#ifndef _QIB_KERNEL_H #define _QIB_KERNEL_H /* * Copyright (c) 2012 - 2017 Intel Corporation. All rights reserved. * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved. * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ /* * This header file is the base header file for qlogic_ib kernel code * qib_user.h serves a similar purpose for user code. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "qib_common.h" #include "qib_verbs.h" /* only s/w major version of QLogic_IB we can handle */ #define QIB_CHIP_VERS_MAJ 2U /* don't care about this except printing */ #define QIB_CHIP_VERS_MIN 0U /* The Organization Unique Identifier (Mfg code), and its position in GUID */ #define QIB_OUI 0x001175 #define QIB_OUI_LSB 40 /* * per driver stats, either not device nor port-specific, or * summed over all of the devices and ports. * They are described by name via ipathfs filesystem, so layout * and number of elements can change without breaking compatibility. * If members are added or deleted qib_statnames[] in qib_fs.c must * change to match. */ struct qlogic_ib_stats { __u64 sps_ints; /* number of interrupts handled */ __u64 sps_errints; /* number of error interrupts */ __u64 sps_txerrs; /* tx-related packet errors */ __u64 sps_rcverrs; /* non-crc rcv packet errors */ __u64 sps_hwerrs; /* hardware errors reported (parity, etc.) */ __u64 sps_nopiobufs; /* no pio bufs avail from kernel */ __u64 sps_ctxts; /* number of contexts currently open */ __u64 sps_lenerrs; /* number of kernel packets where RHF != LRH len */ __u64 sps_buffull; __u64 sps_hdrfull; }; extern struct qlogic_ib_stats qib_stats; extern const struct pci_error_handlers qib_pci_err_handler; #define QIB_CHIP_SWVERSION QIB_CHIP_VERS_MAJ /* * First-cut critierion for "device is active" is * two thousand dwords combined Tx, Rx traffic per * 5-second interval. SMA packets are 64 dwords, * and occur "a few per second", presumably each way. */ #define QIB_TRAFFIC_ACTIVE_THRESHOLD (2000) /* * Below contains all data related to a single context (formerly called port). */ #ifdef CONFIG_DEBUG_FS struct qib_opcode_stats_perctx; #endif struct qib_ctxtdata { void **rcvegrbuf; dma_addr_t *rcvegrbuf_phys; /* rcvhdrq base, needs mmap before useful */ void *rcvhdrq; /* kernel virtual address where hdrqtail is updated */ void *rcvhdrtail_kvaddr; /* * temp buffer for expected send setup, allocated at open, instead * of each setup call */ void *tid_pg_list; /* * Shared page for kernel to signal user processes that send buffers * need disarming. The process should call QIB_CMD_DISARM_BUFS * or QIB_CMD_ACK_EVENT with IPATH_EVENT_DISARM_BUFS set. */ unsigned long *user_event_mask; /* when waiting for rcv or pioavail */ wait_queue_head_t wait; /* * rcvegr bufs base, physical, must fit * in 44 bits so 32 bit programs mmap64 44 bit works) */ dma_addr_t rcvegr_phys; /* mmap of hdrq, must fit in 44 bits */ dma_addr_t rcvhdrq_phys; dma_addr_t rcvhdrqtailaddr_phys; /* * number of opens (including slave sub-contexts) on this instance * (ignoring forks, dup, etc. for now) */ int cnt; /* * how much space to leave at start of eager TID entries for * protocol use, on each TID */ /* instead of calculating it */ unsigned ctxt; /* local node of context */ int node_id; /* non-zero if ctxt is being shared. */ u16 subctxt_cnt; /* non-zero if ctxt is being shared. */ u16 subctxt_id; /* number of eager TID entries. */ u16 rcvegrcnt; /* index of first eager TID entry. */ u16 rcvegr_tid_base; /* number of pio bufs for this ctxt (all procs, if shared) */ u32 piocnt; /* first pio buffer for this ctxt */ u32 pio_base; /* chip offset of PIO buffers for this ctxt */ u32 piobufs; /* how many alloc_pages() chunks in rcvegrbuf_pages */ u32 rcvegrbuf_chunks; /* how many egrbufs per chunk */ u16 rcvegrbufs_perchunk; /* ilog2 of above */ u16 rcvegrbufs_perchunk_shift; /* order for rcvegrbuf_pages */ size_t rcvegrbuf_size; /* rcvhdrq size (for freeing) */ size_t rcvhdrq_size; /* per-context flags for fileops/intr communication */ unsigned long flag; /* next expected TID to check when looking for free */ u32 tidcursor; /* WAIT_RCV that timed out, no interrupt */ u32 rcvwait_to; /* WAIT_PIO that timed out, no interrupt */ u32 piowait_to; /* WAIT_RCV already happened, no wait */ u32 rcvnowait; /* WAIT_PIO already happened, no wait */ u32 pionowait; /* total number of polled urgent packets */ u32 urgent; /* saved total number of polled urgent packets for poll edge trigger */ u32 urgent_poll; /* pid of process using this ctxt */ pid_t pid; pid_t subpid[QLOGIC_IB_MAX_SUBCTXT]; /* same size as task_struct .comm[], command that opened context */ char comm[16]; /* pkeys set by this use of this ctxt */ u16 pkeys[4]; /* so file ops can get at unit */ struct qib_devdata *dd; /* so funcs that need physical port can get it easily */ struct qib_pportdata *ppd; /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */ void *subctxt_uregbase; /* An array of pages for the eager receive buffers * N */ void *subctxt_rcvegrbuf; /* An array of pages for the eager header queue entries * N */ void *subctxt_rcvhdr_base; /* The version of the library which opened this ctxt */ u32 userversion; /* Bitmask of active slaves */ u32 active_slaves; /* Type of packets or conditions we want to poll for */ u16 poll_type; /* receive packet sequence counter */ u8 seq_cnt; u8 redirect_seq_cnt; /* ctxt rcvhdrq head offset */ u32 head; /* QPs waiting for context processing */ struct list_head qp_wait_list; #ifdef CONFIG_DEBUG_FS /* verbs stats per CTX */ struct qib_opcode_stats_perctx *opstats; #endif }; struct rvt_sge_state; struct qib_sdma_txreq { int flags; int sg_count; dma_addr_t addr; void (*callback)(struct qib_sdma_txreq *, int); u16 start_idx; /* sdma private */ u16 next_descq_idx; /* sdma private */ struct list_head list; /* sdma private */ }; struct qib_sdma_desc { __le64 qw[2]; }; struct qib_verbs_txreq { struct qib_sdma_txreq txreq; struct rvt_qp *qp; struct rvt_swqe *wqe; u32 dwords; u16 hdr_dwords; u16 hdr_inx; struct qib_pio_header *align_buf; struct rvt_mregion *mr; struct rvt_sge_state *ss; }; #define QIB_SDMA_TXREQ_F_USELARGEBUF 0x1 #define QIB_SDMA_TXREQ_F_HEADTOHOST 0x2 #define QIB_SDMA_TXREQ_F_INTREQ 0x4 #define QIB_SDMA_TXREQ_F_FREEBUF 0x8 #define QIB_SDMA_TXREQ_F_FREEDESC 0x10 #define QIB_SDMA_TXREQ_S_OK 0 #define QIB_SDMA_TXREQ_S_SENDERROR 1 #define QIB_SDMA_TXREQ_S_ABORTED 2 #define QIB_SDMA_TXREQ_S_SHUTDOWN 3 /* * Get/Set IB link-level config parameters for f_get/set_ib_cfg() * Mostly for MADs that set or query link parameters, also ipath * config interfaces */ #define QIB_IB_CFG_LIDLMC 0 /* LID (LS16b) and Mask (MS16b) */ #define QIB_IB_CFG_LWID_ENB 2 /* allowed Link-width */ #define QIB_IB_CFG_LWID 3 /* currently active Link-width */ #define QIB_IB_CFG_SPD_ENB 4 /* allowed Link speeds */ #define QIB_IB_CFG_SPD 5 /* current Link spd */ #define QIB_IB_CFG_RXPOL_ENB 6 /* Auto-RX-polarity enable */ #define QIB_IB_CFG_LREV_ENB 7 /* Auto-Lane-reversal enable */ #define QIB_IB_CFG_LINKLATENCY 8 /* Link Latency (IB1.2 only) */ #define QIB_IB_CFG_HRTBT 9 /* IB heartbeat off/enable/auto; DDR/QDR only */ #define QIB_IB_CFG_OP_VLS 10 /* operational VLs */ #define QIB_IB_CFG_VL_HIGH_CAP 11 /* num of VL high priority weights */ #define QIB_IB_CFG_VL_LOW_CAP 12 /* num of VL low priority weights */ #define QIB_IB_CFG_OVERRUN_THRESH 13 /* IB overrun threshold */ #define QIB_IB_CFG_PHYERR_THRESH 14 /* IB PHY error threshold */ #define QIB_IB_CFG_LINKDEFAULT 15 /* IB link default (sleep/poll) */ #define QIB_IB_CFG_PKEYS 16 /* update partition keys */ #define QIB_IB_CFG_MTU 17 /* update MTU in IBC */ #define QIB_IB_CFG_LSTATE 18 /* update linkcmd and linkinitcmd in IBC */ #define QIB_IB_CFG_VL_HIGH_LIMIT 19 #define QIB_IB_CFG_PMA_TICKS 20 /* PMA sample tick resolution */ #define QIB_IB_CFG_PORT 21 /* switch port we are connected to */ /* * for CFG_LSTATE: LINKCMD in upper 16 bits, LINKINITCMD in lower 16 * IB_LINKINITCMD_POLL and SLEEP are also used as set/get values for * QIB_IB_CFG_LINKDEFAULT cmd */ #define IB_LINKCMD_DOWN (0 << 16) #define IB_LINKCMD_ARMED (1 << 16) #define IB_LINKCMD_ACTIVE (2 << 16) #define IB_LINKINITCMD_NOP 0 #define IB_LINKINITCMD_POLL 1 #define IB_LINKINITCMD_SLEEP 2 #define IB_LINKINITCMD_DISABLE 3 /* * valid states passed to qib_set_linkstate() user call */ #define QIB_IB_LINKDOWN 0 #define QIB_IB_LINKARM 1 #define QIB_IB_LINKACTIVE 2 #define QIB_IB_LINKDOWN_ONLY 3 #define QIB_IB_LINKDOWN_SLEEP 4 #define QIB_IB_LINKDOWN_DISABLE 5 /* * These 7 values (SDR, DDR, and QDR may be ORed for auto-speed * negotiation) are used for the 3rd argument to path_f_set_ib_cfg * with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They * are also the the possible values for qib_link_speed_enabled and active * The values were chosen to match values used within the IB spec. */ #define QIB_IB_SDR 1 #define QIB_IB_DDR 2 #define QIB_IB_QDR 4 #define QIB_DEFAULT_MTU 4096 /* max number of IB ports supported per HCA */ #define QIB_MAX_IB_PORTS 2 /* * Possible IB config parameters for f_get/set_ib_table() */ #define QIB_IB_TBL_VL_HIGH_ARB 1 /* Get/set VL high priority weights */ #define QIB_IB_TBL_VL_LOW_ARB 2 /* Get/set VL low priority weights */ /* * Possible "operations" for f_rcvctrl(ppd, op, ctxt) * these are bits so they can be combined, e.g. * QIB_RCVCTRL_INTRAVAIL_ENB | QIB_RCVCTRL_CTXT_ENB */ #define QIB_RCVCTRL_TAILUPD_ENB 0x01 #define QIB_RCVCTRL_TAILUPD_DIS 0x02 #define QIB_RCVCTRL_CTXT_ENB 0x04 #define QIB_RCVCTRL_CTXT_DIS 0x08 #define QIB_RCVCTRL_INTRAVAIL_ENB 0x10 #define QIB_RCVCTRL_INTRAVAIL_DIS 0x20 #define QIB_RCVCTRL_PKEY_ENB 0x40 /* Note, default is enabled */ #define QIB_RCVCTRL_PKEY_DIS 0x80 #define QIB_RCVCTRL_BP_ENB 0x0100 #define QIB_RCVCTRL_BP_DIS 0x0200 #define QIB_RCVCTRL_TIDFLOW_ENB 0x0400 #define QIB_RCVCTRL_TIDFLOW_DIS 0x0800 /* * Possible "operations" for f_sendctrl(ppd, op, var) * these are bits so they can be combined, e.g. * QIB_SENDCTRL_BUFAVAIL_ENB | QIB_SENDCTRL_ENB * Some operations (e.g. DISARM, ABORT) are known to * be "one-shot", so do not modify shadow. */ #define QIB_SENDCTRL_DISARM (0x1000) #define QIB_SENDCTRL_DISARM_BUF(bufn) ((bufn) | QIB_SENDCTRL_DISARM) /* available (0x2000) */ #define QIB_SENDCTRL_AVAIL_DIS (0x4000) #define QIB_SENDCTRL_AVAIL_ENB (0x8000) #define QIB_SENDCTRL_AVAIL_BLIP (0x10000) #define QIB_SENDCTRL_SEND_DIS (0x20000) #define QIB_SENDCTRL_SEND_ENB (0x40000) #define QIB_SENDCTRL_FLUSH (0x80000) #define QIB_SENDCTRL_CLEAR (0x100000) #define QIB_SENDCTRL_DISARM_ALL (0x200000) /* * These are the generic indices for requesting per-port * counter values via the f_portcntr function. They * are always returned as 64 bit values, although most * are 32 bit counters. */ /* send-related counters */ #define QIBPORTCNTR_PKTSEND 0U #define QIBPORTCNTR_WORDSEND 1U #define QIBPORTCNTR_PSXMITDATA 2U #define QIBPORTCNTR_PSXMITPKTS 3U #define QIBPORTCNTR_PSXMITWAIT 4U #define QIBPORTCNTR_SENDSTALL 5U /* receive-related counters */ #define QIBPORTCNTR_PKTRCV 6U #define QIBPORTCNTR_PSRCVDATA 7U #define QIBPORTCNTR_PSRCVPKTS 8U #define QIBPORTCNTR_RCVEBP 9U #define QIBPORTCNTR_RCVOVFL 10U #define QIBPORTCNTR_WORDRCV 11U /* IB link related error counters */ #define QIBPORTCNTR_RXLOCALPHYERR 12U #define QIBPORTCNTR_RXVLERR 13U #define QIBPORTCNTR_ERRICRC 14U #define QIBPORTCNTR_ERRVCRC 15U #define QIBPORTCNTR_ERRLPCRC 16U #define QIBPORTCNTR_BADFORMAT 17U #define QIBPORTCNTR_ERR_RLEN 18U #define QIBPORTCNTR_IBSYMBOLERR 19U #define QIBPORTCNTR_INVALIDRLEN 20U #define QIBPORTCNTR_UNSUPVL 21U #define QIBPORTCNTR_EXCESSBUFOVFL 22U #define QIBPORTCNTR_ERRLINK 23U #define QIBPORTCNTR_IBLINKDOWN 24U #define QIBPORTCNTR_IBLINKERRRECOV 25U #define QIBPORTCNTR_LLI 26U /* other error counters */ #define QIBPORTCNTR_RXDROPPKT 27U #define QIBPORTCNTR_VL15PKTDROP 28U #define QIBPORTCNTR_ERRPKEY 29U #define QIBPORTCNTR_KHDROVFL 30U /* sampling counters (these are actually control registers) */ #define QIBPORTCNTR_PSINTERVAL 31U #define QIBPORTCNTR_PSSTART 32U #define QIBPORTCNTR_PSSTAT 33U /* how often we check for packet activity for "power on hours (in seconds) */ #define ACTIVITY_TIMER 5 #define MAX_NAME_SIZE 64 #ifdef CONFIG_INFINIBAND_QIB_DCA struct qib_irq_notify; #endif struct qib_msix_entry { void *arg; #ifdef CONFIG_INFINIBAND_QIB_DCA int dca; int rcv; struct qib_irq_notify *notifier; #endif cpumask_var_t mask; }; /* Below is an opaque struct. Each chip (device) can maintain * private data needed for its operation, but not germane to the * rest of the driver. For convenience, we define another that * is chip-specific, per-port */ struct qib_chip_specific; struct qib_chipport_specific; enum qib_sdma_states { qib_sdma_state_s00_hw_down, qib_sdma_state_s10_hw_start_up_wait, qib_sdma_state_s20_idle, qib_sdma_state_s30_sw_clean_up_wait, qib_sdma_state_s40_hw_clean_up_wait, qib_sdma_state_s50_hw_halt_wait, qib_sdma_state_s99_running, }; enum qib_sdma_events { qib_sdma_event_e00_go_hw_down, qib_sdma_event_e10_go_hw_start, qib_sdma_event_e20_hw_started, qib_sdma_event_e30_go_running, qib_sdma_event_e40_sw_cleaned, qib_sdma_event_e50_hw_cleaned, qib_sdma_event_e60_hw_halted, qib_sdma_event_e70_go_idle, qib_sdma_event_e7220_err_halted, qib_sdma_event_e7322_err_halted, qib_sdma_event_e90_timer_tick, }; struct sdma_set_state_action { unsigned op_enable:1; unsigned op_intenable:1; unsigned op_halt:1; unsigned op_drain:1; unsigned go_s99_running_tofalse:1; unsigned go_s99_running_totrue:1; }; struct qib_sdma_state { struct kref kref; struct completion comp; enum qib_sdma_states current_state; struct sdma_set_state_action *set_state_action; unsigned current_op; unsigned go_s99_running; unsigned first_sendbuf; unsigned last_sendbuf; /* really last +1 */ /* debugging/devel */ enum qib_sdma_states previous_state; unsigned previous_op; enum qib_sdma_events last_event; }; struct xmit_wait { struct timer_list timer; u64 counter; u8 flags; struct cache { u64 psxmitdata; u64 psrcvdata; u64 psxmitpkts; u64 psrcvpkts; u64 psxmitwait; } counter_cache; }; /* * The structure below encapsulates data relevant to a physical IB Port. * Current chips support only one such port, but the separation * clarifies things a bit. Note that to conform to IB conventions, * port-numbers are one-based. The first or only port is port1. */ struct qib_pportdata { struct qib_ibport ibport_data; struct qib_devdata *dd; struct qib_chippport_specific *cpspec; /* chip-specific per-port */ struct kobject pport_kobj; struct kobject pport_cc_kobj; struct kobject sl2vl_kobj; struct kobject diagc_kobj; /* GUID for this interface, in network order */ __be64 guid; /* QIB_POLL, etc. link-state specific flags, per port */ u32 lflags; /* qib_lflags driver is waiting for */ u32 state_wanted; spinlock_t lflags_lock; /* ref count for each pkey */ atomic_t pkeyrefs[4]; /* * this address is mapped readonly into user processes so they can * get status cheaply, whenever they want. One qword of status per port */ u64 *statusp; /* SendDMA related entries */ /* read mostly */ struct qib_sdma_desc *sdma_descq; struct workqueue_struct *qib_wq; struct qib_sdma_state sdma_state; dma_addr_t sdma_descq_phys; volatile __le64 *sdma_head_dma; /* DMA'ed by chip */ dma_addr_t sdma_head_phys; u16 sdma_descq_cnt; /* read/write using lock */ spinlock_t sdma_lock ____cacheline_aligned_in_smp; struct list_head sdma_activelist; struct list_head sdma_userpending; u64 sdma_descq_added; u64 sdma_descq_removed; u16 sdma_descq_tail; u16 sdma_descq_head; u8 sdma_generation; u8 sdma_intrequest; struct tasklet_struct sdma_sw_clean_up_task ____cacheline_aligned_in_smp; wait_queue_head_t state_wait; /* for state_wanted */ /* HoL blocking for SMP replies */ unsigned hol_state; struct timer_list hol_timer; /* * Shadow copies of registers; size indicates read access size. * Most of them are readonly, but some are write-only register, * where we manipulate the bits in the shadow copy, and then write * the shadow copy to qlogic_ib. * * We deliberately make most of these 32 bits, since they have * restricted range. For any that we read, we won't to generate 32 * bit accesses, since Opteron will generate 2 separate 32 bit HT * transactions for a 64 bit read, and we want to avoid unnecessary * bus transactions. */ /* This is the 64 bit group */ /* last ibcstatus. opaque outside chip-specific code */ u64 lastibcstat; /* these are the "32 bit" regs */ /* * the following two are 32-bit bitmasks, but {test,clear,set}_bit * all expect bit fields to be "unsigned long" */ unsigned long p_rcvctrl; /* shadow per-port rcvctrl */ unsigned long p_sendctrl; /* shadow per-port sendctrl */ u32 ibmtu; /* The MTU programmed for this unit */ /* * Current max size IB packet (in bytes) including IB headers, that * we can send. Changes when ibmtu changes. */ u32 ibmaxlen; /* * ibmaxlen at init time, limited by chip and by receive buffer * size. Not changed after init. */ u32 init_ibmaxlen; /* LID programmed for this instance */ u16 lid; /* list of pkeys programmed; 0 if not set */ u16 pkeys[4]; /* LID mask control */ u8 lmc; u8 link_width_supported; u16 link_speed_supported; u8 link_width_enabled; u16 link_speed_enabled; u8 link_width_active; u16 link_speed_active; u8 vls_supported; u8 vls_operational; /* Rx Polarity inversion (compensate for ~tx on partner) */ u8 rx_pol_inv; u8 hw_pidx; /* physical port index */ u32 port; /* IB port number and index into dd->pports - 1 */ u8 delay_mult; /* used to override LED behavior */ u8 led_override; /* Substituted for normal value, if non-zero */ u16 led_override_timeoff; /* delta to next timer event */ u8 led_override_vals[2]; /* Alternates per blink-frame */ u8 led_override_phase; /* Just counts, LSB picks from vals[] */ atomic_t led_override_timer_active; /* Used to flash LEDs in override mode */ struct timer_list led_override_timer; struct xmit_wait cong_stats; struct timer_list symerr_clear_timer; /* Synchronize access between driver writes and sysfs reads */ spinlock_t cc_shadow_lock ____cacheline_aligned_in_smp; /* Shadow copy of the congestion control table */ struct cc_table_shadow *ccti_entries_shadow; /* Shadow copy of the congestion control entries */ struct ib_cc_congestion_setting_attr_shadow *congestion_entries_shadow; /* List of congestion control table entries */ struct ib_cc_table_entry_shadow *ccti_entries; /* 16 congestion entries with each entry corresponding to a SL */ struct ib_cc_congestion_entry_shadow *congestion_entries; /* Maximum number of congestion control entries that the agent expects * the manager to send. */ u16 cc_supported_table_entries; /* Total number of congestion control table entries */ u16 total_cct_entry; /* Bit map identifying service level */ u16 cc_sl_control_map; /* maximum congestion control table index */ u16 ccti_limit; /* CA's max number of 64 entry units in the congestion control table */ u8 cc_max_table_entries; }; /* Observers. Not to be taken lightly, possibly not to ship. */ /* * If a diag read or write is to (bottom <= offset <= top), * the "hoook" is called, allowing, e.g. shadows to be * updated in sync with the driver. struct diag_observer * is the "visible" part. */ struct diag_observer; typedef int (*diag_hook) (struct qib_devdata *dd, const struct diag_observer *op, u32 offs, u64 *data, u64 mask, int only_32); struct diag_observer { diag_hook hook; u32 bottom; u32 top; }; extern int qib_register_observer(struct qib_devdata *dd, const struct diag_observer *op); /* Only declared here, not defined. Private to diags */ struct diag_observer_list_elt; /* device data struct now contains only "general per-device" info. * fields related to a physical IB port are in a qib_pportdata struct, * described above) while fields only used by a particular chip-type are in * a qib_chipdata struct, whose contents are opaque to this file. */ struct qib_devdata { struct qib_ibdev verbs_dev; /* must be first */ struct list_head list; /* pointers to related structs for this device */ /* pci access data structure */ struct pci_dev *pcidev; struct cdev *user_cdev; struct cdev *diag_cdev; struct device *user_device; struct device *diag_device; /* mem-mapped pointer to base of chip regs */ u64 __iomem *kregbase; /* end of mem-mapped chip space excluding sendbuf and user regs */ u64 __iomem *kregend; /* physical address of chip for io_remap, etc. */ resource_size_t physaddr; /* qib_cfgctxts pointers */ struct qib_ctxtdata **rcd; /* Receive Context Data */ /* qib_pportdata, points to array of (physical) port-specific * data structs, indexed by pidx (0..n-1) */ struct qib_pportdata *pport; struct qib_chip_specific *cspec; /* chip-specific */ /* kvirt address of 1st 2k pio buffer */ void __iomem *pio2kbase; /* kvirt address of 1st 4k pio buffer */ void __iomem *pio4kbase; /* mem-mapped pointer to base of PIO buffers (if using WC PAT) */ void __iomem *piobase; /* mem-mapped pointer to base of user chip regs (if using WC PAT) */ u64 __iomem *userbase; void __iomem *piovl15base; /* base of VL15 buffers, if not WC */ /* * points to area where PIOavail registers will be DMA'ed. * Has to be on a page of it's own, because the page will be * mapped into user program space. This copy is *ONLY* ever * written by DMA, not by the driver! Need a copy per device * when we get to multiple devices */ volatile __le64 *pioavailregs_dma; /* DMA'ed by chip */ /* physical address where updates occur */ dma_addr_t pioavailregs_phys; /* device-specific implementations of functions needed by * common code. Contrary to previous consensus, we can't * really just point to a device-specific table, because we * may need to "bend", e.g. *_f_put_tid */ /* fallback to alternate interrupt type if possible */ int (*f_intr_fallback)(struct qib_devdata *); /* hard reset chip */ int (*f_reset)(struct qib_devdata *); void (*f_quiet_serdes)(struct qib_pportdata *); int (*f_bringup_serdes)(struct qib_pportdata *); int (*f_early_init)(struct qib_devdata *); void (*f_clear_tids)(struct qib_devdata *, struct qib_ctxtdata *); void (*f_put_tid)(struct qib_devdata *, u64 __iomem*, u32, unsigned long); void (*f_cleanup)(struct qib_devdata *); void (*f_setextled)(struct qib_pportdata *, u32); /* fill out chip-specific fields */ int (*f_get_base_info)(struct qib_ctxtdata *, struct qib_base_info *); /* free irq */ void (*f_free_irq)(struct qib_devdata *); struct qib_message_header *(*f_get_msgheader) (struct qib_devdata *, __le32 *); void (*f_config_ctxts)(struct qib_devdata *); int (*f_get_ib_cfg)(struct qib_pportdata *, int); int (*f_set_ib_cfg)(struct qib_pportdata *, int, u32); int (*f_set_ib_loopback)(struct qib_pportdata *, const char *); int (*f_get_ib_table)(struct qib_pportdata *, int, void *); int (*f_set_ib_table)(struct qib_pportdata *, int, void *); u32 (*f_iblink_state)(u64); u8 (*f_ibphys_portstate)(u64); void (*f_xgxs_reset)(struct qib_pportdata *); /* per chip actions needed for IB Link up/down changes */ int (*f_ib_updown)(struct qib_pportdata *, int, u64); u32 __iomem *(*f_getsendbuf)(struct qib_pportdata *, u64, u32 *); /* Read/modify/write of GPIO pins (potentially chip-specific */ int (*f_gpio_mod)(struct qib_devdata *dd, u32 out, u32 dir, u32 mask); /* Enable writes to config EEPROM (if supported) */ int (*f_eeprom_wen)(struct qib_devdata *dd, int wen); /* * modify rcvctrl shadow[s] and write to appropriate chip-regs. * see above QIB_RCVCTRL_xxx_ENB/DIS for operations. * (ctxt == -1) means "all contexts", only meaningful for * clearing. Could remove if chip_spec shutdown properly done. */ void (*f_rcvctrl)(struct qib_pportdata *, unsigned int op, int ctxt); /* Read/modify/write sendctrl appropriately for op and port. */ void (*f_sendctrl)(struct qib_pportdata *, u32 op); void (*f_set_intr_state)(struct qib_devdata *, u32); void (*f_set_armlaunch)(struct qib_devdata *, u32); void (*f_wantpiobuf_intr)(struct qib_devdata *, u32); int (*f_late_initreg)(struct qib_devdata *); int (*f_init_sdma_regs)(struct qib_pportdata *); u16 (*f_sdma_gethead)(struct qib_pportdata *); int (*f_sdma_busy)(struct qib_pportdata *); void (*f_sdma_update_tail)(struct qib_pportdata *, u16); void (*f_sdma_set_desc_cnt)(struct qib_pportdata *, unsigned); void (*f_sdma_sendctrl)(struct qib_pportdata *, unsigned); void (*f_sdma_hw_clean_up)(struct qib_pportdata *); void (*f_sdma_hw_start_up)(struct qib_pportdata *); void (*f_sdma_init_early)(struct qib_pportdata *); void (*f_set_cntr_sample)(struct qib_pportdata *, u32, u32); void (*f_update_usrhead)(struct qib_ctxtdata *, u64, u32, u32, u32); u32 (*f_hdrqempty)(struct qib_ctxtdata *); u64 (*f_portcntr)(struct qib_pportdata *, u32); u32 (*f_read_cntrs)(struct qib_devdata *, loff_t, char **, u64 **); u32 (*f_read_portcntrs)(struct qib_devdata *, loff_t, u32, char **, u64 **); u32 (*f_setpbc_control)(struct qib_pportdata *, u32, u8, u8); void (*f_initvl15_bufs)(struct qib_devdata *); void (*f_init_ctxt)(struct qib_ctxtdata *); void (*f_txchk_change)(struct qib_devdata *, u32, u32, u32, struct qib_ctxtdata *); void (*f_writescratch)(struct qib_devdata *, u32); int (*f_tempsense_rd)(struct qib_devdata *, int regnum); #ifdef CONFIG_INFINIBAND_QIB_DCA int (*f_notify_dca)(struct qib_devdata *, unsigned long event); #endif char *boardname; /* human readable board info */ /* template for writing TIDs */ u64 tidtemplate; /* value to write to free TIDs */ u64 tidinvalid; /* number of registers used for pioavail */ u32 pioavregs; /* device (not port) flags, basically device capabilities */ u32 flags; /* last buffer for user use */ u32 lastctxt_piobuf; /* reset value */ u64 z_int_counter; /* percpu intcounter */ u64 __percpu *int_counter; /* pio bufs allocated per ctxt */ u32 pbufsctxt; /* if remainder on bufs/ctxt, ctxts < extrabuf get 1 extra */ u32 ctxts_extrabuf; /* * number of ctxts configured as max; zero is set to number chip * supports, less gives more pio bufs/ctxt, etc. */ u32 cfgctxts; /* * number of ctxts available for PSM open */ u32 freectxts; /* * hint that we should update pioavailshadow before * looking for a PIO buffer */ u32 upd_pio_shadow; /* internal debugging stats */ u32 maxpkts_call; u32 avgpkts_call; u64 nopiobufs; /* PCI Vendor ID (here for NodeInfo) */ u16 vendorid; /* PCI Device ID (here for NodeInfo) */ u16 deviceid; /* for write combining settings */ int wc_cookie; unsigned long wc_base; unsigned long wc_len; /* shadow copy of struct page *'s for exp tid pages */ struct page **pageshadow; /* shadow copy of dma handles for exp tid pages */ dma_addr_t *physshadow; u64 __iomem *egrtidbase; spinlock_t sendctrl_lock; /* protect changes to sendctrl shadow */ /* around rcd and (user ctxts) ctxt_cnt use (intr vs free) */ spinlock_t uctxt_lock; /* rcd and user context changes */ /* * per unit status, see also portdata statusp * mapped readonly into user processes so they can get unit and * IB link status cheaply */ u64 *devstatusp; char *freezemsg; /* freeze msg if hw error put chip in freeze */ u32 freezelen; /* max length of freezemsg */ /* timer used to prevent stats overflow, error throttling, etc. */ struct timer_list stats_timer; /* timer to verify interrupts work, and fallback if possible */ struct timer_list intrchk_timer; unsigned long ureg_align; /* user register alignment */ /* * Protects pioavailshadow, pioavailkernel, pio_need_disarm, and * pio_writing. */ spinlock_t pioavail_lock; /* * index of last buffer to optimize search for next */ u32 last_pio; /* * min kernel pio buffer to optimize search */ u32 min_kernel_pio; /* * Shadow copies of registers; size indicates read access size. * Most of them are readonly, but some are write-only register, * where we manipulate the bits in the shadow copy, and then write * the shadow copy to qlogic_ib. * * We deliberately make most of these 32 bits, since they have * restricted range. For any that we read, we won't to generate 32 * bit accesses, since Opteron will generate 2 separate 32 bit HT * transactions for a 64 bit read, and we want to avoid unnecessary * bus transactions. */ /* This is the 64 bit group */ unsigned long pioavailshadow[6]; /* bitmap of send buffers available for the kernel to use with PIO. */ unsigned long pioavailkernel[6]; /* bitmap of send buffers which need to be disarmed. */ unsigned long pio_need_disarm[3]; /* bitmap of send buffers which are being written to. */ unsigned long pio_writing[3]; /* kr_revision shadow */ u64 revision; /* Base GUID for device (from eeprom, network order) */ __be64 base_guid; /* * kr_sendpiobufbase value (chip offset of pio buffers), and the * base of the 2KB buffer s(user processes only use 2K) */ u64 piobufbase; u32 pio2k_bufbase; /* these are the "32 bit" regs */ /* number of GUIDs in the flash for this interface */ u32 nguid; /* * the following two are 32-bit bitmasks, but {test,clear,set}_bit * all expect bit fields to be "unsigned long" */ unsigned long rcvctrl; /* shadow per device rcvctrl */ unsigned long sendctrl; /* shadow per device sendctrl */ /* value we put in kr_rcvhdrcnt */ u32 rcvhdrcnt; /* value we put in kr_rcvhdrsize */ u32 rcvhdrsize; /* value we put in kr_rcvhdrentsize */ u32 rcvhdrentsize; /* kr_ctxtcnt value */ u32 ctxtcnt; /* kr_pagealign value */ u32 palign; /* number of "2KB" PIO buffers */ u32 piobcnt2k; /* size in bytes of "2KB" PIO buffers */ u32 piosize2k; /* max usable size in dwords of a "2KB" PIO buffer before going "4KB" */ u32 piosize2kmax_dwords; /* number of "4KB" PIO buffers */ u32 piobcnt4k; /* size in bytes of "4KB" PIO buffers */ u32 piosize4k; /* kr_rcvegrbase value */ u32 rcvegrbase; /* kr_rcvtidbase value */ u32 rcvtidbase; /* kr_rcvtidcnt value */ u32 rcvtidcnt; /* kr_userregbase */ u32 uregbase; /* shadow the control register contents */ u32 control; /* chip address space used by 4k pio buffers */ u32 align4k; /* size of each rcvegrbuffer */ u16 rcvegrbufsize; /* log2 of above */ u16 rcvegrbufsize_shift; /* localbus width (1, 2,4,8,16,32) from config space */ u32 lbus_width; /* localbus speed in MHz */ u32 lbus_speed; int unit; /* unit # of this chip */ /* start of CHIP_SPEC move to chipspec, but need code changes */ /* low and high portions of MSI capability/vector */ u32 msi_lo; /* saved after PCIe init for restore after reset */ u32 msi_hi; /* MSI data (vector) saved for restore */ u16 msi_data; /* so we can rewrite it after a chip reset */ u32 pcibar0; /* so we can rewrite it after a chip reset */ u32 pcibar1; u64 rhdrhead_intr_off; /* * ASCII serial number, from flash, large enough for original * all digit strings, and longer QLogic serial number format */ u8 serial[16]; /* human readable board version */ u8 boardversion[96]; u8 lbus_info[32]; /* human readable localbus info */ /* chip major rev, from qib_revision */ u8 majrev; /* chip minor rev, from qib_revision */ u8 minrev; /* Misc small ints */ /* Number of physical ports available */ u8 num_pports; /* Lowest context number which can be used by user processes */ u8 first_user_ctxt; u8 n_krcv_queues; u8 qpn_mask; u8 skip_kctxt_mask; u16 rhf_offset; /* offset of RHF within receive header entry */ /* * GPIO pins for twsi-connected devices, and device code for eeprom */ u8 gpio_sda_num; u8 gpio_scl_num; u8 twsi_eeprom_dev; u8 board_atten; /* Support (including locks) for EEPROM logging of errors and time */ /* control access to actual counters, timer */ spinlock_t eep_st_lock; /* control high-level access to EEPROM */ struct mutex eep_lock; uint64_t traffic_wds; struct qib_diag_client *diag_client; spinlock_t qib_diag_trans_lock; /* protect diag observer ops */ struct diag_observer_list_elt *diag_observer_list; u8 psxmitwait_supported; /* cycle length of PS* counters in HW (in picoseconds) */ u16 psxmitwait_check_rate; /* high volume overflow errors defered to tasklet */ struct tasklet_struct error_tasklet; int assigned_node_id; /* NUMA node closest to HCA */ }; /* hol_state values */ #define QIB_HOL_UP 0 #define QIB_HOL_INIT 1 #define QIB_SDMA_SENDCTRL_OP_ENABLE (1U << 0) #define QIB_SDMA_SENDCTRL_OP_INTENABLE (1U << 1) #define QIB_SDMA_SENDCTRL_OP_HALT (1U << 2) #define QIB_SDMA_SENDCTRL_OP_CLEANUP (1U << 3) #define QIB_SDMA_SENDCTRL_OP_DRAIN (1U << 4) /* operation types for f_txchk_change() */ #define TXCHK_CHG_TYPE_DIS1 3 #define TXCHK_CHG_TYPE_ENAB1 2 #define TXCHK_CHG_TYPE_KERN 1 #define TXCHK_CHG_TYPE_USER 0 #define QIB_CHASE_TIME msecs_to_jiffies(145) #define QIB_CHASE_DIS_TIME msecs_to_jiffies(160) /* Private data for file operations */ struct qib_filedata { struct qib_ctxtdata *rcd; unsigned subctxt; unsigned tidcursor; struct qib_user_sdma_queue *pq; int rec_cpu_num; /* for cpu affinity; -1 if none */ }; extern struct xarray qib_dev_table; extern struct qib_devdata *qib_lookup(int unit); extern u32 qib_cpulist_count; extern unsigned long *qib_cpulist; extern unsigned qib_cc_table_size; int qib_init(struct qib_devdata *, int); int init_chip_wc_pat(struct qib_devdata *dd, u32); int qib_enable_wc(struct qib_devdata *dd); void qib_disable_wc(struct qib_devdata *dd); int qib_count_units(int *npresentp, int *nupp); int qib_count_active_units(void); int qib_cdev_init(int minor, const char *name, const struct file_operations *fops, struct cdev **cdevp, struct device **devp); void qib_cdev_cleanup(struct cdev **cdevp, struct device **devp); int qib_dev_init(void); void qib_dev_cleanup(void); int qib_diag_add(struct qib_devdata *); void qib_diag_remove(struct qib_devdata *); void qib_handle_e_ibstatuschanged(struct qib_pportdata *, u64); void qib_sdma_update_tail(struct qib_pportdata *, u16); /* hold sdma_lock */ int qib_decode_err(struct qib_devdata *dd, char *buf, size_t blen, u64 err); void qib_bad_intrstatus(struct qib_devdata *); void qib_handle_urcv(struct qib_devdata *, u64); /* clean up any per-chip chip-specific stuff */ void qib_chip_cleanup(struct qib_devdata *); /* clean up any chip type-specific stuff */ void qib_chip_done(void); /* check to see if we have to force ordering for write combining */ int qib_unordered_wc(void); void qib_pio_copy(void __iomem *to, const void *from, size_t count); void qib_disarm_piobufs(struct qib_devdata *, unsigned, unsigned); int qib_disarm_piobufs_ifneeded(struct qib_ctxtdata *); void qib_disarm_piobufs_set(struct qib_devdata *, unsigned long *, unsigned); void qib_cancel_sends(struct qib_pportdata *); int qib_create_rcvhdrq(struct qib_devdata *, struct qib_ctxtdata *); int qib_setup_eagerbufs(struct qib_ctxtdata *); void qib_set_ctxtcnt(struct qib_devdata *); int qib_create_ctxts(struct qib_devdata *dd); struct qib_ctxtdata *qib_create_ctxtdata(struct qib_pportdata *, u32, int); int qib_init_pportdata(struct qib_pportdata *, struct qib_devdata *, u8, u8); void qib_free_ctxtdata(struct qib_devdata *, struct qib_ctxtdata *); u32 qib_kreceive(struct qib_ctxtdata *, u32 *, u32 *); int qib_reset_device(int); int qib_wait_linkstate(struct qib_pportdata *, u32, int); int qib_set_linkstate(struct qib_pportdata *, u8); int qib_set_mtu(struct qib_pportdata *, u16); int qib_set_lid(struct qib_pportdata *, u32, u8); void qib_hol_down(struct qib_pportdata *); void qib_hol_init(struct qib_pportdata *); void qib_hol_up(struct qib_pportdata *); void qib_hol_event(struct timer_list *); void qib_disable_after_error(struct qib_devdata *); int qib_set_uevent_bits(struct qib_pportdata *, const int); /* for use in system calls, where we want to know device type, etc. */ #define ctxt_fp(fp) \ (((struct qib_filedata *)(fp)->private_data)->rcd) #define subctxt_fp(fp) \ (((struct qib_filedata *)(fp)->private_data)->subctxt) #define tidcursor_fp(fp) \ (((struct qib_filedata *)(fp)->private_data)->tidcursor) #define user_sdma_queue_fp(fp) \ (((struct qib_filedata *)(fp)->private_data)->pq) static inline struct qib_devdata *dd_from_ppd(struct qib_pportdata *ppd) { return ppd->dd; } static inline struct qib_devdata *dd_from_dev(struct qib_ibdev *dev) { return container_of(dev, struct qib_devdata, verbs_dev); } static inline struct qib_devdata *dd_from_ibdev(struct ib_device *ibdev) { return dd_from_dev(to_idev(ibdev)); } static inline struct qib_pportdata *ppd_from_ibp(struct qib_ibport *ibp) { return container_of(ibp, struct qib_pportdata, ibport_data); } static inline struct qib_ibport *to_iport(struct ib_device *ibdev, u32 port) { struct qib_devdata *dd = dd_from_ibdev(ibdev); u32 pidx = port - 1; /* IB number port from 1, hdw from 0 */ WARN_ON(pidx >= dd->num_pports); return &dd->pport[pidx].ibport_data; } /* * values for dd->flags (_device_ related flags) and */ #define QIB_HAS_LINK_LATENCY 0x1 /* supports link latency (IB 1.2) */ #define QIB_INITTED 0x2 /* chip and driver up and initted */ #define QIB_DOING_RESET 0x4 /* in the middle of doing chip reset */ #define QIB_PRESENT 0x8 /* chip accesses can be done */ #define QIB_PIO_FLUSH_WC 0x10 /* Needs Write combining flush for PIO */ #define QIB_HAS_THRESH_UPDATE 0x40 #define QIB_HAS_SDMA_TIMEOUT 0x80 #define QIB_USE_SPCL_TRIG 0x100 /* SpecialTrigger launch enabled */ #define QIB_NODMA_RTAIL 0x200 /* rcvhdrtail register DMA enabled */ #define QIB_HAS_INTX 0x800 /* Supports INTx interrupts */ #define QIB_HAS_SEND_DMA 0x1000 /* Supports Send DMA */ #define QIB_HAS_VLSUPP 0x2000 /* Supports multiple VLs; PBC different */ #define QIB_HAS_HDRSUPP 0x4000 /* Supports header suppression */ #define QIB_BADINTR 0x8000 /* severe interrupt problems */ #define QIB_DCA_ENABLED 0x10000 /* Direct Cache Access enabled */ #define QIB_HAS_QSFP 0x20000 /* device (card instance) has QSFP */ #define QIB_SHUTDOWN 0x40000 /* device is shutting down */ /* * values for ppd->lflags (_ib_port_ related flags) */ #define QIBL_LINKV 0x1 /* IB link state valid */ #define QIBL_LINKDOWN 0x8 /* IB link is down */ #define QIBL_LINKINIT 0x10 /* IB link level is up */ #define QIBL_LINKARMED 0x20 /* IB link is ARMED */ #define QIBL_LINKACTIVE 0x40 /* IB link is ACTIVE */ /* leave a gap for more IB-link state */ #define QIBL_IB_AUTONEG_INPROG 0x1000 /* non-IBTA DDR/QDR neg active */ #define QIBL_IB_AUTONEG_FAILED 0x2000 /* non-IBTA DDR/QDR neg failed */ #define QIBL_IB_LINK_DISABLED 0x4000 /* Linkdown-disable forced, * Do not try to bring up */ #define QIBL_IB_FORCE_NOTIFY 0x8000 /* force notify on next ib change */ /* IB dword length mask in PBC (lower 11 bits); same for all chips */ #define QIB_PBC_LENGTH_MASK ((1 << 11) - 1) /* ctxt_flag bit offsets */ /* waiting for a packet to arrive */ #define QIB_CTXT_WAITING_RCV 2 /* master has not finished initializing */ #define QIB_CTXT_MASTER_UNINIT 4 /* waiting for an urgent packet to arrive */ #define QIB_CTXT_WAITING_URG 5 /* free up any allocated data at closes */ void qib_free_data(struct qib_ctxtdata *dd); void qib_chg_pioavailkernel(struct qib_devdata *, unsigned, unsigned, u32, struct qib_ctxtdata *); struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *, const struct pci_device_id *); struct qib_devdata *qib_init_iba7220_funcs(struct pci_dev *, const struct pci_device_id *); struct qib_devdata *qib_init_iba6120_funcs(struct pci_dev *, const struct pci_device_id *); void qib_free_devdata(struct qib_devdata *); struct qib_devdata *qib_alloc_devdata(struct pci_dev *pdev, size_t extra); #define QIB_TWSI_NO_DEV 0xFF /* Below qib_twsi_ functions must be called with eep_lock held */ int qib_twsi_reset(struct qib_devdata *dd); int qib_twsi_blk_rd(struct qib_devdata *dd, int dev, int addr, void *buffer, int len); int qib_twsi_blk_wr(struct qib_devdata *dd, int dev, int addr, const void *buffer, int len); void qib_get_eeprom_info(struct qib_devdata *); void qib_dump_lookup_output_queue(struct qib_devdata *); void qib_force_pio_avail_update(struct qib_devdata *); void qib_clear_symerror_on_linkup(struct timer_list *t); /* * Set LED override, only the two LSBs have "public" meaning, but * any non-zero value substitutes them for the Link and LinkTrain * LED states. */ #define QIB_LED_PHYS 1 /* Physical (linktraining) GREEN LED */ #define QIB_LED_LOG 2 /* Logical (link) YELLOW LED */ void qib_set_led_override(struct qib_pportdata *ppd, unsigned int val); /* send dma routines */ int qib_setup_sdma(struct qib_pportdata *); void qib_teardown_sdma(struct qib_pportdata *); void __qib_sdma_intr(struct qib_pportdata *); void qib_sdma_intr(struct qib_pportdata *); void qib_user_sdma_send_desc(struct qib_pportdata *dd, struct list_head *pktlist); int qib_sdma_verbs_send(struct qib_pportdata *, struct rvt_sge_state *, u32, struct qib_verbs_txreq *); /* ppd->sdma_lock should be locked before calling this. */ int qib_sdma_make_progress(struct qib_pportdata *dd); /* must be called under qib_sdma_lock */ static inline u16 qib_sdma_descq_freecnt(const struct qib_pportdata *ppd) { return ppd->sdma_descq_cnt - (ppd->sdma_descq_added - ppd->sdma_descq_removed) - 1; } static inline int __qib_sdma_running(struct qib_pportdata *ppd) { return ppd->sdma_state.current_state == qib_sdma_state_s99_running; } int qib_sdma_running(struct qib_pportdata *); void dump_sdma_state(struct qib_pportdata *ppd); void __qib_sdma_process_event(struct qib_pportdata *, enum qib_sdma_events); void qib_sdma_process_event(struct qib_pportdata *, enum qib_sdma_events); /* * number of words used for protocol header if not set by qib_userinit(); */ #define QIB_DFLT_RCVHDRSIZE 9 /* * We need to be able to handle an IB header of at least 24 dwords. * We need the rcvhdrq large enough to handle largest IB header, but * still have room for a 2KB MTU standard IB packet. * Additionally, some processor/memory controller combinations * benefit quite strongly from having the DMA'ed data be cacheline * aligned and a cacheline multiple, so we set the size to 32 dwords * (2 64-byte primary cachelines for pretty much all processors of * interest). The alignment hurts nothing, other than using somewhat * more memory. */ #define QIB_RCVHDR_ENTSIZE 32 int qib_get_user_pages(unsigned long, size_t, struct page **); void qib_release_user_pages(struct page **, size_t); int qib_eeprom_read(struct qib_devdata *, u8, void *, int); int qib_eeprom_write(struct qib_devdata *, u8, const void *, int); u32 __iomem *qib_getsendbuf_range(struct qib_devdata *, u32 *, u32, u32); void qib_sendbuf_done(struct qib_devdata *, unsigned); static inline void qib_clear_rcvhdrtail(const struct qib_ctxtdata *rcd) { *((u64 *) rcd->rcvhdrtail_kvaddr) = 0ULL; } static inline u32 qib_get_rcvhdrtail(const struct qib_ctxtdata *rcd) { /* * volatile because it's a DMA target from the chip, routine is * inlined, and don't want register caching or reordering. */ return (u32) le64_to_cpu( *((volatile __le64 *)rcd->rcvhdrtail_kvaddr)); /* DMA'ed */ } /* * sysfs interface. */ extern const char ib_qib_version[]; extern const struct attribute_group qib_attr_group; int qib_device_create(struct qib_devdata *); void qib_device_remove(struct qib_devdata *); int qib_create_port_files(struct ib_device *ibdev, u32 port_num, struct kobject *kobj); void qib_verbs_unregister_sysfs(struct qib_devdata *); /* Hook for sysfs read of QSFP */ extern int qib_qsfp_dump(struct qib_pportdata *ppd, char *buf, int len); int __init qib_init_qibfs(void); int __exit qib_exit_qibfs(void); int qibfs_add(struct qib_devdata *); int qibfs_remove(struct qib_devdata *); int qib_pcie_init(struct pci_dev *, const struct pci_device_id *); int qib_pcie_ddinit(struct qib_devdata *, struct pci_dev *, const struct pci_device_id *); void qib_pcie_ddcleanup(struct qib_devdata *); int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent); void qib_free_irq(struct qib_devdata *dd); int qib_reinit_intr(struct qib_devdata *dd); void qib_pcie_getcmd(struct qib_devdata *, u16 *, u8 *, u8 *); void qib_pcie_reenable(struct qib_devdata *, u16, u8, u8); /* interrupts for device */ u64 qib_int_counter(struct qib_devdata *); /* interrupt for all devices */ u64 qib_sps_ints(void); /* * dma_addr wrappers - all 0's invalid for hw */ int qib_map_page(struct pci_dev *d, struct page *p, dma_addr_t *daddr); struct pci_dev *qib_get_pci_dev(struct rvt_dev_info *rdi); /* * Flush write combining store buffers (if present) and perform a write * barrier. */ static inline void qib_flush_wc(void) { #if defined(CONFIG_X86_64) asm volatile("sfence" : : : "memory"); #else wmb(); /* no reorder around wc flush */ #endif } /* global module parameter variables */ extern unsigned qib_ibmtu; extern ushort qib_cfgctxts; extern ushort qib_num_cfg_vls; extern ushort qib_mini_init; /* If set, do few (ideally 0) writes to chip */ extern unsigned qib_n_krcv_queues; extern unsigned qib_sdma_fetch_arb; extern unsigned qib_compat_ddr_negotiate; extern int qib_special_trigger; extern unsigned qib_numa_aware; extern struct mutex qib_mutex; /* Number of seconds before our card status check... */ #define STATUS_TIMEOUT 60 #define QIB_DRV_NAME "ib_qib" #define QIB_USER_MINOR_BASE 0 #define QIB_TRACE_MINOR 127 #define QIB_DIAGPKT_MINOR 128 #define QIB_DIAG_MINOR_BASE 129 #define QIB_NMINORS 255 #define PCI_VENDOR_ID_PATHSCALE 0x1fc1 #define PCI_VENDOR_ID_QLOGIC 0x1077 #define PCI_DEVICE_ID_QLOGIC_IB_6120 0x10 #define PCI_DEVICE_ID_QLOGIC_IB_7220 0x7220 #define PCI_DEVICE_ID_QLOGIC_IB_7322 0x7322 /* * qib_early_err is used (only!) to print early errors before devdata is * allocated, or when dd->pcidev may not be valid, and at the tail end of * cleanup when devdata may have been freed, etc. qib_dev_porterr is * the same as qib_dev_err, but is used when the message really needs * the IB port# to be definitive as to what's happening.. * All of these go to the trace log, and the trace log entry is done * first to avoid possible serial port delays from printk. */ #define qib_early_err(dev, fmt, ...) \ dev_err(dev, fmt, ##__VA_ARGS__) #define qib_dev_err(dd, fmt, ...) \ dev_err(&(dd)->pcidev->dev, "%s: " fmt, \ rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__) #define qib_dev_warn(dd, fmt, ...) \ dev_warn(&(dd)->pcidev->dev, "%s: " fmt, \ rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__) #define qib_dev_porterr(dd, port, fmt, ...) \ dev_err(&(dd)->pcidev->dev, "%s: IB%u:%u " fmt, \ rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), (dd)->unit, (port), \ ##__VA_ARGS__) #define qib_devinfo(pcidev, fmt, ...) \ dev_info(&(pcidev)->dev, fmt, ##__VA_ARGS__) /* * this is used for formatting hw error messages... */ struct qib_hwerror_msgs { u64 mask; const char *msg; size_t sz; }; #define QLOGIC_IB_HWE_MSG(a, b) { .mask = a, .msg = b } /* in qib_intr.c... */ void qib_format_hwerrors(u64 hwerrs, const struct qib_hwerror_msgs *hwerrmsgs, size_t nhwerrmsgs, char *msg, size_t lmsg); void qib_stop_send_queue(struct rvt_qp *qp); void qib_quiesce_qp(struct rvt_qp *qp); void qib_flush_qp_waiters(struct rvt_qp *qp); int qib_mtu_to_path_mtu(u32 mtu); u32 qib_mtu_from_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp, u32 pmtu); void qib_notify_error_qp(struct rvt_qp *qp); int qib_get_pmtu_from_attr(struct rvt_dev_info *rdi, struct rvt_qp *qp, struct ib_qp_attr *attr); #endif /* _QIB_KERNEL_H */