#include "drxk_map.h" #define DRXK_VERSION_MAJOR 0 #define DRXK_VERSION_MINOR 9 #define DRXK_VERSION_PATCH 4300 #define HI_I2C_DELAY 42 #define HI_I2C_BRIDGE_DELAY 350 #define DRXK_MAX_RETRIES 100 #define DRIVER_4400 1 #define DRXX_JTAGID 0x039210D9 #define DRXX_J_JTAGID 0x239310D9 #define DRXX_K_JTAGID 0x039210D9 #define DRX_UNKNOWN 254 #define DRX_AUTO 255 #define DRX_SCU_READY 0 #define DRXK_MAX_WAITTIME (200) #define SCU_RESULT_OK 0 #define SCU_RESULT_SIZE -4 #define SCU_RESULT_INVPAR -3 #define SCU_RESULT_UNKSTD -2 #define SCU_RESULT_UNKCMD -1 #ifndef DRXK_OFDM_TR_SHUTDOWN_TIMEOUT #define DRXK_OFDM_TR_SHUTDOWN_TIMEOUT (200) #endif #define DRXK_8VSB_MPEG_BIT_RATE 19392658UL /*bps*/ #define DRXK_DVBT_MPEG_BIT_RATE 32000000UL /*bps*/ #define DRXK_QAM16_MPEG_BIT_RATE 27000000UL /*bps*/ #define DRXK_QAM32_MPEG_BIT_RATE 33000000UL /*bps*/ #define DRXK_QAM64_MPEG_BIT_RATE 40000000UL /*bps*/ #define DRXK_QAM128_MPEG_BIT_RATE 46000000UL /*bps*/ #define DRXK_QAM256_MPEG_BIT_RATE 52000000UL /*bps*/ #define DRXK_MAX_MPEG_BIT_RATE 52000000UL /*bps*/ #define IQM_CF_OUT_ENA_OFDM__M 0x4 #define IQM_FS_ADJ_SEL_B_QAM 0x1 #define IQM_FS_ADJ_SEL_B_OFF 0x0 #define IQM_FS_ADJ_SEL_B_VSB 0x2 #define IQM_RC_ADJ_SEL_B_OFF 0x0 #define IQM_RC_ADJ_SEL_B_QAM 0x1 #define IQM_RC_ADJ_SEL_B_VSB 0x2 enum operation_mode { OM_NONE, OM_QAM_ITU_A, OM_QAM_ITU_B, OM_QAM_ITU_C, OM_DVBT }; enum drx_power_mode { DRX_POWER_UP = 0, DRX_POWER_MODE_1, DRX_POWER_MODE_2, DRX_POWER_MODE_3, DRX_POWER_MODE_4, DRX_POWER_MODE_5, DRX_POWER_MODE_6, DRX_POWER_MODE_7, DRX_POWER_MODE_8, DRX_POWER_MODE_9, DRX_POWER_MODE_10, DRX_POWER_MODE_11, DRX_POWER_MODE_12, DRX_POWER_MODE_13, DRX_POWER_MODE_14, DRX_POWER_MODE_15, DRX_POWER_MODE_16, DRX_POWER_DOWN = 255 }; /** /brief Intermediate power mode for DRXK, power down OFDM clock domain */ #ifndef DRXK_POWER_DOWN_OFDM #define DRXK_POWER_DOWN_OFDM DRX_POWER_MODE_1 #endif /** /brief Intermediate power mode for DRXK, power down core (sysclk) */ #ifndef DRXK_POWER_DOWN_CORE #define DRXK_POWER_DOWN_CORE DRX_POWER_MODE_9 #endif /** /brief Intermediate power mode for DRXK, power down pll (only osc runs) */ #ifndef DRXK_POWER_DOWN_PLL #define DRXK_POWER_DOWN_PLL DRX_POWER_MODE_10 #endif enum agc_ctrl_mode { DRXK_AGC_CTRL_AUTO = 0, DRXK_AGC_CTRL_USER, DRXK_AGC_CTRL_OFF }; enum e_drxk_state { DRXK_UNINITIALIZED = 0, DRXK_STOPPED, DRXK_DTV_STARTED, DRXK_ATV_STARTED, DRXK_POWERED_DOWN, DRXK_NO_DEV /* If drxk init failed */ }; enum e_drxk_coef_array_index { DRXK_COEF_IDX_MN = 0, DRXK_COEF_IDX_FM , DRXK_COEF_IDX_L , DRXK_COEF_IDX_LP , DRXK_COEF_IDX_BG , DRXK_COEF_IDX_DK , DRXK_COEF_IDX_I , DRXK_COEF_IDX_MAX }; enum e_drxk_sif_attenuation { DRXK_SIF_ATTENUATION_0DB, DRXK_SIF_ATTENUATION_3DB, DRXK_SIF_ATTENUATION_6DB, DRXK_SIF_ATTENUATION_9DB }; enum e_drxk_constellation { DRX_CONSTELLATION_BPSK = 0, DRX_CONSTELLATION_QPSK, DRX_CONSTELLATION_PSK8, DRX_CONSTELLATION_QAM16, DRX_CONSTELLATION_QAM32, DRX_CONSTELLATION_QAM64, DRX_CONSTELLATION_QAM128, DRX_CONSTELLATION_QAM256, DRX_CONSTELLATION_QAM512, DRX_CONSTELLATION_QAM1024, DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN, DRX_CONSTELLATION_AUTO = DRX_AUTO }; enum e_drxk_interleave_mode { DRXK_QAM_I12_J17 = 16, DRXK_QAM_I_UNKNOWN = DRX_UNKNOWN }; enum { DRXK_SPIN_A1 = 0, DRXK_SPIN_A2, DRXK_SPIN_A3, DRXK_SPIN_UNKNOWN }; enum drxk_cfg_dvbt_sqi_speed { DRXK_DVBT_SQI_SPEED_FAST = 0, DRXK_DVBT_SQI_SPEED_MEDIUM, DRXK_DVBT_SQI_SPEED_SLOW, DRXK_DVBT_SQI_SPEED_UNKNOWN = DRX_UNKNOWN } ; enum drx_fftmode_t { DRX_FFTMODE_2K = 0, DRX_FFTMODE_4K, DRX_FFTMODE_8K, DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN, DRX_FFTMODE_AUTO = DRX_AUTO }; enum drxmpeg_str_width_t { DRX_MPEG_STR_WIDTH_1, DRX_MPEG_STR_WIDTH_8 }; enum drx_qam_lock_range_t { DRX_QAM_LOCKRANGE_NORMAL, DRX_QAM_LOCKRANGE_EXTENDED }; struct drxk_cfg_dvbt_echo_thres_t { u16 threshold; enum drx_fftmode_t fft_mode; } ; struct s_cfg_agc { enum agc_ctrl_mode ctrl_mode; /* off, user, auto */ u16 output_level; /* range dependent on AGC */ u16 min_output_level; /* range dependent on AGC */ u16 max_output_level; /* range dependent on AGC */ u16 speed; /* range dependent on AGC */ u16 top; /* rf-agc take over point */ u16 cut_off_current; /* rf-agc is accelerated if output current is below cut-off current */ u16 ingain_tgt_max; u16 fast_clip_ctrl_delay; }; struct s_cfg_pre_saw { u16 reference; /* pre SAW reference value, range 0 .. 31 */ bool use_pre_saw; /* TRUE algorithms must use pre SAW sense */ }; struct drxk_ofdm_sc_cmd_t { u16 cmd; /**< Command number */ u16 subcmd; /**< Sub-command parameter*/ u16 param0; /**< General purpous param */ u16 param1; /**< General purpous param */ u16 param2; /**< General purpous param */ u16 param3; /**< General purpous param */ u16 param4; /**< General purpous param */ }; struct drxk_state { struct dvb_frontend frontend; struct dtv_frontend_properties props; struct device *dev; struct i2c_adapter *i2c; u8 demod_address; void *priv; struct mutex mutex; u32 m_instance; /**< Channel 1,2,3 or 4 */ int m_chunk_size; u8 chunk[256]; bool m_has_lna; bool m_has_dvbt; bool m_has_dvbc; bool m_has_audio; bool m_has_atv; bool m_has_oob; bool m_has_sawsw; /* TRUE if mat_tx is available */ bool m_has_gpio1; /* TRUE if mat_rx is available */ bool m_has_gpio2; /* TRUE if GPIO is available */ bool m_has_irqn; /* TRUE if IRQN is available */ u16 m_osc_clock_freq; u16 m_hi_cfg_timing_div; u16 m_hi_cfg_bridge_delay; u16 m_hi_cfg_wake_up_key; u16 m_hi_cfg_timeout; u16 m_hi_cfg_ctrl; s32 m_sys_clock_freq; /**< system clock frequency in kHz */ enum e_drxk_state m_drxk_state; /**< State of Drxk (init,stopped,started) */ enum operation_mode m_operation_mode; /**< digital standards */ struct s_cfg_agc m_vsb_rf_agc_cfg; /**< settings for VSB RF-AGC */ struct s_cfg_agc m_vsb_if_agc_cfg; /**< settings for VSB IF-AGC */ u16 m_vsb_pga_cfg; /**< settings for VSB PGA */ struct s_cfg_pre_saw m_vsb_pre_saw_cfg; /**< settings for pre SAW sense */ s32 m_Quality83percent; /**< MER level (*0.1 dB) for 83% quality indication */ s32 m_Quality93percent; /**< MER level (*0.1 dB) for 93% quality indication */ bool m_smart_ant_inverted; bool m_b_debug_enable_bridge; bool m_b_p_down_open_bridge; /**< only open DRXK bridge before power-down once it has been accessed */ bool m_b_power_down; /**< Power down when not used */ u32 m_iqm_fs_rate_ofs; /**< frequency shift as written to DRXK register (28bit fixpoint) */ bool m_enable_mpeg_output; /**< If TRUE, enable MPEG output */ bool m_insert_rs_byte; /**< If TRUE, insert RS byte */ bool m_enable_parallel; /**< If TRUE, parallel out otherwise serial */ bool m_invert_data; /**< If TRUE, invert DATA signals */ bool m_invert_err; /**< If TRUE, invert ERR signal */ bool m_invert_str; /**< If TRUE, invert STR signals */ bool m_invert_val; /**< If TRUE, invert VAL signals */ bool m_invert_clk; /**< If TRUE, invert CLK signals */ bool m_dvbc_static_clk; bool m_dvbt_static_clk; /**< If TRUE, static MPEG clockrate will be used, otherwise clockrate will adapt to the bitrate of the TS */ u32 m_dvbt_bitrate; u32 m_dvbc_bitrate; u8 m_ts_data_strength; u8 m_ts_clockk_strength; bool m_itut_annex_c; /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */ enum drxmpeg_str_width_t m_width_str; /**< MPEG start width */ u32 m_mpeg_ts_static_bitrate; /**< Maximum bitrate in b/s in case static clockrate is selected */ /* LARGE_INTEGER m_startTime; */ /**< Contains the time of the last demod start */ s32 m_mpeg_lock_time_out; /**< WaitForLockStatus Timeout (counts from start time) */ s32 m_demod_lock_time_out; /**< WaitForLockStatus Timeout (counts from start time) */ bool m_disable_te_ihandling; bool m_rf_agc_pol; bool m_if_agc_pol; struct s_cfg_agc m_atv_rf_agc_cfg; /**< settings for ATV RF-AGC */ struct s_cfg_agc m_atv_if_agc_cfg; /**< settings for ATV IF-AGC */ struct s_cfg_pre_saw m_atv_pre_saw_cfg; /**< settings for ATV pre SAW sense */ bool m_phase_correction_bypass; s16 m_atv_top_vid_peak; u16 m_atv_top_noise_th; enum e_drxk_sif_attenuation m_sif_attenuation; bool m_enable_cvbs_output; bool m_enable_sif_output; bool m_b_mirror_freq_spect; enum e_drxk_constellation m_constellation; /**< constellation type of the channel */ u32 m_curr_symbol_rate; /**< Current QAM symbol rate */ struct s_cfg_agc m_qam_rf_agc_cfg; /**< settings for QAM RF-AGC */ struct s_cfg_agc m_qam_if_agc_cfg; /**< settings for QAM IF-AGC */ u16 m_qam_pga_cfg; /**< settings for QAM PGA */ struct s_cfg_pre_saw m_qam_pre_saw_cfg; /**< settings for QAM pre SAW sense */ enum e_drxk_interleave_mode m_qam_interleave_mode; /**< QAM Interleave mode */ u16 m_fec_rs_plen; u16 m_fec_rs_prescale; enum drxk_cfg_dvbt_sqi_speed m_sqi_speed; u16 m_gpio; u16 m_gpio_cfg; struct s_cfg_agc m_dvbt_rf_agc_cfg; /**< settings for QAM RF-AGC */ struct s_cfg_agc m_dvbt_if_agc_cfg; /**< settings for QAM IF-AGC */ struct s_cfg_pre_saw m_dvbt_pre_saw_cfg; /**< settings for QAM pre SAW sense */ u16 m_agcfast_clip_ctrl_delay; bool m_adc_comp_passed; u16 m_adcCompCoef[64]; u16 m_adc_state; u8 *m_microcode; int m_microcode_length; bool m_drxk_a3_rom_code; bool m_drxk_a3_patch_code; bool m_rfmirror; u8 m_device_spin; u32 m_iqm_rc_rate; enum drx_power_mode m_current_power_mode; /* when true, avoids other devices to use the I2C bus */ bool drxk_i2c_exclusive_lock; /* * Configurable parameters at the driver. They stores the values found * at struct drxk_config. */ u16 uio_mask; /* Bits used by UIO */ bool enable_merr_cfg; bool single_master; bool no_i2c_bridge; bool antenna_dvbt; u16 antenna_gpio; fe_status_t fe_status; /* Firmware */ const char *microcode_name; struct completion fw_wait_load; const struct firmware *fw; int qam_demod_parameter_count; }; #define NEVER_LOCK 0 #define NOT_LOCKED 1 #define DEMOD_LOCK 2 #define FEC_LOCK 3 #define MPEG_LOCK 4