# SPDX-License-Identifier: GPL-2.0-only config DRM_PANEL bool depends on DRM help Panel registration and lookup framework. menu "Display Panels" depends on DRM && DRM_PANEL config DRM_PANEL_ARM_VERSATILE tristate "ARM Versatile panel driver" depends on OF depends on MFD_SYSCON select VIDEOMODE_HELPERS help This driver supports the ARM Versatile panels connected to ARM reference designs. The panel is detected using special registers in the Versatile family syscon registers. config DRM_PANEL_LVDS tristate "Generic LVDS panel driver" depends on OF depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS help This driver supports LVDS panels that don't require device-specific handling of power supplies or control signals. It implements automatic backlight handling if the panel is attached to a backlight controller. config DRM_PANEL_SIMPLE tristate "support for simple panels" depends on OF depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS help DRM panel driver for dumb panels that need at most a regulator and a GPIO to be powered up. Optionally a backlight can be attached so that it can be automatically turned off when the panel goes into a low power state. config DRM_PANEL_FEIYANG_FY07024DI26A30D tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y if you want to enable support for panels based on the Feiyang FY07024DI26A30-D MIPI-DSI interface. config DRM_PANEL_ILITEK_IL9322 tristate "Ilitek ILI9322 320x240 QVGA panels" depends on OF && SPI select REGMAP help Say Y here if you want to enable support for Ilitek IL9322 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. config DRM_PANEL_ILITEK_ILI9881C tristate "Ilitek ILI9881C-based panels" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y if you want to enable support for panels based on the Ilitek ILI9881c controller. config DRM_PANEL_INNOLUX_P079ZCA tristate "Innolux P079ZCA panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Innolux P079ZCA TFT-LCD modules. The panel has a 1024x768 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. config DRM_PANEL_JDI_LT070ME05000 tristate "JDI LT070ME05000 WUXGA DSI panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for JDI DSI video mode panel as found in Google Nexus 7 (2013) devices. The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 24 bit per pixel. config DRM_PANEL_KINGDISPLAY_KD097D04 tristate "Kingdisplay kd097d04 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Kingdisplay kd097d04 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. config DRM_PANEL_SAMSUNG_LD9040 tristate "Samsung LD9040 RGB/SPI panel" depends on OF && SPI select VIDEOMODE_HELPERS config DRM_PANEL_LG_LG4573 tristate "LG4573 RGB/SPI panel" depends on OF && SPI select VIDEOMODE_HELPERS help Say Y here if you want to enable support for LG4573 RGB panel. To compile this driver as a module, choose M here. config DRM_PANEL_NOVATEK_NT39016 tristate "Novatek NT39016 RGB/SPI panel" depends on OF && SPI depends on BACKLIGHT_CLASS_DEVICE select REGMAP_SPI help Say Y here if you want to enable support for the panels built around the Novatek NT39016 display controller. config DRM_PANEL_OLIMEX_LCD_OLINUXINO tristate "Olimex LCD-OLinuXino panel" depends on OF depends on I2C depends on BACKLIGHT_CLASS_DEVICE help The panel is used with different sizes LCDs, from 480x272 to 1280x800, and 24 bit per pixel. Say Y here if you want to enable support for Olimex Ltd. LCD-OLinuXino panel. config DRM_PANEL_ORISETECH_OTM8009A tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Orise Technology otm8009a 480x800 dsi 2dl panel. config DRM_PANEL_OSD_OSD101T2587_53TS tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 dsi panel. config DRM_PANEL_PANASONIC_VVX10F034N00 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Panasonic VVX10F034N00 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some Xperia Z2 tablets config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN tristate "Raspberry Pi 7-inch touchscreen panel" depends on DRM_MIPI_DSI help Say Y here if you want to enable support for the Raspberry Pi 7" Touchscreen. To compile this driver as a module, choose M here. config DRM_PANEL_RAYDIUM_RM67191 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Raydium RM67191 FHD (1080x1920) DSI panel. config DRM_PANEL_RAYDIUM_RM68200 tristate "Raydium RM68200 720x1280 DSI video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Raydium RM68200 720x1280 DSI video mode panel. config DRM_PANEL_ROCKTECH_JH057N00900 tristate "Rocktech JH057N00900 MIPI touchscreen panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Rocktech JH057N00900 MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built in backlight and touch controller. Touch input support is provided by the goodix driver and needs to be selected separately. config DRM_PANEL_RONBO_RB070D30 tristate "Ronbo Electronics RB070D30 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Ronbo Electronics RB070D30 1024x600 DSI panel. config DRM_PANEL_SAMSUNG_S6D16D0 tristate "Samsung S6D16D0 DSI video mode panel" depends on OF depends on DRM_MIPI_DSI select VIDEOMODE_HELPERS config DRM_PANEL_SAMSUNG_S6E3HA2 tristate "Samsung S6E3HA2 DSI video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS config DRM_PANEL_SAMSUNG_S6E63J0X03 tristate "Samsung S6E63J0X03 DSI command mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS config DRM_PANEL_SAMSUNG_S6E63M0 tristate "Samsung S6E63M0 RGB/SPI panel" depends on OF depends on SPI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Samsung S6E63M0 AMOLED LCD panel. config DRM_PANEL_SAMSUNG_S6E8AA0 tristate "Samsung S6E8AA0 DSI video mode panel" depends on OF select DRM_MIPI_DSI select VIDEOMODE_HELPERS config DRM_PANEL_SEIKO_43WVF1G tristate "Seiko 43WVF1G panel" depends on OF depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS help Say Y here if you want to enable support for the Seiko 43WVF1G controller for 800x480 LCD panels config DRM_PANEL_SHARP_LQ101R1SX01 tristate "Sharp LQ101R1SX01 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Sharp LQ101R1SX01 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 24 bit RGB per pixel. It provides a dual MIPI DSI interface to the host and has a built-in LED backlight. To compile this driver as a module, choose M here: the module will be called panel-sharp-lq101r1sx01. config DRM_PANEL_SHARP_LS043T1LE01 tristate "Sharp LS043T1LE01 qHD video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Sharp LS043T1LE01 qHD (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard config DRM_PANEL_SITRONIX_ST7701 tristate "Sitronix ST7701 panel driver" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the Sitronix ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI system interfaces. config DRM_PANEL_SITRONIX_ST7789V tristate "Sitronix ST7789V panel" depends on OF && SPI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the Sitronix ST7789V controller for 240x320 LCD panels config DRM_PANEL_TPO_TPG110 tristate "TPO TPG 800x400 panel" depends on OF && SPI && GPIOLIB depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for TPO TPG110 400CH LTPS TFT LCD Single Chip Digital Driver for up to 800x400 LCD panels. config DRM_PANEL_TRULY_NT35597_WQXGA tristate "Truly WQXGA" depends on OF depends on DRM_MIPI_DSI help Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI Video Mode panel endmenu