream_free(&cx->streams[type]); if (type == CX18_ENC_STREAM_TYPE_YUV) vb2_video_unregister_device(vdev); else video_unregister_device(vdev); } } static void cx18_vbi_setup(struct cx18_stream *s) { struct cx18 *cx = s->cx; int raw = cx18_raw_vbi(cx); u32 data[CX2341X_MBOX_MAX_DATA]; int lines; if (cx->is_60hz) { cx->vbi.count = 12; cx->vbi.start[0] = 10; cx->vbi.start[1] = 273; } else { /* PAL/SECAM */ cx->vbi.count = 18; cx->vbi.start[0] = 6; cx->vbi.start[1] = 318; } /* setup VBI registers */ if (raw) v4l2_subdev_call(cx->sd_av, vbi, s_raw_fmt, &cx->vbi.in.fmt.vbi); else v4l2_subdev_call(cx->sd_av, vbi, s_sliced_fmt, &cx->vbi.in.fmt.sliced); /* * Send the CX18_CPU_SET_RAW_VBI_PARAM API command to setup Encoder Raw * VBI when the first analog capture channel starts, as once it starts * (e.g. MPEG), we can't effect any change in the Encoder Raw VBI setup * (i.e. for the VBI capture channels). We also send it for each * analog capture channel anyway just to make sure we get the proper * behavior */ if (raw) { lines = cx->vbi.count * 2; } else { /* * For 525/60 systems, according to the VIP 2 & BT.656 std: * The EAV RP code's Field bit toggles on line 4, a few lines * after the Vertcal Blank bit has already toggled. * Tell the encoder to capture 21-4+1=18 lines per field, * since we want lines 10 through 21. * * For 625/50 systems, according to the VIP 2 & BT.656 std: * The EAV RP code's Field bit toggles on line 1, a few lines * after the Vertcal Blank bit has already toggled. * (We've actually set the digitizer so that the Field bit * toggles on line 2.) Tell the encoder to capture 23-2+1=22 * lines per field, since we want lines 6 through 23. */ lines = cx->is_60hz ? (21 - 4 + 1) * 2 : (23 - 2 + 1) * 2; } data[0] = s->handle; /* Lines per field */ data[1] = (lines / 2) | ((lines / 2) << 16); /* bytes per line */ data[2] = (raw ? VBI_ACTIVE_SAMPLES : (cx->is_60hz ? VBI_HBLANK_SAMPLES_60HZ : VBI_HBLANK_SAMPLES_50HZ)); /* Every X number of frames a VBI interrupt arrives (frames as in 25 or 30 fps) */ data[3] = 1; /* * Set the SAV/EAV RP codes to look for as start/stop points * when in VIP-1.1 mode */ if (raw) { /* * Start codes for beginning of "active" line in vertical blank * 0x20 ( VerticalBlank ) * 0x60 ( EvenField VerticalBlank ) */ data[4] = 0x20602060; /* * End codes for end of "active" raw lines and regular lines * 0x30 ( VerticalBlank HorizontalBlank) * 0x70 ( EvenField VerticalBlank HorizontalBlank) * 0x90 (Task HorizontalBlank) * 0xd0 (Task EvenField HorizontalBlank) */ data[5] = 0x307090d0; } else { /* * End codes for active video, we want data in the hblank region * 0xb0 (Task 0 VerticalBlank HorizontalBlank) * 0xf0 (Task EvenField VerticalBlank HorizontalBlank) * * Since the V bit is only allowed to toggle in the EAV RP code, * just before the first active region line, these two * are problematic: * 0x90 (Task HorizontalBlank) * 0xd0 (Task EvenField HorizontalBlank) * * We have set the digitzer such that we don't have to worry * about these problem codes. */ data[4] = 0xB0F0B0F0; /* * Start codes for beginning of active line in vertical blank * 0xa0 (Task VerticalBlank ) * 0xe0 (Task EvenField VerticalBlank ) */ data[5] = 0xA0E0A0E0; } CX18_DEBUG_INFO("Setup VBI h: %d lines %x bpl %d fr %d %x %x\n", data[0], data[1], data[2], data[3], data[4], data[5]); cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data); } void cx18_stream_rotate_idx_mdls(struct cx18 *cx) { struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_IDX]; struct cx18_mdl *mdl; if (!cx18_stream_enabled(s)) return; /* Return if the firmware is not running low on MDLs */ if ((atomic_read(&s->q_free.depth) + atomic_read(&s->q_busy.depth)) >= CX18_ENC_STREAM_TYPE_IDX_FW_MDL_MIN) return; /* Return if there are no MDLs to rotate back to the firmware */ if (atomic_read(&s->q_full.depth) < 2) return; /* * Take the oldest IDX MDL still holding data, and discard its index * entries by scheduling the MDL to go back to the firmware */ mdl = cx18_dequeue(s, &s->q_full); if (mdl != NULL) cx18_enqueue(s, mdl, &s->q_free); } static struct cx18_queue *_cx18_stream_put_mdl_fw(struct cx18_stream *s, struct cx18_mdl *mdl) { struct cx18 *cx = s->cx; struct cx18_queue *q; /* Don't give it to the firmware, if we're not running a capture */ if (s->handle == CX18_INVALID_TASK_HANDLE || test_bit(CX18_F_S_STOPPING, &s->s_flags) || !test_bit(CX18_F_S_STREAMING, &s->s_flags)) return cx18_enqueue(s, mdl, &s->q_free); q = cx18_enqueue(s, mdl, &s->q_busy); if (q != &s->q_busy) return q; /* The firmware has the max MDLs it can handle */ cx18_mdl_sync_for_device(s, mdl); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, (void __iomem *) &cx->scb->cpu_mdl[mdl->id] - cx->enc_mem, s->bufs_per_mdl, mdl->id, s->mdl_size); return q; } static void _cx18_stream_load_fw_queue(struct cx18_stream *s) { struct cx18_queue *q; struct cx18_mdl *mdl; if (atomic_read(&s->q_free.depth) == 0 || atomic_read(&s->q_busy.depth) >= CX18_MAX_FW_MDLS_PER_STREAM) return; /* Move from q_free to q_busy notifying the firmware, until the limit */ do { mdl = cx18_dequeue(s, &s->q_free); if (mdl == NULL) break; q = _cx18_stream_put_mdl_fw(s, mdl); } while (atomic_read(&s->q_busy.depth) < CX18_MAX_FW_MDLS_PER_STREAM && q == &s->q_busy); } void cx18_out_work_handler(struct work_struct *work) { struct cx18_stream *s = container_of(work, struct cx18_stream, out_work_order); _cx18_stream_load_fw_queue(s); } static void cx18_stream_configure_mdls(struct cx18_stream *s) { cx18_unload_queues(s); switch (s->type) { case CX18_ENC_STREAM_TYPE_YUV: /* * Height should be a multiple of 32 lines. * Set the MDL size to the exact size needed for one frame. * Use enough buffers per MDL to cover the MDL size */ if (s->pixelformat == V4L2_PIX_FMT_NV12_16L16) s->mdl_size = 720 * s->cx->cxhdl.height * 3 / 2; else s->mdl_size = 720 * s->cx->cxhdl.height * 2; s->bufs_per_mdl = s->mdl_size / s->buf_size; if (s->mdl_size % s->buf_size) s->bufs_per_mdl++; break; case CX18_ENC_STREAM_TYPE_VBI: s->bufs_per_mdl = 1; if (cx18_raw_vbi(s->cx)) { s->mdl_size = (s->cx->is_60hz ? 12 : 18) * 2 * VBI_ACTIVE_SAMPLES; } else { /* * See comment in cx18_vbi_setup() below about the * extra lines we capture in sliced VBI mode due to * the lines on which EAV RP codes toggle. */ s->mdl_size = s->cx->is_60hz ? (21 - 4 + 1) * 2 * VBI_HBLANK_SAMPLES_60HZ : (23 - 2 + 1) * 2 * VBI_HBLANK_SAMPLES_50HZ; } break; default: s->bufs_per_mdl = 1; s->mdl_size = s->buf_size * s->bufs_per_mdl; break; } cx18_load_queues(s); } int cx18_start_v4l2_encode_stream(struct cx18_stream *s) { u32 data[MAX_MB_ARGUMENTS]; struct cx18 *cx = s->cx; int captype = 0; struct cx18_stream *s_idx; if (!cx18_stream_enabled(s)) return -EINVAL; CX18_DEBUG_INFO("Start encoder stream %s\n", s->name); switch (s->type) { case CX18_ENC_STREAM_TYPE_MPG: captype = CAPTURE_CHANNEL_TYPE_MPEG; cx->mpg_data_received = cx->vbi_data_inserted = 0; cx->dualwatch_jiffies = jiffies; cx->dualwatch_stereo_mode = v4l2_ctrl_g_ctrl(cx->cxhdl.audio_mode); cx->search_pack_header = 0; break; case CX18_ENC_STREAM_TYPE_IDX: captype = CAPTURE_CHANNEL_TYPE_INDEX; break; case CX18_ENC_STREAM_TYPE_TS: captype = CAPTURE_CHANNEL_TYPE_TS; break; case CX18_ENC_STREAM_TYPE_YUV: captype = CAPTURE_CHANNEL_TYPE_YUV; break; case CX18_ENC_STREAM_TYPE_PCM: captype = CAPTURE_CHANNEL_TYPE_PCM; break; case CX18_ENC_STREAM_TYPE_VBI: #ifdef CX18_ENCODER_PARSES_SLICED captype = cx18_raw_vbi(cx) ? CAPTURE_CHANNEL_TYPE_VBI : CAPTURE_CHANNEL_TYPE_SLICED_VBI; #else /* * Currently we set things up so that Sliced VBI from the * digitizer is handled as Raw VBI by the encoder */ captype = CAPTURE_CHANNEL_TYPE_VBI; #endif cx->vbi.frame = 0; cx->vbi.inserted_frame = 0; memset(cx->vbi.sliced_mpeg_size, 0, sizeof(cx->vbi.sliced_mpeg_size)); break; default: return -EINVAL; } /* Clear Streamoff flags in case left from last capture */ clear_bit(CX18_F_S_STREAMOFF, &s->s_flags); cx18_vapi_result(cx, data, CX18_CREATE_TASK, 1, CPU_CMD_MASK_CAPTURE); s->handle = data[0]; cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype); /* * For everything but CAPTURE_CHANNEL_TYPE_TS, play it safe and * set up all the parameters, as it is not obvious which parameters the * firmware shares across capture channel types and which it does not. * * Some of the cx18_vapi() calls below apply to only certain capture * channel types. We're hoping there's no harm in calling most of them * anyway, as long as the values are all consistent. Setting some * shared parameters will have no effect once an analog capture channel * has started streaming. */ if (captype != CAPTURE_CHANNEL_TYPE_TS) { cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 8, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 4, 1); /* * Audio related reset according to * Documentation/driver-api/media/drivers/cx2341x-devel.rst */ if (atomic_read(&cx->ana_capturing) == 0) cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, s->handle, 12); /* * Number of lines for Field 1 & Field 2 according to * Documentation/driver-api/media/drivers/cx2341x-devel.rst * Field 1 is 312 for 625 line systems in BT.656 * Field 2 is 313 for 625 line systems in BT.656 */ cx18_vapi(cx, CX18_CPU_SET_CAPTURE_LINE_NO, 3, s->handle, 312, 313); if (cx->v4l2_cap & V4L2_CAP_VBI_CAPTURE) cx18_vbi_setup(s); /* * Select to receive I, P, and B frame index entries, if the * index stream is enabled. Otherwise disable index entry * generation. */ s_idx = &cx->streams[CX18_ENC_STREAM_TYPE_IDX]; cx18_vapi_result(cx, data, CX18_CPU_SET_INDEXTABLE, 2, s->handle, cx18_stream_enabled(s_idx) ? 7 : 0); /* Call out to the common CX2341x API setup for user controls */ cx->cxhdl.priv = s; cx2341x_handler_setup(&cx->cxhdl); /* * When starting a capture and we're set for radio, * ensure the video is muted, despite the user control. */ if (!cx->cxhdl.video_mute && test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle, (v4l2_ctrl_g_ctrl(cx->cxhdl.video_mute_yuv) << 8) | 1); /* Enable the Video Format Converter for UYVY 4:2:2 support, * rather than the default HM12 Macroblovk 4:2:0 support. */ if (captype == CAPTURE_CHANNEL_TYPE_YUV) { if (s->pixelformat == V4L2_PIX_FMT_UYVY) cx18_vapi(cx, CX18_CPU_SET_VFC_PARAM, 2, s->handle, 1); else /* If in doubt, default to HM12 */ cx18_vapi(cx, CX18_CPU_SET_VFC_PARAM, 2, s->handle, 0); } } if (atomic_read(&cx->tot_capturing) == 0) { cx2341x_handler_set_busy(&cx->cxhdl, 1); clear_bit(CX18_F_I_EOS, &cx->i_flags); cx18_write_reg(cx, 7, CX18_DSP0_INTERRUPT_MASK); } cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle, (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem, (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem); /* Init all the cpu_mdls for this stream */ cx18_stream_configure_mdls(s); _cx18_stream_load_fw_queue(s); /* begin_capture */ if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) { CX18_DEBUG_WARN("Error starting capture!\n"); /* Ensure we're really not capturing before releasing MDLs */ set_bit(CX18_F_S_STOPPING, &s->s_flags); if (s->type == CX18_ENC_STREAM_TYPE_MPG) cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, 1); else cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle); clear_bit(CX18_F_S_STREAMING, &s->s_flags); /* FIXME - CX18_F_S_STREAMOFF as well? */ cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle); cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); s->handle = CX18_INVALID_TASK_HANDLE; clear_bit(CX18_F_S_STOPPING, &s->s_flags); if (atomic_read(&cx->tot_capturing) == 0) { set_bit(CX18_F_I_EOS, &cx->i_flags); cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK); } return -EINVAL; } /* you're live! sit back and await interrupts :) */ if (captype != CAPTURE_CHANNEL_TYPE_TS) atomic_inc(&cx->ana_capturing); atomic_inc(&cx->tot_capturing); return 0; } EXPORT_SYMBOL(cx18_start_v4l2_encode_stream); void cx18_stop_all_captures(struct cx18 *cx) { int i; for (i = CX18_MAX_STREAMS - 1; i >= 0; i--) { struct cx18_stream *s = &cx->streams[i]; if (!cx18_stream_enabled(s)) continue; if (test_bit(CX18_F_S_STREAMING, &s->s_flags)) cx18_stop_v4l2_encode_stream(s, 0); } } int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) { struct cx18 *cx = s->cx; if (!cx18_stream_enabled(s)) return -EINVAL; /* This function assumes that you are allowed to stop the capture and that we are actually capturing */ CX18_DEBUG_INFO("Stop Capture\n"); if (atomic_read(&cx->tot_capturing) == 0) return 0; set_bit(CX18_F_S_STOPPING, &s->s_flags); if (s->type == CX18_ENC_STREAM_TYPE_MPG) cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, !gop_end); else cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle); if (s->type == CX18_ENC_STREAM_TYPE_MPG && gop_end) { CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n"); } if (s->type != CX18_ENC_STREAM_TYPE_TS) atomic_dec(&cx->ana_capturing); atomic_dec(&cx->tot_capturing); /* Clear capture and no-read bits */ clear_bit(CX18_F_S_STREAMING, &s->s_flags); /* Tell the CX23418 it can't use our buffers anymore */ cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle); cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); s->handle = CX18_INVALID_TASK_HANDLE; clear_bit(CX18_F_S_STOPPING, &s->s_flags); if (atomic_read(&cx->tot_capturing) > 0) return 0; cx2341x_handler_set_busy(&cx->cxhdl, 0); cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK); wake_up(&s->waitq); return 0; } EXPORT_SYMBOL(cx18_stop_v4l2_encode_stream); u32 cx18_find_handle(struct cx18 *cx) { int i; /* find first available handle to be used for global settings */ for (i = 0; i < CX18_MAX_STREAMS; i++) { struct cx18_stream *s = &cx->streams[i]; if (s->video_dev.v4l2_dev && (s->handle != CX18_INVALID_TASK_HANDLE)) return s->handle; } return CX18_INVALID_TASK_HANDLE; } struct cx18_stream *cx18_handle_to_stream(struct cx18 *cx, u32 handle) { int i; struct cx18_stream *s; if (handle == CX18_INVALID_TASK_HANDLE) return NULL; for (i = 0; i < CX18_MAX_STREAMS; i++) { s = &cx->streams[i]; if (s->handle != handle) continue; if (cx18_stream_enabled(s)) return s; } return NULL; }