// SPDX-License-Identifier: GPL-2.0-only #include #include #include #include #include #include #include #include #include #include #include #include /* Register Map */ #define BT541_SWRESET_CMD 0x0000 #define BT541_WAKEUP_CMD 0x0001 #define BT541_IDLE_CMD 0x0004 #define BT541_SLEEP_CMD 0x0005 #define BT541_CLEAR_INT_STATUS_CMD 0x0003 #define BT541_CALIBRATE_CMD 0x0006 #define BT541_SAVE_STATUS_CMD 0x0007 #define BT541_SAVE_CALIBRATION_CMD 0x0008 #define BT541_RECALL_FACTORY_CMD 0x000f #define BT541_THRESHOLD 0x0020 #define BT541_LARGE_PALM_REJECT_AREA_TH 0x003F #define BT541_DEBUG_REG 0x0115 /* 0~7 */ #define BT541_TOUCH_MODE 0x0010 #define BT541_CHIP_REVISION 0x0011 #define BT541_FIRMWARE_VERSION 0x0012 #define ZINITIX_USB_DETECT 0x116 #define BT541_MINOR_FW_VERSION 0x0121 #define BT541_VENDOR_ID 0x001C #define BT541_HW_ID 0x0014 #define BT541_DATA_VERSION_REG 0x0013 #define BT541_SUPPORTED_FINGER_NUM 0x0015 #define BT541_EEPROM_INFO 0x0018 #define BT541_INITIAL_TOUCH_MODE 0x0019 #define BT541_TOTAL_NUMBER_OF_X 0x0060 #define BT541_TOTAL_NUMBER_OF_Y 0x0061 #define BT541_DELAY_RAW_FOR_HOST 0x007f #define BT541_BUTTON_SUPPORTED_NUM 0x00B0 #define BT541_BUTTON_SENSITIVITY 0x00B2 #define BT541_DUMMY_BUTTON_SENSITIVITY 0X00C8 #define BT541_X_RESOLUTION 0x00C0 #define BT541_Y_RESOLUTION 0x00C1 #define BT541_POINT_STATUS_REG 0x0080 #define BT541_ICON_STATUS_REG 0x00AA #define BT541_POINT_COORD_REG (BT541_POINT_STATUS_REG + 2) #define BT541_AFE_FREQUENCY 0x0100 #define BT541_DND_N_COUNT 0x0122 #define BT541_DND_U_COUNT 0x0135 #define BT541_RAWDATA_REG 0x0200 #define BT541_EEPROM_INFO_REG 0x0018 #define BT541_INT_ENABLE_FLAG 0x00f0 #define BT541_PERIODICAL_INTERRUPT_INTERVAL 0x00f1 #define BT541_BTN_WIDTH 0x016d #define BT541_CHECKSUM_RESULT 0x012c #define BT541_INIT_FLASH 0x01d0 #define BT541_WRITE_FLASH 0x01d1 #define BT541_READ_FLASH 0x01d2 #define ZINITIX_INTERNAL_FLAG_02 0x011e #define ZINITIX_INTERNAL_FLAG_03 0x011f #define ZINITIX_I2C_CHECKSUM_WCNT 0x016a #define ZINITIX_I2C_CHECKSUM_RESULT 0x016c /* Interrupt & status register flags */ #define BIT_PT_CNT_CHANGE BIT(0) #define BIT_DOWN BIT(1) #define BIT_MOVE BIT(2) #define BIT_UP BIT(3) #define BIT_PALM BIT(4) #define BIT_PALM_REJECT BIT(5) #define BIT_RESERVED_0 BIT(6) #define BIT_RESERVED_1 BIT(7) #define BIT_WEIGHT_CHANGE BIT(8) #define BIT_PT_NO_CHANGE BIT(9) #define BIT_REJECT BIT(10) #define BIT_PT_EXIST BIT(11) #define BIT_RESERVED_2 BIT(12) #define BIT_ERROR BIT(13) #define BIT_DEBUG BIT(14) #define BIT_ICON_EVENT BIT(15) #define SUB_BIT_EXIST BIT(0) #define SUB_BIT_DOWN BIT(1) #define SUB_BIT_MOVE BIT(2) #define SUB_BIT_UP BIT(3) #define SUB_BIT_UPDATE BIT(4) #define SUB_BIT_WAIT BIT(5) #define DEFAULT_TOUCH_POINT_MODE 2 #define MAX_SUPPORTED_FINGER_NUM 5 #define CHIP_ON_DELAY 15 // ms #define FIRMWARE_ON_DELAY 40 // ms struct point_coord { __le16 x; __le16 y; u8 width; u8 sub_status; // currently unused, but needed as padding: u8 minor_width; u8 angle; }; struct touch_event { __le16 status; u8 finger_cnt; u8 time_stamp; struct point_coord point_coord[MAX_SUPPORTED_FINGER_NUM]; }; struct bt541_ts_data { struct i2c_client *client; struct input_dev *input_dev; struct touchscreen_properties prop; struct regulator_bulk_data supplies[2]; u32 zinitix_mode; }; static int zinitix_read_data(struct i2c_client *client, u16 reg, void *values, size_t length) { __le16 reg_le = cpu_to_le16(reg); int ret; /* A single i2c_transfer() transaction does not work here. */ ret = i2c_master_send(client, (u8 *)®_le, sizeof(reg_le)); if (ret != sizeof(reg_le)) return ret < 0 ? ret : -EIO; ret = i2c_master_recv(client, (u8 *)values, length); if (ret != length) return ret < 0 ? ret : -EIO; ; return 0; } static int zinitix_write_u16(struct i2c_client *client, u16 reg, u16 value) { __le16 packet[2] = {cpu_to_le16(reg), cpu_to_le16(value)}; int ret; ret = i2c_master_send(client, (u8 *)packet, sizeof(packet)); if (ret != sizeof(packet)) return ret < 0 ? ret : -EIO; return 0; } static int zinitix_write_cmd(struct i2c_client *client, u16 reg) { __le16 reg_le = cpu_to_le16(reg); int ret; ret = i2c_master_send(client, (u8 *)®_le, sizeof(reg_le)); if (ret != sizeof(reg_le)) return ret < 0 ? ret : -EIO; return 0; } static bool zinitix_init_touch(struct bt541_ts_data *bt541) { struct i2c_client *client = bt541->client; int i; int error; error = zinitix_write_cmd(client, BT541_SWRESET_CMD); if (error) { dev_err(&client->dev, "Failed to write reset command\n"); return error; } error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, 0x0); if (error) { dev_err(&client->dev, "Failed to reset interrupt enable flag\n"); return error; } /* initialize */ error = zinitix_write_u16(client, BT541_X_RESOLUTION, bt541->prop.max_x); if (error) return error; error = zinitix_write_u16(client, BT541_Y_RESOLUTION, bt541->prop.max_y); if (error) return error; error = zinitix_write_u16(client, BT541_SUPPORTED_FINGER_NUM, MAX_SUPPORTED_FINGER_NUM); if (error) return error; error = zinitix_write_u16(client, BT541_INITIAL_TOUCH_MODE, bt541->zinitix_mode); if (error) return error; error = zinitix_write_u16(client, BT541_TOUCH_MODE, bt541->zinitix_mode); if (error) return error; error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE | BIT_UP); if (error) return error; /* clear queue */ for (i = 0; i < 10; i++) { zinitix_write_cmd(client, BT541_CLEAR_INT_STATUS_CMD); udelay(10); } return 0; } static int zinitix_init_regulators(struct bt541_ts_data *bt541) { struct i2c_client *client = bt541->client; int error; bt541->supplies[0].supply = "vdd"; bt541->supplies[1].supply = "vddo"; error = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(bt541->supplies), bt541->supplies); if (error < 0) { dev_err(&client->dev, "Failed to get regulators: %d\n", error); return error; } return 0; } static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541) { int error; struct i2c_client *client = bt541->client; error = zinitix_write_u16(client, 0xc000, 0x0001); if (error) { dev_err(&client->dev, "Failed to send power sequence(vendor cmd enable)\n"); return error; } udelay(10); error = zinitix_write_cmd(client, 0xc004); if (error) { dev_err(&client->dev, "Failed to send power sequence (intn clear)\n"); return error; } udelay(10); error = zinitix_write_u16(client, 0xc002, 0x0001); if (error) { dev_err(&client->dev, "Failed to send power sequence (nvm init)\n"); return error; } mdelay(2); error = zinitix_write_u16(client, 0xc001, 0x0001); if (error) { dev_err(&client->dev, "Failed to send power sequence (program start)\n"); return error; } msleep(FIRMWARE_ON_DELAY); return 0; } static void zinitix_report_finger(struct bt541_ts_data *bt541, int slot, const struct point_coord *p) { input_mt_slot(bt541->input_dev, slot); input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER, true); touchscreen_report_pos(bt541->input_dev, &bt541->prop, le16_to_cpu(p->x), le16_to_cpu(p->y), true); input_report_abs(bt541->input_dev, ABS_MT_TOUCH_MAJOR, p->width); } static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) { struct bt541_ts_data *bt541 = bt541_handler; struct i2c_client *client = bt541->client; struct touch_event touch_event; int error; int i; memset(&touch_event, 0, sizeof(struct touch_event)); error = zinitix_read_data(bt541->client, BT541_POINT_STATUS_REG, &touch_event, sizeof(struct touch_event)); if (error) { dev_err(&client->dev, "Failed to read in touchpoint struct\n"); goto out; } for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) if (touch_event.point_coord[i].sub_status & SUB_BIT_EXIST) zinitix_report_finger(bt541, i, &touch_event.point_coord[i]); input_mt_sync_frame(bt541->input_dev); input_sync(bt541->input_dev); out: zinitix_write_cmd(bt541->client, BT541_CLEAR_INT_STATUS_CMD); return IRQ_HANDLED; } static int zinitix_start(struct bt541_ts_data *bt541) { int error; error = regulator_bulk_enable(ARRAY_SIZE(bt541->supplies), bt541->supplies); if (error) { dev_err(&bt541->client->dev, "Failed to enable regulators: %d\n", error); return error; } msleep(CHIP_ON_DELAY); error = zinitix_send_power_on_sequence(bt541); if (error) { dev_err(&bt541->client->dev, "Error while sending power-on sequence: %d\n", error); return error; } error = zinitix_init_touch(bt541); if (error) { dev_err(&bt541->client->dev, "Error while configuring touch IC\n"); return error; } enable_irq(bt541->client->irq); return 0; } static int zinitix_stop(struct bt541_ts_data *bt541) { int error; disable_irq(bt541->client->irq); error = regulator_bulk_disable(ARRAY_SIZE(bt541->supplies), bt541->supplies); if (error) { dev_err(&bt541->client->dev, "Failed to disable regulators: %d\n", error); return error; } return 0; } static int zinitix_input_open(struct input_dev *dev) { struct bt541_ts_data *bt541 = input_get_drvdata(dev); return zinitix_start(bt541); } static void zinitix_input_close(struct input_dev *dev) { struct bt541_ts_data *bt541 = input_get_drvdata(dev); zinitix_stop(bt541); } static int zinitix_init_input_dev(struct bt541_ts_data *bt541) { struct input_dev *input_dev; int error; input_dev = devm_input_allocate_device(&bt541->client->dev); if (!input_dev) { dev_err(&bt541->client->dev, "Failed to allocate input device."); return -ENOMEM; } input_set_drvdata(input_dev, bt541); bt541->input_dev = input_dev; input_dev->name = "Zinitix Capacitive TouchScreen"; input_dev->phys = "input/ts"; input_dev->id.bustype = BUS_I2C; input_dev->open = zinitix_input_open; input_dev->close = zinitix_input_close; input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); touchscreen_parse_properties(input_dev, true, &bt541->prop); if (!bt541->prop.max_x || !bt541->prop.max_y) { dev_err(&bt541->client->dev, "Touchscreen-size-x and/or touchscreen-size-y not set in dts\n"); return -EINVAL; } error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); if (error) { dev_err(&bt541->client->dev, "Failed to initialize MT slots: %d", error); return error; } error = input_register_device(input_dev); if (error) { dev_err(&bt541->client->dev, "Failed to register input device: %d", error); return error; } return 0; } static int zinitix_ts_probe(struct i2c_client *client) { struct bt541_ts_data *bt541; int error; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { dev_err(&client->dev, "Failed to assert adapter's support for plain I2C.\n"); return -ENXIO; } bt541 = devm_kzalloc(&client->dev, sizeof(*bt541), GFP_KERNEL); if (!bt541) return -ENOMEM; bt541->client = client; i2c_set_clientdata(client, bt541); error = zinitix_init_regulators(bt541); if (error) { dev_err(&client->dev, "Failed to initialize regulators: %d\n", error); return error; } error = zinitix_init_input_dev(bt541); if (error) { dev_err(&client->dev, "Failed to initialize input device: %d\n", error); return error; } error = device_property_read_u32(&client->dev, "zinitix,mode", &bt541->zinitix_mode); if (error < 0) { /* fall back to mode 2 */ bt541->zinitix_mode = DEFAULT_TOUCH_POINT_MODE; } if (bt541->zinitix_mode != 2) { /* * If there are devices that don't support mode 2, support * for other modes (0, 1) will be needed. */ dev_err(&client->dev, "Malformed zinitix,mode property, must be 2 (supplied: %d)\n", bt541->zinitix_mode); return -EINVAL; } irq_set_status_flags(client->irq, IRQ_NOAUTOEN); error = devm_request_threaded_irq(&client->dev, client->irq, NULL, zinitix_ts_irq_handler, IRQF_ONESHOT, client->name, bt541); if (error) { dev_err(&client->dev, "Failed to request IRQ: %d\n", error); return error; } return 0; } static int __maybe_unused zinitix_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct bt541_ts_data *bt541 = i2c_get_clientdata(client); mutex_lock(&bt541->input_dev->mutex); if (bt541->input_dev->users) zinitix_stop(bt541); mutex_unlock(&bt541->input_dev->mutex); return 0; } static int __maybe_unused zinitix_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct bt541_ts_data *bt541 = i2c_get_clientdata(client); int ret = 0; mutex_lock(&bt541->input_dev->mutex); if (bt541->input_dev->users) ret = zinitix_start(bt541); mutex_unlock(&bt541->input_dev->mutex); return ret; } static SIMPLE_DEV_PM_OPS(zinitix_pm_ops, zinitix_suspend, zinitix_resume); #ifdef CONFIG_OF static const struct of_device_id zinitix_of_match[] = { { .compatible = "zinitix,bt541" }, { } }; MODULE_DEVICE_TABLE(of, zinitix_of_match); #endif static struct i2c_driver zinitix_ts_driver = { .probe_new = zinitix_ts_probe, .driver = { .name = "Zinitix-TS", .pm = &zinitix_pm_ops, .of_match_table = of_match_ptr(zinitix_of_match), }, }; module_i2c_driver(zinitix_ts_driver); MODULE_AUTHOR("Michael Srba "); MODULE_DESCRIPTION("Zinitix touchscreen driver"); MODULE_LICENSE("GPL v2");