/* piix4.c - Part of lm_sensors, Linux kernel modules for hardware monitoring Copyright (c) 1998 - 2002 Frodo Looijaard and Philip Edelbrock This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Supports: Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface. */ #include #include #include #include #include #include #include #include #include #include #include #include #include struct sd { const unsigned short mfr; const unsigned short dev; const unsigned char fn; const char *name; }; /* PIIX4 SMBus address offsets */ #define SMBHSTSTS (0 + piix4_smba) #define SMBHSLVSTS (1 + piix4_smba) #define SMBHSTCNT (2 + piix4_smba) #define SMBHSTCMD (3 + piix4_smba) #define SMBHSTADD (4 + piix4_smba) #define SMBHSTDAT0 (5 + piix4_smba) #define SMBHSTDAT1 (6 + piix4_smba) #define SMBBLKDAT (7 + piix4_smba) #define SMBSLVCNT (8 + piix4_smba) #define SMBSHDWCMD (9 + piix4_smba) #define SMBSLVEVT (0xA + piix4_smba) #define SMBSLVDAT (0xC + piix4_smba) /* count for request_region */ #define SMBIOSIZE 8 /* PCI Address Constants */ #define SMBBA 0x090 #define SMBHSTCFG 0x0D2 #define SMBSLVC 0x0D3 #define SMBSHDW1 0x0D4 #define SMBSHDW2 0x0D5 #define SMBREV 0x0D6 /* Other settings */ #define MAX_TIMEOUT 500 #define ENABLE_INT9 0 /* PIIX4 constants */ #define PIIX4_QUICK 0x00 #define PIIX4_BYTE 0x04 #define PIIX4_BYTE_DATA 0x08 #define PIIX4_WORD_DATA 0x0C #define PIIX4_BLOCK_DATA 0x14 /* insmod parameters */ /* If force is set to anything different from 0, we forcibly enable the PIIX4. DANGEROUS! */ static int force; module_param (force, int, 0); MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); /* If force_addr is set to anything different from 0, we forcibly enable the PIIX4 at the given address. VERY DANGEROUS! */ static int force_addr; module_param (force_addr, int, 0); MODULE_PARM_DESC(force_addr, "Forcibly enable the PIIX4 at the given address. " "EXTREMELY DANGEROUS!"); /* If fix_hstcfg is set to anything different from 0, we reset one of the registers to be a valid value. */ static int fix_hstcfg; module_param (fix_hstcfg, int, 0); MODULE_PARM_DESC(fix_hstcfg, "Fix config register. Needed on some boards (Force CPCI735)."); static int piix4_transaction(void); static unsigned short piix4_smba; static struct pci_driver piix4_driver; static struct i2c_adapter piix4_adapter; static struct dmi_system_id __devinitdata piix4_dmi_table[] = { { .ident = "IBM", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, }, { }, }; static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id) { unsigned char temp; /* match up the function */ if (PCI_FUNC(PIIX4_dev->devfn) != id->driver_data) return -ENODEV; dev_info(&PIIX4_dev->dev, "Found %s device\n", pci_name(PIIX4_dev)); /* Don't access SMBus on IBM systems which get corrupted eeproms */ if (dmi_check_system(piix4_dmi_table) && PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) { dev_err(&PIIX4_dev->dev, "IBM Laptop detected; this module " "may corrupt your serial eeprom! Refusing to load " "module!\n"); return -EPERM; } /* Determine the address of the SMBus areas */ if (force_addr) { piix4_smba = force_addr & 0xfff0; force = 0; } else { pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba); piix4_smba &= 0xfff0; if(piix4_smba == 0) { dev_err(&PIIX4_dev->dev, "SMB base address " "uninitialized - upgrade BIOS or use " "force_addr=0xaddr\n"); return -ENODEV; } } if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n", piix4_smba); return -ENODEV; } pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp); /* Some BIOS will set up the chipset incorrectly and leave a register in an undefined state (causing I2C to act very strangely). */ if (temp & 0x02) { if (fix_hstcfg) { dev_info(&PIIX4_dev->dev, "Working around buggy BIOS " "(I2C)\n"); temp &= 0xfd; pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp); } else { dev_info(&PIIX4_dev->dev, "Unusual config register " "value\n"); dev_info(&PIIX4_dev->dev, "Try using fix_hstcfg=1 if " "you experience problems\n"); } } /* If force_addr is set, we program the new address here. Just to make sure, we disable the PIIX4 first. */ if (force_addr) { pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe); pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba); pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01); dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to " "new address %04x!\n", piix4_smba); } else if ((temp & 1) == 0) { if (force) { /* This should never need to be done, but has been * noted that many Dell machines have the SMBus * interface on the PIIX4 disabled!? NOTE: This assumes * I/O space and other allocations WERE done by the * Bios! Don't complain if your hardware does weird * things after enabling this. :') Check for Bios * updates before resorting to this. */ pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 1); dev_printk(KERN_NOTICE, &PIIX4_dev->dev, "WARNING: SMBus interface has been " "FORCEFULLY ENABLED!\n"); } else { dev_err(&PIIX4_dev->dev, "Host SMBus controller not enabled!\n"); release_region(piix4_smba, SMBIOSIZE); piix4_smba = 0; return -ENODEV; } } if ((temp & 0x0E) == 8) dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n"); else if ((temp & 0x0E) == 0) dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n"); else dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration " "(or code out of date)!\n"); pci_read_config_byte(PIIX4_dev, SMBREV, &temp); dev_dbg(&PIIX4_dev->dev, "SMBREV = 0x%X\n", temp); dev_dbg(&PIIX4_dev->dev, "SMBA = 0x%X\n", piix4_smba); return 0; } /* Another internally used function */ static int piix4_transaction(void) { int temp; int result = 0; int timeout = 0; dev_dbg(&piix4_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) != 0x00) { dev_dbg(&piix4_adapter.dev, "SMBus busy (%02x). " "Resetting...\n", temp); outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp); return -1; } else { dev_dbg(&piix4_adapter.dev, "Successfull!\n"); } } /* start the transaction by setting bit 6 */ outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */ do { msleep(1); temp = inb_p(SMBHSTSTS); } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_err(&piix4_adapter.dev, "SMBus Timeout!\n"); result = -1; } if (temp & 0x10) { result = -1; dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n"); } if (temp & 0x08) { result = -1; dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be " "locked until next hard reset. (sorry!)\n"); /* Clock stops and slave is stuck in mid-transmission */ } if (temp & 0x04) { result = -1; dev_dbg(&piix4_adapter.dev, "Error: no response!\n"); } if (inb_p(SMBHSTSTS) != 0x00) outb_p(inb(SMBHSTSTS), SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { dev_err(&piix4_adapter.dev, "Failed reset at end of " "transaction (%02x)\n", temp); } dev_dbg(&piix4_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); return result; } /* Return -1 on error. */ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { int i, len; switch (size) { case I2C_SMBUS_PROC_CALL: dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); return -1; case I2C_SMBUS_QUICK: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); size = PIIX4_QUICK; break; case I2C_SMBUS_BYTE: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); if (read_write == I2C_SMBUS_WRITE) outb_p(command, SMBHSTCMD); size = PIIX4_BYTE; break; case I2C_SMBUS_BYTE_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) outb_p(data->byte, SMBHSTDAT0); size = PIIX4_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { outb_p(data->word & 0xff, SMBHSTDAT0); outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); } size = PIIX4_WORD_DATA; break; case I2C_SMBUS_BLOCK_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { len = data->block[0]; if (len < 0) len = 0; if (len > 32) len = 32; outb_p(len, SMBHSTDAT0); i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= len; i++) outb_p(data->block[i], SMBBLKDAT); } size = PIIX4_BLOCK_DATA; break; } outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); if (piix4_transaction()) /* Error in transaction */ return -1; if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK)) return 0; switch (size) { case PIIX4_BYTE: /* Where is the result put? I assume here it is in SMBHSTDAT0 but it might just as well be in the SMBHSTCMD. No clue in the docs */ data->byte = inb_p(SMBHSTDAT0); break; case PIIX4_BYTE_DATA: data->byte = inb_p(SMBHSTDAT0); break; case PIIX4_WORD_DATA: data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); break; case PIIX4_BLOCK_DATA: data->block[0] = inb_p(SMBHSTDAT0); i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= data->block[0]; i++) data->block[i] = inb_p(SMBBLKDAT); break; } return 0; } static u32 piix4_func(struct i2c_adapter *adapter) { return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA; } static struct i2c_algorithm smbus_algorithm = { .smbus_xfer = piix4_access, .functionality = piix4_func, }; static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; static struct pci_device_id piix4_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3), .driver_data = 3 }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS), .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS), .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS), .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4), .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5), .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6), .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB), .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3), .driver_data = 3 }, { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3), .driver_data = 0 }, { 0, } }; MODULE_DEVICE_TABLE (pci, piix4_ids); static int __devinit piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) { int retval; retval = piix4_setup(dev, id); if (retval) return retval; /* set up the driverfs linkage to our parent device */ piix4_adapter.dev.parent = &dev->dev; snprintf(piix4_adapter.name, I2C_NAME_SIZE, "SMBus PIIX4 adapter at %04x", piix4_smba); if ((retval = i2c_add_adapter(&piix4_adapter))) { dev_err(&dev->dev, "Couldn't register adapter!\n"); release_region(piix4_smba, SMBIOSIZE); piix4_smba = 0; } return retval; } static void __devexit piix4_remove(struct pci_dev *dev) { if (piix4_smba) { i2c_del_adapter(&piix4_adapter); release_region(piix4_smba, SMBIOSIZE); piix4_smba = 0; } } static struct pci_driver piix4_driver = { .name = "piix4_smbus", .id_table = piix4_ids, .probe = piix4_probe, .remove = __devexit_p(piix4_remove), }; static int __init i2c_piix4_init(void) { return pci_register_driver(&piix4_driver); } static void __exit i2c_piix4_exit(void) { pci_unregister_driver(&piix4_driver); } MODULE_AUTHOR("Frodo Looijaard and " "Philip Edelbrock "); MODULE_DESCRIPTION("PIIX4 SMBus driver"); MODULE_LICENSE("GPL"); module_init(i2c_piix4_init); module_exit(i2c_piix4_exit);