// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. */ #include #include #include #include #include #include #include #include #include #include "sc7180.h" #include "sc7280.h" #include "sc8180x.h" #include "sdm845.h" #include "sm8150.h" #include "sm8250.h" #define LUT_MAX_ENTRIES 40U #define LUT_SRC GENMASK(31, 30) #define LUT_L_VAL GENMASK(7, 0) #define CLK_HW_DIV 2 /* OSM Register offsets */ #define REG_ENABLE 0x0 #define OSM_LUT_ROW_SIZE 32 #define OSM_REG_FREQ_LUT 0x110 #define OSM_REG_PERF_STATE 0x920 /* EPSS Register offsets */ #define EPSS_LUT_ROW_SIZE 4 #define EPSS_REG_L3_VOTE 0x90 #define EPSS_REG_FREQ_LUT 0x100 #define EPSS_REG_PERF_STATE 0x320 #define OSM_L3_MAX_LINKS 1 #define to_osm_l3_provider(_provider) \ container_of(_provider, struct qcom_osm_l3_icc_provider, provider) struct qcom_osm_l3_icc_provider { void __iomem *base; unsigned int max_state; unsigned int reg_perf_state; unsigned long lut_tables[LUT_MAX_ENTRIES]; struct icc_provider provider; }; /** * struct qcom_osm_l3_node - Qualcomm specific interconnect nodes * @name: the node name used in debugfs * @links: an array of nodes where we can go next while traversing * @id: a unique node identifier * @num_links: the total number of @links * @buswidth: width of the interconnect between a node and the bus */ struct qcom_osm_l3_node { const char *name; u16 links[OSM_L3_MAX_LINKS]; u16 id; u16 num_links; u16 buswidth; }; struct qcom_osm_l3_desc { const struct qcom_osm_l3_node * const *nodes; size_t num_nodes; unsigned int lut_row_size; unsigned int reg_freq_lut; unsigned int reg_perf_state; }; enum { OSM_L3_MASTER_NODE = 10000, OSM_L3_SLAVE_NODE, }; #define DEFINE_QNODE(_name, _id, _buswidth, ...) \ static const struct qcom_osm_l3_node _name = { \ .name = #_name, \ .id = _id, \ .buswidth = _buswidth, \ .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ .links = { __VA_ARGS__ }, \ } DEFINE_QNODE(osm_l3_master, OSM_L3_MASTER_NODE, 16, OSM_L3_SLAVE_NODE); DEFINE_QNODE(osm_l3_slave, OSM_L3_SLAVE_NODE, 16); static const struct qcom_osm_l3_node * const osm_l3_nodes[] = { [MASTER_OSM_L3_APPS] = &osm_l3_master, [SLAVE_OSM_L3] = &osm_l3_slave, }; DEFINE_QNODE(epss_l3_master, OSM_L3_MASTER_NODE, 32, OSM_L3_SLAVE_NODE); DEFINE_QNODE(epss_l3_slave, OSM_L3_SLAVE_NODE, 32); static const struct qcom_osm_l3_node * const epss_l3_nodes[] = { [MASTER_EPSS_L3_APPS] = &epss_l3_master, [SLAVE_EPSS_L3_SHARED] = &epss_l3_slave, }; static const struct qcom_osm_l3_desc osm_l3 = { .nodes = osm_l3_nodes, .num_nodes = ARRAY_SIZE(osm_l3_nodes), .lut_row_size = OSM_LUT_ROW_SIZE, .reg_freq_lut = OSM_REG_FREQ_LUT, .reg_perf_state = OSM_REG_PERF_STATE, }; static const struct qcom_osm_l3_desc epss_l3_perf_state = { .nodes = epss_l3_nodes, .num_nodes = ARRAY_SIZE(epss_l3_nodes), .lut_row_size = EPSS_LUT_ROW_SIZE, .reg_freq_lut = EPSS_REG_FREQ_LUT, .reg_perf_state = EPSS_REG_PERF_STATE, }; static const struct qcom_osm_l3_desc epss_l3_l3_vote = { .nodes = epss_l3_nodes, .num_nodes = ARRAY_SIZE(epss_l3_nodes), .lut_row_size = EPSS_LUT_ROW_SIZE, .reg_freq_lut = EPSS_REG_FREQ_LUT, .reg_perf_state = EPSS_REG_L3_VOTE, }; static int qcom_osm_l3_set(struct icc_node *src, struct icc_node *dst) { struct qcom_osm_l3_icc_provider *qp; struct icc_provider *provider; const struct qcom_osm_l3_node *qn; unsigned int index; u64 rate; qn = src->data; provider = src->provider; qp = to_osm_l3_provider(provider); rate = icc_units_to_bps(dst->peak_bw); do_div(rate, qn->buswidth); for (index = 0; index < qp->max_state - 1; index++) { if (qp->lut_tables[index] >= rate) break; } writel_relaxed(index, qp->base + qp->reg_perf_state); return 0; } static int qcom_osm_l3_remove(struct platform_device *pdev) { struct qcom_osm_l3_icc_provider *qp = platform_get_drvdata(pdev); icc_nodes_remove(&qp->provider); icc_provider_del(&qp->provider); return 0; } static int qcom_osm_l3_probe(struct platform_device *pdev) { u32 info, src, lval, i, prev_freq = 0, freq; static unsigned long hw_rate, xo_rate; struct qcom_osm_l3_icc_provider *qp; const struct qcom_osm_l3_desc *desc; struct icc_onecell_data *data; struct icc_provider *provider; const struct qcom_osm_l3_node * const *qnodes; struct icc_node *node; size_t num_nodes; struct clk *clk; int ret; clk = clk_get(&pdev->dev, "xo"); if (IS_ERR(clk)) return PTR_ERR(clk); xo_rate = clk_get_rate(clk); clk_put(clk); clk = clk_get(&pdev->dev, "alternate"); if (IS_ERR(clk)) return PTR_ERR(clk); hw_rate = clk_get_rate(clk) / CLK_HW_DIV; clk_put(clk); qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL); if (!qp) return -ENOMEM; qp->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(qp->base)) return PTR_ERR(qp->base); /* HW should be in enabled state to proceed */ if (!(readl_relaxed(qp->base + REG_ENABLE) & 0x1)) { dev_err(&pdev->dev, "error hardware not enabled\n"); return -ENODEV; } desc = device_get_match_data(&pdev->dev); if (!desc) return -EINVAL; qp->reg_perf_state = desc->reg_perf_state; for (i = 0; i < LUT_MAX_ENTRIES; i++) { info = readl_relaxed(qp->base + desc->reg_freq_lut + i * desc->lut_row_size); src = FIELD_GET(LUT_SRC, info); lval = FIELD_GET(LUT_L_VAL, info); if (src) freq = xo_rate * lval; else freq = hw_rate; /* Two of the same frequencies signify end of table */ if (i > 0 && prev_freq == freq) break; dev_dbg(&pdev->dev, "index=%d freq=%d\n", i, freq); qp->lut_tables[i] = freq; prev_freq = freq; } qp->max_state = i; qnodes = desc->nodes; num_nodes = desc->num_nodes; data = devm_kcalloc(&pdev->dev, num_nodes, sizeof(*node), GFP_KERNEL); if (!data) return -ENOMEM; provider = &qp->provider; provider->dev = &pdev->dev; provider->set = qcom_osm_l3_set; provider->aggregate = icc_std_aggregate; provider->xlate = of_icc_xlate_onecell; INIT_LIST_HEAD(&provider->nodes); provider->data = data; ret = icc_provider_add(provider); if (ret) { dev_err(&pdev->dev, "error adding interconnect provider\n"); return ret; } for (i = 0; i < num_nodes; i++) { size_t j; node = icc_node_create(qnodes[i]->id); if (IS_ERR(node)) { ret = PTR_ERR(node); goto err; } node->name = qnodes[i]->name; /* Cast away const and add it back in qcom_osm_l3_set() */ node->data = (void *)qnodes[i]; icc_node_add(node, provider); for (j = 0; j < qnodes[i]->num_links; j++) icc_link_create(node, qnodes[i]->links[j]); data->nodes[i] = node; } data->num_nodes = num_nodes; platform_set_drvdata(pdev, qp); return 0; err: icc_nodes_remove(provider); icc_provider_del(provider); return ret; } static const struct of_device_id osm_l3_of_match[] = { { .compatible = "qcom,epss-l3", .data = &epss_l3_l3_vote }, { .compatible = "qcom,osm-l3", .data = &osm_l3 }, { .compatible = "qcom,sc7180-osm-l3", .data = &osm_l3 }, { .compatible = "qcom,sc7280-epss-l3", .data = &epss_l3_perf_state }, { .compatible = "qcom,sdm845-osm-l3", .data = &osm_l3 }, { .compatible = "qcom,sm8150-osm-l3", .data = &osm_l3 }, { .compatible = "qcom,sc8180x-osm-l3", .data = &osm_l3 }, { .compatible = "qcom,sm8250-epss-l3", .data = &epss_l3_perf_state }, { } }; MODULE_DEVICE_TABLE(of, osm_l3_of_match); static struct platform_driver osm_l3_driver = { .probe = qcom_osm_l3_probe, .remove = qcom_osm_l3_remove, .driver = { .name = "osm-l3", .of_match_table = osm_l3_of_match, .sync_state = icc_sync_state, }, }; module_platform_driver(osm_l3_driver); MODULE_DESCRIPTION("Qualcomm OSM L3 interconnect driver"); MODULE_LICENSE("GPL v2");