// SPDX-License-Identifier: GPL-2.0-only /* * i8042 keyboard and mouse controller driver for Linux * * Copyright (c) 1999-2004 Vojtech Pavlik */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver"); MODULE_LICENSE("GPL"); static bool i8042_nokbd; module_param_named(nokbd, i8042_nokbd, bool, 0); MODULE_PARM_DESC(nokbd, "Do not probe or use KBD port."); static bool i8042_noaux; module_param_named(noaux, i8042_noaux, bool, 0); MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port."); static bool i8042_nomux; module_param_named(nomux, i8042_nomux, bool, 0); MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing controller is present."); static bool i8042_unlock; module_param_named(unlock, i8042_unlock, bool, 0); MODULE_PARM_DESC(unlock, "Ignore keyboard lock."); static bool i8042_probe_defer; module_param_named(probe_defer, i8042_probe_defer, bool, 0); MODULE_PARM_DESC(probe_defer, "Allow deferred probing."); enum i8042_controller_reset_mode { I8042_RESET_NEVER, I8042_RESET_ALWAYS, I8042_RESET_ON_S2RAM, #define I8042_RESET_DEFAULT I8042_RESET_ON_S2RAM }; static enum i8042_controller_reset_mode i8042_reset = I8042_RESET_DEFAULT; static int i8042_set_reset(const char *val, const struct kernel_param *kp) { enum i8042_controller_reset_mode *arg = kp->arg; int error; bool reset; if (val) { error = kstrtobool(val, &reset); if (error) return error; } else { reset = true; } *arg = reset ? I8042_RESET_ALWAYS : I8042_RESET_NEVER; return 0; } static const struct kernel_param_ops param_ops_reset_param = { .flags = KERNEL_PARAM_OPS_FL_NOARG, .set = i8042_set_reset, }; #define param_check_reset_param(name, p) \ __param_check(name, p, enum i8042_controller_reset_mode) module_param_named(reset, i8042_reset, reset_param, 0); MODULE_PARM_DESC(reset, "Reset controller on resume, cleanup or both"); static bool i8042_direct; module_param_named(direct, i8042_direct, bool, 0); MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode."); static bool i8042_dumbkbd; module_param_named(dumbkbd, i8042_dumbkbd, bool, 0); MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard"); static bool i8042_noloop; module_param_named(noloop, i8042_noloop, bool, 0); MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port"); static bool i8042_notimeout; module_param_named(notimeout, i8042_notimeout, bool, 0); MODULE_PARM_DESC(notimeout, "Ignore timeouts signalled by i8042"); static bool i8042_kbdreset; module_param_named(kbdreset, i8042_kbdreset, bool, 0); MODULE_PARM_DESC(kbdreset, "Reset device connected to KBD port"); #ifdef CONFIG_X86 static bool i8042_dritek; module_param_named(dritek, i8042_dritek, bool, 0); MODULE_PARM_DESC(dritek, "Force enable the Dritek keyboard extension"); #endif #ifdef CONFIG_PNP static bool i8042_nopnp; module_param_named(nopnp, i8042_nopnp, bool, 0); MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings"); #endif static bool i8042_forcenorestore; module_param_named(forcenorestore, i8042_forcenorestore, bool, 0); MODULE_PARM_DESC(forcenorestore, "Force no restore on s3 resume, copying s2idle behaviour"); #define DEBUG #ifdef DEBUG static bool i8042_debug; module_param_named(debug, i8042_debug, bool, 0600); MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off"); static bool i8042_unmask_kbd_data; module_param_named(unmask_kbd_data, i8042_unmask_kbd_data, bool, 0600); MODULE_PARM_DESC(unmask_kbd_data, "Unconditional enable (may reveal sensitive data) of normally sanitize-filtered kbd data traffic debug log [pre-condition: i8042.debug=1 enabled]"); #endif static bool i8042_present; static bool i8042_bypass_aux_irq_test; static char i8042_kbd_firmware_id[128]; static char i8042_aux_firmware_id[128]; static struct fwnode_handle *i8042_kbd_fwnode; #include "i8042.h" /* * i8042_lock protects serialization between i8042_command and * the interrupt handler. */ static DEFINE_SPINLOCK(i8042_lock); /* * Writers to AUX and KBD ports as well as users issuing i8042_command * directly should acquire i8042_mutex (by means of calling * i8042_lock_chip() and i8042_unlock_chip() helpers) to ensure that * they do not disturb each other (unfortunately in many i8042 * implementations write to one of the ports will immediately abort * command that is being processed by another port). */ static DEFINE_MUTEX(i8042_mutex); struct i8042_port { struct serio *serio; int irq; bool exists; bool driver_bound; signed char mux; }; #define I8042_KBD_PORT_NO 0 #define I8042_AUX_PORT_NO 1 #define I8042_MUX_PORT_NO 2 #define I8042_NUM_PORTS (I8042_NUM_MUX_PORTS + 2) static struct i8042_port i8042_ports[I8042_NUM_PORTS]; static unsigned char i8042_initial_ctr; static unsigned char i8042_ctr; static bool i8042_mux_present; static bool i8042_kbd_irq_registered; static bool i8042_aux_irq_registered; static unsigned char i8042_suppress_kbd_ack; static struct platform_device *i8042_platform_device; static struct notifier_block i8042_kbd_bind_notifier_block; static irqreturn_t i8042_interrupt(int irq, void *dev_id); static bool (*i8042_platform_filter)(unsigned char data, unsigned char str, struct serio *serio); void i8042_lock_chip(void) { mutex_lock(&i8042_mutex); } EXPORT_SYMBOL(i8042_lock_chip); void i8042_unlock_chip(void) { mutex_unlock(&i8042_mutex); } EXPORT_SYMBOL(i8042_unlock_chip); int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str, struct serio *serio)) { unsigned long flags; int ret = 0; spin_lock_irqsave(&i8042_lock, flags); if (i8042_platform_filter) { ret = -EBUSY; goto out; } i8042_platform_filter = filter; out: spin_unlock_irqrestore(&i8042_lock, flags); return ret; } EXPORT_SYMBOL(i8042_install_filter); int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str, struct serio *port)) { unsigned long flags; int ret = 0; spin_lock_irqsave(&i8042_lock, flags); if (i8042_platform_filter != filter) { ret = -EINVAL; goto out; } i8042_platform_filter = NULL; out: spin_unlock_irqrestore(&i8042_lock, flags); return ret; } EXPORT_SYMBOL(i8042_remove_filter); /* * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to * be ready for reading values from it / writing values to it. * Called always with i8042_lock held. */ static int i8042_wait_read(void) { int i = 0; while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) { udelay(50); i++; } return -(i == I8042_CTL_TIMEOUT); } static int i8042_wait_write(void) { int i = 0; while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) { udelay(50); i++; } return -(i == I8042_CTL_TIMEOUT); } /* * i8042_flush() flushes all data that may be in the keyboard and mouse buffers * of the i8042 down the toilet. */ static int i8042_flush(void) { unsigned long flags; unsigned char data, str; int count = 0; int retval = 0; spin_lock_irqsave(&i8042_lock, flags); while ((str = i8042_read_status()) & I8042_STR_OBF) { if (count++ < I8042_BUFFER_SIZE) { udelay(50); data = i8042_read_data(); dbg("%02x <- i8042 (flush, %s)\n", data, str & I8042_STR_AUXDATA ? "aux" : "kbd"); } else { retval = -EIO; break; } } spin_unlock_irqrestore(&i8042_lock, flags); return retval; } /* * i8042_command() executes a command on the i8042. It also sends the input * parameter(s) of the commands to it, and receives the output value(s). The * parameters are to be stored in the param array, and the output is placed * into the same array. The number of the parameters and output values is * encoded in bits 8-11 of the command number. */ static int __i8042_command(unsigned char *param, int command) { int i, error; if (i8042_noloop && command == I8042_CMD_AUX_LOOP) return -1; error = i8042_wait_write(); if (error) return error; dbg("%02x -> i8042 (command)\n", command & 0xff); i8042_write_command(command & 0xff); for (i = 0; i < ((command >> 12) & 0xf); i++) { error = i8042_wait_write(); if (error) { dbg(" -- i8042 (wait write timeout)\n"); return error; } dbg("%02x -> i8042 (parameter)\n", param[i]); i8042_write_data(param[i]); } for (i = 0; i < ((command >> 8) & 0xf); i++) { error = i8042_wait_read(); if (error) { dbg(" -- i8042 (wait read timeout)\n"); return error; } if (command == I8042_CMD_AUX_LOOP && !(i8042_read_status() & I8042_STR_AUXDATA)) { dbg(" -- i8042 (auxerr)\n"); return -1; } param[i] = i8042_read_data(); dbg("%02x <- i8042 (return)\n", param[i]); } return 0; } int i8042_command(unsigned char *param, int command) { unsigned long flags; int retval; if (!i8042_present) return -1; spin_lock_irqsave(&i8042_lock, flags); retval = __i8042_command(param, command); spin_unlock_irqrestore(&i8042_lock, flags); return retval; } EXPORT_SYMBOL(i8042_command); /* * i8042_kbd_write() sends a byte out through the keyboard interface. */ static int i8042_kbd_write(struct serio *port, unsigned char c) { unsigned long flags; int retval = 0; spin_lock_irqsave(&i8042_lock, flags); if (!(retval = i8042_wait_write())) { dbg("%02x -> i8042 (kbd-data)\n", c); i8042_write_data(c); } spin_unlock_irqrestore(&i8042_lock, flags); return retval; } /* * i8042_aux_write() sends a byte out through the aux interface. */ static int i8042_aux_write(struct serio *serio, unsigned char c) { struct i8042_port *port = serio->port_data; return i8042_command(&c, port->mux == -1 ? I8042_CMD_AUX_SEND : I8042_CMD_MUX_SEND + port->mux); } /* * i8042_port_close attempts to clear AUX or KBD port state by disabling * and then re-enabling it. */ static void i8042_port_close(struct serio *serio) { int irq_bit; int disable_bit; const char *port_name; if (serio == i8042_ports[I8042_AUX_PORT_NO].serio) { irq_bit = I8042_CTR_AUXINT; disable_bit = I8042_CTR_AUXDIS; port_name = "AUX"; } else { irq_bit = I8042_CTR_KBDINT; disable_bit = I8042_CTR_KBDDIS; port_name = "KBD"; } i8042_ctr &= ~irq_bit; if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) pr_warn("Can't write CTR while closing %s port\n", port_name); udelay(50); i8042_ctr &= ~disable_bit; i8042_ctr |= irq_bit; if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) pr_err("Can't reactivate %s port\n", port_name); /* * See if there is any data appeared while we were messing with * port state. */ i8042_interrupt(0, NULL); } /* * i8042_start() is called by serio core when port is about to finish * registering. It will mark port as existing so i8042_interrupt can * start sending data through it. */ static int i8042_start(struct serio *serio) { struct i8042_port *port = serio->port_data; device_set_wakeup_capable(&serio->dev, true); /* * On platforms using suspend-to-idle, allow the keyboard to * wake up the system from sleep by enabling keyboard wakeups * by default. This is consistent with keyboard wakeup * behavior on many platforms using suspend-to-RAM (ACPI S3) * by default. */ if (pm_suspend_default_s2idle() && serio == i8042_ports[I8042_KBD_PORT_NO].serio) { device_set_wakeup_enable(&serio->dev, true); } spin_lock_irq(&i8042_lock); port->exists = true; spin_unlock_irq(&i8042_lock); return 0; } /* * i8042_stop() marks serio port as non-existing so i8042_interrupt * will not try to send data to the port that is about to go away. * The function is called by serio core as part of unregister procedure. */ static void i8042_stop(struct serio *serio) { struct i8042_port *port = serio->port_data; spin_lock_irq(&i8042_lock); port->exists = false; port->serio = NULL; spin_unlock_irq(&i8042_lock); /* * We need to make sure that interrupt handler finishes using * our serio port before we return from this function. * We synchronize with both AUX and KBD IRQs because there is * a (very unlikely) chance that AUX IRQ is raised for KBD port * and vice versa. */ synchronize_irq(I8042_AUX_IRQ); synchronize_irq(I8042_KBD_IRQ); } /* * i8042_filter() filters out unwanted bytes from the input data stream. * It is called from i8042_interrupt and thus is running with interrupts * off and i8042_lock held. */ static bool i8042_filter(unsigned char data, unsigned char str, struct serio *serio) { if (unlikely(i8042_suppress_kbd_ack)) { if ((~str & I8042_STR_AUXDATA) && (data == 0xfa || data == 0xfe)) { i8042_suppress_kbd_ack--; dbg("Extra keyboard ACK - filtered out\n"); return true; } } if (i8042_platform_filter && i8042_platform_filter(data, str, serio)) { dbg("Filtered out by platform filter\n"); return true; } return false; } /* * i8042_interrupt() is the most important function in this driver - * it handles the interrupts from the i8042, and sends incoming bytes * to the upper layers. */ static irqreturn_t i8042_interrupt(int irq, void *dev_id) { struct i8042_port *port; struct serio *serio; unsigned long flags; unsigned char str, data; unsigned int dfl; unsigned int port_no; bool filtered; int ret = 1; spin_lock_irqsave(&i8042_lock, flags); str = i8042_read_status(); if (unlikely(~str & I8042_STR_OBF)) { spin_unlock_irqrestore(&i8042_lock, flags); if (irq) dbg("Interrupt %d, without any data\n", irq); ret = 0; goto out; } data = i8042_read_data(); if (i8042_mux_present && (str & I8042_STR_AUXDATA)) { static unsigned long last_transmit; static unsigned char last_str; dfl = 0; if (str & I8042_STR_MUXERR) { dbg("MUX error, status is %02x, data is %02x\n", str, data); /* * When MUXERR condition is signalled the data register can only contain * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately * it is not always the case. Some KBCs also report 0xfc when there is * nothing connected to the port while others sometimes get confused which * port the data came from and signal error leaving the data intact. They * _do not_ revert to legacy mode (actually I've never seen KBC reverting * to legacy mode yet, when we see one we'll add proper handling). * Anyway, we process 0xfc, 0xfd, 0xfe and 0xff as timeouts, and for the * rest assume that the data came from the same serio last byte * was transmitted (if transmission happened not too long ago). */ switch (data) { default: if (time_before(jiffies, last_transmit + HZ/10)) { str = last_str; break; } fallthrough; /* report timeout */ case 0xfc: case 0xfd: case 0xfe: dfl = SERIO_TIMEOUT; data = 0xfe; break; case 0xff: dfl = SERIO_PARITY; data = 0xfe; break; } } port_no = I8042_MUX_PORT_NO + ((str >> 6) & 3); last_str = str; last_transmit = jiffies; } else { dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) | ((str & I8042_STR_TIMEOUT && !i8042_notimeout) ? SERIO_TIMEOUT : 0); port_no = (str & I8042_STR_AUXDATA) ? I8042_AUX_PORT_NO : I8042_KBD_PORT_NO; } port = &i8042_ports[port_no]; serio = port->exists ? port->serio : NULL; filter_dbg(port->driver_bound, data, "<- i8042 (interrupt, %d, %d%s%s)\n", port_no, irq, dfl & SERIO_PARITY ? ", bad parity" : "", dfl & SERIO_TIMEOUT ? ", timeout" : ""); filtered = i8042_filter(data, str, serio); spin_unlock_irqrestore(&i8042_lock, flags); if (likely(serio && !filtered)) serio_interrupt(serio, data, dfl); out: return IRQ_RETVAL(ret); } /* * i8042_enable_kbd_port enables keyboard port on chip */ static int i8042_enable_kbd_port(void) { i8042_ctr &= ~I8042_CTR_KBDDIS; i8042_ctr |= I8042_CTR_KBDINT; if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { i8042_ctr &= ~I8042_CTR_KBDINT; i8042_ctr |= I8042_CTR_KBDDIS; pr_err("Failed to enable KBD port\n"); return -EIO; } return 0; } /* * i8042_enable_aux_port enables AUX (mouse) port on chip */ static int i8042_enable_aux_port(void) { i8042_ctr &= ~I8042_CTR_AUXDIS; i8042_ctr |= I8042_CTR_AUXINT; if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { i8042_ctr &= ~I8042_CTR_AUXINT; i8042_ctr |= I8042_CTR_AUXDIS; pr_err("Failed to enable AUX port\n"); return -EIO; } return 0; } /* * i8042_enable_mux_ports enables 4 individual AUX ports after * the controller has been switched into Multiplexed mode */ static int i8042_enable_mux_ports(void) { unsigned char param; int i; for (i = 0; i < I8042_NUM_MUX_PORTS; i++) { i8042_command(¶m, I8042_CMD_MUX_PFX + i); i8042_command(¶m, I8042_CMD_AUX_ENABLE); } return i8042_enable_aux_port(); } /* * i8042_set_mux_mode checks whether the controller has an * active multiplexor and puts the chip into Multiplexed (true) * or Legacy (false) mode. */ static int i8042_set_mux_mode(bool multiplex, unsigned char *mux_version) { unsigned char param, val; /* * Get rid of bytes in the queue. */ i8042_flush(); /* * Internal loopback test - send three bytes, they should come back from the * mouse interface, the last should be version. */ param = val = 0xf0; if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != val) return -1; param = val = multiplex ? 0x56 : 0xf6; if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != val) return -1; param = val = multiplex ? 0xa4 : 0xa5; if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param == val) return -1; /* * Workaround for interference with USB Legacy emulation * that causes a v10.12 MUX to be found. */ if (param == 0xac) return -1; if (mux_version) *mux_version = param; return 0; } /* * i8042_check_mux() checks whether the controller supports the PS/2 Active * Multiplexing specification by Synaptics, Phoenix, Insyde and * LCS/Telegraphics. */ static int i8042_check_mux(void) { unsigned char mux_version; if (i8042_set_mux_mode(true, &mux_version)) return -1; pr_info("Detected active multiplexing controller, rev %d.%d\n", (mux_version >> 4) & 0xf, mux_version & 0xf); /* * Disable all muxed ports by disabling AUX. */ i8042_ctr |= I8042_CTR_AUXDIS; i8042_ctr &= ~I8042_CTR_AUXINT; if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { pr_err("Failed to disable AUX port, can't use MUX\n"); return -EIO; } i8042_mux_present = true; return 0; } /* * The following is used to test AUX IRQ delivery. */ static struct completion i8042_aux_irq_delivered; static bool i8042_irq_being_tested; static irqreturn_t i8042_aux_test_irq(int irq, void *dev_id) { unsigned long flags; unsigned char str, data; int ret = 0; spin_lock_irqsave(&i8042_lock, flags); str = i8042_read_status(); if (str & I8042_STR_OBF) { data = i8042_read_data(); dbg("%02x <- i8042 (aux_test_irq, %s)\n", data, str & I8042_STR_AUXDATA ? "aux" : "kbd"); if (i8042_irq_being_tested && data == 0xa5 && (str & I8042_STR_AUXDATA)) complete(&i8042_aux_irq_delivered); ret = 1; } spin_unlock_irqrestore(&i8042_lock, flags); return IRQ_RETVAL(ret); } /* * i8042_toggle_aux - enables or disables AUX port on i8042 via command and * verifies success by readinng CTR. Used when testing for presence of AUX * port. */ static int i8042_toggle_aux(bool on) { unsigned char param; int i; if (i8042_command(¶m, on ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE)) return -1; /* some chips need some time to set the I8042_CTR_AUXDIS bit */ for (i = 0; i < 100; i++) { udelay(50); if (i8042_command(¶m, I8042_CMD_CTL_RCTR)) return -1; if (!(param & I8042_CTR_AUXDIS) == on) return 0; } return -1; } /* * i8042_check_aux() applies as much paranoia as it can at detecting * the presence of an AUX interface. */ static int i8042_check_aux(void) { int retval = -1; bool irq_registered = false; bool aux_loop_broken = false; unsigned long flags; unsigned char param; /* * Get rid of bytes in the queue. */ i8042_flush(); /* * Internal loopback test - filters out AT-type i8042's. Unfortunately * SiS screwed up and their 5597 doesn't support the LOOP command even * though it has an AUX port. */ param = 0x5a; retval = i8042_command(¶m, I8042_CMD_AUX_LOOP); if (retval || param != 0x5a) { /* * External connection test - filters out AT-soldered PS/2 i8042's * 0x00 - no error, 0x01-0x03 - clock/data stuck, 0xff - general error * 0xfa - no error on some notebooks which ignore the spec * Because it's common for chipsets to return error on perfectly functioning * AUX ports, we test for this only when the LOOP command failed. */ if (i8042_command(¶m, I8042_CMD_AUX_TEST) || (param && param != 0xfa && param != 0xff)) return -1; /* * If AUX_LOOP completed without error but returned unexpected data * mark it as broken */ if (!retval) aux_loop_broken = true; } /* * Bit assignment test - filters out PS/2 i8042's in AT mode */ if (i8042_toggle_aux(false)) { pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n"); pr_warn("If AUX port is really absent please use the 'i8042.noaux' option\n"); } if (i8042_toggle_aux(true)) return -1; /* * Reset keyboard (needed on some laptops to successfully detect * touchpad, e.g., some Gigabyte laptop models with Elantech * touchpads). */ if (i8042_kbdreset) { pr_warn("Attempting to reset device connected to KBD port\n"); i8042_kbd_write(NULL, (unsigned char) 0xff); } /* * Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and * used it for a PCI card or somethig else. */ if (i8042_noloop || i8042_bypass_aux_irq_test || aux_loop_broken) { /* * Without LOOP command we can't test AUX IRQ delivery. Assume the port * is working and hope we are right. */ retval = 0; goto out; } if (request_irq(I8042_AUX_IRQ, i8042_aux_test_irq, IRQF_SHARED, "i8042", i8042_platform_device)) goto out; irq_registered = true; if (i8042_enable_aux_port()) goto out; spin_lock_irqsave(&i8042_lock, flags); init_completion(&i8042_aux_irq_delivered); i8042_irq_being_tested = true; param = 0xa5; retval = __i8042_command(¶m, I8042_CMD_AUX_LOOP & 0xf0ff); spin_unlock_irqrestore(&i8042_lock, flags); if (retval) goto out; if (wait_for_completion_timeout(&i8042_aux_irq_delivered, msecs_to_jiffies(250)) == 0) { /* * AUX IRQ was never delivered so we need to flush the controller to * get rid of the byte we put there; otherwise keyboard may not work. */ dbg(" -- i8042 (aux irq test timeout)\n"); i8042_flush(); retval = -1; } out: /* * Disable the interface. */ i8042_ctr |= I8042_CTR_AUXDIS; i8042_ctr &= ~I8042_CTR_AUXINT; if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) retval = -1; if (irq_registered) free_irq(I8042_AUX_IRQ, i8042_platform_device); return retval; } static int i8042_controller_check(void) { if (i8042_flush()) { pr_info("No controller found\n"); return -ENODEV; } return 0; } static int i8042_controller_selftest(void) { unsigned char param; int i = 0; /* * We try this 5 times; on some really fragile systems this does not * take the first time... */ do { if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { pr_err("i8042 controller selftest timeout\n"); return -ENODEV; } if (param == I8042_RET_CTL_TEST) return 0; dbg("i8042 controller selftest: %#x != %#x\n", param, I8042_RET_CTL_TEST); msleep(50); } while (i++ < 5); #ifdef CONFIG_X86 /* * On x86, we don't fail entire i8042 initialization if controller * reset fails in hopes that keyboard port will still be functional * and user will still get a working keyboard. This is especially * important on netbooks. On other arches we trust hardware more. */ pr_info("giving up on controller selftest, continuing anyway...\n"); return 0; #else pr_err("i8042 controller selftest failed\n"); return -EIO; #endif } /* * i8042_controller_init initializes the i8042 controller, and, * most importantly, sets it into non-xlated mode if that's * desired. */ static int i8042_controller_init(void) { unsigned long flags; int n = 0; unsigned char ctr[2]; /* * Save the CTR for restore on unload / reboot. */ do { if (n >= 10) { pr_err("Unable to get stable CTR read\n"); return -EIO; } if (n != 0) udelay(50); if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) { pr_err("Can't read CTR while initializing i8042\n"); return i8042_probe_defer ? -EPROBE_DEFER : -EIO; } } while (n < 2 || ctr[0] != ctr[1]); i8042_initial_ctr = i8042_ctr = ctr[0]; /* * Disable the keyboard interface and interrupt. */ i8042_ctr |= I8042_CTR_KBDDIS; i8042_ctr &= ~I8042_CTR_KBDINT; /* * Handle keylock. */ spin_lock_irqsave(&i8042_lock, flags); if (~i8042_read_status() & I8042_STR_KEYLOCK) { if (i8042_unlock) i8042_ctr |= I8042_CTR_IGNKEYLOCK; else pr_warn("Warning: Keylock active\n"); } spin_unlock_irqrestore(&i8042_lock, flags); /* * If the chip is configured into nontranslated mode by the BIOS, don't * bother enabling translating and be happy. */ if (~i8042_ctr & I8042_CTR_XLATE) i8042_direct = true; /* * Set nontranslated mode for the kbd interface if requested by an option. * After this the kbd interface becomes a simple serial in/out, like the aux * interface is. We don't do this by default, since it can confuse notebook * BIOSes. */ if (i8042_direct) i8042_ctr &= ~I8042_CTR_XLATE; /* * Write CTR back. */ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { pr_err("Can't write CTR while initializing i8042\n"); return -EIO; } /* * Flush whatever accumulated while we were disabling keyboard port. */ i8042_flush(); return 0; } /* * Reset the controller and reset CRT to the original value set by BIOS. */ static void i8042_controller_reset(bool s2r_wants_reset) { i8042_flush(); /* * Disable both KBD and AUX interfaces so they don't get in the way */ i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS; i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT); if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) pr_warn("Can't write CTR while resetting\n"); /* * Disable MUX mode if present. */ if (i8042_mux_present) i8042_set_mux_mode(false, NULL); /* * Reset the controller if requested. */ if (i8042_reset == I8042_RESET_ALWAYS || (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) { i8042_controller_selftest(); } /* * Restore the original control register setting. */ if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR)) pr_warn("Can't restore CTR\n"); } /* * i8042_panic_blink() will turn the keyboard LEDs on or off and is called * when kernel panics. Flashing LEDs is useful for users running X who may * not see the console and will help distinguishing panics from "real" * lockups. * * Note that DELAY has a limit of 10ms so we will not get stuck here * waiting for KBC to free up even if KBD interrupt is off */ #define DELAY do { mdelay(1); if (++delay > 10) return delay; } while(0) static long i8042_panic_blink(int state) { long delay = 0; char led; led = (state) ? 0x01 | 0x04 : 0; while (i8042_read_status() & I8042_STR_IBF) DELAY; dbg("%02x -> i8042 (panic blink)\n", 0xed); i8042_suppress_kbd_ack = 2; i8042_write_data(0xed); /* set leds */ DELAY; while (i8042_read_status() & I8042_STR_IBF) DELAY; DELAY; dbg("%02x -> i8042 (panic blink)\n", led); i8042_write_data(led); DELAY; return delay; } #undef DELAY #ifdef CONFIG_X86 static void i8042_dritek_enable(void) { unsigned char param = 0x90; int error; error = i8042_command(¶m, 0x1059); if (error) pr_warn("Failed to enable DRITEK extension: %d\n", error); } #endif #ifdef CONFIG_PM /* * Here we try to reset everything back to a state we had * before suspending. */ static int i8042_controller_resume(bool s2r_wants_reset) { int error; error = i8042_controller_check(); if (error) return error; if (i8042_reset == I8042_RESET_ALWAYS || (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) { error = i8042_controller_selftest(); if (error) return error; } /* * Restore original CTR value and disable all ports */ i8042_ctr = i8042_initial_ctr; if (i8042_direct) i8042_ctr &= ~I8042_CTR_XLATE; i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS; i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT); if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { pr_warn("Can't write CTR to resume, retrying...\n"); msleep(50); if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { pr_err("CTR write retry failed\n"); return -EIO; } } #ifdef CONFIG_X86 if (i8042_dritek) i8042_dritek_enable(); #endif if (i8042_mux_present) { if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports()) pr_warn("failed to resume active multiplexor, mouse won't work\n"); } else if (i8042_ports[I8042_AUX_PORT_NO].serio) i8042_enable_aux_port(); if (i8042_ports[I8042_KBD_PORT_NO].serio) i8042_enable_kbd_port(); i8042_interrupt(0, NULL); return 0; } /* * Here we try to restore the original BIOS settings to avoid * upsetting it. */ static int i8042_pm_suspend(struct device *dev) { int i; if (!i8042_forcenorestore && pm_suspend_via_firmware()) i8042_controller_reset(true); /* Set up serio interrupts for system wakeup. */ for (i = 0; i < I8042_NUM_PORTS; i++) { struct serio *serio = i8042_ports[i].serio; if (serio && device_may_wakeup(&serio->dev)) enable_irq_wake(i8042_ports[i].irq); } return 0; } static int i8042_pm_resume_noirq(struct device *dev) { if (i8042_forcenorestore || !pm_resume_via_firmware()) i8042_interrupt(0, NULL); return 0; } static int i8042_pm_resume(struct device *dev) { bool want_reset; int i; for (i = 0; i < I8042_NUM_PORTS; i++) { struct serio *serio = i8042_ports[i].serio; if (serio && device_may_wakeup(&serio->dev)) disable_irq_wake(i8042_ports[i].irq); } /* * If platform firmware was not going to be involved in suspend, we did * not restore the controller state to whatever it had been at boot * time, so we do not need to do anything. */ if (i8042_forcenorestore || !pm_suspend_via_firmware()) return 0; /* * We only need to reset the controller if we are resuming after handing * off control to the platform firmware, otherwise we can simply restore * the mode. */ want_reset = pm_resume_via_firmware(); return i8042_controller_resume(want_reset); } static int i8042_pm_thaw(struct device *dev) { i8042_interrupt(0, NULL); return 0; } static int i8042_pm_reset(struct device *dev) { i8042_controller_reset(false); return 0; } static int i8042_pm_restore(struct device *dev) { return i8042_controller_resume(false); } static const struct dev_pm_ops i8042_pm_ops = { .suspend = i8042_pm_suspend, .resume_noirq = i8042_pm_resume_noirq, .resume = i8042_pm_resume, .thaw = i8042_pm_thaw, .poweroff = i8042_pm_reset, .restore = i8042_pm_restore, }; #endif /* CONFIG_PM */ /* * We need to reset the 8042 back to original mode on system shutdown, * because otherwise BIOSes will be confused. */ static void i8042_shutdown(struct platform_device *dev) { i8042_controller_reset(false); } static int i8042_create_kbd_port(void) { struct serio *serio; struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO]; serio = kzalloc(sizeof(struct serio), GFP_KERNEL); if (!serio) return -ENOMEM; serio->id.type = i8042_direct ? SERIO_8042 : SERIO_8042_XL; serio->write = i8042_dumbkbd ? NULL : i8042_kbd_write; serio->start = i8042_start; serio->stop = i8042_stop; serio->close = i8042_port_close; serio->ps2_cmd_mutex = &i8042_mutex; serio->port_data = port; serio->dev.parent = &i8042_platform_device->dev; strscpy(serio->name, "i8042 KBD port", sizeof(serio->name)); strscpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys)); strscpy(serio->firmware_id, i8042_kbd_firmware_id, sizeof(serio->firmware_id)); set_primary_fwnode(&serio->dev, i8042_kbd_fwnode); port->serio = serio; port->irq = I8042_KBD_IRQ; return 0; } static int i8042_create_aux_port(int idx) { struct serio *serio; int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx; struct i8042_port *port = &i8042_ports[port_no]; serio = kzalloc(sizeof(struct serio), GFP_KERNEL); if (!serio) return -ENOMEM; serio->id.type = SERIO_8042; serio->write = i8042_aux_write; serio->start = i8042_start; serio->stop = i8042_stop; serio->ps2_cmd_mutex = &i8042_mutex; serio->port_data = port; serio->dev.parent = &i8042_platform_device->dev; if (idx < 0) { strscpy(serio->name, "i8042 AUX port", sizeof(serio->name)); strscpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys)); strscpy(serio->firmware_id, i8042_aux_firmware_id, sizeof(serio->firmware_id)); serio->close = i8042_port_close; } else { snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx); snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1); strscpy(serio->firmware_id, i8042_aux_firmware_id, sizeof(serio->firmware_id)); } port->serio = serio; port->mux = idx; port->irq = I8042_AUX_IRQ; return 0; } static void i8042_free_kbd_port(void) { kfree(i8042_ports[I8042_KBD_PORT_NO].serio); i8042_ports[I8042_KBD_PORT_NO].serio = NULL; } static void i8042_free_aux_ports(void) { int i; for (i = I8042_AUX_PORT_NO; i < I8042_NUM_PORTS; i++) { kfree(i8042_ports[i].serio); i8042_ports[i].serio = NULL; } } static void i8042_register_ports(void) { int i; for (i = 0; i < I8042_NUM_PORTS; i++) { struct serio *serio = i8042_ports[i].serio; if (!serio) continue; printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n", serio->name, (unsigned long) I8042_DATA_REG, (unsigned long) I8042_COMMAND_REG, i8042_ports[i].irq); serio_register_port(serio); } } static void i8042_unregister_ports(void) { int i; for (i = 0; i < I8042_NUM_PORTS; i++) { if (i8042_ports[i].serio) { serio_unregister_port(i8042_ports[i].serio); i8042_ports[i].serio = NULL; } } } static void i8042_free_irqs(void) { if (i8042_aux_irq_registered) free_irq(I8042_AUX_IRQ, i8042_platform_device); if (i8042_kbd_irq_registered) free_irq(I8042_KBD_IRQ, i8042_platform_device); i8042_aux_irq_registered = i8042_kbd_irq_registered = false; } static int i8042_setup_aux(void) { int (*aux_enable)(void); int error; int i; if (i8042_check_aux()) return -ENODEV; if (i8042_nomux || i8042_check_mux()) { error = i8042_create_aux_port(-1); if (error) goto err_free_ports; aux_enable = i8042_enable_aux_port; } else { for (i = 0; i < I8042_NUM_MUX_PORTS; i++) { error = i8042_create_aux_port(i); if (error) goto err_free_ports; } aux_enable = i8042_enable_mux_ports; } error = request_irq(I8042_AUX_IRQ, i8042_interrupt, IRQF_SHARED, "i8042", i8042_platform_device); if (error) goto err_free_ports; error = aux_enable(); if (error) goto err_free_irq; i8042_aux_irq_registered = true; return 0; err_free_irq: free_irq(I8042_AUX_IRQ, i8042_platform_device); err_free_ports: i8042_free_aux_ports(); return error; } static int i8042_setup_kbd(void) { int error; error = i8042_create_kbd_port(); if (error) return error; error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED, "i8042", i8042_platform_device); if (error) goto err_free_port; error = i8042_enable_kbd_port(); if (error) goto err_free_irq; i8042_kbd_irq_registered = true; return 0; err_free_irq: free_irq(I8042_KBD_IRQ, i8042_platform_device); err_free_port: i8042_free_kbd_port(); return error; } static int i8042_kbd_bind_notifier(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; struct serio *serio = to_serio_port(dev); struct i8042_port *port = serio->port_data; if (serio != i8042_ports[I8042_KBD_PORT_NO].serio) return 0; switch (action) { case BUS_NOTIFY_BOUND_DRIVER: port->driver_bound = true; break; case BUS_NOTIFY_UNBIND_DRIVER: port->driver_bound = false; break; } return 0; } static int i8042_probe(struct platform_device *dev) { int error; if (i8042_reset == I8042_RESET_ALWAYS) { error = i8042_controller_selftest(); if (error) return error; } error = i8042_controller_init(); if (error) return error; #ifdef CONFIG_X86 if (i8042_dritek) i8042_dritek_enable(); #endif if (!i8042_noaux) { error = i8042_setup_aux(); if (error && error != -ENODEV && error != -EBUSY) goto out_fail; } if (!i8042_nokbd) { error = i8042_setup_kbd(); if (error) goto out_fail; } /* * Ok, everything is ready, let's register all serio ports */ i8042_register_ports(); return 0; out_fail: i8042_free_aux_ports(); /* in case KBD failed but AUX not */ i8042_free_irqs(); i8042_controller_reset(false); return error; } static int i8042_remove(struct platform_device *dev) { i8042_unregister_ports(); i8042_free_irqs(); i8042_controller_reset(false); return 0; } static struct platform_driver i8042_driver = { .driver = { .name = "i8042", #ifdef CONFIG_PM .pm = &i8042_pm_ops, #endif }, .probe = i8042_probe, .remove = i8042_remove, .shutdown = i8042_shutdown, }; static struct notifier_block i8042_kbd_bind_notifier_block = { .notifier_call = i8042_kbd_bind_notifier, }; static int __init i8042_init(void) { int err; dbg_init(); err = i8042_platform_init(); if (err) return (err == -ENODEV) ? 0 : err; err = i8042_controller_check(); if (err) goto err_platform_exit; /* Set this before creating the dev to allow i8042_command to work right away */ i8042_present = true; err = platform_driver_register(&i8042_driver); if (err) goto err_platform_exit; i8042_platform_device = platform_device_alloc("i8042", -1); if (!i8042_platform_device) { err = -ENOMEM; goto err_unregister_driver; } err = platform_device_add(i8042_platform_device); if (err) goto err_free_device; bus_register_notifier(&serio_bus, &i8042_kbd_bind_notifier_block); panic_blink = i8042_panic_blink; return 0; err_free_device: platform_device_put(i8042_platform_device); err_unregister_driver: platform_driver_unregister(&i8042_driver); err_platform_exit: i8042_platform_exit(); return err; } static void __exit i8042_exit(void) { if (!i8042_present) return; platform_device_unregister(i8042_platform_device); platform_driver_unregister(&i8042_driver); i8042_platform_exit(); bus_unregister_notifier(&serio_bus, &i8042_kbd_bind_notifier_block); panic_blink = NULL; } module_init(i8042_init); module_exit(i8042_exit);