/* * Copyright 2022 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Authors: AMD * */ /* FILE POLICY AND INTENDED USAGE: * This file manages link detection states and receiver states by using various * link protocols. It also provides helper functions to interpret certain * capabilities or status based on the states it manages or retrieve them * directly from connected receivers. */ #include "link_dpms.h" #include "link_detection.h" #include "link_hwss.h" #include "protocols/link_edp_panel_control.h" #include "protocols/link_ddc.h" #include "protocols/link_hpd.h" #include "protocols/link_dpcd.h" #include "protocols/link_dp_capability.h" #include "protocols/link_dp_dpia.h" #include "protocols/link_dp_phy.h" #include "protocols/link_dp_training.h" #include "accessories/link_dp_trace.h" #include "link_enc_cfg.h" #include "dm_helpers.h" #include "clk_mgr.h" #define DC_LOGGER_INIT(logger) #define LINK_INFO(...) \ DC_LOG_HW_HOTPLUG( \ __VA_ARGS__) /* * Some receivers fail to train on first try and are good * on subsequent tries. 2 retries should be plenty. If we * don't have a successful training then we don't expect to * ever get one. */ #define LINK_TRAINING_MAX_VERIFY_RETRY 2 static const u8 DP_SINK_BRANCH_DEV_NAME_7580[] = "7580\x80u"; static const uint8_t dp_hdmi_dongle_signature_str[] = "DP-HDMI ADAPTOR"; static enum ddc_transaction_type get_ddc_transaction_type(enum signal_type sink_signal) { enum ddc_transaction_type transaction_type = DDC_TRANSACTION_TYPE_NONE; switch (sink_signal) { case SIGNAL_TYPE_DVI_SINGLE_LINK: case SIGNAL_TYPE_DVI_DUAL_LINK: case SIGNAL_TYPE_HDMI_TYPE_A: case SIGNAL_TYPE_LVDS: case SIGNAL_TYPE_RGB: transaction_type = DDC_TRANSACTION_TYPE_I2C; break; case SIGNAL_TYPE_DISPLAY_PORT: case SIGNAL_TYPE_EDP: transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX; break; case SIGNAL_TYPE_DISPLAY_PORT_MST: /* MST does not use I2COverAux, but there is the * SPECIAL use case for "immediate dwnstrm device * access" (EPR#370830). */ transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX; break; default: break; } return transaction_type; } static enum signal_type get_basic_signal_type(struct graphics_object_id encoder, struct graphics_object_id downstream) { if (downstream.type == OBJECT_TYPE_CONNECTOR) { switch (downstream.id) { case CONNECTOR_ID_SINGLE_LINK_DVII: switch (encoder.id) { case ENCODER_ID_INTERNAL_DAC1: case ENCODER_ID_INTERNAL_KLDSCP_DAC1: case ENCODER_ID_INTERNAL_DAC2: case ENCODER_ID_INTERNAL_KLDSCP_DAC2: return SIGNAL_TYPE_RGB; default: return SIGNAL_TYPE_DVI_SINGLE_LINK; } break; case CONNECTOR_ID_DUAL_LINK_DVII: { switch (encoder.id) { case ENCODER_ID_INTERNAL_DAC1: case ENCODER_ID_INTERNAL_KLDSCP_DAC1: case ENCODER_ID_INTERNAL_DAC2: case ENCODER_ID_INTERNAL_KLDSCP_DAC2: return SIGNAL_TYPE_RGB; default: return SIGNAL_TYPE_DVI_DUAL_LINK; } } break; case CONNECTOR_ID_SINGLE_LINK_DVID: return SIGNAL_TYPE_DVI_SINGLE_LINK; case CONNECTOR_ID_DUAL_LINK_DVID: return SIGNAL_TYPE_DVI_DUAL_LINK; case CONNECTOR_ID_VGA: return SIGNAL_TYPE_RGB; case CONNECTOR_ID_HDMI_TYPE_A: return SIGNAL_TYPE_HDMI_TYPE_A; case CONNECTOR_ID_LVDS: return SIGNAL_TYPE_LVDS; case CONNECTOR_ID_DISPLAY_PORT: case CONNECTOR_ID_USBC: return SIGNAL_TYPE_DISPLAY_PORT; case CONNECTOR_ID_EDP: return SIGNAL_TYPE_EDP; default: return SIGNAL_TYPE_NONE; } } else if (downstream.type == OBJECT_TYPE_ENCODER) { switch (downstream.id) { case ENCODER_ID_EXTERNAL_NUTMEG: case ENCODER_ID_EXTERNAL_TRAVIS: return SIGNAL_TYPE_DISPLAY_PORT; default: return SIGNAL_TYPE_NONE; } } return SIGNAL_TYPE_NONE; } /* * @brief * Detect output sink type */ static enum signal_type link_detect_sink_signal_type(struct dc_link *link, enum dc_detect_reason reason) { enum signal_type result; struct graphics_object_id enc_id; if (link->is_dig_mapping_flexible) enc_id = (struct graphics_object_id){.id = ENCODER_ID_UNKNOWN}; else enc_id = link->link_enc->id; result = get_basic_signal_type(enc_id, link->link_id); /* Use basic signal type for link without physical connector. */ if (link->ep_type != DISPLAY_ENDPOINT_PHY) return result; /* Internal digital encoder will detect only dongles * that require digital signal */ /* Detection mechanism is different * for different native connectors. * LVDS connector supports only LVDS signal; * PCIE is a bus slot, the actual connector needs to be detected first; * eDP connector supports only eDP signal; * HDMI should check straps for audio */ /* PCIE detects the actual connector on add-on board */ if (link->link_id.id == CONNECTOR_ID_PCIE) { /* ZAZTODO implement PCIE add-on card detection */ } switch (link->link_id.id) { case CONNECTOR_ID_HDMI_TYPE_A: { /* check audio support: * if native HDMI is not supported, switch to DVI */ struct audio_support *aud_support = &link->dc->res_pool->audio_support; if (!aud_support->hdmi_audio_native) if (link->link_id.id == CONNECTOR_ID_HDMI_TYPE_A) result = SIGNAL_TYPE_DVI_SINGLE_LINK; } break; case CONNECTOR_ID_DISPLAY_PORT: case CONNECTOR_ID_USBC: { /* DP HPD short pulse. Passive DP dongle will not * have short pulse */ if (reason != DETECT_REASON_HPDRX) { /* Check whether DP signal detected: if not - * we assume signal is DVI; it could be corrected * to HDMI after dongle detection */ if (!dm_helpers_is_dp_sink_present(link)) result = SIGNAL_TYPE_DVI_SINGLE_LINK; } } break; default: break; } return result; } static enum signal_type decide_signal_from_strap_and_dongle_type(enum display_dongle_type dongle_type, struct audio_support *audio_support) { enum signal_type signal = SIGNAL_TYPE_NONE; switch (dongle_type) { case DISPLAY_DONGLE_DP_HDMI_DONGLE: if (audio_support->hdmi_audio_on_dongle) signal = SIGNAL_TYPE_HDMI_TYPE_A; else signal = SIGNAL_TYPE_DVI_SINGLE_LINK; break; case DISPLAY_DONGLE_DP_DVI_DONGLE: signal = SIGNAL_TYPE_DVI_SINGLE_LINK; break; case DISPLAY_DONGLE_DP_HDMI_MISMATCHED_DONGLE: if (audio_support->hdmi_audio_native) signal = SIGNAL_TYPE_HDMI_TYPE_A; else signal = SIGNAL_TYPE_DVI_SINGLE_LINK; break; default: signal = SIGNAL_TYPE_NONE; break; } return signal; } static void read_scdc_caps(struct ddc_service *ddc_service, struct dc_sink *sink) { uint8_t slave_address = HDMI_SCDC_ADDRESS; uint8_t offset = HDMI_SCDC_MANUFACTURER_OUI; link_query_ddc_data(ddc_service, slave_address, &offset, sizeof(offset), sink->scdc_caps.manufacturer_OUI.byte, sizeof(sink->scdc_caps.manufacturer_OUI.byte)); offset = HDMI_SCDC_DEVICE_ID; link_query_ddc_data(ddc_service, slave_address, &offset, sizeof(offset), &(sink->scdc_caps.device_id.byte), sizeof(sink->scdc_caps.device_id.byte)); } static bool i2c_read( struct ddc_service *ddc, uint32_t address, uint8_t *buffer, uint32_t len) { uint8_t offs_data = 0; struct i2c_payload payloads[2] = { { .write = true, .address = address, .length = 1, .data = &offs_data }, { .write = false, .address = address, .length = len, .data = buffer } }; struct i2c_command command = { .payloads = payloads, .number_of_payloads = 2, .engine = DDC_I2C_COMMAND_ENGINE, .speed = ddc->ctx->dc->caps.i2c_speed_in_khz }; return dm_helpers_submit_i2c( ddc->ctx, ddc->link, &command); } enum { DP_SINK_CAP_SIZE = DP_EDP_CONFIGURATION_CAP - DP_DPCD_REV + 1 }; static void query_dp_dual_mode_adaptor( struct ddc_service *ddc, struct display_sink_capability *sink_cap) { uint8_t i; bool is_valid_hdmi_signature; enum display_dongle_type *dongle = &sink_cap->dongle_type; uint8_t type2_dongle_buf[DP_ADAPTOR_TYPE2_SIZE]; bool is_type2_dongle = false; int retry_count = 2; struct dp_hdmi_dongle_signature_data *dongle_signature; /* Assume we have no valid DP passive dongle connected */ *dongle = DISPLAY_DONGLE_NONE; sink_cap->max_hdmi_pixel_clock = DP_ADAPTOR_HDMI_SAFE_MAX_TMDS_CLK; /* Read DP-HDMI dongle I2c (no response interpreted as DP-DVI dongle)*/ if (!i2c_read( ddc, DP_HDMI_DONGLE_ADDRESS, type2_dongle_buf, sizeof(type2_dongle_buf))) { /* Passive HDMI dongles can sometimes fail here without retrying*/ while (retry_count > 0) { if (i2c_read(ddc, DP_HDMI_DONGLE_ADDRESS, type2_dongle_buf, sizeof(type2_dongle_buf))) break; retry_count--; } if (retry_count == 0) { *dongle = DISPLAY_DONGLE_DP_DVI_DONGLE; sink_cap->max_hdmi_pixel_clock = DP_ADAPTOR_DVI_MAX_TMDS_CLK; CONN_DATA_DETECT(ddc->link, type2_dongle_buf, sizeof(type2_dongle_buf), "DP-DVI passive dongle %dMhz: ", DP_ADAPTOR_DVI_MAX_TMDS_CLK / 1000); return; } } /* Check if Type 2 dongle.*/ if (type2_dongle_buf[DP_ADAPTOR_TYPE2_REG_ID] == DP_ADAPTOR_TYPE2_ID) is_type2_dongle = true; dongle_signature = (struct dp_hdmi_dongle_signature_data *)type2_dongle_buf; is_valid_hdmi_signature = true; /* Check EOT */ if (dongle_signature->eot != DP_HDMI_DONGLE_SIGNATURE_EOT) { is_valid_hdmi_signature = false; } /* Check signature */ for (i = 0; i < sizeof(dongle_signature->id); ++i) { /* If its not the right signature, * skip mismatch in subversion byte.*/ if (dongle_signature->id[i] != dp_hdmi_dongle_signature_str[i] && i != 3) { if (is_type2_dongle) { is_valid_hdmi_signature = false; break; } } } if (is_type2_dongle) { uint32_t max_tmds_clk = type2_dongle_buf[DP_ADAPTOR_TYPE2_REG_MAX_TMDS_CLK]; max_tmds_clk = max_tmds_clk * 2 + max_tmds_clk / 2; if (0 == max_tmds_clk || max_tmds_clk < DP_ADAPTOR_TYPE2_MIN_TMDS_CLK || max_tmds_clk > DP_ADAPTOR_TYPE2_MAX_TMDS_CLK) { *dongle = DISPLAY_DONGLE_DP_DVI_DONGLE; CONN_DATA_DETECT(ddc->link, type2_dongle_buf, sizeof(type2_dongle_buf), "DP-DVI passive dongle %dMhz: ", DP_ADAPTOR_DVI_MAX_TMDS_CLK / 1000); } else { if (is_valid_hdmi_signature == true) { *dongle = DISPLAY_DONGLE_DP_HDMI_DONGLE; CONN_DATA_DETECT(ddc->link, type2_dongle_buf, sizeof(type2_dongle_buf), "Type 2 DP-HDMI passive dongle %dMhz: ", max_tmds_clk); } else { *dongle = DISPLAY_DONGLE_DP_HDMI_MISMATCHED_DONGLE; CONN_DATA_DETECT(ddc->link, type2_dongle_buf, sizeof(type2_dongle_buf), "Type 2 DP-HDMI passive dongle (no signature) %dMhz: ", max_tmds_clk); } /* Multiply by 1000 to convert to kHz. */ sink_cap->max_hdmi_pixel_clock = max_tmds_clk * 1000; } sink_cap->is_dongle_type_one = false; } else { if (is_valid_hdmi_signature == true) { *dongle = DISPLAY_DONGLE_DP_HDMI_DONGLE; CONN_DATA_DETECT(ddc->link, type2_dongle_buf, sizeof(type2_dongle_buf), "Type 1 DP-HDMI passive dongle %dMhz: ", sink_cap->max_hdmi_pixel_clock / 1000); } else { *dongle = DISPLAY_DONGLE_DP_HDMI_MISMATCHED_DONGLE; CONN_DATA_DETECT(ddc->link, type2_dongle_buf, sizeof(type2_dongle_buf), "Type 1 DP-HDMI passive dongle (no signature) %dMhz: ", sink_cap->max_hdmi_pixel_clock / 1000); } sink_cap->is_dongle_type_one = true; } return; } static enum signal_type dp_passive_dongle_detection(struct ddc_service *ddc, struct display_sink_capability *sink_cap, struct audio_support *audio_support) { query_dp_dual_mode_adaptor(ddc, sink_cap); return decide_signal_from_strap_and_dongle_type(sink_cap->dongle_type, audio_support); } static void link_disconnect_sink(struct dc_link *link) { if (link->local_sink) { dc_sink_release(link->local_sink); link->local_sink = NULL; } link->dpcd_sink_count = 0; //link->dpcd_caps.dpcd_rev.raw = 0; } static void link_disconnect_remap(struct dc_sink *prev_sink, struct dc_link *link) { dc_sink_release(link->local_sink); link->local_sink = prev_sink; } static void query_hdcp_capability(enum signal_type signal, struct dc_link *link) { struct hdcp_protection_message msg22; struct hdcp_protection_message msg14; memset(&msg22, 0, sizeof(struct hdcp_protection_message)); memset(&msg14, 0, sizeof(struct hdcp_protection_message)); memset(link->hdcp_caps.rx_caps.raw, 0, sizeof(link->hdcp_caps.rx_caps.raw)); if ((link->connector_signal == SIGNAL_TYPE_DISPLAY_PORT && link->ddc->transaction_type == DDC_TRANSACTION_TYPE_I2C_OVER_AUX) || link->connector_signal == SIGNAL_TYPE_EDP) { msg22.data = link->hdcp_caps.rx_caps.raw; msg22.length = sizeof(link->hdcp_caps.rx_caps.raw); msg22.msg_id = HDCP_MESSAGE_ID_RX_CAPS; } else { msg22.data = &link->hdcp_caps.rx_caps.fields.version; msg22.length = sizeof(link->hdcp_caps.rx_caps.fields.version); msg22.msg_id = HDCP_MESSAGE_ID_HDCP2VERSION; } msg22.version = HDCP_VERSION_22; msg22.link = HDCP_LINK_PRIMARY; msg22.max_retries = 5; dc_process_hdcp_msg(signal, link, &msg22); if (signal == SIGNAL_TYPE_DISPLAY_PORT || signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { msg14.data = &link->hdcp_caps.bcaps.raw; msg14.length = sizeof(link->hdcp_caps.bcaps.raw); msg14.msg_id = HDCP_MESSAGE_ID_READ_BCAPS; msg14.version = HDCP_VERSION_14; msg14.link = HDCP_LINK_PRIMARY; msg14.max_retries = 5; dc_process_hdcp_msg(signal, link, &msg14); } } static void read_current_link_settings_on_detect(struct dc_link *link) { union lane_count_set lane_count_set = {0}; uint8_t link_bw_set; uint8_t link_rate_set; uint32_t read_dpcd_retry_cnt = 10; enum dc_status status = DC_ERROR_UNEXPECTED; int i; union max_down_spread max_down_spread = {0}; // Read DPCD 00101h to find out the number of lanes currently set for (i = 0; i < read_dpcd_retry_cnt; i++) { status = core_link_read_dpcd(link, DP_LANE_COUNT_SET, &lane_count_set.raw, sizeof(lane_count_set)); /* First DPCD read after VDD ON can fail if the particular board * does not have HPD pin wired correctly. So if DPCD read fails, * which it should never happen, retry a few times. Target worst * case scenario of 80 ms. */ if (status == DC_OK) { link->cur_link_settings.lane_count = lane_count_set.bits.LANE_COUNT_SET; break; } msleep(8); } // Read DPCD 00100h to find if standard link rates are set core_link_read_dpcd(link, DP_LINK_BW_SET, &link_bw_set, sizeof(link_bw_set)); if (link_bw_set == 0) { if (link->connector_signal == SIGNAL_TYPE_EDP) { /* If standard link rates are not being used, * Read DPCD 00115h to find the edp link rate set used */ core_link_read_dpcd(link, DP_LINK_RATE_SET, &link_rate_set, sizeof(link_rate_set)); // edp_supported_link_rates_count = 0 for DP if (link_rate_set < link->dpcd_caps.edp_supported_link_rates_count) { link->cur_link_settings.link_rate = link->dpcd_caps.edp_supported_link_rates[link_rate_set]; link->cur_link_settings.link_rate_set = link_rate_set; link->cur_link_settings.use_link_rate_set = true; } } else { // Link Rate not found. Seamless boot may not work. ASSERT(false); } } else { link->cur_link_settings.link_rate = link_bw_set; link->cur_link_settings.use_link_rate_set = false; } // Read DPCD 00003h to find the max down spread. core_link_read_dpcd(link, DP_MAX_DOWNSPREAD, &max_down_spread.raw, sizeof(max_down_spread)); link->cur_link_settings.link_spread = max_down_spread.bits.MAX_DOWN_SPREAD ? LINK_SPREAD_05_DOWNSPREAD_30KHZ : LINK_SPREAD_DISABLED; } static bool detect_dp(struct dc_link *link, struct display_sink_capability *sink_caps, enum dc_detect_reason reason) { struct audio_support *audio_support = &link->dc->res_pool->audio_support; sink_caps->signal = link_detect_sink_signal_type(link, reason); sink_caps->transaction_type = get_ddc_transaction_type(sink_caps->signal); if (sink_caps->transaction_type == DDC_TRANSACTION_TYPE_I2C_OVER_AUX) { sink_caps->signal = SIGNAL_TYPE_DISPLAY_PORT; if (!detect_dp_sink_caps(link)) return false; if (is_dp_branch_device(link)) /* DP SST branch */ link->type = dc_connection_sst_branch; } else { if (link->dc->debug.disable_dp_plus_plus_wa && link->link_enc->features.flags.bits.IS_UHBR20_CAPABLE) return false; /* DP passive dongles */ sink_caps->signal = dp_passive_dongle_detection(link->ddc, sink_caps, audio_support); link->dpcd_caps.dongle_type = sink_caps->dongle_type; link->dpcd_caps.is_dongle_type_one = sink_caps->is_dongle_type_one; link->dpcd_caps.dpcd_rev.raw = 0; } return true; } static bool is_same_edid(struct dc_edid *old_edid, struct dc_edid *new_edid) { if (old_edid->length != new_edid->length) return false; if (new_edid->length == 0) return false; return (memcmp(old_edid->raw_edid, new_edid->raw_edid, new_edid->length) == 0); } static bool wait_for_entering_dp_alt_mode(struct dc_link *link) { /** * something is terribly wrong if time out is > 200ms. (5Hz) * 500 microseconds * 400 tries us 200 ms **/ unsigned int sleep_time_in_microseconds = 500; unsigned int tries_allowed = 400; bool is_in_alt_mode; unsigned long long enter_timestamp; unsigned long long finish_timestamp; unsigned long long time_taken_in_ns; int tries_taken; DC_LOGGER_INIT(link->ctx->logger); /** * this function will only exist if we are on dcn21 (is_in_alt_mode is a * function pointer, so checking to see if it is equal to 0 is the same * as checking to see if it is null **/ if (!link->link_enc->funcs->is_in_alt_mode) return true; is_in_alt_mode = link->link_enc->funcs->is_in_alt_mode(link->link_enc); DC_LOG_DC("DP Alt mode state on HPD: %d\n", is_in_alt_mode); if (is_in_alt_mode) return true; enter_timestamp = dm_get_timestamp(link->ctx); for (tries_taken = 0; tries_taken < tries_allowed; tries_taken++) { udelay(sleep_time_in_microseconds); /* ask the link if alt mode is enabled, if so return ok */ if (link->link_enc->funcs->is_in_alt_mode(link->link_enc)) { finish_timestamp = dm_get_timestamp(link->ctx); time_taken_in_ns = dm_get_elapse_time_in_ns(link->ctx, finish_timestamp, enter_timestamp); DC_LOG_WARNING("Alt mode entered finished after %llu ms\n", div_u64(time_taken_in_ns, 1000000)); return true; } } finish_timestamp = dm_get_timestamp(link->ctx); time_taken_in_ns = dm_get_elapse_time_in_ns(link->ctx, finish_timestamp, enter_timestamp); DC_LOG_WARNING("Alt mode has timed out after %llu ms\n", div_u64(time_taken_in_ns, 1000000)); return false; } static void apply_dpia_mst_dsc_always_on_wa(struct dc_link *link) { /* Apply work around for tunneled MST on certain USB4 docks. Always use DSC if dock * reports DSC support. */ if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA && link->type == dc_connection_mst_branch && link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_90CC24 && link->dpcd_caps.branch_hw_revision == DP_BRANCH_HW_REV_20 && link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT && !link->dc->debug.dpia_debug.bits.disable_mst_dsc_work_around) link->wa_flags.dpia_mst_dsc_always_on = true; } static void revert_dpia_mst_dsc_always_on_wa(struct dc_link *link) { /* Disable work around which keeps DSC on for tunneled MST on certain USB4 docks. */ if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) link->wa_flags.dpia_mst_dsc_always_on = false; } static bool discover_dp_mst_topology(struct dc_link *link, enum dc_detect_reason reason) { DC_LOGGER_INIT(link->ctx->logger); LINK_INFO("link=%d, mst branch is now Connected\n", link->link_index); link->type = dc_connection_mst_branch; apply_dpia_mst_dsc_always_on_wa(link); dm_helpers_dp_update_branch_info(link->ctx, link); if (dm_helpers_dp_mst_start_top_mgr(link->ctx, link, (reason == DETECT_REASON_BOOT || reason == DETECT_REASON_RESUMEFROMS3S4))) { link_disconnect_sink(link); } else { link->type = dc_connection_sst_branch; } return link->type == dc_connection_mst_branch; } bool link_reset_cur_dp_mst_topology(struct dc_link *link) { DC_LOGGER_INIT(link->ctx->logger); LINK_INFO("link=%d, mst branch is now Disconnected\n", link->link_index); revert_dpia_mst_dsc_always_on_wa(link); return dm_helpers_dp_mst_stop_top_mgr(link->ctx, link); } static bool should_prepare_phy_clocks_for_link_verification(const struct dc *dc, enum dc_detect_reason reason) { int i; bool can_apply_seamless_boot = false; for (i = 0; i < dc->current_state->stream_count; i++) { if (dc->current_state->streams[i]->apply_seamless_boot_optimization) { can_apply_seamless_boot = true; break; } } return !can_apply_seamless_boot && reason != DETECT_REASON_BOOT; } static void prepare_phy_clocks_for_destructive_link_verification(const struct dc *dc) { dc_z10_restore(dc); clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); } static void restore_phy_clocks_for_destructive_link_verification(const struct dc *dc) { clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } static void verify_link_capability_destructive(struct dc_link *link, struct dc_sink *sink, enum dc_detect_reason reason) { bool should_prepare_phy_clocks = should_prepare_phy_clocks_for_link_verification(link->dc, reason); if (should_prepare_phy_clocks) prepare_phy_clocks_for_destructive_link_verification(link->dc); if (dc_is_dp_signal(link->local_sink->sink_signal)) { struct dc_link_settings known_limit_link_setting = dp_get_max_link_cap(link); link_set_all_streams_dpms_off_for_link(link); dp_verify_link_cap_with_retries( link, &known_limit_link_setting, LINK_TRAINING_MAX_VERIFY_RETRY); } else { ASSERT(0); } if (should_prepare_phy_clocks) restore_phy_clocks_for_destructive_link_verification(link->dc); } static void verify_link_capability_non_destructive(struct dc_link *link) { if (dc_is_dp_signal(link->local_sink->sink_signal)) { if (dc_is_embedded_signal(link->local_sink->sink_signal) || link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) /* TODO - should we check link encoder's max link caps here? * How do we know which link encoder to check from? */ link->verified_link_cap = link->reported_link_cap; else link->verified_link_cap = dp_get_max_link_cap(link); } } static bool should_verify_link_capability_destructively(struct dc_link *link, enum dc_detect_reason reason) { bool destrictive = false; struct dc_link_settings max_link_cap; bool is_link_enc_unavailable = link->link_enc && link->dc->res_pool->funcs->link_encs_assign && !link_enc_cfg_is_link_enc_avail( link->ctx->dc, link->link_enc->preferred_engine, link); if (dc_is_dp_signal(link->local_sink->sink_signal)) { max_link_cap = dp_get_max_link_cap(link); destrictive = true; if (link->dc->debug.skip_detection_link_training || dc_is_embedded_signal(link->local_sink->sink_signal) || link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) { destrictive = false; } else if (link_dp_get_encoding_format(&max_link_cap) == DP_8b_10b_ENCODING) { if (link->dpcd_caps.is_mst_capable || is_link_enc_unavailable) { destrictive = false; } } } return destrictive; } static void verify_link_capability(struct dc_link *link, struct dc_sink *sink, enum dc_detect_reason reason) { if (should_verify_link_capability_destructively(link, reason)) verify_link_capability_destructive(link, sink, reason); else verify_link_capability_non_destructive(link); } /* * detect_link_and_local_sink() - Detect if a sink is attached to a given link * * link->local_sink is created or destroyed as needed. * * This does not create remote sinks. */ static bool detect_link_and_local_sink(struct dc_link *link, enum dc_detect_reason reason) { struct dc_sink_init_data sink_init_data = { 0 }; struct display_sink_capability sink_caps = { 0 }; uint32_t i; bool converter_disable_audio = false; struct audio_support *aud_support = &link->dc->res_pool->audio_support; bool same_edid = false; enum dc_edid_status edid_status; struct dc_context *dc_ctx = link->ctx; struct dc *dc = dc_ctx->dc; struct dc_sink *sink = NULL; struct dc_sink *prev_sink = NULL; struct dpcd_caps prev_dpcd_caps; enum dc_connection_type new_connection_type = dc_connection_none; enum dc_connection_type pre_connection_type = link->type; const uint32_t post_oui_delay = 30; // 30ms DC_LOGGER_INIT(link->ctx->logger); if (dc_is_virtual_signal(link->connector_signal)) return false; if (((link->connector_signal == SIGNAL_TYPE_LVDS || link->connector_signal == SIGNAL_TYPE_EDP) && (!link->dc->config.allow_edp_hotplug_detection)) && link->local_sink) { // need to re-write OUI and brightness in resume case if (link->connector_signal == SIGNAL_TYPE_EDP && (link->dpcd_sink_ext_caps.bits.oled == 1)) { dpcd_set_source_specific_data(link); msleep(post_oui_delay); set_default_brightness_aux(link); } return true; } if (!link_detect_connection_type(link, &new_connection_type)) { BREAK_TO_DEBUGGER(); return false; } prev_sink = link->local_sink; if (prev_sink) { dc_sink_retain(prev_sink); memcpy(&prev_dpcd_caps, &link->dpcd_caps, sizeof(struct dpcd_caps)); } link_disconnect_sink(link); if (new_connection_type != dc_connection_none) { link->type = new_connection_type; link->link_state_valid = false; /* From Disconnected-to-Connected. */ switch (link->connector_signal) { case SIGNAL_TYPE_HDMI_TYPE_A: { sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; if (aud_support->hdmi_audio_native) sink_caps.signal = SIGNAL_TYPE_HDMI_TYPE_A; else sink_caps.signal = SIGNAL_TYPE_DVI_SINGLE_LINK; break; } case SIGNAL_TYPE_DVI_SINGLE_LINK: { sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; sink_caps.signal = SIGNAL_TYPE_DVI_SINGLE_LINK; break; } case SIGNAL_TYPE_DVI_DUAL_LINK: { sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; sink_caps.signal = SIGNAL_TYPE_DVI_DUAL_LINK; break; } case SIGNAL_TYPE_LVDS: { sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; sink_caps.signal = SIGNAL_TYPE_LVDS; break; } case SIGNAL_TYPE_EDP: { detect_edp_sink_caps(link); read_current_link_settings_on_detect(link); /* Disable power sequence on MIPI panel + converter */ if (dc->config.enable_mipi_converter_optimization && dc_ctx->dce_version == DCN_VERSION_3_01 && link->dpcd_caps.sink_dev_id == DP_BRANCH_DEVICE_ID_0022B9 && memcmp(&link->dpcd_caps.branch_dev_name, DP_SINK_BRANCH_DEV_NAME_7580, sizeof(link->dpcd_caps.branch_dev_name)) == 0) { dc->config.edp_no_power_sequencing = true; if (!link->dpcd_caps.set_power_state_capable_edp) link->wa_flags.dp_keep_receiver_powered = true; } sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX; sink_caps.signal = SIGNAL_TYPE_EDP; break; } case SIGNAL_TYPE_DISPLAY_PORT: { /* wa HPD high coming too early*/ if (link->ep_type == DISPLAY_ENDPOINT_PHY && link->link_enc->features.flags.bits.DP_IS_USB_C == 1) { /* if alt mode times out, return false */ if (!wait_for_entering_dp_alt_mode(link)) return false; } if (!detect_dp(link, &sink_caps, reason)) { link->type = pre_connection_type; if (prev_sink) dc_sink_release(prev_sink); return false; } /* Active SST downstream branch device unplug*/ if (link->type == dc_connection_sst_branch && link->dpcd_caps.sink_count.bits.SINK_COUNT == 0) { if (prev_sink) /* Downstream unplug */ dc_sink_release(prev_sink); return true; } /* disable audio for non DP to HDMI active sst converter */ if (link->type == dc_connection_sst_branch && is_dp_active_dongle(link) && (link->dpcd_caps.dongle_type != DISPLAY_DONGLE_DP_HDMI_CONVERTER)) converter_disable_audio = true; /* limited link rate to HBR3 for DPIA until we implement USB4 V2 */ if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA && link->reported_link_cap.link_rate > LINK_RATE_HIGH3) link->reported_link_cap.link_rate = LINK_RATE_HIGH3; break; } default: DC_ERROR("Invalid connector type! signal:%d\n", link->connector_signal); if (prev_sink) dc_sink_release(prev_sink); return false; } /* switch() */ if (link->dpcd_caps.sink_count.bits.SINK_COUNT) link->dpcd_sink_count = link->dpcd_caps.sink_count.bits.SINK_COUNT; else link->dpcd_sink_count = 1; set_ddc_transaction_type(link->ddc, sink_caps.transaction_type); link->aux_mode = link_is_in_aux_transaction_mode(link->ddc); sink_init_data.link = link; sink_init_data.sink_signal = sink_caps.signal; sink = dc_sink_create(&sink_init_data); if (!sink) { DC_ERROR("Failed to create sink!\n"); if (prev_sink) dc_sink_release(prev_sink); return false; } sink->link->dongle_max_pix_clk = sink_caps.max_hdmi_pixel_clock; sink->converter_disable_audio = converter_disable_audio; /* dc_sink_create returns a new reference */ link->local_sink = sink; edid_status = dm_helpers_read_local_edid(link->ctx, link, sink); switch (edid_status) { case EDID_BAD_CHECKSUM: DC_LOG_ERROR("EDID checksum invalid.\n"); break; case EDID_PARTIAL_VALID: DC_LOG_ERROR("Partial EDID valid, abandon invalid blocks.\n"); break; case EDID_NO_RESPONSE: DC_LOG_ERROR("No EDID read.\n"); /* * Abort detection for non-DP connectors if we have * no EDID * * DP needs to report as connected if HDP is high * even if we have no EDID in order to go to * fail-safe mode */ if (dc_is_hdmi_signal(link->connector_signal) || dc_is_dvi_signal(link->connector_signal)) { if (prev_sink) dc_sink_release(prev_sink); return false; } if (link->type == dc_connection_sst_branch && link->dpcd_caps.dongle_type == DISPLAY_DONGLE_DP_VGA_CONVERTER && reason == DETECT_REASON_HPDRX) { /* Abort detection for DP-VGA adapters when EDID * can't be read and detection reason is VGA-side * hotplug */ if (prev_sink) dc_sink_release(prev_sink); link_disconnect_sink(link); return true; } break; default: break; } // Check if edid is the same if ((prev_sink) && (edid_status == EDID_THE_SAME || edid_status == EDID_OK)) same_edid = is_same_edid(&prev_sink->dc_edid, &sink->dc_edid); if (sink->edid_caps.panel_patch.skip_scdc_overwrite) link->ctx->dc->debug.hdmi20_disable = true; if (sink->edid_caps.panel_patch.remove_sink_ext_caps) link->dpcd_sink_ext_caps.raw = 0; if (dc_is_hdmi_signal(link->connector_signal)) read_scdc_caps(link->ddc, link->local_sink); if (link->connector_signal == SIGNAL_TYPE_DISPLAY_PORT && sink_caps.transaction_type == DDC_TRANSACTION_TYPE_I2C_OVER_AUX) { /* * TODO debug why certain monitors don't like * two link trainings */ query_hdcp_capability(sink->sink_signal, link); } else { // If edid is the same, then discard new sink and revert back to original sink if (same_edid) { link_disconnect_remap(prev_sink, link); sink = prev_sink; prev_sink = NULL; } query_hdcp_capability(sink->sink_signal, link); } /* HDMI-DVI Dongle */ if (sink->sink_signal == SIGNAL_TYPE_HDMI_TYPE_A && !sink->edid_caps.edid_hdmi) sink->sink_signal = SIGNAL_TYPE_DVI_SINGLE_LINK; if (link->local_sink && dc_is_dp_signal(sink_caps.signal)) dp_trace_init(link); /* Connectivity log: detection */ for (i = 0; i < sink->dc_edid.length / DC_EDID_BLOCK_SIZE; i++) { CONN_DATA_DETECT(link, &sink->dc_edid.raw_edid[i * DC_EDID_BLOCK_SIZE], DC_EDID_BLOCK_SIZE, "%s: [Block %d] ", sink->edid_caps.display_name, i); } DC_LOG_DETECTION_EDID_PARSER("%s: " "manufacturer_id = %X, " "product_id = %X, " "serial_number = %X, " "manufacture_week = %d, " "manufacture_year = %d, " "display_name = %s, " "speaker_flag = %d, " "audio_mode_count = %d\n", __func__, sink->edid_caps.manufacturer_id, sink->edid_caps.product_id, sink->edid_caps.serial_number, sink->edid_caps.manufacture_week, sink->edid_caps.manufacture_year, sink->edid_caps.display_name, sink->edid_caps.speaker_flags, sink->edid_caps.audio_mode_count); for (i = 0; i < sink->edid_caps.audio_mode_count; i++) { DC_LOG_DETECTION_EDID_PARSER("%s: mode number = %d, " "format_code = %d, " "channel_count = %d, " "sample_rate = %d, " "sample_size = %d\n", __func__, i, sink->edid_caps.audio_modes[i].format_code, sink->edid_caps.audio_modes[i].channel_count, sink->edid_caps.audio_modes[i].sample_rate, sink->edid_caps.audio_modes[i].sample_size); } if (link->connector_signal == SIGNAL_TYPE_EDP) { // Init dc_panel_config by HW config if (dc_ctx->dc->res_pool->funcs->get_panel_config_defaults) dc_ctx->dc->res_pool->funcs->get_panel_config_defaults(&link->panel_config); // Pickup base DM settings dm_helpers_init_panel_settings(dc_ctx, &link->panel_config, sink); // Override dc_panel_config if system has specific settings dm_helpers_override_panel_settings(dc_ctx, &link->panel_config); //sink only can use supported link rate table, we are foreced to enable it if (link->reported_link_cap.link_rate == LINK_RATE_UNKNOWN) link->panel_config.ilr.optimize_edp_link_rate = true; if (edp_is_ilr_optimization_enabled(link)) link->reported_link_cap.link_rate = get_max_link_rate_from_ilr_table(link); } } else { /* From Connected-to-Disconnected. */ link->type = dc_connection_none; sink_caps.signal = SIGNAL_TYPE_NONE; memset(&link->hdcp_caps, 0, sizeof(struct hdcp_caps)); /* When we unplug a passive DP-HDMI dongle connection, dongle_max_pix_clk * is not cleared. If we emulate a DP signal on this connection, it thinks * the dongle is still there and limits the number of modes we can emulate. * Clear dongle_max_pix_clk on disconnect to fix this */ link->dongle_max_pix_clk = 0; dc_link_clear_dprx_states(link); dp_trace_reset(link); } LINK_INFO("link=%d, dc_sink_in=%p is now %s prev_sink=%p edid same=%d\n", link->link_index, sink, (sink_caps.signal == SIGNAL_TYPE_NONE ? "Disconnected" : "Connected"), prev_sink, same_edid); if (prev_sink) dc_sink_release(prev_sink); return true; } /* * link_detect_connection_type() - Determine if there is a sink connected * * @type: Returned connection type * Does not detect downstream devices, such as MST sinks * or display connected through active dongles */ bool link_detect_connection_type(struct dc_link *link, enum dc_connection_type *type) { uint32_t is_hpd_high = 0; if (link->connector_signal == SIGNAL_TYPE_LVDS) { *type = dc_connection_single; return true; } if (link->connector_signal == SIGNAL_TYPE_EDP) { /*in case it is not on*/ if (!link->dc->config.edp_no_power_sequencing) link->dc->hwss.edp_power_control(link, true); link->dc->hwss.edp_wait_for_hpd_ready(link, true); } /* Link may not have physical HPD pin. */ if (link->ep_type != DISPLAY_ENDPOINT_PHY) { if (link->is_hpd_pending || !dpia_query_hpd_status(link)) *type = dc_connection_none; else *type = dc_connection_single; return true; } if (!query_hpd_status(link, &is_hpd_high)) goto hpd_gpio_failure; if (is_hpd_high) { *type = dc_connection_single; /* TODO: need to do the actual detection */ } else { *type = dc_connection_none; if (link->connector_signal == SIGNAL_TYPE_EDP) { /* eDP is not connected, power down it */ if (!link->dc->config.edp_no_power_sequencing) link->dc->hwss.edp_power_control(link, false); } } return true; hpd_gpio_failure: return false; } bool link_detect(struct dc_link *link, enum dc_detect_reason reason) { bool is_local_sink_detect_success; bool is_delegated_to_mst_top_mgr = false; enum dc_connection_type pre_link_type = link->type; DC_LOGGER_INIT(link->ctx->logger); is_local_sink_detect_success = detect_link_and_local_sink(link, reason); if (is_local_sink_detect_success && link->local_sink) verify_link_capability(link, link->local_sink, reason); DC_LOG_DC("%s: link_index=%d is_local_sink_detect_success=%d pre_link_type=%d link_type=%d\n", __func__, link->link_index, is_local_sink_detect_success, pre_link_type, link->type); if (is_local_sink_detect_success && link->local_sink && dc_is_dp_signal(link->local_sink->sink_signal) && link->dpcd_caps.is_mst_capable) is_delegated_to_mst_top_mgr = discover_dp_mst_topology(link, reason); if (is_local_sink_detect_success && pre_link_type == dc_connection_mst_branch && link->type != dc_connection_mst_branch) is_delegated_to_mst_top_mgr = link_reset_cur_dp_mst_topology(link); return is_local_sink_detect_success && !is_delegated_to_mst_top_mgr; } void link_clear_dprx_states(struct dc_link *link) { memset(&link->dprx_states, 0, sizeof(link->dprx_states)); } bool link_is_hdcp14(struct dc_link *link, enum signal_type signal) { bool ret = false; switch (signal) { case SIGNAL_TYPE_DISPLAY_PORT: case SIGNAL_TYPE_DISPLAY_PORT_MST: ret = link->hdcp_caps.bcaps.bits.HDCP_CAPABLE; break; case SIGNAL_TYPE_DVI_SINGLE_LINK: case SIGNAL_TYPE_DVI_DUAL_LINK: case SIGNAL_TYPE_HDMI_TYPE_A: /* HDMI doesn't tell us its HDCP(1.4) capability, so assume to always be capable, * we can poll for bksv but some displays have an issue with this. Since its so rare * for a display to not be 1.4 capable, this assumtion is ok */ ret = true; break; default: break; } return ret; } bool link_is_hdcp22(struct dc_link *link, enum signal_type signal) { bool ret = false; switch (signal) { case SIGNAL_TYPE_DISPLAY_PORT: case SIGNAL_TYPE_DISPLAY_PORT_MST: ret = (link->hdcp_caps.bcaps.bits.HDCP_CAPABLE && link->hdcp_caps.rx_caps.fields.byte0.hdcp_capable && (link->hdcp_caps.rx_caps.fields.version == 0x2)) ? 1 : 0; break; case SIGNAL_TYPE_DVI_SINGLE_LINK: case SIGNAL_TYPE_DVI_DUAL_LINK: case SIGNAL_TYPE_HDMI_TYPE_A: ret = (link->hdcp_caps.rx_caps.fields.version == 0x4) ? 1:0; break; default: break; } return ret; } const struct dc_link_status *link_get_status(const struct dc_link *link) { return &link->link_status; } static bool link_add_remote_sink_helper(struct dc_link *dc_link, struct dc_sink *sink) { if (dc_link->sink_count >= MAX_SINKS_PER_LINK) { BREAK_TO_DEBUGGER(); return false; } dc_sink_retain(sink); dc_link->remote_sinks[dc_link->sink_count] = sink; dc_link->sink_count++; return true; } struct dc_sink *link_add_remote_sink( struct dc_link *link, const uint8_t *edid, int len, struct dc_sink_init_data *init_data) { struct dc_sink *dc_sink; enum dc_edid_status edid_status; if (len > DC_MAX_EDID_BUFFER_SIZE) { dm_error("Max EDID buffer size breached!\n"); return NULL; } if (!init_data) { BREAK_TO_DEBUGGER(); return NULL; } if (!init_data->link) { BREAK_TO_DEBUGGER(); return NULL; } dc_sink = dc_sink_create(init_data); if (!dc_sink) return NULL; memmove(dc_sink->dc_edid.raw_edid, edid, len); dc_sink->dc_edid.length = len; if (!link_add_remote_sink_helper( link, dc_sink)) goto fail_add_sink; edid_status = dm_helpers_parse_edid_caps( link, &dc_sink->dc_edid, &dc_sink->edid_caps); /* * Treat device as no EDID device if EDID * parsing fails */ if (edid_status != EDID_OK && edid_status != EDID_PARTIAL_VALID) { dc_sink->dc_edid.length = 0; dm_error("Bad EDID, status%d!\n", edid_status); } return dc_sink; fail_add_sink: dc_sink_release(dc_sink); return NULL; } void link_remove_remote_sink(struct dc_link *link, struct dc_sink *sink) { int i; if (!link->sink_count) { BREAK_TO_DEBUGGER(); return; } for (i = 0; i < link->sink_count; i++) { if (link->remote_sinks[i] == sink) { dc_sink_release(sink); link->remote_sinks[i] = NULL; /* shrink array to remove empty place */ while (i < link->sink_count - 1) { link->remote_sinks[i] = link->remote_sinks[i+1]; i++; } link->remote_sinks[i] = NULL; link->sink_count--; return; } } }