#
# ARM CPU Frequency scaling drivers
#

config ARM_BIG_LITTLE_CPUFREQ
	tristate "Generic ARM big LITTLE CPUfreq driver"
	depends on ARM_CPU_TOPOLOGY && PM_OPP && HAVE_CLK
	select CPU_FREQ_TABLE
	help
	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.

config ARM_DT_BL_CPUFREQ
	tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
	depends on ARM_BIG_LITTLE_CPUFREQ && OF
	help
	  This enables probing via DT for Generic CPUfreq driver for ARM
	  big.LITTLE platform. This gets frequency tables from DT.

config ARM_EXYNOS_CPUFREQ
	bool "SAMSUNG EXYNOS SoCs"
	depends on ARCH_EXYNOS
	default y
	help
	  This adds the CPUFreq driver common part for Samsung
	  EXYNOS SoCs.

	  If in doubt, say N.

config ARM_EXYNOS4210_CPUFREQ
	def_bool CPU_EXYNOS4210
	help
	  This adds the CPUFreq driver for Samsung EXYNOS4210
	  SoC (S5PV310 or S5PC210).

config ARM_EXYNOS4X12_CPUFREQ
	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
	help
	  This adds the CPUFreq driver for Samsung EXYNOS4X12
	  SoC (EXYNOS4212 or EXYNOS4412).

config ARM_EXYNOS5250_CPUFREQ
	def_bool SOC_EXYNOS5250
	help
	  This adds the CPUFreq driver for Samsung EXYNOS5250
	  SoC.

config ARM_EXYNOS5440_CPUFREQ
	def_bool SOC_EXYNOS5440
	depends on HAVE_CLK && PM_OPP && OF
	help
	  This adds the CPUFreq driver for Samsung EXYNOS5440
	  SoC. The nature of exynos5440 clock controller is
	  different than previous exynos controllers so not using
	  the common exynos framework.

config ARM_HIGHBANK_CPUFREQ
	tristate "Calxeda Highbank-based"
	depends on ARCH_HIGHBANK
	select CPU_FREQ_TABLE
	select GENERIC_CPUFREQ_CPU0
	select PM_OPP
	select REGULATOR

	default m
	help
	  This adds the CPUFreq driver for Calxeda Highbank SoC
	  based boards.

	  If in doubt, say N.

config ARM_IMX6Q_CPUFREQ
	tristate "Freescale i.MX6Q cpufreq support"
	depends on SOC_IMX6Q
	depends on REGULATOR_ANATOP
	help
	  This adds cpufreq driver support for Freescale i.MX6Q SOC.

	  If in doubt, say N.

config ARM_INTEGRATOR
	tristate "CPUfreq driver for ARM Integrator CPUs"
	depends on ARCH_INTEGRATOR
	default y
	help
	  This enables the CPUfreq driver for ARM Integrator CPUs.
	  If in doubt, say Y.

config ARM_KIRKWOOD_CPUFREQ
	def_bool ARCH_KIRKWOOD && OF
	select CPU_FREQ_TABLE
	help
	  This adds the CPUFreq driver for Marvell Kirkwood
	  SoCs.

config ARM_OMAP2PLUS_CPUFREQ
	bool "TI OMAP2+"
	depends on ARCH_OMAP2PLUS
	default ARCH_OMAP2PLUS
	select CPU_FREQ_TABLE

config ARM_S3C2416_CPUFREQ
	bool "S3C2416 CPU Frequency scaling support"
	depends on CPU_S3C2416
	help
	  This adds the CPUFreq driver for the Samsung S3C2416 and
	  S3C2450 SoC. The S3C2416 supports changing the rate of the
	  armdiv clock source and also entering a so called dynamic
	  voltage scaling mode in which it is possible to reduce the
	  core voltage of the cpu.

	  If in doubt, say N.

config ARM_S3C2416_CPUFREQ_VCORESCALE
	bool "Allow voltage scaling for S3C2416 arm core"
	depends on ARM_S3C2416_CPUFREQ && REGULATOR
	help
	  Enable CPU voltage scaling when entering the dvs mode.
	  It uses information gathered through existing hardware and
	  tests but not documented in any datasheet.

	  If in doubt, say N.

config ARM_S3C64XX_CPUFREQ
	bool "Samsung S3C64XX"
	depends on CPU_S3C6410
	default y
	help
	  This adds the CPUFreq driver for Samsung S3C6410 SoC.

	  If in doubt, say N.

config ARM_S5PV210_CPUFREQ
	bool "Samsung S5PV210 and S5PC110"
	depends on CPU_S5PV210
	select CPU_FREQ_TABLE
	default y
	help
	  This adds the CPUFreq driver for Samsung S5PV210 and
	  S5PC110 SoCs.

	  If in doubt, say N.

config ARM_SA1100_CPUFREQ
	bool

config ARM_SA1110_CPUFREQ
	bool

config ARM_SPEAR_CPUFREQ
	bool "SPEAr CPUFreq support"
	depends on PLAT_SPEAR
	select CPU_FREQ_TABLE
	default y
	help
	  This adds the CPUFreq driver support for SPEAr SOCs.