// SPDX-License-Identifier: GPL-2.0-or-later /* * Xbox gamepad driver * * Copyright (c) 2002 Marko Friedemann * 2004 Oliver Schwartz , * Steven Toth , * Franz Lehner , * Ivan Hawkes * 2005 Dominic Cerquetti * 2006 Adam Buchbinder * 2007 Jan Kratochvil * 2010 Christoph Fritz * * This driver is based on: * - information from http://euc.jp/periphs/xbox-controller.ja.html * - the iForce driver drivers/char/joystick/iforce.c * - the skeleton-driver drivers/usb/usb-skeleton.c * - Xbox 360 information http://www.free60.org/wiki/Gamepad * - Xbox One information https://github.com/quantus/xbox-one-controller-protocol * * Thanks to: * - ITO Takayuki for providing essential xpad information on his website * - Vojtech Pavlik - iforce driver / input subsystem * - Greg Kroah-Hartman - usb-skeleton driver * - Xbox Linux project - extra USB IDs * - Pekka Pöyry (quantus) - Xbox One controller reverse-engineering * * TODO: * - fine tune axes (especially trigger axes) * - fix "analog" buttons (reported as digital now) * - get rumble working * - need USB IDs for other dance pads * * History: * * 2002-06-27 - 0.0.1 : first version, just said "XBOX HID controller" * * 2002-07-02 - 0.0.2 : basic working version * - all axes and 9 of the 10 buttons work (german InterAct device) * - the black button does not work * * 2002-07-14 - 0.0.3 : rework by Vojtech Pavlik * - indentation fixes * - usb + input init sequence fixes * * 2002-07-16 - 0.0.4 : minor changes, merge with Vojtech's v0.0.3 * - verified the lack of HID and report descriptors * - verified that ALL buttons WORK * - fixed d-pad to axes mapping * * 2002-07-17 - 0.0.5 : simplified d-pad handling * * 2004-10-02 - 0.0.6 : DDR pad support * - borrowed from the Xbox Linux kernel * - USB id's for commonly used dance pads are present * - dance pads will map D-PAD to buttons, not axes * - pass the module paramater 'dpad_to_buttons' to force * the D-PAD to map to buttons if your pad is not detected * * Later changes can be tracked in SCM. */ #include #include #include #include #include #include #include #include #include #define XPAD_PKT_LEN 64 /* * xbox d-pads should map to buttons, as is required for DDR pads * but we map them to axes when possible to simplify things */ #define MAP_DPAD_TO_BUTTONS (1 << 0) #define MAP_TRIGGERS_TO_BUTTONS (1 << 1) #define MAP_STICKS_TO_NULL (1 << 2) #define MAP_SELECT_BUTTON (1 << 3) #define MAP_PADDLES (1 << 4) #define MAP_PROFILE_BUTTON (1 << 5) #define DANCEPAD_MAP_CONFIG (MAP_DPAD_TO_BUTTONS | \ MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL) #define XTYPE_XBOX 0 #define XTYPE_XBOX360 1 #define XTYPE_XBOX360W 2 #define XTYPE_XBOXONE 3 #define XTYPE_UNKNOWN 4 /* Send power-off packet to xpad360w after holding the mode button for this many * seconds */ #define XPAD360W_POWEROFF_TIMEOUT 5 #define PKT_XB 0 #define PKT_XBE1 1 #define PKT_XBE2_FW_OLD 2 #define PKT_XBE2_FW_5_EARLY 3 #define PKT_XBE2_FW_5_11 4 static bool dpad_to_buttons; module_param(dpad_to_buttons, bool, S_IRUGO); MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads"); static bool triggers_to_buttons; module_param(triggers_to_buttons, bool, S_IRUGO); MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads"); static bool sticks_to_null; module_param(sticks_to_null, bool, S_IRUGO); MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads"); static bool auto_poweroff = true; module_param(auto_poweroff, bool, S_IWUSR | S_IRUGO); MODULE_PARM_DESC(auto_poweroff, "Power off wireless controllers on suspend"); static const struct xpad_device { u16 idVendor; u16 idProduct; char *name; u8 mapping; u8 xtype; } xpad_device[] = { { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 }, { 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 }, { 0x03eb, 0xff02, "Wooting Two (Legacy)", 0, XTYPE_XBOX360 }, { 0x03f0, 0x038D, "HyperX Clutch", 0, XTYPE_XBOX360 }, /* wired */ { 0x03f0, 0x048D, "HyperX Clutch", 0, XTYPE_XBOX360 }, /* wireless */ { 0x03f0, 0x0495, "HyperX Clutch Gladiate", 0, XTYPE_XBOXONE }, { 0x03f0, 0x07A0, "HyperX Clutch Gladiate RGB", 0, XTYPE_XBOXONE }, { 0x03f0, 0x08B6, "HyperX Clutch Gladiate", 0, XTYPE_XBOXONE }, /* v2 */ { 0x03f0, 0x09B4, "HyperX Clutch Tanto", 0, XTYPE_XBOXONE }, { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, { 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX }, { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 }, { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX }, { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX }, { 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX }, { 0x045e, 0x0288, "Microsoft Xbox Controller S v2", 0, XTYPE_XBOX }, { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX }, { 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 }, { 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 }, { 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE }, { 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE }, { 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", MAP_PADDLES, XTYPE_XBOXONE }, { 0x045e, 0x0b00, "Microsoft X-Box One Elite 2 pad", MAP_PADDLES, XTYPE_XBOXONE }, { 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE }, { 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, { 0x045e, 0x0b0a, "Microsoft X-Box Adaptive Controller", MAP_PROFILE_BUTTON, XTYPE_XBOXONE }, { 0x045e, 0x0b12, "Microsoft Xbox Series S|X Controller", MAP_SELECT_BUTTON, XTYPE_XBOXONE }, { 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 }, { 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 }, { 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 }, { 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 }, { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX }, { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX }, { 0x046d, 0xca8a, "Logitech Precision Vibration Feedback Wheel", 0, XTYPE_XBOX }, { 0x046d, 0xcaa3, "Logitech DriveFx Racing Wheel", 0, XTYPE_XBOX360 }, { 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 }, { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX }, { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX }, { 0x05fe, 0x3030, "Chic Controller", 0, XTYPE_XBOX }, { 0x05fe, 0x3031, "Chic Controller", 0, XTYPE_XBOX }, { 0x062a, 0x0020, "Logic3 Xbox GamePad", 0, XTYPE_XBOX }, { 0x062a, 0x0033, "Competition Pro Steering Wheel", 0, XTYPE_XBOX }, { 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX }, { 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX }, { 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 }, { 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX }, { 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX }, { 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX }, { 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX }, { 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX }, { 0x0738, 0x4530, "Mad Catz Universal MC2 Racing Wheel and Pedals", 0, XTYPE_XBOX }, { 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX }, { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX }, { 0x0738, 0x4586, "Mad Catz MicroCon Wireless Controller", 0, XTYPE_XBOX }, { 0x0738, 0x4588, "Mad Catz Blaster", 0, XTYPE_XBOX }, { 0x0738, 0x45ff, "Mad Catz Beat Pad (w/ Handle)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x0738, 0x4718, "Mad Catz Street Fighter IV FightStick SE", 0, XTYPE_XBOX360 }, { 0x0738, 0x4726, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x4736, "Mad Catz MicroCon Gamepad", 0, XTYPE_XBOX360 }, { 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 }, { 0x0738, 0x4743, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0x4758, "Mad Catz Arcade Game Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0x9871, "Mad Catz Portable Drum", 0, XTYPE_XBOX360 }, { 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 }, { 0x0738, 0xb738, "Mad Catz MVC2TE Stick 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 }, { 0x0738, 0xcb02, "Saitek Cyborg Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 }, { 0x0738, 0xcb03, "Saitek P3200 Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 }, { 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 }, { 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 }, { 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 }, { 0x0b05, 0x1a38, "ASUS ROG RAIKIRI", 0, XTYPE_XBOXONE }, { 0x0b05, 0x1abb, "ASUS ROG RAIKIRI PRO", 0, XTYPE_XBOXONE }, { 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX }, { 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX }, { 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX }, { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX }, { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX }, { 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX }, { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX }, { 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX }, { 0x0e4c, 0x1103, "Radica Gamester Reflex", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX }, { 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX }, { 0x0e4c, 0x3510, "Radica Gamester", 0, XTYPE_XBOX }, { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0008, "After Glow Pro Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x011f, "Rock Candy Gamepad Wired Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0131, "PDP EA Sports Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0133, "Xbox 360 Wired Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0139, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x013a, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0164, "PDP Battlefield One", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0165, "PDP Titanfall 2", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02a0, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02a1, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02a2, "PDP Wired Controller for Xbox One - Crimson Red", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02a4, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02a6, "PDP Wired Controller for Xbox One - Camo Series", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02a7, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02a8, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02ad, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02b3, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x02b8, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0413, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0501, "PDP Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0xf900, "PDP Afterglow AX.1", 0, XTYPE_XBOX360 }, { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX }, { 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX }, { 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 }, { 0x0f0d, 0x000c, "Hori PadEX Turbo", 0, XTYPE_XBOX360 }, { 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0f0d, 0x001b, "Hori Real Arcade Pro VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE }, { 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0f0d, 0x00c5, "Hori Fighting Commander ONE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0f0d, 0x00dc, "HORIPAD FPS for Nintendo Switch", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX }, { 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX }, { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX }, { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX }, { 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 }, { 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 }, { 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 }, { 0x11ff, 0x0511, "PXN V900", 0, XTYPE_XBOX360 }, { 0x1209, 0x2882, "Ardwiino Controller", 0, XTYPE_XBOX360 }, { 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 }, { 0x12ab, 0x0303, "Mortal Kombat Klassic FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 }, { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 }, { 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 }, { 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE }, { 0x1532, 0x0a29, "Razer Wolverine V2", 0, XTYPE_XBOXONE }, { 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 }, { 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 }, { 0x15e4, 0x3f10, "Batarang Xbox 360 controller", 0, XTYPE_XBOX360 }, { 0x162e, 0xbeef, "Joytech Neo-Se Take2", 0, XTYPE_XBOX360 }, { 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 }, { 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 }, { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 }, { 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf018, "Mad Catz Street Fighter IV SE Fighting Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf019, "Mad Catz Brawlstick for Xbox 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf021, "Mad Cats Ghost Recon FS GamePad", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf025, "Mad Catz Call Of Duty", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf027, "Mad Catz FPS Pro", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf02e, "Mad Catz Fightpad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf030, "Mad Catz Xbox 360 MC2 MicroCon Racing Wheel", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf036, "Mad Catz MicroCon GamePad Pro", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf039, "Mad Catz MvC2 TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf03a, "Mad Catz SFxT Fightstick Pro", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf03d, "Street Fighter IV Arcade Stick TE - Chun Li", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf03e, "Mad Catz MLG FightStick TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf03f, "Mad Catz FightStick SoulCaliber", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf042, "Mad Catz FightStick TES+", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf080, "Mad Catz FightStick TE2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf501, "HoriPad EX2 Turbo", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf502, "Hori Real Arcade Pro.VX SA", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf503, "Hori Fighting Stick VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf504, "Hori Real Arcade Pro. EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf505, "Hori Fighting Stick EX2B", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf506, "Hori Real Arcade Pro.EX Premium VLX", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf904, "PDP Versus Fighting Pad", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf906, "MortalKombat FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 }, { 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 }, { 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 }, { 0x20d6, 0x2001, "BDA Xbox Series X Wired Controller", 0, XTYPE_XBOXONE }, { 0x20d6, 0x2009, "PowerA Enhanced Wired Controller for Xbox Series X|S", 0, XTYPE_XBOXONE }, { 0x20d6, 0x281f, "PowerA Wired Controller For Xbox 360", 0, XTYPE_XBOX360 }, { 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE }, { 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x530a, "Xbox 360 Pro EX Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x531a, "PowerA Pro Ex", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5397, "FUS1ON Tournament Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x541a, "PowerA Xbox One Mini Wired Controller", 0, XTYPE_XBOXONE }, { 0x24c6, 0x542a, "Xbox ONE spectra", 0, XTYPE_XBOXONE }, { 0x24c6, 0x543a, "PowerA Xbox One wired controller", 0, XTYPE_XBOXONE }, { 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5510, "Hori Fighting Commander ONE (Xbox 360/PC Mode)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE }, { 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE }, { 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, { 0x2563, 0x058d, "OneXPlayer Gamepad", 0, XTYPE_XBOX360 }, { 0x294b, 0x3303, "Snakebyte GAMEPAD BASE X", 0, XTYPE_XBOXONE }, { 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE }, { 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE }, { 0x2dc8, 0x3106, "8BitDo Pro 2 Wired Controller", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1220, "Wooting Two HE", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 }, { 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 }, { 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 }, { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX }, { 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX }, { 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN } }; /* buttons shared with xbox and xbox360 */ static const signed short xpad_common_btn[] = { BTN_A, BTN_B, BTN_X, BTN_Y, /* "analog" buttons */ BTN_START, BTN_SELECT, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */ -1 /* terminating entry */ }; /* original xbox controllers only */ static const signed short xpad_btn[] = { BTN_C, BTN_Z, /* "analog" buttons */ -1 /* terminating entry */ }; /* used when dpad is mapped to buttons */ static const signed short xpad_btn_pad[] = { BTN_TRIGGER_HAPPY1, BTN_TRIGGER_HAPPY2, /* d-pad left, right */ BTN_TRIGGER_HAPPY3, BTN_TRIGGER_HAPPY4, /* d-pad up, down */ -1 /* terminating entry */ }; /* used when triggers are mapped to buttons */ static const signed short xpad_btn_triggers[] = { BTN_TL2, BTN_TR2, /* triggers left/right */ -1 }; static const signed short xpad360_btn[] = { /* buttons for x360 controller */ BTN_TL, BTN_TR, /* Button LB/RB */ BTN_MODE, /* The big X button */ -1 }; static const signed short xpad_abs[] = { ABS_X, ABS_Y, /* left stick */ ABS_RX, ABS_RY, /* right stick */ -1 /* terminating entry */ }; /* used when dpad is mapped to axes */ static const signed short xpad_abs_pad[] = { ABS_HAT0X, ABS_HAT0Y, /* d-pad axes */ -1 /* terminating entry */ }; /* used when triggers are mapped to axes */ static const signed short xpad_abs_triggers[] = { ABS_Z, ABS_RZ, /* triggers left/right */ -1 }; /* used when the controller has extra paddle buttons */ static const signed short xpad_btn_paddles[] = { BTN_TRIGGER_HAPPY5, BTN_TRIGGER_HAPPY6, /* paddle upper right, lower right */ BTN_TRIGGER_HAPPY7, BTN_TRIGGER_HAPPY8, /* paddle upper left, lower left */ -1 /* terminating entry */ }; /* * Xbox 360 has a vendor-specific class, so we cannot match it with only * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we * match against vendor id as well. Wired Xbox 360 devices have protocol 1, * wireless controllers have protocol 129. */ #define XPAD_XBOX360_VENDOR_PROTOCOL(vend, pr) \ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \ .idVendor = (vend), \ .bInterfaceClass = USB_CLASS_VENDOR_SPEC, \ .bInterfaceSubClass = 93, \ .bInterfaceProtocol = (pr) #define XPAD_XBOX360_VENDOR(vend) \ { XPAD_XBOX360_VENDOR_PROTOCOL((vend), 1) }, \ { XPAD_XBOX360_VENDOR_PROTOCOL((vend), 129) } /* The Xbox One controller uses subclass 71 and protocol 208. */ #define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \ .idVendor = (vend), \ .bInterfaceClass = USB_CLASS_VENDOR_SPEC, \ .bInterfaceSubClass = 71, \ .bInterfaceProtocol = (pr) #define XPAD_XBOXONE_VENDOR(vend) \ { XPAD_XBOXONE_VENDOR_PROTOCOL((vend), 208) } static const struct usb_device_id xpad_table[] = { { USB_INTERFACE_INFO('X', 'B', 0) }, /* Xbox USB-IF not-approved class */ XPAD_XBOX360_VENDOR(0x0079), /* GPD Win 2 controller */ XPAD_XBOX360_VENDOR(0x03eb), /* Wooting Keyboards (Legacy) */ XPAD_XBOX360_VENDOR(0x03f0), /* HP HyperX Xbox 360 controllers */ XPAD_XBOXONE_VENDOR(0x03f0), /* HP HyperX Xbox One controllers */ XPAD_XBOX360_VENDOR(0x044f), /* Thrustmaster Xbox 360 controllers */ XPAD_XBOX360_VENDOR(0x045e), /* Microsoft Xbox 360 controllers */ XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft Xbox One controllers */ XPAD_XBOX360_VENDOR(0x046d), /* Logitech Xbox 360-style controllers */ XPAD_XBOX360_VENDOR(0x056e), /* Elecom JC-U3613M */ XPAD_XBOX360_VENDOR(0x06a3), /* Saitek P3600 */ XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz Xbox 360 controllers */ { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */ XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */ XPAD_XBOX360_VENDOR(0x07ff), /* Mad Catz Gamepad */ XPAD_XBOXONE_VENDOR(0x0b05), /* ASUS controllers */ XPAD_XBOX360_VENDOR(0x0c12), /* Zeroplus X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f Xbox 360 controllers */ XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f Xbox One controllers */ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori controllers */ XPAD_XBOXONE_VENDOR(0x0f0d), /* Hori controllers */ XPAD_XBOX360_VENDOR(0x1038), /* SteelSeries controllers */ XPAD_XBOXONE_VENDOR(0x10f5), /* Turtle Beach Controllers */ XPAD_XBOX360_VENDOR(0x11c9), /* Nacon GC100XF */ XPAD_XBOX360_VENDOR(0x11ff), /* PXN V900 */ XPAD_XBOX360_VENDOR(0x1209), /* Ardwiino Controllers */ XPAD_XBOX360_VENDOR(0x12ab), /* Xbox 360 dance pads */ XPAD_XBOX360_VENDOR(0x1430), /* RedOctane Xbox 360 controllers */ XPAD_XBOX360_VENDOR(0x146b), /* Bigben Interactive controllers */ XPAD_XBOX360_VENDOR(0x1532), /* Razer Sabertooth */ XPAD_XBOXONE_VENDOR(0x1532), /* Razer Wildcat */ XPAD_XBOX360_VENDOR(0x15e4), /* Numark Xbox 360 controllers */ XPAD_XBOX360_VENDOR(0x162e), /* Joytech Xbox 360 controllers */ XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */ XPAD_XBOX360_VENDOR(0x17ef), /* Lenovo */ XPAD_XBOX360_VENDOR(0x1949), /* Amazon controllers */ XPAD_XBOX360_VENDOR(0x1bad), /* Harmonix Rock Band guitar and drums */ XPAD_XBOX360_VENDOR(0x20d6), /* PowerA controllers */ XPAD_XBOXONE_VENDOR(0x20d6), /* PowerA controllers */ XPAD_XBOX360_VENDOR(0x24c6), /* PowerA controllers */ XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA controllers */ XPAD_XBOX360_VENDOR(0x2563), /* OneXPlayer Gamepad */ XPAD_XBOX360_VENDOR(0x260d), /* Dareu H101 */ XPAD_XBOXONE_VENDOR(0x294b), /* Snakebyte */ XPAD_XBOX360_VENDOR(0x2c22), /* Qanba Controllers */ XPAD_XBOX360_VENDOR(0x2dc8), /* 8BitDo Pro 2 Wired Controller */ XPAD_XBOXONE_VENDOR(0x2dc8), /* 8BitDo Pro 2 Wired Controller for Xbox */ XPAD_XBOXONE_VENDOR(0x2e24), /* Hyperkin Duke Xbox One pad */ XPAD_XBOX360_VENDOR(0x2f24), /* GameSir controllers */ XPAD_XBOX360_VENDOR(0x31e3), /* Wooting Keyboards */ XPAD_XBOX360_VENDOR(0x3285), /* Nacon GC-100 */ XPAD_XBOX360_VENDOR(0x3537), /* GameSir Controllers */ XPAD_XBOXONE_VENDOR(0x3537), /* GameSir Controllers */ { } }; MODULE_DEVICE_TABLE(usb, xpad_table); struct xboxone_init_packet { u16 idVendor; u16 idProduct; const u8 *data; u8 len; }; #define XBOXONE_INIT_PKT(_vid, _pid, _data) \ { \ .idVendor = (_vid), \ .idProduct = (_pid), \ .data = (_data), \ .len = ARRAY_SIZE(_data), \ } /* * starting with xbox one, the game input protocol is used * magic numbers are taken from * - https://github.com/xpadneo/gip-dissector/blob/main/src/gip-dissector.lua * - https://github.com/medusalix/xone/blob/master/bus/protocol.c */ #define GIP_CMD_ACK 0x01 #define GIP_CMD_IDENTIFY 0x04 #define GIP_CMD_POWER 0x05 #define GIP_CMD_AUTHENTICATE 0x06 #define GIP_CMD_VIRTUAL_KEY 0x07 #define GIP_CMD_RUMBLE 0x09 #define GIP_CMD_LED 0x0a #define GIP_CMD_FIRMWARE 0x0c #define GIP_CMD_INPUT 0x20 #define GIP_SEQ0 0x00 #define GIP_OPT_ACK 0x10 #define GIP_OPT_INTERNAL 0x20 /* * length of the command payload encoded with * https://en.wikipedia.org/wiki/LEB128 * which is a no-op for N < 128 */ #define GIP_PL_LEN(N) (N) /* * payload specific defines */ #define GIP_PWR_ON 0x00 #define GIP_LED_ON 0x01 #define GIP_MOTOR_R BIT(0) #define GIP_MOTOR_L BIT(1) #define GIP_MOTOR_RT BIT(2) #define GIP_MOTOR_LT BIT(3) #define GIP_MOTOR_ALL (GIP_MOTOR_R | GIP_MOTOR_L | GIP_MOTOR_RT | GIP_MOTOR_LT) #define GIP_WIRED_INTF_DATA 0 #define GIP_WIRED_INTF_AUDIO 1 /* * This packet is required for all Xbox One pads with 2015 * or later firmware installed (or present from the factory). */ static const u8 xboxone_power_on[] = { GIP_CMD_POWER, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(1), GIP_PWR_ON }; /* * This packet is required for Xbox One S (0x045e:0x02ea) * and Xbox One Elite Series 2 (0x045e:0x0b00) pads to * initialize the controller that was previously used in * Bluetooth mode. */ static const u8 xboxone_s_init[] = { GIP_CMD_POWER, GIP_OPT_INTERNAL, GIP_SEQ0, 0x0f, 0x06 }; /* * This packet is required to get additional input data * from Xbox One Elite Series 2 (0x045e:0x0b00) pads. * We mostly do this right now to get paddle data */ static const u8 extra_input_packet_init[] = { 0x4d, 0x10, 0x01, 0x02, 0x07, 0x00 }; /* * This packet is required for the Titanfall 2 Xbox One pads * (0x0e6f:0x0165) to finish initialization and for Hori pads * (0x0f0d:0x0067) to make the analog sticks work. */ static const u8 xboxone_hori_ack_id[] = { GIP_CMD_ACK, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(9), 0x00, GIP_CMD_IDENTIFY, GIP_OPT_INTERNAL, 0x3a, 0x00, 0x00, 0x00, 0x80, 0x00 }; /* * This packet is required for most (all?) of the PDP pads to start * sending input reports. These pads include: (0x0e6f:0x02ab), * (0x0e6f:0x02a4), (0x0e6f:0x02a6). */ static const u8 xboxone_pdp_led_on[] = { GIP_CMD_LED, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(3), 0x00, GIP_LED_ON, 0x14 }; /* * This packet is required for most (all?) of the PDP pads to start * sending input reports. These pads include: (0x0e6f:0x02ab), * (0x0e6f:0x02a4), (0x0e6f:0x02a6). */ static const u8 xboxone_pdp_auth[] = { GIP_CMD_AUTHENTICATE, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(2), 0x01, 0x00 }; /* * A specific rumble packet is required for some PowerA pads to start * sending input reports. One of those pads is (0x24c6:0x543a). */ static const u8 xboxone_rumblebegin_init[] = { GIP_CMD_RUMBLE, 0x00, GIP_SEQ0, GIP_PL_LEN(9), 0x00, GIP_MOTOR_ALL, 0x00, 0x00, 0x1D, 0x1D, 0xFF, 0x00, 0x00 }; /* * A rumble packet with zero FF intensity will immediately * terminate the rumbling required to init PowerA pads. * This should happen fast enough that the motors don't * spin up to enough speed to actually vibrate the gamepad. */ static const u8 xboxone_rumbleend_init[] = { GIP_CMD_RUMBLE, 0x00, GIP_SEQ0, GIP_PL_LEN(9), 0x00, GIP_MOTOR_ALL, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; /* * This specifies the selection of init packets that a gamepad * will be sent on init *and* the order in which they will be * sent. The correct sequence number will be added when the * packet is going to be sent. */ static const struct xboxone_init_packet xboxone_init_packets[] = { XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_ack_id), XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_ack_id), XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_power_on), XBOXONE_INIT_PKT(0x045e, 0x02ea, xboxone_s_init), XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init), XBOXONE_INIT_PKT(0x045e, 0x0b00, extra_input_packet_init), XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_led_on), XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_auth), XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init), XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init), XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init), XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumbleend_init), XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumbleend_init), XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumbleend_init), }; struct xpad_output_packet { u8 data[XPAD_PKT_LEN]; u8 len; bool pending; }; #define XPAD_OUT_CMD_IDX 0 #define XPAD_OUT_FF_IDX 1 #define XPAD_OUT_LED_IDX (1 + IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF)) #define XPAD_NUM_OUT_PACKETS (1 + \ IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF) + \ IS_ENABLED(CONFIG_JOYSTICK_XPAD_LEDS)) struct usb_xpad { struct input_dev *dev; /* input device interface */ struct input_dev __rcu *x360w_dev; struct usb_device *udev; /* usb device */ struct usb_interface *intf; /* usb interface */ bool pad_present; bool input_created; struct urb *irq_in; /* urb for interrupt in report */ unsigned char *idata; /* input data */ dma_addr_t idata_dma; struct urb *irq_out; /* urb for interrupt out report */ struct usb_anchor irq_out_anchor; bool irq_out_active; /* we must not use an active URB */ u8 odata_serial; /* serial number for xbox one protocol */ unsigned char *odata; /* output data */ dma_addr_t odata_dma; spinlock_t odata_lock; struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS]; int last_out_packet; int init_seq; #if defined(CONFIG_JOYSTICK_XPAD_LEDS) struct xpad_led *led; #endif char phys[64]; /* physical device path */ int mapping; /* map d-pad to buttons or to axes */ int xtype; /* type of xbox device */ int packet_type; /* type of the extended packet */ int pad_nr; /* the order x360 pads were attached */ const char *name; /* name of the device */ struct work_struct work; /* init/remove device from callback */ time64_t mode_btn_down_ts; }; static int xpad_init_input(struct usb_xpad *xpad); static void xpad_deinit_input(struct usb_xpad *xpad); static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num); static void xpad360w_poweroff_controller(struct usb_xpad *xpad); /* * xpad_process_packet * * Completes a request by converting the data into events for the * input subsystem. * * The used report descriptor was taken from ITO Takayuki's website: * http://euc.jp/periphs/xbox-controller.ja.html */ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) { struct input_dev *dev = xpad->dev; if (!(xpad->mapping & MAP_STICKS_TO_NULL)) { /* left stick */ input_report_abs(dev, ABS_X, (__s16) le16_to_cpup((__le16 *)(data + 12))); input_report_abs(dev, ABS_Y, ~(__s16) le16_to_cpup((__le16 *)(data + 14))); /* right stick */ input_report_abs(dev, ABS_RX, (__s16) le16_to_cpup((__le16 *)(data + 16))); input_report_abs(dev, ABS_RY, ~(__s16) le16_to_cpup((__le16 *)(data + 18))); } /* triggers left/right */ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) { input_report_key(dev, BTN_TL2, data[10]); input_report_key(dev, BTN_TR2, data[11]); } else { input_report_abs(dev, ABS_Z, data[10]); input_report_abs(dev, ABS_RZ, data[11]); } /* digital pad */ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) { /* dpad as buttons (left, right, up, down) */ input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & BIT(2)); input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & BIT(3)); input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & BIT(0)); input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & BIT(1)); } else { input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04)); input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01)); } /* start/back buttons and stick press left/right */ input_report_key(dev, BTN_START, data[2] & BIT(4)); input_report_key(dev, BTN_SELECT, data[2] & BIT(5)); input_report_key(dev, BTN_THUMBL, data[2] & BIT(6)); input_report_key(dev, BTN_THUMBR, data[2] & BIT(7)); /* "analog" buttons A, B, X, Y */ input_report_key(dev, BTN_A, data[4]); input_report_key(dev, BTN_B, data[5]); input_report_key(dev, BTN_X, data[6]); input_report_key(dev, BTN_Y, data[7]); /* "analog" buttons black, white */ input_report_key(dev, BTN_C, data[8]); input_report_key(dev, BTN_Z, data[9]); input_sync(dev); } /* * xpad360_process_packet * * Completes a request by converting the data into events for the * input subsystem. It is version for xbox 360 controller * * The used report descriptor was taken from: * http://www.free60.org/wiki/Gamepad */ static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev, u16 cmd, unsigned char *data) { /* valid pad data */ if (data[0] != 0x00) return; /* digital pad */ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) { /* dpad as buttons (left, right, up, down) */ input_report_key(dev, BTN_TRIGGER_HAPPY1, data[2] & BIT(2)); input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & BIT(3)); input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & BIT(0)); input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & BIT(1)); } /* * This should be a simple else block. However historically * xbox360w has mapped DPAD to buttons while xbox360 did not. This * made no sense, but now we can not just switch back and have to * support both behaviors. */ if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) || xpad->xtype == XTYPE_XBOX360W) { input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04)); input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01)); } /* start/back buttons */ input_report_key(dev, BTN_START, data[2] & BIT(4)); input_report_key(dev, BTN_SELECT, data[2] & BIT(5)); /* stick press left/right */ input_report_key(dev, BTN_THUMBL, data[2] & BIT(6)); input_report_key(dev, BTN_THUMBR, data[2] & BIT(7)); /* buttons A,B,X,Y,TL,TR and MODE */ input_report_key(dev, BTN_A, data[3] & BIT(4)); input_report_key(dev, BTN_B, data[3] & BIT(5)); input_report_key(dev, BTN_X, data[3] & BIT(6)); input_report_key(dev, BTN_Y, data[3] & BIT(7)); input_report_key(dev, BTN_TL, data[3] & BIT(0)); input_report_key(dev, BTN_TR, data[3] & BIT(1)); input_report_key(dev, BTN_MODE, data[3] & BIT(2)); if (!(xpad->mapping & MAP_STICKS_TO_NULL)) { /* left stick */ input_report_abs(dev, ABS_X, (__s16) le16_to_cpup((__le16 *)(data + 6))); input_report_abs(dev, ABS_Y, ~(__s16) le16_to_cpup((__le16 *)(data + 8))); /* right stick */ input_report_abs(dev, ABS_RX, (__s16) le16_to_cpup((__le16 *)(data + 10))); input_report_abs(dev, ABS_RY, ~(__s16) le16_to_cpup((__le16 *)(data + 12))); } /* triggers left/right */ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) { input_report_key(dev, BTN_TL2, data[4]); input_report_key(dev, BTN_TR2, data[5]); } else { input_report_abs(dev, ABS_Z, data[4]); input_report_abs(dev, ABS_RZ, data[5]); } input_sync(dev); /* XBOX360W controllers can't be turned off without driver assistance */ if (xpad->xtype == XTYPE_XBOX360W) { if (xpad->mode_btn_down_ts > 0 && xpad->pad_present && ((ktime_get_seconds() - xpad->mode_btn_down_ts) >= XPAD360W_POWEROFF_TIMEOUT)) { xpad360w_poweroff_controller(xpad); xpad->mode_btn_down_ts = 0; return; } /* mode button down/up */ if (data[3] & BIT(2)) xpad->mode_btn_down_ts = ktime_get_seconds(); else xpad->mode_btn_down_ts = 0; } } static void xpad_presence_work(struct work_struct *work) { struct usb_xpad *xpad = container_of(work, struct usb_xpad, work); int error; if (xpad->pad_present) { error = xpad_init_input(xpad); if (error) { /* complain only, not much else we can do here */ dev_err(&xpad->dev->dev, "unable to init device: %d\n", error); } else { rcu_assign_pointer(xpad->x360w_dev, xpad->dev); } } else { RCU_INIT_POINTER(xpad->x360w_dev, NULL); synchronize_rcu(); /* * Now that we are sure xpad360w_process_packet is not * using input device we can get rid of it. */ xpad_deinit_input(xpad); } } /* * xpad360w_process_packet * * Completes a request by converting the data into events for the * input subsystem. It is version for xbox 360 wireless controller. * * Byte.Bit * 00.1 - Status change: The controller or headset has connected/disconnected * Bits 01.7 and 01.6 are valid * 01.7 - Controller present * 01.6 - Headset present * 01.1 - Pad state (Bytes 4+) valid * */ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) { struct input_dev *dev; bool present; /* Presence change */ if (data[0] & 0x08) { present = (data[1] & 0x80) != 0; if (xpad->pad_present != present) { xpad->pad_present = present; schedule_work(&xpad->work); } } /* Valid pad data */ if (data[1] != 0x1) return; rcu_read_lock(); dev = rcu_dereference(xpad->x360w_dev); if (dev) xpad360_process_packet(xpad, dev, cmd, &data[4]); rcu_read_unlock(); } /* * xpadone_process_packet * * Completes a request by converting the data into events for the * input subsystem. This version is for the Xbox One controller. * * The report format was gleaned from * https://github.com/kylelemons/xbox/blob/master/xbox.go */ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) { struct input_dev *dev = xpad->dev; bool do_sync = false; /* the xbox button has its own special report */ if (data[0] == GIP_CMD_VIRTUAL_KEY) { /* * The Xbox One S controller requires these reports to be * acked otherwise it continues sending them forever and * won't report further mode button events. */ if (data[1] == (GIP_OPT_ACK | GIP_OPT_INTERNAL)) xpadone_ack_mode_report(xpad, data[2]); input_report_key(dev, BTN_MODE, data[4] & GENMASK(1, 0)); input_sync(dev); do_sync = true; } else if (data[0] == GIP_CMD_FIRMWARE) { /* Some packet formats force us to use this separate to poll paddle inputs */ if (xpad->packet_type == PKT_XBE2_FW_5_11) { /* Mute paddles if controller is in a custom profile slot * Checked by looking at the active profile slot to * verify it's the default slot */ if (data[19] != 0) data[18] = 0; /* Elite Series 2 split packet paddle bits */ input_report_key(dev, BTN_TRIGGER_HAPPY5, data[18] & BIT(0)); input_report_key(dev, BTN_TRIGGER_HAPPY6, data[18] & BIT(1)); input_report_key(dev, BTN_TRIGGER_HAPPY7, data[18] & BIT(2)); input_report_key(dev, BTN_TRIGGER_HAPPY8, data[18] & BIT(3)); do_sync = true; } } else if (data[0] == GIP_CMD_INPUT) { /* The main valid packet type for inputs */ /* menu/view buttons */ input_report_key(dev, BTN_START, data[4] & BIT(2)); input_report_key(dev, BTN_SELECT, data[4] & BIT(3)); if (xpad->mapping & MAP_SELECT_BUTTON) input_report_key(dev, KEY_RECORD, data[22] & BIT(0)); /* buttons A,B,X,Y */ input_report_key(dev, BTN_A, data[4] & BIT(4)); input_report_key(dev, BTN_B, data[4] & BIT(5)); input_report_key(dev, BTN_X, data[4] & BIT(6)); input_report_key(dev, BTN_Y, data[4] & BIT(7)); /* digital pad */ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) { /* dpad as buttons (left, right, up, down) */ input_report_key(dev, BTN_TRIGGER_HAPPY1, data[5] & BIT(2)); input_report_key(dev, BTN_TRIGGER_HAPPY2, data[5] & BIT(3)); input_report_key(dev, BTN_TRIGGER_HAPPY3, data[5] & BIT(0)); input_report_key(dev, BTN_TRIGGER_HAPPY4, data[5] & BIT(1)); } else { input_report_abs(dev, ABS_HAT0X, !!(data[5] & 0x08) - !!(data[5] & 0x04)); input_report_abs(dev, ABS_HAT0Y, !!(data[5] & 0x02) - !!(data[5] & 0x01)); } /* TL/TR */ input_report_key(dev, BTN_TL, data[5] & BIT(4)); input_report_key(dev, BTN_TR, data[5] & BIT(5)); /* stick press left/right */ input_report_key(dev, BTN_THUMBL, data[5] & BIT(6)); input_report_key(dev, BTN_THUMBR, data[5] & BIT(7)); if (!(xpad->mapping & MAP_STICKS_TO_NULL)) { /* left stick */ input_report_abs(dev, ABS_X, (__s16) le16_to_cpup((__le16 *)(data + 10))); input_report_abs(dev, ABS_Y, ~(__s16) le16_to_cpup((__le16 *)(data + 12))); /* right stick */ input_report_abs(dev, ABS_RX, (__s16) le16_to_cpup((__le16 *)(data + 14))); input_report_abs(dev, ABS_RY, ~(__s16) le16_to_cpup((__le16 *)(data + 16))); } /* triggers left/right */ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) { input_report_key(dev, BTN_TL2, (__u16) le16_to_cpup((__le16 *)(data + 6))); input_report_key(dev, BTN_TR2, (__u16) le16_to_cpup((__le16 *)(data + 8))); } else { input_report_abs(dev, ABS_Z, (__u16) le16_to_cpup((__le16 *)(data + 6))); input_report_abs(dev, ABS_RZ, (__u16) le16_to_cpup((__le16 *)(data + 8))); } /* Profile button has a value of 0-3, so it is reported as an axis */ if (xpad->mapping & MAP_PROFILE_BUTTON) input_report_abs(dev, ABS_PROFILE, data[34]); /* paddle handling */ /* based on SDL's SDL_hidapi_xboxone.c */ if (xpad->mapping & MAP_PADDLES) { if (xpad->packet_type == PKT_XBE1) { /* Mute paddles if controller has a custom mapping applied. * Checked by comparing the current mapping * config against the factory mapping config */ if (memcmp(&data[4], &data[18], 2) != 0) data[32] = 0; /* OG Elite Series Controller paddle bits */ input_report_key(dev, BTN_TRIGGER_HAPPY5, data[32] & BIT(1)); input_report_key(dev, BTN_TRIGGER_HAPPY6, data[32] & BIT(3)); input_report_key(dev, BTN_TRIGGER_HAPPY7, data[32] & BIT(0)); input_report_key(dev, BTN_TRIGGER_HAPPY8, data[32] & BIT(2)); } else if (xpad->packet_type == PKT_XBE2_FW_OLD) { /* Mute paddles if controller has a custom mapping applied. * Checked by comparing the current mapping * config against the factory mapping config */ if (data[19] != 0) data[18] = 0; /* Elite Series 2 4.x firmware paddle bits */ input_report_key(dev, BTN_TRIGGER_HAPPY5, data[18] & BIT(0)); input_report_key(dev, BTN_TRIGGER_HAPPY6, data[18] & BIT(1)); input_report_key(dev, BTN_TRIGGER_HAPPY7, data[18] & BIT(2)); input_report_key(dev, BTN_TRIGGER_HAPPY8, data[18] & BIT(3)); } else if (xpad->packet_type == PKT_XBE2_FW_5_EARLY) { /* Mute paddles if controller has a custom mapping applied. * Checked by comparing the current mapping * config against the factory mapping config */ if (data[23] != 0) data[22] = 0; /* Elite Series 2 5.x firmware paddle bits * (before the packet was split) */ input_report_key(dev, BTN_TRIGGER_HAPPY5, data[22] & BIT(0)); input_report_key(dev, BTN_TRIGGER_HAPPY6, data[22] & BIT(1)); input_report_key(dev, BTN_TRIGGER_HAPPY7, data[22] & BIT(2)); input_report_key(dev, BTN_TRIGGER_HAPPY8, data[22] & BIT(3)); } } do_sync = true; } if (do_sync) input_sync(dev); } static void xpad_irq_in(struct urb *urb) { struct usb_xpad *xpad = urb->context; struct device *dev = &xpad->intf->dev; int retval, status; status = urb->status; switch (status) { case 0: /* success */ break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } switch (xpad->xtype) { case XTYPE_XBOX360: xpad360_process_packet(xpad, xpad->dev, 0, xpad->idata); break; case XTYPE_XBOX360W: xpad360w_process_packet(xpad, 0, xpad->idata); break; case XTYPE_XBOXONE: xpadone_process_packet(xpad, 0, xpad->idata); break; default: xpad_process_packet(xpad, 0, xpad->idata); } exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } /* Callers must hold xpad->odata_lock spinlock */ static bool xpad_prepare_next_init_packet(struct usb_xpad *xpad) { const struct xboxone_init_packet *init_packet; if (xpad->xtype != XTYPE_XBOXONE) return false; /* Perform initialization sequence for Xbox One pads that require it */ while (xpad->init_seq < ARRAY_SIZE(xboxone_init_packets)) { init_packet = &xboxone_init_packets[xpad->init_seq++]; if (init_packet->idVendor != 0 && init_packet->idVendor != xpad->dev->id.vendor) continue; if (init_packet->idProduct != 0 && init_packet->idProduct != xpad->dev->id.product) continue; /* This packet applies to our device, so prepare to send it */ memcpy(xpad->odata, init_packet->data, init_packet->len); xpad->irq_out->transfer_buffer_length = init_packet->len; /* Update packet with current sequence number */ xpad->odata[2] = xpad->odata_serial++; return true; } return false; } /* Callers must hold xpad->odata_lock spinlock */ static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad) { struct xpad_output_packet *pkt, *packet = NULL; int i; /* We may have init packets to send before we can send user commands */ if (xpad_prepare_next_init_packet(xpad)) return true; for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) { if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS) xpad->last_out_packet = 0; pkt = &xpad->out_packets[xpad->last_out_packet]; if (pkt->pending) { dev_dbg(&xpad->intf->dev, "%s - found pending output packet %d\n", __func__, xpad->last_out_packet); packet = pkt; break; } } if (packet) { memcpy(xpad->odata, packet->data, packet->len); xpad->irq_out->transfer_buffer_length = packet->len; packet->pending = false; return true; } return false; } /* Callers must hold xpad->odata_lock spinlock */ static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad) { int error; if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) { usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor); error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC); if (error) { dev_err(&xpad->intf->dev, "%s - usb_submit_urb failed with result %d\n", __func__, error); usb_unanchor_urb(xpad->irq_out); return -EIO; } xpad->irq_out_active = true; } return 0; } static void xpad_irq_out(struct urb *urb) { struct usb_xpad *xpad = urb->context; struct device *dev = &xpad->intf->dev; int status = urb->status; int error; unsigned long flags; spin_lock_irqsave(&xpad->odata_lock, flags); switch (status) { case 0: /* success */ xpad->irq_out_active = xpad_prepare_next_out_packet(xpad); break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); xpad->irq_out_active = false; break; default: dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); break; } if (xpad->irq_out_active) { usb_anchor_urb(urb, &xpad->irq_out_anchor); error = usb_submit_urb(urb, GFP_ATOMIC); if (error) { dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, error); usb_unanchor_urb(urb); xpad->irq_out_active = false; } } spin_unlock_irqrestore(&xpad->odata_lock, flags); } static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad, struct usb_endpoint_descriptor *ep_irq_out) { int error; if (xpad->xtype == XTYPE_UNKNOWN) return 0; init_usb_anchor(&xpad->irq_out_anchor); xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN, GFP_KERNEL, &xpad->odata_dma); if (!xpad->odata) return -ENOMEM; spin_lock_init(&xpad->odata_lock); xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL); if (!xpad->irq_out) { error = -ENOMEM; goto err_free_coherent; } usb_fill_int_urb(xpad->irq_out, xpad->udev, usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress), xpad->odata, XPAD_PKT_LEN, xpad_irq_out, xpad, ep_irq_out->bInterval); xpad->irq_out->transfer_dma = xpad->odata_dma; xpad->irq_out->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; return 0; err_free_coherent: usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma); return error; } static void xpad_stop_output(struct usb_xpad *xpad) { if (xpad->xtype != XTYPE_UNKNOWN) { if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor, 5000)) { dev_warn(&xpad->intf->dev, "timed out waiting for output URB to complete, killing\n"); usb_kill_anchored_urbs(&xpad->irq_out_anchor); } } } static void xpad_deinit_output(struct usb_xpad *xpad) { if (xpad->xtype != XTYPE_UNKNOWN) { usb_free_urb(xpad->irq_out); usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma); } } static int xpad_inquiry_pad_presence(struct usb_xpad *xpad) { struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_CMD_IDX]; unsigned long flags; int retval; spin_lock_irqsave(&xpad->odata_lock, flags); packet->data[0] = 0x08; packet->data[1] = 0x00; packet->data[2] = 0x0F; packet->data[3] = 0xC0; packet->data[4] = 0x00; packet->data[5] = 0x00; packet->data[6] = 0x00; packet->data[7] = 0x00; packet->data[8] = 0x00; packet->data[9] = 0x00; packet->data[10] = 0x00; packet->data[11] = 0x00; packet->len = 12; packet->pending = true; /* Reset the sequence so we send out presence first */ xpad->last_out_packet = -1; retval = xpad_try_sending_next_out_packet(xpad); spin_unlock_irqrestore(&xpad->odata_lock, flags); return retval; } static int xpad_start_xbox_one(struct usb_xpad *xpad) { unsigned long flags; int retval; if (usb_ifnum_to_if(xpad->udev, GIP_WIRED_INTF_AUDIO)) { /* * Explicitly disable the audio interface. This is needed * for some controllers, such as the PowerA Enhanced Wired * Controller for Series X|S (0x20d6:0x200e) to report the * guide button. */ retval = usb_set_interface(xpad->udev, GIP_WIRED_INTF_AUDIO, 0); if (retval) dev_warn(&xpad->dev->dev, "unable to disable audio interface: %d\n", retval); } spin_lock_irqsave(&xpad->odata_lock, flags); /* * Begin the init sequence by attempting to send a packet. * We will cycle through the init packet sequence before * sending any packets from the output ring. */ xpad->init_seq = 0; retval = xpad_try_sending_next_out_packet(xpad); spin_unlock_irqrestore(&xpad->odata_lock, flags); return retval; } static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num) { unsigned long flags; struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_CMD_IDX]; static const u8 mode_report_ack[] = { GIP_CMD_ACK, GIP_OPT_INTERNAL, GIP_SEQ0, GIP_PL_LEN(9), 0x00, GIP_CMD_VIRTUAL_KEY, GIP_OPT_INTERNAL, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00 }; spin_lock_irqsave(&xpad->odata_lock, flags); packet->len = sizeof(mode_report_ack); memcpy(packet->data, mode_report_ack, packet->len); packet->data[2] = seq_num; packet->pending = true; /* Reset the sequence so we send out the ack now */ xpad->last_out_packet = -1; xpad_try_sending_next_out_packet(xpad); spin_unlock_irqrestore(&xpad->odata_lock, flags); } #ifdef CONFIG_JOYSTICK_XPAD_FF static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect) { struct usb_xpad *xpad = input_get_drvdata(dev); struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_FF_IDX]; __u16 strong; __u16 weak; int retval; unsigned long flags; if (effect->type != FF_RUMBLE) return 0; strong = effect->u.rumble.strong_magnitude; weak = effect->u.rumble.weak_magnitude; spin_lock_irqsave(&xpad->odata_lock, flags); switch (xpad->xtype) { case XTYPE_XBOX: packet->data[0] = 0x00; packet->data[1] = 0x06; packet->data[2] = 0x00; packet->data[3] = strong / 256; /* left actuator */ packet->data[4] = 0x00; packet->data[5] = weak / 256; /* right actuator */ packet->len = 6; packet->pending = true; break; case XTYPE_XBOX360: packet->data[0] = 0x00; packet->data[1] = 0x08; packet->data[2] = 0x00; packet->data[3] = strong / 256; /* left actuator? */ packet->data[4] = weak / 256; /* right actuator? */ packet->data[5] = 0x00; packet->data[6] = 0x00; packet->data[7] = 0x00; packet->len = 8; packet->pending = true; break; case XTYPE_XBOX360W: packet->data[0] = 0x00; packet->data[1] = 0x01; packet->data[2] = 0x0F; packet->data[3] = 0xC0; packet->data[4] = 0x00; packet->data[5] = strong / 256; packet->data[6] = weak / 256; packet->data[7] = 0x00; packet->data[8] = 0x00; packet->data[9] = 0x00; packet->data[10] = 0x00; packet->data[11] = 0x00; packet->len = 12; packet->pending = true; break; case XTYPE_XBOXONE: packet->data[0] = GIP_CMD_RUMBLE; /* activate rumble */ packet->data[1] = 0x00; packet->data[2] = xpad->odata_serial++; packet->data[3] = GIP_PL_LEN(9); packet->data[4] = 0x00; packet->data[5] = GIP_MOTOR_ALL; packet->data[6] = 0x00; /* left trigger */ packet->data[7] = 0x00; /* right trigger */ packet->data[8] = strong / 512; /* left actuator */ packet->data[9] = weak / 512; /* right actuator */ packet->data[10] = 0xFF; /* on period */ packet->data[11] = 0x00; /* off period */ packet->data[12] = 0xFF; /* repeat count */ packet->len = 13; packet->pending = true; break; default: dev_dbg(&xpad->dev->dev, "%s - rumble command sent to unsupported xpad type: %d\n", __func__, xpad->xtype); retval = -EINVAL; goto out; } retval = xpad_try_sending_next_out_packet(xpad); out: spin_unlock_irqrestore(&xpad->odata_lock, flags); return retval; } static int xpad_init_ff(struct usb_xpad *xpad) { if (xpad->xtype == XTYPE_UNKNOWN) return 0; input_set_capability(xpad->dev, EV_FF, FF_RUMBLE); return input_ff_create_memless(xpad->dev, NULL, xpad_play_effect); } #else static int xpad_init_ff(struct usb_xpad *xpad) { return 0; } #endif #if defined(CONFIG_JOYSTICK_XPAD_LEDS) #include #include static DEFINE_IDA(xpad_pad_seq); struct xpad_led { char name[16]; struct led_classdev led_cdev; struct usb_xpad *xpad; }; /* * set the LEDs on Xbox 360 / Wireless Controllers * @param command * 0: off * 1: all blink, then previous setting * 2: 1/top-left blink, then on * 3: 2/top-right blink, then on * 4: 3/bottom-left blink, then on * 5: 4/bottom-right blink, then on * 6: 1/top-left on * 7: 2/top-right on * 8: 3/bottom-left on * 9: 4/bottom-right on * 10: rotate * 11: blink, based on previous setting * 12: slow blink, based on previous setting * 13: rotate with two lights * 14: persistent slow all blink * 15: blink once, then previous setting */ static void xpad_send_led_command(struct usb_xpad *xpad, int command) { struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_LED_IDX]; unsigned long flags; command %= 16; spin_lock_irqsave(&xpad->odata_lock, flags); switch (xpad->xtype) { case XTYPE_XBOX360: packet->data[0] = 0x01; packet->data[1] = 0x03; packet->data[2] = command; packet->len = 3; packet->pending = true; break; case XTYPE_XBOX360W: packet->data[0] = 0x00; packet->data[1] = 0x00; packet->data[2] = 0x08; packet->data[3] = 0x40 + command; packet->data[4] = 0x00; packet->data[5] = 0x00; packet->data[6] = 0x00; packet->data[7] = 0x00; packet->data[8] = 0x00; packet->data[9] = 0x00; packet->data[10] = 0x00; packet->data[11] = 0x00; packet->len = 12; packet->pending = true; break; } xpad_try_sending_next_out_packet(xpad); spin_unlock_irqrestore(&xpad->odata_lock, flags); } /* * Light up the segment corresponding to the pad number on * Xbox 360 Controllers. */ static void xpad_identify_controller(struct usb_xpad *xpad) { led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4) + 2); } static void xpad_led_set(struct led_classdev *led_cdev, enum led_brightness value) { struct xpad_led *xpad_led = container_of(led_cdev, struct xpad_led, led_cdev); xpad_send_led_command(xpad_led->xpad, value); } static int xpad_led_probe(struct usb_xpad *xpad) { struct xpad_led *led; struct led_classdev *led_cdev; int error; if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX360W) return 0; xpad->led = led = kzalloc(sizeof(struct xpad_led), GFP_KERNEL); if (!led) return -ENOMEM; xpad->pad_nr = ida_simple_get(&xpad_pad_seq, 0, 0, GFP_KERNEL); if (xpad->pad_nr < 0) { error = xpad->pad_nr; goto err_free_mem; } snprintf(led->name, sizeof(led->name), "xpad%d", xpad->pad_nr); led->xpad = xpad; led_cdev = &led->led_cdev; led_cdev->name = led->name; led_cdev->brightness_set = xpad_led_set; led_cdev->flags = LED_CORE_SUSPENDRESUME; error = led_classdev_register(&xpad->udev->dev, led_cdev); if (error) goto err_free_id; xpad_identify_controller(xpad); return 0; err_free_id: ida_simple_remove(&xpad_pad_seq, xpad->pad_nr); err_free_mem: kfree(led); xpad->led = NULL; return error; } static void xpad_led_disconnect(struct usb_xpad *xpad) { struct xpad_led *xpad_led = xpad->led; if (xpad_led) { led_classdev_unregister(&xpad_led->led_cdev); ida_simple_remove(&xpad_pad_seq, xpad->pad_nr); kfree(xpad_led); } } #else static int xpad_led_probe(struct usb_xpad *xpad) { return 0; } static void xpad_led_disconnect(struct usb_xpad *xpad) { } #endif static int xpad_start_input(struct usb_xpad *xpad) { int error; if (usb_submit_urb(xpad->irq_in, GFP_KERNEL)) return -EIO; if (xpad->xtype == XTYPE_XBOXONE) { error = xpad_start_xbox_one(xpad); if (error) { usb_kill_urb(xpad->irq_in); return error; } } if (xpad->xtype == XTYPE_XBOX360) { /* * Some third-party controllers Xbox 360-style controllers * require this message to finish initialization. */ u8 dummy[20]; error = usb_control_msg_recv(xpad->udev, 0, /* bRequest */ 0x01, /* bmRequestType */ USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_INTERFACE, /* wValue */ 0x100, /* wIndex */ 0x00, dummy, sizeof(dummy), 25, GFP_KERNEL); if (error) dev_warn(&xpad->dev->dev, "unable to receive magic message: %d\n", error); } return 0; } static void xpad_stop_input(struct usb_xpad *xpad) { usb_kill_urb(xpad->irq_in); } static void xpad360w_poweroff_controller(struct usb_xpad *xpad) { unsigned long flags; struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_CMD_IDX]; spin_lock_irqsave(&xpad->odata_lock, flags); packet->data[0] = 0x00; packet->data[1] = 0x00; packet->data[2] = 0x08; packet->data[3] = 0xC0; packet->data[4] = 0x00; packet->data[5] = 0x00; packet->data[6] = 0x00; packet->data[7] = 0x00; packet->data[8] = 0x00; packet->data[9] = 0x00; packet->data[10] = 0x00; packet->data[11] = 0x00; packet->len = 12; packet->pending = true; /* Reset the sequence so we send out poweroff now */ xpad->last_out_packet = -1; xpad_try_sending_next_out_packet(xpad); spin_unlock_irqrestore(&xpad->odata_lock, flags); } static int xpad360w_start_input(struct usb_xpad *xpad) { int error; error = usb_submit_urb(xpad->irq_in, GFP_KERNEL); if (error) return -EIO; /* * Send presence packet. * This will force the controller to resend connection packets. * This is useful in the case we activate the module after the * adapter has been plugged in, as it won't automatically * send us info about the controllers. */ error = xpad_inquiry_pad_presence(xpad); if (error) { usb_kill_urb(xpad->irq_in); return error; } return 0; } static void xpad360w_stop_input(struct usb_xpad *xpad) { usb_kill_urb(xpad->irq_in); /* Make sure we are done with presence work if it was scheduled */ flush_work(&xpad->work); } static int xpad_open(struct input_dev *dev) { struct usb_xpad *xpad = input_get_drvdata(dev); return xpad_start_input(xpad); } static void xpad_close(struct input_dev *dev) { struct usb_xpad *xpad = input_get_drvdata(dev); xpad_stop_input(xpad); } static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) { struct usb_xpad *xpad = input_get_drvdata(input_dev); switch (abs) { case ABS_X: case ABS_Y: case ABS_RX: case ABS_RY: /* the two sticks */ input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128); break; case ABS_Z: case ABS_RZ: /* the triggers (if mapped to axes) */ if (xpad->xtype == XTYPE_XBOXONE) input_set_abs_params(input_dev, abs, 0, 1023, 0, 0); else input_set_abs_params(input_dev, abs, 0, 255, 0, 0); break; case ABS_HAT0X: case ABS_HAT0Y: /* the d-pad (only if dpad is mapped to axes */ input_set_abs_params(input_dev, abs, -1, 1, 0, 0); break; case ABS_PROFILE: /* 4 value profile button (such as on XAC) */ input_set_abs_params(input_dev, abs, 0, 4, 0, 0); break; default: input_set_abs_params(input_dev, abs, 0, 0, 0, 0); break; } } static void xpad_deinit_input(struct usb_xpad *xpad) { if (xpad->input_created) { xpad->input_created = false; xpad_led_disconnect(xpad); input_unregister_device(xpad->dev); } } static int xpad_init_input(struct usb_xpad *xpad) { struct input_dev *input_dev; int i, error; input_dev = input_allocate_device(); if (!input_dev) return -ENOMEM; xpad->dev = input_dev; input_dev->name = xpad->name; input_dev->phys = xpad->phys; usb_to_input_id(xpad->udev, &input_dev->id); if (xpad->xtype == XTYPE_XBOX360W) { /* x360w controllers and the receiver have different ids */ input_dev->id.product = 0x02a1; } input_dev->dev.parent = &xpad->intf->dev; input_set_drvdata(input_dev, xpad); if (xpad->xtype != XTYPE_XBOX360W) { input_dev->open = xpad_open; input_dev->close = xpad_close; } if (!(xpad->mapping & MAP_STICKS_TO_NULL)) { /* set up axes */ for (i = 0; xpad_abs[i] >= 0; i++) xpad_set_up_abs(input_dev, xpad_abs[i]); } /* set up standard buttons */ for (i = 0; xpad_common_btn[i] >= 0; i++) input_set_capability(input_dev, EV_KEY, xpad_common_btn[i]); /* set up model-specific ones */ if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W || xpad->xtype == XTYPE_XBOXONE) { for (i = 0; xpad360_btn[i] >= 0; i++) input_set_capability(input_dev, EV_KEY, xpad360_btn[i]); if (xpad->mapping & MAP_SELECT_BUTTON) input_set_capability(input_dev, EV_KEY, KEY_RECORD); } else { for (i = 0; xpad_btn[i] >= 0; i++) input_set_capability(input_dev, EV_KEY, xpad_btn[i]); } if (xpad->mapping & MAP_DPAD_TO_BUTTONS) { for (i = 0; xpad_btn_pad[i] >= 0; i++) input_set_capability(input_dev, EV_KEY, xpad_btn_pad[i]); } /* set up paddles if the controller has them */ if (xpad->mapping & MAP_PADDLES) { for (i = 0; xpad_btn_paddles[i] >= 0; i++) input_set_capability(input_dev, EV_KEY, xpad_btn_paddles[i]); } /* * This should be a simple else block. However historically * xbox360w has mapped DPAD to buttons while xbox360 did not. This * made no sense, but now we can not just switch back and have to * support both behaviors. */ if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) || xpad->xtype == XTYPE_XBOX360W) { for (i = 0; xpad_abs_pad[i] >= 0; i++) xpad_set_up_abs(input_dev, xpad_abs_pad[i]); } if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) { for (i = 0; xpad_btn_triggers[i] >= 0; i++) input_set_capability(input_dev, EV_KEY, xpad_btn_triggers[i]); } else { for (i = 0; xpad_abs_triggers[i] >= 0; i++) xpad_set_up_abs(input_dev, xpad_abs_triggers[i]); } /* setup profile button as an axis with 4 possible values */ if (xpad->mapping & MAP_PROFILE_BUTTON) xpad_set_up_abs(input_dev, ABS_PROFILE); error = xpad_init_ff(xpad); if (error) goto err_free_input; error = xpad_led_probe(xpad); if (error) goto err_destroy_ff; error = input_register_device(xpad->dev); if (error) goto err_disconnect_led; xpad->input_created = true; return 0; err_disconnect_led: xpad_led_disconnect(xpad); err_destroy_ff: input_ff_destroy(input_dev); err_free_input: input_free_device(input_dev); return error; } static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(intf); struct usb_xpad *xpad; struct usb_endpoint_descriptor *ep_irq_in, *ep_irq_out; int i, error; if (intf->cur_altsetting->desc.bNumEndpoints != 2) return -ENODEV; for (i = 0; xpad_device[i].idVendor; i++) { if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) && (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct)) break; } xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL); if (!xpad) return -ENOMEM; usb_make_path(udev, xpad->phys, sizeof(xpad->phys)); strlcat(xpad->phys, "/input0", sizeof(xpad->phys)); xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN, GFP_KERNEL, &xpad->idata_dma); if (!xpad->idata) { error = -ENOMEM; goto err_free_mem; } xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL); if (!xpad->irq_in) { error = -ENOMEM; goto err_free_idata; } xpad->udev = udev; xpad->intf = intf; xpad->mapping = xpad_device[i].mapping; xpad->xtype = xpad_device[i].xtype; xpad->name = xpad_device[i].name; xpad->packet_type = PKT_XB; INIT_WORK(&xpad->work, xpad_presence_work); if (xpad->xtype == XTYPE_UNKNOWN) { if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) { if (intf->cur_altsetting->desc.bInterfaceProtocol == 129) xpad->xtype = XTYPE_XBOX360W; else if (intf->cur_altsetting->desc.bInterfaceProtocol == 208) xpad->xtype = XTYPE_XBOXONE; else xpad->xtype = XTYPE_XBOX360; } else { xpad->xtype = XTYPE_XBOX; } if (dpad_to_buttons) xpad->mapping |= MAP_DPAD_TO_BUTTONS; if (triggers_to_buttons) xpad->mapping |= MAP_TRIGGERS_TO_BUTTONS; if (sticks_to_null) xpad->mapping |= MAP_STICKS_TO_NULL; } if (xpad->xtype == XTYPE_XBOXONE && intf->cur_altsetting->desc.bInterfaceNumber != GIP_WIRED_INTF_DATA) { /* * The Xbox One controller lists three interfaces all with the * same interface class, subclass and protocol. Differentiate by * interface number. */ error = -ENODEV; goto err_free_in_urb; } ep_irq_in = ep_irq_out = NULL; for (i = 0; i < 2; i++) { struct usb_endpoint_descriptor *ep = &intf->cur_altsetting->endpoint[i].desc; if (usb_endpoint_xfer_int(ep)) { if (usb_endpoint_dir_in(ep)) ep_irq_in = ep; else ep_irq_out = ep; } } if (!ep_irq_in || !ep_irq_out) { error = -ENODEV; goto err_free_in_urb; } error = xpad_init_output(intf, xpad, ep_irq_out); if (error) goto err_free_in_urb; usb_fill_int_urb(xpad->irq_in, udev, usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), xpad->idata, XPAD_PKT_LEN, xpad_irq_in, xpad, ep_irq_in->bInterval); xpad->irq_in->transfer_dma = xpad->idata_dma; xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; usb_set_intfdata(intf, xpad); /* Packet type detection */ if (le16_to_cpu(udev->descriptor.idVendor) == 0x045e) { /* Microsoft controllers */ if (le16_to_cpu(udev->descriptor.idProduct) == 0x02e3) { /* The original elite controller always uses the oldest * type of extended packet */ xpad->packet_type = PKT_XBE1; } else if (le16_to_cpu(udev->descriptor.idProduct) == 0x0b00) { /* The elite 2 controller has seen multiple packet * revisions. These are tied to specific firmware * versions */ if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x0500) { /* This is the format that the Elite 2 used * prior to the BLE update */ xpad->packet_type = PKT_XBE2_FW_OLD; } else if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x050b) { /* This is the format that the Elite 2 used * prior to the update that split the packet */ xpad->packet_type = PKT_XBE2_FW_5_EARLY; } else { /* The split packet format that was introduced * in firmware v5.11 */ xpad->packet_type = PKT_XBE2_FW_5_11; } } } if (xpad->xtype == XTYPE_XBOX360W) { /* * Submit the int URB immediately rather than waiting for open * because we get status messages from the device whether * or not any controllers are attached. In fact, it's * exactly the message that a controller has arrived that * we're waiting for. */ error = xpad360w_start_input(xpad); if (error) goto err_deinit_output; /* * Wireless controllers require RESET_RESUME to work properly * after suspend. Ideally this quirk should be in usb core * quirk list, but we have too many vendors producing these * controllers and we'd need to maintain 2 identical lists * here in this driver and in usb core. */ udev->quirks |= USB_QUIRK_RESET_RESUME; } else { error = xpad_init_input(xpad); if (error) goto err_deinit_output; } return 0; err_deinit_output: xpad_deinit_output(xpad); err_free_in_urb: usb_free_urb(xpad->irq_in); err_free_idata: usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); err_free_mem: kfree(xpad); return error; } static void xpad_disconnect(struct usb_interface *intf) { struct usb_xpad *xpad = usb_get_intfdata(intf); if (xpad->xtype == XTYPE_XBOX360W) xpad360w_stop_input(xpad); xpad_deinit_input(xpad); /* * Now that both input device and LED device are gone we can * stop output URB. */ xpad_stop_output(xpad); xpad_deinit_output(xpad); usb_free_urb(xpad->irq_in); usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); kfree(xpad); usb_set_intfdata(intf, NULL); } static int xpad_suspend(struct usb_interface *intf, pm_message_t message) { struct usb_xpad *xpad = usb_get_intfdata(intf); struct input_dev *input = xpad->dev; if (xpad->xtype == XTYPE_XBOX360W) { /* * Wireless controllers always listen to input so * they are notified when controller shows up * or goes away. */ xpad360w_stop_input(xpad); /* * The wireless adapter is going off now, so the * gamepads are going to become disconnected. * Unless explicitly disabled, power them down * so they don't just sit there flashing. */ if (auto_poweroff && xpad->pad_present) xpad360w_poweroff_controller(xpad); } else { mutex_lock(&input->mutex); if (input_device_enabled(input)) xpad_stop_input(xpad); mutex_unlock(&input->mutex); } xpad_stop_output(xpad); return 0; } static int xpad_resume(struct usb_interface *intf) { struct usb_xpad *xpad = usb_get_intfdata(intf); struct input_dev *input = xpad->dev; int retval = 0; if (xpad->xtype == XTYPE_XBOX360W) { retval = xpad360w_start_input(xpad); } else { mutex_lock(&input->mutex); if (input_device_enabled(input)) { retval = xpad_start_input(xpad); } else if (xpad->xtype == XTYPE_XBOXONE) { /* * Even if there are no users, we'll send Xbox One pads * the startup sequence so they don't sit there and * blink until somebody opens the input device again. */ retval = xpad_start_xbox_one(xpad); } mutex_unlock(&input->mutex); } return retval; } static struct usb_driver xpad_driver = { .name = "xpad", .probe = xpad_probe, .disconnect = xpad_disconnect, .suspend = xpad_suspend, .resume = xpad_resume, .id_table = xpad_table, }; module_usb_driver(xpad_driver); MODULE_AUTHOR("Marko Friedemann "); MODULE_DESCRIPTION("Xbox pad driver"); MODULE_LICENSE("GPL");