# SPDX-License-Identifier: GPL-2.0-only config DRM_PANEL bool depends on DRM help Panel registration and lookup framework. menu "Display Panels" depends on DRM && DRM_PANEL config DRM_PANEL_ABT_Y030XX067A tristate "ABT Y030XX067A 320x480 LCD panel" depends on OF && SPI select REGMAP_SPI help Say Y here to enable support for the Asia Better Technology Ltd. Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 and RG-99 handheld gaming consoles. config DRM_PANEL_ARM_VERSATILE tristate "ARM Versatile panel driver" depends on OF depends on MFD_SYSCON select VIDEOMODE_HELPERS help This driver supports the ARM Versatile panels connected to ARM reference designs. The panel is detected using special registers in the Versatile family syscon registers. config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 tristate "ASUS Z00T TM5P5 NT35596 panel" depends on GPIOLIB && OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the ASUS TMP5P5 NT35596 1080x1920 video mode panel as found in some Asus Zenfone 2 Laser Z00T devices. config DRM_PANEL_BOE_HIMAX8279D tristate "Boe Himax8279d panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Boe Himax8279d TFT-LCD modules. The panel has a 1200x1920 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. config DRM_PANEL_BOE_TV101WUM_NL6 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 45NA WUXGA PANEL DSI Video Mode panel config DRM_PANEL_DSI_CM tristate "Generic DSI command mode panels" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help DRM panel driver for DSI command mode panels with support for embedded and external backlights. config DRM_PANEL_LVDS tristate "Generic LVDS panel driver" depends on OF depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS help This driver supports LVDS panels that don't require device-specific handling of power supplies or control signals. It implements automatic backlight handling if the panel is attached to a backlight controller. config DRM_PANEL_SIMPLE tristate "support for simple panels" depends on OF depends on BACKLIGHT_CLASS_DEVICE depends on PM select VIDEOMODE_HELPERS select DRM_DP_AUX_BUS help DRM panel driver for dumb panels that need at most a regulator and a GPIO to be powered up. Optionally a backlight can be attached so that it can be automatically turned off when the panel goes into a low power state. config DRM_PANEL_ELIDA_KD35T133 tristate "Elida KD35T133 panel driver" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the Elida KD35T133 controller for 320x480 LCD panels with MIPI-DSI system interfaces. config DRM_PANEL_FEIXIN_K101_IM2BA02 tristate "Feixin K101 IM2BA02 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the Feixin K101 IM2BA02 4-lane 800x1280 MIPI DSI panel. config DRM_PANEL_FEIYANG_FY07024DI26A30D tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y if you want to enable support for panels based on the Feiyang FY07024DI26A30-D MIPI-DSI interface. config DRM_PANEL_ILITEK_IL9322 tristate "Ilitek ILI9322 320x240 QVGA panels" depends on OF && SPI select REGMAP help Say Y here if you want to enable support for Ilitek IL9322 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. config DRM_PANEL_ILITEK_ILI9341 tristate "Ilitek ILI9341 240x320 QVGA panels" depends on OF && SPI depends on DRM_KMS_HELPER depends on DRM_KMS_CMA_HELPER depends on BACKLIGHT_CLASS_DEVICE select DRM_MIPI_DBI help Say Y here if you want to enable support for Ilitek IL9341 QVGA (240x320) RGB panels. support serial & parallel rgb interface. config DRM_PANEL_ILITEK_ILI9881C tristate "Ilitek ILI9881C-based panels" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y if you want to enable support for panels based on the Ilitek ILI9881c controller. config DRM_PANEL_INNOLUX_EJ030NA tristate "Innolux EJ030NA 320x480 LCD panel" depends on OF && SPI select REGMAP_SPI help Say Y here to enable support for the Innolux/Chimei EJ030NA 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) and LDK handheld gaming consoles. config DRM_PANEL_INNOLUX_P079ZCA tristate "Innolux P079ZCA panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Innolux P079ZCA TFT-LCD modules. The panel has a 1024x768 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. config DRM_PANEL_JDI_LT070ME05000 tristate "JDI LT070ME05000 WUXGA DSI panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for JDI DSI video mode panel as found in Google Nexus 7 (2013) devices. The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 24 bit per pixel. config DRM_PANEL_KHADAS_TS050 tristate "Khadas TS050 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Khadas TS050 TFT-LCD panel module. The panel has a 1080x1920 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. config DRM_PANEL_KINGDISPLAY_KD097D04 tristate "Kingdisplay kd097d04 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Kingdisplay kd097d04 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. config DRM_PANEL_LEADTEK_LTK050H3146W tristate "Leadtek LTK050H3146W panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Leadtek LTK050H3146W TFT-LCD modules. The panel has a 720x1280 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. config DRM_PANEL_LEADTEK_LTK500HD1829 tristate "Leadtek LTK500HD1829 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Kingdisplay kd097d04 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. config DRM_PANEL_SAMSUNG_LD9040 tristate "Samsung LD9040 RGB/SPI panel" depends on OF && SPI select VIDEOMODE_HELPERS config DRM_PANEL_LG_LB035Q02 tristate "LG LB035Q024573 RGB panel" depends on GPIOLIB && OF && SPI help Say Y here if you want to enable support for the LB035Q02 RGB panel (found on the Gumstix Overo Palo35 board). To compile this driver as a module, choose M here. config DRM_PANEL_LG_LG4573 tristate "LG4573 RGB/SPI panel" depends on OF && SPI select VIDEOMODE_HELPERS help Say Y here if you want to enable support for LG4573 RGB panel. To compile this driver as a module, choose M here. config DRM_PANEL_NEC_NL8048HL11 tristate "NEC NL8048HL11 RGB panel" depends on GPIOLIB && OF && SPI help Say Y here if you want to enable support for the NEC NL8048HL11 RGB panel (found on the Zoom2/3/3630 SDP boards). To compile this driver as a module, choose M here. config DRM_PANEL_NOVATEK_NT35510 tristate "Novatek NT35510 RGB panel driver" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the panels built around the Novatek NT35510 display controller, such as some Hydis panels. config DRM_PANEL_NOVATEK_NT36672A tristate "Novatek NT36672A DSI panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the panels built around the Novatek NT36672A display controller, such as some Tianma panels used in a few Xiaomi Poco F1 mobile phones. config DRM_PANEL_NOVATEK_NT39016 tristate "Novatek NT39016 RGB/SPI panel" depends on OF && SPI depends on BACKLIGHT_CLASS_DEVICE select REGMAP_SPI help Say Y here if you want to enable support for the panels built around the Novatek NT39016 display controller. config DRM_PANEL_MANTIX_MLAF057WE51 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the Mantix MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It has a resolution of 720x1440 pixels, a built in backlight and touch controller. config DRM_PANEL_OLIMEX_LCD_OLINUXINO tristate "Olimex LCD-OLinuXino panel" depends on OF depends on I2C depends on BACKLIGHT_CLASS_DEVICE help The panel is used with different sizes LCDs, from 480x272 to 1280x800, and 24 bit per pixel. Say Y here if you want to enable support for Olimex Ltd. LCD-OLinuXino panel. config DRM_PANEL_ORISETECH_OTM8009A tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Orise Technology otm8009a 480x800 dsi 2dl panel. config DRM_PANEL_OSD_OSD101T2587_53TS tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 dsi panel. config DRM_PANEL_PANASONIC_VVX10F034N00 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Panasonic VVX10F034N00 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some Xperia Z2 tablets config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN tristate "Raspberry Pi 7-inch touchscreen panel" depends on DRM_MIPI_DSI help Say Y here if you want to enable support for the Raspberry Pi 7" Touchscreen. To compile this driver as a module, choose M here. config DRM_PANEL_RAYDIUM_RM67191 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Raydium RM67191 FHD (1080x1920) DSI panel. config DRM_PANEL_RAYDIUM_RM68200 tristate "Raydium RM68200 720x1280 DSI video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Raydium RM68200 720x1280 DSI video mode panel. config DRM_PANEL_RONBO_RB070D30 tristate "Ronbo Electronics RB070D30 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Ronbo Electronics RB070D30 1024x600 DSI panel. config DRM_PANEL_SAMSUNG_ATNA33XC20 tristate "Samsung ATNA33XC20 eDP panel" depends on OF depends on BACKLIGHT_CLASS_DEVICE depends on PM select DRM_DP_AUX_BUS help DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't be handled by the DRM_PANEL_SIMPLE driver because its power sequencing is non-standard. config DRM_PANEL_SAMSUNG_DB7430 tristate "Samsung DB7430-based DPI panels" depends on OF && SPI && GPIOLIB depends on BACKLIGHT_CLASS_DEVICE select DRM_MIPI_DBI help Say Y here if you want to enable support for the Samsung DB7430 DPI display controller used in such devices as the LMS397KF04 480x800 DPI panel. config DRM_PANEL_SAMSUNG_S6D16D0 tristate "Samsung S6D16D0 DSI video mode panel" depends on OF depends on DRM_MIPI_DSI select VIDEOMODE_HELPERS config DRM_PANEL_SAMSUNG_S6D27A1 tristate "Samsung S6D27A1 DPI panel driver" depends on OF && SPI && GPIOLIB select DRM_MIPI_DBI help Say Y here if you want to enable support for the Samsung S6D27A1 DPI 480x800 panel. This panel can be found in Samsung Galaxy Ace 2 GT-I8160 mobile phone. config DRM_PANEL_SAMSUNG_S6E3HA2 tristate "Samsung S6E3HA2 DSI video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS config DRM_PANEL_SAMSUNG_S6E63J0X03 tristate "Samsung S6E63J0X03 DSI command mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS config DRM_PANEL_SAMSUNG_S6E63M0 tristate "Samsung S6E63M0 RGB panel" depends on OF depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Samsung S6E63M0 AMOLED LCD panel. This panel can be accessed using SPI or DSI. config DRM_PANEL_SAMSUNG_S6E63M0_SPI tristate "Samsung S6E63M0 RGB SPI interface" depends on SPI depends on DRM_PANEL_SAMSUNG_S6E63M0 default DRM_PANEL_SAMSUNG_S6E63M0 select DRM_MIPI_DBI help Say Y here if you want to be able to access the Samsung S6E63M0 panel using SPI. config DRM_PANEL_SAMSUNG_S6E63M0_DSI tristate "Samsung S6E63M0 RGB DSI interface" depends on DRM_MIPI_DSI depends on DRM_PANEL_SAMSUNG_S6E63M0 help Say Y here if you want to be able to access the Samsung S6E63M0 panel using DSI. config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" depends on OF select DRM_MIPI_DSI select VIDEOMODE_HELPERS config DRM_PANEL_SAMSUNG_S6E8AA0 tristate "Samsung S6E8AA0 DSI video mode panel" depends on OF select DRM_MIPI_DSI select VIDEOMODE_HELPERS config DRM_PANEL_SAMSUNG_SOFEF00 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS help Say Y or M here if you want to enable support for the Samsung AMOLED command mode panels found in the OnePlus 6/6T smartphones. The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively config DRM_PANEL_SEIKO_43WVF1G tristate "Seiko 43WVF1G panel" depends on OF depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS help Say Y here if you want to enable support for the Seiko 43WVF1G controller for 800x480 LCD panels config DRM_PANEL_SHARP_LQ101R1SX01 tristate "Sharp LQ101R1SX01 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Sharp LQ101R1SX01 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 24 bit RGB per pixel. It provides a dual MIPI DSI interface to the host and has a built-in LED backlight. To compile this driver as a module, choose M here: the module will be called panel-sharp-lq101r1sx01. config DRM_PANEL_SHARP_LS037V7DW01 tristate "Sharp LS037V7DW01 VGA LCD panel" depends on GPIOLIB && OF && REGULATOR help Say Y here if you want to enable support for Sharp LS037V7DW01 VGA (480x640) LCD panel (found on the TI SDP3430 board). config DRM_PANEL_SHARP_LS043T1LE01 tristate "Sharp LS043T1LE01 qHD video mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Sharp LS043T1LE01 qHD (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard config DRM_PANEL_SITRONIX_ST7701 tristate "Sitronix ST7701 panel driver" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the Sitronix ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI system interfaces. config DRM_PANEL_SITRONIX_ST7703 tristate "Sitronix ST7703 based MIPI touchscreen panels" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Sitronix ST7703 based panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built in backlight and touch controller. Touch input support is provided by the goodix driver and needs to be selected separately. config DRM_PANEL_SITRONIX_ST7789V tristate "Sitronix ST7789V panel" depends on OF && SPI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the Sitronix ST7789V controller for 240x320 LCD panels config DRM_PANEL_SONY_ACX424AKP tristate "Sony ACX424AKP DSI command mode panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE select VIDEOMODE_HELPERS help Say Y here if you want to enable the Sony ACX424 display panel. This panel supports DSI in both command and video mode. config DRM_PANEL_SONY_ACX565AKM tristate "Sony ACX565AKM panel" depends on GPIOLIB && OF && SPI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the Sony ACX565AKM 800x600 3.5" panel (found on the Nokia N900). config DRM_PANEL_TDO_TL070WSH30 tristate "TDO TL070WSH30 DSI panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD panel module. The panel has a 1024×600 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. config DRM_PANEL_TPO_TD028TTEC1 tristate "Toppoly (TPO) TD028TTEC1 panel driver" depends on OF && SPI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for TPO TD028TTEC1 480x640 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). config DRM_PANEL_TPO_TD043MTEA1 tristate "Toppoly (TPO) TD043MTEA1 panel driver" depends on GPIOLIB && OF && REGULATOR && SPI help Say Y here if you want to enable support for TPO TD043MTEA1 800x480 4.3" panel (found on the OMAP3 Pandora board). config DRM_PANEL_TPO_TPG110 tristate "TPO TPG 800x400 panel" depends on OF && SPI && GPIOLIB depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for TPO TPG110 400CH LTPS TFT LCD Single Chip Digital Driver for up to 800x400 LCD panels. config DRM_PANEL_TRULY_NT35597_WQXGA tristate "Truly WQXGA" depends on OF depends on DRM_MIPI_DSI help Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI Video Mode panel config DRM_PANEL_VISIONOX_RM69299 tristate "Visionox RM69299" depends on OF depends on DRM_MIPI_DSI help Say Y here if you want to enable support for Visionox RM69299 DSI Video Mode panel. config DRM_PANEL_WIDECHIPS_WS2401 tristate "Widechips WS2401 DPI panel driver" depends on SPI && GPIOLIB depends on BACKLIGHT_CLASS_DEVICE select DRM_MIPI_DBI help Say Y here if you want to enable support for the Widechips WS2401 DPI 480x800 display controller used in panels such as Samsung LMS380KF01. This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). config DRM_PANEL_XINPENG_XPP055C272 tristate "Xinpeng XPP055C272 panel driver" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for the Xinpeng XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI system interfaces. endmenu